Dynamic Report Heading - Classical report

Hi,
Could you please let me know how do I change the heading of a classical report based on the user selection on selection screen. I want to display the selection text that the user has selected in the selection screen as the heading for the report.
Timely help is highly appreciatable.
Thanks in advance.
Regards,
Farhana.

You will have to insert some WRITE instruction in the TOP-OF-PAGE. You may read the current selection via FM [RS_VARIANT_ADMIN_DATA|https://www.sdn.sap.com/irj/scn/advancedsearch?query=rs_variant_admin_data&cat=sdn_all] and print it using FM [PRINT_SELECTION|https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_all&query=print_selection&adv=false&sortby=cm_rnd_rankvalue]. (Look at this sample in Code Gallery [how to print selection screen data in report |https://wiki.sdn.sap.com/wiki/display/Snippets/howtoprintselectionscreendatain+report])
Regards

Similar Messages

Report Formatting with Dynamic Height Header/Footer

I need to generate a printable report (pdf if possible) with a:
1) Header - Dynamic Height based on recordset output
2) Body - Recordset output, may carry over to multiple pages
3) Footer - Dynamic Height based on recordset out
In short, the whole page is dynamic- The header and footer need to be on every page and whatever height is left over to fit within the print area goes to the body and the line item output of each record (think invoice). Then the number of pages will depend on how long it takes to output the body recordset (but the header and footer MUST be on each page).
I have been trying to get this to work using cfdocument since CF7 and have never had any luck. It has not worked due to the reason that since the header and footer are dynamic height, I do not have any way to set the margins properly on page generation (so it shrinks the header or leaves excess whitespace).
Anyone recommend the best way to go about this? I have heard about the report builder and am not sure if that will fit these requirements. I appreciate any assistance!

When the footer goes to the 2nd page the page subform is incremented so you will have to reference the page subform as well. I suggest that you add a button (this is for a test only) to the footer subform and add the code app.alert(this.somExpression). Now render the form and make sure the footer stays on one page. Hit the button and take note of the someExpression. Now add enough rows to force the footer to a new page. Hit th ebutton again and take note of the changed somExpression. So to solve your problem you will have to find out which page your footer is on. and then construct your expression to incorporate this chane in expression. Note that the indexes are 0 based but the page numbering is 1 based.
Hope that helps
Paul

Javascript popup in dynamic report

Hello,
I want to be able to use Javascript popup window from a dynamic report in Apex 4.0. Is there anything built-in to help me out? Or should I use my own javascript function in the header and call it?
My idea would be that one column would have a icon with a link that calls a javascript function to popup a window.
Any suggestions?
Thanks all
Btw, what is the markup for scripts, again?

Try:
javascript:popupUR

Create dynamic report or query for piece count

Hi abaper's
This is a very straight forward requirement. so please give me code
First you have to get the corresponding plant from table T320 for the given warehouse numbers in the selection screen.
1.     Get the sum of order qty of sales orders from the sales order tables      for the given warehouse(Plant), distribution channel and the give date      range.
2.     Get the confirmed transfer orders qty from the TO master table where      TO confirmation date is in the given date range and WH number.
3.     Get the total PGIed qty from the delivery master table where PGI'ed      date in the given date range, shipping point is in the corresponding      plant of the WH and for the given distribution channel.
As you are going to use the major tables please try to write the select commands effectively to avoid further performance issues.

