Dynamic Sender File Name

Hi,
Its a File to ABAP Proxy Scenario.
The files would be processed differently depending on the file name which would be dynamic.
It would suffice if the file name can be made visible in the payload.
Does any one have any idea on how to implement this without creating a file adapter module? This method would make it complex.
Thanks,
Rosine.

Hi,
If yor are on SP14,
pls have alook at below blog.
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
if you are lesser SP level, than
1. you can ask for the file name in payload from source.
2. You have to use adapter module for the same.
Regards,
Satish

Similar Messages

Dynamic sender file name Pattern and collecting into one file

Hi Experts,
Could you please let me know how to achieve below scenario.
1)     File Directory: TEMP: files: test1,test2,ign1,ign2..etc.
2)     Get the files of pattern test*
3)     Received files test1, test2.
4)     Club contents of file Hemanth1, Hemanth2.
Ex: test1 contains------REC1
      test2 contains------REC2
OUTPUT FILE contains REC1,REC2.
5)     Pass OUTPUTFILE and filenames (test1,test2) to R/3.
PS: Please dont give references of blogs..I went through most of them could n't finad anything helpful.
My concern is how to collect files into one file and sending filename pattern..
Thanks in advance..

Hi Experts,
Could you please let me know how to achieve below scenario.
1)     File Directory: TEMP: files: test1,test2,ign1,ign2..etc.
2)     Get the files of pattern test*
3)     Received files test1, test2.
4)     Club contents of file Hemanth1, Hemanth2.
Ex: test1 contains------REC1
      test2 contains------REC2
OUTPUT FILE contains REC1,REC2.
5)     Pass OUTPUTFILE and filenames (test1,test2) to R/3.
6) Suppose poling is for 2 minutes..I dont want to read the files which I already read again (I dont want to delete or modify source directory files)
PS: Please dont give references of blogs..I went through most of them could n't finad anything helpful.
Thanks in advance..

Dynamic Receiver file name in AS2 adapter

Hi Experts,
How to get dynamic receiver file name in AS2 adapter. We need receiver file name same as of sender file name.
We tried selecting dynamic attributes file name but we are getting followin error in CC.
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: com.seeburger.xi.connector.queue.TaskBuildException: Mandatory attribute dtAS2FileName is not present in XI message., Mandatory attribute dtAS2FileName is not present in XI message.
Thanks,
Hari

hi hari,
You can't do it manually. As both adapter are in different context.
You can go with UDF to slove ur problem.
Just extract the input file name using Dynamic configuration
Store that in some variable.
Use same name in the dynamic file name in AS2 receiver. Below code might be useful.
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create( "http://seeburger.com/xi/common/dtAS2FileName", "DYNFILENAME");
conf.put(key,strfilename);
Thanks
Jai
Edited by: Jaideep Baid on Apr 9, 2010 9:16 AM

Configure receiver file name as Sender file name

Hi All,
In PI7.1. We have scenario(file to file). Here the sender system send multiple files and In the receiver system we need to populate the same filenames as Sender file Names.
Could you please let me know is there a configuration to have Receiver file schem name As like sender file names.
Thanks in Advance,
Naga.

Hi Naga,
This can be achieved using either variable substitution or Dynamic Configuration by enabling Adapter Specific Message Attributes in sender and receiver file channels.
If the sender file name and receiver file name needs to be exactly same then just check Adapter Specific Message Attributes in advanced tab of both sender and receiver channels. Check on File Name under that.
Lot of help over this is already available in sdn, kindly serach and you will get lot of helpful blogs and wikis
Regards,
Gautam Purohit
Edited by: Gautam Purohit on Apr 16, 2010 11:26 AM

How to keep same sender file name for receiver mail attachement

Hi,
i am working with File to Mail scanario. There i want to pick a flat file from native file system and then send it as email attachment. Now i am able to send the file but the flat is getting converted as an xml file. is there any method to keep the same sender file name and type for receiver mail attachment. i am not using any mail package. i am using XI payload and keep attachments.
Thanks in advance.
-Siva

Hi,
Yes,With out using the mail package u can send the Mail Attachments to the receiver side,
In that case no need of Integration Repository objects.
Chck this links.
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
/people/community.user/blog/2006/09/07/email-reporting
/people/community.user/blog/2006/09/08/email-report-as-attachment-excelword
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
If u dont get ur requirement then let me know ur Mail id i will send u a Doc.
Regards,
Phani
Reward points if Helpful

