Dynamic Report Execution

Dear All,
In the following i'm trying to call the report dynamically by triggering a subroutine, but the program is leading to execeptions saying that 'Program does not exist'. It is getting failed to call the report.
DATA: BEGIN OF TAB OCCURS 0,
        line(128),
      END OF TAB.
DATA: v_name like sy-repid.
tab-line = 'Report sy-repid.'.
append tab. clear tab.
tab-line = 'form f_crate_apps using v_where .'.
append tab. clear tab.
concatenate tab-line 'do something' into tab-line.
append tab. clear tab.
tab-line = 'endform.'.
append tab. clear tab.
TRY.
perform f_create_apps in program (v_name) using v_where.
Exception Catching.
   CATCH cx_root INTO o_field.
    text = o_field->get_text( ).
ENDTRY.
Pl. suggest the solution.
best regards
Mahesh

Hi Mahesh,
You are right for most part, but a few things are amiss,
try this code
data: v_name(30) type c value 'ZTEST',  "program name
v_err(120) type c,                   "error variable
v_name = 'ZTEST'.
tab-line = 'Report ZTEST.'.
append tab.
clear tab.
tab-line = 'form f_crate_apps using v_where type <some type> .'.
append tab.
clear tab.
concatenate tab-line 'do something' into tab-line.
append tab.
clear tab.
tab-line = 'endform.'.
append tab.
clear tab.
GENERATE SUBROUTINE POOL tab name v_name message v_err .
If sy-subrc eq 0.
PERFORM f_crate_apps in program (v_name) using v_where
    if found.    "<----- this statement catches errors in the perform
    write:/ gv_err .
    clear gv_err.
else.
write :/ v_err.  <-- this statment shows errors in compilation
endif.
Regards,
Samson Rodrigues.

Similar Messages

  • Discrepancy in report execution duration

    Hello,
    Everyday we are executing audit reports which tells us report execution time for all our daily scheduled reports. Here we have observed some discrepancy between the time shown in the instance history verses auditing report's data. For example, if XYZ report took 120 seconds to execute, our auditing report shows 110 seconds only (-10 sec difference); however instance status in report history shows 120 sec only.
    Here are environment details:
    Product: SAP BI 4.0 SP6 Patch 6
    Server OS: Windows Server 2008 R2
    CMS DB: Oracle 11g R2
    Auditing DB: Oracle 11g R2
    We would like to know why there is a difference? Please advise!
    Regards,
    Daya Jha

    Issue resolved after doing multiple activity.
    - Adding 2 new cluster in PRD environment, After refering Server sizing Guide from SAP
    - Adding 4 new Web Intelligence Processing Server in PRD environment
    - Assign Static port in all 4 Nodes, Previously it was Dynamic Ports
    - Proper spiliting of APS as per SAP APS Sliting KBA (1792286 ,1694041)
    - Change Maximum Connection Paremeter in Web Intelligence Processing Server, Because we have more Web Intelligence Business user to view the Web Intelligence reports.By Default SAP provided 50 Connections.
    - Change in Tomcat Parameters like
    Parameter                Old Value      New Value
    XX:MaxPermSize      384 M          512 M
    Maximum Memory     2,048           4,096
    maxThreads              200              900
    Thanks,
    Daya

  • How can i create an dynamic report in Java

    hello everybody,
    I want to make dynamic reports in Java. Report contain data and images with good layout.. such as crystal reports presentation..
    Reports fields decided at run time or we can say that it is generated according to user requirement...
    can it is possible in Java. If it is then which tool is better for it..
    please suggest me.. this is very urgent requirement for me...

