Dynamic parameter against table TVTWT

I currently have the table TVTWT linked in order to get the name description for the distribution channel.
For example, distribution channel 00 has two rows, one german and one english.
In my dynamic parameter for distribution channel, when I try to show the name description of the distribution channel in the drop down, I get only the german name description instead of the english description. When I look at the connection for the datasource, the language is set to EN. Is there anyway I can get around this issue?
thanks for any assistance.
Richard

Please re-post if this is still an issue to the Data Connectivity - Crystal Reports Forum or purchase a case and have a dedicated support engineer work with you directly

Similar Messages

Dynamic parameter with unlinked table

Post Author: martinh
CA Forum: Data Connectivity and SQL
Hello,
I have 2 tables in my database. One table (table A) is for selecting the data (all kind of fields)
The other table (table B) is only to be used to have a parameter selection (table with name, value records). These tables have no link with eachother.
I need to have 8 parameter fields and each parameter field must pick a value from table B.
In my recordselection (on table A) I have tests to select records depending on parameters.
I have this working using 8 static parameters, but I have a list of 16 values.
So that means that for each of the 8 parameters I must enter those 16 values (and also in formula-fields I have make tests; total 8x16 lines of coding)
Therefore I wanted to use a table with the 16 values and link the 8 parameters to table B.
The problem is that CR says that there are 2 startpoints and also I see that the data is selected several times.
So how can I use table B only for the parameters without the need of linking this table B to table A, because there is no way to link this.
Hope anyone can help, because I didn't fond any documentation talking about this situation.
I'm using CR XI and CR 2008
Thanks for your reply!
Martin

The dynamic parameter does not have the functionality to 'type-ahead' and go to specific values in the list in that manner. The most you can do is go to values that start with a specific letter and scroll through them. This behavior is occurring by design.
By default, Crystal Reports will only return the first 1000 unique values for a dynamic parameter. This can be changed through a registry entry.
For information on changing the values retrieved for the dynamic parameter, you can refer to the following Business Objects Note.
- Go to this link
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_ossnotes&query=&adv=true
- Search for the Note: 1218588
When using a dynamic parameter, the limit will be a combination of all the values return at each level to reach the total number of records returned. Also the more records that you return to the dynamic parameter, the longer it will take to retrieve the data from the database.

Dynamic SQL : passing table name as parameter

Hi
I have a SQL query (a store procedure ) that i want to convert to PLSQL
This is a part of my SQL query that i am trying to to find a solution for it, because i cant convert it to oracle :
DECLARE lookupTableRow CURSOR FOR
SELECT TableName FROM SYS_LookUpTable
OPEN lookupTableRow
FETCH NEXT FROM lookupTableRow INTO @tableName
WHILE @@FETCH_STATUS=0
BEGIN
SET @sql='SELECT * FROM '+@tableName
EXECUTE sp_executesql @sql
IF @counter=0
BEGIN
INSERT INTO T_TABLE_MAPPING VALUES('P_MAIN_METADATA', 'Table', @tableName)
END
ELSE
BEGIN
INSERT INTO T_TABLE_MAPPING VALUES('P_MAIN_METADATA', 'Table'+CONVERT(NVARCHAR(10),@counter), @tableName)
END
SET @counter=@counter+1
FETCH NEXT FROM lookupTableRow INTO @tableName
END
CLOSE lookupTableRow
DEALLOCATE lookupTableRow
As i understand i can't use ORACLE dynamic sql (execute immediate) when the table name is a parameter
Furthermore when i execute this dynamic query in my SQL store procedure each SELECT statement return me as a result the relevant table rows , those result are different in each loop .
So i cant do this too with ORACLE dynamic sql .
Please advice for any solution
* how can i use dynamic sql with table name as parameter ?
* how can i use a "dynamic" cursor, in order to be able to display the dynamic results ?
Thanks for the advice

