Dynamic table with header locked and vertical scrollbar problem.

Hi,
I have created a dynamic table with header locked.The sample code is as below.
<div style="width:910px ; overflow-x : scroll">
<h:panelgrid ...for header populated by binding to pagecode/>
<div style="width:910px ; height:200px ; overflow-y : scroll">
<h:panelgrid ...for data populated by binding to pagecode/>
</div>
</div>
The above piece of code serves the purpose.
There is an overflow in both x as well as y directions and scrollbars appear.But the y scrollbar can be seen only when the x-scrollbar is moved to the extreme right.
Does anyone have a solution so that both the scrollbars can be seen as soon as the table loads without the need to move x to the extreme right to see y?

wa_layout-grid_title = text-039.
    wa_layout-sel_mode = 'A'.
    APPEND wa_layout TO gs_layout.
    wa_layout-grid_title = text-039.
    wa_layout-sel_mode = 'A'.
    APPEND wa_layout TO gs_layout.
    wa_layout-grid_title = text-039.
    wa_layout-sel_mode = 'A'.
    APPEND wa_layout TO gs_layout.
  CALL METHOD gr_alvgrid1->set_table_for_first_display
      EXPORTING
        is_layout       = gs_layout
      CHANGING
        it_fieldcatalog = it_fieldcatalog1[]
        it_outtab       = <l_table>.
i am using like but its not accepting more than one line header in is_layout, is there any possibility to take like this.
Regards,
Mallikarjuna.

Similar Messages

  • Dynamic table with header on each page

    Hi,
    I am new to livecycle forms. I am not sure if I am asking a silly question but this is what I need to achieve.
    I am designing a pdf form using livecycle designer. Need to build a dynamic table using data from xml. The challenge is I need to have a signature button on each page and the button will be below the table. So if there are for eg. 100 rows of data, then the table should be split into 5 pages of 20 rows each page (each page should have the table header) or based on page content and the button should be on the bottom of each page. Is it possible to achieve this? Also any example/suggestion on implementing signature using signature pad would be greatly appreciated.

    Hi,
    For individual objects, like the button that you want to appear on each page, you should place this on the Master Page. Position the button at the bottom of the page and then make sure that you size the Content Area, so that the button is OUTSIDE of the content area. This way objects on the design page will not overflow over the button. See here: http://assure.ly/g0Wx7r.
    If you are using a Table object for your data, then you can set it to repeat the Header row, see the Object palette.
    If you are using ADEP Designer 10 (latest version of Designer) AND your users will have Acrobat X/Reader X (eg version 10.1), then you could use Flash object for a signature field. See the example here: http://assure.ly/rqCuEn. See "Assure Dynamics Map with Signature" example. Again please note that you will need Acrobat X/Reader X to view this.
    Hope that helps,
    Niall

  • Internal table with header line and work area.

    data:itab like LIKE bapimepoheader.
    DATA : BEGIN OF it_po_items OCCURS 0.
            INCLUDE STRUCTURE bapimepoitem.
    DATA : END OF it_po_items.
    DATA:it_input         TYPE STANDARD TABLE OF typ_input,
          wa_input         TYPE typ_input,
    LOOP AT it_input INTO wa_input WHERE poind = 'H'.
    CLEAR wa_po_header.
      wa_po_header-doc_type  = wa_input-bsart.
      wa_po_header-comp_code = wa_input-bukrs.
      wa_po_header-vendor    = wa_input-lifnr.
    CLEAR it_po_items.
      it_po_items-po_item = v_itemcount * 10.
      it_po_items-acctasscat = wa_input-knttp.
      it_po_items-material   = wa_input-matnr.
      it_po_items-plant      = wa_input-werks.
      it_po_items-quantity   = wa_input-menge.
      it_po_items-net_price  = wa_input-netpr.
      it_po_items-po_unit    = wa_input-meins.
      it_po_items-free_item  = wa_input-umson.
      it_po_items-tax_code   = wa_input-mwskz.
      it_po_items-gr_ind     = wa_input-wepos.
      it_po_items-gr_non_val = wa_input-weunb.
      it_po_items-incoterms1 = wa_input-inco1.
      it_po_items-incoterms2 = wa_input-inco2.
      it_po_items-vend_mat   = wa_input-idnlf.
      it_po_items-taxjurcode = wa_input-txjcd.
      it_po_items-item_cat   = wa_input-pstyp.
      APPEND it_po_items.
    here my doubt is whether i can move data from work area to internal table in this way?
    whether this is the correct approach or not?

