Dynamic Parameter takes ages

Hello all,
I have a strange issue here. When I use dynamic parameters for my Customer account number CR takes forever to load. I mean forever!! I have ran the report at 15:45 and at this time it is 15:59 and still the parameters are not loaded.
If I use static parameters instead, the parameter loads really quickly.
Please note: this only happens with Customer Account number. This does not reflect if I choose Product group, Sales area etc as dynamic parameters.
Do you think it is to do with Database field values (I mean is it because they are way tooo many user accounts?)
please advise.
many thanks
Kind Regards
Jehanzeb

Thanks Fritz,
There are allot of account numbers and yes you are right they will never look into the whole long list for the account number.
However, remembering an account number would be hard too specially when it is 00100100 or 1010100 etc.
I thought I might give them an optional drop down menu however I don't think it is possible in this case as MD will start shouting at me if the loading times are sky high!.
Regards
Jehanzeb

Similar Messages

Dynamic parameter takes forever to load

I have a dynamic parameter that takes forever to load. I made the report using CR11 and that parameter took like a couple of seconds to populate the data. Now I am using CR13 latest version and it takes around 5 minutes to load 50 records.
Any help will be really appreciate it.

Hi Otto,
Does it happen with all reports that have Dynamic Prompts?
Did you try creating a sample report (maybe against the Xtreme Sample Database) with dynamic prompts and see whether you experience the same behaviour?
-Abhilash

CR2011 Dynamic Parameter does not show list at all

I am upgrading some Crystal Reports from CR 8.5 to 2011. Some would be better served by using a dynamic parameter to allow the user to select the data for the parameter from the database information. I have created a dynamic parameter on the Customer ID and set the description to be the customer name. I have set it to handle multiple values.
When I preview the report in the Crystal designer, I get a text box to type in but not a drop down. To be clear, I am not talking about the LOV 1000 limit here. There are only 50 customers in the sample file I am working with. I tried turning the static parameter into a dynamic one, I deleted the original parameter and created a new one.
In case it matters, the parameter is only used as part of the selection formula and if I enter a proper customer id, it will retrieve the data. This report has about 7 tables (no stored procedures or views) and a subreport of two tables that is linked to the main report on the customer id. The parameter is only used on the main report for record selection. The SQL statement in the main report and subreport did need to be reset when I first opened the report in CR2011 but I did that on both. I have verified the database and the option to verify on first refresh is checked. The original parameter did have an imported list of about 3000 customer names. I tried exporting the CR template to a new file and while the file size changed, the behaviour did not.
When I create a brand new report on two of the tables, including the same customer table, and create the parameter the same way, it shows me the list properly in a dropdown at the prompt stage.
I am not sure where to go here or what else to try. If anyone has any suggestions, I appreciate the help. TIA, rasinc

Thank for the reply Dell,
I see the logic in adding the extra table and keeping it unlinked and I do know the crazy data that can come up if I use it linked to other tables or use the fields in other parts of the programming.
However, I've now tried it several times, creating the parameter on just the name alone, with the ID alone, etc. and I still only get a text box to type into.
I have made sure the original selection criteria
{customer.Id} = {?Customer}
if from the original table, not the new one, which I assume you expected me to do.
So I decided to run the same report through CR XIR2. When I update the Set Datasource Location, I am now getting the message
"Invalid Argument provided.
Details: The alias requested 'company', contains a combination of characters which is not considered to be valid"
Company is a table containing information about the main company, not the customers. The same message pops up for another table as well.
Then I get a message that says:
"Prompting failed with the following error message: 'List of Values failure: fail to get values. [Cause of error: The table company does not exist in the document.]'
Error source: prompt.dll Error code: 0x8004380D"
This appears to be a database access issue but I know the firewalls are not a problem because I can create a new report and get the LOV properly with the same database and same desktop computer. I can take that report created in CR2011 and use it in CRXI also and get the proper LOV. Is it possible I am dealing with template corruption because there were so many items imported into the static list before?

