Dynamic TaskFlow Gets Refreshed on Catching a Contextual Event
Hi,
I am using Contextual events in my application. I have 2 task flows in my parent page. One TF is raising an event and the other is catching it. As my catching TF is a dynamic TF, I have specified the event map in it only.
Everything is working as intended only that my dynamic TF gets refreshed when it catches the event! I do not want that. I want to explicitly refresh any UI component that requires to be refreshed, not the whole TF.
So is there any specific property of task flows that make it to refresh itself when ever it catches any contextual event?
Also I have tried 'Refresh="ifNeeded"' and 'RefreshCondition="#{false}"' in my dynamic taskflow specification in the parent page but it does not make any difference.
Regards,
Rahul Saxena
Rahul,
there is no setting for this. If however the managed bean you setup for handling the dynamic region is in backing bean scope (or request scope) then chances are that the region is refreshed because the bean restes after the request (just assuming here). Yournot giving us much to chew on (no JDeveloper version, no implementation details etc. ) So its hard to provide further ideas. As a last resort, if you have a support contract, you can contact customer support with a test case
Frank
Similar Messages
-
Contextual Event refresh/redraw issue between 2 regions (taskflow w/ jsffs)
Working on JDev 11.1.1.2.0
I have one jspx
which contains 2 regions - bounded taskflow with jsffs
Now, I want to communicate between region1 and region2
so, producer is : region2pageDef and consumer is: region1pageDef, and Handler is pointing to a Java Bean Data Control , listening for ActionEvent
Contextual events works fine as expected , but when region1 listenes the contextual event , at that time entire jsff gets refreshed / redrawn, why?
How contextual event works from the ADF side ,and what causes it to redraw the page fragment
ThanksWhen I have 3 dynamic regions on a jspx page, where every region loads taskFlow with jsff page.
One of the pages produces the contextual event, the other receives the contextual event and the 3rd one does nothing.
Then 3rd region is not refreshed. It works correctly.
But when I place eventMap in the pageDef of the jspx page, then all regions are refreshed no matter if they receive the contextual event.
This is not the right way. Why is that? Do you have an idea?
I am using JDev 11.1.1.3.0
Edited by: Nikolay Minchev on Dec 22, 2010 2:44 AM -
Panel is not getting refreshed.i see a jam of old and new graph and lines
hi friends
i am attaching my code .when i adjust the slider position the size of the graph will increase(scaling).when i scroll to see the entire graph the screen is not getting refreshed properly.
no leads ..can be 3,12 ...try any arbitary ...(stored in a txt file)
myfile.txt=consider some 600 random numbers for testing.
public class ECGDisplay extends JFrame implements WindowListener
Container contain;
JSlider sliderX,sliderY,sliderCount;
JTextField Xval,Yval,Count;
int [] time=new int[600];
int []Volt=new int[600];
Simpanel[] panelname;
float relX=1;
float relY=1;
LineBorder lineborder,lineborder1;
JPanel ScalingAdjustersPanel,ECGDisplayPanel;
JScrollPane Scroll;
JViewport vp;
JRadioButton RbX,RbY,RbCount;
ButtonGroup group;
private FileInputStream in;
String horizontalScalingSliderLabel = "mm/S";
String verticalScalingSliderLabel = "mm/mV";
String heightOfTileSliderLabel ="Height of tile in uV";
boolean flag=false;
int LeadCount;
int x=20,y=15;
int count=4;
JSplitPane splitPane = new JSplitPane(JSplitPane.HORIZONTAL_SPLIT);
java.awt.Dimension screen = java.awt.Toolkit.getDefaultToolkit().getScreenSize();
public ECGDisplay()
super();
this.setTitle("ECG FRAME");
this.addWindowListener(this);
this.setSize (screen.width, screen.height);
contain=getContentPane();
EcgLeadCount();
EcgWindowCreation(LeadCount);
void EcgLeadCount( )
try
FileInputStream in = new FileInputStream("no_Leads.txt");
BufferedReader br = new BufferedReader(new InputStreamReader(in));
LeadCount=Integer.parseInt(br.readLine());