Hi,
b003cf5e-e55d-4ff1-bdd2-f088a662d9f7 wrote:
Hi
I have a SQL query (a store procedure ) that i want to convert to PLSQL
This is a part of my SQL query that i am trying to to find a solution for it, because i cant convert it to oracle :
DECLARE lookupTableRow CURSOR FOR
SELECT TableName FROM SYS_LookUpTable
OPEN lookupTableRow
FETCH NEXT FROM lookupTableRow INTO @tableName
WHILE @@FETCH_STATUS=0
BEGIN
SET @sql='SELECT * FROM '+@tableName
EXECUTE sp_executesql @sql
IF @counter=0
BEGIN
INSERT INTO T_TABLE_MAPPING VALUES('P_MAIN_METADATA', 'Table', @tableName)
END
ELSE
BEGIN
INSERT INTO T_TABLE_MAPPING VALUES('P_MAIN_METADATA', 'Table'+CONVERT(NVARCHAR(10),@counter), @tableName)
END
SET @counter=@counter+1
FETCH NEXT FROM lookupTableRow INTO @tableName
END
CLOSE lookupTableRow
DEALLOCATE lookupTableRow
As i understand i can't use ORACLE dynamic sql (execute immediate) when the table name is a parameter
Furthermore when i execute this dynamic query in my SQL store procedure each SELECT statement return me as a result the relevant table rows , those result are different in each loop .
So i cant do this too with ORACLE dynamic sql .
Please advice for any solution
* how can i use dynamic sql with table name as parameter ?
* how can i use a "dynamic" cursor, in order to be able to display the dynamic results ?
Thanks for the advice
I have a SQL query (a store procedure ) that i want to convert to PLSQL
I doesn't help when you use one term to mean another thing.
SQL is a language used in both Oracle and other products, such as Microsoft's SQL Server. I don't know much about SQL Server, but Oracle (at least) doesn't support stored procedures in SQL itself; they have to be coded in some other language, such as PL/SQL.
As i understand i can't use ORACLE dynamic sql (execute immediate) when the table name is a parameter
If the table name is a parameter (or only known at run-time for any reason), that's exactly the kind of situation where you MUST use dynamic SQL.
The number of columns that a query produces (and their datatypes) is fixed when you compile a query, whether that query is dynamic or not. If you have multiple queries, that produce result sets with different numbers of columns, then you can't combine them into a single query. The best you can do with one query is to add NULL columns to some of the queries so they all produce the same number of columns.
If you're just displaying the results, there might not be any reason to combine separate result sets. Just display one result set after another.
Whenever you have a question, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all the tables involved, and the results you want from that data.
Explain, using specific examples, how you get those results from that data.
Always say what version of Oracle you're using (e.g. 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002

CR2011 Dynamic Parameter does not show list at all

I am upgrading some Crystal Reports from CR 8.5 to 2011. Some would be better served by using a dynamic parameter to allow the user to select the data for the parameter from the database information. I have created a dynamic parameter on the Customer ID and set the description to be the customer name. I have set it to handle multiple values.
When I preview the report in the Crystal designer, I get a text box to type in but not a drop down. To be clear, I am not talking about the LOV 1000 limit here. There are only 50 customers in the sample file I am working with. I tried turning the static parameter into a dynamic one, I deleted the original parameter and created a new one.
In case it matters, the parameter is only used as part of the selection formula and if I enter a proper customer id, it will retrieve the data. This report has about 7 tables (no stored procedures or views) and a subreport of two tables that is linked to the main report on the customer id. The parameter is only used on the main report for record selection. The SQL statement in the main report and subreport did need to be reset when I first opened the report in CR2011 but I did that on both. I have verified the database and the option to verify on first refresh is checked. The original parameter did have an imported list of about 3000 customer names. I tried exporting the CR template to a new file and while the file size changed, the behaviour did not.
When I create a brand new report on two of the tables, including the same customer table, and create the parameter the same way, it shows me the list properly in a dropdown at the prompt stage.
I am not sure where to go here or what else to try. If anyone has any suggestions, I appreciate the help. TIA, rasinc

Thank for the reply Dell,
I see the logic in adding the extra table and keeping it unlinked and I do know the crazy data that can come up if I use it linked to other tables or use the fields in other parts of the programming.
However, I've now tried it several times, creating the parameter on just the name alone, with the ID alone, etc. and I still only get a text box to type into.
I have made sure the original selection criteria
{customer.Id} = {?Customer}
if from the original table, not the new one, which I assume you expected me to do.
So I decided to run the same report through CR XIR2. When I update the Set Datasource Location, I am now getting the message
"Invalid Argument provided.
Details: The alias requested 'company', contains a combination of characters which is not considered to be valid"
Company is a table containing information about the main company, not the customers. The same message pops up for another table as well.
Then I get a message that says:
"Prompting failed with the following error message: 'List of Values failure: fail to get values. [Cause of error: The table company does not exist in the document.]'
Error source: prompt.dll Error code: 0x8004380D"
This appears to be a database access issue but I know the firewalls are not a problem because I can create a new report and get the LOV properly with the same database and same desktop computer. I can take that report created in CR2011 and use it in CRXI also and get the proper LOV. Is it possible I am dealing with template corruption because there were so many items imported into the static list before?

Why Dynamic Parameter is not working, when i create report using stored procedure ?

