Dynamic Source location using FIle Adapter

Hi Experts,
I having a scenario of file to file, my problem is how can I configure the comm channel to where the file will be pulled wherein the path is defined during the runtime process in certain ABAP program(defined from selection screen)? Is it possible?
Thanks,

Hi
No mapping is involved here. your source data should contain the directory path. Use the path in the variable substitution ,
Enable the variable substitution and,
payload:MT_test/dir_path/
Regards
Ramg

Similar Messages

Polling using File Adapter in BPEL

My requirement is to constantly poll a directory location using file adapter for a particular filename. If the file is found then pick the file else continue polling.
Any thoughts on the approach is appreciated.

Refer the below, File adapter is capable of doing that.
http://docs.oracle.com/cd/E23943_01/integration.1111/e10231/adptr_file.htm#CIAHDAEB
for File Polling refer *4.3.1.4 File Polling* section
*7) Give points - it is good etiquette to reward an answerer points (5 - helpful; 10 - correct) for their post if they answer your question.*
Thanks,
Vijay

Dynamically construct Target/Source Directory in File Adapter

Hi All,
Is it possible to Dynamically construct target/Source Directory in File Adapter? If yes can anyone plz provide details about the same.
regards
Vinay

Hi vinay,
have a look @ these threads..u may get some help!!
Re: Dynamic directory name in Receiving File adapter
Dynamic FileName and Directory - UDF
Re: Dynamic Directory and File Naming in Receiver Adapter
Re: target directory in file adapter
Regards
BILL