in.close();
catch (Exception e)
System.err.println ("Error while reading no of leads");
void PanelAdjuster()
for(int i=0;i<LeadCount;i++)
panelname.setPreferredSize(new Dimension((30*x),(count*y)));
void readMyFile(int i)
try
FileInputStream in = new FileInputStream("myfile.txt");
BufferedReader br = new BufferedReader(new InputStreamReader(in));
String strLine;
for (int j = 0; j < Volt.length; j++)
Volt[j] = Integer.parseInt(br.readLine());
in.close();
catch (Exception e)
System.err.println ("Error writing to file");
public void EcgWindowCreation(int LeadCount)
for(int i=0;i<600;i++)
time[i]=i;
ScalingAdjustersPanel=new JPanel();
ECGDisplayPanel=new JPanel();
panelname=new Simpanel[LeadCount];
for(int i=0;i<LeadCount;i++)
panelname[i] =new Simpanel();
System.out.println(panelname[i]);
readMyFile(i);
ECGDisplayPanel.add(panelname[i]);
ScalingAdjustersPanel.setPreferredSize(new Dimension(200,(screen.height-50)));
ScalingAdjustersPanel.setLayout(new BoxLayout(ScalingAdjustersPanel,BoxLayout.Y_AXIS));
ECGDisplayPanel.setLayout(new BoxLayout(ECGDisplayPanel,BoxLayout.Y_AXIS));
sliderX=new JSlider(10,50,20);
sliderY=new JSlider(15,50,15);
sliderCount=new JSlider(4,10,4);
ScalingAdjustersPanel.add(sliderCount);
sliderCount.setBorder(BorderFactory.createTitledBorder("uV"));
sliderCount.setMajorTickSpacing(2);
sliderCount.setMinorTickSpacing(1);
sliderCount.setPaintTicks(true);
sliderCount.setPaintLabels(true);
sliderCount.setVisible(false);
sliderCount.addChangeListener(new SliderChange());
ScalingAdjustersPanel.add(sliderX);
sliderX.setBorder(BorderFactory.createTitledBorder(horizontalScalingSliderLabel));
sliderX.setMajorTickSpacing(10);
sliderX.setMinorTickSpacing(5);
sliderX.setPaintTicks(true);
sliderX.setPaintLabels(true);
sliderX.addChangeListener(new SliderChange());
sliderX.setVisible(true);
ScalingAdjustersPanel.add(sliderY);
sliderY.setBorder(BorderFactory.createTitledBorder(verticalScalingSliderLabel));
sliderY.setMajorTickSpacing(10);
sliderY.setMinorTickSpacing(5);
sliderY.setPaintTicks(true);
sliderY.setPaintLabels(true);
sliderY.addChangeListener(new SliderChange());
sliderY.setVisible(false);
RbX=new JRadioButton ("horizontal Scaling",true);
RbY=new JRadioButton ("vertical Scaling");
RbCount=new JRadioButton ("height Of Tile");
group=new ButtonGroup ();
group.add(RbX);
group.add(RbY);
group.add(RbCount);
ScalingAdjustersPanel.add(RbX);
ScalingAdjustersPanel.add(RbY);
ScalingAdjustersPanel.add(RbCount);
RbX.addActionListener(new buttonSelected());
RbY.addActionListener(new buttonSelected());
RbCount.addActionListener(new buttonSelected());
lineborder = new LineBorder(Color.GRAY,2,true);
lineborder1 = new LineBorder(Color.RED,2,true);
ScalingAdjustersPanel.setBorder(lineborder);
JScrollPane Scroll=new JScrollPane(ECGDisplayPanel);
contain.setLayout(new BorderLayout());
splitPane.setOneTouchExpandable(true);
splitPane.add(ScalingAdjustersPanel);
splitPane.add(Scroll);
contain.add(splitPane,BorderLayout.CENTER);
setVisible(true);
public void windowClosing(WindowEvent evt)
this.setVisible(false);
this.dispose();
public void windowOpened(WindowEvent evt) {}
public void windowClosed(WindowEvent evt) {}
public void windowIconified(WindowEvent evt) {}
public void windowDeiconified(WindowEvent evt) {}
public void windowActivated(WindowEvent evt) {}
public void windowDeactivated(WindowEvent evt) {}
public class SliderChange implements ChangeListener
public void stateChanged(ChangeEvent AE)
Object sliderOBJ=AE.getSource();
if(sliderOBJ==sliderX)
x= sliderX.getValue();
relX=(float)x/20;
else if (sliderOBJ==sliderY)
y= sliderY.getValue();
relY=(float)(((float)y*count)/(15*4));
else if(sliderOBJ==sliderCount)
count=sliderCount.getValue();
relY=(float)(((float)y*count)/(15*4));
PanelAdjuster();
ECGDisplayPanel.repaint();
ECGDisplayPanel.updateUI();
public class buttonSelected implements ActionListener
public void actionPerformed(ActionEvent e)
JRadioButton slid1=(JRadioButton)e.getSource();
if(slid1==RbX)
sliderX.setVisible(true);
sliderY.setVisible(false);
sliderCount.setVisible(false);
