Dynamic Parameter Picklist

I have a dynamic parameter for unit then for workorder. The unit picklist contains only the first 79 out of approx 750 choices. How can I get the entire picklist to show up and/or be able to type ahead select from the entire list?
OR
Be able to simply type in the unit I want all the workorders to be displayed for.
Thanks!

Try to increase the list by editing the registry settings
For CRXI
1. Create a registry key HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.0\Crystal Reports\DatabaseOptions\LOV
2. Add a string value "MaxRowsetRecords" and set the value to the maximum number of values that you desire for your report. For example, a value of 2000 will return up to 2000 values in the lowest level of a cascading parameter. NOTE: The value 0 (Unlimited) will not work with BusinessObjects Enterprise XI or Crystal Reports Server XI, you must specify another value.
3. After making changes to the registry, restart the affected service or application as required
For CRXIR2
1. Create a registry key HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.5\Crystal Reports\DatabaseOptions\LOV
For CR2008
1. Create a registry key HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 12.0\Crystal Reports\DatabaseOptions\LOV
regards,
Raghavendra

Similar Messages

Dynamic Parameter Picklist Filter

I have a Dynamic Parameter (Units) where the first picklist has 750 options and only 79 show up in the list. Is it possible to have the picklist show only the Active Units instead of all 750 Active & Inactive Units. If so, how would I accomplish that?
Thanks much!

Try to increase the list by editing the registry settings
For CRXI
1. Create a registry key HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.0\Crystal Reports\DatabaseOptions\LOV
2. Add a string value "MaxRowsetRecords" and set the value to the maximum number of values that you desire for your report. For example, a value of 2000 will return up to 2000 values in the lowest level of a cascading parameter. NOTE: The value 0 (Unlimited) will not work with BusinessObjects Enterprise XI or Crystal Reports Server XI, you must specify another value.
3. After making changes to the registry, restart the affected service or application as required
For CRXIR2
1. Create a registry key HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.5\Crystal Reports\DatabaseOptions\LOV
For CR2008
1. Create a registry key HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 12.0\Crystal Reports\DatabaseOptions\LOV
regards,
Raghavendra

How to display dynamic parameter picklist based on other parameter?

The report uses two parameters 1. Order placed date and 2. Sales Agent name. First parameter (Order placed date) is a static date range that allows users to enter a date range to run the report. The second parameter is a dynamic parameter that displays Sales Agent names as a picklist. Users can select one or more agent names. This pick list is generated using a SQL command.
We would like to display the names of Sales agents (in the parameter pick list) who were active (i.e. who took orders) between the date range selected in the first parameter.
Currently the picklist, lists names of ALL sales agents (about 100) irrespective of the date selected in first parameter. So, users are forced to go through the entire list of agents instead of agents that were active during that period.
We are using CR 2008 on Edge 3.1.
Any elegant way to achieve this? Your help is appreciated.
Regards,
Mohit.
Edited by: Mohit Saran on Oct 19, 2009 2:46 PM

I realized that the question got posted in Bus Objects General forum and have reposted it in Crystal Reports Design forum (as originally intended). Sorry for the confusion.

Is there any way to add dynamic parameter in sql without breaking Server Behavior

Hello, i'm building multiple language site.. i would like to know if there is possible way to add dynamic parameter in my query, without break the server behavior.
For example:
mysql_select_db($database_dxc_conn, $dxc_conn);
$query_Recordset1 = "SELECT article.articleName, article.articleDesc FROM article";
$Recordset1 = mysql_query($query_Recordset1, $dxc_conn) or die(mysql_error());
$row_Recordset1 = mysql_fetch_assoc($Recordset1);
$totalRows_Recordset1 = mysql_num_rows($Recordset1);
will become something like this:
$additionalSQL=", article.articleName_en";
mysql_select_db($database_dxc_conn, $dxc_conn);
$query_Recordset1 = "SELECT article.articleName, article.articleDesc $additionalSQL FROM article";
$Recordset1 = mysql_query($query_Recordset1, $dxc_conn) or die(mysql_error());
$row_Recordset1 = mysql_fetch_assoc($Recordset1);
$totalRows_Recordset1 = mysql_num_rows($Recordset1);
this is just an example, my real scenarion is far more complicated than this... however this kind of approach break the server behavior and force to do hand-coding...
i would like to know if there's better way to do such thing like this...