    hii,
    u can define structure and make workarea ,internal table using that structure.
    for example
    types:begin of struct,
             declare all fields,
             end of struct.
    data:wa type struct,
           int_tab type standard table of struct.
    hope this will help u.

  • BADI cant use an internal table with header line

    hi,
         In BADI, we cant use an internal table with header line, and I am calling a function module which requires internal table as import parameter, now, the table I am passing is without a header line, So how to solve this problem ?

    You can use a type and then create an internal table of that type.
    types :
    begin of t_<example>
    *field list
    end of t_<example>
    data :
    gt_<table> type standard table of t_<example>
    pass this to the FM

  • Dynamicly creating an internal table with header line

    Hi experts,
    I am trying to do a read on an internal table using field symbols of type any table. To be able to read more than one row at once, I'd like to read it into another internal table (instead of just one line and instead of looping through them one by one).
    So far the following line rendered an error that the target internal table doesn't have a header line
    read table <fs_v_tab> WITH KEY (<fs_comp>) = <fs_param>-low INTO <fs_v_tab>.
    (also attempted using "<fs_v_tab>->*" & "<fs_v_tab>[]" to be silly)
    Based on the following article, I was wondering if it were possible to dynamicly create an internal table with header line.
    [http://help-abap.blogspot.com/2008/09/dynamic-internal-table-creation.html|http://help-abap.blogspot.com/2008/09/dynamic-internal-table-creation.html]
    Any help or tips on how to dynamicly filter an internal table field-symbol is greatly appreciated!

    Just read the online help:
    This statement reads a row from internal table itab.
    Or more exact:
    This statement reads one row from internal table itab.
    Therefore you can not read multiple lines into another table. The header line is needed to put the result in. And this is not what you intended, the result will be in the header line, not in the table itself.
    If the row to be read is not uniquely specified, the first suitable row is read. In the case of index tables, this row has the lowest table index of all matching rows.
    At least you have to do what you dont wanna do: looping.

  • Dynamic Creation of Internal table WITH HEADER LINE

    Dear,
    Please show me the way of creating Internal table WITH HEADER LINE dynamically..
    Thanks,
    Nirav

