Dynamic Selection screen modification

Hi,
I have two radio buttons R_A and R_B and 2 parameters P_A and P_B on selsection screen
When i click on R_A , P_A should be visible ---> It Works
When i click on R_B , P_B should be visible ---> It Works
But after clicking on R_B if i click on R_A, then P_B is visble and P_A is not visible.
How should i go abt this.???

HI,
Chk this:
Selection-screen begin of block b1 WITH FRAME NO INTERVALS.
Parameters: s1 radiobutton group g1 user-command u1 default 'X',
            p_name(10) MODIF ID M1,
            p_email(20) MODIF ID M1,
            s2 radiobutton group G1.
Parameters: p_name1(10) MODIF ID M2,
            p_fax(10) MODIF ID M2.
Selection-screen end of block b1 .
AT SELECTION-SCREEN OUTPUT.
* IF S_BOX = 'X'.
      LOOP AT SCREEN.
      IF SCREEN-GROUP1 = 'M3'.
        SCREEN-ACTIVE = '0'.
        MODIFY SCREEN.
      ELSE.
        SCREEN-ACTIVE = '1'.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
* ENDIF.
IF S1 = 'X'.
    LOOP AT SCREEN.
      IF SCREEN-GROUP1 = 'M2'.
        SCREEN-ACTIVE = '0'.
        MODIFY SCREEN.
      ELSEIF SCREEN-GROUP1 = 'M1'.
        SCREEN-ACTIVE = '1'.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ELSEIF S2 = 'X'.
    LOOP AT SCREEN.
      IF SCREEN-GROUP1 = 'M1'.
        SCREEN-ACTIVE = '0'.
        MODIFY SCREEN.
      ELSEIF SCREEN-GROUP1 = 'M2'.
        SCREEN-ACTIVE = '1'.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
regards,
madhumitha

Similar Messages

How to deal with dynamic selection screen elements when macros are used?

Hello experts,
This is regarding the dynamic selection screen elements. Actually the requirement is to modify the existing standard report program RFUMSV00 by copying it into a Z report, adding a few selection screen elements and new fields in the output. I actually did everything required except for the one thing that is going out of my reach.
There are a certain fields which are coming when they are not supposed to get displayed. I don't understand the code because of its obsoleteness. Neither can I debug it because it is just data declaration.
This is the code where there is a fault. If I copy the entire code into a new Z report, I'm getting new fields like Entry Date, Document Type, Reference Transaction, Reference key, Logical system.
DEFINE selection_screen_line.
selection-screen: begin of line.
parameters &3 like &4 default 'X' modif id mc4.
selection-screen: comment (30) &1 for field &3 modif id mc4.
selection-screen: comment pos_low(10) text-019
                    for field &2 modif id mc4. "neu
parameters &2 like rfums_alv-variante modif id mc4.
selection-screen:
      position pos_high.
selection-screen: pushbutton (15) text-028
                    user-command &5 modif id mc4.
selection-screen end of line.
END-OF-DEFINITION.
Kindly, suggest me the right solution.

In the program attributes ( SE38 > RFUMSV00 > GOTO > Properties ), you will find a logical database BRF declared. The include DBBRFSEL is part of the selection screen of this logical database.
The selection screen is actually the selection screen of this logical database.
Under the Logical Database field, there is a Selection screen field where you can input which selection screen of the logical database to be used.
But, this is just to change the selection screen that is displayed. To completely suppress it you need to remove logical database declaration from the properties of the program and call it inside your program through function module.
You cannot just remove it from the declaration because many of its variables are used in the program.
So call it using function module as the first step in INITIALIZATION section of the program.
The syntax and function module to call it in your program can be found in the following thread :
How to hide the selection screen of a Logical datebase?
Regards,
Ashish

