Dynamic scrap mapping in to SAP

Hai All,
I am having scenario like this... for finished product based on the order qty system should take different assembly srap percentage like. For order qty 0 to 100 it is 10% , From 100 to 200 it is 20% , from above 200 it is 15% like this. Is there a way to map this in SAP.

Dear
Did you try to maintain the Assmbly scrpe % in MRP1 view ??
Maintain the same and create the Production Order .It will automatically increase the Order Qty and you can find scrap portion and percenatge in CO02.
If you have already created PO and now maintaing Assmbly scarpe at MRP1 for FG , then call the Read PP master date before Goods Issu happend againt the PO (Status should nto be GMPS )
Refer : Production Order Scrap flow
Regards
JH

Similar Messages

Dynamic configuration of Adpater in SAP PI

Hi,
I have a requirement where in I have to dynamically configure connection adpater in SAP PI 7.1 EHP 1, the configuration data will be pulled form database on the bases of the message content.
Thanks in advance.
Gautam

Not sure if you are lookingg for dynamic configuration as mention in the below blog..
<a href="/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping Configuration of Some Communication Channel Parameters using Message Mapping</a>
<a href="/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14: The same filename from a sender to a receiver file adapter - SP14</a>
<a href="/people/daniel.graversen/blog/2006/10/05/dynamic-configuration-in-adapter-modules Configuration In Adapter Modules</a> <a href="/people/michal.krawczyk2/blog/2006/10/09/xi-dynamic-configuration-in-adapter-modules--one-step-further Configuration In Adapter Modules</a>
~SaNv...

Dynamic value mapping

hi,
can u plz explain about Dynamic value mapping and where it actually use this
thanks
guna

Hi ,
Dynamic value mapping.is nothing but
It is FixValues and ValueMapping under Conversion Functions.
Eg:
You need such a requirement. Where the values in the source are mapped to someother value in the target as below.
1--> Mr
2--> MS
3--> MRS
FixValues is used when you know the entire set of Key value pair in the Design Time. You give the Key and the value in the FixValues and the mapping checks and maps the values to the target.
In the case of Value mapping, you maintain this Key - Value pair in the Integration Directory and thereby make changes easily and also use them in the Mapping in IR
Refer These blogs
ValueMapping using the Graphical Mapping Tool -value mapping using grapic mapping tool
Value Mapping replication - value mapping replication
Accessing Value Mapping defined in Directory using Java functions - accesing value mapping
Dynamic Date Conversion in Message Mapping - dynamic date conversion
Dynamic Configuration of Some Communication Channel Parameters using Message Mapping - dynamic confighuration
Dynamic file name(XSLT Mapping with Java Enhancement) using XI 3.0 SP12 Part -II - dynamic file name
and also
Refer this link
http://help.sap.com/saphelp_nw2004s/helpdata/en/d7/e551cf896c3a49bb87bb4ce38c99c8/frameset.htm - external context mapping
Regards,
Suryanarayana

MDM dynamic value mapping

Hi,
Gurus,
I'm working on idoc to file scenarion and i have to implement MDM dynamic value mapping for one of the idoc fields, and i have no idead about MDM dynamic value mapping , can anybody help me with step-by-step procedure to implement it and I'm not java guy...
Thanks!!
Waiting for reply...

Hi,
This might help you,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/62770ffa-0301-0010-a0b2-c77294a3902e
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5a9c405f-0a01-0010-0980-fa5082e517e6
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/603ca425-0c01-0010-cdb2-c10d13c43631
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4ce0d691-0b01-0010-f4aa-c938d438ceb2
Setting up algorithm on MDM Client
Regards
Agasthuri Doss

Mapping query in SAP PI

Hi Experts,
I have a mapping query in SAP PI. Actually I am mapping the source and target fields, now the problem is.
The sender filed is subnode of the main node, and I have mapped the two main nodes in the sender and receiver together.
Now, whether the sender main node comes all the subnode values will come or do we need to do something else for it.
Both the sender and target main nodes and subnodes can have multiple repetations.
I think One to One mapping wont do in this case. What needs to be done please help??
Thanks and regards,
Aniruddha

Hi Vijay,
Thanks a lot.I will try this out. Can you help me in another mapping problem, the req. is that i need to map the source and the target.
The condition basically is :
If no value in LIFEX use VBELN to map to a single target field.
But I wont use UDF in this case.
Please help.
Regards,
Aniruddha

What are mapping rules in sap xi/pi ?

hi experts
what are mapping rules in sap xi/pi ? how we can use this rules for special charters mapping .