Error in using file adapter valves

Hi,
I'm working on Oracle SOA Suite 11g (11.1.1.4). I'm doing an exercise on using adapter valves for encryption. I need to write an encrypted file using File adapter. I created pipeline.xml and also specified property in jca file. And added bpm-infra.jar file to classpath.
Also, I've compiled SimpleEncryptValve.java and created a jar file and placed it in lib directory of domain.
Pipeline.xml is as below :
<?xml version="1.0"?>
<pipeline xmlns="https://www.oracle.com/adapter/pipeline">
<valves>
<valve>valves.SimpleEncryptValve</valve>
</valves>
</pipeline>
writeFile_file.jca contents are as below :
<adapter-config name="writeFile" adapter="File Adapter" wsdlLocation="writeFile.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/FileAdapter"/>
<endpoint-interaction portType="Write_ptt" operation="Write">
<interaction-spec className="oracle.tip.adapter.file.outbound.FileInteractionSpec">
<property name="PhysicalDirectory" value="D:\PoC\FileAdapters"/>
<property name="Append" value="false"/>
<property name="FileNamingConvention" value="new_%SEQ%.txt"/>
<property name="NumberMessages" value="1"/>
<property name="PipelineFile" value="pipeline.xml"/>
</interaction-spec>
</endpoint-interaction>
</adapter-config>
Got below error while testing. What could be wrong in valve configuration ?
<Jun 6, 2011 7:29:25 PM IST> <Error> <oracle.soa.adapter> <BEA-000000> <File
pter Project2:writeFile [ Write_ptt::Write(body) ]
oracle.tip.pc.services.pipeline.PipelineException: Invalid configurations for valves
at oracle.tip.pc.services.pipeline.PipelineImpl.validate(PipelineImpl
va:237)
at oracle.tip.pc.services.pipeline.PipelineFactory.instantiateModel(P
lineFactory.java:198)
at oracle.tip.pc.services.pipeline.PipelineTemplate.newPipeline(Pipel
Template.java:39)
at oracle.tip.adapter.file.outbound.FileSender.getPipeline(FileSender
va:378)
at oracle.tip.adapter.file.outbound.FileSender.sendNonBatchedSerializ
late(FileSender.java:254)
at oracle.tip.adapter.file.outbound.FileInteraction.executeFileWrite(
eInteraction.java:623)
at oracle.tip.adapter.file.outbound.FileInteraction.execute(FileInter
ion.java:426)
at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAInteracti
nvoker.executeJcaInteraction(JCAInteractionInvoker.java:311)
at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAInteracti
nvoker.invokeJcaReference(JCAInteractionInvoker.java:548)
at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAInteracti
nvoker.invokeAsyncJcaReference(JCAInteractionInvoker.java:508)
at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAEndpointI
raction.performAsynchronousInteraction(JCAEndpointInteraction.java:491)
at oracle.integration.platform.blocks.adapter.AdapterReference.post(A
terReference.java:247)
at oracle.integration.platform.blocks.mesh.AsynchronousMessageHandler
Post(AsynchronousMessageHandler.java:142)
at oracle.integration.platform.blocks.mesh.MessageRouter.post(Message
ter.java:194)
at oracle.integration.platform.blocks.mesh.MeshImpl.post(MeshImpl.jav
15)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorIm
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAc
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingRefle
on(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invok
inpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proce
ReflectiveMethodInvocation.java:149)
at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseE
tAspect.java:71)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proce
ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDyn
cAopProxy.java:204)
at $Proxy299.post(Unknown Source)
at oracle.tip.mediator.serviceEngine.MediatorServiceEngine.post2Mesh(
iatorServiceEngine.java:1120)
at oracle.tip.mediator.service.BaseActionHandler.requestProcess(BaseA
onHandler.java:200)
at oracle.tip.mediator.service.BaseActionHandler.requestProcess(BaseA
onHandler.java:94)
at oracle.tip.mediator.service.BaseActionHandler.requestProcess(BaseA
onHandler.java:74)
at oracle.tip.mediator.service.OneWayActionHandler.process(OneWayActi
andler.java:47)
at oracle.tip.mediator.service.ActionProcessor.onMessage(ActionProces
.java:64)
at oracle.tip.mediator.dispatch.MessageDispatcher.executeCase(Message
patcher.java:137)
at oracle.tip.mediator.dispatch.InitialMessageDispatcher.processCase(
tialMessageDispatcher.java:503)
at oracle.tip.mediator.dispatch.InitialMessageDispatcher.processCases
itialMessageDispatcher.java:401)
at oracle.tip.mediator.dispatch.InitialMessageDispatcher.processNorma
ses(InitialMessageDispatcher.java:284)
at oracle.tip.mediator.dispatch.InitialMessageDispatcher.processCases
itialMessageDispatcher.java:251)
at oracle.tip.mediator.dispatch.InitialMessageDispatcher.dispatch(Ini
lMessageDispatcher.java:143)
at oracle.tip.mediator.serviceEngine.MediatorServiceEngine.process(Me
torServiceEngine.java:848)
at oracle.tip.mediator.serviceEngine.MediatorServiceEngine.post(Media
ServiceEngine.java:624)
at oracle.integration.platform.blocks.mesh.AsynchronousMessageHandler
Post(AsynchronousMessageHandler.java:142)
at oracle.integration.platform.blocks.mesh.MessageRouter.post(Message
ter.java:194)
at oracle.integration.platform.blocks.mesh.MeshImpl.post(MeshImpl.jav
15)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorIm
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAc
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingRefle
on(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invok
inpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proce
ReflectiveMethodInvocation.java:149)
at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseE
tAspect.java:59)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proce
ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDyn
cAopProxy.java:204)
at $Proxy299.post(Unknown Source)
at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComp
nt.doMessageProcessing(WebServiceEntryBindingComponent.java:1271)
at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComp
nt.processIncomingMessage(WebServiceEntryBindingComponent.java:859)
at oracle.integration.platform.blocks.soap.FabricProvider.processMess
(FabricProvider.java:113)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcess
(ProviderProcessor.java:1187)
at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementa
n(WebServiceProcessor.java:1081)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessi
ProviderProcessor.java:581)
at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServic
ocessor.java:232)
at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProc
or.java:192)
at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.j
:459)
at oracle.integration.platform.blocks.soap.FabricProviderServlet.doPo
FabricProviderServlet.java:507)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.
(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSec
tyHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.
a:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl
va:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:1
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java
3)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatfor
il.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.
a:94)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.jav
61)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl
va:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java
6)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl
va:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAc
n.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAc
n.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authentic
dSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.ja
120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebA
ervletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServl
ontext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImp
ava:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
>

Hi Surfraz,
Did you go through this link?
http://docs.oracle.com/cd/E21764_01/integration.1111/e10231/adptr_file.htm#BABCFDGC
Regards,
Neeraj Sehgal

Dynamic UserID/Password for file Adapter

Hi,
How to use dynamic UserId/Password for file adapter ?
(Sender/Receiver)
In our case the Id/Pwd of FTP Site changes freguently.
Can anyone help.
Thanks in Advance
Regards
Chemmanz

Hi Chemmanz,
>>>>In our case the Id/Pwd of FTP Site changes freguently.
but do you have those passwords in the message payload?
if not then you will still have to fill it somewhere right?
BTW
the only way would be to use java proxies and write a simple ftp adapter inside it (or your own adapter)
but this is not possible in standard I believe
Regards,
michal