Dynamic selection-screen parameters

Hi All,
Is it possible to create a dynamic selection-screen checkbox parameters at runtime. My requirement is :
I have Object parameter on the selection-screen, based on this it has to fetch the info structures and display it with checkboxes on the same selection-screen, so that the user can select which info structures to be processed and can save it as a variant.
Thanks,
Satya Priya

as per ur requirment....execute it and see
tables :DD02L,t002t,t002.
data : begin of itab occurs 0,
 tabname like DD02L-TABNAME,
 end of itab.
 data : tabname1 like DFIES-TABNAME,
 RSSELTEXTS1 type table of RSSELTEXTS with header line.
data : begin of RSSELTEXTS2 occurs 0,
 RSSEL type RSSELTEXTS,
 initial type c,
 end of RSSELTEXTS2.
data : begin of imakt occurs 0 .
 include structure t002.
data : end of imakt.
data : begin of ipara occurs 0,
 name(132) type c,
 text(132) type c,
 end of ipara.
data :srch_str(10) TYPE c,
 tot type i,
 ind type sy-tabix.
select-options : s_lang for t002-spras.
*PARAMETERS show_all AS CHECKBOX USER-COMMAND flag.
PARAMETERS showall1 AS CHECKBOX USER-COMMAND flag modif id sd.
PARAMETERS showall2 AS CHECKBOX USER-COMMAND flag modif id sd.
PARAMETERS showall3 AS CHECKBOX USER-COMMAND flag modif id sd.
PARAMETERS showall4 AS CHECKBOX USER-COMMAND flag modif id sd.
PARAMETERS showall5 AS CHECKBOX USER-COMMAND flag modif id sd.
PARAMETERS showall6 AS CHECKBOX USER-COMMAND flag modif id sd.
PARAMETERS showall7 AS CHECKBOX USER-COMMAND flag modif id sd.
PARAMETERS showall8 AS CHECKBOX USER-COMMAND flag modif id sd.
PARAMETERS showall9 AS CHECKBOX USER-COMMAND flag modif id sd.
PARAMETERS showal10 AS CHECKBOX USER-COMMAND flag modif id sd.
PARAMETERS showal11 AS CHECKBOX USER-COMMAND flag modif id sd.
PARAMETERS showal12 AS CHECKBOX USER-COMMAND flag modif id sd.
PARAMETERS showal13 AS CHECKBOX USER-COMMAND flag modif id sd.
PARAMETERS showal14 AS CHECKBOX USER-COMMAND flag modif id sd.
PARAMETERS showal15 AS CHECKBOX USER-COMMAND flag modif id sd.
PARAMETERS showal16 AS CHECKBOX USER-COMMAND flag modif id sd.
PARAMETERS showal17 AS CHECKBOX USER-COMMAND flag modif id sd.
PARAMETERS showal18 AS CHECKBOX USER-COMMAND flag modif id sd.
PARAMETERS showal19 AS CHECKBOX USER-COMMAND flag modif id sd.
PARAMETERS showal20 AS CHECKBOX USER-COMMAND flag modif id sd.
initialization.
at selection-screen output.
if s_lang ne ' '.
select * from t002 into table imakt where spras in s_lang.
describe table imakt lines tot.
loop at screen .
 if screen-group1 = 'SD'
 and screen-group3 = 'PAR'.
 ipara-name = screen-name.
 ind = screen-group4.
 read table imakt index ind.
 ipara-text = imakt-laiso.
 append ipara.
 clear ipara.
 endif.
endloop.
endif.
loop at ipara.
RSSELTEXTS1-name = ipara-name.
RSSELTEXTS1-kind = 'P'.
RSSELTEXTS1-text = ipara-text.
append RSSELTEXTS1.
clear RSSELTEXTS1.
endloop.
CALL FUNCTION 'SELECTION_TEXTS_MODIFY'
EXPORTING
 PROGRAM = sy-repid
TABLES
 SELTEXTS = RSSELTEXTS1
EXCEPTIONS
PROGRAM_NOT_FOUND = 1
PROGRAM_CANNOT_BE_GENERATED = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
if s_lang ne ' '.
loop at screen .
 if screen-group1 = 'SD'
 and screen-group3 = 'PAR'
 and screen-group4 > tot.
 screen-input = '0'.
 screen-active = '0'.
 modify screen.
 endif.
endloop.
endif.
if s_lang = ' '.
loop at screen .
 if screen-group1 = 'SD'.
 screen-input = '0'.
 screen-active = '0'.
 modify screen.
 endif.
endloop.
endif.