Can't delete dynamic parameter after deleting command

I have a report that I inherited. It used commands instead of stored procedures to retrieve the data. I needed the data in a stored procedure, so I went through and systematically switched everything over to the stored procedure fields. When I thought I had it all moved over to the new fields, I deleted the commands. I then went to publish the report using the Publishing Wizard. It told me that I had unused parameters. When I went back to check the report, I found 2 unused parameters. I tried to delete or edit them and I can't do either function (I click the delete or edit option and nothing happens). I tried adding the command back in, but I still couldn't delete them. The parameters are definitely not being used anywhere in the report because: 1) I have checked everywhere and 2) they do not display the usual check mark when a field is being used.
This is an extremely complex report, and it is database intensive on a production server (I've brought the system and its users to its knees by attempting to run the report. It is designed to run at 5am and it still takes an hour). So, I'd really rather not recreate the report.
Does anyone have any ideas?
I saw someone else had this issue in April, 2007 (Can't delete a dynamic parameter from report), but it never got resolved (I imagine the user recreated the report).
Thanks.
Lisa

Lisa,
Just taking a guess here (being that I've never seen this happen before)...
1st thing I'd try... Go back to an unaltered version of the report. and see if you can delete the parameter prior to any other modifications.
2nd thing... Add the parameter to the report design and refresh. This should cause the parameters to prompt for values. Hopefully this will, in turn, allow you to modify the parameters.
Jason

Dynamic parameter with 'type-ahead' capability

Hi,
How do I create a dynamic parameter that will return a drop down list of over 11,000 records in alphabetic order that I can then select the value I want by starting to type in the value. For example, in a list of cities of the world I want to select 'London' so I type in an 'L' and the list moves to the first city starting with an 'L', I then type an 'o' and the list goes to 'Lo' etc.
At the moment only 30 values appear in the drop-down list and I can only enter the first letter.
I want to use this value as the parent for a cascading parameter.
Thanks, Colin

The dynamic parameter does not have the functionality to 'type-ahead' and go to specific values in the list in that manner. The most you can do is go to values that start with a specific letter and scroll through them. This behavior is occurring by design.
By default, Crystal Reports will only return the first 1000 unique values for a dynamic parameter. This can be changed through a registry entry.
For information on changing the values retrieved for the dynamic parameter, you can refer to the following Business Objects Note.
- Go to this link
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_ossnotes&query=&adv=true
- Search for the Note: 1218588
When using a dynamic parameter, the limit will be a combination of all the values return at each level to reach the total number of records returned. Also the more records that you return to the dynamic parameter, the longer it will take to retrieve the data from the database.

Dynamic parameter with unlinked table

Post Author: martinh
CA Forum: Data Connectivity and SQL
Hello,
I have 2 tables in my database. One table (table A) is for selecting the data (all kind of fields)
The other table (table B) is only to be used to have a parameter selection (table with name, value records). These tables have no link with eachother.
I need to have 8 parameter fields and each parameter field must pick a value from table B.
In my recordselection (on table A) I have tests to select records depending on parameters.
I have this working using 8 static parameters, but I have a list of 16 values.
So that means that for each of the 8 parameters I must enter those 16 values (and also in formula-fields I have make tests; total 8x16 lines of coding)
Therefore I wanted to use a table with the 16 values and link the 8 parameters to table B.
The problem is that CR says that there are 2 startpoints and also I see that the data is selected several times.
So how can I use table B only for the parameters without the need of linking this table B to table A, because there is no way to link this.
Hope anyone can help, because I didn't fond any documentation talking about this situation.
I'm using CR XI and CR 2008
Thanks for your reply!
Martin

The dynamic parameter does not have the functionality to 'type-ahead' and go to specific values in the list in that manner. The most you can do is go to values that start with a specific letter and scroll through them. This behavior is occurring by design.
By default, Crystal Reports will only return the first 1000 unique values for a dynamic parameter. This can be changed through a registry entry.
For information on changing the values retrieved for the dynamic parameter, you can refer to the following Business Objects Note.
- Go to this link
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_ossnotes&query=&adv=true
- Search for the Note: 1218588
When using a dynamic parameter, the limit will be a combination of all the values return at each level to reach the total number of records returned. Also the more records that you return to the dynamic parameter, the longer it will take to retrieve the data from the database.