    <font color='blue'>Hi Parekh,
    Have a look at the sample program for Dynamic internal table
    This program has been developed to update any table data in the dictionary. We give table name and File name as Input fields.
    <pre>
    REPORT znpmmm0201.
    *Types
    TYPES:
          BEGIN OF ty_file,
            data(4096) TYPE c,
          END OF ty_file.
    *Type-pools
    TYPE-POOLS:
          truxs.
    *Work areas
    DATA:
          wa_file      TYPE ty_file.
    *Internal tables
    DATA:
          it_file      TYPE STANDARD TABLE OF ty_file,
          it_data      TYPE truxs_t_text_data.
    DATA:
          gv_dref TYPE REF TO data,
          file_name TYPE string.
    *FIELD-SYMBOLS
    FIELD-SYMBOLS:
                   <gf_itab> TYPE STANDARD TABLE,
                   <wa>      TYPE ANY.
    *& Selection-screen
    PARAMETERS:
          p_table TYPE rsrd1-tbma_val,
          p_file  TYPE ibipparms-path.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
      PERFORM f4_for_p_file CHANGING file_name .
    *& START-OF-SELECTION
    START-OF-SELECTION.
      CREATE DATA gv_dref TYPE TABLE OF (p_table).
      ASSIGN gv_dref->* TO <gf_itab>.
      PERFORM upload_data USING file_name.
      MODIFY (p_table) FROM TABLE <gf_itab>.
    *&      Form  UPLOAD_DATA
    FORM upload_data USING file.
      CALL FUNCTION 'GUI_UPLOAD'
        EXPORTING
          filename                = file
          filetype                = 'ASC'
        TABLES
          data_tab                = it_file.
      APPEND LINES OF it_file TO it_data.
      CLASS cl_abap_char_utilities DEFINITION LOAD.
      DATA: l_field_seperator.
      l_field_seperator = cl_abap_char_utilities=>horizontal_tab.
      REPLACE ALL OCCURRENCES OF '|' IN TABLE it_data WITH l_field_seperator.
      CALL FUNCTION 'TEXT_CONVERT_TEX_TO_SAP'
        EXPORTING
          i_field_seperator    = l_field_seperator
          i_tab_raw_data       = it_data
        TABLES
          i_tab_converted_data = <gf_itab>.
    ENDFORM.                    " UPLOAD_DATA
    *&      Form  F4_FOR_p_file
    FORM f4_for_p_file CHANGING file.
      DATA:
            l_field_name LIKE  dynpread-fieldname VALUE 'P_FILE'.
      CALL FUNCTION 'F4_FILENAME'
        EXPORTING
          program_name  = syst-cprog
          dynpro_number = syst-dynnr
          field_name    = l_field_name
        IMPORTING
          file_name     = p_file.
      file = p_file.
    ENDFORM.                    " F4_FOR_p_file </pre>
    Thanks,
    Venkat.O</font>

  • Issue with dynamic table which has RichCommandLink and RichSparkChart

    I’m running into an issue when I create a dynamic table with columns of type RichCommandLink and RichSparkChart.
    If my table has both of these types of columns, then the RichCommandLink column behaves like a NOP, meaning clicking on it does not cause the link to take effect and does not navigate to the designated page.
    If I remove the RichSparkChart column, then the RichCommandLink column behaves properly.
    Is there something I’m supposed to be aware of when creating these types of columns? Is there a known problem with RichSparkChart column, like some exception thrown which halts proper rendering of the rest of the columns?
    Thanks,
    Ania.

    Turned out that the problem was with ids which I was dynamically assigning. There was an overlap meaning two columns/elements got the same id. Not the manifestation or behavior I would expect as a result, but once I fixed that, having these two columns side by side works well.

  • Dynamic table with drop down lists

    I have a Dynamic table with a header row, Section and footer row.
    Section has the following cells(columns): Cell1 (drop down with locations), button (to remove row), CCode (Color Code RAL), CName (color name).
    I'm starting with 1 row.
    now what I want to do is, when they select in CCode e.g. RAL 1003 (rawValue "1") then in CName the name "signal yellow" (rawValue "1") should appear.
    I'm using javascript
    My first problem is how do I know which value is chosen, because this isn't working:
    if  (this.rawValue == 1)
    xfa.host.messageBox('Today')
    and second how do I set the value in CName
    because this only sets it in the first CName cell:
    xfa.form.DataSheet.TechnicalInformation.Markings.THatchPatterns.Section.CName.rawValue = '1';
    Please help me, I'm totally lost

    solved the problem, instead on change event put script on exit event.
    and the following line does the trick:
    xfa.resolveNode("THatchPatterns.Section[" + this.parent.index + "]").CCode.rawValue = this.rawValue