Picking up file sequentially using file Adapter

Hi Experts,
I am working on a scenario, where two type of files are coming to the source directory namely "Data File" and "Flag File".
First, all the data Files will be coming and after that one flag file will be coming containing names of all the data files.
I am using two seperate Communication channels using "File Adapter" to pick these files. One for all tha data Files and one for Flag File.
As per our requirement we need to pick all data files first and then the flag file and process then in the same sequence.
Is there any solution to do it without BPM.
Regrads
Pradeep

Hi Pradeep,
I don't think there is any mechanism where in you can direct the sequence of files to be picked ,more over you are using two communication channels .So both will act individually as per the poll interval.For your requirement. BPM Pattern Collect Message suits better as it always waits for Stop message to finish the integration process.In your case stop message can be your Log file.
Then all the data files will get processed at a time as soon PE receives the Stop msg (Log file).
Thanks,
Ram.

Pooling data from an XML file to another XML file using File Adapter

Hi,
I am trying to Pool data from an XML file to another XML file using File Adapter. I have added "Target Namespace" in both the XML and XSD.The problem is "At the destination given in the FileAdapter" only a blank XML file is created and it doesnot have any data.
Kindly suggest me some methods
Thanks in Advance.

Ok here is a solution with external tables.
SQL> CREATE DIRECTORY my_xml_dir AS 'E:\oracle\Log_files\UTL_AKIVATST'
2 /
Directory created.
SQL> DROP TABLE my_xml_et
2 /
Table dropped.
SQL> CREATE TABLE my_xml_et
2 ( EMPNO NUMBER,
3 EMPNAME VARCHAR2(10),
4 JOB VARCHAR2(10),
5 HIREDATE DATE,
6 SAL NUMBER
7 )
8 ORGANIZATION EXTERNAL
9 (
10 TYPE ORACLE_LOADER
11 DEFAULT DIRECTORY my_xml_dir
12 ACCESS PARAMETERS
13 (
14 records delimited by "</EMP>"
15 badfile my_xml_dir:'empxt%a_%p.bad'
16 logfile my_xml_dir:'empxt%a_%p.log'
17 FIELDS
18 (
19 filler char(2000) terminated by "<EMP>",
20 EMPNO char(2000) enclosed by "<EMPNO>" and "</EMPNO>",
21 EMPNAME char(2000) enclosed by "<ENAME>" and "</ENAME>",
22 JOB char(2000) enclosed by "<JOB>" and "</JOB>",
23 HIREDATE char(2000) enclosed by "<HIREDATE>" and "</HIREDATE>",
24 SAL char(2000) enclosed by "<SAL>" and "</SAL>"
25 )
26 )
27 LOCATION ('emp.xml')
28 )
29 PARALLEL
30 REJECT LIMIT UNLIMITED
31 /
Table created.
SQL> SELECT * FROM my_xml_et
2 /
EMPNO EMPNAME JOB HIREDATE SAL
7369 SMITH CLERK 17-DEC-80 800
7499 ALLEN SALESMAN 20-FEB-81 1600
This is the XML file i used emp.xml
<EMPLOYEES>
<EMP>
<EMPNO>7369</EMPNO>
<ENAME>SMITH</ENAME>
<JOB>CLERK</JOB>
<HIREDATE>17-DEC-80</HIREDATE>
<SAL>800</SAL>
</EMP>
<EMP>
<EMPNO>7499</EMPNO>
<ENAME>ALLEN</ENAME>
<JOB>SALESMAN</JOB>
<HIREDATE>20-FEB-81</HIREDATE>
<SAL>1600</SAL>
<COMM>300</COMM>
</EMP>
</EMPLOYEES>
Use this external table to insert into your table.
Thanks,
Karthick.