Need to generate dynamic selection screen

Hi,
'am looking for a requirement in ABAP Programming which is feasible!
While executing my report, std. selection screen ( 1000) gets displayed and it gives the output list which consists of only one field that will have TABLE NAMES. Once the user selects any one of the record on this output list, I need to display another screen ( selection screen ) with all the key fields of that table that got seleted.
How do I populate a dynamic selection screen by passing TABLE NAME as parameter with all the keyfields of that table as select-options.
Awaiting your quick positive reply..
Regards,
Kriss.

hii
check this one
SELECTION-SCREEN BEGIN OF BLOCK blk.
PARAMETERS : p_rb1 TYPE c RADIOBUTTON GROUP rad1 DEFAULT 'X' USER-COMMAND FC,
 p_rb2 TYPE c RADIOBUTTON GROUP rad1.
SELECTION-SCREEN END OF BLOCK blk.
SELECTION-SCREEN BEGIN OF BLOCK blk_1 WITH FRAME.
PARAMETERS : p_werks1 TYPE werks_d MODIF ID bk1.
SELECTION-SCREEN END OF BLOCK blk_1.
SELECTION-SCREEN BEGIN OF BLOCK blk_2 WITH FRAME.
PARAMETERS : p_werks2 TYPE werks_d MODIF ID bk2,
 p_matnr2 TYPE matnr MODIF ID bk2.
SELECTION-SCREEN END OF BLOCK blk_2.
AT SELECTION-SCREEN OUTPUT.
IF p_rb1 = 'X'.
 LOOP AT SCREEN.
 IF screen-group1 = 'BK1'.
 screen-active = 0.
 MODIFY SCREEN.
 ELSE.
 screen-active = 1.
 MODIFY SCREEN.
 ENDIF.
 ENDLOOP.
ELSE.
 LOOP AT SCREEN.
 IF screen-group1 = 'BK2'.
 screen-active = 0.
 MODIFY SCREEN.
 ELSE.
 screen-active = 1.
 MODIFY SCREEN.
 ENDIF.
 ENDLOOP.
ENDIF.
Regards
Naresh

Alv Output after dynamic selection screen

Hi Guys
I have coded a dynamic selection screen (shown below). I want to create an ALV report based on what the user enters in the selection screen. Is the right way of doing this to code an IF s_matnr is not initial statement then call all the subroutines for output of material data and then else call a second batch of subroutines for billing data. It seems a bit long winded to me but I haven't been able to find anything on google that clearly explains the approach.
REPORT ZTREVOR_DYNAMIC_ALV_MAKT_VBRP.
TABLES : makt,
marc,
t001w,
vbrk,
vbrp.
CONSTANTS : c_yes TYPE c VALUE '1',
c_no TYPE c VALUE '0'.
Selection-screen begin of block b1 with frame title text-sc1.
PARAMETERS : p_opt1 TYPE c RADIOBUTTON GROUP radi USER-COMMAND op1, "Material
p_opt2 TYPE c RADIOBUTTON GROUP radi. "Billing Document
Selection-screen end of block b1.
Selection-screen begin of block b2 with frame title text-sc2.
SELECT-OPTIONS : s_matnr FOR makt-matnr MODIF ID op1, "Material
s_vbeln FOR vbrp-vbeln MODIF ID op2. "Billing Document
Selection-screen end of block b2.
T SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN .
IF screen-group1 = 'OP1' .
IF p_opt1 = 'X' .
screen-invisible = c_no .
screen-active = c_yes .
ELSE.
screen-invisible = c_yes .
screen-active = c_no .
ENDIF.
MODIFY SCREEN .
ENDIF.
IF screen-group1 = 'OP2' .
IF p_opt2 = 'X' .
screen-invisible = c_no .
screen-active = c_yes .
ELSE.
screen-invisible = c_yes .
screen-active = c_no .
ENDIF.
MODIFY SCREEN .
ENDIF.
ENDLOOP.

Hi,
First of all, you should check your radiobutton instead of select-option...
Then you will have to build the output internal table dynamically based on the option chosen. There are lot of example on SDN...
Here is a start: http://wiki.sdn.sap.com/wiki/display/Snippets/Tutorialabap-CodeforDynamicAlv+grid
Kr,
m.