How to improve the performance fo this code.....this very urgent.
& Issue Number          : 22199                                    &
& Programmer            : Anjaneyulu.Pabba                         &
& Transport Number      : D01K962471                               &
& Date of Creation      : 19/03/2008                               &
& Description           : Dynamic report or query for piece count &
& Requested By          : Parvati.Polisetty                        &
REPORT ZR_SD_PIECE_COUNT_ALV no standard page heading
                              line-size 255
                              line-count 65.
                      TABLES DECLARATION
*TABLES: T320,   "Assignment IM Storage Location to WM Warehouse Number
      VBAK,   "Sales Document: Header Data
      VBAP,   "Sales Document: Item Data
      TVKOV, "Org. Unit: Distribution Channels per Sales Organization
      LTAK,   "WM transfer order header
      LTAP,   "Transfer order item
      LIKP,   "SD Document: Delivery Header Data
      LIPS.   "SD document: Delivery: Item data
                      TYPE-POOLS DECLARATION
TYPE-POOLS: SLIS .
     Internal Table Declaration
DATA : BEGIN OF TY_T320,
        WERKS TYPE WERKS_D,
        LGNUM TYPE LGNUM,
       END OF TY_T320.
DATA : BEGIN OF TY_VBAK,
        VBELN TYPE VBELN_VA,
        VTWEG TYPE VTWEG,
        WERKS TYPE WERKS_D,
        KWMENG TYPE KWMENG,
        VSTEL TYPE VSTEL,
       END OF TY_VBAK.
DATA : BEGIN OF TY_LTAK,
        LGNUM TYPE LGNUM,
        TANUM TYPE TANUM,
        VISTA TYPE LTAP_VISTA,
       END OF TY_LTAK.
DATA : BEGIN OF TY_LIKP,
        VBELN TYPE VBELN_VL,
        WERKS TYPE WERKS_D,
        LFIMG TYPE LFIMG,
       END OF TY_LIKP.
DATA : BEGIN OF TY_ITAB ,
LGNUM TYPE LGNUM,    "Warehouse Number / Warehouse Complex
WERKS TYPE WERKS_D, "Plant
VBELN TYPE VBELN_VA, "Sales Document
VTWEG TYPE VTWEG,   "Distribution Channel
KWMENG TYPE KWMENG, "Cumulative order quantity in sales units
TANUM TYPE TANUM ,     "Transfer Order Number
VISTA TYPE LTAP_VISTA, "Source actual quantity in alternative
                                             unit of measure
LFIMG TYPE LFIMG, "Actual quantity delivered (in sales units)
END OF TY_ITAB .
DATA: T_T320 LIKE STANDARD TABLE OF TY_T320 INITIAL SIZE 0 WITH HEADER
                                                               LINE,
      T_VBAK LIKE STANDARD TABLE OF TY_VBAK INITIAL SIZE 0 .
DATA: T_LTAK LIKE STANDARD TABLE OF TY_LTAK INITIAL SIZE 0 WITH HEADER
                                                                LINE.
DATA :T_LIKP LIKE STANDARD TABLE OF TY_LIKP INITIAL SIZE 0 WITH HEADER
                                                                LINE.
DATA:T_ITAB LIKE STANDARD TABLE OF TY_ITAB INITIAL SIZE 0 WITH HEADER
                                                               LINE .
*&      Fieldcatalog Declaration
DATA : T_FCAT TYPE SLIS_T_FIELDCAT_ALV,
       W_FCAT TYPE SLIS_FIELDCAT_ALV.
DATA : W_LAYOUT TYPE SLIS_LAYOUT_ALV.
********Global Data Declaration***
DATA :G_REPID        LIKE SY-REPID,
     G_EXIT(1)      TYPE C,
     GX_VARIANT     LIKE DISVARIANT,
     X_SAVE,                          "for Parameter I_SAVE
     GS_VARIANT TYPE DISVARIANT.      "for parameter IS_VARIANT
data: g_lgnum type t320-lgnum,
      g_vtweg type vbak-vtweg,
      g_erdat type vbak-erdat.
*&      Selection-Screen
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS : S_LGNUM FOR g_lgnum, "Warehouse Number
                S_VTWEG FOR g_vtweg, "Distribution Channel
                S_ERDAT FOR g_erdat ."Date on which the record was
**********"created
SELECTION-SCREEN END OF BLOCK B1 .
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
PARAMETER: P_VARI LIKE DISVARIANT-VARIANT. "Layout
SELECTION-SCREEN END OF BLOCK B2.
*&       INITIALIZATION EVENT
INITIALIZATION.
CLEAR GS_VARIANT.
'gs_variant' must at least contain the report-id to allow
saving a variant.
G_REPID = SY-REPID.
§ 2.At least field REPORT of this structure has to be filled!
GS_VARIANT-REPORT = G_REPID.
§ 3.Determine saving options.
X_SAVE = 'A'.   "The user may save all types of variants
*******Validating selection-screen values**********************
getting F4 value for display variant field
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_VARI.
PERFORM F4_FOR_VARIANT.
****validation of F4 value of display variant
AT SELECTION-SCREEN.
PERFORM PAI_OF_SELECTION_SCREEN.
*&      Start-Of-Selection
START-OF-SELECTION.
*****Subroutine to select Plant from T320
PERFORM FIND_PLANT .
*****Subroutine to select Order Quantity from VBAP
PERFORM ORDER_QUANTITY .
*****Subroutine to select Transfer Order Quantity from LTAK and LTAP
PERFORM TRANSFER_ORDER_QUANTITY.
*****Subroutine to select TDelivery Quantity from LIKP and LIPS
PERFORM DELIVERY_QUANTITY.
*&      End-Of-Selection
END-OF-SELECTION.
*****Subroutine for Fieldcatalog
PERFORM FIELDCATALOG .
*****Subroutine for Final Output
PERFORM DISPLAY_OUTPUT .
*&     Subroutine Implementaion
*&      Form FIND_PLANT
      text
--> p1        text
<-- p2        text
FORM FIND_PLANT .
SELECT WERKS
          LGNUM
          FROM T320
          INTO TABLE T_T320
          WHERE LGNUM IN S_LGNUM.