    i don't know what types of tools are avaiable in market... Tools for what? You still didn't tell us what exactly you want to do.
    i just imagin that
    "An user create a database dynamically on server
    databaseNobody "dynamically creates a database".
    and he decide reports desgin according to
    his requirement..... we provide an control for this
    type possibilities....."
    so this is question is build in my mind.. so i
    forward this question to this forums..
    I am just going to check the physibility of my mind
    imagination...Feasibility you mean. IMHO, the feasibility of creating that stuff yourself is very low. Reinventing the wheel usually doesn't make it better, and it's likely to be more expensive to pay you for creating an inferior solution (not because of lack of skills, but simply because the available products had a few years time to grow, feature-wise) than to simply buy the licenses. Look at Crystal Reports or JFreeChart or Jasper Reports. Or use Google to look up J2EE-based reporting libraries. There might be more.
    Which of these is best, I don't know, I never used any of those. Also, the definition of "best" changes with the requirements. What's better, a Ferrari or a truck?

  • Dynamic reporting in Crystal Reports XI

    Hi,
    Need to know about dynamic reporting feature using Crystal Reports XI.
    Is Business View helpful for dynamic reporting?
    Any link to get some material on dynamic reporting/ business views?
    appricate your comments.
    Thanks,
    Cherry

    In the SAP Service Marketplace, go to http://help.sap.com .  Under the Business Objects tab you can select Business Objects Enterprise, and in there is a Business Views Administrator Guide.  That should provide you all of the basic information on Business Views, how they work and how to use them.
    Business Views can be helpful to you depending on what you are looking to do with your data.

  • Financial Reporting making of Dynamic Reports v 11.1.1.2

    Hi,
    I have recently going through designing of a dynamic report in Financial Reporting which consists of financial representation as follows:
    There are some data which is there in the Schedules of accounts.
    Now the user wants to a make a drill down of all the account codes there in the schedule like
    schedule 13 other income.
    All the account codes in Schedule should bw drill down which I am able to make.
    Now for each account codes they want a sorting in descending order to find out which entity is contributing to how much revenue for the oraganistion or
    similarly for the cost which are in other schedules like 14,15,16 tc.
    After that they want a insertion of cell text function for each cell having a combination of account codes and entity which is having a adverse variance and analsis
    for the same.
    If someone can throw a light on this about how to do this.

    I think you have already posted this problem on another post, I said it is possible it could be a ports issue.
    Have a look at the following http://www.oracle.com/technetwork/middleware/bi-foundation/epm-component-communications-11121-354680.xls
    Select FR studio as the client and it should give indication to the ports that need to be opened.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Reporting Services R2 log entries have stopped generating on report execution.

    Hi -
    I have a new instance of a reporting server and the log files have quit generating on report execution. 
    When the services restart this is the log file:
    rshost!rshost!8e8!01/22/2014-17:08:33:: i INFO: CLR runtime is initialized.
    rshost!rshost!8e8!01/22/2014-17:08:33:: i INFO: Derived memory configuration based on physical memory as 3931704 KB
    rshost!rshost!8e8!01/22/2014-17:08:33:: w WARN: Failed to initialize performance counters: ffffffff. Possible setup issue.
    rshost!rshost!8e8!01/22/2014-17:08:33:: e ERROR: Failed to start service, error=1063.
    We have logging turned on on the server.  Report Server Mode is Native.  Dont see anything in the application log about failed service.
    Any ideas?

    Hi dwrco,
    Have you recently install any update such as MS12-070 (KB2716440)? If so, it is a known issue for some patches for SQL Server. The reason is as follows:
    When a .NET application starts up, the .NET Framework tries to check if the Microsoft assemblies are right and have not been modified, this is done through connecting to a server that has a revocation list in internet. When the framework tries to connect
    to the server to check if it has access to internet with an elevated timeout, this makes that any other .NET application that has less timeout setting fails (such as SSIS or SSRS) with timeout error.
    For example, the error message "The request failed or the service did not respond in a timely fashion." means that the SSRS timeout is lower than the timeout of the connection to the revoke list server established by .NET Framework.
    To work around the issue, we usually use two approaches:
    Increase the value of ServicesPipeTimeout registry key of Reporting Services
    Disable generatePublisherEvidence element of ReportingServicesService.exe.config file
    For the detailed steps, please see:
    http://blogs.msdn.com/b/mariae/archive/2012/11/12/reporting-services-service-doesn-t-start-after-the-installation-of-ms12-070-security-patch.aspx 
    Regards,
    Mike Yin
    If you have any feedback on our support, please click
    here
    Mike Yin
    TechNet Community Support

  • How to use both Static and dynamic Reports in WAD using a single template.

