Dynamic Selection Screen Fields

Hi All,
I have made a copy of the program FI_RFSOPO00. This report uses dynamic selection screen. I wanted to know the names of these dynamic selection screen. As I have to make some database selections based on the user entries in these fields.
Is there a way to find this out?
Regards,
Stephen

Hi Stephen,
1) FI_RFSOPO00 is unknown- i think you mean RFSOPO00
2) RFSOPO00 uses logical datbase SDF, which uses
free or dynmaic selections from the tables ska1,skb1
and bsis.
see F1 to SELECTION-SCREEN DYNAMIC SELECTIONS FOR TABLE dbtab and ta SE36 to SDF too.
regards Andreas

Similar Messages

Specific criteria in dynamic selection screen.

Hi experts.
I have a requirement to build dynamic selection screen fields. For these I would like to use FREE_SELECTIONS_INIT and FREE_SELECTIONS_DIALOG function modules.
The problem is that all fields could be single field or as a range... Is there any chance to make specific fields (DATS) as a single field and others as a range ?
Thanks a lot.
Daniel.

yes
you need to pass fields in parameter FIELDS_TAB of function FREE_SELECTIONS_DIALOG
in this structure you have the field type P or S

How to add a new Field in the Dynamic Selection screen section.

HI,
There is a requirement in which I need to add a field in existing program of dynamic selections.
I need to add a field KNKK-DBRTG (Customer Rating) in dynamic selections screen of some existing report
which has a dynamic selection screen with other fields like customer account, company code etc. Along with this i need to add Customer rating field also in the selection screen.
I have used GET KNKK statement to select this in the Dynamic selection screen. But I need to make it appear
on the screen.
LDB used is the Customer Database.
I have added GET KNKK statement after GET KNA1 statement.
Can any one help me how we can make this rating field appear in the selection screen.
With the GET statement Credit control area Fields can be selected in the selection screen but I have to permanantly add the field in the selection screen.
Regards
Prashant Prabhu

Hi,
So you need that this new field have data in old records?
1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
2.- If condition "1" is not yours.
First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
Hope it helps. Regards, Federico

Exclude one field from Logical Database's dynamic selection screen

Hi Guru,
I have a requirement to amend a program to exclude the document number field (bsik-belnr) from the dynamic selection-screen of the logical database KDF(Vendor Database) so that the program will not filter according to the document number.
I have use the below syntax in my zprogram.
selection-screen exclude select-options: doc-no.
However I get syntax error "The addition EXCLUDE is only allowed in INCLUDE DBKDFSEL".
Please advice.
Best Regards,
Fung

The selection part of the logical database defines input fields for selecting data.
 The runtime environment displays these on the selection screen when you run an executable program linked to the logical database.
 Include called DB<ldbname>SEL.
 SELECTION-SCREEN BEGIN OF VERSION ver TEXT-xxx.
 SELECTION-SCREEN EXCLUDE ... .
 SELECTION-SCREEN END OF VERSION ver.
Defines a selection screen version (with a three-character name ver ). Between BEGIN OF VERSION and END OF VERSION , you can exclude selection screen objects for the version ver , i.e. remove them from the selection screen with SELECTION-SCREEN EXCLUDE.
 SELECTION-SCREEN DYNAMIC SELECTIONS FOR TABLE dbtab
If one of these tables is active in the report (i.e. it is declared under TABLES or lies somewhere on the path from the root of the database hierarchy to a table declared with TABLES ), a pushbutton called 'Dynamic selections' appears on the selection screen.