ENDFORM.                    " FIND_PLANT
*&      Form order_quantity
      text
--> p1        text
<-- p2        text
FORM ORDER_QUANTITY .
SELECT VK~VBELN
         VK~VTWEG
         VP~WERKS
         VP~KWMENG
         VP~VSTEL
         INTO TABLE T_VBAK FROM VBAK AS VK
         INNER JOIN VBAP AS VP
         ON VKVBELN = VPVBELN
         FOR ALL ENTRIES IN T_T320
         WHERE VK~VTWEG IN S_VTWEG
         AND   VK~ERDAT IN S_ERDAT
         AND   VP~WERKS = T_T320-WERKS.
ENDFORM.                    " order_quantity
*&      Form Transfer_order_quantity
      text
--> p1        text
<-- p2        text
FORM TRANSFER_ORDER_QUANTITY .
SELECT LK~LGNUM
         LK~TANUM
         LP~VISTA
         INTO TABLE T_LTAK FROM LTAK AS LK
         INNER JOIN LTAP AS LP
         ON LKLGNUM = LPLGNUM
         WHERE LK~KQUIT = 'X'
         AND   LK~BDATU IN S_ERDAT
         AND   LK~LGNUM IN S_LGNUM.
ENDFORM.                    " Transfer_order_quantity
*&      Form Delivery_QUANTITY
      text
--> p1        text
<-- p2        text
FORM DELIVERY_QUANTITY .
SELECT VBELN WERKS LFIMG FROM LIPS
          INTO TABLE T_LIKP
          FOR ALL ENTRIES IN T_T320
          WHERE WERKS = T_T320-WERKS
          AND ERDAT IN S_ERDAT
          AND VTWEG IN S_VTWEG.
ENDFORM.                    " Delivery_QUANTITY
*&      Form fieldcatalog
      text
--> p1        text
<-- p2        text
FORM FIELDCATALOG .
W_FCAT-COL_POS       = '1' .
W_FCAT-FIELDNAME     = 'LGNUM' .
W_FCAT-REF_TABNAME   = 'T320'.
W_FCAT-REF_FIELDNAME = 'LGNUM' .
APPEND W_FCAT TO T_FCAT.
CLEAR W_FCAT.
W_FCAT-COL_POS       = '2' .
W_FCAT-FIELDNAME     = 'VTWEG' .
W_FCAT-REF_TABNAME   = 'VBAK'.
W_FCAT-REF_FIELDNAME = 'VTWEG' .
APPEND W_FCAT TO T_FCAT.
CLEAR W_FCAT.
W_FCAT-COL_POS       = '3' .
W_FCAT-FIELDNAME     = 'KWMENG' .
W_FCAT-REF_TABNAME   = 'VBAP'.
W_FCAT-REF_FIELDNAME = 'KWMENG' .
*w_fcat-seltext_m     = '# of Orders'.
APPEND W_FCAT TO T_FCAT.
CLEAR W_FCAT.
W_FCAT-COL_POS       = '4' .
W_FCAT-FIELDNAME     = 'VISTA' .
W_FCAT-REF_TABNAME   = 'LTAP'.
W_FCAT-REF_FIELDNAME = 'VISTA' .
*w_fcat-seltext_m     = '# of Pcs Picked'.
APPEND W_FCAT TO T_FCAT.
CLEAR W_FCAT.
W_FCAT-COL_POS       = '5' .
W_FCAT-FIELDNAME     = 'LFIMG' .
W_FCAT-REF_TABNAME   = 'LIPS'.
W_FCAT-REF_FIELDNAME = 'LFIMG' .
*w_fcat-seltext_m     = '# of Pcs Shipped'.
APPEND W_FCAT TO T_FCAT.
CLEAR W_FCAT.
W_FCAT-COL_POS       = '6' .
W_FCAT-FIELDNAME     = 'TANUM' .
W_FCAT-REF_TABNAME   = 'LTAK'.
W_FCAT-REF_FIELDNAME = 'TANUM' .
**w_fcat-seltext_m     = '# of Pcs Shipped'.
APPEND W_FCAT TO T_FCAT.
CLEAR W_FCAT.
W_FCAT-COL_POS       = '7' .
W_FCAT-FIELDNAME     = 'WERKS' .
W_FCAT-REF_TABNAME   = 'T320'.
W_FCAT-REF_FIELDNAME = 'WERKS' .
**w_fcat-seltext_m     = '# of Pcs Shipped'.
APPEND W_FCAT TO T_FCAT.
CLEAR W_FCAT.
ENDFORM.                    " fieldcatalog
*&      Form display_output
      text
--> p1        text
<-- p2        text
FORM DISPLAY_OUTPUT .
LOOP AT T_T320 INTO TY_T320.
    TY_ITAB-WERKS = TY_T320-WERKS.
    TY_ITAB-LGNUM = TY_T320-LGNUM.
    READ TABLE T_VBAK INTO TY_VBAK WITH KEY WERKS = TY_T320-WERKS.
    IF SY-SUBRC = 0.
    TY_ITAB-VBELN = TY_VBAK-VBELN.
    TY_ITAB-VTWEG = TY_VBAK-VTWEG.
    TY_ITAB-KWMENG = TY_VBAK-KWMENG + ty_itab-kwmeng.
    ENDIF.
    READ TABLE T_LTAK INTO TY_LTAK WITH KEY LGNUM = TY_T320-LGNUM.
    IF SY-SUBRC = 0.
    TY_ITAB-TANUM = TY_LTAK-TANUM.
    TY_ITAB-VISTA = TY_LTAK-VISTA + ty_itab-vista.
    ENDIF.
    READ TABLE T_LIKP INTO TY_LIKP WITH KEY WERKS = TY_T320-WERKS.
    IF SY-SUBRC = 0.
    TY_ITAB-LFIMG = TY_LIKP-LFIMG + ty_itab-lfimg.
    ENDIF.
    APPEND TY_ITAB TO T_ITAB.
ENDLOOP.
Function Module for Displaying Final Output ********
W_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      I_CALLBACK_PROGRAM = SY-CPROG
      IS_LAYOUT          = W_LAYOUT
      IT_FIELDCAT        = T_FCAT[]
    TABLES
      T_OUTTAB           = T_ITAB.
ENDFORM.                    " display_output
*&      Form f4_for_variant
      text
--> p1        text
<-- p2        text
FORM F4_FOR_VARIANT .
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
    EXPORTING
      IS_VARIANT = GS_VARIANT
      I_SAVE     = X_SAVE
    IMPORTING
      E_EXIT     = G_EXIT
      ES_VARIANT = GX_VARIANT
    EXCEPTIONS
      NOT_FOUND = 2.
IF SY-SUBRC = 2.
    MESSAGE ID SY-MSGID TYPE 'S'      NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
    IF G_EXIT = SPACE.
      P_VARI = GX_VARIANT-VARIANT.
    ENDIF.
ENDIF.
ENDFORM.                    " f4_for_variant
*&      Form pai_of_selection_screen
      text
--> p1        text
<-- p2        text
FORM PAI_OF_SELECTION_SCREEN .
IF NOT P_VARI IS INITIAL.
    MOVE GS_VARIANT TO GX_VARIANT.
    MOVE P_VARI TO GX_VARIANT-VARIANT.
    CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
      EXPORTING
        I_SAVE     = X_SAVE
      CHANGING
        CS_VARIANT = GX_VARIANT.
    GS_VARIANT = GX_VARIANT.
ELSE.
    PERFORM VARIANT_INIT.
ENDIF.
ENDFORM.                    " pai_of_selection_screen
*&      Form variant_init
      text
--> p1        text
<-- p2        text
FORM VARIANT_INIT .
CLEAR GS_VARIANT.
GS_VARIANT-REPORT = G_REPID.
ENDFORM.                    " variant_init