    Hi,
    I have 2 reports - Report1 & Report2. Report1 is a static report with 3 column in it. In WAD user does not want to see the third series in the chart so I have made series3 invisible in the chart.
    I am calling the Report2 via 'SET_DATA_PROVIDER_PARAMETERS' in the button option.
    Now the issue is that, Report2 is a dynamic report which is using a calyear vaiable range. As Report2 is using the template of Report1, Series3 of Report2 also gets hidden.
    Any solution for this?
    Thanks
    Nisha

    Hi Nisha,
    After setting the Report 2 DP thru SET_DATA_PROVIDER_PARAMETERS, you can use one more command SET_ITEM_PARAMETERS on the Chart webitem & edit the Series to make it visible. If there is a way to reset the DP back to Report 1, then you must once again use SET_ITEM_PARAMETERS to hide the Series.
    Or you can use another Chart webitem for Report 2 DP & make the Chart webitem for Report 1 hidden & the Chart webitem for Report 2 visible using SET_ITEM_PARAMETERS after setting Report 2 DP using SET_DATA_PROVIDER_PARAMETERS.
    --Priya

  • Store z-table (during an report execution) in a BW system

    Is there a way (and how- an example) to store z-table (during an report execution) in a BW system. We would not like Ztables to reside in R/3
    Thank you in advance

    Is there a way (and how- an example) to store z-table (during an report execution) in a BW system. We would not like Ztables to reside in R/3
    Thank you in advance

  • Dynamic Reports in java application

    Hi,
    I want to create dynamic reports in an java standalone application, I have downloaded the Jfreereport <http://sourceforge.net/projects/jfreereport>
    I'm not sure, whether it could get data from a JDBC source. (or is there anyother solution to generate dynamic reports in a java application?).
    Thanks in advance,
    Payam

    I generate reports from a webserver ( Tomcat ) in PDF using iText ( www.lowagie.com/iText ). It works great. JFreereport is also using this iText and you shouldn't have any problems using JDBC. Try to read the tutorial first about iText first. This will give you an idea how JFreereport works.
    - Dieter

  • Javascript popup in dynamic report

    Hello,
    I want to be able to use Javascript popup window from a dynamic report in Apex 4.0. Is there anything built-in to help me out? Or should I use my own javascript function in the header and call it?
    My idea would be that one column would have a icon with a link that calls a javascript function to popup a window.
    Any suggestions?
    Thanks all
    Btw, what is the markup for scripts, again?

    Try:
    javascript:popupUR

  • Oracle Apps - How to create a table before report execution?

    Hi,
    I'm new to oracle apps, I created a procedure to get some values for a report and created a query to get the remaining values. Now I need to populate those values into a temporary table and after the report execution I have to delete the table. In apps there is no before parameter form. If any one can help me, that will great.
    Thanks in advance.

    Hi,
    Do you really need to create a table INSIDE the report? It doesn't look like a good idea to me. For instance, what happens if 2 users try to execute the report at the same time? I would create a global temporary table before any execution of the report, and then I would just populate the data in the table in the 'Before Report' trigger. The data in a global temporary table is only visible at session level, so you wouldn't have any problems with multiple users executing the report at the same time and the data disappears once you finish your session, so you don't need to take care of deleting the data.
    Hope it helps.