Static or Dynamic parameter

hi all,
please help me regarding this....
1)How to know whether a given parameter is a static parameter or dynamic parameter.
2)If we change dynamic parameter value using "alter system statment .." we no need to bounce the database right , that parameter change will apply to the database.
am i right???????
3)If we change static parameter value using "alter system statment .." we need to bounce the database right , than only the parameter change will apply to the database.
am i right???????????
Regards,
Vamsi.

Hi Vamsi,
1) for the parameters which can be altered by "SCOPE=BOTH" are the Dynamic parameters right,
Right
Eg:
SQL> SHO PARAMETER %PGA%
NAME TYPE VALUE
pga_aggregate_target big integer 0
SQL> ALTER SYSTEM SET PGA_AGGREGATE_TARGET=700 SCOPE=BOTH;
SQL> SHO PARAMETER %PGA%
NAME TYPE VALUE
pga_aggregate_target big integer 700
2)for the parameters which can be altered by "SCOPE=SPFILE" or "SCOPE=PFILE" are the static parameters.
yes
SQL> SHOW PARAMETER %CONTROL_FILE%
The parameters are written into the pfile as a text and the changes take affects after restarting the database.
But the SPFILE can not be change without issuing the dynamic parameter during run time of the database.There are so many parameters that can not be changed dynamically,we have to use the PFILE to make the changes.In that situation,we perform the following this to make the changes in SPFILE using PFILE.
First,open the PFILE and write the changes as a static parameter and save the changes .Now enter the following command to reflect the chnage into SPFILE :
SQL> CREATE SPFILE FROM PFILE;
NOTE: The database should be in shut mode to make changes in the SPFILE otherwise,it can occur the error message.
Hope your all doubts are clear.
Best regards,
Rafi.
http://rafioracledba.blogspot.com/
Edited by: Rafi (Oracle DBA) on Apr 12, 2011 1:52 AM

Dynamic Parameter only showing 1000 records when Crystal report is run.

I have created a crystal report using ODBC access to a table that has 3000 records. I created a dynamic parameter to pull a list of all the Customer ID's in a customer table and the parameter will only show the 1st 1000 records. In addition I cannot type in the customer ID that I would like. Version of Crystal - Crystal 11.

Oh, darn. So sorry. Looks like I hyperlinked the wrong URL (You'd think I got that down by now...). Anyhow here is the correct link:
1218588 - How to increase the number of values in a dynamic parameter list in Crystal Reports?
And in case the link does not work, or I goofed again, here is a copy of the resolution:
Resolution
CAUTION
The following resolution involves editing the registry. Using the Registry Editor incorrectly can cause serious problems that may require you to reinstall the Microsoft Windows operating system. Use the Registry Editor at your own risk. For information on how to edit the registry key, view the 'Changing Keys and Values' online Help topic in the Registry Editor (Regedit.exe). It is strongly recommended that you make a backup copy of the registry files before you edit the registry.
To increase the maximum number of values available in a dynamic parameter list of values, set the registry key: MaxRowsetRecords, to a value greater than 1,000.
Open the Microsoft Registry Editor, and navigate to the path corresponding to the version of Crystal Reports used:
Crystal Reports XI:
- HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.0\Crystal Reports\DatabaseOptions\LOV
Crystal Reports XI R2:
- HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.5\Crystal Reports\DatabaseOptions\LOV
Crystal Reports 2008:
- HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 12.0\Crystal Reports\DatabaseOptions\LOV
Crystal Reports 2011:
- HKEY_LOCAL_MACHINE\SOFTWARE\SAP BusinessObjects\Suite XI 4.0\Crystal Reports\DatabaseOptions\LOV
Crystal Reports 2013:
- HKEY_LOCAL_MACHINE\SOFTWARE\SAP BusinessObjects\Suite XI 4.0\Crystal Reports\DatabaseOptions\LOV
Crystal Reports for Visual Studio 2010:
- HKEY_LOCAL_MACHINE\SOFTWARE\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Crystal Reports\DatabaseOptions\LOV
NOTES:
- Add the key: LOV, if it is not present.
- For 64 bit version of Microsoft Windows, the registry path will be slightly different, it will start with:
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\...
But the rest of the registry path is the same.
Add the String value: MaxRowsetRecords
Set the value of: MaxRowsetRecords to the maximum number of values to display in the List of Values.
For example, a value of 2000 will return up to 2000 values in the lowest level of a dynamic cascading parameter.
IMPRTANT NOTES:
- The higher the number of values is, the longer it will take the see the dynamic parameter prompt screen. In brief, it impact the performance.
- The value 0 (Unlimited) will not work with BusinessObjects Enterprise XI or Crystal Reports Server XI, you must specify another value.
After making changes to the registry, close and reopen Crystal Reports, or restart the Crystal Reports services for the BusinessObjects platforms.
- Ludek