viktor.iwan wrote:
Hello, i'm building multiple language site.. i would like to know if there is possible way to add dynamic parameter in my query, without break the server behavior.
Server behaviors are simply bits of boilerplate code automatically generated by Dreamweaver. Editing the code doesn't "break" it (unless your edits are badly written). However, once you edit the code, Dreamweaver no longer recognizes it, so you lose the ability to drag recordset results from the Bindings panel.
If you want to edit server behavior code, the best way to handle it is to lay out your page as you want, using the Bindings panel. Once everything has been done, only then edit the server behavior code.

How to get the list of values for a dynamic parameter using Web Services SDK?

I am struggling to get the list of values for a dynamic parameter of a report.I am using Java Web Services SDK ... I tried to use PromptInfo.getLOV().getValues() method but it does not work.First of all ... is this possible (to get the list of values for a dynamic param) using Web Services?Second of all, if this is possible, how should I do it ... it seems it works fine when running the report from CMC. It asks for DB logon info and after that it provides a list of values.Thx 

Your assumption is correct. We are trying to get the LOVs from the Crystal Report. I was not aware that this is not supported by Web Services SDK.We used Web Services SDK to integrated the Crystal Reports in our web application. We implemented some basic actions for reports: schedule, view instances, run ad-hoc reports.We encountered this problem when trying to run/schedule reports with dynamic parameters (a list of values from DB). We were unable to get the LOVs.Please let me know if you can think of an alternative to look at.Thanks a lot,Catalin

CR2011 Dynamic Parameter does not show list at all

I am upgrading some Crystal Reports from CR 8.5 to 2011. Some would be better served by using a dynamic parameter to allow the user to select the data for the parameter from the database information. I have created a dynamic parameter on the Customer ID and set the description to be the customer name. I have set it to handle multiple values.
When I preview the report in the Crystal designer, I get a text box to type in but not a drop down. To be clear, I am not talking about the LOV 1000 limit here. There are only 50 customers in the sample file I am working with. I tried turning the static parameter into a dynamic one, I deleted the original parameter and created a new one.
In case it matters, the parameter is only used as part of the selection formula and if I enter a proper customer id, it will retrieve the data. This report has about 7 tables (no stored procedures or views) and a subreport of two tables that is linked to the main report on the customer id. The parameter is only used on the main report for record selection. The SQL statement in the main report and subreport did need to be reset when I first opened the report in CR2011 but I did that on both. I have verified the database and the option to verify on first refresh is checked. The original parameter did have an imported list of about 3000 customer names. I tried exporting the CR template to a new file and while the file size changed, the behaviour did not.
When I create a brand new report on two of the tables, including the same customer table, and create the parameter the same way, it shows me the list properly in a dropdown at the prompt stage.
I am not sure where to go here or what else to try. If anyone has any suggestions, I appreciate the help. TIA, rasinc

Thank for the reply Dell,
I see the logic in adding the extra table and keeping it unlinked and I do know the crazy data that can come up if I use it linked to other tables or use the fields in other parts of the programming.
However, I've now tried it several times, creating the parameter on just the name alone, with the ID alone, etc. and I still only get a text box to type into.
I have made sure the original selection criteria
{customer.Id} = {?Customer}
if from the original table, not the new one, which I assume you expected me to do.
So I decided to run the same report through CR XIR2. When I update the Set Datasource Location, I am now getting the message
"Invalid Argument provided.
Details: The alias requested 'company', contains a combination of characters which is not considered to be valid"
Company is a table containing information about the main company, not the customers. The same message pops up for another table as well.
Then I get a message that says:
"Prompting failed with the following error message: 'List of Values failure: fail to get values. [Cause of error: The table company does not exist in the document.]'
Error source: prompt.dll Error code: 0x8004380D"
This appears to be a database access issue but I know the firewalls are not a problem because I can create a new report and get the LOV properly with the same database and same desktop computer. I can take that report created in CR2011 and use it in CRXI also and get the proper LOV. Is it possible I am dealing with template corruption because there were so many items imported into the static list before?

