Dynamic Send Port : The FILE send adapter cannot open file C:\Temp for writing. Details: Access is denied.

Hi All,
We have requirement of using ESB toolkit and transforming incoming xml file to edi format. So, we are using ItinerarySelectReceiveXML pipeline for receiving the input from the input location and "EDISend" pipeline for transforming it into EDI and
send it to destination.
Now, the receive pipeline is picking up the file, but it is not processed and sent to destination.
And, we are getting an Access Denied error from Dynamic send port.
Error Description :
The FILE send adapter cannot open file C:\Users\Public\Temp for writing.
Details: Access is denied.
Any Immediate solutions/suggestions are appreciated...Thanks.
Anand

The difference between dynamic and static port would be send handler. For dynamic port, default send handler will be used and for static port the one configured on the port will be used, could you validate this configuration.
Also sometimes, administrative privileges are not "real" administrative privileges and company admins will have limited permissions on C Drive folders. Try writing to some other folder to isolate the issue.
Regards, Ajeet Kumar MCTS Biztalk Server

Similar Messages

AS2 error The FILE send adapter cannot open file

I have AS2 setup under biztalk. I have receive port which listen to HTTP adapter and keep listening on web site.Then there is corresponding send port which just write that file in folder . Send port just have filter for Receive adapter name.
It works fine, but some time I get error message
The FILE send adapter cannot open file <folder name\guid.txt > for writing.
Details: The system cannot find the path specified.
I am not able to understand what is error for this? Please help me to figure-out this.

Specifying the Backup transport is not going to solve the problem. Specifying the backup transport in this case is something like addressing the symptom of the issue and not finding the solution to root cause of the issue.
As you specified, if the mentioned error only happens some time but not always. In this case, the message "The
FILE send adapter cannot open file <folder name\guid.txt > for writing." would just be a warning message. Just by setting the retry in the send port will solve the issue. i..e Since this issue occurs rarely, it may be short lived glitch.
So by setting the retry count (lets say 3 times) with retry interval (let say 5 mins), this issue can be easily mitigated. You would not lose the message. So during the glitch you would get this message as warning, send port will retry "after specified
retry interval so after 5 mins", so by that time chances of files transfer is high. So this problem can be easily handled just by having retry count and retry interval in send port.
But you need to find the actual cause for this issue or you need to find the permanent resolution for this issue.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

I keep on getting the message 'AppleScript Editor cannot open files in the "AppleScript Editor Document" format' when I try download software?

Is there a way to still download these programs?

Firefox reports that it is my default browser. I changed the default browser to Chrome and then back to Firefox, in case that's what you meant by "redo." Right-clicking and picking Firefox in the Open With menu works, but double-clicking the file or just picking Open in the right-click menu does not.
I don't know why this is. Could it be due to a version update? I've noticed that Google Notifier's "Go to Inbox" no longer opens up Gmail in Firefox either.

PDE-PLI038 Cannot open file for use as a PL/SQL library

Hi,
We are using oracle 12 .0.4 on RHAS 4
I am trying to compile a .pll file with the following code
frmcmp_batch module=$AP_TOP/patch/115/sql/apacrndb.pls userid=apps/apps module_type=LIBRARY;
but it's returning the error
PDE-PLI038 Cannot open file for use as a PL/SQL library
Thanks
Umair

Umair,
What is the issue about?
Usually, it would be required to run the pls files to recreate certain objects (mainly packages) in the database, and you run the pls file from SQL*Plus as apps/applsys user.
Please update the SR and confirm with Oracle Support what the action plan you need to follow to resolve the issue.
Regards,
Hussein

I am trying to open CR2 files from a Cannon EOS 1DX camera in Photoshop CS6 and I have already updated the Camera Raw Plug in but Photoshop is still giving me the cannot open files dialog box? Help?

I am trying to open CR2 files from a Cannon EOS 1DX camera in Photoshop CS6 and I have already updated the Camera Raw Plug in but Photoshop is still giving me the cannot open files dialog box? Help?