FAST enabled MView takes ages to refresh

Hi All,
I have a materlialized view which is based on a single fact table ( OAS_BALANCE_UNIONED 11,445,156 rows) and a bunch of dimension tables each containing limited number of rows (a typical start schema).
The conditioins to make the mview fast refreshable have been met so the mview created successfully with the FAST option.
The mview then worked just fine after than and had been refreshing FAST (6 minutes) for the whole day till other mviews started to refresh in the same time. Some of those mviews read from some of the base tables of the mview in question. Since then, the mivew has started to take ages (3 hours) to refresh. There is surely something wrong because the COMPLETE refresh was faster than that.
Later, I stopped all the refresh jobs of the other mviews. Yet, the FAST mview still has the same problem of taking ages to refresh.
When I monitored the session that refreshes the mview, I noticed in the "Long Ops" that
most of the time is spent on a step named as "Hash Join" (it appears in the Message column). Hash join occurrs because of the outer join.
Why my FAST mview suddenly started to take so long time to refresh?
How can I make my FAST mivew really refresh fast?
Technical Details are below:
OS: Windows 2003 32-bit
DB version: Oracle 10g R1 ( 10.1.0.2.0 )
CREATE MATERIALIZED VIEW FACT_BAL_MV
BUILD DEFERRED
REFRESH FAST ON DEMAND
WITH PRIMARY KEY
AS
SELECT B.cmpcode BAL_KEY,
       B.CMPCODE,
       B.YR,
       B.PERIOD,
       B.BALCODE,
       B.CURCODE,
       B.REPBASIS,
       TO_NUMBER (B.YR || LPAD (B.PERIOD, 2, 0)) DIM_PERIOD_MV,
       D_CMP.DIM_KEY DIM_COMPANY,
       D_CUR.DIM_KEY DIM_CURRENCY,
       D_EL_1.DIM_KEY DIM_EL_1,
       D_EL_2.DIM_KEY DIM_EL_2,
       D_EL_3.DIM_KEY DIM_EL_3,
       D_EL_4.DIM_KEY DIM_EL_4,
       GRP_1_P_EL.DIM_KEY DIM_GRP_1_P_EL,
       D_GRP_1_B_EL.DIM_KEY DIM_GRP_1_B_EL,
       D_GRP_1_K_EL.DIM_KEY DIM_GRP_1_K_EL,
       D_GRP_2_D_EL.DIM_KEY DIM_GRP_2_D_EL,
       D_GRP_3_E_EL.DIM_KEY D_GRP_3_E_EL,
       B.ROWID X_OB_ROWID,
       D_CMP.ROWID X_CMP_ROWID,
       D_CUR.ROWID X_CUR_ROWID,
       D_EL_1.ROWID X_EL_1_ROWID,
       D_EL_2.ROWID X_EL_2_ROWID,
       D_EL_3.ROWID X_EL_3_ROWID,
       D_EL_4.ROWID X_EL_4_ROWID,
       GRP_1_P_EL.ROWID X_GRP_1_P_EL_ROWID,
       GRP_1_P.ROWID X_GRP_1_P_ROWID,
       D_GRP_1_B_EL.ROWID X_GRP_1_B_EL_ROWID,
       D_GRP_1_B.ROWID X_GRP_1_B_ROWID,
       D_GRP_1_K_EL.ROWID X_GRP_1_K_EL_ROWID,
       D_GRP_1_K.ROWID X_GRP_1_K_ROWID,
       D_GRP_2_D_EL.ROWID X_GRP_2_D_EL_ROWID,
