Dynamic modification is not working

Dear Friends,
I have created a dynamic modification rule as below:
1) at lot creation
2)
stage.   inspsevr.    skip.      ISt.            short text.       stage ch.    no of insp. max skip dur. new stage.    no. rej.   new stage
10        4                            initial                Insp1                x                    1                                     20                1               10
20                         skip                             no insp               x                    2           10 days            20                1                10
3) What do I expect?
After 1 inspection & acceptace 2 lots should be skipped, then again inspection.
But this not happening. every time I have to do results recording, UD and Stock posting.
4) Material master settings
100% inspection, inspection with task list, automatic assignments, check char,
5) lot is created after each GR for batch & material combination
6) QP01
I have assigned the dynamic modification rule at header level & at lot level.
Regards

Hello Friends,
Thanks for your support & sorry for the delayed reply.
I have progressed in DMR & it is working.
I have configured as below.
1) Defined DMR with stages (2 skips after one OK condition)
2) Activated DMR at usage decision.
3) Assigned the DMR at inspection plan header level at material and task list level.
4) SKIP check box ticked in material master
Results are as below:
1) First lot created with status results recording required.
2) The next inspection stage in the quality level is not updated till the time I dont complete UD for the previous lot.
3) After I do UD the next stage is updated depending upon accepatance or rejection of characteristics.
4) If I dont do UD for the previous lots then inspection stage does not change for the next lots. Ex: If the next stage is a SKIP then "n" number of lots are skipped till the time I dont coplete the UD for one of previous lots.
5) But I cant activate DMR at lot creation level because I cant skip lots w/o confirming the results recording.
These are my observations. Request to comment.
Regards

Similar Messages

Why Dynamic Parameter is not working, when i create report using stored procedure ?

Post Author: Shashi Kant
CA Forum: General
Hi all
Why Dynamic Parameter is not working, when i create report XI using stored procedure ?
Only i shaw those parameters which i used in my stored procedure, the parameter which i create dynamic using stored procedure
is not shown to me when i referesh the report for viewing the results.
I have used the same procedure which i mention below but can not seen the last screen which is shown in this .
============================================================================================
1. Select View > Field Explorer2. Right-click on Parameter Fields and select New from the right-click menu.3. Enter u201CCustomer Nameu201D as the name for your parameter4. Under u201CList of Valuesu201D select u201CDynamicu201D5. Under the Value column, click where is says u201Cclick here to add itemu201D and select Customer Name from the drop-down list. The dialog shown now look like the one shown below in Figure 1. Click OK to return to your report design.
Dynamic Parameter Setup6. Next, select Report > Select Expert, select the Customer Name field and click OK.7. Using the drop-down list beside select u201CIs Equal Tou201D and using the drop-down list, select your parameter field (it should be the first field). 8. Click OK to return to your report design and see the parameter dialog.The parameter dialog will appear and show you a dynamic list of values that is updated each time your run your report. It couldnu2019t be easier! In our next tutorial, we will be looking at how to use this feature to create cascading parameter fields, where the values are filtered by the preceding selection.
Dynamic Parameters in Action
My question is that whether dynamic parameter is working with storedprocedure or not.
When i added one table and try to fetch records using dyanmic prameters. after that i am not be able to find the dynamic parameter option when i referesh my report.
One more thing when i try the static parameter for my report, the option i see when i referesh the screen.
Please reply soon , it's urgent
Regards
shashi kant

Hi Kishore,
I have tested the issue step by step by following you description, while the first issue works well in my local environment. Based on my research, this can be caused by the lookup expression or it indeed return Male value based on the logic. If you use the
expression below, it will indeed only return the Male record. So please try to double-check the record in the two datasets and the expression in your environment:
=lookup(first(Fields!ProgramID.Value,"DataSet1"),Fields!ProgramID.Value,Fields!Gender.Value,"DataSet2")
As to the second issue, please try to use the following expression:
=Count(Lookup(fields!ProgramID.value,fields!ProgramID.value,fields!Gender.value,"DataSet2"))
Besides, if this issue still exist, in order to trouble shoot this issue more efficiently, could you please post both the .rdl file with all the size properties to us by the following E-mail address? It is benefit for us to do further analysis.
E-mail: [email protected]
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Premiere Pro to Adobe Audition Dynamic link does not work. Cannot edit audio in Audition.