Why Dynamic Parameter is not working, when i create report using stored procedure ?

Post Author: Shashi Kant
CA Forum: General
Hi all
Why Dynamic Parameter is not working, when i create report XI using stored procedure ?
Only i shaw those parameters which i used in my stored procedure, the parameter which i create dynamic using stored procedure
is not shown to me when i referesh the report for viewing the results.
I have used the same procedure which i mention below but can not seen the last screen which is shown in this .
============================================================================================
1. Select View > Field Explorer2. Right-click on Parameter Fields and select New from the right-click menu.3. Enter u201CCustomer Nameu201D as the name for your parameter4. Under u201CList of Valuesu201D select u201CDynamicu201D5. Under the Value column, click where is says u201Cclick here to add itemu201D and select Customer Name from the drop-down list. The dialog shown now look like the one shown below in Figure 1. Click OK to return to your report design.
Dynamic Parameter Setup6. Next, select Report > Select Expert, select the Customer Name field and click OK.7. Using the drop-down list beside select u201CIs Equal Tou201D and using the drop-down list, select your parameter field (it should be the first field). 8. Click OK to return to your report design and see the parameter dialog.The parameter dialog will appear and show you a dynamic list of values that is updated each time your run your report. It couldnu2019t be easier! In our next tutorial, we will be looking at how to use this feature to create cascading parameter fields, where the values are filtered by the preceding selection.
Dynamic Parameters in Action
My question is that whether dynamic parameter is working with storedprocedure or not.
When i added one table and try to fetch records using dyanmic prameters. after that i am not be able to find the dynamic parameter option when i referesh my report.
One more thing when i try the static parameter for my report, the option i see when i referesh the screen.
Please reply soon , it's urgent
Regards
shashi kant

Hi Kishore,
I have tested the issue step by step by following you description, while the first issue works well in my local environment. Based on my research, this can be caused by the lookup expression or it indeed return Male value based on the logic. If you use the
expression below, it will indeed only return the Male record. So please try to double-check the record in the two datasets and the expression in your environment:
=lookup(first(Fields!ProgramID.Value,"DataSet1"),Fields!ProgramID.Value,Fields!Gender.Value,"DataSet2")
As to the second issue, please try to use the following expression:
=Count(Lookup(fields!ProgramID.value,fields!ProgramID.value,fields!Gender.value,"DataSet2"))
Besides, if this issue still exist, in order to trouble shoot this issue more efficiently, could you please post both the .rdl file with all the size properties to us by the following E-mail address? It is benefit for us to do further analysis.
E-mail: [email protected]
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How can we use C# to read dynamic parameter's value list from .rpt?

I'm using Cystal Report 2008. We know starting from CR XI we can create dynamic parameters, the list of items of this kind of parameter are fetching from database. So in general the SQLs to get the list of values for dynamic parameters are stored in the .rpt.
In Crystal Report Designer, if I preview a report with dynamic parameters, it will first query the database and then show the input dialog with list of values from database for user to choose. My question is can we implement the same thing by our C# code? I'm planning to use C# code to read this dynamic parameter's value list from .rpt and render them on the web page. Then pass back the user selected values to the .rpt to run the report after user make the choice. I didn't find any APIs can do this. Is it possible?
Thanks in advance!!