>
praveen.tecnics wrote:
> hi experts
>
> what are mapping rules in sap xi/pi ? how we can use this rules for special charters mapping .
to map special characters you need to use an element called CDATA in your mapping
a special character causes an error....as XI wont be able to read it (as it is not in a proper XML format)...so to parse this character through XI without causing an eror use the CDATA....just make a search on SDN and you will find the proper use of it....
For your info: http://www.w3schools.com/XML/xml_cdata.asp
Regards,
Abhishek.
Edited by: abhishek salvi on May 20, 2009 8:52 AM

WIKI: Mapping Concepts in SAP XI

Hi all,
I have posted a WIKI for the mapping concepts in SAP XI, where you could find the details of various blogs and other links regarding the mapping concepts in SAP XI.
Please refer this link:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/mappingConceptsinSAPXI
Regards,
Nithiyanandam

Hi,
check this links
Comparing Performance of Mapping Programs
Message mapping
Message Mapping Simplified - Part I
/people/sravya.talanki2/blog/2005/12/08/message-mapping-simplified-150-part-ii
http://help.sap.com/saphelp_nw04/helpdata/en/43/c4cdfc334824478090739c04c4a249/frameset.htm
New functions in the Graphical Mapping Tool XI 3.0 SP13
File Content Conversion for Multi Hierarchical Structure
Message Splitting Using the Graphical Mapping Tool
Number formatting to handle LARGE Numbers
Optimizing Lookup's in XI
Minimize memory usage during Message Mapping when replicating an element
Mapping Context Changes in XI
/people/jeyakumar.muthu2/blog/2005/12/19/data-mining-using-apriori-algorithm-in-xi-150-part-ii
/people/jeyakumar.muthu2/blog/2005/11/23/data-mining-using-apriori-algorithm-in-xi-150-part-i
/people/jeyakumar.muthu2/blog/2005/12/30/data-mining-using-apriori-algorithm-in-xi-150-part-iii
Java Mapping to handle flat files in SAP XI
xpath functions in xslt mapping
http://help.sap.com/saphelp_nw04/helpdata/en/e2/e13fcd80fe47768df001a558ed10b6/content.htm---java mapping
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50ce0433-4309-2b10-4bb4-d421e78463f7 -
java mapping
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00ee347e-aabb-2a10-b298-d15a1ebf43c5 -
value mapping
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8e7daa90-0201-0010-9499-cd347ffbbf72
ABAP MAPPING
The specified item was not found.
How to call XI ABAP Mapping via RFC
Different types of Mapping in XI
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/how%20to%20use%20abap-mapping%20in%20xi%203.0.pdf
- The specified item was not found.
Testing ABAP Mapping
XSLT
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/01a57f0b-0501-0010-3ca9-d2ea3bb983c1
xpath functions in xslt mapping
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/006aa890-0201-0010-1eb1-afc5cbae3f15
regards
srinivas

Dynamic Tempo Mapping In Audition CC

Hello Adobe,
I've seen various forum postings about this in the past, but nothing very recently. I just downloaded the latest version of Audition CC. It looks great, a lot of cool new features, but I wanted to reiterate on past postings that dynamic tempo mapping functionality would be extremely useful. It doesn't need to be anything too fancy. Just need to be able to tell Audition that after 30 bars of 4/4 at 120 bpm, I'd like the metronome and bars/beats display to change to 3/4 at 130 bpm etc.
Just want to bump this back onto your radar. Thanks.
-Brendan

I've used the Ozone with Audition in the past (we're talking about the keyboard/audio combo device, right?) and it's been fine. If you're seeing the playhead move and the level meters update when attempting to play through it, that means the communication should be there.
Any chance you can show us screenshots of the "Audio Hardware" and "Audio Channel Mapping" panels in the preferences dialog? That might help get started.