Trying to edit Audio from Premiere Pro within Audition thru the Dynamic link but it does not fire up Audition to edit. Seems like a common problem/bug. But no one has posted a solution. Please Help
-Windows 7
-Premiere Pro CC 2014
-Adobe Audition CC 2014

You dont understand it was all working fine in the previous Adobe versions. matter of fact you can go on youtube and see a couple of videos that shows the work flow between Premiere Pro and audition by way of Dynamic link. If you edit a video clip in Premier Pro and want to add some music or simply edit the audio that is contained in the video there was a time within Premiere Pro you can just right click "Edit in Adobe Audition" and Audition would open with the audio clip in place. Much in the same way Premiere Pro works with After Effects thru the Dynamic Link. The Dynamic Link is the bridge between applications to work with each other. For some reason Premiere Pro and Audition Dynamic Link is not working properly.

Cascading Dynamic Parameters Do Not Work In Crystal Viewer 2008?

I have generated a report with Crystal Reports 2008 that uses a dynamic cascading parameter. I work in waste management and the report I create in Crystal is used as a "template" with the tonnages collected from all of our customers. Our less technically minded employees can then open this report with Crystal Reports Viewer 2008, use the drop down menus to select only the customer they need a report for and then export this to PDF for delivery.
The report as designed works perfectly in Crystal Reports, but the parameter does not work in Crystal Viewer.
Some of our customers have more than one physical location that we service. The cascading dynamic parameter in my report allows you to select the customer name, and then it only shows the locations linked to that customer, so the end user can select only the relevant location(s) for the report. The cascading parameter is dynamic and allows multiple selections, and is linked to a Saved Data formula. The report is saved with the data.
When the report is opened in Viewer, one of two things happens. If the report is saved in Crystal Reports and a specific customer/location is selected, then ONLY those selected customer/locations are available in the Viewer. If ALL the customers/locations are selected in Crystal Reports and saved, then in the Viewer they are all available, but selecting one customer does NOT narrow down the locations (i.e. it does not "cascade") and instead ALL of the locations are available even if they do not apply to the customer.
If I use a single dynamic parameter and select ALL of the customers (for example), then when this is opened in Crystal Viewer all of the customers are available from the parameters drop down and the report works fine. As soon as this is tried with a cascading parameter however, Crystal Viewer falls down.
Does anyone know of a workaround to this or if there is something I am doing wrong?

I am using the free Crystal Report 2008 Viewer along with designing reports with Crytal Reports ver 12.3. With a test file from SAP called "Interactive Parameters", the parameter feature works to refresh the report. The parameters that are supplied in the sample report work with Viewer. They show up under the parameter list in the parameter side panel in Viewer and are available to make record selections. When I add a parameter to the sample report in Crystal 2008 and then view the report in Viewer, my parameters are unavalable for record selection while the original parameters remain available. Futher, my parameters are displayed under a section called "Current Data Set" in the Parameter side panel, while the selectable parameters are displayed under the "Parameter" section in the parameter side panel. There must be a setting that is treating the parameters I create differently form the parameters created in the original sample report. Any help would be appreciated.

Why is my symbol loaded dynamically from library not working?

