Dynamic selector for MDB

Hello,
I want to achieve the following using JMS,
Receiving messages from producers with specific criteria, ex. give me only messages that have date less than now.
if I used MDB then I have the choice of setting the selctor only one time, is there a way to set it from time to time.
If not then how do I achieve that using a combination of session beans and MDBs.
Becasue I want to do some processing on the messages received of that criteria then resend them to other receivers.

Generally you cannot do this. The selector syntax does not allow comparisons against System.currentTimeMills(), and consumers don't allow changes to the selector. Within the specification, the best one can do is recreate the consumer over and over again. This is of course made even worse in that selectors for MDBs are buried inside a deployment descriptor. Nasty stuff.
WebLogic JMS allows you to specify a delivery time on a message. However it is considered an extension. Other vendors may have a similar feature, but there is no common API for it.

Similar Messages

  • Dynamic selctors for MDBs

    Is it possible to dynamically change a MDB selector or does the MDB have
    to deployed each time the selector changes? Redeploying is not an option
    as we want a client to be able to state the criteria of the selector,
    say for example, give me messages for stock BEA when its price exceeds
    $10.
    The same use then want to change this to $11. This is too dynaminc for a
    redeployment per selector change.
    Must I resort to non-MDB listeners for this?

    Is it possible to dynamically change a MDB selector or does the MDB have
    to deployed each time the selector changes? Redeploying is not an option
    as we want a client to be able to state the criteria of the selector,
    say for example, give me messages for stock BEA when its price exceeds
    $10.
    The same use then want to change this to $11. This is too dynaminc for a
    redeployment per selector change.
    Must I resort to non-MDB listeners for this?

  • How to make dynamic provider-url for MDB.

    Hi,
              My application has an MDB that need to bind to a remote queue. The .bindigs file is created and put in a specified location. Is there any way I can specify a dynamic value for this location in the <provider-url> tag in my weblogic-ejb.xml file. This is because, in our UNIX test and prod servers, the location of the .bindings file different from what I have on my local box. I have tried like this, but it did not work.
              <provider-url>file:/%DOMAIN_DIR%/config/<provider-url>
              We always have a 'config' directory under the domain and if the domain name changes in different environments, i don't have to make any changes to my descriptor file.
              Thanks,
              Rajeev

