Dynamic parameter doesn't bring in all the data

Hi All,
Crystal 11.5.10.1263
Ok, I'm stumped.
I created a query that brings in all the data.
I pasted the query in the report and it brings in all the data.
I created a simple dynamic parameter to select the "ID" field.
I looked for ID 1539 and saw that tons of IDs were missing,
including 1539.
I've already broken down the report and created tests,
keeping them as simple as possible.
The report without a parameter shows all the data.
I also tried a static parameter just to see what would happen,
and I got the same results as the dynamic parameter - lots of missing data.
I guess that proves it's not the parameter, so I'm stumped.
Signed,
Stumped Jimmy

hey stumped jimmy,
you can increase the number of parameter values via a reg key...
HKEY_CURRENT_USERSoftwareBusiness ObjectsSuite 12.0Crystal ReportsReportView
uisng the decimal value for "PromptingLOVBatchSize".
please see the support note [here |http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333333383331333333363331%7D.do]for more info.
cheers,
jamie

Similar Messages

Analyse big data in Excel? Why the dynamic tables doesn't take all the data from the source table.

Hi,
I'm doing a internship in a production line.
My job is to recover production data (input data) and test data (output data) using various types of software (excel, BusinessObject sap, etc).
To this day, I have recovered hundreds of production data, and have also organized in excel but I need to analyze and plot them.
I would like to know who can give me an idea of how I could plot as much data and analysis.
Now i trying to use dynamic charts and plot some data but I did not get acceptable answers.
How could I compare, analyze and graph for example:
Five columns of production (input) with five (5) columns tested (data output).
After graphing.
Someone can give me a technique to analyze data? ie I compare column by column?
or some other technique? as a conglomerate could analyze data?
o give you an idea of the contect, now I perform an internship in a manufacturing turbines.
My job is to analyze the input data (production) and to estimate the possible behavior of the turbines in the tests.
As I said, use dynamic tables in excel, but i have not idea why the dynamic tables doesn't take all the data from the source table.
I appreciate your advice
Thanks

You can declare as PT source whole Columns [$A:$E], without rows number.
Then You'll have all actually data.
Oskar Shon, Office System MVP - www.VBATools.pl
if Helpful; Answer when a problem solved

Syncing a moved folder is not bringing back all the photos to Lightroom

I have moved and renamed a folder in the external harddrive. Syncing that moved folder in lightroom is not working in bringing back all the photos to Lightroom - Although all the photos exist in that folder as I have confirmed through windows explorer.
Another Option: If I choose "import photos to this folder option" in LR and browse to the source to that folder - the missing photos are shown as shaded back and the import button (bottom right corner) is not highlighted. Therefore I cannot select these missing photos and hence cannot import them to the folder.
PLEASE ADVISE!

In the Folders Panel, the original folder should be listed with a "?" mark, because Lightroom can no longer find it. Right-click on it, select "Find Missing Folder", then browse to and select the renamed folder in its new location.
Note....these type of problems will continue to happen if you continue to rename and/or move folders or files outside of Lightroom. Do it using Lightroom and no such problems will arise.

I scanned an image and want to use the image trace tool, but it doesn't pick up all the lines. Is there a way to darken the lines before using the image trace tool?

I scanned an image and want to use the image trace tool, but it doesn't pick up all the lines. Is there a way to darken the lines before using the image trace tool? Help!

If the scan is in B&W, then play with the Threshold setting here
If it's in Color, then you will have to open the scan in a Raster editing software (like Photoshop) and play with the Brightness/Contrast settings to make the lines bolder.

While creating the parameter it doesnot pull all the data of that particular column

Post Author: pvds
CA Forum: Data Connectivity and SQL
Hi everyone.
i am using a sql query with a join condition to pull data in to crystal reports. I got that data which i want in to the report. but when i was trying to create a parameter with a dropdown of all the database values to a particular column it is not showing all the data from the report.
for example i have a column called state
the column has many states displayed in the report but when i select that column and select browse data it shows only 1 state. with this i am anable to create a parameter with a dropdown list of all the state. i can see different states in the report but y i am not able to see when i browse the data or create a parameter? can any one answer me?
i already created another report with a query on same table but i never faced this problem before.

