Dynamic monitorin service documentation

hi
Can any one tell me where i can find the documentation about the Dynamic Monitoring Service present in the Oralce 9i application server 1.0.2.2. Also i need info on what are the servlets that provides the DMS information and how to access them. Your reply would be of great help to me
Thanks
anand

Hello Anand,
sorry for the delay, we had updated our 'Using DMS' document.
I have sent a copy to your email address.
Hope it helps.
- Stefan

Similar Messages

Dynamic Monitoring Service on Apache where?

I am unable to find any documentation that tells me how to invoke Dynamic Monitoring Service module on Apache from a client browser. Someone please tell me the url to do this and tell me what oracle documentation contains this information and where on technet this document resides.
Thanks!
Dev

someone from the HTTP server group will answer your question, drop me an email if there is no reply within 2 days.
Regards,
--Tao

Welcome to the Novell Dynamic File Services Forum

Welcome to the new Novell Dynamic File Services forum. You can find information
about this product here: http://www.novell.com/products/dynamic-file-services/
This forum is for discussions about this product.

Hi,
I'd like to use the http dynamic streaming functionality in my own video player. So far my investgations have led me to
1) Try to see how the OSMF have implemented the classes (although I read the code I cant get ay to compile so I have abandoned this thread)
2) Looked at earlier tutorials highlighting the use of rtmp dynamic classes (http://www.adobe.com/devnet/flashmediaserver/articles/dynstream_advanced_pt1.html) although this alludes to the newer http features there is no example and what there is uses Flash as an environment
3) Browsed the forums.
We use flex to build our player. Is there an "from scratch" example of how to code a http dynamic player in code.
Thanks,

Setup dynamic Web Service Data Source

Hi all,
is there a way to setup a "dynamic" web service data source like
WSDL-URL = 'http://${server_ip}:${server_port}/XYZService?wsdl
and passing in the server_ip and server_port variables from outside upon document rendering?
As far as we have seen, there is not way to do so - leaving us with a static web service data source configuration that is only able to point to one specific WSDL.
The use case we have here goes like this:
1) We have one specific template for a specific document to be rendered.
2) Depending on the caller, the data source must be different, i.e. the same web service at different endpoint addresses must be called to fetch the right data.
Any ideas?
Thanks in advance.
Best regards,
Stefan

Hi Klaus,
thanks for your reply. We also had that idea with the router web service ;-) But a little more flexibility would be great for us due to our decentralized system landscape.
Currently, we are in the evaluation phase of BI publisher to replace our local reports (sales documents) with BI Publisher reports having one central instance of BI Publisher and n local store instances all providing a getSalesDocument() web service.
To be able to call the correct web service, a dynamic config of web service endpoints would be helpful.
Best regards,
Stefan

Problem in passing/returning objects over dynamic web service call

Hi Friends,
I am beginner in java web service.
Here is the problem I am facing when I pass/return user defined objects to remote web service method using dynamic we service call.
The client can call the remote web service method in 2 ways.
1. By generating client stubs using WSDL file
- In this case, I am able to pass/return the user defined objects to remote method without any issue only when the server side web services are deployed in any server(jboss)
- But in java 1.6 & above, the web services can be deployed without server using endpoint. In this case, I am not able to pass/return objects over web service calls.
2. Without generating client stubs (dynamic web service call)
- This will establish a connection at run time using the given WSDL file (I have attached the document). I have to form an XML(This will contain API name, arguments) string as input at run time
- In this case, it allows only string as argument while passing & returning.
Please let me know if you can help me on this.
Regards,
pani

I'm not sure about your question, but this might help:
[http://forum.java.sun.com/thread.jspa?threadID=5251188|http://forum.java.sun.com/thread.jspa?threadID=5251188]
You might also want to read on JAXB.

Is a Dynamic DNS Service included in my FiOS Bundle?

I have the FiOS TV, Phone & Internet Bundle (internet upgraded for $5 extra for faster speeds) and switched from Cable.
I know that Cable provided all of their Boost internet premium speed customers with a bundle of goodies, including a Dynamic DNS service.
Does Verizon offer Dynamic DNS service included as well?
If not, which is easiest to use (I have a Mac running OS X 10.5.7)
I noticed that my FiOS Router Firmware has Dynamic DNS section, but it's very unclear as to if it is meant for a Verizon specific service or a third party service.
Please advise; thanks!
--> Screenshot of Verizon Router Firmware screen - click here.
Message Edited by FireFish on 06-02-2009 01:22 AM
Message Edited by FireFish on 06-02-2009 01:22 AM

That screen you captured is where you would enter your dyndns.org account info and thereby get dynamic dns running on your setup.
It's not really accurate to say the service is 'included' in the bundle, it's just that the router is capable of talking with this 3rd party service - most routers can do so nowadays.