  • Dynamic report output in a webdynpro alv

    Hi,
    I have created a dynamic report in the R/3 system . In this report, i am creating a report program within the report and subsequently executing this dynamically created report and displaying in the ALV..
    Is it possible to handle such a scenario in a webdynpro ALV. One option is to use ITS and display the report in the portal but is there some other way so that i can directly view this report in an alv grid in a view.
    all help appreciated!!
    regards,
    Priyank

    Hi Priyank,
    This could be one of the solution:
    1] Run the report in background mode (using submit statement, dn't forget to give printer as LOCL), get the spool id programatically. Use the FM's CONVERT_OTFSPOOLJOB_2_PDF or CONVERT_ABAPSPOOLJOB_2_PDF.
    Which returns the ouput of table tline, convert this to xtring and bind it to xtring attribute.
    In view add a interactive form and bind the xstring attribute to the Interactive form.
    By following the above steps, we can display the result in the PDF in WD ABAP.
    2] The report result is ALV and in most of the cases we generally do not have function modules or any other easy way to get the output.
    In such cases the best approach which we follow is, to run this in background mode and generate the spool and display the ouput in PDF.
    3] But if intertactive form is not present in your requirement then we need to debug the logic of the report (if no FM or class present) and get the results and display it in the View.
    You can create a service which takes the parameters of the report, submits it and
    transfers the result to HTML. In a view you use an IFRame which takes the URL of the service and shows the result HTML.
    just additionally read this thread,
    Display simple ABAPLIST
    Here an IFrame is used to display HTML output of report. But as IFRame gets obsolete the Suresh's solution seems to be pretty cool.
    Hope this will help you!
    Cheers,
    Darshna.

  • Report execution time should displayed in Local Time

    Hi,
    I have a query related to the Report execution time.
    Our SAP Servers are available in US.  The Servers are configured in US Time.
    We have developed a Z report and used SY-UZEIT to display the Report Run Time.
    we also have a plant in India.
    When we execute this report for India Plant we are getting the execution run time for US.
    But we need to get the run time in India Time.
    Please help ASAP.
    Regards,
    Shankar

    Hi Shankaran,
    In your Z report, give a condition to check if the Plant is in India. If it is in india, then get SY-UZEIT and add the time difference to get IST.
    Display this time on your report.
    For implementing this, you will have to convert the Date and Time into Timestamp (use FM "LXHME_TIMESTAMP_CONVERT_INTO"), add the Time to this Time stamp (use FM "TIMESTAMP_DURATION_ADD" and convert it back to Date and Time (use FM "LXHME_TIMESTAMP_CONVERT_FROM"). 
    Reward points if useful.
    regards,
    Raj
    Message was edited by: Rajagopal G

  • Report Execution time in NQQuery.log should be display in Milliseconds

    Report Execution time in NQQuery.log should be display in Milliseconds.
    For Example :
    --- Logical Query Summary Stats: Elapsed time 0, Response time 0, Compilation time 0 (seconds)
    Can we see the logical Query Summary Stats in milliseconds?
    If so Where should i cofigure to populate this.

    No. If you query comes in less that 1 second then you got nothing to worry about. I haven't seen a single DWH where users would worry about queries returning in milliseconds.

  • Create dynamic report or query for piece count

    Hi abaper's
    This is a very straight forward requirement. so please give me code
    First you have to get the corresponding plant from table T320 for the given warehouse numbers in the selection screen. 
    1.     Get the sum of order qty of sales orders from the sales order tables      for the given warehouse(Plant), distribution channel and the give date      range.
    2.     Get the confirmed transfer orders qty from the TO master table where      TO confirmation date is in the given date range and WH number.
    3.     Get the total PGIed qty from the delivery master table where PGI'ed      date in the given date range, shipping point is in the corresponding      plant of the WH and for the given distribution channel.
    As you are going to use the major tables please try to write the select commands effectively to avoid further performance issues.

