Dynamic Selection for non-logical database

How to read the dynamic selections information to a table that is not in logical database for ex. : BSAD.
Currently, i'm reading from the function module 'RS_REFRESH_FROM_DYNAMICAL_SEL'. The value for the fields are read one by one...........totalling to thousands of codes.
Does anyone noe a shorter way of reading it ?
Please give sme guidance. Thank you.

Hi Mr Anthony,
I have a report using logical database. However, the logical database used does not contain a table, BSEG, which i need to access.
I understand that for tables which are not in the logical database, I cannot use the "GET <tablename>" in the "START_OF_SELECTION" event.
Please advise on how to use the "SELECT" statement for the BSEG table with constraints from the dynamic selections. Thank you

Similar Messages

Modifying Dynamic selection in standard logical database

Hello guys,
I have a requirement to add a field to a dymamic selection of standard programs.
The standard programs used the logical database KDF.
I have created a custom selection view and included the required field which is from table BKPF.
But this field is not appearing as the table BKPF is not defined as a node in Dynamic selection but in only field selection.
Can anyone please provide me with come help on this?
I need to add the a field from BKPF to the dynamic selection of standard logical DB KDF. Is this possible?
Thanks and regards

Hello Thomas,
thank you very much for the precious help.
I appended the field BKTXT to BSIK and BSAK as used in logical database and these are automatically filled for new postings thanks to Move corresponding (as indicated).
We are left with only to feed these new fields with existing data/records.
kind regards..
Edited by: Devi on May 19, 2009 12:51 PM
Edited by: Devi on May 19, 2009 12:51 PM

Adding a dynamic selection to a logical database query

Hello,
I would like to add a dynamic selection to a SQ02 Infoset using logical database SDF. I need the report to show only documents created at certain dates. I've added a selection field "CR_DATE" for BKPF-CPUDT to the Infoset and added the following code:
SELECT * FROM BKPF
WHERE BKPF-CPUDT IN CR_DATE.
ENDSELECT.
However, the report displays documents created on all kinds of dates regardless of the ones I've specified at the selection screen.
I can only use SQ02 and SQ01. I don't have access to most other transactions such as SE36 nor have the authorization to edit the existing report transaction such as FAGLL03.
Please, help.

Hi John,
Only certain table fields are allowed in dynamic selection, please see this sap note for detail :
Sap Note 310886 - Line items: Dynamic selections ignored
Permitted tables:
SKA1: all fields
SKB1: all fields
BSIS: all fields
So BKPF-CPUDT field is not allowed for dynamic selection.
Regards
Javed

How to get dynamic select options from logical database?

Hi,
in one of my extended reports (means - overwritten standard SAP functionality in Z-namespace) I'm using LDB 'DDF'. I've been requested to validate some of the dynamic selection options (for example - field HKONT at Document level) and to split the logic depending on the particular value(s).
Tracking what is happened in the LDB program I found that this select option is added as dynamic WHERE clause to the SELECT statement - in a way:
WHERE bukrs = p_burks AND ... AND
(where_tab)
Is there a way to get values of these LDB dynamic select options into my report and if yes - how?
Thanks in advance.
Regards,
Ivaylo Mutafchiev
Senior SAP Abap Consultant

Hi,
Try to use the following fm in your report and check
call function 'RS_REFRESH_FROM_DYNAMICAL_SEL'
    exporting
      curr_report        = sy-cprog
      mode_write_or_move = 'M'
    importing
      p_trange           = gt_dyn_trange
    exceptions
      not_found          = 1
      wrong_type         = 2
      others             = 3.
PS please make a whereused of this fm , how it has been used in LDB's to get dynmic selection values
a®

How to extend dynamic selection for Logical Database PNPCE

Hi All,
I need to extend dynamic selection for Logical Database PNPCE. Can someone able to help with steps?
Thanks
Ranjith

Hi All,
I need to extend dynamic selection for Logical Database PNPCE. Can someone able to help with steps?
Thanks
Ranjith

Pagination support for non-Oracle databases?