Canon 1DX support was added to ACR in version 6.7, 7.1. An updated CS6 should be at level ACR 8.6. If your ACR is not at level 8.6 try using CS6 menu Help>Updates. If that does not install ACR 8.6 try downloading the ACR and DNG 8.6 converter and see if ACR 8.6 will install into your CS6.
Adobe - Adobe Camera Raw and DNG Converter : For Windows
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh

I am in the middle of a job using CS 6, but at the same time opening the Creative Suite apps. I created an InDesign file in CS 6, saved it, and now I can't open it. I'm getting this message: Cannot open file because it was saved with a newer version of A

I am in the middle of a job using CS 6, but at the same time opening the Creative Suite apps. I created an InDesign file in CS 6, saved it, and now I can't open it. I'm getting this message: Cannot open file because it was saved with a newer version of Adobe InDesign CC (10.1). You must use that version or later to open the file." AARRGGHH! So how do I access the file?

Sounds like you opened and saved it in CC, so now you need to go back to CC and either complete the project there, or export to IDML to take it back into CS6.

I am suddenly unable to open my pictures in Adobe Photoshop. It gives the following message: The document "Tina-19.jpg" could not be opened. Photoshop cannot open files in the "Adobe Photoshop JPEG file" format. What does this mean? I have opened my phot

I am suddenly unable to open my pictures in Adobe Photoshop. It gives the following message: The document “Tina-19.jpg” could not be opened. Photoshop cannot open files in the “Adobe Photoshop JPEG file” format.
What does this mean? I have opened my photos in Adobe Photoshop for years and suddenly I get this message and can't open any of my pictures

JoeLib wrote:
You type way faster than me Gene.
Well, not necessarily in this case.
According to the time stamp, Gene posted his answer a bit over three hours before you did, Joe.
Gene's post: Dec 29, 2014 5:54 PM
Joe's post: Dec 29, 2014 8:57 PM

IMovie for Mac: "iMovie cannot open files in the "iMovie for iOS Project" format."

Question, asked professionally
When will iMovie for Mac be able to open iMovie for iOS projects?
Question, asked snarkily
Any reasonable expectation that we will ever be able to edit projects--created in iMovie on our fancy new expensive phones--in iMovie on our fancy new expensive laptops?
Specs
iPhone 6 Plus (contract-free, 128 GB)
iOS 8.1.2
iMovie for IOS 2.1.1
MacBook Pro (Retina, 15-inch, Mid-2014)
OS X Yosemite 10.10.1
iMovie for Mac 10.0.6
Error Messages
iMovie for Mac: "iMovie cannot open files in the "iMovie for iOS Project" format."
iMovie for iOS: "An error occurred during export."
Frustration
Manufacturer: Apple (a multibillion dollar company)
The year: 2015
Hours lost: Three Weeks
Total costs for both devices: $4,000
Background Details
I just wasted thousands of dollars on these two hardware devices by making the rookie mistake of assuming projects were compatible across iMovie applications. However, the exported .iMovieMobile project files are in an incompatible iMovie for iOS Project format that iMovie for Mac cannot import. So I am stuck with a 15 GB .iMovieMobile project file--for an hour-long+ video--that I created and I was editing on my iPhone for weeks that I can no longer edit on my iPhone due to an error, nor potentially rescue the lost hours on my Mac, the sole reason I purchased it one day ago. The reason I can no longer edit the project on the iPhone is because iMovie for iOS suddenly stopped displaying the video of the project in preview, external display, etc. The clip snapshots remain visible and the audio remains audible, but the video appears fully black. Any attempt to export the video at any resolution generates an error message. (This error applies only to this project; other projects export without issue.) I can save to and from iTunes or iCloud without issue, but import into iMovie for Mac is unavailable for this latest version. Deleting and reinstalling the app does not resolve the issue. Nothing has resolved this issue; so I purchased the Mac as a last attempt, and it appears that I will have to begin the meticulously painful process of recreating the video from scratch with all the titling, sound effects, precise edits, transitions, organization, etc. This video was to surprise my mother for her birthday with "this is your life" footage, including my late father. It may seem like a small first-world problem, but such things carry big emotional impacts. What began as such a wonderfully intuitive and joyful experience has descended into a soul-suffering nightmare of catastrophic proportions. This software grinch stole christmas.
Likely Suspect
I believe this originated from Apple's confusingly designed iTunes client that removed videos used by iMovie for IOS during a sync, which I successfully restored back to the iPhone. This apparently resulted in iOS seeking and then claiming to find all of the videos, but somehow a bug in the coding causes the audio to play but not display video, and no way to resolve the bug from an enduser standpoint. I was hoping that iMovie for Mac would allow me a workaround, but I'll never know because the iOS and Mac formats are currently and dishearteningly incompatible.
Suggestions
I never performed a full backup of the iPhone, but I don't believe any of the iCloud nor local backups actually backup iMovie projects themselves anyway. (That's a fail.) So one must back them up manually to iTunes or iCloud.
MANUALLY BACKUP YOUR PROJECTS DAILY, IF NOT HOURLY.
MANUALLY BACKUP YOUR PROJECTS BEFORE IMPORTING OR SYNCING FROM ITUNES.
MANUALLY BACKUP YOUR PROJECTS BEFORE IMPORTING VIDEO CREATED OUTSIDE OF YOUR IOS DEVICE.
Resolutions
Hope Apple fixes this problem soon? Perhaps.
Return the Mac to Apple, if they allow? Perhaps.
Someone in this community will provide a magical workaround--that I haven't already attempted? Perhaps.
As unlikely these options may be, I shudder to imagine that I may be forced to suffer no resolution and $3,000+ completely down the drain, because if iMovie for IOS worked as intended, I wouldn't have ever purchased the Mac as a last ditch effort to rescue the project. It meant that much to me to surprise my mother by attempting to retrieve this project file from oblivion--but to no avail.