Dynamic Report layout issue - Report builder 10g

Hi all,
I try to implement a dynamic report that have:
1.my_header - variable elasticity
2.my_footer - variable elasticity - the bottom it is anchored to the bottom of my_report frame
3.my_body - variable elasticity -must fit between the header and footer - the top it is anchored to the bottom of my_header
All these frames are inside a main frame my_report(same height and width as body section).
The issue is that when my_body (I have another frame and a repeating frame inside it) has more than one page, the data overrides the footer data.
I don't want to put header and footer on margin.
It will be great if you can give me some hints, or if it is possible to implement such a report
Thanks,
Gicu Buimaga

What exactly do you mean? Are you running out of space on the page when running the report? That can only be resolved by modifying your layout.
Or are you running out of space in the Layout Editor? In the layout editor you can make a page as long as you want. One physical page is not limited to be designed between the page boundaries you see in the Layout Editor.
The frames you are using have to have a Variable Vertical Elasticity, though.

Fixed columns in dynamic report ( ?horizontal-break-table:1? )

Hi
I have a dynamic report that could strech over more than one page horozontally. I use the <?horizontal-break-table:1?> tag on my first header column to show this on every page, but I also need to show the last column on every page. That meens that I have a fixed column on each end of my dynamic report, the last one is just a signatur field so its no logic to it , but its important to show it on every page.
Any tips on this ?
PS.
Sry if this is a noob question, this is not really my knowlegde area, but have to fix it anyhow :)
Tim

Robert,
It sounds like you want a completely populated table regardless of the input data. To achieve you will need to create a "dummy table" in your database, either as an actual table, or by just doing a view, it's your choice. Here is a method for the view:
select '2009-M01' as Dim1
union
select '2009-M02' as Dim1
union
select '2009-M12' as Dim1
Next you'll have to introduce this to your universe as a "dummy table". In WebI, go to Edit Query and click add query, then add Dim1 to your result objects panel. After you run your query you can perform Merge Dimensions on Dim1 to the first dimension from your report, and voila, you'll have a fully populated table.
Thanks,
John

ISQL*PLUS dynamic reports - how to pass connect string in the URL

When we run dynamic reports thru ISQL*PLUS, does anyone know how
to pass the connect string info in the URL
The following is the code from ISQL*PLUS users guide but it
dosen't show how to pass the connect string
when I tried to pass hr/your_secret_password@dbserver for userid
I got an error msg
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
<HTML>
<HEAD>
<TITLE>iSQL*Plus Dynamic Report</TITLE>
</HEAD>
<BODY>
<H1>iSQL*Plus Report</H1>
<H2>Query by Employee ID</H2>
<FORM METHOD=get ACTION="http://host.domain/isqlplus">
<INPUT TYPE="hidden" NAME="userid"
VALUE="hr/your_secret_password">
<INPUT TYPE="hidden" NAME="script"
VALUE="http://host.domain/employee_id.sql">
Enter employee identification number: <INPUT TYPE="text"
NAME="eid" SIZE="10">
<INPUT TYPE="submit" VALUE="Run Report">
</FORM>
</BODY>
</HTML>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Thanks
Jay