File Read and Write using File Adapter in Bpel

In Bpel Process i am using File Adapter ( Schema is Opaque) for read and write the file contents. i am able do successful deployment and read, write function in first time deployment, after that again i tired to run the application, its not going to write the content of file, its only writing the file with out data's or content in that file.
Please help me...
Saravanan

Hi Eric
In my domain.log file having the following details. In this file im unable to find out what the exact problem. Please look at this and help me.
<2008-01-22 18:25:42,024> <INFO> <default.collaxa.cube.compiler> validating "C:\product\10.1.3.1\OracleAS_1\bpel\domains\default\tmp\.bpel_BPELProcess2_1.1_298e83988d77b6640c33dfeec11ed31b.tmp\BPELProcess2.bpel" ...
<2008-01-22 18:25:49,850> <INFO> <default.collaxa.cube.engine.deployment> <CubeProcessFactory::generateProcessClass>
Process "BPELProcess2" (revision "1.1") successfully compiled.
<2008-01-22 18:25:49,914> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Loading JCAActivationAgent for {portType=Read_ptt}
<2008-01-22 18:25:49,914> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> JCAActivationAgent::load - Locating Adapter Framework instance: OraBPEL
<2008-01-22 18:25:49,930> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> JCAActivationAgent::load - Done loading JCAActivationAgent for processId='bpel://localhost/default/BPELProcess2~1.1/
<2008-01-22 18:25:49,930> <INFO> <default.collaxa.cube.engine.deployment> Process "BPELProcess2" (revision "1.1") successfully loaded.
<2008-01-22 18:26:02,698> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> JCAActivationAgent::uninit Shutting down the JCA activation agent, processId='bpel://localhost/default/BPELProcess2~1.0/', activation properties={portType=Read_ptt}
<2008-01-22 18:26:02,698> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Adapter Framework instance: OraBPEL - performing endpointDeactivation for portType=Read_ptt, operation=Read
<2008-01-22 18:26:02,698> <INFO> <default.collaxa.cube.ws> <File Adapter::Outbound> Endpoint De-activation called in adapter for endpoint : D:\MAXIMUS_Project_Softwares\jdevstudiobase10132\jdev\mywork\MyLabs\BPELProcess2\in
<2008-01-22 18:26:02,698> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> JCAActivationAgent::init - Initializing the JCA activation agent, processId='bpel://localhost/default/BPELProcess2~1.1/
<2008-01-22 18:26:02,698> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> JCAActivationAgent::initiateInboundJcaEndpoint - Creating and initializing inbound JCA endpoint for:
process='bpel://localhost/default/BPELProcess2~1.1/'
domain='default'
WSDL location='rd.wsdl'
portType='Read_ptt'
operation='Read'
activation properties={portType=Read_ptt}
<2008-01-22 18:26:02,698> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Adapter Framework instance: OraBPEL - endpointActivation for portType=Read_ptt, operation=Read
<2008-01-22 18:26:02,730> <INFO> <default.collaxa.cube.activation> <File Adapter::Inbound> Endpoint Activation called in File Adapter for endpoint: D:\MAXIMUS_Project_Softwares\jdevstudiobase10132\jdev\mywork\MyLabs\BPELProcess2\in
<2008-01-22 18:26:02,730> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Adapter Framework instance: OraBPEL - successfully completed endpointActivation for portType=Read_ptt, operation=Read
<2008-01-22 18:26:02,890> <WARN> <default.collaxa.cube.activation> <File Adapter::Inbound> PollWork::run exiting, Worker thread will die
<2008-01-22 18:26:04,171> <INFO> <default.collaxa.cube.ws> <File Adapter::Outbound> Managed Connection Created
<2008-01-22 18:26:04,171> <INFO> <default.collaxa.cube.ws> <File Adapter::Outbound> Connection Created
<2008-01-22 18:26:04,171> <INFO> <default.collaxa.cube.ws> <File Adapter::Outbound> FileInteraction Created

Not able to map contents of xml to output using file adapter

Hi
i m not able to map the output of file adapter to a variable when reading an xml. the data is coming in the file adapter output variable but it is not mapping to other variable in assign or transform activity.I m using jdeveloper 11.1.1.4.0.Can anbody help me plz.
Regards
Sourbh

i am using file adapter as reference to synchronously read an xml file. i am able to see the flow trace in em console. the output variable of file adapter contains the data but when i m trying to assign the value to a variable i getting error. saying that some xpath is not returing any value.
i tried with transform activity also but same case is there.

Using file adapter, got "Sender Agreement not found" error

I used file adapter in my CC and defined all the necessary objects. When I tried to test the configuration and I kept getting "Sender Agreement" error.
Also the chache is cleared too, searched the forum already, couldn't find any clue
Not sure what I did wrong

Hi,
First things first, ensure you have an agreement for each single Communication Channel you have
and that they are correctly associated.
If they are created and associated, you may try the cache refresh with the link:
http://host:j2eeport/CPACache/refresh?mode=full
Kind regards,
Caio Cagnani

Appending in file and supplying file name at run time using File Adapter

Hi,
Can we use File Adapter to write in a file in append mode. i.e. a BPEL process opening a file appending some text and closing the file each time it called.
Another query is can we create the file at run time with the supplied file name?