Value Mapping replication from SAP

Hi
I have gone thru the Blogs and threads related to value mapping replication from SAP.
Inmy observervation http://sap.com/xi/XI/System of SAP BASIS 7.00
still I have some doubts...
1)what is the differnce between ValueMappingReplication(Asynchronous) and ValueMappingReplicationSynchronous .
when we will use them.
2) Message type ValueMappingReplication contains Operation ,GroupId,Context,scheme,agency.
what is the meaning of Operation??
what is the use of group ID??
is this necessary to maintain all these values in Ztable and also source and target values ?? and use them in Abap aproxy logic??
3) is there any Message Mapping Needed.?? and Interface Mapping Needed to implement value Mapping replication??
but in this blog
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1301i [original link is broken] [original link is broken] [original link is broken] didnt find any interface mapping .
4)what is the Sender Adapter type ??
5) if I did replication from SAP..can I see the details in ID
please guide me
regards
munna

hi
1)what is the differnce between ValueMappingReplication(Asynchronous) and ValueMappingReplicationSynchronous .
In sync you will get the value mapping replication status back and in async you won't. In sync based on the response u can update again in case of any failure. If data size is large use async.
2) Message type ValueMappingReplication contains Operation ,GroupId,Context,scheme,agency.
what is the meaning of Operation??
The operation that you are going to perform. Below is the operations list and the contents to be set in the message for the same
Insert = all fields must be set;
Delete =all fields must be set;
DeleteGroup = fields GroupID and context must be set;
DeleteContext = field Context must be set;
DeleteContextGeneric = Context contains the starting part for the context to be deleted
what is the use of group ID??
Displays the different representations of an object.
A value mapping group is identified uniquely by a GUID.
You can also assign a name to a value mapping group.
is this necessary to maintain all these values in Ztable and also source and target values ?? and use them in Abap aproxy logic??
no. system creates the value mapping table. you can take it frm there. no need of any ztables.
3) is there any Message Mapping Needed.?? and Interface Mapping Needed to implement value Mapping replication??
You will be sending the value mapping data from a sender system. If it can sent in the same format not required, otherwise you will have to.
4)what is the Sender Adapter type ??
Any adapter...depends on the sender system.
5) if I did replication from SAP..can I see the details in ID
You can see it in Cache monitoring in RWB.
for more details refer
http://help.sap.com/saphelp_nw70/helpdata/EN/13/ba20dd7beb14438bc7b04b5b6ca300/content.htm
rgds
Arun

Value Mapping and Dynamic Value Mapping

Hi Experts,
Could you please give a example for Value Mapping and Dynamic Value Mapping?
Regards
Sara

Sara,
I am assuming that you are going to use the Receiver JDBC adapter to select the data from the database.
In this case, take a look at this blog of mine to understand how te dataypes should be created for the request and response JDBC Select Query.
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
The only difference would be that in the mapping when you create the Request Message for the JDBC adapter, the columns you create would be determined from the Source,
i.e, if value = 1 , only the required Columns should be mapped as Blank constants,
likewise for the other requirement.
the columns you do not want to select you should not create them in theoutput of your request mapping.
Regards
Bhavesh

Mapping DEPB in SAP

Hi,
We need to map DEPB in SAP. We need to record various info like expiry date, Purchase Value, Actual Value, Port. Also wee need to pay off the custom duty using the DEPB.
Any pointers would be appreciated.
Regards,
Indraveer Singh

Hi,
My client purchases DEPB from the open market which he uses to pay off the custom duty while importing the goods. Since it is purchase from the open market therefore he gets some profitability on it as well. eg. One DEPB number xxxxxx has a value of INR 100000 (ie this DEPB can be used to pay off the custom duty of INR 100000) but he can buy it in the open market for 80,000 INR. This means he has made a profit of 20000 INR on this individual DEPB license. Moreover since various information is linked with this DEPB like : License number, Port where it can be used, expiry date, bought from etc, we need to capture all these information somewhere.
And the client also uses these DEPB( normally they are more then one in most cases) to pay off the import duties to the custom authorities.
I hope I am clear enough. If you require any other information please let me know.
Hoping to get a solution on this.
Regards,
Indraveer