Adding a BSEG field to the FB03 dynamic selection screen

Hello,
We have a requirement wherein we want to add a field from BSEG in the dynamic selection screen of FB03.
We found that the logical database behind this is BRF. So we created a u2018CUSu2019 selection view for the logical database and added the field from BSEG to the functional group
and checked the checkbox u201CPreselectu201D for it to appear automatically in the FB03 screen.
But we still couldnu2019t see the field in FB03 dynamic selection.
On analysis, we found that only tables are that are defined in the nodes (Extras  Selection views) can be used to create the dynamic selection and BSEG was not available
as one of the node. So we added BSEG as one of the node by adding the below code to the SELECTION of the logical database.
SELECTION-SCREEN DYNAMIC SELECTIONS FOR TABLE BSEG.
Even after that, we couldnu2019t see the field from BSEG in the dynamic selection.
Are we missing anything here?
I see many threads here on similar lines but no one has posted the exact step. Any help is highly appreciated.
Thanks a lot.
Regards,
Suganya

Hi
If you want to take the line item details than you can refer these t-codes rather than customizing.
S_AC0_52000887 - Receivables: Profit Center
S_AC0_52000888 - Payables: Profit Center
S_ALR_87012332 - G/L Account Statements
Here by using the dynamic selection you can get the results. Use object list display and select the layout for more fields.
Thanks

Dynamic selection screen fetching the value from table fields

hi gurus,
i have one table say ztable...and i should create a dynamic selection screen which should populate the selection screen by the table field names.
example..if i have 3 fields im my table..my selection screen should have three selection option fields..and in future if i add one more field in my table it should automatically create another slection-option in selection screen..
thanks
Sudheer

Do you mean like SE16 works. If so, you should notice that if you amend the selection fields, the screen program is actually re-generated.
That is what is happening. A program is being created and re-generated.
To create a dynamic selection screen in a single program is not possible ( I may be wrong ). If it is possible, then you would have problems in defining selection screen field names and using them.

Add certain field at dynamic selection screen in FBL3N transaction

Hello Expert,
I would like to add entry date field (BKPF-CPUDT) at dynamic selection screen in FBL3N transaction.
So, I went to SE36 transaction and changed something in selection view for SDF.
However, it didn't work.
Is there anyone who knows how to add a certain field at dynamic selection screen in FBL3N transaction?
Thanks in advance.
BR,
Chris Kim

Hi
Refer to the following thread
Additional field selections in FB03
It talks about adding Header Text field
You should be able to add entry date similarly
Regards
Sach!n

To create Dynamic Selection screen using Key Fields

Hi All,
We have a requirement where we want to create Dynamic selection screen using Key fileds of Z-table or any standard table.
Please provide some solution if you have worked in this area.
Thanks in Advance,
Anand Raj Kuruba

Hi,
You can use the following statement.
SELECTION-SCREEN DYNAMIC SELECTIONS FOR NODE|TABLE <node>.
declares a node <node> of a logical database for dynamic selections in the selection include.
To use the dynamic selections in the SELECT statements of the subroutine PUT_<node>, you must use the data object DYN_SEL. The data object DYN_SEL is automatically generated in the logical database program as follows:
TYPE-POOLS RSDS.
DATA DYN_SEL TYPE RSDS_TYPE.
You do not have to program these lines yourself. The data object DYN_SEL is available in the database program but not in a connected executable program.
The type RSDS_TYPE of the data object is defined in the type group RSDS as follows:
TYPE-POOL RSDS.
WHERE-clauses ------------------------------
TYPES: RSDS_WHERE_TAB LIKE RSDSWHERE OCCURS 5.
TYPES: BEGIN OF RSDS_WHERE,
TABLENAME LIKE RSDSTABS-PRIM_TAB,
WHERE_TAB TYPE RSDS_WHERE_TAB,
END OF RSDS_WHERE.
TYPES: RSDS_TWHERE TYPE RSDS_WHERE OCCURS 5.
Expressions Polish notation ---------------
TYPES: RSDS_EXPR_TAB LIKE RSDSEXPR OCCURS 10.
TYPES: BEGIN OF RSDS_EXPR,
TABLENAME LIKE RSDSTABS-PRIM_TAB,
EXPR_TAB TYPE RSDS_EXPR_TAB,
END OF RSDS_EXPR.
TYPES: RSDS_TEXPR TYPE RSDS_EXPR OCCURS 10.
Selections as RANGES-tables -----------------
TYPES: RSDS_SELOPT_T LIKE RSDSSELOPT OCCURS 10.
TYPES: BEGIN OF RSDS_FRANGE,
FIELDNAME LIKE RSDSTABS-PRIM_FNAME,
SELOPT_T TYPE RSDS_SELOPT_T,
END OF RSDS_FRANGE.
TYPES: RSDS_FRANGE_T TYPE RSDS_FRANGE OCCURS 10.
TYPES: BEGIN OF RSDS_RANGE,
TABLENAME LIKE RSDSTABS-PRIM_TAB,
FRANGE_T TYPE RSDS_FRANGE_T,
END OF RSDS_RANGE.
TYPES: RSDS_TRANGE TYPE RSDS_RANGE OCCURS 10.
Definition of RSDS_TYPE
TYPES: BEGIN OF RSDS_TYPE,
CLAUSES TYPE RSDS_TWHERE,
TEXPR TYPE RSDS_TEXPR,
TRANGE TYPE RSDS_TRANGE,
END OF RSDS_TYPE.
For more information, please check this link.
http://help.sap.com/saphelp_nw04/helpdata/en/67/93b80914a911d2953c0000e8353423/content.htm
Regards,
Ferry Lianto