How to generate dynamic selection-screen?

Hi all,
I have two radio buttons on selection-screen.
If user-selects the one, Then under the radio button another parameter should be displayed
if he selects another radio button, the previous parameter should not be displayed and another parameter should appear in the selection screen under the second radio button.
Please help by giving the code to solve this problem?
Thanks,
Vamshi.

Hi Vamsi,
By using AT SELECTION-SCREEN OUTPUT and creating the MOdif id for the selection screen parameter you can achieve the dynamic selection scree..
AT SELECTION-SCREEN OUTPUT.
* Modify selection screen as per the radio buttons selected.
PERFORM modify_sel-screen.
FORM modify_sel-screen .
* If radio button - process in range of STR's selected, display STR
* range and Date range as input
IF p_rb1 EQ c_x.
    LOOP AT SCREEN.
      IF screen-group1 = c_ir2.
        screen-active = c_0.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
* If radio button - process from excel is selected, give option for
* user to upload file
ELSEIF p_rb2 EQ c_x.
    LOOP AT SCREEN.
      IF screen-group1 = c_ir1.
        screen-active = c_0.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    " MODIFY_SEL-SCREEN
see the below example....
copy the below code you can come to know how the dynamic selection screen happens..
*                   S E L E C T I O N S C R E E N                     *
* Selection criteria
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_rb1 RADIOBUTTON GROUP gr1 USER-COMMAND com1 DEFAULT 'X',
                                         "Process STR's in date range
           p_rb2 RADIOBUTTON GROUP gr1. "Process STR's from Excel
SELECTION-SCREEN BEGIN OF BLOCK c1 WITH FRAME .
PARAMETERS : p_apover TYPE zcpeg_fg_related-pl_version OBLIGATORY.
                                                            "PJ1031008
SELECTION-SCREEN END OF BLOCK c1.
SELECTION-SCREEN END OF BLOCK b1.
* Display date range to process STR's
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
SELECT-OPTIONS: s_banfn FOR w_preq MODIF ID ir1,
                                    "Purchase requisition number
                s_lfdat FOR w_lfdat MODIF ID ir1.
"Date range
SELECTION-SCREEN END OF BLOCK b2.
* Option for uploading file to process STR's
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETERS: p_file TYPE rlgrap-filename MODIF ID ir2. "File name
SELECTION-SCREEN END OF BLOCK b3.
AT SELECTION-SCREEN OUTPUT.
* Modify selection screen as per the radio buttons selected.
PERFORM modify_sel-screen.
FORM modify_sel-screen .
* If radio button - process in range of STR's selected, display STR
* range and Date range as input
IF p_rb1 EQ c_x.
    LOOP AT SCREEN.
      IF screen-group1 = c_ir2.
        screen-active = c_0.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
* If radio button - process from excel is selected, give option for
* user to upload file
ELSEIF p_rb2 EQ c_x.
    LOOP AT SCREEN.
      IF screen-group1 = c_ir1.
        screen-active = c_0.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    " MODIFY_SEL-SCREEN
Regards,
Prabhudas

How to add a new Field in the Dynamic Selection screen section.

HI,
There is a requirement in which I need to add a field in existing program of dynamic selections.
I need to add a field KNKK-DBRTG (Customer Rating) in dynamic selections screen of some existing report
which has a dynamic selection screen with other fields like customer account, company code etc. Along with this i need to add Customer rating field also in the selection screen.
I have used GET KNKK statement to select this in the Dynamic selection screen. But I need to make it appear
on the screen.
LDB used is the Customer Database.
I have added GET KNKK statement after GET KNA1 statement.
Can any one help me how we can make this rating field appear in the selection screen.
With the GET statement Credit control area Fields can be selected in the selection screen but I have to permanantly add the field in the selection screen.
Regards
Prashant Prabhu

Hi,
So you need that this new field have data in old records?
1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
2.- If condition "1" is not yours.
First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
Hope it helps. Regards, Federico