In order to append to a file, we can use Append="true" in the interaction spec for the File/Ftp adapter.
<jca:operation
FileType="ascii"
PhysicalDirectory="/home/adapter/output"
FileNamingConvention="OutputFile.txt"
NumberMessages="1"
Append="true"
>
Filename we can specify in wsdl...

Error while trying to move file using File adapter

Hi, I am trying one scenario to move file from one remote folder to other using file adapter as mentioned in heading 4.5.11.1 at http://download.oracle.com/docs/cd/E21764_01/integration.1111/e10231/adptr_file.htm#CHDGFAAB. But I am receiving the below error:
<messages><input>
<Invoke1_FileMove_InputVariable><part name="Empty" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><empty xmlns="http://xmlns.oracle.com/pcbpel/adapter/opaque/"/></part></Invoke1_FileMove_InputVariable></input><fault>
<bpelFault><faultType>0</faultType><bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "*JCA Binding execute of Reference operation 'FileMove' failed due to: Exception occured when binding was invoked.*
*Exception occured during invocation of JCA binding: "*Could not instantiate InteractionSpec oracle.tip.adapter.file.outbound.FileReadInteractionSpec due to: Cannot set JCA WSDL Property.**
**Error while setting JCA WSDL Property.**
**Property setSourcePhysicalDirectory is not defined for oracle.tip.adapter.file.outbound.FileReadInteractionSpec**
**Please verify the spelling of the property.**
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.
</summary></part><part name="detail"><detail>Cannot set JCA WSDL Property.
Error while setting JCA WSDL Property.
Property setSourcePhysicalDirectory is not defined for oracle.tip.adapter.file.outbound.FileReadInteractionSpec
Please verify the spelling of the property.
</detail></part><part name="code"><code>null</code></part></bindingFault></bpelFault></fault><faultType>
<message>0</message></faultType></messages>
Please provide any insight if someone have tried this.
Thanks,
rps

Hi rps,
Your interaction-spec className seems to be incorrect (FileReadInteractionSpec).
<interaction-spec className="oracle.tip.adapter.file.outbound.FileIoInteractionSpec">
</interaction-spec>Please try with the above interaction spec and let me know the outcome.
Regards,
Neeraj Sehgal

"encoding = UTF-8" missing while writing XML file using file Adapter

Hi,
We are facing an unique problem writing xml file using file adapter. The file is coming without the encoding part in the header of xml. An excerpt of the file that is getting generated:
<?xml version="1.0" ?>
<customerSet>
<user>
<externalID>51017</externalID>
<userInfo>
<employeeID>51017</employeeID>
<employeeType>Contractor</employeeType>
<userName/>
<firstName>Gail</firstName>
<lastName>Mikasa</lastName>
<email>[email protected]</email>
<costCenter>8506</costCenter>
<departmentCode/>
<departmentName>1200 Corp IT Exec 8506</departmentName>
<businessUnit>1200</businessUnit>
<jobTitle>HR Analyst 4</jobTitle>
<managerID>49541</managerID>
<division>290</division>
<companyName>HQ-Milpitas, US</companyName>
<workphone>
<number/>
</workphone>
<mobilePhone>
<number/>
</customerSet>
</user>
So if you see the header the "encoding=UTF-8" is missing after "version-1.0".
Do we need to configure any properties in File Adapter?? Or is it the standard way of rendering by the adapter.
Please advice.
Thanks in advance!!!

System.out.println(nodeList.item(0).getFirstChild().getNodeValue());

How to read MS-Excel file by using file Adapter

hi friends,
I have an issue on read Operation by using file Adapter.
It is necessary to read excel file by using file adapter. But in the native format of file adapter there is no option to read excel type of files.
So friends, please help me how to solve this problem?
Thanks in Advance..

See also this post:
Read Excel File Using FileAdapter in SOA 11g
It might help you

Can we process files with attachments using File Adapter

Hi All,
I want to process files which have attachments using File Adapter.
Is it possible to process such files?
May be using standard modules?
Regards,
CBKLP

Assuming you are talking about sender FILE channel....you can make use of PayloadSwapbean provided by SAP (standard module)...to read data from attachment.
Regards,
Abhishek.

Dynamic Source location using FIle Adapter

Similar Messages

Maybe you are looking for