Dynamic Storage Bin

I receive materials in storage type 902 with movement type 101 with dynamic storage bin = purchase order number. Now I have to transfer this material to storage type 002 again with dynamic storage bin to be entered manually. This dynamic bin can have any number, for eg. I should be able to put sales order number or any other number.
How do I do this?
Your suggestions appreciated GURUS.

Hi Atul,
Create a TO with ref to the TR that has been created initially. Confirm the Transfer Order. This will clear your goods from dynamic storage location and it will move to the specified storage type if u have maintained the correct strategies. It will not move to another dynamic storage bin as you mentioned unless you issue the stock to prodn or if u have activated the Quality check. Hope this helps.
Reward if u find it useful
regards
Anand.C

Similar Messages

Creating dynamic storage bins

When you define a movement type, you can set up the system to create dynamic storage bins in the assigned interim storage area. In this case, the system uses the document number which triggered the stock movement as the coordinates for the interim storage bin.
For example, for a goods receipt, you can set up the system to use the purchase order number as the storage bin coordinates in the interim storage area for goods receipts.
These coordinates only exist as long as the quant is in the interim storage bin; afterwards, they are deleted.
Where do I do the config for the above scenario..
I tried creating bins for interim storage typees in LX20....after creating an interim storage area through referencing standard ones in IMG... I cant understand how the system creates dynamic bins for the movement type. Please help

LX20 is for static bins.
The dynamic ones are created automatically by the system when the stock is moved to the area.
In the movement type configuration in the WM:
(LE -> WM -> Activities -> Define movement types)
Select your movement type and warehouse and make sure the SCR box is checked
Also check that the field is mapped correctly for the dynamic bin in
LE-> WM -> Activities -> Define Requirements
Field Name is what is grabbed

Storage Bin for Interim Storage Type 902 for GR

Hi,
We know that the the dynamic storage bin for goods receipt for PO is the PO number. However, when we are posting GR, system creates TR with interim storage bin as material document number.
I looked into the movement type config. However, we can only state that whether interim bin should be cordinates or fixed bin or dynamic bin. It has no way to mention what that dynamic bin would be.
Can you please suggest a way to change the dynamic storage bin as PO number instead of material document number.
Thanks,
Shekhar

Dear Shekhar,
Could you please check in view V_T308 (transaction code OMNF) whether the indicator "Dynamic bin material document" is set for your warehouse number and requirement type B?
Best regards,
Christiane
Edited by: Christiane Schnellenbach on Apr 12, 2010 10:25 PM

Dynamic destination bin with Mov. Type 311-312 and Storage type 001?

Hello WM experts,
I'm tryng to determine dynamic destination bin with mov. type 311, when trasfering handling units from IM to WM storages (VLMOVE). First 311 transfer to St. type 921, and then 312 transfer from 921 to St. type 001. I don´t want to use a Fixed destination storage bin in St.type 001, I'd like to configure this like movement type 601, that create a dynamic destination bin using outbound delivery. Can be this possible?
Another question I have: Is possible to crearte individivual items with Source target quantity in alternate unit equivalent to 1 unit, in LT03. For example, the item 10 of my outbound delivery says 3 ST of XYZ material. But I want to crear 3 items with Source target qty. 1 ST. Is this possible with customizing or using an enhancement? ...
Why I want to find a way to do any of these things above, because when I have indivial intes in the TO, I can confirm them in RF (LM61) just pressing one button, I don't need to declare any difference, and makes my picking process faster.
Best regads, and thanks for you time and help.
Favio Del Castillo.