  • How to create an internal table with header line in smartforms

    Hello Guys,
    I need to append the data in my internal table in smartforms by the problem is an error occurred "a table without header line  and therefore no component called tdline"
    i already declared the data under types declaration tab
    types : begin of ts_tline,
             TDFORMAT type tdformat,
             tdline type tdline,
            end of ts_tline.
    types : it_tline type table of ts_tline.
    and declare these in global data
    WA_TLINE type TS_TLINE
    XT_TLINE type IT_TLINE
    my syntax in program lines :
      LOOP AT  gy_lines INTO WA_PROJ.
        SPLIT wa_proj AT  cl_abap_char_utilities=>cr_lf
           INTO table IT_SPLIT.
        LOOP AT IT_SPLIT.
          MOVE it_split-commentext TO xt_TLINE-tdline.
    an error occured at this part ****
         append xt_TLINE.
        ENDLOOP.
      ENDLOOP.
    what is wrong with my code..it cannot append data to xt_tline.
    Please help.Will reward points
    Thanks in advance
    aVaDuDz

    check this link
    this will help u......
    http://www.****************/Tutorials/Smartforms/SFMain.htm
    reward IF..........
    regards
    Anbu

  • Passing an internal table WITH HEADER LINE to abap object

    Hi. In another thread, it was explained how to pass an internal table to an abap object method. Is it possible to pass an internal table that has a header line, and RETAIN the header line once the table has been passed?
    My problem is, that I can pass the table, update it, but the read buffer is not populated when returning from the object's method. This is the result of being able to pass a STANDARD TABLE type, but not a STANDARD TABLE WITH HEADER LINE.
    This means that I have to read the table into a work area instead of doing a READ TABLE LKNA1 within the method, which is what I need to do.
    Thanks.

    Please check this sample program, notice that it is modifing the internal table and passing it back modified as well as passing the "work area" or "header line" back thru the exporting parameter.
    report zrich_0001.
    *       CLASS lcl_app DEFINITION
    class lcl_app definition.
      public section.
        types: t_t001 type table of t001.
        class-data: it001 type table of t001.
        class-data: xt001 like line of it001.
        class-methods: change_table
                                    exporting ex_wt001 type t001
                                    changing im_t001 type t_t001.
    endclass.
    data: w_t001 type t001.
    data: a_t001 type table of t001 with header line.
    start-of-selection.
      select * into table a_t001 from t001.
      call method lcl_app=>change_table
                 importing
                     ex_wt001 = w_t001
                 changing
                     im_t001  = a_t001[] .
      check sy-subrc  = 0.
    *       CLASS lcl_app IMPLEMENTATION
    class lcl_app implementation.
      method change_table.
        loop at im_t001 into xt001.
          concatenate xt001-butxt 'Changed'
               into xt001-butxt separated by space.
          modify im_t001 from xt001.
        endloop.
        ex_wt001 = xt001.
      endmethod.
    endclass.
    Regards,
    Rich Heilman

  • Dynamic table with dynamic drop-down list values

    Hi,
    I need to display a dynamic table with 2 columns on an interactive form.
    My Context is defined as below:
    Root
    StudentData     0..n
    StudentName
    StudentCourses     0..n
    Text
    Value
    The 1st column should display student name, 2nd column should display student courses. The courses will be different for each student. I populated the context properly. I checked it by printing them. My DDL is bound to "Student Courses".
    When there is one row -> The DDL is populated with the courses of student 1 (as there is only one).
    When there are more rows -> The DDLs for all the students are populated with all the courses of all the students.
    I want to see the data populated like:
    TEXTFIELD    DROP-DOWN LIST
    Student 1------Student1-Course1
    Student1-Course2
    Student1-Course3
    Student 2------Student2-Course1
    Student2-Course2
    Student2-Course3
    I tried to do this in plain web dynpro using SVS.. it is also working similarly.
    I have set the singleton property of nodes "StudentData" and "StudentCourses" to false.
    Could any one tell me where I am going wrong?
    Thanks
    Ram

