Dynamic selection in s_alr_87012079 not working.

Dear All,
Dynamic selection for Standard FI report S_ALR_87012079 seems not working properly. When users here are specifying period range in dynamic selection , all the data is being fetched.
I searched the forum and found the following link , but its unanswered.
[Dynamic Selection in S_ALR_87012079;
Do i need to copy the program and do any customized coding or any other options.
Thanks n regards,
Sij.

Hi Sij,
1) Go t se36 and before that you have t get logical database name 2) From there go to menu and check the views 3) Take the view and click on chnage 4) Get the exact node which one you need and check the fields .In the same way you can add function groups also and then save.This is did for s_alr_87011990 report with custom fields.You can try and see.
Regards,
Madhu.

Similar Messages

Dynamic Selection on report not working

Dear all,
I have several reports on which the dynamic selection is not working. For instance, the report CN43N. The report is outputting all data in a year i.e it is disregarding the condition I specified in the dynamic selection fields.
Is there some configuration to make to this report so that the dynamic selection works?
Thanks for ur help.
Nas

Also Nelmaz,
I have just checked OSS notes and found below note helpful to you:
Note 1059465 - CN43N: Dynamic selections for scheduling data of WBS elemnts
Symptom
You cannot use transaction CN43N to create dynamic selections for scheduling data of WBS elements (table PRTE). You can use transaction CNS43 to do so.
Hope this helps.
Please assign points as way to say thanks

Added field to dynamic selection screen does not work in FBL5N

hi,
we have added KNA1-KATR5 to the selection screen of FBL5N by using logical database DDF using "view CUS" but it does not work.
Our system is 6.0
is there any OSS note or program that we should add?
many thx.

Refer This:
Additional field selections in FB03

Select() function is not working properly in solaris 10.

Hi ,
We are facing an issue with select() in Solaris 10. we had written a sample program to this issue.
Program name :- sel.cpp
int main()
struct timeval sleeptime;
sleeptime.tv_sec = 60;
printf("1\n");
select(0,NULL,NULL,NULL,&sleeptime);
printf("2");
return 0;
When i run this program in Solaris 9, its printing 1 and after one minute its printing 2.
When i run this program on Solaris 10, its printing 1 and 2 without waiting for 60 seconds.
When i tried to print tv_usec, its printing as 0 in solaris 9 and some garbage values in solaris 10.
I think because of that the above select function is not working properly in solaris 10.
Why the tv_usec is not taking 0 as default values in Solaris 10?
We are using our legacy code for past 20 years. So, before going to do any changes we are trying to find why this happenig like this.
Thanks a lot.
Regards,
Srikanth.

haisrig wrote:
Hi ,
We are facing an issue with select() in Solaris 10. we had written a sample program to this issue.
Program name :- sel.cpp
int main()
struct timeval sleeptime;
sleeptime.tv_sec = 60;
printf("1\n");
select(0,NULL,NULL,NULL,&sleeptime);
printf("2");
return 0;
When i run this program in Solaris 9, its printing 1 and after one minute its printing 2.
When i run this program on Solaris 10, its printing 1 and 2 without waiting for 60 seconds.
When i tried to print tv_usec, its printing as 0 in solaris 9 and some garbage values in solaris 10.
I think because of that the above select function is not working properly in solaris 10.
Why the tv_usec is not taking 0 as default values in Solaris 10?
We are using our legacy code for past 20 years. So, before going to do any changes we are trying to find why this happenig like this.Hi
It sounds to me that you've been lucky for 20 years then.
Local POD variables on the stack that aren't explicitly initialized can contain any value. Here's what I see in your app with dbx
(dbx) run
Running: sel
stopped in main at line 9 in file "sel.cpp"
    9      sleeptime.tv_sec = 60;
(dbx) print sleeptime
sleeptime = {
    tv_sec = -4198732
    tv_usec = 0
}That's on a Solaris 10 SPARC machine. If I try it on a Solaris 10 x86 box then I get
(dbx) print sleeptime
sleeptime = {
tv_sec = -830490588
tv_usec = 134510556
and I see the behaviour that you describe.
Paul