The form you use should work when your change
"hr/your_secret_password" to a valid username, password
and connect identifier like "hr/hr@MYDB". Don't forget to
configure MYDB in your tnsnames.ora file on the machine that has
the iSQL*Plus server.
What was the error you got?
The full URL syntax did seem to go missing from the 9.0.1 doc.
See below for the full syntax. This should be appearing in a
forthcoming FAQ.
- CJ
What syntax can I use to run an iSQL*Plus Dynamic Report?
You can run a dynamic report by entering the report URI in the
location field of your browser, or by making the report server a
link or the action for an HTML form. The iSQL*Plus 9i Release 1
documentation has examples of these.
The general syntax for running a dynamic report is:
{uri}?[userid=logon&]script=location[&param...]
where uri
Represents the Uniform Resource Identifier (URI)
of the iSQL*Plus Server, for example:
http://host.domain/isqlplus
where logon
Represents the log in to the database to which you
want to connect:
{username[/password][@connect_identifier]}
where location
Represents the URI of the script you want to run.
The syntax is:
http://[host.domain/script_name]
The host serving the script does not have to be
the same as the machine running the iSQL*Plus server.
where param
Specifies the named parameters for the script you
want to run.
Named parameters consist of varname=value pairs.
iSQL*Plus will define the variable varname to equal value prior
to executing the script e.g.
...script=http://server/s1.sql&var1=hello&var2=world
This is equivalent to the SQL*Plus commands:
SQL> define var1=hello
SQL> define var2=world
SQL> @http://server/s1.sql
iSQL*Plus, SQL*Plus and SQL keywords are reserved
and must not be used as the variable names (varname). Note also,
that since variables are delimited by the ampersand character,
there is no requirement to enclose space delimited values with
quotes. However, to embed the ampersand character itself in the
value, it will be necessary to use quotes.
For compatibility with older scripts using the &1
variable syntax, varname may be replaced with the equivalent
variable position as in:
...script=http://server/s1.sql&1=hello&2=world
Note the & is the URL parameter separator and not
related to the script's substitution variable syntax.
Commands and script parameters may be given in any
order in the dynamic report URI. However, please note that if any
parameters begin with reserved keywords such as "script" or
"userid" then it may be interpreted as a command rather than a
literal parameter.