       D_GRP_2_D.ROWID X_GRP_2_D_ROWID,
       D_GRP_3_E_EL.ROWID X_GRP_3_E_EL_ROWID,
       D_GRP_3_E.ROWID X_GRP_3_E_ROWID
FROM CLVE_STAGING.OAS_BALANCE_UNIONED B,
       FINANCE.DW_DIM_COMPANY D_CMP,
       FINANCE.DW_DIM_CURRENCY D_CUR,
       FINANCE.DW_DIM_EL_1 D_EL_1,
       FINANCE.DW_DIM_EL_2 D_EL_2,
       FINANCE.DW_DIM_EL_3 D_EL_3,
       FINANCE.DW_DIM_EL_4 D_EL_4,
       FINANCE.DW_DIM_GRP_1_P_EL GRP_1_P_EL,
       FINANCE.DW_DIM_GRP_1_P GRP_1_P,
       FINANCE.DW_DIM_GRP_1_B_EL D_GRP_1_B_EL,
       FINANCE.DW_DIM_GRP_1_B D_GRP_1_B,
       FINANCE.DW_DIM_GRP_1_K_EL D_GRP_1_K_EL,
       FINANCE.DW_DIM_GRP_1_K D_GRP_1_K,
       FINANCE.DW_DIM_GRP_2_D_EL D_GRP_2_D_EL,
       FINANCE.DW_DIM_GRP_2_D D_GRP_2_D,
       FINANCE.DW_DIM_GRP_3_E_EL D_GRP_3_E_EL,
       FINANCE.DW_DIM_GRP_3_E D_GRP_3_E
WHERE     B.CMPCODE = D_CMP.CODE
       AND (B.CMPCODE = D_CUR.CMPCODE(+) AND B.CURCODE = D_CUR.CODE(+))
       AND (B.CMPCODE = D_EL_1.CMPCODE(+) AND B.EL1 = D_EL_1.EL_CODE(+))
       AND (B.CMPCODE = D_EL_2.CMPCODE(+) AND B.EL2 = D_EL_2.EL_CODE(+))
       AND (B.CMPCODE = D_EL_3.CMPCODE(+) AND B.EL3 = D_EL_3.EL_CODE(+))
       AND (B.CMPCODE = D_EL_4.CMPCODE(+) AND B.EL3 = D_EL_4.EL_CODE(+))
       AND (GRP_1_P_EL.CMPCODE = GRP_1_P.CMPCODE(+)
            AND GRP_1_P_EL.GRP_CODE = GRP_1_P.GRP_CODE(+))
       AND (B.CMPCODE = GRP_1_P_EL.CMPCODE(+)
            AND B.EL1 = GRP_1_P_EL.EL_CODE(+))
       AND (D_GRP_1_B_EL.CMPCODE = D_GRP_1_B.CMPCODE(+)
            AND D_GRP_1_B_EL.GRP_CODE = D_GRP_1_B.GRP_CODE(+))
       AND (B.CMPCODE = D_GRP_1_B_EL.CMPCODE(+)
            AND B.EL1 = D_GRP_1_B_EL.EL_CODE(+))
       AND (D_GRP_1_K_EL.CMPCODE = D_GRP_1_K.CMPCODE(+)
            AND D_GRP_1_K_EL.GRP_CODE = D_GRP_1_K.GRP_CODE(+))
       AND (B.CMPCODE = D_GRP_1_K_EL.CMPCODE(+)
            AND B.EL1 = D_GRP_1_K_EL.EL_CODE(+))
       AND (D_GRP_2_D_EL.CMPCODE = D_GRP_2_D.CMPCODE(+)
            AND D_GRP_2_D_EL.GRP_CODE = D_GRP_2_D.GRP_CODE(+))
       AND (B.CMPCODE = D_GRP_2_D_EL.CMPCODE(+)
            AND B.EL2 = D_GRP_2_D_EL.EL_CODE(+))
       AND (D_GRP_3_E_EL.CMPCODE = D_GRP_3_E.CMPCODE(+)
            AND D_GRP_3_E_EL.GRP_CODE = D_GRP_3_E.GRP_CODE(+))
       AND (B.CMPCODE = D_GRP_3_E_EL.CMPCODE(+)
            AND B.EL3 = D_GRP_3_E_EL.EL_CODE(+));
CREATE INDEX FINANCE.DW_FACT_BAL_MV_INX
ON FACT_BAL_MV (X_OB_ROWID);
SQL> select count(X_OB_ROWID) from FACT_BAL_MV ;
COUNT(X_OB_ROWID)
         11444816
Elapsed: 00:00:27.85
SQL> select bytes/1024/1024/1024 GB from
user_segments where segment_name='FACT_BAL_MV';
        GB
4.4296875search id: redcorolla

