Dynamic process call in Oracle BPM 11g

Hi All,
I worked on oracle BPM 10g and in that we can decide the target process based on a parameter (targetprocessname) in subflow / process creation by creating a interface.
simillaly do we have any way by which we can decide child process in runtime?
For example: I have 3 process (1 main - A and 2 child process - B and C ), Main process can call anyone of child process based on one parameter. i.e., if a parameter value X>10 then it should call process B else process C 
Thanks in advance

Automatic activities no longer exist.
To make process/project variable assignments you use a Script activity to make simple or XPath expression based value assignments.
You can also make assignments based on a XSL transformation. This is useful in cases where you're calling a service and the inputs/outputs don't quite match what you have defined in your business objects in the BPMN process.
For conditional assignments ("if A then B, else C") you would typically use a Business Rule activity.
I'm not aware of a way to output debugging log messages or set breakpoints directly in a BPMN process in 11g. You can however use a file adapter at the composite.xml level and call that as a service in your BPMN process to write out data values to the filesystem for debugging - although this approach is kludgy at best.

Similar Messages

  • Exposing a process as web service on Oracle BPM 11g

    Hi!
    Does somebody know how can I expose a process as a web service on Oracle BPM 11g? How does it works?
    In the version 10.3, when we exposed a process as web service it always had 3 default methods: startSession, getInstanceStatus and discardSession, is it the same in the 11g version?
    Where can I found some info about it? Any tutorial?
    Thanks a lot!
    Ana

    Typically you would use a Message Start event to start the process in conjunction with a Message End event. This will allow your process to be called as an asynchronous web service.
    In the "Implementation" section for the start event, you specify the input parameters. You can specify "Define Interface" to directly define the interface, or use an existing interface from the BPM Catalog (the From Catalog option).
    For further details on the different event types and their use cases, refer to the modeling and implementation guide:
    http://download.oracle.com/docs/cd/E14571_01/doc.1111/e15176/toc.htm
    You can test the web service and examine the WSDL and endpoints by using FMW control (Enterprise Manager). In the menu on the left hand side: expand SOA -> SOA-Infra -> <Partition Name> -> Composite Name, then click the "Test" button at the top.

  • Mapping LDAP Role in Building Your First Process with Oracle BPM 11g

    I'm working on "Building Your First Process with Oracle BPM 11g" I'm at the end of step where assigns user for the requester. The problem is in identity lookup, "Realm" is empty for Remote_WLServer.
    Servers are up and running. Demo user community has been loaded - I can see the list of users and groups in the administration server under myrealm. We haven't done much since SOA suite 11g installation. I'm probably the first one who uses this. I wonder we have a missing set up? Can you me what's missing? Appreciate your help in advance.

    I get this error message when I clicked gear icon.
    "Server exception is : Connection refused from server"
    Here is the result of testing Remove_WLServer connection. Does this cause the issue?
    Testing JSR-160 Runtime ... failed.
    Cannot establish connection.
    Testing JSR-160 DomainRuntime ... skipped.
    Testing JSR-88 ... skipped.
    Testing JSR-88-LOCAL ... skipped.
    Testing JNDI ... skipped.
    Testing JSR-160 Edit ... skipped.
    Testing HTTP ... success.
    Testing Server MBeans Model ... skipped.
    Testing HTTP Authentication ... success.
    2 of 9 tests successful.
    I have installed JDeveloper 9i, 10g, and 11g in my laptop. SOA is installed on linux.

  • Rules of thumb for sizing an Oracle BPM 11g deployment

    Anyone out there have some rules of thumb they are using to size out an environment for Oracle BPM 11g? I know processing power can vary widely for process complexity and amount of data floating around. Still, I get asked questions like how much processing power do I need for this solution? I have a current client looking at 2500+ potential human workflow users with 1000 concurrent at peak load. Short of running some performance test myself and extrapolating numbers I am at a loss. Hoping some others can chime in with some thoughts.

    an update... my rule of thumb for 50 users has proven to be a bit high. Looks to be 30-40 per core when you split out the BPMN engine from other computing intensive processes such as the ESB. Without splitting up overall SOA/BPM functionality over multiple servers concurrent user counts of various technology really takes a hit.