Hi Mohit ,
please check below link , you need to perform steps as given
http://help.sap.com/saphelp_470/helpdata/en/4d/2b90b043ad11d189410000e829fbbd/content.htm
also see the sales order subcontracting using the business addon
http://help.sap.com/erp2005_ehp_04/helpdata/en/c7/2587b8dad94c52854ccd28015dceb0/frameset.htm

Cancel (reverse) Return Order, PGR not possible due to storage bin in 904

Hi gurus hope someone can explain in detail with transaction what am I missing since I'm MM guy and dont know very well SD transactions but here's my scenario,
There is a return order with a delivery (1110500002), then PGI (651), this drive me to process a Tansfer Req to move it from 904 to 010 storage type, and then do the billing, up to here the process is going well.
The problem comes when trying to reverse the above described process, I start with reverse the bill sith VF11 and then try to cancel the PGI ( PGR) with VL09 but system says "Storage bin 001 904 1110500002 does not exist (Check your entry)"
This is why I'm trying to fix the issue as MM guy, but I don't know why the error comes, this bins in 904 should be dynamic and create temporaly the bin 1110500002 which is the delivery that was created when the first return order was created.
I dont know if this error is related to MM movement types or to some config at the delivery type, o maybe the process we are following is not the correct for this because in transaction OMLR for IM 651 there is WM 651 but for 652 IM it's WM counter part is the general GI 255 mvt type so
Just to mention what I think that need to happen for the reverse of the return process is to cancel the bill then cancel the delivery and at this point negative stock should come into 904 bin 1110500002 and the creation of a TR to move from 010 to 904 after doing this TO then stock in 904 will be zero.
Please advise on how this process should happen.
Regards.

Hi TQ,
Thanks for your reply, but I didn't understand what you mean with compare material master, compare it with what? And also I am not really sure that this could be the problem because I have this issue only when reversing the return, this means when I do the return the stock actually goes to 904 1110500002 so this means that the material has mantained correctly WM views in the material master.
Can you elaborate more in detail how you solved your error few months ago?
Thanks and regards

Determine destination storage bin from PP-form

Hello,
From an adobe form (based on PSFC_KANBAN) I try in the print program to determine WM-data. To be specific I need the way from the supply area (or other pp-data) to the destination storage bin (Table PKHD).
It would be very kind of You, if you could give me a hint.
Kind regards,
Benjamin

Benjamin,
I am not sure but may be you can see the program RLLS4100 or TCODE LS41.
With this report, you can create cycle lists which are assigned to a storage type.
You receive a list with the following information:
Production supply area
Material
Plant
Warehouse number
Warehouse type
Production storage bin
Dynamic destination storage bin
Staging indicator for production supply
Try also TCODE OP42 and PK05.
The discussion below might help you:
http://scn.sap.com/thread/3172596
Regards,
Ashvin

Storage Bin No same as PO no

Hi,
When I am doing GR of a WM managed material the storage bin no being for that material & mat doc is same as PO number.
Pl guide
VS

Why the Bin NO is same as PO NO:
1. Check the movement type
    SPRO>Logistic Excecution>Warehouse Management>Activities>Transfers->Movemnet Type
   If you click the movemnet type 101 for the warehouse you will find "SCR" box checked which is for the dynamic Bin.
2. Also Check the requirement for the movement type in the similatr way as mentioned above.
3.Now follow the path as mentioned below.
1. Check the movement type
    SPRO>Logistic Excecution>Warehouse Management>Activities>Transfers-> Requirement Type
Double Click on the Requirement Type
Check the combination of Warehouse and requirement type(taken from movemnet type as mentioned above)
Check if the field "Dyn. Bin. Mat." is checked , if yes then check the field name if its written as "MSEG-EBELN" then Purchase Order will be displayed as Bin NO. and if the field is
MSEG-MBLNR then material document no will be shown as the Bin No.
Please reward if you find it useful

Report for Material - Storage Location - Storage Bin

All SAP Gurus,
Is there any standard report available in which we can find out the storage bins for list of materials?
(We have not implimented Warehouse MAnagement)
Regards,

HI,
You need to have Warehouse management in place in order to view the storage bins for materials,
MMBE of MM cannot give you the idea of storage bins.
Hope this helps.
Regards,
Prasanna
Award pls if helpful.