Post Author: Shashi Kant
CA Forum: General
Hi all
Why Dynamic Parameter is not working, when i create report XI using stored procedure ?
Only i shaw those parameters which i used in my stored procedure, the parameter which i create dynamic using stored procedure
is not shown to me when i referesh the report for viewing the results.
I have used the same procedure which i mention below but can not seen the last screen which is shown in this .
============================================================================================
1. Select View > Field Explorer2. Right-click on Parameter Fields and select New from the right-click menu.3. Enter u201CCustomer Nameu201D as the name for your parameter4. Under u201CList of Valuesu201D select u201CDynamicu201D5. Under the Value column, click where is says u201Cclick here to add itemu201D and select Customer Name from the drop-down list. The dialog shown now look like the one shown below in Figure 1. Click OK to return to your report design.
Dynamic Parameter Setup6. Next, select Report > Select Expert, select the Customer Name field and click OK.7. Using the drop-down list beside select u201CIs Equal Tou201D and using the drop-down list, select your parameter field (it should be the first field). 8. Click OK to return to your report design and see the parameter dialog.The parameter dialog will appear and show you a dynamic list of values that is updated each time your run your report. It couldnu2019t be easier! In our next tutorial, we will be looking at how to use this feature to create cascading parameter fields, where the values are filtered by the preceding selection.
Dynamic Parameters in Action
My question is that whether dynamic parameter is working with storedprocedure or not.
When i added one table and try to fetch records using dyanmic prameters. after that i am not be able to find the dynamic parameter option when i referesh my report.
One more thing when i try the static parameter for my report, the option i see when i referesh the screen.
Please reply soon , it's urgent
Regards
shashi kant

Hi Kishore,
I have tested the issue step by step by following you description, while the first issue works well in my local environment. Based on my research, this can be caused by the lookup expression or it indeed return Male value based on the logic. If you use the
expression below, it will indeed only return the Male record. So please try to double-check the record in the two datasets and the expression in your environment:
=lookup(first(Fields!ProgramID.Value,"DataSet1"),Fields!ProgramID.Value,Fields!Gender.Value,"DataSet2")
As to the second issue, please try to use the following expression:
=Count(Lookup(fields!ProgramID.value,fields!ProgramID.value,fields!Gender.value,"DataSet2"))
Besides, if this issue still exist, in order to trouble shoot this issue more efficiently, could you please post both the .rdl file with all the size properties to us by the following E-mail address? It is benefit for us to do further analysis.
E-mail: [email protected]
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Can I modify the data type of a dynamic parameter?

I am using CR2008 against an Oracle 11 db and have a report with dynamic parameters.
One of the report sources is a custom view that selects all of the possible 'pay ending dates' where one of the fields from this view is used as the source for the dynamic parameter.
The view performs a TRUNC on the date field in an effort to eliminate the TIME component.
The problem is that the parameter definintion defaults to DATE/TIME (vs. just DATE). I'm wondering if there is any way to modify the data type of the parameter to be DATE only.
I've searched several forumns but have not found anything.
One solution I can think of is to have the custom view format the date field as a VARCHAR (sans the time component) which I assume would force the dynamic parameter data type to string, and then have the report perform a todate function on the value when applying the criteria.
Anyone else have an idea? Just seems like CR should allow the developer to specify the data type- especially b/w Date and Date/Time, rather than make an assumption.
Thank you in advance-
emaher

emaher,
Here's what you can do:
Leave the existing date column as it is in the view...
Just add another column to the view that casts the the date as a VarChar data type and formats the date as you would like it to be.
So now you'll have 2 date columns in the view... 1 that's still a date and another that a character string.
Now for your parameter, use the date version as the parameter value and the text version as the parameter description.
Be sure to set the "Prompt with description only" is set to true.
This way the user sees the LoV in the desired format but there's not need to wrangle it back into a date for data selection.
HTH,
Jason

How to dynamically update the Table?