Hi,
I just read this thread (Pagination Support on pagination support. Is there any way to get pagination with non-Oracle databases? We are using an IBM iSeries / AS/400 DB2 database right now, and we're planning to use some local lightweight database in the near future as well (probably Cloudscape/Derby or "IBM Everyplace database".)
We currently use code like this:
String sql = "SELECT art FROM Artikel art" +
            /* dynamically generated where statement is added here */
            + "ORDER BY art.artikelNummer";
Query q = em.createQuery(sql);
q.setFirstResult(firstResult);
q.setMaxResults(maxResults);If I look in the TopLink logs, I see queries like this:
SELECT ARTNR, ARALT, ARAFJ, ARXII, ARAVJ, ARXIV, ARANJ, AHGCD, ARNVJ, ARCRJ, ARARK, ARFKJ, ARTNK, ARGP1, ASGCD, ARGP2, ARPR1, ARGP3, ARPR2, AREX1, ARPR3, AREX2, ARPR4, AREX3, ARASA, ARINA, ASSCD, ARIA1, ARBAN, ARIN1, ARBAV, ARIA2, ARBAK, ARIN2, ARCES, ARIA3, ARCDT, ARIN3, ARCRE, ARIA4, ARCWK, ARIN4, ARHBH, ARIA5, ARDFA, ARIN5, ARDFG, ARIA6, ARDOS, ARIN6, AREPW, ARINN, ARFOD, ARIAS, ARFOE, ARINS, ARFOF, ARNAB, ARFOI, ARNIB, ARFON, ARNIA, ARFOS, ARNN1, ARFTA, ARNA2, ARVIV, ARNO2, ARGAP, ARNN3, ARGPT, ARNA4, ARGPD, ARNO4, ARGPA, ARNN5, ARGPO, ARNA6, ARHIS, ARNN6, ARISP, ARNIO, ARKHM, ARNNS, MAGCD, AROVJ, MTGCD, ARPL1, ARMXM, ARPL2, MRKCD, ARPL3, ARMVR, ARVKJ, ARMIM, ARV12, ARMDT, ARVVJ, ARMTE, AR#VR, ARMTU, ARZLS, ARMTM, ARIAT, ARMWK, ARAVS, MPCCD, ARNVS, ARBTW, ARFJS, ARXI2, ARG2S, ARXI3, ARE1S, ARXI4, ARE3S, ARXI6, ARIB1, ARXI1, ARIB2, ARXI5, ARIB3, AROPI, ARIB4, ARPRV, ARIB5, SZGCD, ARIB6, ARSPC, ARINO, ARSMF, ARIOS, VEAAN, ARNIS, ARSYN, ARNO1, ARVR1, ARNA3, ARV1S, ARNN4, ARVR2, ARNO5, ARV2S, ARNIN, ARVR3, ARNOS, ARV3S, ARP1S, ARTFA, ARP3S, ARTFG, ARS12, ARUVC, ARZLD, ARUCW, ARAJS, ARBKV, ARCJS, ARVVI, ARG3S, ARVVP, ARINB, VPOCD, ARIO2, VPECD, ARIO4, ARVIH, ARIO6, ARVHG, ARNBS, ARVRW, ARNN2, ARVPR, ARNA5, ARVVR, ARNAS, ARVVS, ARP2S, ARVV1, ARSVV, ARZK1, ARNJS, ARNA1, ARNO3, ARIO1, ARNO6, ARIO5, AROJS, ARE2S, ARVJS, ARIBS, ARIAD, ARIO3, ARG1S FROM ART WHERE ((((ARUVC = 'N') AND (ARHIS = 'N')) AND (ASGCD = 7)) AND (AHGCD = 15)) ORDER BY ARTNR ASC
(Yeah, I know we have too much columns in the table...)
So, no pagination in the query. As you can see, we have a mechanism in place to dynamically generate a where clause. This is because the user can set filters. The problem is, if our user sets a filter that causes the result set to be significantly smaller, the performance is way better than when he sets no filter at all. We suppose this is because the whole result set is sent to TopLink, regardless of the values of firstResult and maxResults.
We are using TopLink Essentials 2.1-10, by the way.
Message was edited by:
Bart Kummel

