Dynamic Subject Line not appearing in PO mail

Hi Experts,
In tcode ME28 when i get the list of POs to be released , I click on the release possible icon against the PO number. On clicking of this, a mail goes to the vendor of the PO.
My requirement is to change the subject line of this mail.
I have done all the required settings in NACE i.e. for this output, in the " Mail title & texts" , I have maintained the text and in the General data tab I have mentioned SAPMM06E as the program & TEXT_SYMBOL_REPLACE as the form routine.
Also in the Mail tab I have done the same : SAPMM06E as the program & TEXT_SYMBOL_REPLACE as the form routine.
But i am not able to get this dynamic mail text in the PO mail , instead of this text, the correspodnig PO number comes as the mail text.
In there anything that I have missed out ?
Please suggest.
Thanks in advance .

Hey ,
is there a code written which will is responsible for forming and sending this mail ? If so the you need to look inside this code and instead see where are you setting PO number in subject line. In that part of code you need to a variable which will hold this dynamic text which you want to send as subject line.
If you can share that code with me , I can help you further.
Hope this is helpful.
Regards,
Uma Dave

Similar Messages

Mail not appearing in notification center... Also, gears not appearing in the mail app.

I tried to configure my mac to enable it to receive mails in the notification center but cant. i have tried to send an email from other IDs but havent received any banner or alert while using my mac. i have checked the show alerts and banners in notification center. Do i have to keep the window of the mail app in a specific position to receive alerts in the notification centre? Also, the gears are not appearing in the mail app when i fetch for new mail. please help..

I'm also having this problem.
Notifications receives alerts from Reminders app, but not Mail.
I've set preferences in Mail for 'Inbox Only' and 'All Mailboxes', sent test mail from ISP webmail and Google (Mail is not setup to receive from this account) - still no notifications.
I had previously used Growl (v1.4) and GrowlMail very successfully (with 10.7), but while upgrading to Mountain Lion I was informed that GrowlMail was incompatible so I deleted it.
While testing this problem of not receiving Mail Notifications I have disabled Growl and rebooted.
Like others here:
Checked: Notifications setup
Checked: Mail setup
Rebuilt permissions
Rebooted
Any help would be very gratefully received.
Many thanks.

Mails sent to the iPhone (5S) do not appear in sent mail. Neither iOS nor OSX. I need detailed instructions IMAP and SMTP on iPhone and on OSX

Mails sent to the iPhone (5S) do not appear in sent mail. Neither iOS nor OSX. I need detailed instructions IMAP and SMTP on iPhone and on OSX

I have two accounts gmail.com and icloud.com.Only mails sent from iPhone not appearing in sent by IP or in OSX

Subject line not showing in mail

When I receive mail from a colleague send to me from her Exchange account to my Exchange account and I read this account from my MacBook Pro Retina using Mail, the subject line does not show up. Instead it says: (no subject).
When I look into the details of the mail, I can see that there is a line 'Thread-Topic: the subject my colleague put into the subject line'.
So the subject is there, but Mail doesn't show it. I can't figure out why this happens or what I can do to stop it.
The mails in question only have the subject line filled and no further content (there just short messages).
Any help will be appreciated.
Ed

This is a recurring problem with Exchange servers. Sometimes it's fixed by rebuildiing the mailbox. Another possible fix is to disable the account in the Mail preferences dialog, then re-enable it. Back up all data before making any changes.

Name of the attachment is not appearing in the mail!

Hi group,
I am using the FM SO_DOCUMENT_SEND_API1 to send the mail with an XSL attachment, it is working fine but the problem is the name of the XSL attachment is not appearing, please see the below code how i am using
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
    EXPORTING
      document_data              = gi_doc_data
      put_in_outbox              = 'X'
      sender_address             = lv_sender_address
      sender_address_type        = lv_sender_address_type
      commit_work                = 'X'
    IMPORTING
      sent_to_all                = v_sent_all
    TABLES
      packing_list               = gi_packing_list
      contents_bin               = gi_attachment
      contents_txt               = gi_message
      receivers                  = gi_receivers
I am passing the gi_packing_list-obj_name as XXX_<date>_<Time> and gi_packing_list-format as XLS. After executing the program the mail has been successfully sent and the attachment too, but the name of the attachment is not appearing. it just showing .xls
Any input regarding this is highly appreciated.
Thanks in advance

hi , suresh
in gi_packing_list
do like this,
gi_packing_list-obj_descr = XXX_<date>_<Time> .
for file name pass parameter in obj_descr.
Regards,
Arpit