Hope someone could help,
The code in "Example1" work fine if the video symbol is located on the stage. But what I'm trying to do is load the video symbol from the library dynamically and that doesn't work as illustrated in "Example2".
My question is why does Example1 work and Example2 not work?
Example1:
var youtube = $("<iframe/>");
sym.$("video").append(youtube);
youtube.attr('type', 'text/html');
youtube.attr('width', '560');
youtube.attr('height', '315');
youtube.attr('src', 'https://www.youtube.com/embed/A3PDXmYoF5U');
youtube.attr('frameborder','0');
youtube.attr('allowfullscreen', '0');
Example2:
sym.myVideo;
sym.myVideo = sym.createChildSymbol("video", "Stage");
var youtube = $("<iframe/>");
sym.$("myVideo").append(youtube);
youtube.attr('type', 'text/html');
youtube.attr('width', '560');
youtube.attr('height', '315');
youtube.attr('src', 'https://www.youtube.com/embed/A3PDXmYoF5U');
youtube.attr('frameborder','0');
youtube.attr('allowfullscreen', '0');
Thanks in advanced,
-Angel

Have you tried a reset:
Hold the Sleep and Home button down for about 10 second until you see the Apple logo.

Crystal Reports dynamic parameter does not work in InfoView

Hello,
We have developed Crystal Reports in CR2008 on top of SAP infoset and we have one of our selection parameter as dynamic parameter. It works fine in the CR Dev tool but when i upload the report in the InfoView, report does not show any value in the "Available Values"
Any input will be much appreciated.
Thanks.

I did found the solution for this, i had to go into Business View Manger (BO Client Tools) and Schedule the LOV (List of Values). This is odd setting! but it works....

Populating Text Field using Dynamic Actions is not working

I've a Select List (P14_ACCOUNT) and Text Field (P14_BILLING_ADDRESS_1) on a form. On selecting a value on the Select List, I've to populate the Text Fields by fetching its values from the database by using the Select List value as the primary key. To do this, I created a Dynamic Actions (Advanced) on the Select List, with event onchange and Set Value as SQL. However this is not working.
Below are the sqls of Select List and Dynamic Action respectively:
select ACCOUNT_NO || ' - ' || COMPANY_NAME display_value, ACCOUNT_ID return_value
from ACCOUNT
order by 1
select a.address1 from account a where a.account_id = :P14_ACCOUNTNow when I substitute the Dynamic Action sql with any of the below sqls, the value shows up:
select address1 from account where account_id = 41
select address1 from account where rownum=1
select user from dualI thought of seeing the value of :P14_ACCOUNT in session or debug, but session does not show any value and on clicking debug it throws a popup message "Debugging is not enabled for this application."
I've been trying since few hours but with no luck. How can I debug further?
Thanks for the help.
--Hozy

Hozy,
Take alook at your application on apex.oracle.com
The session state for items, when SQL is used, is set using the Page Items to Submit parameter as has been set in your application.
Regards,

Adobe Dynamic Link will not work - Premiere Pro CS4 to After Effects CS4

Hello,
I am edited a video with a deadline, I'm importing a sequence from Premiere Pro CS4 to After Effects and making edits in After Effects. I'm able to import the Premiere Pro sequence into After Effects using Dynamic Link, but I go back to Premiere Pro and nothing has changed. Then I have to export the 21 minute long video in After Effects and that takes about 12 hours, that I can't afford. I don't know what I'm doing wrong, before I imported the timeline into AE, while I was in Premiere Pro I right clicked it and selected -Edit original. It took me to the .mov that I imported- since it's a redo. I learned how to use Dynamic Link from this tutorial-
http://tv.adobe.com/watch/learn-cs4-production-premium/using-dynamic-link/
At first when Dynamic link didn't work I thought it was because I was cutting the imported Sequence from Premiere Pro in After Effects becasue I was motion tracking. When you import a Premier Pro sequence can you cut it into individual layers in After Effects?