Hi,
Can you explain a bit in detail, I have similar scenario. I am using the following code but not getting the Column name for dynamic parameter list.
foreach (ParameterFieldDefinition prm
                          in reportDocument.DataDefinition.ParameterFields)
                try
                    string vParameterFieldName;
                    *vParameterFieldName = prm.ParameterFieldName.ToString();*
Shakeel

Can I modify the data type of a dynamic parameter?

I am using CR2008 against an Oracle 11 db and have a report with dynamic parameters.
One of the report sources is a custom view that selects all of the possible 'pay ending dates' where one of the fields from this view is used as the source for the dynamic parameter.
The view performs a TRUNC on the date field in an effort to eliminate the TIME component.
The problem is that the parameter definintion defaults to DATE/TIME (vs. just DATE). I'm wondering if there is any way to modify the data type of the parameter to be DATE only.
I've searched several forumns but have not found anything.
One solution I can think of is to have the custom view format the date field as a VARCHAR (sans the time component) which I assume would force the dynamic parameter data type to string, and then have the report perform a todate function on the value when applying the criteria.
Anyone else have an idea? Just seems like CR should allow the developer to specify the data type- especially b/w Date and Date/Time, rather than make an assumption.
Thank you in advance-
emaher

emaher,
Here's what you can do:
Leave the existing date column as it is in the view...
Just add another column to the view that casts the the date as a VarChar data type and formats the date as you would like it to be.
So now you'll have 2 date columns in the view... 1 that's still a date and another that a character string.
Now for your parameter, use the date version as the parameter value and the text version as the parameter description.
Be sure to set the "Prompt with description only" is set to true.
This way the user sees the LoV in the desired format but there's not need to wrangle it back into a date for data selection.
HTH,
Jason

How to hide Dynamic Parameter userid/password prompts on infoview

Hi,
I want to hide Userid/password for each dynamic parameter, which gets prompts while refreshing or scheduling a report
I do enter userid and password at CMC->database level but when report has dynamic parameter it still does prompts for each parameter.
Please advise.
Megha

I tried what you suggested..
Well I run into different error now while refreshing report suing dynamic prompt.
Error says 'List of Values failure: fail to get values.[Cause of error:Failed to the connetion.ProductName]
ProductName is my dynamic Parameter.
Please advise.
thanks
Megha

What is the maximum number of records in a dynamic parameter list of values?

In Crystal Reports Developer, I am attempting to add a dynamic parameter from a view. The view has 6773 total records. The field used for the parameter has 1819 distinct values, none of which are null.
I have the parameter set to allow multiple values, and I have added
field is equal to parameter
in the select expert.
However, when I refresh the report and tell it to prompt for new parameters, the list of values does not contain all the values, so about half of the records are dropped.
Is there a way I can guarantee that all 1819 (or an unlimited number) records show up in the List of Values?

This has been answered. Search forums for the results

Report Viewer Dynamic Parameter List not showing a complete list of values

Hi, I have installed the crystal report runtime 13.0.1.220 for framework 4.0 in a 64-bit windows 7 professional server.
I have an aplication that opens crystal reports using the crystal report viewer control for visual studio 2010, also version 13.0.1.220.
ISSUE: The report opens fine, but it does not shows all the available values in the dynamic parameter list.
I have tried setting the MaxRowsetRecords registry key to diferent values but it does not work.
I do not have any crystal report stand alone version installed in my server.
Please help me?