Exclude one field from Logical Database's dynamic selection screen

Hi Guru,
I have a requirement to amend a program to exclude the document number field (bsik-belnr) from the dynamic selection-screen of the logical database KDF(Vendor Database) so that the program will not filter according to the document number.
I have use the below syntax in my zprogram.
selection-screen exclude select-options: doc-no.
However I get syntax error "The addition EXCLUDE is only allowed in INCLUDE DBKDFSEL".
Please advice.
Best Regards,
Fung

The selection part of the logical database defines input fields for selecting data.
 The runtime environment displays these on the selection screen when you run an executable program linked to the logical database.
 Include called DB<ldbname>SEL.
 SELECTION-SCREEN BEGIN OF VERSION ver TEXT-xxx.
 SELECTION-SCREEN EXCLUDE ... .
 SELECTION-SCREEN END OF VERSION ver.
Defines a selection screen version (with a three-character name ver ). Between BEGIN OF VERSION and END OF VERSION , you can exclude selection screen objects for the version ver , i.e. remove them from the selection screen with SELECTION-SCREEN EXCLUDE.
 SELECTION-SCREEN DYNAMIC SELECTIONS FOR TABLE dbtab
If one of these tables is active in the report (i.e. it is declared under TABLES or lies somewhere on the path from the root of the database hierarchy to a table declared with TABLES ), a pushbutton called 'Dynamic selections' appears on the selection screen.

Need to disable one of the select-options in dynamic selection screen

Hi,
we have copied the Standard program: RFDOPR00 into Z, my requirement is to disable one of the select-options in dynamic selection screen for ex: Reason code(User shouldnot able to enter anything in it).
Can anyone please tell me the procedure to do it... I had tried using at selection-screen but it doesnt work as it in 'LOOP AT SCREEN', i am not able to capture the Parameter name(screen-name).
Thanks,
Ravi

Hi,
Get inside your selection screen, by executing your program.
Now type /h in the field where you enter transaction code and press enter.
Now again press enter, this will take you debugger starting from your Selection screen.
You might be knowing this, still if you are not aware of this, this might be a valuable tip.
From here , you can trace your Parameter name.

How to use dynamic selection screen inputs in main program

hi all,
its a report where in it calls one dynamic selection screen( user need to enter the parameters here) after that i need to use those inputs for some check, can any buddy help how to use/ get that input parameters into main program.
regards,
vara..

Hi,
i think u have created that dynamic selection screen in seperate program and calling to ur main program.instead of that u just create that synamic selection screen program as include program and include it in ur main program.
or u need to use set/get parameter id concept.
rgds,
bharat.

How to retrieve values from Dynamic Selection screen while using LDB - PSJ

I am having problem in PSJ Logical database. In a custom report which is using PSJ LDB, we are using PROJ and PRPS_R tables.
When I run program it displays one dynamic selection screen, there we are giving selection criteria for PRPS (Master data WBS element) - Created on (giving some range like 2011/01/01 to 2011/01/31).
So I want to display all WBS element which are created during the period (2011/01/01 - 2011/01/31).
How do I retrieve the select-option low and high value of the field Created on Of WBS element if we Select data from any table based on this condition.
Please help me.
Thanks.

in fact you don't have to get the values, you only need to tell to the program to take them into account :
GET PRPS.
CHECK SELECT-OPTIONS.

Passing values to a dynamic selection screen via a report

Hi,
I have the following problem and need to seek your expertise urgently.
In my program, I need to call another report by passing in parameters to the selection screen of other report. However, I could not pass values into a dynamic selection screen. I tried to use submit (report) with free selection but do not know how it works.
Currently, I tried calling the function RS_REFRESH_FROM_DYNAMICAL_SEL and FREE_SELECTIONS_RANGE_2_EX. Using the object the first function has returned to me, I tried to append values such as fieldname etc to it. However, I realised the field names of a dynamic selection screen keeps changing. So I would not know how to pass a particular value to a selection field.
Appreciate any help given.
Thanks,
CK

Hello CK,
Are you using logical database in your selection screen program attributes? If it is, look at include file DBxxxSEL for parameter named xxxDYNSE where xxx = logical database. Debug the program that has that dynamic selection, and look at field xxxDYNSE. This should give you a hint on how to populate the parameter when you submit the program.