I appreciate you taking the time to copy and paste boilerplate responses to increase your points in this forum, but I've already read all those support articles in depth; but you have barely read my post at all. Please don't guess a fix. Only someone with the latest versions of iMovie, iOS, iPhone, Yosemite, and MacBook Pro is qualified to troubleshoot this, because anyone would immediately see that the following option no longer exists:
Open iMovie on your Mac, and choose File > Import > iMovie for iOS Project.
Read my post before you reply: It clearly says in the title and within my post that I can neither export nor import through iTunes without receiving an error message. So your response neither solved my question nor helped me whatsoever.

Finder cannot open files in the "volume" format.

I had to downgrade from the second Yosemite beta in order to run one of my applications for work that didn't run on Yosemite. I've successful reinstalled Mavericks to the chagrin of finder not working at all. Whenever I mount a DMG I get "Finder cannot open files in the “volume” format." Also, whenever I click to open a folder or a new window in finder, it just crashes and relaunches. I'm going to try to do a fresh install of Mavericks and recover from a backup. Let me know if you guys have faced this same issue and found a solution.
I also had to regain admin privileges for my user which I have done successfully.

I fixed my problem by installing Mavericks again. No need to fully restore.

INDD CS6 error: "InDesign cannot open files in the "InDesign CS5.5 Document" format.

Working in CS6 on Mac OS X 10.7.5: When I double click an INDD file in the Finder, I get the following error from InDesign:
"The document "doc name" could not be opened. InDesign cannot open files in the "InDesign CS5.5 Document" format."
This just started recently and I have not been able to figure out why. I have not updated INDD or OS X. I can't think of anything else that changed, other than maybe a Java update. Have not updated to the latest OS yet.
The files I'm trying to open are files I created with CS6 - as recent as a few minutes ago. I can open them fine using the File>Open command in InDesign so I can open them, but I can't open them by double clicking them in Finder or dragging them to the INDD icon in the dock.
The info in Finder's "Get Info" window says they are CS6 files set to open in CS6 and I have permissions to read and write. They are not locked.
This is not incapacitating, but rather annoying and slows me down since this is one of the most common ways I open files.
Any suggestsion would be appreciated.