if(slid1==RbY)
sliderX.setVisible(false);
sliderY.setVisible(true);
sliderCount.setVisible(false);
if(slid1==RbCount)
sliderX.setVisible(false);
sliderY.setVisible(false);
sliderCount.setVisible(true);
public class Simpanel extends JPanel
public void paintComponent(Graphics g)
g.setColor(Color.BLUE);
for(int i=0;i<599;i++)
g.drawLine((int)(time[i]*relX),(int)(Volt[i]*relY),(int)(time[i+1]*relX),(int)(Volt[i+1]*relY));
Graphics2D g2=(Graphics2D) g;
//drawing a rectangle
double leftX=0;
double topY=0;
double width=x;
double height=y;
g2.setColor(Color.RED);
for(int j=0;j<=count;j++)
for(int i=0;i<30;i++)
Rectangle2D rect=new Rectangle2D.Double(leftX,topY,width,height);
g2.draw(rect);
leftX=leftX+x;
leftX=0;
topY=topY+y;
public static void main(String args[])
ECGDisplay frame=new ECGDisplay();
Edited by: garlapati on Apr 7, 2009 10:18 AMFrom the [custom painting tutotial|http://java.sun.com/docs/books/tutorial/uiswing/painting/index.html]:
Most of the standard Swing components have their look and feel implemented by separate "UI Delegate" objects. The invocation of super.paintComponent(g) passes the graphics context off to the component's UI delegate, which paints the panel's background. For a closer look at this process, see the section entitled "Painting and the UI Delegate" in the aforementioned SDN article. -
BPM composer getting refreshed automatically at regular intervals
Hi,
We have installed SOA Suite 11.1.1.6. While working on BPM composer, the window gets refreshed automatically after regular intervals and the entire work gets lost.
Any help is highly appreciated.
Thanks,
Deepak> and the tcode for the lock is KRNL. and we dont have any other information regarding this.
You mention that this is the account of an employee, so I assume a Dialog type user ID.
Sounds to me like a script somewhere with this user ID in it for the connection to the system. Could be anywhere... theoretically also on a PC.
Contact the user and ask them whether they saved their pwd anywhere.
Also activate the SM20 dynamic filters to find the terminal for all types of events (also not critical) before the next pwd lock of the user (128).
If you find that the terminal is an application server of your own system, then you will need to check your jobs again in more detail and in extreme cases even transport imports.
Cheers,
Julius -
Contextual Event Automatically refreshing child regions
Hello,
Here's my dilemma. We have an ADF page fragment that contains three regions(which point to 3 different bounded task flows). Lets call the bounded taskflows btf1, btf2, and btf3.
What currently happens is we use contextual events to create communication between (btf1 and btf2) and communication between (btf2 and btf3)? We do not have contextual event that would allow communication between btf1 and btf3.
So we currently have this communication working. Hence, when I hit a button in btf1, it fires off a contextual event, such that btf2 is refreshed. But what is happening here, is that btf3 is also being refreshed. We DON'T want THIS... We only want btf3 to be refreshed from an event that is fired from btf2.
Question. Is there a way to restrict ADF from refreshing btf3 everytime and event is fired from btf1.
In general, it seems as though all regions are being refreshed everytime a contextual event is fired. We don't want this. How can disable this from happening? We have checked all of wiring. There is no connection between btf1 and btf3.Try creating the event mapping - please see "28.7.2 How to Create Contextual Events Manually" in Dev Guide http://download.oracle.com/docs/cd/E15523_01/web.1111/b31974/web_adv.htm#CACJBFGI
-
Selection Screen getting refreshed after execution..
Hello All,
I have a strange problem..
My selection-screen values are getting refreshed after execution and come back to selection screen. I am using normal ALV Fm to display the values. Can some suggest a possible reason?
Many thanks,
V NairNo .. I have checked it..Selection variables are not getting refreshed.
My Code Below
REPORT yhr_icm_exception_report.