Hard to say why the refresh is now slow. Possibilties include
* system resources implemented by the fast refresh
* something changed on the query making the background query run slowly
Look at the query first. 18 tables, with almost every join an outer join. Some of the tables appear more than once in the query.
Get an executioion plan to see how the query is being executed.

TS1368 I want to delete a lot of things childrens stories, albums which are not used which that are on my ipad. However when I go through Itunes it wont show me most of the stuff in my library. it takes ages to delete one at a time.

I want to delete a lot of things childrens stories, albums which are not used which that are on my ipad. However when I go through Itunes it wont show me most of the stuff in my library. it takes ages to delete one at a time.
Can you help please?

Thanks King_Penguin for taking time to read and reply.
I just purchased this movie on Thursday, May 15, so just a few days ago. I have never had any trouble whatsoever since I have been in Vietnam. I have downloaded several movies and even music and they have all synced to my respected Apple products except for this purchase.
Sorry, I don't quite understand what you mean by studios and different versions. Could you please explain?
I checked my purchased list in my purchase history under my account and there are no hidden items.

When i log on to thunderbird, the in box has the message, 'building summary file', this then takes ages to do . how do I stop it doing this every time I log on?

Hello,
This problem has only started happening in the last few days. Every time i log on the get emails, the inbox has a message saying 'building summary file'. it then takes ages to do this. i have tried deleting most of the in box and compacting the file but it still continues.

Try restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates.

Is there any way to add dynamic parameter in sql without breaking Server Behavior

Hello, i'm building multiple language site.. i would like to know if there is possible way to add dynamic parameter in my query, without break the server behavior.
For example:
mysql_select_db($database_dxc_conn, $dxc_conn);
$query_Recordset1 = "SELECT article.articleName, article.articleDesc FROM article";
$Recordset1 = mysql_query($query_Recordset1, $dxc_conn) or die(mysql_error());
$row_Recordset1 = mysql_fetch_assoc($Recordset1);
$totalRows_Recordset1 = mysql_num_rows($Recordset1);
will become something like this:
$additionalSQL=", article.articleName_en";
mysql_select_db($database_dxc_conn, $dxc_conn);
$query_Recordset1 = "SELECT article.articleName, article.articleDesc $additionalSQL FROM article";
$Recordset1 = mysql_query($query_Recordset1, $dxc_conn) or die(mysql_error());
$row_Recordset1 = mysql_fetch_assoc($Recordset1);
$totalRows_Recordset1 = mysql_num_rows($Recordset1);
this is just an example, my real scenarion is far more complicated than this... however this kind of approach break the server behavior and force to do hand-coding...
i would like to know if there's better way to do such thing like this...

viktor.iwan wrote:
Hello, i'm building multiple language site.. i would like to know if there is possible way to add dynamic parameter in my query, without break the server behavior.
Server behaviors are simply bits of boilerplate code automatically generated by Dreamweaver. Editing the code doesn't "break" it (unless your edits are badly written). However, once you edit the code, Dreamweaver no longer recognizes it, so you lose the ability to drag recordset results from the Bindings panel.
If you want to edit server behavior code, the best way to handle it is to lay out your page as you want, using the Bindings panel. Once everything has been done, only then edit the server behavior code.