Hi All,
Hope somebody will help me out ot resolve my issue.
In my application, about 10 analog channels data coming in. Out of which two parameter needs to get updated dynamically on the table. (For each Rpm between 500-1000, in steps of 50, have to capture Pressure points & show it on the table.)
I seen there is one method called table method available which helps to set the value of a particular cell specified by corresponding row and column index.
I tried this. In row 0, col 0 & col 1 it put what value I specified by using that table method. when it goes to row 1, col 0 & col 1 also got updated but vanishing the above put row 0, col 0 & col 1 values. so at any point of time, I am able to see only the current row values.
Hope there should be some dynamic refreshing method available or else I dont know how to handle this situation. Pls. clarify.
Thanks,
Kousy

Hi,
Thanks.
But I am not able to update dynamically.
I just done slight changes to your update.vi. Just run Update_1.vi and after update
button is pressed, change the row, col index to see the update. please note
it is not able to update if matrix exceeds 3x4. i.e set row index=3
col index=0; new cell value = 10. it is not updating.. it might because of initialization
of 3x4 matrix values at the start.. ot the way I am trying out is bad?
By using Table method itself I got the solution what I want. I have attached that vi too.
just check out and reply if any flaw..
Thanks,
Kousy
Attachments:
update_1.vi ‏94 KB
Table Update.vi ‏96 KB

Crystal Report Dynamic Parameter for SAP B1 version 8.8

Hi, does anyone have problem with the dynamic parameter prompt for Crystal Report in SAP B1 version 8.8?
For example:
1. For static parameter that allows multiple value --> In SAP B1 v8.8, there is a check-box and a "..." button next to it. When you click the "..." button, a new window appear with a list of values to choose.
2. For static parameter that does not allow multiple value --> In SAP B1 v8.8, there is one field with a drop-down menu.
3. For dynamic parameter that allows multiple value and does not allow range values --> In SAP B1 v8.8, just one field for us to key in the value. Shouldn't this be the same as No. 1?
4. For dynamic parameter that does not allow multiple value and does not allow range values --> In SAP B1 v8.8, same as No.3 above. Shouldn't this be the same as No. 2?
How do I get no. 3 dynamic parameter that allows multiple value and does not allow range values to have a check-box and a "..." button next to it to allow us to select multiple values?

Hi Shwu Hua Gan,
Thank you for your reply.
Please forgive me as I don't really understand what you are saying here. To be honest, I'm very new to Crystal Report and my understanding of CR is just the very basics. I'm actually not from a technical background which makes it more difficult.
In your reply:
Ie, you create a parameter in Crystal report, and by using the token eg:Mytest@select * from OCRD, it gives you the benefits of selecting the list from the database.
How do you do this by using the token? All I did is just select the parameter type (dynamic) and then select the table. When I preview the report in SAP B1 8.8, it doesn't prompt me like how I expect it to be. It is a blank field that I have to key in the value myself and then only the report will generate. Sometimes I don't remember what value to key in, so I have to do a formatted search for the blank field. After the report is generated, I can reselect the value (multiple values) from the CR viewer panel toolbar and refresh the report.

Setting default value in dynamic parameter

Post Author: gazala
CA Forum: General
I have a dynamic parameter which is also displaying All static value as first item in th list.I want to make ALL as default in the parameter but its giving problem.Problem is when i set ALL as default it doesn't display dyanamic values!

Post Author: synapsevampire
CA Forum: General
A common solution is to use a Union All in a query to get the ...All and the dynamic values using a Command Object.
select '...All' from tableUNION ALLselect field from table
-k

Dynamic Parameter - Login Prompt

I created a command which has a paramenter in it. Crystal Reports automatically created the paramenter in the report. My problem is that when I run the report in infoview I am prompted for the database username and password. I have already set the datasources in my crystal report as well as in the cms setup the database and selected use the database connection and do not prompt.
I have narrowed the problem down to the dynamic parameter. I am not prompted for the username and password when I remove the parameter.
I am not sure if the problem is with my command given the fact that I am doing a select statement from two different databases or what. or
I changed the static parameter to a dyanmic parameter so that I could let me users select using a description rather then just a number.
I'm using crystal reports 11.0.0.1282
Richard

I don't know. I have tried to do it a few ways. Here is my query:
SELECT     EmpName, ClockNbr, DeptNbr, DeptName
FROM         SecurityLevels.dbo.ActiveEmployees AS TB1
WHERE     (ActFlag = '1') AND (NOT EXISTS
                          (SELECT     transID, employeeID, agreementID, agreeDate, fullname, DepID, ContractEmp, Login
                            FROM          iagree AS TB2
                            WHERE      (TB1.ClockNbr = employeeID) AND (agreementID ={?@Document})))
I'm grabbing a list of employees and then checking to see who is not in another table. I could figure out how to make this work in crystal by just adding the two tables to the report.