Dynamic attribute file name

Hi All,
I am trying to use dynamic attribute file name using UDF in message mapping:
String filename = null;
filename = "Yahoo";
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key1 = DynamicConfigurationKey.create("http://seeburger.com/xi/common" , "dtSubject");
conf.put(key1,filename);
return "";
But its just giving me the name on the receiver side as in the sender side.
I have checked FileName in Dynamic attributes in the reciever adapter.
Regards,
XIer

your return statement looks like return "";
Return the filename that you have assigned inside the UDF and can be achieved by
conf.put(key1,filename);
return filename;
Do refer this blog as well
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14

Dynamic Logo file names in PO XSL-FO stylesheet

We have different company logo files for different operating units. Hence , we require to use a dynamic logo file name in XSL-FO template.
When I use the below for a single file it works.
<fo:inline>
<fo:external-graphic content-width="50pt" content-height="50pt" src="url({'${OA_MEDIA}/Logo_medium_COMCEL.jpg'})" />
</fo:inline>
However, I would need to make the filename dynamic.
When a tried usng an xsl variable tos tore fielname, it didnt work.
Any pointers as to how we can achieve that would be helpful

Thanks for your quick reply Dave, I appreciate your time.
But I couldn't test the new template as I was neither able to create a new PO nor was able to run the PO Output for communication Report. When I tried to create a PO the Purchase Order form did not open saying I am not setup as an employee, even the PO Output for communication did not give any LOV for the PO's.
I tried to define employee name in the employee's login
information (System administrator/Security/User/Define) for my user, but some how my name doesn't appear in LOV. Any help is appreciated.
Thanks,
Sharmila

Include the file dynamicly by file name

in my jsp,I want include another jsp dynamicly
<%@ include file="thefile.jsp" %>
thefile.jsp should be dynamic like:
<%=String filename=="thefile.jsp" %>
<%@ include file=filename%>
I know above is not working since file only take static name.
is there any way to include the file dynamicly by file name?

String path = "..."; // to the ressource to include
javax.servlet.RequestDispatcher dispatcher
= getServletContext().getRequestDispatcher(path);
dispatcher.include(request,response);

Part of sender File name at the receiver side?

Hello All,
My requirement is like this.
iam picking the file from FTP server and place the file in another FTP server with out mapping.
I need to use part of sender file name to create the receiver side along with current date.
for example.
sender side file name : LM01000008.txt
recevier side file name need to generate : LM01dd/mm/yyyy
Please let me know how to achive this.
i tried with the blog given below, but partial file name is not possible with that blog.
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417100)ID0229698450DB11989196758750510369End?blog=/pub/wlg/6400
Thanks and Regards,
chinna

Hi Chinna,
Use this code
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
SimpleDateFormat dateformat = new SimpleDateFormat("yyyyMMdd");
String timestamp = dateformat.format(new Date());
String newfilename=fileName+timestamp+".txt";
// change to new file name
conf.put(key, newfilename);
return "";
Regards
Suraj

Accessing the sender file name in the response email

Hi,
I have an asynchronous proxy scenario wherein I am calling an outbound proxy within an inbound proxy.
Basically a file is sent from an external partner and response is sent back to them if there are any errors. Also email notification will be sent and that email should include the sender file name so that they can know which file is erroneous and can resend that file after making changes. Any help will be appreciated.
Many Thanks.

Hi,
Have a look just two threads below yours !!
File recr Adapter : How to set target directory based on sender interface ?
See "Adapter-Specific Message Attributes" for a Sender File Adapter
http://help.sap.com/saphelp_nw70/helpdata/EN/e3/94007075cae04f930cc4c034e411e1/content.htm
I suppose your flow is:
1. File -> PI -> proxy_req     (request)
2. proxy_resp -> PI -> Mail   (response)
Thanks to "Adapter-Specific Message Attributes" ofr a Sender File Adapter, you will be able to store filename in DynamicConfiguration and then you will able to use a UdF to catch the source file and provide it somewhere in your proxy_req.
After for the returned flow "2. proxy_resp -> PI -> Mail   (response)", your proxy_resp has to returned to PI the filename providen with the 1st step.
And then, In PI you will be able to send by email the source filename.
Regards.
Mickael

Creating dynamical flat file name in mapping?

Hi.
I know about the variations on how to use an input parameter and/or sysdate to create a dynamic output file name in a mapping.
My challenge is nearly the same, but I cannot make OWB generate the correct code.
Problem:
- got a one column table that holds an identifier in a string field
- got a function that reads and returns said identifier
- imported function into OWB
- trying to use the function call in the Flat File Operator's Target Data File Name, e.g. fixedfilename||fn_get_id()||sysdate||'.ext
OWB creates the code:
UTL_FILE.FOPEN(
'my_location',
'fixedfilename'||fn_get_id()||'_'||SYSDATE||'.ext',
'w',
32767
However, when compiling the package code, it returns the warning:
ORA-06550: PACKAGE BODY, line 2214, column 29: PLS-00201: identifier 'FN_GET_ID' must be declared
which results in an error when trying to execute the mapping.
I've tried substituting the function call in the FOPEN call:
myId := fn_get_id();
UTL_FILE.FOPEN(
'my_location',
'fixedfilename'||myId||'_'||SYSDATE||'.ext',
'w',
32767
and this works fine, the mapping creates a file with the desired filename. But obviously not a good solution rewriting the generated code all the time....
Anyone solved something similar?
Could I use an input parameter and the autogenerated function GET_<PARAMETER>?
But can I set the value of an input parameter inside the very same mapping?
Regards,
-Haakon-