Type Pool declarations
TYPE-POOLS: slis, "For AlV
sdydo, "Dynamic Documents
icon. "For ICON
Table declarations
TABLES : yhr_icm_exp_log, "ICM Exceptions Log
yhr_icm_exp_hist. "ICM Exception History
Include Constants
INCLUDE yhr_icm_constants . "Program to hold constants
Types declarations
*-To hold return field
TYPES: BEGIN OF ty_returntab.
INCLUDE STRUCTURE ddshretval. "Interface Structure
TYPES: END OF ty_returntab.
*-To hold deletion records
TYPES : BEGIN OF ty_icm_del,
tab_name TYPE yhr_tabname, "Internal table name
objid TYPE hrobjid, "Object ID
begda TYPE begda, "Begin Date
otype TYPE otype, "Object Type
END OF ty_icm_del.
*-Message details to be displayed
TYPES : BEGIN OF ty_message,
msgnr TYPE msgno, "System message number
text TYPE yhr_icm_exp_log-msgxx, "Message Text
END OF ty_message.
*-To hold exception log
TYPES : BEGIN OF ty_icm_exp_log,
msgno TYPE msgnr, "Message number
run_id TYPE yhr_icm_erun_id, "Exception Run ID
delta_id TYPE yhr_icm_run_id, "Run ID
record_type TYPE yhr_icm_exp_type, "Record Type
otype TYPE yhr_otype, "Object Type
objid TYPE hrobjid, "Object ID
begda TYPE begda, "Begin Date
msgxx TYPE msgxx, "Message
status TYPE yhr_icm_icon, "Status
delta_relevance TYPE yhr_delta_rel, "Delta Relevance
END OF ty_icm_exp_log.
*-To hold email attachment
TYPES: BEGIN OF ty_attach,
text(500) TYPE c, "Text
END OF ty_attach.
*To hold object type & text
TYPES :BEGIN OF ty_objid_text,
objid TYPE objid, "Object ID
text TYPE emnam, "Object Text
END OF ty_objid_text.
*-To hold counter values - Exp , Del & historical
TYPES :BEGIN OF ty_count,
exp(10) TYPE c, "Exceptions
del(10) TYPE c, "Deletions
hist(10) TYPE c, "Historical Deletions
END OF ty_count.
*- To hold lock details
TYPES : BEGIN OF ty_lock,
live TYPE c, "Live Callidus Program
genr TYPE c, "Generation Program
exp TYPE c, "Exception Program
END OF ty_lock.
Range Declarations
RANGES :
gr_objid FOR hrp1001-objid, "Range for Object ID
gr_pernr FOR pa0000-pernr. "Range for Employee number
Internal Table Declarations
DATA : gt_records TYPE STANDARD TABLE OF yhr_icm_exp_report,
gt_objid_text TYPE STANDARD TABLE OF ty_objid_text,
gt_icm_exp_log TYPE STANDARD TABLE OF ty_icm_exp_log,
gt_returntab TYPE STANDARD TABLE OF ty_returntab,
gt_t777o TYPE STANDARD TABLE OF t777o,
gt_diff_tab TYPE STANDARD TABLE OF yhr_icm_diff,
gt_del_tab TYPE STANDARD TABLE OF ty_icm_del, "#EC *
gt_iattach TYPE STANDARD TABLE OF ty_attach,
gt_message TYPE STANDARD TABLE OF ty_message,
gt_fieldcat TYPE slis_t_fieldcat_alv,
gt_heading TYPE slis_t_listheader,
gt_exceptions TYPE yhr_icm_exp_list_t,
gt_events TYPE slis_t_event.
Structure Declarations
DATA : gs_objid_text TYPE ty_objid_text,
gs_icm_exp_log TYPE ty_icm_exp_log,
gs_records TYPE yhr_icm_exp_report,
gs_exceptions TYPE yhr_icm_exp_list,
gs_count TYPE ty_count,
gs_fieldcat TYPE slis_fieldcat_alv, "#EC *
gs_returntab TYPE ty_returntab,
gs_icm_exp_hist TYPE yhr_icm_exp_hist,
gs_iattach TYPE ty_attach,
gs_message TYPE ty_message, "#EC *
gs_layout TYPE slis_layout_alv,
gs_t777o TYPE t777o,
gs_lock TYPE ty_lock.