Hi all,
I'm trying to subclass <tt>DatabasePlatform</tt> to add pagination support for the AS/400 DB2 database of my customer. To be fair, it is not going very well so far.
The first problem is, the query Chris found by googling (Re: Pagination support for non-Oracle databases?), does not work for AS/400s version of DB2. In fact, although it is called "DB2", the database on the AS/400 system is a whole other database than the "normal" DB2 database that runs on Windows and *nix. The AS/400 DB2 simply does not have a "ROW_NEXT" function.
Another option would be to use the <b>row_number() over()</b> mehtod. But, as can be read here, this function is only available from version V5R4 of OS/400. And guess what? We're stuck on V5R3 at this client. (We cannot upgrade, because there's an application in use that's written in Delphi and IBM dropped the Delphi binding from V5R4...)
So I pretty much ran out of options. On the mailing list I linked to above, someone mentions the option to make a sort of stored procedure that generates a row count number. An example of how to do this can be found here. I implemented it, and ended up with this code:
package com.myclientsname.persistence;
import java.sql.Connection;
import java.sql.PreparedStatement;
import java.sql.ResultSet;
import java.sql.SQLException;
import org.eclipse.persistence.expressions.ExpressionBuilder;
import org.eclipse.persistence.internal.databaseaccess.DatabaseCall;
import org.eclipse.persistence.internal.expressions.ExpressionSQLPrinter;
import org.eclipse.persistence.internal.expressions.SQLSelectStatement;
import org.eclipse.persistence.internal.sessions.AbstractSession;
import org.eclipse.persistence.logging.SessionLog;
import org.eclipse.persistence.platform.database.DatabasePlatform;
import org.eclipse.persistence.sessions.SessionProfiler;
public class AS400Platform extends DatabasePlatform {
    private static final long serialVersionUID = 0L;
    public AS400Platform(){
         super();
         super.setShouldBindAllParameters(false);
    public void printSQLSelectStatement(DatabaseCall call, ExpressionSQLPrinter printer, SQLSelectStatement statement) {
        int max = 0;
        int firstRow = 0;
        if (statement.getQuery()!=null){
            max = statement.getQuery().getMaxRows();
            firstRow = statement.getQuery().getFirstResult();
        if ( !(max>0) && !(firstRow>0) ){
            super.printSQLSelectStatement(call, printer,statement);
            return;
        } else {
            statement.setUseUniqueFieldAliases(true);
            ExpressionBuilder builder = new ExpressionBuilder();
            statement.addField(builder.getField("COUNTER() AS CNTR"));
            printer.printString("SELECT * FROM (");
            call.setFields(statement.printSQL(printer));
            printer.printString(") AS R WHERE R.CNTR >= ");
            printer.printParameter(DatabaseCall.FIRSTRESULT_FIELD);
            if ( max > 0 ){
                // Use of binding parameters is not allowed here, so use
                // String concatenation instead...
                printer.printString(" FETCH FIRST " + max + " ROWS ONLY");
        call.setIgnoreFirstRowMaxResultsSettings(true);
    public boolean wasFailureCommunicationBased(SQLException exception, Connection connection, AbstractSession sessionForProfile){
        if (connection == null || this.pingSQL == null){
            //Without a connection we are unable to determine what caused the error so return false.
            //The only case where connection will be null should be External Connection Pooling so
            //returning false is ok as there is no connection management requirement
                //If there is no ping sql then we can not perform the ping.
            return false;
        PreparedStatement statement = null;
        try{
            sessionForProfile.startOperationProfile(SessionProfiler.ConnectionPing);
            if (sessionForProfile.shouldLog(SessionLog.FINE, SessionLog.SQL)) {// Avoid printing if no logging required.
                 sessionForProfile.log(SessionLog.FINE, SessionLog.SQL, getPingSQL(), (Object[])null, null, false);
            statement = connection.prepareStatement(getPingSQL());
            ResultSet result = statement.executeQuery();
            result.close();
            statement.close();
        }catch (SQLException ex){
            try{
                // Had to add this check because of NullPointerExceptions
                // (maybe a bug?)
                if(statement != null){
                    //try to close statement again in case the query or result.close() caused an exception.
                    statement.close();
            } catch (SQLException exception2) {
                //ignore;
            return true;
        }finally{
            sessionForProfile.endOperationProfile(SessionProfiler.ConnectionPing);
        return false;
}(As you can see, I had to override the <tt>wasFailureCommunicationBased()</tt> method as well, due to some unexpected NPE's. (A bug, perhaps?))
This code does work. However, the performance is not very well. The first page comes relatively fast, but as you browse further in the table, each page comes slower. I assume this is because the counter() method has to be evaluated for each row in the table.
I have to get the performance better and constant. Does anyone have an idea how to optimize this further?
Best regards,
Bart Kummel