Hi Ludek,
yes i followed the instructions of the KBase you are mentioning, but it isn't working for me.
I modified the following keys:
HKEY_LOCAL_MACHINE\SOFTWARE\SAP BusinessObjects\Crystal Reports for .NET Framework4.0\Crystal Reports\DatabaseOptions\LOV
and
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\SAP BusinessObjects\Crystal Reports for .NET Framework4.0\Crystal Reports\DatabaseOptions\LOV
1) I had to create the LOV key under the DatabaseOptions in both keys.
2) Inside the LOV keys I created the new string value MaxRowsetRecords and set the value to different values. (Ex: 5000, 10000 and 1000000)
3) I restarted my server. Still not working.
4) Then after that i modified the following registry keys: (leaving the first 2 keys modified)
HKEY_CURRENT_USER\Software\SAP BusinessObjects\Crystal Reports for .NET Framework4.0\Crystal Reports\DatabaseOptions\LOV
and
HKEY_CURRENT_USER\Software\SAP BusinessObjects\Crystal Reports for .NET Framework4.0\Crystal Reports Designer Component\DatabaseOptions\LOV
5) Also had to create the LOV key under the DatabaseOptions in both keys.
6) Inside the LOV keys I created the new string value MaxRowsetRecords and set the value to different values. (Ex: 5000, 10000 and 1000000)
7) Restarted my server. still not working
8) Then after that i modified the following registry key: (leaving the first 4 keys modified)
HKEY_CURRENT_USER\Software\SAP BusinessObjects\Crystal Reports for .NET Framework4.0\Crystal Reports Designer Component\ReportView
Inside this key I created the DWORD PromptingLOVBatchSize and gave it a decimal value of 1000000
9) Restarted the server. Still not working. For crying out LOUD!!

Crystal Report Dynamic Parameter for SAP B1 version 8.8

Hi, does anyone have problem with the dynamic parameter prompt for Crystal Report in SAP B1 version 8.8?
For example:
1. For static parameter that allows multiple value --> In SAP B1 v8.8, there is a check-box and a "..." button next to it. When you click the "..." button, a new window appear with a list of values to choose.
2. For static parameter that does not allow multiple value --> In SAP B1 v8.8, there is one field with a drop-down menu.
3. For dynamic parameter that allows multiple value and does not allow range values --> In SAP B1 v8.8, just one field for us to key in the value. Shouldn't this be the same as No. 1?
4. For dynamic parameter that does not allow multiple value and does not allow range values --> In SAP B1 v8.8, same as No.3 above. Shouldn't this be the same as No. 2?
How do I get no. 3 dynamic parameter that allows multiple value and does not allow range values to have a check-box and a "..." button next to it to allow us to select multiple values?

Hi Shwu Hua Gan,
Thank you for your reply.
Please forgive me as I don't really understand what you are saying here. To be honest, I'm very new to Crystal Report and my understanding of CR is just the very basics. I'm actually not from a technical background which makes it more difficult.
In your reply:
Ie, you create a parameter in Crystal report, and by using the token eg:Mytest@select * from OCRD, it gives you the benefits of selecting the list from the database.
How do you do this by using the token? All I did is just select the parameter type (dynamic) and then select the table. When I preview the report in SAP B1 8.8, it doesn't prompt me like how I expect it to be. It is a blank field that I have to key in the value myself and then only the report will generate. Sometimes I don't remember what value to key in, so I have to do a formatted search for the blank field. After the report is generated, I can reselect the value (multiple values) from the CR viewer panel toolbar and refresh the report.

How to pass dynamic parameter to a database function in OBIEE

Hi,
I have a requirement like this. I have to create one report in OBIEE which was in Discoverer. Now in discoverer report there are some calculated item in the worksheet based on database pkg.functions. The parameter which user gives at run time that parameters are then passed to the discoverer calculated items dynamically. But I am not able to do this in OBIEE answers.
Can anyone tell me step by step how I can able to pass the user selected parameter values in OBIEE answer level.
The example:
GET_COMM_VALUE_PTD("AFE Cost & Commitment".Afe Id,:"Period Name(AFE)","AFE Cost & Commitment".Data Sel,"AFE Cost & Commitment".Org Id)
GET_COMM_VALUE_PTD --- Function database
("AFE Cost & Commitment".Afe Id,:"Period Name(AFE)","AFE Cost & Commitment".Data Sel,"AFE Cost & Commitment".Org Id --- Parameters... :"Period Name(AFE)" is the dynamic parameter selected run time by user.
Please help.
Thanks
Titas