IMPORT from database with dynamic parameter list

Hi Gurus,
Iu2019m having problems during import from a cluster table.
I wanu2019t to do an import with a dynamic parameter list, but I cannot get it to work.
Sample code ********
DATA: BEGIN OF st_key,
report LIKE rsvar-report,
variant LIKE rsvar-variant,
END OF st_key.
DATA dirtab1 LIKE cdir OCCURS 10 WITH HEADER LINE.
DATA dirtab2 LIKE cdir OCCURS 10 WITH HEADER LINE.
st_key-report = 'ZPRG'.
st_key-variant = 'VAR1'.
IMPORT DIRECTORY INTO dirtab1 FROM DATABASE vari(vb) ID st_key.
IMPORT DIRECTORY INTO dirtab2 FROM DATABASE vari(va) ID st_key.
DATA: tmp_var(100) TYPE c.
This works - P_BWTAR is a parameter from the selection screen registred in VARI
I'm getting the content of the field in tmp_var
IMPORT p_bwtar TO tmp_var FROM DATABASE vari(va) ID st_key.
This does not work - the parameter P_BWTAR is in the dirtab2-name
I'm not getting the content
LOOP AT dirtab2.
IMPORT dirtab2-name FROM DATABASE vari(va) ID st_key.
ENDIF.
ENDLOOP.
I have tried the syntax IMPORT (dirtab2-name) ........
but this fails the syntax check.
Please - if you have any suggestions :o)
Best Regards,
Vibeke

Dear Vibeke,
Could you please explain us how you solved the problem because you have the same issue ?
thanks a lot
KR
véronique

Dynamic Parameter Requiring Database Login

Hey All, Thanks in advance for any assistance.I created a report in Crystal Reports XI R2 in which I embedded 2 command objects, both of which connect to the same DB. Command_0 performs the SQL to bring back the information which is needed in the report. Command_1 pulls back two fields from a table which are used to fill a dynamic parameter used in command_0. I saved the report to the Crystal Repository which will host the report for our end users. I used the BusinessObjects Enterprise Central Management Console (CMC) to set up default DB connection information for the report so that the end users do not need to have the SQL server authentication information. To make sure everything worked as it had when I was designing the report I logged on to our Crystal Server as if I were and end user and tried to access the report. The report will run exactly as expected if I leave the default information in the dynamic parameter. However when I try to change my dynamic parameter the report prompts me for the SQL server authentication information. It appears as if the default DB connection information I set up using the CMC does not apply to command_1. I need to find a way to get this prompt to stop, I cannot release the SQL authentication information to all of our end users that would be a security nightmare.Again Thanks for any assistance or advice you can offer.Gary 

When you create a dynamic parameter, Business Objects Enterprise Creates few objects for you that essentially creates you a List Of Values (LOV) object for that parameter.Â LOVs can be created and configured manuallyÂ from the Business View Manager.Â You have toÂ specifyÂ the database login informationÂ in the Data Connection objectÂ that your LOV uses.
Hope that helps.

Calling a report that have dynamic parameter from vba

i have this report that have a dynamic parameter , when i call from my application using vba it aske for server name , user id and password , even i have provided the connection string right , so if there is diffrent way to do it can you tell me , because this is killing me from over a month
i have attached the a screen shot and the code is following
thanks
Dim cn As ADODB.Connection
Dim rst As ADODB.Recordset
Dim userinfo As New RetrieveGlobals9.retrieveuserinfo
Dim strsql, sqlDataSource, pwd, userId1, constring, interCompanyID As String
Dim path, userf, userto As String
Public application As New CRAXDRT.application
Public report As New CRAXDRT.report
Private Sub CUPRPayrollReports_Initialize()
    sqlDataSource = userinfo.sql_datasourcename
    userId1 = userinfo.retrieve_user
    pwd = "sql"
    interCompanyID = "ASCTR"
End Sub
Private Sub DepartmentWisePrint_Changed()
CUPRPayrollReports_Initialize
path = "C:\Program Files\Microsoft Dynamics\GP\departmentWise.rpt"
Set cn = New ADODB.Connection
constring = "Provider=MSDASQL" & _
             ";Data Source=" & sqlDataSource & _
             ";User ID=" & userId1 & _
             ";Password=" & pwd & _
             ";Initial Catalog=" & interCompanyID
With cn
      .ConnectionString = constring
      .CursorLocation = adUseNone
      .Open
   End With
Set rst = New ADODB.Recordset
strsql = "SELECT * FROM DepWise"
rst.Open strsql, cn, adOpenDynamic, adLockOptimistic, adCmdText
Set report = application.OpenReport(path, 0)
report.Database.SetDataSource rst, 3, 1
report.EnableParameterPrompting = True
ReportViewer.CrystalActiveXReportViewer1.ReportSource = report
ReportViewer.Top = 0
ReportViewer.Left = 0
ReportViewer.Height = 500
ReportViewer.Width = 760
ReportViewer.ScrollBars = fmScrollBarsBoth
ReportViewer.CrystalActiveXReportViewer1.Top = 0
ReportViewer.CrystalActiveXReportViewer1.Left = 0
ReportViewer.CrystalActiveXReportViewer1.Height = 500
ReportViewer.CrystalActiveXReportViewer1.Width = 750
ReportViewer.CrystalActiveXReportViewer1.EnableGroupTree = False
ReportViewer.CrystalActiveXReportViewer1.EnableRefreshButton = True
ReportViewer.CrystalActiveXReportViewer1.EnableExportButton = True
ReportViewer.CrystalActiveXReportViewer1.EnablePrintButton = True
ReportViewer.CrystalActiveXReportViewer1.ViewReport
'If ReportViewer.Visible = False Then ReportViewer.Show
'If ReportViewer.Visible = False Then
ReportViewer.Show
Set rst = Nothing
Set cn = Nothing
End Sub