Probably won't work because it sounds like an OS problem of some sort, but you can try trashing the prefs. See Replace Your Preferences

CS5 InDesign cannot open files in the InDesign CS5 document format

I'll be working in InDesign CS5 with no problems then at some point I'll double click on an InDesign file and a window comes up and says - InDesign cannot open files in the InDesign CS5 document format. Sometimes when this happens I have to completely reboot my whole system before I can get InDesign to function correctly. Is this a flaw with CS5? Did not happen with previous versions. It doesn't always happen but I can't figure out what causes it. Would appreciate anyones help. I'm getting to really HATE InDesign!!

I have not uninstalled and reinstalled, but I did just switch over to another workstation using Time Machine. The previous system was Leopard. This one is running Snow Leopard.
I'm not sure how to parse this. When you say "switch over to another workstaiton using Time Machine" do you mean, "started using another machine that happens to be using Time Machine for backups and is also running 10.6 instead of 10.5"?
Or do you mean, "Used the Time Machine program to upgrade from 10.5 to 10.6?" If you mean the second one, well, I can't say I am surprised that things are messed up. And that would make your problem rather different than the other posters, which is good reason for you to have started your own thread (and thus your own solution)....
I'm a little bit leary of getting in and changing things in Terminal, without understanding what I am changing. Plus this is a workstation at work, so if I screw something up, that is not a good things, and I don't have time to spend a day fixing things back up again, with the way our workload is.
Well, you can find a lot of marginal documentation about lsregister and Launch Services, but I wonder whether your understood the ramifications of messing with Time Machine (or maybe I have misinterpretted you!). I'd be surprised if you found another way to fix this, other than uninstall/reinstall.
Good luck.

How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tri

How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tried to reopen and now it won't work. I am using Adobe InDesign CS5. It is the only version on my comp. I have tried opening on another comp & copying the file – same error comes up. PLEASE HELP

First check the version of the document with Jongware's script "Identify.jsx" (ExtendScript/JavaScript).
You can find it here:
[Ann] Identify Your InDesign File
If it is CS 5.5 or above, you need someone to open it in the version the script says and export an IDML representation from that. Another way would be to install a 30days version of CS6 or above (CC) and do it yourself.
In regards of the script showing a result for InDesign files higher than CS6:
CS7 = CC v9
CS8 = CC v10 = CC-2014 or CC2014.1
Uwe

ITunes cannot open files in the "MP3 Audio File" format

Lately I've been getting this error that iTunes can't open MP3 files. It happens when I try to double click on an MP3, however, if I click and drag the MP3 into my iTunes library it opens fine. Not a huge problem....just a nuisance.
Running iTunes 10.0.1

I suddenly have this same problem with MacOS 10.6.7 and iTunes 10.2.2. Clicking on a tune in a folder gets the prompt "The document xxxx.mp3 could not be opened. iTunes cannot open files in the MP3 audio format."
Dragging the tune into iTunes will open it, so there's no problem with it being a "trouble file" that needs validating with some external app. I believe this is a new glitch that came with iTunes 10.2.2. It's workable but quite irritating when trying to manage an iTunes library that includes 28,000-plus songs.

I have my photos iPhoto but my iPhoto library is empty. when clicked message reads could not be opened image capture cannot open files in the photo library format. How do I get my photos back into my library?

I have my photos in iPhoto but my iPhoto library is empty.When clicked message reads could not be opened image capture cannot open files in the photo library format. How do I get my photos back into my library?

When what is clicked?
There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

My FaceTime seemed not working and keep telling me The document "IMG_3054.JPG" could not be opened. FaceTime cannot open files in the "JPEG image" format. I clicked OK but it pop-up again. So that I can't turn off my computer at all.

When I tried to restart my computer, FaceTime will pop-up and a warning message The document “IMG_3054.JPG” could not be opened. FaceTime cannot open files in the “JPEG image” format. I tried to clike OK but this worning message keeping pop-up and I can not quit FaceTime. So that I can't turnoff or restart my computer.
Can someone help?

The next time that happens, try this keyboard shortcut.
Command + Option + Esc
That way you can "force quit" the Facetime App.

Dynamic Send Port : The FILE send adapter cannot open file C:\Temp for writing. Details: Access is denied.

Similar Messages

Maybe you are looking for