Need correction for dynamic report

Hi Experts,
As i have very less experience in SAP , can anyone please help me.
The report code i attached here generate only 10 columns in the report and all the lines in internal table i am showing in these 10 columns, the problem is if i have more that 10 lines in the tline(script for long material text- MM03) then it leaves those lines, so
I need to create a dynamic report for this which will create columns depending on the lines in the tline.As i dnt no much about ALV i read so namy things but not able to make it dynamic
Please, can anyone help me by doing changes in this code and make it dynamic report/ALV
REPORT zmm_test_mat_desc.
TABLES : ekpo,makt, t001w.
TYPE-POOLS: slis.
DATA : thread LIKE thead.
DATA : l_index LIKE sy-tabix.
DATA : p_index LIKE sy-tabix.
DATA: BEGIN OF int_out OCCURS 0,
matnr LIKE makt-matnr,
maktx LIKE makt-maktx,
tdline1 LIKE tline-tdline,
tdline2 LIKE tline-tdline,
tdline3 LIKE tline-tdline,
tdline4 LIKE tline-tdline,
tdline5 LIKE tline-tdline,
tdline6 LIKE tline-tdline,
tdline7 LIKE tline-tdline,
tdline8 LIKE tline-tdline,
tdline9 LIKE tline-tdline,
tdline10 LIKE tline-tdline,
werks LIKE ekpo-werks,
END OF int_out.
DATA: BEGIN OF int_out_new OCCURS 0,
matnr LIKE makt-matnr,
maktx LIKE makt-maktx,
tdline1 LIKE tline-tdline,
tdline2 LIKE tline-tdline,
tdline3 LIKE tline-tdline,
tdline4 LIKE tline-tdline,
tdline5 LIKE tline-tdline,
tdline6 LIKE tline-tdline,
tdline7 LIKE tline-tdline,
tdline8 LIKE tline-tdline,
tdline9 LIKE tline-tdline,
tdline10 LIKE tline-tdline,
tline LIKE tline OCCURS 0,
werks LIKE ekpo-werks,
END OF int_out_new.
DATA: it_tlines LIKE tline OCCURS 10 WITH HEADER LINE.
****ALV list definintion
DATA: ws_cat TYPE slis_fieldcat_alv ,
int_fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE.
DATA: g_container TYPE scrfname VALUE 'BCALV_GRID_DEMO_0100_CONT1',
g_custom_container TYPE REF TO cl_gui_custom_container.
DATA : it_heading TYPE slis_t_listheader WITH HEADER LINE.
*DATA : it_fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE.
DATA : lay TYPE slis_layout_alv.
DATA : it_sort_subtotal TYPE slis_t_sortinfo_alv WITH HEADER LINE.
DATA : it_event TYPE slis_t_event WITH HEADER LINE.
DATA: v_repid LIKE sy-repid.
*selection-screen
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_werks FOR ekpo-werks OBLIGATORY .
SELECT-OPTIONS: s_matnr FOR makt-matnr OBLIGATORY .
SELECTION-SCREEN END OF BLOCK b1.
INITIALIZATION.
AT SELECTION-SCREEN.
SELECT SINGLE * FROM t001w WHERE werks IN s_werks.
IF sy-subrc NE 0.
    MESSAGE e001(319) WITH 'Plant does not Exist!'.
ENDIF.
SELECT SINGLE * FROM makt WHERE matnr IN s_matnr.
IF sy-subrc <> 0.
    MESSAGE e001(319) WITH 'Material does not Exist!'.
ENDIF.
START-OF-SELECTION.
BREAK-POINT.
PERFORM get_data.
PERFORM field_catalog.
PERFORM display_data.
END-OF-SELECTION.
*FORM GET_DATA.
FORM get_data.
DATA: l_index LIKE sy-tabix.
*To Fetch Data From Makt.
SELECT b~werks a~matnr a~maktx
INTO CORRESPONDING FIELDS OF TABLE int_out
FROM makt AS a INNER JOIN marc AS b ON a~matnr = b~matnr
WHERE a~matnr IN s_matnr
AND b~werks IN s_werks.
LOOP AT int_out.
    l_index = sy-tabix.
read table int_out_new with key matnr = int_out-matnr.
    int_out_new-werks = int_out-werks.
    int_out_new-matnr = int_out-matnr.
    int_out_new-maktx = int_out-maktx.
    thread-tdname = int_out-matnr.
    CALL FUNCTION 'READ_TEXT'
      EXPORTING
        client                  = sy-mandt
        id                      = 'BEST'
        language                = sy-langu
        name                    = thread-tdname
        object                  = 'MATERIAL'
      TABLES
        lines                   = it_tlines
      EXCEPTIONS
        id                      = 1
        language                = 2
        name                    = 3
        not_found               = 4
        object                  = 5
        reference_check         = 6
        wrong_access_to_archive = 7
        OTHERS                  = 8.
*Loop on it_tlines where long text is coming .
    LOOP AT it_tlines.
      IF sy-subrc = 0.
        p_index = sy-tabix.
        IF p_index = 1.
          int_out_new-tdline1 = it_tlines-tdline.
        ELSEIF p_index = 2.
          int_out_new-tdline2 = it_tlines-tdline.
        ELSEIF p_index = 3.
          int_out_new-tdline3 = it_tlines-tdline.
        ELSEIF p_index = 4.
          int_out_new-tdline4 = it_tlines-tdline.
        ELSEIF p_index = 5.
          int_out_new-tdline5 = it_tlines-tdline.
        ELSEIF p_index = 6.
          int_out_new-tdline6 = it_tlines-tdline.
        ELSEIF p_index = 7.
          int_out_new-tdline7 = it_tlines-tdline.
        ELSEIF p_index = 8.
          int_out_new-tdline8 = it_tlines-tdline.
        ELSEIF p_index = 9.
          int_out_new-tdline9 = it_tlines-tdline.
        ELSEIF p_index GE 10.
          int_out_new-tdline10 = it_tlines-tdline.
        ENDIF.
      ENDIF.
    ENDLOOP.
    DELETE ADJACENT DUPLICATES FROM int_out .
    APPEND int_out_new.
    CLEAR int_out_new.
ENDLOOP.
Field Catalog
***MATERIAL NO no
int_fcat-tabname = 'INT_OUT_NEW'.
int_fcat-fieldname = 'WERKS'.
int_fcat-reptext_ddic = 'Plant'.
APPEND int_fcat .
***MATERIAL NO no
int_fcat-tabname = 'INT_OUT_NEW'.
int_fcat-fieldname = 'MATNR'.
int_fcat-reptext_ddic = 'Material N0'.
APPEND int_fcat .
*material Short Description
int_fcat-tabname = 'INT_OUT_NEW'.
int_fcat-fieldname = 'MAKTX'.
int_fcat-reptext_ddic = 'Material Short Description'.
int_fcat-datatype = 'CHAR'.
int_fcat-outputlen = '45'.
APPEND int_fcat .
Material Long Description1
int_fcat-tabname = 'INT_OUT_NEW'.
int_fcat-fieldname = 'TDLINE1'.
int_fcat-reptext_ddic = 'Material Long Description1'.
int_fcat-datatype = 'CHAR'.
int_fcat-outputlen = '75'.
APPEND int_fcat .
Material Long Description2
int_fcat-tabname = 'INT_OUT_NEW'.
int_fcat-fieldname = 'TDLINE2'.
int_fcat-reptext_ddic = 'Material Long Description2'.
int_fcat-datatype = 'CHAR'.
int_fcat-outputlen = '75'.
APPEND int_fcat .
Material Long Description3
int_fcat-tabname = 'INT_OUT_NEW'.
int_fcat-fieldname = 'TDLINE3'.
int_fcat-reptext_ddic = 'Material Long Description3'.
int_fcat-datatype = 'CHAR'.
int_fcat-outputlen = '75'.
APPEND int_fcat .
Material Long Description4
int_fcat-tabname = 'INT_OUT_NEW'.
int_fcat-fieldname = 'TDLINE4'.
int_fcat-reptext_ddic = 'Material Long Description4'.
int_fcat-datatype = 'CHAR'.
int_fcat-outputlen = '75'.
APPEND int_fcat .
Material Long Description5
int_fcat-tabname = 'INT_OUT_NEW'.
int_fcat-fieldname = 'TDLINE5'.
int_fcat-reptext_ddic = 'Material Long Description5'.
int_fcat-datatype = 'CHAR'.
int_fcat-outputlen = '75'.
APPEND int_fcat .
Material Long Description5
int_fcat-tabname = 'INT_OUT_NEW'.
int_fcat-fieldname = 'TDLINE5'.
int_fcat-reptext_ddic = 'Material Long Description5'.
int_fcat-datatype = 'CHAR'.
int_fcat-outputlen = '75'.
APPEND int_fcat .
Material Long Description5
int_fcat-tabname = 'INT_OUT_NEW'.
int_fcat-fieldname = 'TDLINE5'.
int_fcat-reptext_ddic = 'Material Long Description5'.
int_fcat-datatype = 'CHAR'.
int_fcat-outputlen = '75'.
APPEND int_fcat .
Material Long Description6
int_fcat-tabname = 'INT_OUT_NEW'.
int_fcat-fieldname = 'TDLINE6'.
int_fcat-reptext_ddic = 'Material Long Description6'.
int_fcat-datatype = 'CHAR'.
int_fcat-outputlen = '75'.
APPEND int_fcat .
Material Long Description7
int_fcat-tabname = 'INT_OUT_NEW'.
int_fcat-fieldname = 'TDLINE7'.
int_fcat-reptext_ddic = 'Material Long Description7'.
int_fcat-datatype = 'CHAR'.
int_fcat-outputlen = '75'.
APPEND int_fcat .
Material Long Description8
int_fcat-tabname = 'INT_OUT_NEW'.
int_fcat-fieldname = 'TDLINE8'.
int_fcat-reptext_ddic = 'Material Long Description8'.
int_fcat-datatype = 'CHAR'.
int_fcat-outputlen = '75'.
APPEND int_fcat .
Material Long Description9
int_fcat-tabname = 'INT_OUT_NEW'.
int_fcat-fieldname = 'TDLINE9'.
int_fcat-reptext_ddic = 'Material Long Description9'.
int_fcat-datatype = 'CHAR'.
int_fcat-outputlen = '75'.
APPEND int_fcat .
Material Long Description10
int_fcat-tabname = 'INT_OUT_NEW'.
int_fcat-fieldname = 'TDLINE10'.
int_fcat-reptext_ddic = 'Material Long Description10'.
int_fcat-datatype = 'CHAR'.
int_fcat-outputlen = '75'.
APPEND int_fcat .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
      i_callback_program = sy-repid
      it_fieldcat        = int_fcat[]
    TABLES
      t_outtab           = int_out_new
    EXCEPTIONS
      program_error      = 1
      OTHERS             = 2.
ENDFORM. "display_data
Regards
Nik.