How to deal with dynamic selection screen elements when macros are used?

Hello experts,
This is regarding the dynamic selection screen elements. Actually the requirement is to modify the existing standard report program RFUMSV00 by copying it into a Z report, adding a few selection screen elements and new fields in the output. I actually did everything required except for the one thing that is going out of my reach.
There are a certain fields which are coming when they are not supposed to get displayed. I don't understand the code because of its obsoleteness. Neither can I debug it because it is just data declaration.
This is the code where there is a fault. If I copy the entire code into a new Z report, I'm getting new fields like Entry Date, Document Type, Reference Transaction, Reference key, Logical system.
DEFINE selection_screen_line.
selection-screen: begin of line.
parameters &3 like &4 default 'X' modif id mc4.
selection-screen: comment (30) &1 for field &3 modif id mc4.
selection-screen: comment pos_low(10) text-019
                    for field &2 modif id mc4. "neu
parameters &2 like rfums_alv-variante modif id mc4.
selection-screen:
      position pos_high.
selection-screen: pushbutton (15) text-028
                    user-command &5 modif id mc4.
selection-screen end of line.
END-OF-DEFINITION.
Kindly, suggest me the right solution.

In the program attributes ( SE38 > RFUMSV00 > GOTO > Properties ), you will find a logical database BRF declared. The include DBBRFSEL is part of the selection screen of this logical database.
The selection screen is actually the selection screen of this logical database.
Under the Logical Database field, there is a Selection screen field where you can input which selection screen of the logical database to be used.
But, this is just to change the selection screen that is displayed. To completely suppress it you need to remove logical database declaration from the properties of the program and call it inside your program through function module.
You cannot just remove it from the declaration because many of its variables are used in the program.
So call it using function module as the first step in INITIALIZATION section of the program.
The syntax and function module to call it in your program can be found in the following thread :
How to hide the selection screen of a Logical datebase?
Regards,
Ashish

How to schedule the background job using current selection screen field val

Hello Friends,
How to schedule the background job using current selection screen field values.
after completion of the job the spool should be sent as a mail to SAP Inbox.
Is there any way to create the variant dynamically by reading the current selection screen values.
Thanks,
Ravi

Hi,
To get the variant details you can use teh following FM.
'RS_VARIANT_CONTENTS'.
Regards,
Ankur Parab

Need to disable one of the select-options in dynamic selection screen

Hi,
we have copied the Standard program: RFDOPR00 into Z, my requirement is to disable one of the select-options in dynamic selection screen for ex: Reason code(User shouldnot able to enter anything in it).
Can anyone please tell me the procedure to do it... I had tried using at selection-screen but it doesnt work as it in 'LOOP AT SCREEN', i am not able to capture the Parameter name(screen-name).
Thanks,
Ravi

Hi,
Get inside your selection screen, by executing your program.
Now type /h in the field where you enter transaction code and press enter.
Now again press enter, this will take you debugger starting from your Selection screen.
You might be knowing this, still if you are not aware of this, this might be a valuable tip.
From here , you can trace your Parameter name.