Dynamic selections for the FBL5N report

Hi Experts,
Can any body help how to add the account assignment group field in dynamic selections for the FBL5N report.
rgds / Srini

Hi Alex,
Thanks for your quick response, here for the report FBL5N the logical database is DDF and the field which should be add in dynamic selection is (KTGRD) account assignment group is available in KNVV table but this table is not available in DDF logival database.
Please suggest us how we can pickup this field into the report FBL5N for dynamic selections.
regards / Srini

Dynamic Selections for the F.42 report

Hii Experts,
I want to add a field called Business Place(BUPLA) in dynamic Selection in tcode F.42.
So, in F.42 KDF Logical Database is used, so i make a Custom Selection view for KDF database.
Business place is successfully added in Dynamic Selection, but it doesn`t reflect when i execute F.42.
When i test from SE36, it reflects.
Nitin Garg

Note 50370 explains in full detail how the system works for selecting the documents with dynamic selection.
Balance report reads the transaction figures which are stored with the help of several different fields, so the selection according to further fields cannot be proceed. This is standard design.
The dynamic selection for Document Data does not work for reports which use customer / vendor transaction tables (KNC1 LFC1),i.e., document data like doc.number and Doc.date is not stored in transaction tables.
Dynamic selections can only be used with customer / vendor, company code
or fiscal year fields. The following reports are affected by this
program design.
S_ALR_87012186 - Customer sales
S_ALR_87012082 - Vendor Balances in Local Currency
S_ALR_87012093 - Vendor Business
S_ALR_87012079 - Transaction Figures: Account Balance
S_ALR_87012080 - Transaction Figures: Special Sales
S_ALR_87012081 - Transaction Figures: Sales
S_ALR_87012105 - List of Down Payments open at Key Date - Vendors
S_ALR_87012172 - Customer balances in local currency
RFKSLD00 - F.42
RFDSLD00 - F.23
Hope this clarifies.
Kind Regards
Soumya

Selection-screen dynamic selections for dtab

Hey experts,
when I add this to my code
selection-screen dynamic selections for zbr_t_autori
and I want activate it, it writes out an error
The addition "DYNAMIC_SELECTIONS" is only allowed in INCLUDE DB__SSEL.
and I don't know how to solve it, what is that include db__ssel?
Can anybody help me.
Regards,
Robert

Check this:
Structure of Logical Databases - ABAP Programming (BC-ABA) - SAP Library
Where are you using this code?
selection-screen dynamic selections for zbr_t_autori
It should be in the include reserved for your LDB selection:

How to get the selection parameters from logical database into one of the t

Hi Sap ABAP Champians,
How to get the selection parameters from logical database into one of the tab in the tabstrip selection-screen.
Please help me for this
Thanks
Basu

Hi
Thanks, that will work, but then I'll have to insert code into all my reports.
I can see that "Application Server Control Console" is able to rerun a report.
This must mean that the Report Server has access to the runtime parameters.
But how?
Cheers
Nils Peter

How to suppress the Selection Screen of Logical Database

Hi,
I am using one Logical Database for my report.
I want to show my customized selection Screen.
How can I hide the Selection Screen of Logical Database?

Hi,
Check the attributes of the report program where you assign the LDB. You can see the parameter Selection Screen press the F4 and check the LBD is provided any Blank screen or not.
For some LDB's you can find the Report Category in the attribute section of the report. either you can create the new screen or standard screen might be provided with Blank.
Check there ..
If you don't find you can use LOOP AT SCREEN..ENDLOOP to hide the fields of LDB.
Which LDB you are using.

How to hide some select-option of Logical Database in report?