  • Import Oracle BPA model (EPC) to Oracle BPM 11G

    Hi,
    I have my business process modeled using Oracle BPA product (EPC format). Now I need to import this model into Oracle BPM 11G which uses BPMN 2.0 format. Does any of the softwares provide a way to transform EPC models to BPMN 2.0 format.
    These are the some of the approaches that I tried to perform the conversion:
    1. Use share blueprint option for EPC model
    Issue with this approach: The model imorted in jdeveloper is not BPMN 2.0 format, It is .xpdl file
    2. Installed tutor macros on Oracle BPA, however this macro is enabled only for BPMN 2.0 process models, not for collobration models. Recreating the entire model as BPMN 2.0 Process model (I don't prefer this approach since this include manual conversion of the models from EPC) also does not work.
    Issue with this approach: After importing model in OBPM is all activities appear as human task, new human task is created for start and stop activities along with start and stop events.
    3. Use share blueprint option in Oracle BPA, this works only for BPMN 1.0 formats.
    Issue with this approach: The SOA -> share blueprint option is not enabled for BPMN 2.0 type models
    Ideal solution for me would be if there is a way to import the models created in EPC format into oracle BPM 11g without recreating the models manually. Can anyone help me with this?

    Hi,
    Actually it's tool couldn't help you resolve your tasks.
    It hasn't options "share blueprint" for BPMN 2.0 type models.
    And I don't know software which can transform EPC model to BPMN 2.0 model...

  • Oracle BPM 11g

    Hi All,
    I am using Jdeveloper 11g Rel 1. (11.1.1.6.0) with BPM Studio for Implementing Sales Application.
    1) Application File = SalesQuoteLab.jws.
    2) Project File = QuoteProcessLab.jpr
    3) Process File = RequestQuoteLab.bpmn
    I have completed the All the Roles (Sales Rep, Approvers and Contracts) with complete flow.
    In the Business Practices Role (Swim Lane -
    a) I created a Exclusive Gateway Named as (Is Business Practices Review Required ?)
    b) which has sequence flow (Yes) to Human Task Named (Business Practices Review)
    c) I created a new Exclusive Gateway named as (Business Practices Outcome) This Gateway has
    i) Outgoing condition flow (Business Practices Rejected) to Human Task (Enter Quote Details) in Sales Rep. Role.
    ii) Outgoing Unconditional flow (Business Practices Approved) to Parallel Gateway (Approvals ) in Approvers Role.
    Here the Point is :
    When I am Trying to do this step
    "Drag the outgoing sequence flow from Business Practices Review to Business
    Practices Outcome gateway" (Exclusive Gateway)
    I am not able to draw the outgoing sequence flow from Human Task (Business Practices Review) to Business
    Practices Outcome gateway. It denies even when I am clicking the Artifacts --> Sequence Flow Icon from Component Pallete
    or from the tool bars icons - Artifacts --> Sequence Flow.
    Due to this in my second Phase of Simulation Activity, (have completed all the simulation pre-requisites) When I start the Simulation I am getting the following error.
    "Node 'Business Practices Review' does not have any incoming Sequence Flows"
    Please correct me how do I do this step.
    "Drag the outgoing sequence flow from Business Practices Review to Business
    Practices Outcome gateway" (Exclusive Gateway)
    For this I have referred many guides and Tutorial, but none could provide the solution.
    Please response ASAP, awaiting your timely and valuable solution. to the post or to my id : [email protected]
    Thanks and Regards
    Ajaz Ahmed
    Oracle Corporate Trainer / Consultant
    Mumbai - India

    For the Oracle BPM 11g documentation go to http://download.oracle.com/docs/cd/E14571_01/soa.htm for the documentation (look at the "Oracle Business Process Management Suite" section).
    10g and 11g Oracle BPM are vastly different. A couple key differences:
    - 10g runs on Ecllipse and 11g runs on JDeveloper
    - 11g has full access to the SOA Suite adapters natively using SCA
    Dan

  • Availability based routing in Oracle BPM 11g

    Hi
    Does Oracle BPM 11g support availability based routing enabling equal distribution of work? If so can someone guide me on how to do it?
    Regards
    Venkat

    Also see this http://docs.oracle.com/cd/E15586_01/integration.1111/e10224/bp_worklist.htm#CHDBBIIC
    Group rules do the following actions:
    Assign to member via—You can specify a criterion to determine which member of the group gets the assignment. This dynamic assignment criterion can include round-robin assignment, assignment to the least busy group member, or assignment to the most productive group member. You can also add your custom functions for allocating tasks to users in a group.

  • Simulation in ORacle BPM 11g

    Do we need the weblogic server to be up and running for running the process in simulation mode in Oracle BPM 11g?
    I have created a process using JDeveloper and trying to run using simulations.The execute buttonm is disabled in simulations view.
    So do we need the weblogic server to run process simulation in 11g ?

    It should work without the WLS. Did you create a Simulation Model and Definition?

  • Supporting PAPI in Oracle BPM 11g ?