Setting up my Line6 UX1 with Audtion 3.0 on Win7 - settings dialog takes ages to respond

I downloaded the trial of Adobe Audition 3.0 (I've been using 1.5 on WinXP for a few years now and it's always been fine to use!)
I am trying to set up my Line6 POD Studio UX1 with Audtion 3.0 on Windows 7 Pro (64 Bit - 32GB RAM Quad Core Intel i7 3770 Processor)
I am noticing that the Settings dialog takes ages to respond and update with the changes I make - when I eventually managed to get playback - the playback only came out on the left monitor.
I should mention that I am doing this on a previous Audition 1.5 session - Audition 3.0 saved the session as a new session so I think that should be fine.
What I'm looking for here is the correct settings I need to use in Audition 3.0 to use my UX1.
I don't want to pay for Audition 3.0 if it's not going to work for me!

You won't be able to pay for Audition 3 since it was discontinued several years ago. However you may be able to upgrade to AA3 for free as a previous Audition user.
http://forums.adobe.com/thread/1129138?tstart=0

How to get the list of values for a dynamic parameter using Web Services SDK?

I am struggling to get the list of values for a dynamic parameter of a report.I am using Java Web Services SDK ... I tried to use PromptInfo.getLOV().getValues() method but it does not work.First of all ... is this possible (to get the list of values for a dynamic param) using Web Services?Second of all, if this is possible, how should I do it ... it seems it works fine when running the report from CMC. It asks for DB logon info and after that it provides a list of values.Thx 

Your assumption is correct. We are trying to get the LOVs from the Crystal Report. I was not aware that this is not supported by Web Services SDK.We used Web Services SDK to integrated the Crystal Reports in our web application. We implemented some basic actions for reports: schedule, view instances, run ad-hoc reports.We encountered this problem when trying to run/schedule reports with dynamic parameters (a list of values from DB). We were unable to get the LOVs.Please let me know if you can think of an alternative to look at.Thanks a lot,Catalin

My ipod touch 2g a1288 wont restore. The download takes ages then ipod puts itself back in2 DISABLED mode, HELP!!

Ok so my ipod is making me really angry. If I don't figure this thing out today after trying for so long I think I'm going to take my car and repeatedly run the thing over until its in a million pieces.
Right now heres the long story which ill try keep kinda short but I do need to explain whats happened thus far
Ipod touch (2G), Mondel: A1288 which has gone into disabled mode and is basically useless at the moment.
Now I've done the thing where you hold the two buttons while plugged into laptop until itunes detects ipod in recovery mode. Then I try to hit restore, this starts up the download/ update thing which will not download because here in the dark ages of New Zealand our internet is slow. So because its so slow the ipod touch takes itself back into disabled mode! ahhhhhhhhhhhhh so FRUSTRATING
Now I'm aware that I can pre-download the firmware (which will still probably take ages but may save the ipod from timing out and going back into disabled screen) and then just hit control and select it when ipod is detected in recovery mode by itunes. The only thing wrong with doing this however, is when I go to the site to get the firmware from http://http://www.felixbruns.de/iPod/firmware/ and look in the drop down menu of 2G ipod touches, I don't see my model listed there so I'm wondering what firmware I can download for the A1288? Is it compatible with a different version? because it wasn't even listed in the drop-down menu of ipod touches.
I just wan't the thing going again! they put these things into technology that make it useless because they know the average joe like me will just give up trying to fix it and buy a new one. Well not this time, if I cant fix this, I'm going to run the thing over and that will be that!
Many thanks for reading my speal, I hope somebody can help

lol yea when i inserted the link i just copied and pasted thats why that happend... Lets try again... http://www.felixbruns.de/iPod/firmware/
Anyways when I go to it theres a drop-down list and you select the one you want and I know the number next to it identifies the model but the thing is they don't have my model listed so my main question is, what version eg. 2.1.1. or 2.2.1 etc. etc. etc. etc. will work with my model of ipod touch which is the 2g Model A1288?
Does anybody know? Does it work with any firmware thats for 2G ipod touches or do i have to get firmware thats model specific?

Dynamic Parameter takes ages

Similar Messages

Maybe you are looking for