Select query is not working in BDC Program

Hi,
I am working in BDC for update valuation class for T-code mm01.Actually In this BDC i am using two recoding based on material type.
i am using two internal table : I_DATA and ITAB
Use I_DATA to hold excle data in which material No, plant , valuation type , valuation No. and ITAB for material No, material type Only.
So, i am fetching material Type ( MARA-MTART ) through select query. But Select query is not working. and also i did check MARA table according that Material Number then material no. exit in Mara Table.
Note : at run time I_DATA have 1 row but ITAB have 0 row ....
DATA: BEGIN OF I_DATA OCCURS 0,
MATNR TYPE MARA-MATNR,
WERKS TYPE MARC-WERKS,
BWTAR TYPE RMMG1-BWTAR,
VERPR TYPE BMMH1-VERPR,
BKLAS TYPE MBEW-BKLAS,
STATUS TYPE C,
END OF I_DATA.
DATA : BEGIN OF ITAB OCCURS 0,
MATNR LIKE MARA-MATNR,
MTART LIKE MARA-MTART,
END OF ITAB.
Loop at I_DATA.
select matnr mtart from mara into table itab where matnr = I_DATA-matnr.
endloop.
Guide me..........

If you use your
Loop at I_DATA.
select matnr mtart from mara into table itab
    where matnr = I_DATA-matnr.
endloop.
At end of loop, itab will only contain the result of the last select, so use a
Loop at I_DATA.
select matnr mtart from mara APPENDING table itab
    where matnr = I_DATA-matnr.
endloop.
better
if I_DATA[] is not initial.
select matnr mtart from mara into table itab
    FOR ALL ENTRIES IN i_data where matnr = i_data-matnr.
endif.
Some Remarks
- If actually required (where does I_DATA come from, is it an external format, you need the internal value to use in SELECT statement), check via SE11 the correct [conversion exit|http://help.sap.com/saphelp_nw04/helpdata/en/35/26b217afab52b9e10000009b38f974/content.htm] associated with domain MATNR (Is it truly ALPHA, and not something like MATN1, so [CONVERSION_EXIT_MATN1_INPUT|http://www.sdn.sap.com/irj/scn/advancedsearch?query=conversion_exit_matn1_input])
- You could try to use BAPI like [BAPI_MATERIAL_SAVEDATA|http://www.sdn.sap.com/irj/scn/advancedsearch?query=bapi_material_savedata] and not BDC
Regards,
Raymond

Extension in Select-Options is not working

Hi,
The extension of select-options is not working for the following statement........
SELECTION-SCREEN: BEGIN OF BLOCK sel WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_tp_no FOR e070-trkorr.
SELECTION-SCREEN: END OF BLOCK sel.
Please Help.......
Thanks,
Sheel

SELECTION-SCREEN: BEGIN OF BLOCK sel WITH FRAME TITLE text-001.
SELECTION-SCREEN: END OF BLOCK sel.
Remove the colan ':' from ur code after SELECTION-SCREEN
write it as
SELECTION-SCREEN BEGIN OF BLOCK sel WITH FRAME TITLE text-001.
SELECTION-SCREEN END OF BLOCK sel.

Dynamic drill link is not working when i substitute some parameters in Plus

Hi Gurus,
Dynamic drill link is not working when i substitute some parameters in Discoverer plus(Tools--->Manage Links--->Edit links--->Parameters options), when i substitute some parameters it working when i click on drill value the link is popping up to go another worksheet.For some parameters link is not popping up. Could you please give any ideas.
Thanks & Regards
Vikram

Hi Vikram
Oh gosh, me and my big mouth!
Patch 5381032 has two references to issues with links. You might want to discuss your scenario with Oracle and ask them if this patch would resolve your issue.
Another solution would be to upgrade to 10.1.2.2 (available as a patch on MetaLink) which has most of the fixes from all of the patches applied. Again I would advise you speak with Oracle Support as they are the only one who can actually confirm whether this particular issue was fixed in this release.
Are you by any chance seeing zero numbers display as 00 and are you seeing any graying out of icons? If so, then patch 5345595 (sometimes referred to as 5345528) fixes this and is a good patch to apply if you haven't already done so.
All of these patches require a password which can only be obtained from Oracle by raising a service request to Support and stating the issues that you have.
Hope this helps
Regards
Michael

Select button will not work

My 2gb nano's select button will suddenly not work. The rest of the clickwheel and buttons work find, but not the center select button.
I restored it to original settings. Then after it restarts, you have to select a language. The select button would still not work, but then I slid the "hold" button back and forth and the select button worked to allow me to chose a language. But at the next screen of options (Music/Photos/Extras, etc.) the select button will again not work. Sliding the hold button back and forth doesn't work. I cannot do a menu+select reset because I can't get the select button to respond.
I have made sure that I have the most updated softward for the nano.
Any suggestions?

My select button has not worked for a loong time.. It will occasionally work if I press for long enough or hard enough.. but not very often. This seems to be a common enough problem so there should be a way to fix it..I hope..