    I met a similar problem when I used the foreign JMS server. I configured the foreign server via console. I tried to subscribe a remote topic which was maintained by another WebLogic JMS server. When I built my MDB, I got the following exception. The remote JMS server name could not be resolved. Any suggection is appreciated.
              <Sep 19, 2005 6:11:56 PM EDT> <Warning> <EJB> <BEA-010061> <The Message-Driven E
              JB: SIGNIT is unable to connect to the JMS destination: jms/DCGSCatalogTopic. Th
              e Error was:
              [EJB:010196]'weblogic.jms.common.JMSException: Error creating session' Linked ex
              ception = 'weblogic.jms.dispatcher.DispatcherException: could not find JMS Serve
              r riicServer'
              weblogic.jms.common.JMSException: Error creating session
              at weblogic.jms.frontend.FESession.setUpBackEndSession(FESession.java:79
              8)
              at weblogic.jms.frontend.FESession.consumerCreate(FESession.java:1038)
              at weblogic.jms.frontend.FESession.invoke(FESession.java:2552)
              at weblogic.jms.dispatcher.Request.wrappedFiniteStateMachine(Request.jav
              a:643)
              at weblogic.jms.dispatcher.DispatcherImpl.dispatchSync(DispatcherImpl.ja
              va:179)
              at weblogic.jms.client.JMSSession.consumerCreate(JMSSession.java:1860)
              at weblogic.jms.client.JMSSession.createConsumer(JMSSession.java:1691)
              at weblogic.jms.client.JMSSession.createSubscriber(JMSSession.java:1422)
              at weblogic.ejb20.internal.JMSConnectionPoller.setUpTopicSessions(JMSCon
              nectionPoller.java:1582)
              at weblogic.ejb20.internal.JMSConnectionPoller.createJMSConnection(JMSCo
              nnectionPoller.java:2009)
              at weblogic.ejb20.internal.JMSConnectionPoller.connectToJMS(JMSConnectio
              nPoller.java:1180)
              at weblogic.ejb20.internal.JMSConnectionPoller.startJMSConnectionPolling
              (JMSConnectionPoller.java:846)
              at weblogic.ejb20.deployer.MessageDrivenBeanPoolInfoImpl.start(MessageDr
              ivenBeanPoolInfoImpl.java:234)
              at weblogic.ejb20.deployer.EJBDeployer.deployMessageDrivenBeans(EJBDeplo
              yer.java:1660)
              at weblogic.ejb20.deployer.EJBDeployer.start(EJBDeployer.java:1488)
              at weblogic.ejb20.deployer.EJBModule.start(EJBModule.java:689)
              at weblogic.j2ee.J2EEApplicationContainer.start(J2EEApplicationContainer
              .java:2127)
              at weblogic.j2ee.J2EEApplicationContainer.activate(J2EEApplicationContai
              ner.java:2168)
              at weblogic.management.deploy.slave.SlaveDeployer$ComponentActivateTask.
              activateContainer(SlaveDeployer.java:2503)
              at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.doCommit(
              SlaveDeployer.java:2421)
              at weblogic.management.deploy.slave.SlaveDeployer$Task.commit(SlaveDeplo
              yer.java:2138)
              at weblogic.management.deploy.slave.SlaveDeployer$Task.checkAutoCommit(S
              laveDeployer.java:2237)
              at weblogic.management.deploy.slave.SlaveDeployer$Task.prepare(SlaveDepl
              oyer.java:2132)
              at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare(S
              laveDeployer.java:2384)
              at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(Sla
              veDeployer.java:866)
              at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDepl
              oyer.java:594)
              at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDep
              loyer.java:508)
              at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHan
              dler.java:25)
              at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
              at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
              Caused by: weblogic.jms.dispatcher.DispatcherException: could not find JMS Serve
              r riicServer
              at weblogic.jms.dispatcher.DispatcherManager.dispatcherCreate(Dispatcher
              Manager.java:330)
              at weblogic.jms.dispatcher.DispatcherManager.dispatcherFindOrCreate(Disp
              atcherManager.java:380)
              at weblogic.jms.frontend.FESession.setUpBackEndSession(FESession.java:79
              6)
              ... 29 more
              Caused by: javax.naming.NameNotFoundException: Unable to resolve 'weblogic.jms.S
              :riicServer' Resolved weblogic.jms; remaining name 'S:riicServer'
              at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(Basic
              NamingNode.java:897)
              at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.jav
              a:230)
              at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.j
              ava:154)
              at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:18
              8)
              at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:19
              6)
              at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:19
              6)
              at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.j
              ava:256)
              at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:359)
              at javax.naming.InitialContext.lookup(InitialContext.java:347)
              at weblogic.jms.dispatcher.DispatcherManager.dispatcherCreate(Dispatcher
              Manager.java:314)
              ... 31 more
              >
              <Sep 19, 2005 6:12:06 PM EDT> <Warning> <EJB> <BEA-010096> <The Message-Driven E
              JB: SIGNIT is unable to connect to the JMS destination: jms/DCGSCatalogTopic. Co
              nnection failed after 2 attempts. The MDB will attempt to reconnect every 10 sec
              onds. This log message will repeat every 600 seconds until the condition clears.
              >
              <Sep 19, 2005 6:12:06 PM EDT> <Warning> <EJB> <BEA-010061> <The Message-Driven E
              JB: SIGNIT is unable to connect to the JMS destination: jms/DCGSCatalogTopic. Th
              e Error was:
              [EJB:010196]'weblogic.jms.common.JMSException: Error creating session' Linked ex
              ception = 'weblogic.jms.dispatcher.DispatcherException: could not find JMS Serve
              r riicServer'
              weblogic.jms.common.JMSException: Error creating session
              at weblogic.jms.frontend.FESession.setUpBackEndSession(FESession.java:79
              8)
              at weblogic.jms.frontend.FESession.consumerCreate(FESession.java:1038)
              at weblogic.jms.frontend.FESession.invoke(FESession.java:2552)
              at weblogic.jms.dispatcher.Request.wrappedFiniteStateMachine(Request.jav
              a:643)
              at weblogic.jms.dispatcher.DispatcherImpl.dispatchSync(DispatcherImpl.ja
              va:179)
              at weblogic.jms.client.JMSSession.consumerCreate(JMSSession.java:1860)
              at weblogic.jms.client.JMSSession.createConsumer(JMSSession.java:1691)
              at weblogic.jms.client.JMSSession.createSubscriber(JMSSession.java:1422)
              at weblogic.ejb20.internal.JMSConnectionPoller.setUpTopicSessions(JMSCon
              nectionPoller.java:1582)
              at weblogic.ejb20.internal.JMSConnectionPoller.createJMSConnection(JMSCo
              nnectionPoller.java:2009)
              at weblogic.ejb20.internal.JMSConnectionPoller.connectToJMS(JMSConnectio
              nPoller.java:1180)
              at weblogic.ejb20.internal.JMSConnectionPoller.trigger(JMSConnectionPoll
              er.java:978)
              at weblogic.time.common.internal.ScheduledTrigger.run(ScheduledTrigger.j
              ava:243)
              at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
              dSubject.java:321)
              at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
              121)
              at weblogic.time.common.internal.ScheduledTrigger.executeLocally(Schedul
              edTrigger.java:229)
              at weblogic.time.common.internal.ScheduledTrigger.execute(ScheduledTrigg
              er.java:223)
              at weblogic.time.server.ScheduledTrigger.execute(ScheduledTrigger.java:5
              0)
              at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
              at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
              Caused by: weblogic.jms.dispatcher.DispatcherException: could not find JMS Serve
              r riicServer
              at weblogic.jms.dispatcher.DispatcherManager.dispatcherCreate(Dispatcher
              Manager.java:330)
              at weblogic.jms.dispatcher.DispatcherManager.dispatcherFindOrCreate(Disp
              atcherManager.java:380)
              at weblogic.jms.frontend.FESession.setUpBackEndSession(FESession.java:79
              6)
              ... 19 more
              Caused by: javax.naming.NameNotFoundException: Unable to resolve 'weblogic.jms.S
              :riicServer' Resolved weblogic.jms; remaining name 'S:riicServer'
              at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(Basic
              NamingNode.java:897)
              at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.jav
              a:230)
              at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.j
              ava:154)
              at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:18
              8)
              at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:19
              6)
              at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:19
              6)
              at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.j
              ava:256)
              at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:359)
              at javax.naming.InitialContext.lookup(InitialContext.java:347)
              at weblogic.jms.dispatcher.DispatcherManager.dispatcherCreate(Dispatcher
              Manager.java:314)
              ... 21 more
              >