How many tables is there in the report? And, do you have any subreports? I'd recommend gaining experience with this by creating as simple a report as possible - one table - one field, create a recordset, pass that to this report. Does it work? It should. Now we have a bit of confidence and experience, so increase the complexity. But let me know answers to the two Qs above.
Ludek

To populate dynamically created int table with data from other table

Hi everybody,
I have already created an internal table dynamically, but now want to populate it with data from another IT depending on the plant name.
My dynamic int table contains fields with plant name like '8001' ,'8002' and so on.
no I want to read data from the other table and depending on bwkey which contains similar data like plant name , want to append to this new dynamic int table through read key statement.
I cannot reference the field name hard coded as it does not allow field symbol reference to be hard coded.
Pls help.

Hi,
Check the code below:
REPORT ztestdyn.
TYPE-POOLS : slis.
TABLES: yyle0003.
DATA:
g_exit TYPE c,
g_save VALUE 'A', "For parameter I_SAVE
g_repid LIKE sy-repid, "For program name
g_variant TYPE disvariant. "For parameter IS_VARIANT
*Tables
DATA: d_ref TYPE REF TO data,
 d_ref1 TYPE REF TO data,
 i_alv_cat1 TYPE TABLE OF lvc_s_fcat,
 ls_alv_cat1 LIKE LINE OF i_alv_cat1.
DATA: BEGIN OF total_tab OCCURS 0 ,
 tknum TYPE yyle0003-tknum,
 quantity TYPE p, "yyle0003-QUANTITY,
 END OF total_tab.
DATA: BEGIN OF g_scandata_tab OCCURS 0.
 INCLUDE STRUCTURE yyle0003.
DATA: END OF g_scandata_tab.
DATA: g_yyle0003_tab LIKE yyle0003 OCCURS 0 WITH HEADER LINE.
DATA: g_itab1 TYPE TABLE OF yyle0003.
DATA: wa_itab1 LIKE g_scandata_tab.
TYPES: BEGIN OF itab2,
 tknum TYPE yyle0003-tknum,
 vhilm TYPE yyle0003-vhilm,
 quantity TYPE p,
 END OF itab2.
DATA: g_itab3 TYPE TABLE OF itab2.
DATA: wa_itab3 TYPE itab2.
DATA: g_itab5 TYPE TABLE OF itab2.
DATA: wa_itab5 TYPE itab2.
DATA: g_itab4 TYPE TABLE OF itab2.
DATA: wa_itab4 TYPE itab2.
DATA: gv_wa TYPE REF TO data.
DATA : wa_tab TYPE itab2.
DATA: BEGIN OF itab6 OCCURS 0,
 vhilm TYPE yyle0003-vhilm,
 quantity TYPE p,
 END OF itab6.
******************Start of Internal Table Definition *******************
DATA:
 g_custom_container_0100 TYPE REF TO cl_gui_custom_container,
 g_alv_grid_0100 TYPE REF TO cl_gui_alv_grid,
 g_container_0100 TYPE scrfname VALUE 'LIST',
 g_mylayout TYPE lvc_s_layo,
 ok_code LIKE sy-ucomm.
FIELD-SYMBOLS :<f_fs> TYPE table,
 <f_fs11> TYPE table,
 <f_fs1> TYPE table,
 <f_fs3> TYPE ANY,
 <f_fs4> TYPE ANY,
 <f_field> TYPE ANY,
 <f_fs5> TYPE ANY.
FIELD-SYMBOLS: <fs_wa> TYPE ANY.
DATA: l_var TYPE i,
 l_i TYPE i.
DATA: l_var1 TYPE char20,
 l_var2 TYPE char20.
DATA: l_TOTAL TYPE I,
 L_FILL TYPE i,
 L_TOT TYPE I.
DATA: l_int TYPE i,
 l_sum TYPE i.
FIELD-SYMBOLS: <f_fs2> TYPE itab2, "
 <f_fs6> TYPE ANY,
 <f_fs7> TYPE ANY.
DATA: l_var3 TYPE char15.
DATA: l_quant TYPE p.
FIELD-SYMBOLS: <f_fs8> LIKE itab6, "
 <f_fs9> TYPE ANY,
 <f_fs10> TYPE ANY.
FIELD-SYMBOLS : <f_fs12> TYPE ANY,
 <f_fs13> TYPE ANY.
SORT g_scandata_tab BY tknum vhilm.
LOOP AT g_scandata_tab INTO wa_itab1.
 MOVE-CORRESPONDING wa_itab1 TO wa_itab3.
 APPEND wa_itab3 TO g_itab3.
ENDLOOP.
LOOP AT g_itab3 INTO wa_itab3.
 COLLECT wa_itab3 INTO g_itab4.
ENDLOOP.
LOOP AT g_itab4 INTO wa_itab4.
 MOVE-CORRESPONDING wa_itab4 TO wa_itab5.
 MOVE-CORRESPONDING wa_itab4 TO itab6.