Post Author: V361
CA Forum: Data Connectivity and SQL
There is a limit to the number of Parameters that will show in a drop down... You can increase using the following.
Check this KBase article on how to increase the number.
http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2017238&sliceId=&dialogID=19032644&stateId=1%200%2019034607

My 2012 MacBook Pro fell and it now makes a clicking noise and shows a grey screen on startup. I'm afraid the hard drive is damaged. Is their anyway to still back up my hard drive even if it doesn't turn on all the way?

So my late 2012 MacBook Pro was sitting on my desk when the desk collapsed. The computer fell with it and I was quite scared at the moment, but thankfully I opened it up and it worked perfectly fine again.
I was later watching a YouTube video and pressed the back button. The screen then froze, and I could not force quit safari. Then this weird clicking noise started to happen. It was coming from the right of the trackpad. That's when I decided to force shutdown the computer with the power button.
I let it sit and then decided to turn it back on. The clicking noise then came back and there was just a blank screen on the boot up. Eventually a grey folder with a question mark started flashing on the screen. That was all it did so I decided to turn it off again.
I'm going to take it into the Apple store ASAP, but I'm curious if my hard drive is damaged and if I will need a new one, which would erase everything on my Mac. So I was wondering if there is anyway to back up the hard driver even if it doesn't boot up all the way, or turn on the computer all the way.
P.S. I have never backed up my hard drive so I wouldn't know what to do.

You may have damaged the HDD which is located in that spot. I would take it in for service.

Dynamic parameter selection from infoview not storing the sql password

We are having the problem of dynamic parameter selection from infoview not storing the sql password as it does for the actual report. We are using Crystal Reports XI Release 2 version 11.5.3.438 (Not sure of SP level, asked in separate thread).
To be more specific.
We have created a report that dynamically populates the parameters of the report by pulling the records from the Informix sql database and allowing selection from there.
In the Central Management Console for the report object we have set as follows:
Process - Database:
Use original database logon information from the report - the sql username and pw etc
Use same database logon as when report is run
Process - Parameters
In selecting a default selection there is the option to put in the sql password, however, this does not stick and clears after update.
As such the end result is that every time this report is run from infoview and a user chooses a parameter (there are 5), crystal goes through some timeout for about a minute or so and then requests the sql password, if a user then selects the next parameter, the same timeout and password dialog appears.
We need the crystal report to handle to the sql password for fetching the parameters as well as for the database section of running the report, however, the parameters insists on the end user always putting the password in.
This is 100% replicatable on our system.
Any way that we can fix this?
Will an update fix this issue? If so could you please advise which one?
Thanks

Hi,
I am having the exact same problem. Any help?
And what does "Use same database logon as when report is run" mean? For me that would be that no prompt is needed for getting values in a dynamic parameter...
Regards
Magnus

I recently got a used macbook pro, and the backlight on the keyboard doesn't light up all the way, I was wondering how much it would cost to get it fixed..

MacBook pro keyboard doesn't light up all the way, I don't know why and I was wondering how much it could cost for repairs.

If there is Warranty or AppleCare it will be covered at Apple Store. If no coverage, Apple does not repair iPhone 4 Power/Lock Button, for $149 they will give you a perfect replacement iPhone 4 exactly like yours with a 90 day Warranty. For the time being or as a permanent solution you can use perfect Virtual Lock Button. Tap Settings App > General > Accessibility > Assistive Touch > ON > tap the new small white screen button > Device > Lock. You can even use this button to turn the iPhone OFF. To turn iPhone ON, connect to power, ie charger or USB port of computer.

How do you share some photos from an album in iphoto to facebook without bringing over all the pictures?