  • Dynamic destination for selectors

    Hi,
    I am wondering if it is possible to change dynamically the destination where a selector inserts the selected data?
    I use a List Box in which you can select a task (corresponding to a row in the Worksheet). Choosing one of the tasks inserts the corresponding row at another place in the sheet. I want the user to select with a radio button if he wants to perform the task or not and store the answer in the good row in the table containing data of all tasks. As i have only one radio button selector for all the tasks, I wanted to know how I could specify that the insertion destination depends on the selected item of the list box.
    Regards,
    Nicolas F

    Nicolas,
    You cannot dynamically change the destnation of the list box selection. But in the excel you can write a formula using if() condition. Say the list box values are A B C. when user selects any one of the value from the list box, place it at a destination say A1 in excel. now say if the user selects A then u want to place it in C1. For B, u want to place it in D1 and for C, u want to place it in E1. Then your C1 will have the formula like this (=if($A$1=A,A1,"")). Similar formulae for the cells D1 and E1.
    Thanks,
    Karthik

  • Dynamic actions for buttons

    11gxe , apex 4.x ,
    hi all ,
    i am new to apex ,
    i want to create a button , then create a dynamic action to it to do an action , but when i create the button , then go to
    create a dynamic action , i see the a lot of events but when i go to pick an item to create the dynamic action for , i do not see the buttons created ?
    thanks