    How to improve the performance fo this code.....this very urgent.
    & Issue Number          : 22199                                    &
    & Programmer            : Anjaneyulu.Pabba                         &
    & Transport Number      : D01K962471                               &
    & Date of Creation      : 19/03/2008                               &
    & Description           : Dynamic report or query for piece count  &
    & Requested By          : Parvati.Polisetty                        &
    REPORT  ZR_SD_PIECE_COUNT_ALV no standard page heading
                                  line-size 255
                                  line-count 65.
                          TABLES DECLARATION
    *TABLES: T320,   "Assignment IM Storage Location to WM Warehouse Number
          VBAK,   "Sales Document: Header Data
          VBAP,   "Sales Document: Item Data
          TVKOV,  "Org. Unit: Distribution Channels per Sales Organization
          LTAK,   "WM transfer order header
          LTAP,   "Transfer order item
          LIKP,   "SD Document: Delivery Header Data
          LIPS.   "SD document: Delivery: Item data
                          TYPE-POOLS DECLARATION
    TYPE-POOLS: SLIS .
         Internal Table Declaration
    DATA : BEGIN OF TY_T320,
            WERKS TYPE WERKS_D,
            LGNUM TYPE LGNUM,
           END OF TY_T320.
    DATA : BEGIN OF TY_VBAK,
            VBELN  TYPE VBELN_VA,
            VTWEG  TYPE VTWEG,
            WERKS  TYPE WERKS_D,
            KWMENG TYPE KWMENG,
            VSTEL  TYPE VSTEL,
           END OF TY_VBAK.
    DATA : BEGIN OF TY_LTAK,
            LGNUM TYPE LGNUM,
            TANUM TYPE TANUM,
            VISTA TYPE LTAP_VISTA,
           END OF TY_LTAK.
    DATA : BEGIN OF TY_LIKP,
            VBELN TYPE VBELN_VL,
            WERKS TYPE WERKS_D,
            LFIMG TYPE LFIMG,
           END OF TY_LIKP.
    DATA : BEGIN OF TY_ITAB ,
    LGNUM  TYPE LGNUM,    "Warehouse Number / Warehouse Complex
    WERKS  TYPE WERKS_D,  "Plant
    VBELN  TYPE VBELN_VA, "Sales Document
    VTWEG  TYPE VTWEG,   "Distribution Channel
    KWMENG TYPE KWMENG,  "Cumulative order quantity in sales units
    TANUM  TYPE TANUM ,     "Transfer Order Number
    VISTA  TYPE LTAP_VISTA, "Source actual quantity in alternative
                                                 unit of measure
    LFIMG  TYPE LFIMG,  "Actual quantity delivered (in sales units)
    END OF TY_ITAB .
    DATA: T_T320 LIKE STANDARD TABLE OF TY_T320 INITIAL SIZE 0 WITH HEADER
                                                                   LINE,
          T_VBAK LIKE STANDARD TABLE OF TY_VBAK INITIAL SIZE 0 .
    DATA: T_LTAK LIKE STANDARD TABLE OF TY_LTAK INITIAL SIZE 0 WITH HEADER
                                                                    LINE.
    DATA :T_LIKP LIKE STANDARD TABLE OF TY_LIKP INITIAL SIZE 0 WITH HEADER
                                                                    LINE.
    DATA:T_ITAB LIKE STANDARD TABLE OF TY_ITAB INITIAL SIZE 0 WITH HEADER
                                                                   LINE .
    *&      Fieldcatalog Declaration
    DATA : T_FCAT TYPE SLIS_T_FIELDCAT_ALV,
           W_FCAT TYPE SLIS_FIELDCAT_ALV.
    DATA : W_LAYOUT TYPE SLIS_LAYOUT_ALV.
    ********Global Data Declaration***
    DATA :G_REPID        LIKE SY-REPID,
         G_EXIT(1)      TYPE C,
         GX_VARIANT     LIKE DISVARIANT,
         X_SAVE,                          "for Parameter I_SAVE
         GS_VARIANT TYPE DISVARIANT.      "for parameter IS_VARIANT
    data: g_lgnum type t320-lgnum,
          g_vtweg type vbak-vtweg,
          g_erdat type vbak-erdat.
    *&      Selection-Screen
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
    SELECT-OPTIONS : S_LGNUM FOR  g_lgnum, "Warehouse Number
                    S_VTWEG FOR g_vtweg, "Distribution Channel
                    S_ERDAT FOR g_erdat ."Date on which the record was