 APPEND wa_itab5 TO g_itab5.
 COLLECT itab6.
ENDLOOP.
CLEAR wa_itab3.
SORT g_itab4 BY tknum vhilm.
DELETE ADJACENT DUPLICATES FROM g_itab4 COMPARING vhilm.
DESCRIBE TABLE g_itab4 LINES l_var.
l_i = '2'.
ls_alv_cat1-fieldname = 'TKNUM'.
ls_alv_cat1-col_pos = 1.
ls_alv_cat1-coltext ='ShipmentNo.'.
APPEND ls_alv_cat1 TO i_alv_cat1.
DATA: l_var4(10) TYPE c,
 l_var5(10) TYPE c,
 l_fieldname(20) TYPE c..
LOOP AT g_itab4 INTO wa_itab4.
 IF l_var >= 1.
 CONDENSE wa_itab4-vhilm NO-GAPS.
 ls_alv_cat1-fieldname = wa_itab4-vhilm. "l_fieldname.
 ls_alv_cat1-col_pos = l_i.
 ls_alv_cat1-coltext = wa_itab4-vhilm.
 ls_alv_cat1-do_sum ='X'.
 APPEND ls_alv_cat1 TO i_alv_cat1.
 CLEAR : ls_alv_cat1, l_fieldname.
 l_i = l_i + 1.
 ENDIF.
 AT LAST.
 ls_alv_cat1-fieldname = 'TOTAL'. "l_fieldname.
 ls_alv_cat1-col_pos = l_i.
 ls_alv_cat1-coltext = 'TOTAL'.
 ls_alv_cat1-do_sum ='X'.
 APPEND ls_alv_cat1 TO i_alv_cat1.
 CLEAR : ls_alv_cat1, l_fieldname.
 ENDAT.
 SORT i_alv_cat1 BY fieldname.
 DELETE ADJACENT DUPLICATES FROM i_alv_cat1.
ENDLOOP.
SORT i_alv_cat1 BY col_pos.
CALL METHOD cl_alv_table_create=>create_dynamic_table
 EXPORTING
 it_fieldcatalog = i_alv_cat1
 IMPORTING
 ep_table = d_ref.
ASSIGN d_ref->* TO <f_fs>.
CREATE DATA gv_wa LIKE LINE OF <f_fs>.
ASSIGN gv_wa->* TO <fs_wa>.
DELETE ADJACENT DUPLICATES FROM <f_fs> COMPARING ALL FIELDS.
 LOOP AT itab6.
 CLEAR wa_itab5.
 wa_itab5-tknum = 'Total'.
 MOVE-CORRESPONDING itab6 TO wa_itab5.
 APPEND wa_itab5 TO g_itab5.
 CLEAR wa_itab5.
ENDLOOP.
 DESCRIBE TABLE g_itab5 LINES L_TOT.
 LOOP AT TOTAL_TAB.
 L_TOTAL = L_TOTAL + total_tab-quantity.
 ENDLOOP.
LOOP AT g_final ASSIGNING <f_fs2>.
 ASSIGN COMPONENT 'TKNUM' OF STRUCTURE <f_fs2> TO <f_fs6>.
 ASSIGN COMPONENT 'TKNUM' OF STRUCTURE <fs_wa> TO <f_fs7>.
 <f_fs7> = <f_fs6>.
 CONDENSE <f_fs2>-vhilm NO-GAPS.
 ASSIGN COMPONENT 'VHILM' OF STRUCTURE <f_fs2> TO <f_fs3>.
 ASSIGN COMPONENT 3 OF STRUCTURE <f_fs2> TO <f_fs4>.
 MOVE <f_fs3> TO l_var1.
 ASSIGN COMPONENT l_var1 OF STRUCTURE <fs_wa> TO <f_fs5>.
 <f_fs5> = <f_fs4>.
 CLEAR total_tab-quantity.
 READ TABLE total_tab WITH KEY tknum = <f_fs6>.
 IF sy-subrc = 0.
 ASSIGN total_tab-quantity TO <f_fs12>.
 ASSIGN COMPONENT 'TOTAL' OF STRUCTURE <fs_wa> TO <f_fs13>.
 <f_fs13> = <f_fs12>.
 ENDIF.
 L_FILL = L_FILL + 1.
 IF L_FILL = L_TOT.
 ASSIGN L_TOTAL TO <f_fs12>.
 ASSIGN COMPONENT 'TOTAL' OF STRUCTURE <fs_wa> TO <f_fs13>.
 <f_fs13> = <f_fs12>.
 ENDIF.
 AT END OF <f_fs2>-tknum.
 APPEND <fs_wa> TO <f_fs>.
 CLEAR <fs_wa>.
 ENDAT.
ENDLOOP.
CLEAR: <f_fs6>,
 <f_fs7>.
CLEAR <fs_wa>.
CALL SCREEN 0100.
*& Module STATUS_0100 OUTPUT
 text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'ZVKS'.
SET TITLEBAR 'ZVKS'.
CHECK sy-ucomm IS INITIAL.
SORT g_scandata_tab BY tknum vhilm.
CREATE OBJECT g_custom_container_0100
 EXPORTING container_name = g_container_0100
 EXCEPTIONS
 cntl_error = 1
 cntl_system_error = 2
 create_error = 3
 lifetime_error = 4
 lifetime_dynpro_dynpro_link = 5.
CREATE OBJECT g_alv_grid_0100
 EXPORTING i_parent = g_custom_container_0100.
g_mylayout-grid_title = 'Display Scanning data'.
CALL METHOD g_alv_grid_0100->set_table_for_first_display
 CHANGING
 it_outtab = <f_fs>
 it_fieldcatalog = i_alv_cat1
 EXCEPTIONS
 invalid_parameter_combination = 1
 program_error = 2
 too_many_lines = 3
 OTHERS = 4.
IF sy-subrc <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
Regards
Kannaiah