Hi,
I already did that. But the existing discoverer re value report is showing correct value but the OBIEE report with EVALUATE function shows incorrect value.
The requirement is to create a OBIEE Dashboard from a Discoverer existing report. Now in discoverer report theere are several calculated items in worksheet level where database custom function is used and user selected parameter value is passed run time in that function. But when that is created in OBIEE with EVALUATE function in RPD, the report shows incorrect data. Could not understand how to pass the parameter value runtime.
Below is the discoverer 'Show SQL' query and EVALUATE function syntax which has been used.
SELECT APPS.XXBG_PL_PROJ_ANALYSIS_AFE_PKG.GET_COMM_VALUE_PTD(XXBG_PL_PROJ_AFE_V.AFE_ID,
:"Period Name(AFE)",
XXBG_PL_PROJ_AFE_V.DATA_SEL,
XXBG_PL_PROJ_AFE_V.ORG_ID),
XXBG_PL_PROJ_AFE_V.AFE_DESC,
XXBG_PL_PROJ_AFE_V.AFE_NUMBER,
XXBG_PL_PROJ_AFE_V.APPROVED_AFE_AMOUNT
FROM APPS.PA_PERIODS_ALL PA_PERIODS_ALL,
APPS.XXBG_PL_PROJ_AFE_V XXBG_PL_PROJ_AFE_V
WHERE ((XXBG_PL_PROJ_AFE_V.ORG_ID = PA_PERIODS_ALL.ORG_ID))
AND (XXBG_PL_PROJ_AFE_V.DATA_SEL = :"Data Selection(AFE)")
AND (PA_PERIODS_ALL.PERIOD_NAME = :"Period Name(AFE)")
AND (XXBG_PL_PROJ_AFE_V.AFE_NUMBER = :"AFE Number(AFE)")
AND (XXBG_PL_PROJ_AFE_V.OPERATING_UNIT = :"Operating Unit(AFE)")
The EVALUATE function syntax is as below:
EVALUATE('XXBG_PL_PROJ_ANALYSIS_AFE_PKG.GET_COMM_VALUE_PTD(%1,%2,%3,%4)' AS FLOAT , "BG PL Project Analysis Report_1"."AFE Cost & Commitment"."AFE Cost & Commitment.Afe Id", "BG PL Project Analysis Report_1"."Periods 1"."Periods 1.Period Name", "BG PL Project Analysis Report_1"."AFE Cost & Commitment"."AFE Cost & Commitment.Data Sel", "BG PL Project Analysis Report_1"."AFE Cost & Commitment"."AFE Cost & Commitment.Org Id")
The PERIOD needs to be passed at run time which user will select.
Please help to solve the issue.

Dynamic parameter selection from infoview not storing the sql password

We are having the problem of dynamic parameter selection from infoview not storing the sql password as it does for the actual report. We are using Crystal Reports XI Release 2 version 11.5.3.438 (Not sure of SP level, asked in separate thread).
To be more specific.
We have created a report that dynamically populates the parameters of the report by pulling the records from the Informix sql database and allowing selection from there.
In the Central Management Console for the report object we have set as follows:
Process - Database:
Use original database logon information from the report - the sql username and pw etc
Use same database logon as when report is run
Process - Parameters
In selecting a default selection there is the option to put in the sql password, however, this does not stick and clears after update.
As such the end result is that every time this report is run from infoview and a user chooses a parameter (there are 5), crystal goes through some timeout for about a minute or so and then requests the sql password, if a user then selects the next parameter, the same timeout and password dialog appears.
We need the crystal report to handle to the sql password for fetching the parameters as well as for the database section of running the report, however, the parameters insists on the end user always putting the password in.
This is 100% replicatable on our system.
Any way that we can fix this?
Will an update fix this issue? If so could you please advise which one?
Thanks

Hi,
I am having the exact same problem. Any help?
And what does "Use same database logon as when report is run" mean? For me that would be that no prompt is needed for getting values in a dynamic parameter...
Regards
Magnus

Dynamic Parameter Picklist

Similar Messages

Maybe you are looking for