    Hi,
    I see. Your local install of Apex is version 4.0, apperantly it is not supported to create a dynamic action that is triggered by a button.
    You can, with some effort, create a dynamic action on a button. You'll need to create a button with 'Button Style' set to 'HTML button' and add a custom class or id to that button under the 'Button Attributes'. For example:
    http://vincentdeelen.com/images/otn/da_button_layout.png
    Then create a dynamic action, choose 'jQuery selector' as selection type and then use the class or the id of the button as selector. The outcome should look something like this:
    http://vincentdeelen.com/images/otn/da_da_layout.png
    For more info on jQuery and selectors, study the jQuery website: http://www.jquery.com
    Regards,
    Vincent

  • How to set up Dynamic Variants for job which is based on Pay Period

    Hi,
    We need to set up dynamic variant for payroll interface.  This interface is based on Pay periods and that is why we need to use different variant for each month.  Letus know how to set up dynamic variant which will take care of Pay Periods

    Hi,  Thnx for reply.
    We are not changing the control records, current period will be some old period in system. 
    payroll is not processed in SAP,

  • How to know the dynamic values for this :AND category_id_query IN (1, :3, )

    Hi Team,
    R12 Instance :
    Oracle Installed Base Agent User Responsibility --> Item Instances -->
    Item Instance: Item Instances > View : Item Instance : xxxxx> Contracts : Item Instance : xxxxx> Service Contract: xxxxx>
    In the above page there are two table regions.
    Notes.
    -------------------------------------Table Region---------------------------
    Attachments
    -------------------------------------Table Region---------------------------
    --the attachments are shown using the query from the fnd_lobs and fnd_docs etc...
    I want to know what are the document types are displayed in this page ?
    --We developed a custom program to attach the attachments to the  services contracts and the above seeded OAF page displays those ..as needed.
    But after recent changes..the Attachments--> table region is not showing the attachments.
    I have verified the query..and could not find any clue in that..
    but i need some help if you guys can provide..
    SELECT *
    FROM
    *(SELECT d.DOCUMENT_ID,*
    d.DATATYPE_ID,
    d.DATATYPE_NAME,
    d.DESCRIPTION,
    DECODE(d.FILE_NAME, NULL,
    *(SELECT message_text*
    FROM fnd_new_messages
    WHERE message_name = 'FND_UNDEFINED'
    AND application_id = 0
    AND language_code  = userenv('LANG')
    *), d.FILE_NAME)FileName,*
    d.MEDIA_ID,
    d.CATEGORY_ID,
    d.DM_NODE,
    d.DM_FOLDER_PATH,
    d.DM_TYPE,
    d.DM_DOCUMENT_ID,
    d.DM_VERSION_NUMBER,
    ad.ATTACHED_DOCUMENT_ID,
    ad.ENTITY_NAME,
    ad.PK1_VALUE,
    ad.PK2_VALUE,
    ad.PK3_VALUE,
    ad.PK4_VALUE,
    ad.PK5_VALUE,
    d.usage_type,
    d.security_type,
    d.security_id,
    ad.category_id attachment_catgeory_id,
    ad.status,
    d.storage_type,
    d.image_type,
    d.START_DATE_ACTIVE,
    d.END_DATE_ACTIVE,
    d.REQUEST_ID,
    d.PROGRAM_APPLICATION_ID,
    d.PROGRAM_ID,
    d.category_description,
    d.publish_flag,
    DECODE(ad.category_id, NULL, d.category_id, ad.category_id) category_id_query,
    d.URL,
    d.TITLE
    FROM FND_DOCUMENTS_VL d,
    FND_ATTACHED_DOCUMENTS ad
    WHERE d.DOCUMENT_ID = ad.DOCUMENT_ID
    *) QRSLT*
    WHERE ((entity_name    ='OKC_K_HEADERS_V'-- :1
    AND pk1_value          IN ( 600144,599046) --:2
    AND category_id_query IN (1, :3, :4, :5, :6, :7) )
    AND datatype_id       IN (6,2,1,5)
    AND (SECURITY_TYPE     =4
    OR PUBLISH_FLAG        ='Y')))
    --='000180931' -- 'ADP118'
    The above seeded query is the one which is used for table region to retrieve the data..
    how to know the dynamic values for this : AND category_id_query IN (1, :3, :4, :5, :6, :7) )
    --Sridhar                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    Hi Patricia,
    is it working for restricted key figure and calculated key figure ??
    Note Number Fisc Period Opening Days
    1 1 2
    2 1 3
    3 1 0
    because I have other restriction, so I create two restricted key figure..
    RK1  with restriction :  Total Number of Note,
    RK2  with restriction :  Total Opening Days ,
    then I Created a calculated key figure, average opening days in a period
    CK1 = RK2 / RK1..
    in this case, I am not sure if it will work or not..
    for example, during RK2 calclation, it might be this   2+3 = 5, the line with 0 will be ignored..
    during RK1 calcualtion, it might be 1 + 1 + 1 = 3. ---> Not sure in this case, the line with opening days 0 will be calculated or not..
    could you please confirm..