Is this the right to use or for iOS can use dynamic google maps embeded(can be embedded fo iOS)

function displayMap(e) {
var title = e.data.title,
latlng = e.data.lat + ',' + e.data.lng;
if (typeof device !='undefined' && device.platform.toLowerCase() == 'android') {
window.location = 'http://maps.google.com/maps?z=16&q=' + encodeURIComponent(title) + '@' + latlng;
} else {
$('#map h1').text(title);
$('#map div[data-role=content]').html('<img src="http://maps.google.com/maps/api/staticmap?center=>' + latlng + ' &zoom=16&size=320x420&markers=' + latlng + '&sensor=false">');
$.mobile.changePage('#map', 'fade', false, true);
my phonegap (Adobe press, Powers jQuery with dw 5.5) book (old book (c)2010-11) says for above code: // is this valid for today, is this the right to use or for iOS can use dynamic google maps embeded(can be embedded fo iOS)???
On iOS, calling window.location loads the map directly
into the app. That’s great until you realize that iOS devices
don’t have a Back button, so there’s no way to exit the
map. To get round this problem, I loaded a static map as
an image in the map page block. It’s not interactive, but at
least you can continue using the Travel Notes app after
viewing the map by clicking the Back button generated by
jQuery Mobile.

Well, this took me a while to get solved, but it is indeed solved.
I tried USB Overdrive and it could, and perhaps should work, but apparently it will not. When adding a device, it seems that USB Overdrive is not set up to handle any input device that does not register itself as either a Mouse or a Joystick. The VEC USB Footpedal that I'm using is "Device type: Other".
So, I went for Quickeys. And Quickeys can do it all. It did recognize the device, I was able to assign it to the scope of the particular audio playback app I wanted to use (Amazing Slow Downer OS X - which is truly amazing. Any musicians reading this who are looking for a way to learn pieces by ear, this does it better than anything else I've seen yet).
I created a shortcut in Quickeys for the ASD app; added the middle button of the foot pedal as the trigger; set one step, entering 'space bar' as the step (which toggles playback, similar to many audio players).
It all worked.
Quickeys is very confusing and seemingly featured with an endless array of options. Enter at your own risk. Ask me for help. This was the only way to get it done that I could find. I did write to the author of USB Overdrive asking him to please support additional devices as I did find some traction from gamers who like to use a foot pedal in addition to other input devices. There was a Windows-only management utility for the foot pedal that was intended for custom input, assigning the buttons to any keyboard input or mouse click event. It would be nice to have a simple and easy to use utility like this. But, Quickeys did do the job.
Thanks for your help, you guys!!!

Dynamic Loading Maps BizTalk 2006 R2 upgrade to BizTalk 2013

We are in the process of upgrading BizTalk to 2013 R2 from BizTalk 2006 R2.
In an orchestration we are dynamic using map type classes.
It works fine in 2006 R2, 2010 but not 2013 R2.
When I run the below code in VS 2008 it retrieves the class types from the assemblies.
In VS 2013 it does not. Why?
//CCIJIS_WarrantClearRequest_X_MCIJIS_CLWR
string typeName =
"x";
string className =
"x";
Type mapType =
Type.GetType("MCIJIS_RCLW_X_CCIJIS_WarrantClearResponse,
CCIJIS.State.Transforms, Version=1.2.0.0, Culture=neutral, PublicKeyToken=d18be0be6c153b84");
            mapType =
Type.GetType("CCIJIS.State.Transforms.MCIJIS_RCLW_X_CCIJIS_WarrantClearResponse");
if (mapType ==
null)
foreach (Assembly
a in
AppDomain.CurrentDomain.GetAssemblies())
if (a.FullName.Contains("CCIJIS.State.Transforms"))
                        typeName = a.FullName;
                        mapType = a.GetType(a.FullName);
foreach (Type
type in a.GetTypes())
                            className = type.FullName;
James Nance

Hi James,
Try debugging your code by attaching Visual Studio to the BTSNTSVC.exe process and see where exactly your code is failing.
For debugging your orchestration refer:
BizTalk Orchestration – Orchestration debugging inside Visual Studio
Checkpoint: Ensure you have using correct fully-qualified map name.
Rachit
Please mark as answer or vote as helpful if my reply does

Abap mapping - pb on SAP example?