Storage bin Capacity utilization is greater than 100%

Hi,
Via LS03N, I can found that some capacity utilization is greater than 100%, this must be incorrect, what's the reason? is there any report to update the capacity utilization for storage bin?
Kindly please advise.
Thanks

For the capacity checks, the remaining capacities or the used weight in the storage bin master data are updated with every putaway or picking. If you change the inspection method in the current operations or you change capacity or weight data of materials or storage unit types, you then need to make a comparison of the data. You can make this comparison with report RLS10200. First read the documentation before you start the report.

Not Printing the source storage bin in the layout

Hi Gurus
As i am printing the layout to pick the goods for delivery, in which iam not getting the source storage bin for some deliveries only. sometimes its picking and some times not, what has been the reason behind it. i have take the help of an Ababper to check the conditions if any for that filed. but i cannot find any.
Please help me,
Thanks in advance,

sorted out by setting the SPAD - Device types
format, just added the zxxx format to this and now it is working

T.code for viewing stock at storage bin

Hi all,
What is the t. code used for viewing the stock at storge bin?I know this is WM question but your help is appreciated.
Regards,
Shailendra

Hi,
Following are the T-Codes:
LS26   Warehouse stocks per material
LI05    Inventory History for Storage Bin
LX02   Stock List
LX03   Bin Status Report
MB52 List fo warehouse stocks on hand
Regards,
Suresh' D.

Creation of New storage bins for storage type 007 in Production

Hi Gurus,
Coudl you please give me a clairty, storage bins can transport from Qaulity or we have to create seperately from server to server like Qulity and production.
thx
r

Hello,
As correctly mentioned storage bins never transported from one environment to other. You have to create through LS10 or LS01N.
The bin structure can get transposted from one environment to other & then you can open the structure & create bins in numbers.The bin structure can be seen through LS10 & created through same transaction.
Regards,
Prashant

Inspection lot creation on storage bin

Hello all,
I am wanting to learn how to create an inpection lot of stock within a storage bin.
I ask because we have many storage bins in our warehouse location storing the same material.
If I do a MIGO 322 transaction in inspection lot there is no where to specify bin location, it looks at the warehouse as 1 storage location.
In the lower half of the migo screen there is a 'storage bin' section but it is blocked out and I cannot identify which storage bin I am wanting to inspect within that storage location.
I know I can create a transfer through LT01 however this still doesn't appear in QA32 inspection lots.
I want the bin location to stay in the same storage location but be flagged for quality inspection.
Thanks,
Chris
Edited by: gmanwizo on May 7, 2011 5:58 AM

Hi,
It seems you have both MM and WM activated. You have to assign storage locations to warehouse numbers in customizing, definition of organization step. Then when you do a 322, transfer requirements will be created by the system and you can transfer the material to a storage bin by turning the requirement into a transfer order. Assignment of new storage locations to warehouses may be tricky, you better ask for consulting on this matter.

Serial Numbers in A Storage Bin

Dear all,
In warehouse management we have serial numbers attached to each item in the warehouse and these items are batch managed. During goods receipt serial numbers are scanned using RF scanner and a transfer order is created for each item. We have a customer table to store the details like storage location and storage bin etc when they are first scanned in. There is no problem here.
If items are transferred from one storage bin to another using a transfer order, system is picking the serial numbers required for the transfer order posting. When corresposing material document is displayed using MB51, there is a tab for serial numbers that are included in this material document.
Is there any way to get all the serial numbers of the items stored at Storage Bin level?
Thanks and regards
Raj

Hi Christian,
Thanks for the reply.
In the mean time I was talking some more people here regarding this problem. Looks like there is no one obvious place where equipment serial numbers are stored.
Further digging in to SAP I could make out that the serial numbers get distributed to tables SER01 to SER07 based on the activity performed with key in OBJK. I think I will be able to get there.
I appreciate your time and reply.
Regards
Raj

Reg:creation of storage bin

hi,
i have created storage bin already with two or three coordinates, i have some requirement that it is possible to create six coordinate bin. if so then what is the possible standard template for that, and how much we can extend the coordinates.
Regards
Muthuraman.D

Give examples of the two or three co-ordinates and what you want to extend?

Dynamic Storage Bin

Similar Messages

Maybe you are looking for