Dynamic Cache Service for Windows Server 2008 R2

We have problem with Metafile memory overflow on our server that described on a lot of topics.
I need DynCache for win2008r2 server.
Could you please help us with this issue?

By design. The memory management algorithms in Windows 7 and Windows Server 2008 R2 operating systems were updated to address many file caching problems
found in previous versions of Windows.You do not need to install this additional service.
http://blogs.msdn.com/b/ntdebugging/archive/2009/02/06/microsoft-windows-dynamic-cache-service.aspx
http://blogs.msdn.com/b/ntdebugging/archive/2007/11/27/too-much-cache.aspx
http://www.arabitpro.com

SAP ME 5.2 Web Services Documentation required

Hello Everyone,
With reference to the existing thread on the url SAP ME Webservice Documentation?,can i find the mentioned additional SAP 5.2 Web Services documentation,if so please share the link of the same.
Thanks,
Rajiv Kumar

Rajiv,
This document is delivered within SDK training package for SAP ME.
Regards,
Sergiy

SAP J2EE Engine 6.40 Web Services Documentation & Samples

Where can we find the J2EE Engine 6.40 as well as ABAP Web services documentation as well as the sample applications?
Thanks in advance

Hi Vladimir
Please check the following links
J2ee engine webservices
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f76f9f90-0201-0010-bf84-d0409ea425f1
ABAP webservices
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/244e7923-0a01-0010-5887-fe0b0c6dbb8d
/people/thomas.jung3/blog/2004/11/15/bsp-150-a-developer146s-journal-part-xiii-developing-abap-webservices
/people/durairaj.athavanraja/blog/2004/09/20/consuming-web-service-from-abap
/people/thomas.jung3/blog/2005/05/09/abap-webservices-logon-language-processing
Hope it helps
Regards

GroupWise 8 Web Services Documentation

We are in the process of updating the GroupWise 8 Web Services documentation. Until the GroupWise 8 changes have been merged into the current GroupWise 7 documentation, we thought it would be good to give you the updates for GroupWise 8.
You will find this update at: ftp://ftp.novell.com/outgoing/GW8WS.zip
Files or directories of interest:
GW8 - SOAP Documentation.pdf - Changes from GroupWise 7 to GroupWise 8.
WSDL and schemas\GW8 - GroupWise 8 WSDL and schemas
clients\Java\JAX-WS - Sample client of latest Java technology for Web Services
800\WSDL and schemas\GW8\Differences - GW703 and GW8 - Schema differences between GW7 and GW8
Missing at this time:
- Documentation on WSDL and schemas\GW8\archive.wsdl
Let me know if you have questions, comments, or suggestions.
Tim Draper
GroupWise Development

Here is a response about the availability of the documentation:
The documentation is currently posted here:
http://developer.novell.com/document...a/bktitle.html
We're currently working with Richard Smith to get a link to this page from
Novell Developer Kit page
(http://developer.novell.com/wiki/ind..._Developer_Kit)
Hope that helps.
-Luke
>>> On Tuesday, January 05, 2010 at 4:29 AM, Preston
Stephenson<[email protected]> wrote:
> Sorry, the documentation went to a new writer.
> I'm try to track down the status of the document.
>
>>>> On Monday, January 04, 2010 at 7:26 AM,
> ecmwise<ecmwise@no‑mx.forums.novell.com> wrote:
>
>>>> Documentation on WSDL and schemas\GW8\archive.wsdl
>>
>> Is the documentation for archive.wsdl and archivexsd. now available?
>>
>> Best regards
>> Gregor

Jdeveloper Web Services Documentation

hi , i'm developing web services using jdeveloper 10g , these web services are an application modules web services , i'm writting a full java documentation for the methods in my application modules classes , when i generate the web service , the methods "service" documentation is not included in the generated wsdl file ,
how i can show this documentation in the wsdl file , to make it easier for those whose viewing the web page for that service to see a clead description of the service ????

Hi,
any news on this since last year? Or any other solutions to do it automatically?
It would be essential to have the WSDL documented by automatic generation from javadoc or even from PL/SQL comments when using PL/SQL web services.
At least / besides, a tool/dialog in JDeveloper would be nice which substitutes manually inserting a lot of documentation tags.
Regards,
Patrik

Compatible Dynamic DNS Services

Does anyone know about ANY FREE Dynamic DNS service compatible with the Dynamic Global Hostname settings in Airport Extreme (MC340LL/A A1354)?
My registar/hosting (DreamHost) doesn't allow dynamic dns updates, except through local shell or perl scripts, or APIs on the web server — as far as I know. Dyndns.com only allows it with Custom DNS Zones, which are not free. And I would rather not use those silly update clients.
Oh, and I'm not willing to pay $99/yr for a MobileMe account just to have my home.owndomain.com pointed to my dynamic IP. Ain't gonna happen!
Thanks in advance!