I'm importing a sequence from Premiere Pro CS4 to After Effects
That doesn't create the type of Link you want here. In this case, changes made to PP would show up in AE. You want the reverse. (And you can only go one way, not both.)
http://help.adobe.com/en_US/PremierePro/4.0/WS725e431141e7ba651172e081238226cdf5-8000.html

Dynamic image does not work in the template builder plug-in (Apex-BI Intgr)

Hi all, I posted this problem in the BI Publisher topic but nobody responded maybe this is because mods thought this is an Apex-BI integration issue.
If I'm in the wrong place, please do warn me.
The documentation says:
Direct Insertion
Insert the jpg, gif, or png image directly in your template.
...This works obviously
URL Reference
1. Insert a dummy image in your template.
2. In Microsoft Word's Format Picture dialog box select the Web tab. Enter the following syntax in the Alternative text region to reference the image URL:
url:{'http://image location'}
For example, enter: url:{'http://www.oracle.com/images/ora_log.gif'}
...This works too when I hardcode an url as url:{'http://www.google.com.tr/images/firefox/mobiledownload.png'}
Element Reference from XML File
1. Insert a dummy image in your template.
2. In Microsoft Word's Format Picture dialog box select the Web tab. Enter the following syntax in the Alternative text region to reference the image URL:
url:{IMAGE_LOCATION}
where IMAGE_LOCATION is an element from your XML file that holds the full URL to the image.
...This, however, does not work.
I use Apex' report query tool and My query is like
select 'http://www.google.com.tr/images/firefox/mobiledownload.png' IMAGE_LOCATION from ... (a single result set for my template)
the xml data is generated with an IMAGE_LOCATION tag. I load it to word template plug-in. The Url successfully displays in the report if I make it a plain-simple field.
But when it's in the image format->web->alt text as url:{IMAGE_LOCATION} no image displayed.
I need to keep this design procedure simple so a simple word user could design a report via using just template builder plug-in. I don't wish to explore the xsl-fo area...yet.
Could you tell me why I can't get this url:{IMAGE_LOCATION} to work?
Regards
PS: My BI version: 10.1.3.4.1

Hi Oeren,
your steps seem basically to be correct. I have a tutorial how to do this here (in german)
http://www.oracle.com/webfolder/technetwork/de/community/apex/tipps/pdf-dyn-images/index.html
when you see the URL corrently as long as you have it as a plain text field, the XML tag and the
referencing seem to be OK.
Here are two thought - the issue might be one of these ...
How did you insert the dummy image into the word document - did you do it via "insert" or
via "link to file". "Link to File" does not work - you must choose the simple "insert".
Another one: Does your BI Server have a connection to the internet - is the proxy server correctly set ..?
Does this help ..?
Regards
-Carsten
Cloud Computing mit APEX umsetzen. Jetzt!
http://tinyurl.com/apexcloudde
SQL und PL/SQL: Tipps, Tricks & Best Practice
http://sql-plsql-de.blogspot.com

My dynamic script is not working

Hi SDN,
I have written below code in Javascript to make subform invisible depending upon a checkbox but it not working
please let me know where i am making a mistake.
if (data.test.CheckBox1 == '')
data.test.Subform1.presence = "hidden";
else
data.test.Subform1.presence = "visible";
regards
rahul

Use data.test.CheckBox1.rawValue (the rawValue part as added).
To be able to find all the obstacles yourself, rad the scripting guide here:
http://www.adobe.com/devnet/livecycle/articles/lc_designer_scripting_basics/lc_designer_scripting_basics.pdf
Regards Otto

Dynamic IP Address not working on MBP

Hello:
I am experiencing a problem with my MacBook Pro not being able to assign an IPv4 IP Address when "Using DHCP" is selected for either a wifi or ethernet connection. In order to be able to connect either device, I have to manually add an address (i.e., 192.168.0.36) & use "Using DHCP with manual address" instead.
It is interesting to note that all other devices on my home network work perfectly and all use DHCP and have addresses assigned to them. These devices include iPad's, iPhone's, AppleTV, etc... The only device that does not work is my MacBook Pro. Thinking it was a network issue, I reset my DSL router as well as my Airport Extreme to default settings and re-configured my network. This proved to be of no use.
Has anyone else expierienced this issue and know a possible solution?
Thanks in Advance.