  • ASA 5505 -Can I use outside dynamic IP for webserver DMZ?

    SETUP
    ASA 5505
    ASA Version 9.1(2)
    ASDM Version 7.1(3)
    I have basic license, using only three vlans (outside, inside, DMZ).
    QUESTION:
    I want to find a way (if possible) to use the single DYNAMIC IP (dhcp'd from ISP) on the "outside" interface, as a means to setup a web-server on the DMZ? I just want to allow my WHS-2011 (server) to talk to microsoft's free DDNS service where my domain name is hosted (ports 80,443,4125).
    So far, every setup option I have tried does not make it past the implicit deny acl's (on the outside interface) to the web-server (DMZ).
    I understand that the VLAN1 (inside) had to be disabled. I understand that objects now replace some of the older NAT'd components.
    CONFIG:
    object network webserver-external-ip
    host <X.X.X.X>
    ! I had set this to match my ISP DHCP address
    object network webserver
    host 172.16.0.2
    nat (DMZ,outside) static webserver-external-ip service tcp www www
    nat (DMZ,outside) static webserver-external-ip service tcp 443 443
    nat (DMZ,outside) static webserver-external-ip service tcp 4125 4125
    access-list outside_acl extended permit tcp any object webserver eq www
    access-list outside_acl_https extended permit tcp any object webserver eq 443
    access-list outside_acl_rww extended permit tcp any object webserver eq 4125
    access-group outside_acl in interface outside
    access-group outside_acl_https in interface outside
    access-group outside_acl_rww in interface outside
    ! added the dns statements below because the cisco doc (below) says it's required or dmz traffic can't get out despite default rule allowing it to do so.
    ! (ctrl-F) ... "all traffic would be blocked from the dmz to hosts on the internet"
    ! http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080bf150c.shtml
    object network dns-server
    host 8.8.8.8
    exit
    access-list dmz_acl extended permit udp any object dns-server eq domain
    access-list dmz_acl extended permit ip any any
    access-group dmz_acl in interface DMZ
    SUMMARY:
    I just want to allow my WHS-2011 (server) to talk to microsoft's free DDNS service where my domain name is hosted (ports 80,443,4125).
    I want to find a way (if possible) to use the single DYNAMIC IP (dhcp'd from ISP) on the "outside" interface, as a means to setup a web-server on the DMZ?
    Other:
    As an interim alternative, I have been able to setup & connect to the ASA using clientless vpn (web-ssl), and from there getting over to my WHS2011 server...-but the problem is, I have no way of knowing, or updating my DDNS once that IP changes since the ASA keeps blocking the return traffic to theh outside interface. My only assumption is that becasue I am using a single dynamic IP (outside interface) that it has nothing to re-direct the traffic to....???
    Thank You for any help you can provide!!
    k/r