    Hi All,
    For Oracle BPM 11g , Is "PAPI" still support for Oracle BPM 11g ?
    Furthermore, Is there any Hand-on Tutorials for Oracle BPM 11g ?
    Many Thanks in Advance...
    Pearapon S.

    I think with 11g, the starting point for dealing with a Process* should be the Composite [http://download.oracle.com/docs/cd/E14571_01/apirefs.1111/e10659/oracle/soa/management/facade/Composite.html] .
    From Composite::getComponents() you should be able to get handle(s) to the process(es) deployed in the composite.
    *IMHO, in most common usecases you really need to just interact with the human workflow services referred to earlier in this thread.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Self training on Oracle BPM 11g

    Hi All,
    I want to learn Oracle BPM 11g, can some one provide me hands on documents please .
    Reagards,
    Rohan.
    Edited by: user10956358 on Mar 26, 2012 3:09 PM

    user10956358 wrote:
    Hi All,
    I want to learn Oracle BPM 11g, can some one provide me hands on documents please .
    Reagards,
    Ramesh.Check this http://www.oracle.com/technetwork/middleware/bpm/documentation/index.html
    You have dedicated fourm for BPM here is link below and path Forum Home » SOA & Process Management » Business Process Management Suite
    Business Process Management Suite
    Pleas close thread here
    Edited by: CKPT on Feb 21, 2012 7:04 AM

  • Oracle BPM 11g Grab Instace

    Hello BPM Experts,
    Is there any way to grab and abort/reassign the instances in oracle bpm 11g.
    -Srinivas

    In order to grab an instance (or "Alter Flow" as it is known in 11g) keep in mind that the logged in user has to be assigned to the Process Owner role for the project.
    An individual can claim an instance in the Workspace so that only that person can see and work on it. End users can escalate work in their queue specifically to their manager and only their manager. Managers can delegate work in their queue to subordinates. By delegating, they provide the end user the same permissions to edit and approve the task assigned that the manager has. Reassigning work is similar to delegating but it is a way that someone can give the task to someone else who is not necessarily their subordinate. Take a look at the Workspace documentation (http://docs.oracle.com/cd/E21764_01/user.1111/e15175/toc.htm) to get more details on this.

  • How to localize HumanTask names and process names of oracle BPM process ?

    Anybody known how to localize HumanTask names and process names of oracle BPM process ?

    Oracle Apex is an API, if that helps you understand / visualize. You do not start Apex process nor stop it.
    When an Apex session starts it starts calling the API.
    You can however start / stop the listener. It may be OHS, ApexListener and the J2EE container running it, OC4J or any other "server" that you are using.
    The built-in EPG is something like an API again, you cannot start / stop it but you can disable/enable it with DBMS_XDB.SETHTTPPORT API.
    Regards,

  • Calling From Oracle Forms 11g patch set 2(11.1.1.3.0) to  Oracle Reports 1

    Hi
    While calling From Oracle Forms 11g patch set 2(11.1.1.3.0) to Oracle Reports 11g patch set 2(11.1.1.3.0) I found unable to run report error
    But its finely working in 10g. The Place of error is in find_report_object
    Is any solution to resolve this problem like any registry setting or patches to solve this problem
    Please guide me
    Regards
    Murali N S

    I was able to download it from this link:
    [http://download-llnw.oracle.com/otn/java/jdeveloper/11.1.1.3.0/jdevstudio11113install.exe]
    on the general 11g Fusion download page at:
    [http://www.oracle.com/technology/software/products/middleware/index.html]
    Although the site does appear to be having problems. I got intermittent errors of the page/server not being available.

  • JSP Integration with Oracle BPM 11g

    Hi,
    Could you let me know, How to Integrate JSP with Oracle BPM 11g.
    Thanks

    Thanks for the information.
    But i was looking at how to integrate JSP with oracle bpm 11g.
    IN Oracle BPM 10gR3, We will integrate jsp in screenflow. In 11g, I am not sure how will we integrate JSP.
    Could you please let me know how to integrate JSP with BPM 11g. Thanks!.

  • Parametric roles in Oracle BPM 11g

    Hi all!,
    For all of us that was asking how to do the parametric roles in Oracle BPM 11g, here´s how to do it, hope it helps.
    Regards!!
    Z3uV4k
    https://docs.google.com/file/d/0B7YrnfO7h717M2U1MTlmMmEtZjI3Mi00ZTNhLWFhNTQtYzkyZjc5OGI5Y2I4/edit?pli=1

    Might also want to look at a blog post I wrote based on an idea Arun Pareek came up with.  (click here)
    The differences are (1) that this lets you assign parametric roles to groups or application roles instead of individual users making them simpler to maintain and (2) IMO it's a lot easier to do using this technique.
    Dan

Maybe you are looking for