Nikhil,
Instead of declaring 10 lines, please declare a variable of type STRING.
Then append each line of your material text and concatenate it into the string.
Then you can comfartably have one long text and have it displayed to the user.
Please let us know if any further information is required.
Thanks
Ganesh.S

How can i create an dynamic report in Java

hello everybody,
I want to make dynamic reports in Java. Report contain data and images with good layout.. such as crystal reports presentation..
Reports fields decided at run time or we can say that it is generated according to user requirement...
can it is possible in Java. If it is then which tool is better for it..
please suggest me.. this is very urgent requirement for me...

i don't know what types of tools are avaiable in market... Tools for what? You still didn't tell us what exactly you want to do.
i just imagin that
"An user create a database dynamically on server
databaseNobody "dynamically creates a database".
and he decide reports desgin according to
his requirement..... we provide an control for this
type possibilities....."
so this is question is build in my mind.. so i
forward this question to this forums..
I am just going to check the physibility of my mind
imagination...Feasibility you mean. IMHO, the feasibility of creating that stuff yourself is very low. Reinventing the wheel usually doesn't make it better, and it's likely to be more expensive to pay you for creating an inferior solution (not because of lack of skills, but simply because the available products had a few years time to grow, feature-wise) than to simply buy the licenses. Look at Crystal Reports or JFreeChart or Jasper Reports. Or use Google to look up J2EE-based reporting libraries. There might be more.
Which of these is best, I don't know, I never used any of those. Also, the definition of "best" changes with the requirements. What's better, a Ferrari or a truck?

Dynamic reporting in Crystal Reports XI

Hi,
Need to know about dynamic reporting feature using Crystal Reports XI.
Is Business View helpful for dynamic reporting?
Any link to get some material on dynamic reporting/ business views?
appricate your comments.
Thanks,
Cherry

In the SAP Service Marketplace, go to http://help.sap.com . Under the Business Objects tab you can select Business Objects Enterprise, and in there is a Business Views Administrator Guide. That should provide you all of the basic information on Business Views, how they work and how to use them.
Business Views can be helpful to you depending on what you are looking to do with your data.

Financial Reporting making of Dynamic Reports v 11.1.1.2

Hi,
I have recently going through designing of a dynamic report in Financial Reporting which consists of financial representation as follows:
There are some data which is there in the Schedules of accounts.
Now the user wants to a make a drill down of all the account codes there in the schedule like
schedule 13 other income.
All the account codes in Schedule should bw drill down which I am able to make.
Now for each account codes they want a sorting in descending order to find out which entity is contributing to how much revenue for the oraganistion or
similarly for the cost which are in other schedules like 14,15,16 tc.
After that they want a insertion of cell text function for each cell having a combination of account codes and entity which is having a adverse variance and analsis
for the same.
If someone can throw a light on this about how to do this.