    Hi,
    I cant really help with the DDNS portion but I would imagine you already have that sorted out.
    The ASA configurations however seem a bit off to me.
    Here is what you should configure
    STATIC PAT TO HOST SERVICES
    There are some changes that need to be done to both ACL and NAT configurations. First of the NAT configurations for each port require their own "object network" to be configured.
    Also since you are using a DHCP address from the ISP to act as the NAT address then you can use the keyword/parameter "interface" in the actual "nat" command. This basically tells the ASA that it should use whatever IP address is currently on the "outside" interface of the ASA. So you wont have to configure any separate "object network" for the public IP address every time it changes.
    Also, with regards to the ACL configurations. You should only configure one ACL per interface in the "in" direction. So all the rules you need to configure for traffic inbound from the Internet need to be in the same ACL that you then attach to the "outside" interface with the command "access-group"
    object network WEBSERVER-TCP80
    host 172.16.0.2
    nat (DMZ,outside) static interface service tcp www www
    object network WEBSERVER-TCP443
    host 172.16.0.2
    nat (DMZ,outside) static interface service tcp 443 443
    object network WEBSERVER-TCP4125
    host 172.16.0.2
    nat (DMZ,outside) static interface service tcp 4125 4125
    access-list outside_acl extended permit tcp any object WEBSERVER-TCP80 eq www
    access-list outside_acl extended permit tcp any object WEBSERVER-TCP443 eq https
    access-list outside_acl extended permit tcp any object WEBSERVER-TCP4125 eq 4125
    access-group outside_acl in interface outside
    DYNAMIC PAT FOR LANs and DMZs
    The above NAT configurations only handles the NAT for situations where the remote hosts on the Internet contact your DMZ server.
    If you want to configure Dynamic PAT for all your LAN and DMZ users which basically enable them to use the "outside" interface public IP address for Internet traffic, then you could configure this single "nat" configuration
    nat (any,outside) after-auto source dynamic any interface
    This would enable Dynamic PAT for all users behind the ASA
    I am not sure if you will run into problems since you are using a single public IP address and trying to forward TCP/443. This port is both used for SSL VPN and ASDM management of the ASA.
    If you want to change the default port of the ASDM management you can use this command
    http server enable
    If you want to change the default port of SSL VPN you can use these commands
    webvpn
    port
    Naturally before doing either of the above changes, make sure that you are not relying to them for management purposes if something was to go wrong. If you have SSH management access to the ASA then it should naturally be ok.
    I am not sure if all of the above are enough to get your setup working but it should be the basics. Naturally if there is still problems after the above suggestions it might be helpfull to see the current ASA configurations. For example NAT might not work if the ordering of NAT rules is wrong even though the actual configurations are otherwise valid.
    Hope this helps
    Please do remember to mark a reply as the correct answer if it answered your question.
    Feel free to ask more if needed
    - Jouni

  • Can we create a dynamic action for Training and Event Management???

    Hi All
    i need to configure automatic email generation for an employee when he gets booked for a training program in the training and event management module. can we use a dynamic action for it? and how to configure it?? I also guess that i have to use the Feature MAILS for it. but i am not sure abt it and also not sure how to configure it. I will really appreciate if someone can provide me with a step to step configuration for the same. Its urgently sought.
    Thanks and Regards

    Notifications in T&E are done through Workflow.Dynamic Actions are only for PA Infotypes.
    ~Suresh

  • How to extend dynamic selection for Logical Database PNPCE

    Hi All,
    I need to extend dynamic selection for Logical Database PNPCE. Can someone able to help with steps?
    Thanks
    Ranjith

    Hi All,
    I need to extend dynamic selection for Logical Database PNPCE. Can someone able to help with steps?
    Thanks
    Ranjith

  • Dynamic Configuration for determining filename

    Hi ,
    I am using dynamic configuration for determining the filename sent by the sender
    I am using the following code::
    int i = 0;
    DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
    String ourSourceFileName = conf.get(key);
    if  (ourSourceFileName.equals("data.txt"))
    for (i = 0 ; i < 1 ; i++)
    result.addValue(ourSourceFileName);
    i have also 'checked' filename in set Adapter specific message propertiesas  in sender communication channel.
    But Still it is not working.
    Please provide some help on it.
    Thanks & Regards
    Nilima

    Hi,
    Michal
    In SXMB-MONIthe response part contains DYNAMIC CONFIGURATION node
    and it displays::
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    <!--  Response
      -->
    <SAP:DynamicConfiguration xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileName"><b>try1.txt</b></SAP:Record>
      </SAP:DynamicConfiguration>
    please sir provide some help on it.
    Thanks once again.