(It always helps writing out one's problems...)
I managed to get it working :-)
Added an input parameter to the mapping, and gave the outgroup variable a default value by calling my imported function.
Then concatenated the implicitly generated function (GET_PARAMETER) in the Target Data flat file name.
I now have a target file name that changes according to a departement id stored in a parameter table.
Regards,
-Haakon-

When someone other than myself downloads an image from my web album, a dynamically generated file name replaces the original file name. How I can prevent the original file name being replaced during the downloading process?

When someone other than myself downloads an image from my web album, a dynamically generated file name replaces the original file name. How I can prevent the file name being changed during this downloading process?

Hi Glenyse,
Here are my steps.
1. I upload multiple image (jpg) files onto my photo album.
2. I select the "sharing" by email option for this album.
3. I enter the recipient's email address.
4. The recipient receives my message and clicks on the link.
5. The recipient accesses my photo album and clicks on one of the images.
6. The image opens up to its own screen.
7. The recipient selects the "download" and then save file option.
Here is the part I do not understand. For some reason, during this "download" process, the original name which I have given to the file is replaced by different name. So I was hoping that someone knows how to prevent the file name from being changed during the "download and save" process.
Much appreciated if you can help me find a solution to this problem.
Mary

Dynamic Configuration File Names

Hi,
I have a RFC->XI->File scenario.
I have to put the target files names based on the calculation of values in 2 fields in the input.
I tried using Dynamic Configuration in my message mapping for this.
This is the code:
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create(u201Chttp://sap.com/xi/XI/System/Fileu201D,u201CFileNameu201D);
String MyFileName = a + "_" + b +".xml";
conf.put(key, myFileName);
I checked ASMA in both the sender RFC adapter as well as the receiver file adapter.
But it never works.
I saw the dynamic configuration tab in SXMB_MONI but i can see only the RFC destination parameter.
Cant see the file filename parameter.
What is the problem here?

No need enable ASMA on RFC sender adapter.
See if the file channel is activated after selecting ASMA with FileName.
The UDF might not be use in the mapping. Check this.
Edited by: Praveen Gujjeti on Feb 23, 2010 1:05 AM

Dynamic Remote File Name for delivering report via FTP

As many of the threads had the same query about how to pass dynamic filename while scheduling a report using ftp option.
My requirement is to append the 'ID' which is the identifier of the report with the template name in the Remote Filename section.
Eg. if ID is 1-34RT5 and the filename should be 1-34RT5_abc.pdf
I tried appending date(%m%d%y) and it worked for me, but how can I append a parameter?
Is it possible in stand alone BI Publisher 10.1.3.4?
Pls let me knw if someone has implemented this. Would really Appreciate.

for bursting, can I change dinamically the file name?
I have to burst an invoice report to send to different customer and store to a FTP archive folder.....
can I change dinamically this name?
can I select fields to name the pdf file name?
can I change object and text of the e-mail?
tks a lot to all
Andrea

Dynamically generating file names for 2 File ( 1: 2 mapping transformation)

Hi ,
I have a scenario Proxy to File(FCC) with 1:2 transformation in message mapping ie 1 sender and 2 receiver interface ....
1 Message mapping
1 Operation mapping
1 RD , 1 ID and 2 file receiver channels and 2 receiver agreements.
I need to dynamically generate the filename say abc.(first 9 characters of mesg id) and xyz.(first 9 characters of mesg id)
I used dynamic configurations with ASMA settings, created 2 UDF assigned each of these to header node of r receiver message types.
Here, I guess the second dynamic configuration is over writing the first dynamic configuration and hence creating only one file with xyz.(first 9 characters of mesg id)
name .
Need your valuable inputs
Thanks and regards,
Pavithra

As dynamic configuration doesnot work in case of 1:n mapping what you need to do is
Create a field Filename in your source data structure
Create a1:1 mapping between your source structure and source structure
In that 1:1 mapping on the target structure assign UDF for file name
Now this target structure will be used as a source structure in your next 1:2 mapping
Under operation mapping add first the 1:1 mapping for source and then the multimapping
regards
Ninad

Dynamic Sender File Name

Similar Messages

Maybe you are looking for