    Ram,
    I'm not sure how much this will help, but I know I had the same problem as you when I tried to get a similar thing working, but I can't remember which of the many changes I made fixed the problem, so I'll just show you my code and perhaps you can see if anything is different than yours.
    Here's where I'm creating my dropdown - in my case EastNew_RegOut is the same as your StudentData, and RateTypeDropValues is the same as your StudentCourses (the comments in the code are not meant to sound bossy to you, this is actually an example piece of code that other developers in my company "steal", so I have to put very specific instructions in there!):
    int nodeSize = wdContext.nodeEastNew_RegOut().size();
    for (int i = 0; i < nodeSize; i++) {
         //create an element called "table", that's the element at i.  So, basically it's a row.  Maybe I should have
         //called it "row" instead of table.
         IPublicDeviceExchange.IEastNew_RegOutElement table = (IPublicDeviceExchange.IEastNew_RegOutElement)wdContext.nodeEastNew_RegOut().getElementAt(i);
         //this line of code just executes an rfc that finds out what rates need to be in the dropdown for this particular row
         executeRateTypeDropdown(rateCategory, table.getNum(), wdContext.currentEastNew_MeterOutElement().getReggrp());
         //clear out what's already in there before we re-populate it.
         table.nodeRateTypeDropValues().invalidate();
         //now, I'm looping through all the values in the *actual* rate type dropdown (the one that's an RFC, populated by the above "execute" method)
         for (int j = 0; j < wdContext.nodeEastRatetype_DropdownOut().size(); j++) {
              //for each element in the *actual* Rate type dropdown, I'm going to create an element in my node that I created
              //and set the values from the *actual* one as the values in my node.
                        IPublicDeviceExchange.IRateTypeDropValuesElement element = wdContext.createRateTypeDropValuesElement();
              IPublicDeviceExchange.IEastRatetype_DropdownOutElement rateTypeOut = (IPublicDeviceExchange.IEastRatetype_DropdownOutElement)wdContext.nodeEastRatetype_DropdownOut().getElementAt(j);
              element.setText(rateTypeOut.getText());
              element.setValue(rateTypeOut.getRatetype());
              //here's another key - notice how I don't say wdContext.nodeRateTypeDropValues() - it's the one that's
              //directly off that table I created earlier - the thing that's essentially a row in my newReg table.
              //So, what I'm doing here is adding that new element I created to the dropdown FOR THAT ROW!               
              //(btw, if you're trying to duplicate this, and this method does not exist for your "table" object, it's
              //probably because you didn't listen to me above and you didn't create your node with the singleton property
              //set to false.)
              table.nodeRateTypeDropValues().addElement(element);
    As for my layout... my table is bound to the EastNew_RegOut node, and the column with the dropdown is bound to RateTypeDropValues.Value  (that's probably obvious, but there you have it anyway)
    Finally, in my context, EastNew_RegOut is singleton = true (I was surprised about this, actually, I would have assumed it was false) with a selection of 0..1 and RateTypeDropValues has singleton set to false with a selection of 0..1
    I hope that helps to some degree!
    Jennifer

  • Getting error of Defining an internal table with header line, SELECT-OPTIO

    Hi all,
    i have a coding for my smart form,In this coding i have define an structure which being used,but when i execute it it give me
    error of Defining an internal table with header line, SELECT-OPTIONS, and RANGES is not allowed within a structure.Even tough you can see that in  my coding im not using SELECT-OPTION or RANGES,but can't understand why it gives me this error.
    Following are the code:
      DATA: BEGIN OF traptab OCCURS 50.
            INCLUDE STRUCTURE mseg.
      DATA: vgart LIKE mkpf-vgart,
            blart LIKE mkpf-blart,
            blaum LIKE mkpf-blaum,
            bldat LIKE mkpf-bldat,
            budat LIKE mkpf-budat,
            cpudt LIKE mkpf-cpudt,
            cputm LIKE mkpf-cputm,
            aedat LIKE mkpf-aedat,
            usnam LIKE mkpf-usnam,
            tcode LIKE mkpf-tcode,
            xblnr LIKE mkpf-xblnr,
            bktxt LIKE mkpf-bktxt,
            frath LIKE mkpf-frath,
            frbnr LIKE mkpf-frbnr,
            wever LIKE mkpf-wever,
          END OF traptab. 
    Thanks & Regards,
    sappk25

    thanks

  • Dynamic Table with XML Schema

    Hi, I am new to livecycle and wondering if there is any sample for setting up the dynamic table with XML schema so I can access the data through workbench's xpath. thanks.