  • Dynamic Configuration for two file adapters communication channels

    Hello Experts!!!!!!
         In one of the interface in my landscape, I am using two file adapters for creating two files with different names and at two different destination on F.T.P.
    However the receiver service for both the communication channel are same.
    In message mapping I am using multi mapping to create two files out a single message.
    Now i have a requirement of changing file path and file name using dynamic configuration for both the comm channel.
    When i doing dynamic coniguration for both the comm. channel. My interface is creating two files but with same name and on same destination which is set for second communication channel through dynamic configuration.
    Here, I guess the second dynamic configuration is over writing the first dynamic configuration and hence creating two files with same name and at same destination.    
    Please suggest, if separate dynamic configuration for separate communication channel of same receiver service can be done?
    Thanks & Regards,
    Amol

    Thanks for your prompt responses!!!!!
        Is there any way, By which in dynamic configuration I can find out the communication channel name and then change its parameter.
    I mean if iam using say comm. channel A and B.
    Then in dynamic configuration for A, I will first take communication channel A by calling it and then change its path/file name.
    and then do samething for comm. channel B in its dynamic conf.
    Regards,
    Amol

  • Dynamic Header for a website.    DOUBLE POINTS FOR ANSWER!!

    I don't even know where to start with this one, let me try explain this:
    I am looking for ideas on how to create some sort of dynamic header for an affiliate website, we have launched a new affiliate program for http://www.africancures.com/ the affiliate program is done through 1shoppingcart.com and each affiliate is given an ID like:
    http://www.1shoppingcart.com/app/?af=812264
    Once the affiliate signs up they choose their own website URL like: mikeshealth.com, then we point the affiliate URL mikeshealth.com to http://www.1shoppingcart.com/app/?af=812264 which in turn comes to our main website: http://www.africancures.com/ now here is where the problem comes in, how do I make the website display Mikes Health instead of African Cures .
    I hope I was able to explain this well enough as it seems to be a bit confusing to me when I write it down. I really hope there is someone out there who has worked on something like this before or if there is someone who thinks they know how to do this.
    Thank you
    So here is something else I was thinking of, but I am not much of a programmer anymore:
    Have a list of all the affiliate ids and their corresponding website names, eg:
    Affiliate ID=812264 Website name= Mikes Health, then when someone comes to the site the jave works out which affiliate id sent them to the site, eg
    Get(AffiliateID)from Refering.URL then Display.Header(AffiliateID) on main page, do you think you could help me now Sabre150?

    I'm still trying to see what this has to do with Java. Each host name such as mikeshealth.com will need to be registered with name servers with the IP address of www.1shoppingcart.com. Your web server will then need to be configured to perform perform any mapping.
    Again, what has this to do with Java?

  • Dynamic select for all entries?

    Hi!
    Is it possible to do a dynamic SELECT FOR ALL ENTRIES IN... command?
    sg. like:
      DATA:
        select_text TYPE string,
        from_text TYPE string,
        where_text TYPE string.
      SELECT FOR ALL ENTRIES IN <gt_table1> (select_text)
      into corresponding fields of table <gt_table2>
      FROM (from_text)
      WHERE (where_text).
    Thanks and Best Regards,
    Tamas

    Hi,
    you can use the Dynamic Selects for FOR ALL ENTRIES, but i think you may need to use the correct Internal table to match the tabel structure
    Regards
    Sudheer

  • Error editing task sequence: Failed to load dynamic properties for class "SMS_TaskSequence_ApplyWindowsSettingsAction" From XML into WMI