If you have the public on the WAN of the router, you do not need it on the server. The server wants to be a static on the same range as the LAN of the router. If you have the router LAN set as 192.168.1.1 (which is the default of most out there)
you want the IP of the server to be something like 192.168.1.10, with the same subnet mask of the LAN of the router (Usually 255.255.255.0) and the Default Gateway of the server to be the LAN IP of the router (in this example: 192.168.1.1). For DNS,
you probably want to set the LAN IP of the router, as the router should send any requests to the public DNS set by the ISP.
This should get the server back online.

VPN Client and Dynamic isakmp keys not working

Hi,
I'm trying to enable DMVPN endpoints from dynamic IP addresses, e.g. adding in:
crypto isakmp key XXXXXXX address 0.0.0.0 0.0.0.0 no-xauth
The problem is when I add this line, it breaks our remote VPN Client. Removing the line makes everything work fine again, except I can't add a DMVPN endpoint that has a dynamic IP.
Presently all DMVPN spokes have static IP addresses configured and individual keys for each (I'm trying to simply/cut down our config and use a single key for all of them plus enable staff from home on dynamic IP's).
I can't tell if this is an IOS bug, or if I need to configure something differently.
Our VPN client is configured as a dynamic map, e.g.:
crypto isakmp client configuration group vpnclient
key RAH RAH RAH
etc.
crypto isakmp profile vpnclient
   match identity group vpnclient
   client authentication list vpnuser
   isakmp authorization list vpngroup
   client configuration address respond
crypto ipsec transform-set VPNCLIENT esp-aes 256 esp-sha-hmac
crypto dynamic-map vpnclient 10
set transform-set VPNCLIENT
set pfs group2
set isakmp-profile vpnclient
crypto map vpn 65535 ipsec-isakmp dynamic vpnclient
And then attached to my WAN interface as crypto map.

Hi Scott,
What IOS Version are you using ? I don't see any reason that this command would break Remote VPN Connectivity.
Maybe you can try
crypto isakmp key XXXXXXX address 0.0.0.0 0.0.0.0 (remove the no-xauth, as it's not needed).
Otherwise, you may share output of debug crypto isakmp to see exactly what is failing when the remote users are connecting.
Regards,
Bastien

DATACOPY from Dynamic Calc Member not working

Hello,
I have a BR to Copy from one Scenario to another. I let the user chose the Scenario via RTP. When they chose a dynamic calc scenario no data is copied.
Here is the Rule
SET CREATENONMISSINGBLK ON;
SET COPYMISSINGBLOCK ON;
FIX(Dec, "Daten brutto", "Daten_brutto_P_M")
DATACOPY [TEBIT_COPY_Year_Source]->[TEBIT_COPY_Scenario_Source]->Final TO [TEBIT_COPY_Year_Target]->[TEBIT_COPY_Scenario_Target]->Version_1;
ENDFIX
I fix on some specific Members an then copy from a specific Year->Scenario combination the Final Version to another Year->Scenario combination Version_1. Doing this with a store Scenario works, with a dynamic calc Scenario it doesnt.
Thx for your Help.