Why select query is not working?

CREATE OR REPLACE TYPE prod_type AS OBJECT (
pid INT,
pprice NUMBER,
MEMBER PROCEDURE display(pid IN NUMBER));
create table prod of prod_type (pid primary key);
CREATE OR REPLACE TYPE deal_type UNDER prod_type (
ctr NUMBER,
OVERRIDING MEMBER PROCEDURE display (pid IN NUMBER),
insert into prod values(deal_type(101, 4, 1));
insert into prod values(deal_type(102, 5, 0));
------below given select query is NOT WORKING ---------
select ctr from prod p where p.pid=101;
Thanks,
-Nid

------below given select query is NOT WORKINGWondering how you inserted data ...
SQL> CREATE OR REPLACE TYPE prod_type AS OBJECT (
2 pid INT,
3 pprice NUMBER,
4 MEMBER PROCEDURE display(pid IN NUMBER));
5 /
Type created.
SQL>
SQL> create table prod of prod_type (pid primary key);
Table created.
SQL>
SQL> CREATE OR REPLACE TYPE deal_type UNDER prod_type (
2 ctr NUMBER,
3 OVERRIDING MEMBER PROCEDURE display (pid IN NUMBER),
4 );
5 /
Warning: Type created with compilation errors.
SQL> sho err
Errors for TYPE DEAL_TYPE:
LINE/COL ERROR
4/1      PLS-00103: Encountered the symbol ")" when expecting one of the
         following:
         , not pragma <an identifier>
         <a double-quoted delimited-identifier> final instantiable
         current order overriding static member constructor map
SQL> CREATE OR REPLACE TYPE deal_type UNDER prod_type (
2 ctr NUMBER,
3 OVERRIDING MEMBER PROCEDURE display (pid IN NUMBER));
4 /
Warning: Type created with compilation errors.
SQL> sho err
Errors for TYPE DEAL_TYPE:
LINE/COL ERROR
1/1      PLS-00590: attempting to create a subtype UNDER a FINAL type
SQL>You made an attempt to create a subtype UNDER a FINAL type - that the reason why can not work ...
Avoid deriving a subtype from this FINAL type.
HTH

Select list pagination not working for big tables

Hi,
i am trying to view a table with large amount of data using tabular form. the pagination using select list is not working in this page. i have selected select list kind of pagination but it is showing "row range 1-15 16-30(with set pagination)' type of pagination. when i lowered the amount of data in the table the pagination type will automatically change to select list pagination. could you please tell me why this happens and any possible work around if any.
Thanks,
Jo

Hi Jo,
I don't know what you call a large amount of records, but the effect you describe might be intentional by apex.
The select list pagination would generate a selection tag with (number of records in table/15) options in your page HTML.
Although there isn't a hard limit to the number of options a select list can have there certainly is a limit to what your browser/pc can render.
Think about it
Let's say you table contains a million rows. this would result to a select list with 66666 options. Which your browser won't handle :)
I very possible the apex team resolved this by simply reverting to row range pagination when the number of select options would grow to large.
Geert

SELECT DISTINCT does not work - Another Problem!

Dear All
Previous Post
I just posted a thread, which has been answered by an expert. It's here:
SELECT DISTINCT does not work. Why?
My original problem was that the Query returned duplicate records, and SELECT DISTINCT did not work.
The solution was to change this select:
T0.[U_SupInv]      AS 'Link'
... to this:
CAST(T0.[U_SupInv] as nvarchar(100))      AS 'Link'
The amended Query worked.
New Problem
I just discovered that resolving the problem created a new one.
The field U_SupInv (Link) is in fact a UDF.
I created it so that all Suppliers' Invoices could be Scanned to pdf files, and these pdf could be linked
to the respective AP Invoice.
Originally, when I clicked 'Link' in my Query results, the pdf scan pops up.
When the Query is amended by adding CAST, the link becomes dead.
Help
Could anyone tell me how I can make SELECT DISTINCT work, as well keeping the LINKS live?
The main purpose of my Query is to help users view the pdf scans by clicking on the links.
Thanks
Leon Lai
Here's my Original Query
SELECT
T0.[UpdateDate] AS 'Update Dt',
T0.[TaxDate] AS 'Doc Dt',
CASE T5.[TransType]
     WHEN '18' THEN 'PU ' + CONVERT(VARCHAR(6), T0.[DocNum])
     WHEN '19' THEN 'PC ' + CONVERT(VARCHAR(6), T0.[DocNum])
END 'SAP Ref.',
T1.[ImportLog]     AS 'Ship #',
T0.[CardCode] + '' AS 'Supplier #',
T0.[CardName]      AS 'Supplier Name',
T0.[DocTotal]      AS 'Rs',
T1.[BlockNum]      AS 'Reqn #',
T0.[DocNum]        AS 'Doc No',
T0.[U_SupInv]      AS 'Link'
FROM klship.[dbo].[OPCH] T0
INNER JOIN klship.[dbo].[PCH1] T1 ON T0.[DocEntry] = T1.[DocEntry]
INNER JOIN klship.[dbo].[OJDT] T5 ON T0.[TransID] = T5.[TransID]
WHERE
(T0.[UpdateDate] >= '[%2]' AND
T0.[UpdateDate] <= '[%3]' AND
T0.[U_SupInv] IS NULL)
OR
(T0.[UpdateDate] >= '[%4]' AND
T0.[UpdateDate] <= '[%5]' AND
T0.[U_SupInv] IS NOT NULL)
FOR BROWSE