    Ivor,
    Take a look at the samples shipped with Designer. For 8.2.1 release take a look at
    C:\Program Files\Adobe\LiveCycle Designer ES\8.2\EN\Samples\Forms\Purchase Order\Schema\Schema\Purchase Order.xsd
    and the form samples.
    Otherwise, forward a request to [email protected] I would be happy to send you a sample XDP with a dynamic table and a schema.
    Steve

  • Dynamic Table with repeating Subform

    Hello,
    I am maiking a form which has a Dynamic Table with a repeating Subform.  The repeating subform has a dropdown list field which has three options for the user to pic.  "LABOR", "EQUIPT.", & "MATL."
    The way I want the form to work is the user will choose which item they want to add to the form with the dropdown list.  Whatever amount they put into the "Amount" column will go to the corresponding total "LABORTotal", "EQUIPTTotal", & "MATLTotal"
    The repeating Subform is basically the Row1, but I have the table split up into subforms because of issues I had eariler with the form.  The repeating subform title is "detail". 
    I cannot get the sums for the 3 items to go into the corresponding totals field.  This is the script that I have for the labor total field:
    form1.total.LABORTotal::calculate - (JavaScript, client)
    var nAmount = xfa.resolveNodes("detail[*].Table1.Row1.AMOUNT");
    var nItem = xfa.resolveNodes("detail[*].Table1.Row1.ITEM");
    var nSum = 0;
    for (var i=0; i<nAmount.length; i++)
        if (nItem.item[i].rawValue == "LABOR")
        nSum = nSum + nAmount.item(i).rawValue;
    This.rawValue = nSum;
    I am not familiar with loop scripting or var scripting so I know I am getting it wrong somewhere. 
    I would greatly appreciate any help!
    Thanks

    Okay,
    Here is your form back to you: https://acrobat.com/#d=IA67zcTBrWlnpcYS234*XQ.
    The issue wasn't the script. If you select the dropdown and go to the Object > Binding palette, you will see you had ticked "Specify values" and these were set to 1, 2 and 3.
    This meant that if the user selected LABOR, the value of the dropdown was "1" and NOT "LABOR". This was throwing the if statement.
    I deselected the specify values and it worked as expected.
    Hope that helps,
    Niall

  • Dynamic table with radio buttons

    I need to load a dynamic table with radio buttons that allow
    the user to select an item in the table. I need to have it add a
    radio button with a unique identifier for each table item.
    For example: the table will load all of the seminars
    locations available in a certain state, the radio button will allow
    the user to select the city in which they would like to attend and
    that value will get passed to the registration page. The value of
    each radio button would be equal to the location_id in the database
    for each of the locations in the table (The table includes the
    date, day, venue, address, hotel info, etc. details for each city.)
    When I add dynamic radio buttons and set the value to the
    location_id in the database, it allows the user to select multiple
    radio buttons. I cannot find any information on how to
    resolve.....??
    Any help is appreciated.

    beanieboo wrote:
    > I need to load a dynamic table with radio buttons that
    allow the user to select
    > an item in the table. I need to have it add a radio
    button with a unique
    > identifier for each table item.
    >
    > For example: the table will load all of the seminars
    locations available in a
    > certain state, the radio button will allow the user to
    select the city in which
    > they would like to attend and that value will get passed
    to the registration
    > page. The value of each radio button would be equal to
    the location_id in the
    > database for each of the locations in the table (The
    table includes the date,
    > day, venue, address, hotel info, etc. details for each
    city.)
    >
    > When I add dynamic radio buttons and set the value to
    the location_id in the
    > database, it allows the user to select multiple radio
    buttons. I cannot find
    > any information on how to resolve.....??
    > Any help is appreciated.
    Give each radio button the same name
    <input type="radio" name=theLocation" value="<?php
    $recordset['location_id'] ?>">
    Mick

Maybe you are looking for