    **********"created
    SELECTION-SCREEN END OF BLOCK B1 .
    SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
    PARAMETER: P_VARI LIKE DISVARIANT-VARIANT.  "Layout
    SELECTION-SCREEN END OF BLOCK B2.
    *&       INITIALIZATION EVENT
    INITIALIZATION.
      CLEAR GS_VARIANT.
    'gs_variant' must at least contain the report-id to allow
    saving a variant.
      G_REPID = SY-REPID.
    § 2.At least field REPORT of this structure has to be filled!
      GS_VARIANT-REPORT = G_REPID.
    § 3.Determine saving options.
      X_SAVE = 'A'.   "The user may save all types of variants
    *******Validating selection-screen values**********************
    getting F4 value for display variant field
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_VARI.
      PERFORM F4_FOR_VARIANT.
    ****validation of F4 value of display variant
    AT SELECTION-SCREEN.
      PERFORM PAI_OF_SELECTION_SCREEN.
    *&      Start-Of-Selection
    START-OF-SELECTION.
    *****Subroutine to  select Plant from T320
      PERFORM FIND_PLANT .
    *****Subroutine to select Order Quantity from VBAP
      PERFORM ORDER_QUANTITY .
    *****Subroutine to select Transfer Order Quantity from LTAK and LTAP
      PERFORM TRANSFER_ORDER_QUANTITY.
    *****Subroutine to select TDelivery Quantity from  LIKP and LIPS
      PERFORM DELIVERY_QUANTITY.
    *&      End-Of-Selection
    END-OF-SELECTION.
    *****Subroutine for Fieldcatalog
      PERFORM FIELDCATALOG .
    *****Subroutine for Final Output
      PERFORM DISPLAY_OUTPUT .
    *&     Subroutine Implementaion
    *&      Form  FIND_PLANT
          text
    -->  p1        text
    <--  p2        text
    FORM FIND_PLANT .
      SELECT  WERKS
              LGNUM
              FROM T320
              INTO  TABLE T_T320
              WHERE LGNUM IN S_LGNUM.
    ENDFORM.                    " FIND_PLANT
    *&      Form  order_quantity
          text
    -->  p1        text
    <--  p2        text
    FORM ORDER_QUANTITY .
      SELECT VK~VBELN
             VK~VTWEG
             VP~WERKS
             VP~KWMENG
             VP~VSTEL
             INTO TABLE T_VBAK FROM VBAK AS VK
             INNER JOIN  VBAP AS VP
             ON VKVBELN = VPVBELN
             FOR ALL ENTRIES IN T_T320
             WHERE VK~VTWEG IN S_VTWEG
             AND   VK~ERDAT IN S_ERDAT
             AND   VP~WERKS = T_T320-WERKS.
    ENDFORM.                    " order_quantity
    *&      Form  Transfer_order_quantity
          text
    -->  p1        text
    <--  p2        text
    FORM TRANSFER_ORDER_QUANTITY .
      SELECT LK~LGNUM
             LK~TANUM
             LP~VISTA
             INTO TABLE T_LTAK FROM LTAK AS LK
             INNER JOIN LTAP AS LP
             ON LKLGNUM = LPLGNUM
             WHERE LK~KQUIT = 'X'
             AND   LK~BDATU IN S_ERDAT
             AND   LK~LGNUM IN S_LGNUM.
    ENDFORM.                    " Transfer_order_quantity
    *&      Form  Delivery_QUANTITY
          text
    -->  p1        text
    <--  p2        text
    FORM DELIVERY_QUANTITY .
      SELECT  VBELN WERKS LFIMG FROM LIPS
              INTO TABLE T_LIKP
              FOR ALL ENTRIES IN T_T320
              WHERE WERKS = T_T320-WERKS
              AND ERDAT IN S_ERDAT
              AND VTWEG IN S_VTWEG.
    ENDFORM.                    " Delivery_QUANTITY
    *&      Form  fieldcatalog
          text
    -->  p1        text
    <--  p2        text
    FORM FIELDCATALOG .
      W_FCAT-COL_POS       = '1' .
      W_FCAT-FIELDNAME     = 'LGNUM' .
      W_FCAT-REF_TABNAME   = 'T320'.
      W_FCAT-REF_FIELDNAME = 'LGNUM' .
      APPEND W_FCAT TO T_FCAT.
      CLEAR W_FCAT.
      W_FCAT-COL_POS       = '2' .
      W_FCAT-FIELDNAME     = 'VTWEG' .
      W_FCAT-REF_TABNAME   = 'VBAK'.
      W_FCAT-REF_FIELDNAME = 'VTWEG' .
      APPEND W_FCAT TO T_FCAT.
      CLEAR W_FCAT.
      W_FCAT-COL_POS       = '3' .