How to hide select-option of Logical Database in report?eg . In Logical Database 'PNP' , my code is 'GET PERNR' , excute the report , select-screen is displayed . I want to hide some select-options , such as PNPPERNR-LOW .
Edited by: rongrong wang on Mar 26, 2008 9:31 AM

U need to write code in initialization as
initialization.
loop at screen.
if screen-name = 'PNPPERNR-LOW'.
screen-active = '0'.
modify screen.
endif.
if screen-name = 'PNPPERNR-HIGH'.
screen-active = '0'.
modify screen.
endif.
endloop.

How to pass a default value in selection screen of logical database pnpce

Dear All,
Can any one tell me how to pass a default value in selection screen of logical database pnpce .
Regards
Rakesh Singh

Hi Rakesh,
Go to SE36 (logical database Builder).First enter PNPCE in Logical Database and press documentation,here you will get the details of exactly what is PNPCE and how it works.After that select selections in subojects in se36 only and enter display ,there you have the include from where you acn get the idea.
Regards,
Rahul

Can Jdeveloper Be Used For Non-Oracle Databases

I have been trying to evaluate Jdeveloper 9i and Jbuilder 7 Enterprise for Swing database development. I am particularly interested in the productivity enhancements such as BC4J and Jclient. The underlying database might be Oracle, SapDb (excellent, easy to use, and free), SQLServer, etc.
I evaluated Jbuilder Enterprise tools and it worked flawlessly with SapDb. This emphasized using their DataExpress and DbSwing components which provide many useful capabilities similar to BC4j and Jclient. It also involved using their DBPilot tool which allows browsing similar to that provided via a Jdeveloper connection.
I tried to use Jdeveloper for the same SapDB and it is essentially non-functional. I followed the instructions for using a non-default driver and tried to define a connection. It behaved inconsistently: often saying no suitable driver can be found and yet when you edit the connection and test without making any changes, it works. If you try to establish a BC4J definition, it is very inconsistent and fails to recognize important details as foreign keys. Even if you define a ViewLink manually, it still does not work properly if you attempt to define a Master-Detail Jclient form. As I have stated, all these types of capabilities worked flawlessly in their Jbuilder equivalent. Furthermore, I really like the fact that Jbuilder gives many of BC4Js benefits without needing a BC4J J2EE container.
Has anyone had real success using Jdeveloper's advanced features to develop for non-Oracle databases and if so, how did you get around these types of problems?

Hi,
generally, SCAN can be used for 10g databases and you discovered the first half: for 10g databases you will have to modify the REMOTE_LISTENER entry for each 10g database instance to point to the SCAN listeners (as opposed to pointing to the remote local listeners, which is the default in 10g). You could even have the databases registers themselves with SCAN and the remote listeners, if you wanted to... It's more or less a matter of configuration. But for simplification reasons, I will stick to the case where you have your 10g databases register with the SCAN listeners only.
Now the other half is the client and the client configuration. An 11g Rel. 2 client configured for RAC would have a TNSNAMES entry that has only one address line for the RAC databases. The host entry in this one address line should point to the SCAN (the SCAN name is ideally resolved in DNS). A 10g client configured for RAC would have as many address lines in the TNSNAMES as you have nodes in the cluster.
The 10g client SCAN configuration would then be in the middle so to speak: You would have 3 address lines in your TNSNAMES, in which each host entry would resolve to one SCAN address (I assume you will use the recommended default of 3 SCAN IPs). If you choose, you can have a name resolution for each of your SCAN IPs, but this would not be required. Now, why would you do it this way? Because this configuration will always work and does not make you dependent on certain functionality that your DNS server may or may not offer.
For the remaining questions: SCAN is a DNS entry resolving one name to more than one (typically 3) IP addresses. OID is short for Oracle Internet Directory, which is a complete LDAP server. And you are right that there is no document how to configure 10g clients for SCAN from Oracle yet. However, there is a quite good document on SCAN on otn.oracle.com/rac, but I am sure you are aware of it already.
Hope that helps. Thanks,
Markus

How to display selection screen of logical database on a screen

Hi Experts,
I create a screen 100, how do I display a selection screen of logical database on this screen.
Thanks!
Anthony

hi
if u are making HR report then goto attribute -> Logical database -> write PNPCE to create in build selection scree.
regards,
Abhilash

Dynamic Selection for non-logical database

Similar Messages

Maybe you are looking for