Kevin,
Unfortunately, I think this is the way it works. DATACOPY will not copy dynamically calculated members to stored members.
Although it is not in the DATACOPY Tech Ref documentation, that's the way it works.
Here are some older threads on the "other" board:
http://www.network54.com/Forum/58296/thread/1184768427/DATACOPY+Help
http://www.network54.com/Forum/58296/thread/1054220911/Datacopy+Problem
You are going to have to come up with another way of copying the Scenario by summing the members into the target Scenario. It can be a pain because you're going to have to mind the creation of the blocks. SET CREATEBLOCKONEQ will be your friend on this one.
Regards,
Cameron Lackpour

Last value in hierarchy of Dynamic parameters is not working in BO CMC

I have a crystal report with dynamic parameters up to 4 levels (Hierarchy of 4 levels) that is developed on version 12.3.0.601 which is working fine on my system... But when the same was uploaded on Business Objects Central Management Console version is 3.1x first 3 hierarchies are populating fine but when comes to 4th hierarchy I am only getting the values that are linked to First Value of 2nd hierarchy.
Example:
If I take the example of the organization following is the hierarchy.
1st : business head // One Value
2nd : Project head // 4 values (p1,p2,p3,p4)
3rd : Team head // 1 value
4th: developer // 2 values for every project head that means total of 8 values.
If 2nd hierarchy is p1,p2,p3,p4 then I am getting only 2 values of P1, In the same way if 2nd hierachy is p2,p1,p3,p4 then I am getting only 2 values that is of P2... but in real I need to total of 8 values because of all 4 parameters are selected at run time in 2nd level of hierarchy.
I have tried all possible combinations of dynamic paramters but nothing was working for me...
Problem is only in Business Objects CMC where the dynamic parameter is prompt is wrong in dev system everything is correct.
Experts please help me in this.. I hope I have explained it clear... If not please let me know will provide more information.
Thanks for your time.
Siva
Message was edited by: siva kumar

" there are more than 170 similar list of values as _1, _2..._170"
That's what happens when you build your prompts in the report and chose "update the repository" every time you save it to BO.
For the future, you have a couple of options for initially creating dynamic prompts:
1. Create them directly in the BVM (all of the various pieces...)
2. Create them in Crystal, publish them to the repository only the first time you save the report, and then use the BVM for any maintenance.
3. Create a "dummy" report that just has in it the data you need for a single dynamic prompt. Then create a dynamic parameter in the report based on that prompt. Save it to your favorites folder, making sure that you update the repository so that the LOV gets created. Again, use the BVM for any maintenance. (My personal favorite way to do these...)
For options 2 and 3, a _DC will be created each time you update the repository. However, best practice is to have a single "common" _DC for each database you connect to. So, after saving the LOV you would then open the BVM, modify the _DF so that is points to the correct "common" _DC and then delete the new _DC.
What I would do in your current situation depends on how many reports you have that access the same type of dynamic parameter. If you have one or just a few reports using this same 4-level hierarchy prompts, I would do the following:
1. Delete all but the first set of BVM objects for the LOV (the ones without any numbers on the end).
2. Edit this set of BVM objects so that it has all of the information you're looking for.
3. Edit each report and set the dynamic parameter to point to this single LOV.
If you have more reports than you can comfortable edit right now, I would still modify the first set of BVM objects to set them up as the common LOV. Then you can do this:
1. As you edit each report, log on to the repository (on the File menu or in the Repository Explorer).
2. Edit the parameter and determine which set of objects it's pointing to.
3. Point the parameter to the common LOV.
4. Open the BVM and delete the set of objects that you found in step 2.
-Dell

Custom Dynamic Stamp Java not working in WIN7

I currently was upgraded from WinXP to WIN7. Running Acrobat Prof 8 with all the updates. I created a dozen customized dynamic stamps that grab info and date/time from the system. Using the following java, the stamps worked perfectly.
event.value = (new Date()).toString();
AFDate_FormatEx(",m/d/yy");
event.value = " " + (identity.name || identity.loginName) + " - " + event.value;
In WIN 7, I am getting a long date and time with no identity.
HELP
Ken Panthen
Albany, NY

GK,
I tried a completely new file from scratch, used your script and it did not pick up the user, it used a long date format, etc. Here is a sample of what I got. I only want the short date and name. No time zone. No name appears. It should be KPanthen.

Dynamic modification is not working

Similar Messages

Maybe you are looking for