How to retrieve values from Dynamic Selection screen while using LDB - PSJ

I am having problem in PSJ Logical database. In a custom report which is using PSJ LDB, we are using PROJ and PRPS_R tables.
When I run program it displays one dynamic selection screen, there we are giving selection criteria for PRPS (Master data WBS element) - Created on (giving some range like 2011/01/01 to 2011/01/31).
So I want to display all WBS element which are created during the period (2011/01/01 - 2011/01/31).
How do I retrieve the select-option low and high value of the field Created on Of WBS element if we Select data from any table based on this condition.
Please help me.
Thanks.

in fact you don't have to get the values, you only need to tell to the program to take them into account :
GET PRPS.
CHECK SELECT-OPTIONS.

ABAP Help: Dynamic Selection Screen

Hi,
I have a requirement to be able to pick the list of fields in a selection screen. (List processing)
Similar to SE16 choosing "fields for selection".
I've debugged SE16 and realized it deletes the report and regenerates a new report with the updated selection screen.
I could not do the same as it will also delete all the variants users have created in the report.
Has anyone done something similar before?
What is the best approach for this scenario?
Regards,
Michael Pang

Hi Michael
Hoping you have solved your problems with ALVs, I think it may be helpful to inspect FMs "FREE_SELECTIONS_INIT" and "FREE_SELECTIONS_DIALOG" for this issue. They have some Function Module Documentation.
If you are dealing with logical databases, then only in the INCLUDE program DBldbSEL of logical database ldb, you can use some selection-screen definition variants as:
1.SELECTION-SCREEN BEGIN OF VERSION vers TEXT-xxx.
2.SELECTION-SCREEN END OF VERSION vers.
3.SELECTION-SCREEN EXCLUDE ... .
4.SELECTION-SCREEN DYNAMIC SELECTIONS FOR TABLE dbtab.
5.SELECTION-SCREEN FIELD SELECTION FOR TABLE dbtab.
6.SELECTION-SCREEN DYNAMIC SELECTIONS FOR NODE node.
7.SELECTION-SCREEN FIELD SELECTION FOR NODE node.
You can get more info from SAPHelp for these...
*--Serdar

Passing values to a dynamic selection screen via a report

Hi,
I have the following problem and need to seek your expertise urgently.
In my program, I need to call another report by passing in parameters to the selection screen of other report. However, I could not pass values into a dynamic selection screen. I tried to use submit (report) with free selection but do not know how it works.
Currently, I tried calling the function RS_REFRESH_FROM_DYNAMICAL_SEL and FREE_SELECTIONS_RANGE_2_EX. Using the object the first function has returned to me, I tried to append values such as fieldname etc to it. However, I realised the field names of a dynamic selection screen keeps changing. So I would not know how to pass a particular value to a selection field.
Appreciate any help given.
Thanks,
CK

Hello CK,
Are you using logical database in your selection screen program attributes? If it is, look at include file DBxxxSEL for parameter named xxxDYNSE where xxx = logical database. Debug the program that has that dynamic selection, and look at field xxxDYNSE. This should give you a hint on how to populate the parameter when you submit the program.

Dynamic selection screen

Hello all,
I have a requirement to create a 'dynamic' selection screen with 2 sections(vertical).
The first section contains set of selection options for which the type comes from the values stored in the internal table(populated at runtime). The second section contains checkbox corresponding to each selection option generated/created in the first section mentioned above.
So the number of fields and checkboxes to be created are identified only at the runtime.
Note: I already tried to use FMs FREE_SELECTIONS* but it is not serving my purpose.
Looking forward to your inputs.
Thanks & Regards,
Rajat
Edited by: rajat.sap123 on Feb 7, 2012 7:18 PM

Why don't you use the At selection-screen output event.
As i have understood your scenario you have two sections. with the first one containing the select-options. The second will change on basis of the first section selection.
Hope it helps you.
Elaborate a bit more so i can paste a code.

Dynamic Selection Screen Fields

Similar Messages

Maybe you are looking for