Dear István Korös,
Thanks a lot for your answer.
I will test your suggestion tomorrow, as it's night and I am returning home now.
However, I do not think it will suit my requirements for the foll reasons:
- I worked hard to get rid of the need to enter anything in the @Scan2 field.
- This UDF was created solely as a text of instruction for my staff.
   Unfortunately I had to fill in something to make the Query work.
- The problem is that if the user forgets to click the drop-down arrow and leaves @Scan2
   blank, the query does not work.
- With the help of another expert, I succeeded in ignoring @Scan2 altogether.
- I posted only a simplified version of my Query on the forum, without the codes relating to eliminating the
need to enter something in @Scan2, so you may not be aware of my requirement.
- I hope you understand my reluctance. But I will try your suggestion nevertheless.
My Suggestion
I think using PCH1.VISORDER may be the solution.
If we select only those rows where visorder = 0, then
   - there will be no duplication
   - I need not use SELECT DISTINCT
   - All my LINKS to pdf files will be live because I need not use CAST
   - I may retain that part of my Query which permits ignoring @Scan2 altogether.
- A Dream!-
The problem is that I don't know how and where to place that VISORDER.
If you think I may be right, could you help me along that line?
Best Regards
Leon Lai

Multi-select LOV does not work in forms

the multi select LOV does not work in the form.
the LOV works individually but in the form it does not work. it does not allow multiple selection from the list.
is there a workaround for this or is this a bug ...?
any ideas ...?
thanx a lot.
null

Right, we cannot store more than one value in a single column in a table :), we were getting a lot of requests to support multiple select LOVs but requirements were contradictory if not mutually exclusive.
The only sense it makes is when used together with user-defined object types (nested tables for example) but the current [application building]infrastructure we have does not support this. However, we are looking into this and this feature maybe implemented in a future release.

Double click select all does not work in web site's search area after going back.

After updating from Firefox ESR v24.8.1 to v31.20 double click select all does not work in a search area after going back or searching again with the same input. It happens before clicking search icon and searching for something else double click select all does not work except it works for one word that's all.
This issue is with all new Firefox ESR and None ESR I have tried. Also the issue is on all web sites like www.softpedia.com for example.

Bugzilla has a different login system, unfortunately.

"Select Color Range" not working. "Warning: No pixels were selected" returned when attempting to use. Using Photoshop CS6 on a Mac running OS X Yosemite

"Select Color Range" not working. "Warning: No pixels were selected" returned when attempting to use. Using Photoshop CS6 on a Mac running OS X Yosemite

Here are three screenshots in succession from trying to perform the color selection:
Dropbox - Screenshot 2015-02-12 14.57.40.png
Dropbox - Screenshot 2015-02-12 15.00.14(2).png
Dropbox - Screenshot 2015-02-12 15.01.00.png

Zen Micro 5gb - Playlist on the fly with "add to selected" often does not work (AD HOC 'playlis

I've found ad-hoc playlist made from ADD TO SELECTED often does not work. Here are other issues:?. Does not add? at all OR only adds after first song selected played2. Cannot swith from ARTISTS to SONGS w/o killing list. This will kill the ongoing list.3. If I make mistake and hit the PLAY button, it wipes out the entire list I'd already made. Any of these issues resolved in Zen Vision M?

try reloading the firmware and if that doesnt work try opening the case and cleaning it if there is anything in there. the button may be stuck. and if that doesnt work i dont know what else to sugjest. it seemed to work for me.

Dynamic selection in s_alr_87012079 not working.

Similar Messages

Maybe you are looking for