Hi,
I try to use an Abap mapping for flow "IDoc -> XI -> structured file". For that I have modified the 1st example of SAP (by changing line: "direct = 1").
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how to convert between idoc and xml in xi 3.0.pdf
But when I send an IDoc from R/3, I have this error in Message Monitoring: <i>"Error in mapping program YCL_AM_DE00109 (type R3_ABAP, kernel error ID UNCAUGHT_EXCEPTION)"</i>.
In fact, it seems that problem is when I get data from field "TABNAM":
* Control data: segment EDI_DC40
data: el_element type ref to if_ixml_element.
el_element = idocument->find_from_name( 'TABNAM' ).
ls_edidc-tabnam = el_element->get_value( ). "<<<
1. Is there the good example for such a flow?
2. Anybody have an idea to solve that?
Regards.
Mickael

Hello,
@Stefan: I need this lookup e.g. for outbound processes for some conversions / setting dynamic parameters depending on the RCVPRN inside an IDoc. That means I have a unique key (RCVPRN_<messageType>) and some (4-6) additional information (e.g. mail subject, FTP filename,...) to this key whch I would like to access during mapping runtime. Vice versa, for inbound scenarios, inside a EDI -> IDoc mapping, I need at least a simple "FixValues" translation from some kind of EDI partner id into the corresponding SAP customer number.
@all: So from my experience value mapping does not realy fit this "translation" needs? There are some disadvantages, for example if both input values "A" and "B" should be translated into "1", this is not possible, as the keys have to be unique in both directions.
By the way, I have now also implemented the RFC lookup in my mapping as alternative to the JDBC lookup. To me there are at first sight some pros and cons:
- Pro: You just need a "simple" RFC user within the RFC channel. You do not need to use the PI system user / pw which owns the Z table.
- Con: If you select more than one field from the table, the RFC lookup function return all fields of the db entry just separated by a delimiter, which is why you need to implement some "parsing" of the fields in a UDF (minor disadvantage).
Still interesting discussion!
Thanks,
Christoph

Dynamic scrap praposal - Incremental scrap

Hi all,
We are going to implement scrap functionality in one our project. In that project client requirement is dynamic proposal of scrap based on the quantity. We need this scrap praposal prefferably at assembly scrap level.
For exampl: 0 - 1000 order qty. -
10% scrap
1001 - 10000 order qty -
8% scrap
10001 - 100000 order qty -
5% scrap.
To get the above functionality what needs to be done.
Thanks & Regards,
Lovith

I don't see how to fit the assembly scrap in scale as per your requirement in standard SAP. Even the enhancement, there are going to be many. Since the assembly scrap percentage is actually linked to several area of applications, such as costing (std. cost estimate), MRP run, and production order creation.
One work around is to apply the component scrap instead. Calculate backward from assembly scrap to component scrap. Use several BOMs and put in percentage in BOM master. Use production version to fit with your lot size. As this is per standard, therefore the costing, MRP, and order should be handled properly. Of course the drawbacks are you have to calculated backward from assembly to component scrap and also your BOM master will be increased.
If you wanna go for the enhancement, you need
- BADI MD_MRP_PARAMETERS in MRP run.
- BADI WORK_ORDER_UPDATE in production order creation (if you always convert from planned order, then you can adopt the scrap from the MRP Badi. But in case you create production order manually, you will need this BADI).
- For costing run, just pick one assembly scrap % that will reflect in std cost estimate and put in material master.
Hope it helps.

Dynamic scrap mapping in to SAP

Similar Messages

Maybe you are looking for