Selection screen modification based on various buttons in selection screen

Hi,
I have 1 query related with Selection screen modification.
In my Report Program,I have created GUI Status for my selection screen
Now 2 buttons in application toolbar are coming on selection sceen.
For this i used,'At selection screen output' event.
And there are 2 blocks on selection screen.
If user press button1 then block2 should not display.
and if user press button2 then block1 should not display.
but the problem is i m not getting reqd result and also while doing debugging its not showing me sy-ucomm value.
Any pointers on this.
Thanks,
Mamta

Hi Mamta,
   have it in a group then you can write code accordingly see sample example,
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS       : p_r1 RADIOBUTTON GROUP rad
                        USER-COMMAND clk DEFAULT 'X'.            " upload Radio Button
SELECTION-SCREEN COMMENT 5(35) text-003.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN : BEGIN OF BLOCK 001 WITH FRAME TITLE text-001.
PARAMETERS: p_upl       LIKE rlgrap-filename MODIF ID a           "Upload File
                         DEFAULT 'c:\temp\parbmat.xls',
            p_werks     like t001w-werks MODIF ID a,              "Plant
PARAMETERS: p_rest      LIKE rlgrap-filename MODIF ID a           "Dwonload File Path
                         DEFAULT 'c:\temp\Success.xls'.
SELECTION-SCREEN : END OF BLOCK 001.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : p_r2 RADIOBUTTON GROUP rad.
SELECTION-SCREEN COMMENT 5(35) text-004.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN : BEGIN OF BLOCK 002 WITH FRAME TITLE text-002.
PARAMETERS     : p_plant LIKE marc-werks MODIF ID b.                "Plant
PARAMETERS     : p_lgort LIKE mard-lgort MODIF ID b.                "Storage Location
PARAMETERS     : p_vkorg LIKE mvke-vkorg MODIF ID b.                "Sales Organization
PARAMETERS     : p_vtweg LIKE mvke-vtweg MODIF ID b.                "Distribution Channel
SELECT-OPTIONS : s_mat FOR mara-matnr MODIF ID b.                  "Material No No
SELECT-OPTIONS : s_dat FOR mara-ersda MODIF ID b.                  "Date on Record Created
PARAMETERS     : p_down LIKE rlgrap-filename MODIF ID b
                  DEFAULT 'c:\temp\Material Master.xls'.           "Download File Path
SELECTION-SCREEN : END OF BLOCK 002.
AT SELECTION-SCREEN OUTPUT.
*Inactive Fields depending on the radio button
LOOP AT SCREEN.
    IF p_r1 = 'X'.
      IF screen-group1 = 'B'.
        screen-active = 0.
      ENDIF.
    ELSEIF p_r2 = 'X'.
      IF screen-group1 = 'A'.
        screen-active = 0.
      ENDIF.
    ENDIF.
    MODIFY SCREEN.
ENDLOOP.
Edited by: suresh suresh on Jul 28, 2009 12:42 PM
Edited by: suresh suresh on Jul 28, 2009 12:42 PM

Dynamic selection screen

Hello all,
I have a requirement to create a 'dynamic' selection screen with 2 sections(vertical).
The first section contains set of selection options for which the type comes from the values stored in the internal table(populated at runtime). The second section contains checkbox corresponding to each selection option generated/created in the first section mentioned above.
So the number of fields and checkboxes to be created are identified only at the runtime.
Note: I already tried to use FMs FREE_SELECTIONS* but it is not serving my purpose.
Looking forward to your inputs.
Thanks & Regards,
Rajat
Edited by: rajat.sap123 on Feb 7, 2012 7:18 PM

Why don't you use the At selection-screen output event.
As i have understood your scenario you have two sections. with the first one containing the select-options. The second will change on basis of the first section selection.
Hope it helps you.
Elaborate a bit more so i can paste a code.

Adding new table dynamic selection screen of transaction FBL5N (LDB DDF).

Hi,
I have a requirement to add SEGMENT (CEPC-SEGMENT) field on the dynamic selection screen of transaction FBL5N (LDB DDF).
Please let me know how can I meet this requirement
Thanks

I did not find any screen exits for this Tcode, may be you need to use enhancement spots.

Dynamic Selection screen modification

Similar Messages

Maybe you are looking for