Appending column to an dynamically created internal table

Hi folks,
i have an dynamically created internal table <dyn_tab> which is based on a parameter p_table ( containing the table name ). now i want to add one more column to this <dyn_tab> table where i can store further information in. how can i do that ?
i appreciate your help!

Hi,
Please check this sample program.
type-pools : abap.
field-symbols: <dyn_table> type standard table,
 <dyn_wa>,
 <dyn_field>.
data: dy_table type ref to data,
 dy_line type ref to data,
 xfc type lvc_s_fcat,
 ifc type lvc_t_fcat.
selection-screen begin of block b1 with frame.
parameters: p_table(30) type c default 'T001'.
selection-screen end of block b1.
start-of-selection.
perform get_structure.
perform create_dynamic_itab.
form get_structure.
data : idetails type abap_compdescr_tab,
 xdetails type abap_compdescr.
data : ref_table_des type ref to cl_abap_structdescr.
* Get the structure of the table.
ref_table_des ?=
 cl_abap_typedescr=>describe_by_name( p_table ).
idetails[] = ref_table_des->components[].
 loop at idetails into xdetails.
 clear xfc.
 xfc-fieldname = xdetails-name .
 xfc-datatype = xdetails-type_kind.
 xfc-inttype = xdetails-type_kind.
 xfc-intlen = xdetails-length.
 xfc-decimals = xdetails-decimals.
 append xfc to ifc.
endloop.
*Add your new field(s) into table ifc here.
endform.
form create_dynamic_itab.
* Create dynamic internal table and assign to FS
call method cl_alv_table_create=>create_dynamic_table
 exporting
 it_fieldcatalog = ifc
 importing
 ep_table = dy_table.
 assign dy_table->* to <dyn_table>.
* Create dynamic work area and assign to FS
create data dy_line like line of <dyn_table>.
assign dy_line->* to <dyn_wa>.
endform.
Regards,
Ferry Lianto

Dynamic parameter against table TVTWT

Similar Messages

Maybe you are looking for