Mail not appearing as HTML - Mail Adapter

Hello All,
I'm using the mail package in a receiver mail adapter. During mapping I format the content in HTML format, using < > form < and >. Also I set the content type of the mail package to text/html. However when the mail is received, the content of the mail is the html with tags, it does not appear as an html page. When I see the source the file still has the escape characters instead of < and >. But when I save this as an html file and open it, it appears as a web page.
Any thoughts?
Thanks,
Sandeep

HI,Specify whether you want to encode the content of the e-mail message. You have the following options:
·        None
·        base64 (default value)
·        quoted-printable
use quoted-printable
Coding of characters in e-mails that are not contained in the ASCII character set.
The code contains German umlauts and special characters
http://help.sap.com/saphelp_nw04/helpdata/en/6b/4493404f673028e10000000a1550b0/content.htm
Regards
Chilla
Message was edited by:
        Chandra Sekhar Chilla

Sent mail does not appear in sent mail folder

Hi. Odd problem. I have done a search for this but can't find an answer.
I have an IMAP account with PIPEX and mail will not display the sent messages.
Mail has 3 folders - Inbox, Sent, Trash.
IMAP account has 2 folders - INBOX and a sub folder sent-mail.
Inbox/INBOX syncs fine.
Nothing appears at all in Sent.
Sent messages sync ok, as (using finder) they appear in my library at myusername/library/mail/IMAP-(mylogin)/INBOX/sent-mail.imapmbox/Messages
For info, the inbox messages are stored at myusername/library/mail/IMAP-(mylogin)/INBOX.imapmbox/Messages.
For info again I have store sent messages on server selected in preferences (because I need to see them from another computer)
I have tried 'rebuild' several times on the inbox & the rebuild option is greyed out on the sent folder.
Can anyone help?
Thanks
Stringbag

Hi Stringbag.
This account requires INBOX to be put in Preferences > Accounts > Advanced > IMAP Path Prefix for Mail to handle it properly. Mailboxes on the server should not appear as subfolders of the account’s Inbox in Mail.
After having done that, Mail should be able to properly save sent messages on the server, but maybe in a mailbox different from where you want them to be stored. To fix that, select the desired folder in Mail, and do Mailbox > Use This Mailbox For > Sent.

Item billing plan lines not appearing in billing due list ...

Hello Team ,
I have one question on service contract billing plan. Contract has status released.
I have one contract which has header billing plan that is applicable at line item also.
1. At line item level billing plan two items are due for billing but in billing due list this line item does not appear. Some of the lines in Item billing plan are already billed.
Also at item billing plan there is no check (tick mark) for Header Billing Plan.
Can some one suggest what are the possible checks for item billing plan not appearing in billing due list.
Thanks ,
Nitn Patki

Hi Nitin,
Check the status of the line items.
Regards
Narayana

Sent mail not appearing in Internet mail box

I have recently been using Mail on iMac and while I can receive and view all emails on it. But strange thing is that whatever I sent from Mail on the iMac, it just appeared on the Mail Sent box but do not appear on the internet version of email sent box or anywhere in the internet version. I do have an iPhone and the sent mail from the iMac Mail cannot be found too. However, receiptents do receive my emails anyway. It is frustrating and disappointed that this happened and unable to do work on my iMac in this way especially when I am travelling and away from my desk.
Currently I am using Yahoo! .sg mail with IMAP and has checked thoroughly, including the outgoing server. Did many delete and re-installing but this does not seem to work. Maybe there are some steps that I have overlooked, or improper installation, could somebody help?
JChanSGP

I find that perhaps one message in ten is not saved to my sent folder. I am using .mac mail. I am storing sent messages on the server, draft messages locally.
It seems that some kind of timeout on port 143 prevents the message from being copied to the sent folder, although the message is actually sent.
This is clearly a bug. Even if there is a communication failure, the message should remain accessible somewhere, not drift off into the ether. It would be far preferable to risk sending twice by holding the outgoing message in drafts until the move to sent completes.