      W_FCAT-FIELDNAME     = 'KWMENG' .
      W_FCAT-REF_TABNAME   = 'VBAP'.
      W_FCAT-REF_FIELDNAME = 'KWMENG' .
    *w_fcat-seltext_m     = '# of Orders'.
      APPEND W_FCAT TO T_FCAT.
      CLEAR W_FCAT.
      W_FCAT-COL_POS       = '4' .
      W_FCAT-FIELDNAME     = 'VISTA' .
      W_FCAT-REF_TABNAME   = 'LTAP'.
      W_FCAT-REF_FIELDNAME = 'VISTA' .
    *w_fcat-seltext_m     = '# of Pcs Picked'.
      APPEND W_FCAT TO T_FCAT.
      CLEAR W_FCAT.
      W_FCAT-COL_POS       = '5' .
      W_FCAT-FIELDNAME     = 'LFIMG' .
      W_FCAT-REF_TABNAME   = 'LIPS'.
      W_FCAT-REF_FIELDNAME = 'LFIMG' .
    *w_fcat-seltext_m     = '# of Pcs Shipped'.
      APPEND W_FCAT TO T_FCAT.
      CLEAR W_FCAT.
    W_FCAT-COL_POS       = '6' .
    W_FCAT-FIELDNAME     = 'TANUM' .
    W_FCAT-REF_TABNAME   = 'LTAK'.
    W_FCAT-REF_FIELDNAME = 'TANUM' .
    **w_fcat-seltext_m     = '# of Pcs Shipped'.
    APPEND W_FCAT TO T_FCAT.
    CLEAR W_FCAT.
    W_FCAT-COL_POS       = '7' .
    W_FCAT-FIELDNAME     = 'WERKS' .
    W_FCAT-REF_TABNAME   = 'T320'.
    W_FCAT-REF_FIELDNAME = 'WERKS' .
    **w_fcat-seltext_m     = '# of Pcs Shipped'.
    APPEND W_FCAT TO T_FCAT.
    CLEAR W_FCAT.
    ENDFORM.                    " fieldcatalog
    *&      Form  display_output
          text
    -->  p1        text
    <--  p2        text
    FORM DISPLAY_OUTPUT .
      LOOP AT T_T320 INTO TY_T320.
        TY_ITAB-WERKS = TY_T320-WERKS.
        TY_ITAB-LGNUM = TY_T320-LGNUM.
        READ TABLE T_VBAK INTO TY_VBAK WITH KEY WERKS = TY_T320-WERKS.
        IF SY-SUBRC = 0.
        TY_ITAB-VBELN  = TY_VBAK-VBELN.
        TY_ITAB-VTWEG  = TY_VBAK-VTWEG.
        TY_ITAB-KWMENG = TY_VBAK-KWMENG + ty_itab-kwmeng.
        ENDIF.
        READ TABLE T_LTAK INTO TY_LTAK WITH KEY LGNUM = TY_T320-LGNUM.
        IF SY-SUBRC = 0.
        TY_ITAB-TANUM = TY_LTAK-TANUM.
        TY_ITAB-VISTA = TY_LTAK-VISTA + ty_itab-vista.
        ENDIF.
        READ TABLE T_LIKP INTO TY_LIKP WITH KEY WERKS = TY_T320-WERKS.
        IF SY-SUBRC = 0.
        TY_ITAB-LFIMG = TY_LIKP-LFIMG + ty_itab-lfimg.
        ENDIF.
        APPEND TY_ITAB TO T_ITAB.
      ENDLOOP.
    Function Module for Displaying Final Output ********
      W_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          I_CALLBACK_PROGRAM = SY-CPROG
          IS_LAYOUT          = W_LAYOUT
          IT_FIELDCAT        = T_FCAT[]
        TABLES
          T_OUTTAB           = T_ITAB.
    ENDFORM.                    " display_output
    *&      Form  f4_for_variant
          text
    -->  p1        text
    <--  p2        text
    FORM F4_FOR_VARIANT .
      CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
        EXPORTING
          IS_VARIANT = GS_VARIANT
          I_SAVE     = X_SAVE
        IMPORTING
          E_EXIT     = G_EXIT
          ES_VARIANT = GX_VARIANT
        EXCEPTIONS
          NOT_FOUND  = 2.
      IF SY-SUBRC = 2.
        MESSAGE ID SY-MSGID TYPE 'S'      NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ELSE.
        IF G_EXIT = SPACE.
          P_VARI = GX_VARIANT-VARIANT.
        ENDIF.
      ENDIF.
    ENDFORM.                    " f4_for_variant
    *&      Form  pai_of_selection_screen
          text
    -->  p1        text
    <--  p2        text
    FORM PAI_OF_SELECTION_SCREEN .
      IF NOT P_VARI IS INITIAL.
        MOVE GS_VARIANT TO GX_VARIANT.
        MOVE P_VARI TO GX_VARIANT-VARIANT.
        CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
          EXPORTING
            I_SAVE     = X_SAVE
          CHANGING
            CS_VARIANT = GX_VARIANT.
        GS_VARIANT = GX_VARIANT.
      ELSE.
        PERFORM VARIANT_INIT.
      ENDIF.
    ENDFORM.                    " pai_of_selection_screen
    *&      Form  variant_init
          text
    -->  p1        text
    <--  p2        text
    FORM VARIANT_INIT .
      CLEAR GS_VARIANT.
      GS_VARIANT-REPORT = G_REPID.
    ENDFORM.                    " variant_init