How do you share some from photos from an album in iphoto to facebook without bringing over all the pictures?

Select the photo(s) and click share and share to the face book album you want
LN

Should I take my iPhone 4 to the apple store to get my vibrate button? Because it doesn't go down all the way

My iPhone 4 vibrate button doesn't go down all the way, could I get that fixed?

If it is defective and still under warranty then they wil replace the iphone for free.
If it is not under warranty then you can buy an out of warranty replacement. In the U.S that would cost $149

I just got an iPhone 5s and it won't let me add my hotmail email address to my mail. I can add it under outlook but then it doesn't show me all the emails or folders I have, I have to login in via the we page to view them, too inconvenient... Please help!

I just got an iPhone 5s and it won't let me add my hotmail email address to my mail. I can add it under outlook but then it doesn't show me all the emails or folders I have, I have to login in via the we page to view them, too inconvenient... Please help!

Open Mail app and then click on Mailboxes(Left up)>Go down and select your Hotmail acoount and then try Refreshing by pulling down the list.

Headphone plug doesn't go in all the way

when i try to plug in the earbuds that came with my new ipod (4G, 8GB) into the headphone jack, the plug doesn't go in all the way and only goes in about halfway. i can hear music but whenever i play a song and drop my ipod in my pocket, the slightest movement causes the plug to move and pause the music. its really annoying and happens everytime. is this an abnormality with my ipod or are all ipod 4Gs like this?

Oh my gosh thank you! I didn't wanna apply too much force in fear of breaking a brand new iPod, but I was seriously about to throw it at a wall the next time the plug came out. You're a life saver.

Fire Fox sent not all the data in text form. Reached only piece of information. Where can I find the cache of sent text?

Fire Fox sent not all the data in text form. Reached only piece of information. Where can I find the cache sent the text?
For example, I posted an article on a news site, but found that only a small part of my article was posted.

I'm not sure whether Firefox saved that information. There is a chance that it is in the session history file, especially if you haven't closed that tab yet. To check that:
Open your currently active Firefox settings folder (AKA your Firefox profile folder) using
Help > Troubleshooting Information > "Show Folder" button
Find all files starting with the name sessionstore and copy them to a safe working location (e.g., your documents folder). In order to read a .js file, it is useful to rename it to a .txt file. Or you could drag it to Wordpad or your favorite word processing software.
The script will look somewhat like gibberish, but if you search for a word in your article that doesn't normally appear in web pages, you may be able to find your data.
Any luck?
For the future, you might want to consider this add-on, although I don't know how long it saves data after you submit a form: [https://addons.mozilla.org/en-US/firefox/addon/lazarus-form-recovery/].

SAP MII 14.0 SP5 Patch 11 - Error has occurred while processing data stream Dynamic Query role is not assigned to the Data Server

Hello All,
We are using a two tier architecture.
Our Corp server calls the refinery server.
Our CORP MII server uses user id abc_user to connect to the refinery data server.
The user id abc_user has the SAP_xMII_Dynamic_Query role.
The data server also has the checkbox for allow dynamic query enabled.
But we are still getting the following error
Error has occurred while processing data stream
Dynamic Query role is not assigned to the Data Server; Use query template
Once we add the SAP_xMII_Dynamic_Query role to the data server everything works fine. Is this feature by design ?
Thanks,
Kiran

Thanks Anushree !!
I thought that just adding the role to the user and enabling the dynamic query checkbox on the data server should work.
But we even needed to add the role to the data server.
Thanks,
Kiran

Import package status with successful when all the data have been rejected

Dear all,
We use the import package to import some data files. We check that the status is successful , but all the data are rejected. Is it possible to set the status to error when there are reject records in the data file?
Best Regards,
Jeff

Try to set the MAXREJECTCOUNT parameter in the transformation file to -1. This will create an error or warning if you have rejected records.
Hope this helps.
-Joost

Dynamic parameter doesn't bring in all the data

Similar Messages

Maybe you are looking for