I think you have already posted this problem on another post, I said it is possible it could be a ports issue.
Have a look at the following http://www.oracle.com/technetwork/middleware/bi-foundation/epm-component-communications-11121-354680.xls
Select FR studio as the client and it should give indication to the ports that need to be opened.
Cheers
John
http://john-goodwin.blogspot.com/

How to use both Static and dynamic Reports in WAD using a single template.

Hi,
I have 2 reports - Report1 & Report2. Report1 is a static report with 3 column in it. In WAD user does not want to see the third series in the chart so I have made series3 invisible in the chart.
I am calling the Report2 via 'SET_DATA_PROVIDER_PARAMETERS' in the button option.
Now the issue is that, Report2 is a dynamic report which is using a calyear vaiable range. As Report2 is using the template of Report1, Series3 of Report2 also gets hidden.
Any solution for this?
Thanks
Nisha

Hi Nisha,
After setting the Report 2 DP thru SET_DATA_PROVIDER_PARAMETERS, you can use one more command SET_ITEM_PARAMETERS on the Chart webitem & edit the Series to make it visible. If there is a way to reset the DP back to Report 1, then you must once again use SET_ITEM_PARAMETERS to hide the Series.
Or you can use another Chart webitem for Report 2 DP & make the Chart webitem for Report 1 hidden & the Chart webitem for Report 2 visible using SET_ITEM_PARAMETERS after setting Report 2 DP using SET_DATA_PROVIDER_PARAMETERS.
--Priya

Dynamic Reports in java application

Hi,
I want to create dynamic reports in an java standalone application, I have downloaded the Jfreereport <http://sourceforge.net/projects/jfreereport>
I'm not sure, whether it could get data from a JDBC source. (or is there anyother solution to generate dynamic reports in a java application?).
Thanks in advance,
Payam

I generate reports from a webserver ( Tomcat ) in PDF using iText ( www.lowagie.com/iText ). It works great. JFreereport is also using this iText and you shouldn't have any problems using JDBC. Try to read the tutorial first about iText first. This will give you an idea how JFreereport works.
- Dieter

Dynamic report output in a webdynpro alv

Hi,
I have created a dynamic report in the R/3 system . In this report, i am creating a report program within the report and subsequently executing this dynamically created report and displaying in the ALV..
Is it possible to handle such a scenario in a webdynpro ALV. One option is to use ITS and display the report in the portal but is there some other way so that i can directly view this report in an alv grid in a view.
all help appreciated!!
regards,
Priyank

Hi Priyank,
This could be one of the solution:
1] Run the report in background mode (using submit statement, dn't forget to give printer as LOCL), get the spool id programatically. Use the FM's CONVERT_OTFSPOOLJOB_2_PDF or CONVERT_ABAPSPOOLJOB_2_PDF.
Which returns the ouput of table tline, convert this to xtring and bind it to xtring attribute.
In view add a interactive form and bind the xstring attribute to the Interactive form.
By following the above steps, we can display the result in the PDF in WD ABAP.
2] The report result is ALV and in most of the cases we generally do not have function modules or any other easy way to get the output.
In such cases the best approach which we follow is, to run this in background mode and generate the spool and display the ouput in PDF.
3] But if intertactive form is not present in your requirement then we need to debug the logic of the report (if no FM or class present) and get the results and display it in the View.
You can create a service which takes the parameters of the report, submits it and
transfers the result to HTML. In a view you use an IFRame which takes the URL of the service and shows the result HTML.
just additionally read this thread,
Display simple ABAPLIST
Here an IFrame is used to display HTML output of report. But as IFRame gets obsolete the Suresh's solution seems to be pretty cool.
Hope this will help you!
Cheers,
Darshna.

Create a dynamic report

Hi,
I would like to create a dynamic report in crystal report.
put data fields, text fields, criteria parameters on report in run time.
I will appreciate if you can send me an example code in java that creates and shows the report.
Thanks,
Anat

So find the appropriate website and forum and ask there.

Financial Reporting Studio: Formula for percentages in Dynamic report

Hi,
I have a formula problem in Financial Reporting Studio vers. 9.20.582. I created a dynamic report with four columns:
1. Column: Entities
Entity A, Entity B
2. Column: Accounts
Account A, Account B, Account C
3. Column A: Accounts
Data for a selected period
4. Column B: Formula
Percentage Account B to Account A and Account C to Account A per each Entity
My question is: Could I create a formula in 4th column that shows a percentage of Account B in comparison to Account A for each Entity (everything in one cell)?
Because when I use for example the Formula Percentoftotal([a], [a,1(1)]) it shows for second entity B the wrong percentages.
I hope this was understandable.
Thank you very much for your help.
Chris
Edited by: user8009251 on 14.04.2010 00:45
Edited by: user8009251 on 14.04.2010 00:46

Hi
Good question? I think, there is a solution.
You can use the concept of multiple grid here.
Please keep the referred grid at one place and use another grid where you want the formulas.
Please mail me for further info: [email protected]

Dynamic Report Heading - Classical report

Similar Messages

Maybe you are looking for