ICloud Mail Sent with iPad Not Appearing in Sent Mail

Hi Everyone,
For for the past few days, the email messages that I've sent with my iPad using my iCloud address do not appear in the iCloud Sent mail folder my iMac. But if I send an iCloud mail using my iMac, it does appear in the iCloud Sent mail folder on both devices. This problem does not occur using other IMAP accounts on my iPad. What's going on?
The other thing that may be relevant is that there appear to be two Sent mail folders that appear in the iCloud account on my iPad. One is Sent with the paper airplane icon and the other is Sent Messages with a folder icon. On my iMac, there is only the Sent mail folder with the paper airplane icon. Curiously, on the iMac have see some sent messages from both of those sent mail folders from the iPad.
I'm now concerned that some important iPad messages may not have been sent, and I now must backtrack and resend them.
Regards,
Gregory
OS X 10.9.4 on iMac
iPad 7.1.2

Most mail servers can be accessed in a web browser as well as in Mail. For iCloud, you go here:
iCloud Mail
Check for sent messages.

Grid Lines not appearing in Query

Hi all,
I have a query in BI 7.0. The problem is the Grid lines & the Formats are not appearing in the query i.e the row & column lines are not appearing. These were there before 2 weeks but now something has happened and it got changed. So, if i create a workbook from this query, the workbook also reflect the same format. Even if i make the format changes through excel functions, i could only save it as a workbook and it wont reflect in the query.
We are not able to identify exactly why this problem came. It doesnt have anything to do with the Package or patch. This problem occurs only for one query & all the other query formats are working fine. I compared the error free queries with the problem query but everything seems to be the same.
Please help me in solving this problem.
Thanks,
Murali

Hi Everyone,
The issue is solved. The option "Adjust Formatting after Refreshing" in the Query Properties was unchecked. I checked that & the problem is solved.
Thanks,
Murali

Missing Subject line for the Approval Notification Mail

Hi,
We use CUP 5.3 SP7. We have configured the system for role based approval. We found that the approval notification mail being sent without any Subject line. It's configurable to set the admin mail id, but couldn't find one to set the Subject.
We get the following content in the mail....
View <http://<host:port>/AE/index.jsp?verifyApproverLogin.do........................>
Can we set it somewhere from the configuration?
Regards, Anil

Hi Alpesh,
Thx for your reply..But i think you missed my point...Let me try to explain it again...
When we submit a request, the system triggers a notification mail to the approver(s). And this mail seems to be missing a Subject line... and it's shown to be sent from the System E-mail id we set at the SMTP server config.
I couldn't find a tab for setting the E-mail format for the first approver neither at the stage nor in the e-mail reminder configuration.
Perhaps, setting the next approver will help if i had a secondary approver. But we are using a single stage WF in CUP. Am i missing some config step here?
Regards,
Anil

Graduated Filter "lines" not appearing?!

Hi
Happily using latest Lr 3.3 but just noticed in the last few days that when I use the "graduated filter" function, the three lines do not appear onscreen, but after dragging the cursor across an image, and editing say exposure the image does alter. So the function is working but without the lines.
I've done all the obvious rebooting stuff, shut down other progs etc but no joy.
Anyone else had this, or know how to get the lines back?!
PS:
any ideas how to report this bug to Adobe?
thanks in advance
Edward

Ha! that fixes it
many thanks Jeff, I'll have to watch for this!

Spotlight Search for Reminders: Only references subject line, not Reminder Notes

Just shipped 20 large boxes from west cost to east coast, they're going to be sitting in the garage of where I'm staying for a month. Using the Reminders app, I created Reminder for each box, in the subject line the box number and tracking number. In the Notes field for each Reminder I entered the details of the box contents, thinking that I could later search for a particular item, find the Reminder for it and know what box it's in.
Wish I'd tested my theory as I've now discovered that while Reminders are searchable with Spotlight on my iOS devices, it only references the subject line -- Spotlight ignores Reminder comments. Bummer :-(

Hi benjitek,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iOS: Understanding Spotlight Search
http://support.apple.com/kb/ht3636
Cheers,
Judy

PDF'd Fillable Form / Checked Boxes do not Appear in E-Mail

Acrobat Pro 8.1.2, Windows XP, Word 2003
I made a doc in Word, created a form, added check boxes, all good. I fill out the form as needed, check specific boxes as needed, and submit via email to vendors to place orders.
Everyone gets the check boxes themselves, but several have said that none of the boxes are physically checked (X). All other entered info is present.
Thanks for any help.
KE

I'm sorry. I made the Word doc, then used Adobe Pro to convert the Word doc into a fillable form. Using Designer I added the check boxes. Saved and closed.
I open the form, fill it out, select certain check boxes, and email. The selected check boxes do not appear on some computers.
KE

Dynamic Subject Line not appearing in PO mail

Similar Messages

Maybe you are looking for