    I've started getting an intermittent error editing my Windows 7 OSD task sequence.  Sometimes I can open the TS to edit, but when I try to apply changes I get the error.  Other times I get the error when trying to open the TS.  If I try again
    right away, I still get the error, but if I wait a few minutes and try again sometimes it will open the TS. 
    The error reads:
    ConfigMgr Error Object:instance of SMS_Extended Status{Description = "Failed to load dynamic properties for class \"SMS_TaskSequence_ApplyWindowsSettingsAction\" from XML into WMI";Error Code = 2147943746;File = "e:\\qfe\\nts\\sms\\siteserver\\sdk_provider\\smsprov\\ssptspackage.cpp";Line = 3454;Operation = "ExecMethod";ParameterInfo = "SMS_TaskSequencePackage";ProviderName = "WinMgmt";StatusCode = 2147749889;}
    Coinciding with this error, I show the following entries in the TaskSequenceProvider.log file: 
    [PID: 7608] Invoking method SMS_TaskSequence.LoadFromXml
    TaskSequenceProvider
    Failed to protect memory buffer, hr=0x80070542
    TaskSequenceProvider
    Failed to load dynamic properties for class "SMS_TaskSequence_ApplyWindowsSettingsAction" from XML into WMI 0x80070542 (2147943746)
    TaskSequenceProvider
    Failed to load node Apply Windows Settings from XML into WMI 0x80070542 (2147943746)
    TaskSequenceProvider
    Failed to load children steps for node "PostInstall" from XML 0x80070542 (2147943746)
    TaskSequenceProvider
    Failed to load children steps for node "Execute Task Sequence" from XML 0x80070542 (2147943746)
    TaskSequenceProvider
    Failed to load children steps for node "" from XML 0x80070542 (2147943746)
    TaskSequenceProvider
    Failed to load XML for the task sequence into WMI 0x80070542 (2147943746)
    TaskSequenceProvider
    [PID: 7608] Done with method SMS_TaskSequence.LoadFromXml
    TaskSequenceProvider
    Setting status complete:  status code = 0x80070542; Failed to load dynamic properties for class "SMS_TaskSequence_ApplyWindowsSettingsAction" from XML into WMI
    TaskSequenceProvider
    I exported the task sequence and checked in "object.xml" for the "ApplyWindowsSettingsAction", to see if there was something odd in the xml, but I don't find anything that jumps out as being wrong.  Here's the section of XML for
    that step.  I've removed identifying info, and replaced it with a generic term in bold.
    <step type="SMS_TaskSequence_ApplyWindowsSettingsAction" name="Apply Windows Settings" description="" runIn="WinPE" successCodeList="0" runFromNet="false"><action>osdwinsettings.exe /config</action><defaultVarList><variable name="OSDLocalAdminPassword" property="AdminPassword"></variable><variable name="OSDComputerName" property="ComputerName">%_SMSTSMachineName%</variable><variable name="OSDProductKey" property="ProductKey"></variable><variable name="OSDRandomAdminPassword" property="RandomAdminPassword">false</variable><variable name="OSDRegisteredOrgName" property="RegisteredOrgName">COMPANY NAME</variable><variable name="OSDRegisteredUserName" property="RegisteredUserName">COMPANY NAME</variable><variable name="OSDServerLicenseConnectionLimit" property="ServerLicenseConnectionLimit">5</variable><variable name="OSDTimeZone" property="TimeZone">Central Standard Time</variable></defaultVarList></step><step type="SMS_TaskSequence_ApplyNetworkSettingsAction" name="Apply Network Settings" description="" runIn="WinPEandFullOS" successCodeList="0" runFromNet="false"><action>osdnetsettings.exe configure</action><defaultVarList><variable name="OSDDomainName" property="DomainName">DOMAIN.COM</variable><variable name="OSDJoinPassword" property="DomainPassword"></variable><variable name="OSDJoinAccount" property="DomainUsername">DOMAIN ACCOUNT</variable><variable name="OSDEnableTCPIPFiltering" property="EnableTCPIPFiltering" hidden="true">false</variable><variable name="OSDNetworkJoinType" property="NetworkJoinType">0</variable><variable name="OSDAdapterCount" property="NumAdapters" hidden="true">0</variable></defaultVarList></step>
    Is there any other log I should check for a clue on this issue?  What could be causing this error?

    Thanks for sharing that!  I tend to save contacting MS support until after I've exhausted other options.  I'm always afraid that I'll spend the $500 to open a case and then it turns out to be something simple that I would have found if I had just
    kept working on it myself a little longer.
    It looks like that link is for an update released in February as KB3023562.  I downloaded and installed it. I'll try opening/editing/saving the task sequence a few times today to see if the issue is resolved.  
    After I had already installed it, I thought to look up that update in configmgr.  The update is listed as superseded by 2 other updates.  The newest of those is KB3046049, which just installed last night with the other March patches, so it's possible
    that I didn't need to install KB3023562 after all.  

Maybe you are looking for