Hi, Tesserax. Thanks for the welcome!
I've been using DynDNS with a D-Link router, but it got replaced.
Their words:

Which means it CAN be done, but only with Custom DNS. First, I think $29.95 for just a pointer is a little expensive; second, I would have to move my DNS services from my hosting. Too much ado, so I'm looking for an alternative — without success so far. I just want something that uses DNS Update protocol and TSIG security.
Meanwhile, I set up an API from my hosting and a perl script running on the boot to check if DNS is pointing to the right IP. It just works, clean and simple. But it's not a built-in solution and I cannot take advantage of wide area Bonjour, for example.
So, if does anyone know about it — a free dynamic dns service that uses DNS Update protocol and TSIG security —, please let me know.
Thanks,
Gui

How do I build a dynamic business service URL in OSB 11g?

Hello,
I am used to using the business service endpoint URIs that we configure on the Transport tab of our business services in OSB 11.1.1.6. We can add multiple static entries here for load balancing, and we can overwrite these with a Customization File as we migrate through DEV, TEST, PROD. Everything's just fine there.
I now need to start consuming RESTful services with dynamic URLs such as:
http://host:port/customer/{customerId}
that would result in HTTP calls to values like:
http://host:port/customer/12345678
and
http://host:port/customer/55555555
I see that I can build the URI using the Routing Options action in our proxy message flow and throw in all of those variable values at runtime. This is working in DEV just fine. And, effectively, I've overridden the business service endpoint URIs that we configured in the Transport.
But now I want to:
1) Use multiple endpoint URIs for our cluster
2) Deploy to TEST
What is the proper way to do this? I would guess in the business service endpoint URIs in the customization file, but I don't know how to parameterize those. I would also guess customization file find/replace functionality to change the host:port in my Routing Options action, but then that would still be just a single-node endpoint and not a pointer to multiple servers in our cluster.
Can someone please advise the best way to configure these dynamic URLs at runtime while still allowing for clustered endpoints and for customization files to be applied as we promote through our environments?
Thank you,
Michael

Found some old code.
I think you need to do
property_text = "#"^variable_text
then you can do the following
property_list[1][property_text]
That seemed to work.

SRM7 - eSOA service documentation

Hi all gurus,
we're using SRM7 on our testing system and we enabled distribution of contracts to the backend test system using the new eSOA technology. I'm completely new to this kind of procedure; we've seen that the contract distributed are definitely wrong on the backend (e.g. service hierarchies are flattened, service lines have been "locked", and so on) and looking on the SRM system in sxi_monitor tx I can easily check that the XML itself is not correct.
Here are the questions:
- where can I get detailed documentation about this new service, from beginning to the end (SRM creation of XML -> XML sending -> backend receiving -> BAPI ? (I suppose) to create the document) of the process?
- specifically, what's the part of code (FM, methods) in which is defined how to convert the SRM document into an XML file? This should be the point in out task, since it seems that contracts are badly converted into the XML message...
Thanks everyone for the hints and suggestions you might give
EDIT: the problem seems to be related to contracts with service hierarchy... is there feature not supported by standard actually by now? Is there any workaround available? Thanks again
Edited by: Matteo Montalto on Dec 10, 2009 3:09 PM

Hi Matteo,
Did u get any documents for ur problem (Creation of XML messages in SRM). I would be greatful if u could share those with me.
Even I am looking for the same as we wish to configure service procurement using ESOA.
Pl let me know if u have the documents for ESOA.
Cheers,
Nikhil

MDM 5.5 SP04 Java API and Web Service Documentation

Is there documentation available that reflects the SP04 changes to the Java API, and the web services that are now available?
As of this morning, service marketplace contained spotty SP04 docs.
Thanks in advance,
Mike

Mike,
A cookbook would be wonderful (I think our developers would throw a party)!
An updated object model (as a preface to the user guide) for the legacy API (MDM4J.jar) AND the new "rebranded" API (mdm-*.jar) would also work.
I've been reduced to comparing the SP3 & SP4 javadocs
One fun approach that appears to be working for us, is to model each process using the DataManager, and try to duplicate that exactly via the corresponding API objects (e.g. the simple Connect-Find Table-Search Table-View Result Set-View Record-CheckOut/Upsert/Validate/CheckIn dance). New features in the DataManager reveal themselves a little more readily
Good luck,
...Dee

Dynamic monitorin service documentation

Similar Messages

Maybe you are looking for