Maybe you are looking for

  • Getting Error While trying to export Data in Table Mode

    Hi Guru's, My DB Version: 10.2.0.1.0 My OS Version: Windows Server 2003 During exporting Table data i am getting below error: Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production With the Partitioning, OLAP and Data Mi

  • Mail quit unexpectedly while using the MailUI plug-in.. Help!

    Process:         Mail [786] Path:            /Applications/Mail.app/Contents/MacOS/Mail Identifier:      com.apple.mail Version:         7.2 (1874) Build Info:      Mail-1874000000000000~1 Code Type:       X86-64 (Native) Parent Process:  launchd [18

  • What's the Difference in Conversions done with ACR vs. DNG Converter?

    As an experiment, on my PC workstation I just converted a set of 40 Canon CR2 files with both the free DNG Converter 6.5 and Camera Raw 6.5 (both 32 bit and 64 bit).  With Camera Raw, I dragged the files to Photoshop, then used the [Save Files] butto

  • File -- XI -- IDoc ( IDoc Status 56)

    Iam trying to post IDoc(cremas03) with File --> XI  --> Idoc Scenario. I got message processed successful in SXMB_MONI. However on ECC5.0(R/3) I got Idoc status 56. EDI: Partner profile inbound not available Message no. E0337 Diagnosis An inbound par

  • PLS-00394 - Using collections

    Oracle 9i I get the following error when I run the below stored procedure. PLS-00394: wrong number of values in the INTO list of FETCH statement. CREATE OR REPLACE procedure TEST_PROC is cnt number := 1; type my_record is record a varchar2(20), b num