Constant declarations
CONSTANTS:
c_yes TYPE string VALUE 'YES',
c_no TYPE string VALUE 'NO',
c_true TYPE c VALUE 'X',
c_deletions TYPE c VALUE 'D',
c_delta_no TYPE c VALUE 'N',
c_delta_yes TYPE c VALUE 'Y',
c_historical TYPE c VALUE 'H',
c_a TYPE c VALUE 'A',
c_error TYPE c VALUE 'E',
c_equal(2) TYPE c VALUE 'EQ',
c_participants TYPE c VALUE 'P',
c_include TYPE c VALUE 'I',
c_position TYPE c VALUE 'S',
c_organization TYPE c VALUE 'O',
c_runlock TYPE string VALUE 'RUN_LOCK',
c_parameter TYPE string VALUE 'P',
c_selfield TYPE string VALUE 'SEL_FIELD' ,
c_type TYPE string VALUE 'TYPE',
c_topofpage TYPE string VALUE 'TOP_OF_PAGE',
c_rectype TYPE string VALUE ' S_RECTYPE',
c_objectkey TYPE string VALUE 'OBJECTKEY1',
c_icon_green TYPE string VALUE '@08@',
c_icon_red TYPE string VALUE '@0A@',
c_icon_amber TYPE string VALUE '@09@',
c_green TYPE string VALUE 'GREEN',
c_amber TYPE string VALUE 'AMBER',
c_red TYPE string VALUE 'RED',
c_tabname TYPE slis_tabname VALUE 'GT_RECORDS',
c_structname TYPE dd02l-tabname VALUE 'YHR_ICM_EXP_REPORT' ,
c_siwb_wallpaper TYPE sdydo_key VALUE 'SIWB_WALLPAPER',
c_user_command TYPE slis_formname VALUE 'F01_ALV_EVENT_USER_COMMAND',
c_genname TYPE trdir-name VALUE 'YHR_ICM_GENERATE_EXCEPTIONS',
c_expname TYPE trdir-name VALUE 'YHR_ICM_EXCEPTION_REPORT',
c_pf_status TYPE slis_formname VALUE 'SET_PF_STATUS',
c_msg_class TYPE string VALUE 'YHR_ICM'.
Global Variable Declarations
DATA: gv_email_error TYPE c,
gv_email_sent TYPE c,
gv_exit TYPE c.
Selection Screen - Block I
SELECTION-SCREEN: BEGIN OF BLOCK b3 WITH FRAME TITLE text-s07.
SELECT-OPTIONS:
*- Run ID
s_run_id FOR yhr_icm_exp_hist-run_id,
*- Exception Type
s_rectyp FOR yhr_icm_exp_log-record_type NO INTERVALS,
*- Object Type
s_otype FOR yhr_icm_exp_log-otype NO INTERVALS,
*- Object ID
s_objid FOR yhr_icm_exp_log-objid NO INTERVALS,
*- Start Date
s_begda FOR yhr_icm_exp_log-begda,
*- Message number
s_msgno FOR yhr_icm_exp_log-msgno,
*- Message Text
s_msgxx FOR yhr_icm_exp_log-msgxx.
SELECT-OPTIONS:
*- Delta Relevance
s_relv FOR yhr_icm_exp_log-delta_relevance NO INTERVALS.
PARAMETERS:
*- Long Text
p_ltext AS CHECKBOX DEFAULT ' '.
SELECTION-SCREEN: END OF BLOCK b3.
Selection Screen - Block II
SELECTION-SCREEN: BEGIN OF BLOCK b2 WITH FRAME TITLE text-s08.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(14) text-033.
*-Sucess
PARAMETERS:
p_stat_s AS CHECKBOX. "D11K917251
SELECTION-SCREEN COMMENT 24(14) text-034.
*-Warning
PARAMETERS:
p_stat_w AS CHECKBOX. "D11K917251
SELECTION-SCREEN COMMENT 48(15) text-035.
PARAMETERS:
*-Error
p_stat_e AS CHECKBOX . "D11K917251
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN: END OF BLOCK b2.
Selection Screen - Block III
SELECTION-SCREEN: BEGIN OF BLOCK b4 WITH FRAME TITLE text-s09.
*-Email Details
PARAMETERS:
p_email(128) TYPE c.
SELECTION-SCREEN: END OF BLOCK b4.
Selection Screen on value request.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_msgno-low.
PERFORM f4_message.
Selection Screen Output.
AT SELECTION-SCREEN OUTPUT.
CHECK gt_returntab[] IS NOT INITIAL.
REFRESH s_msgno.
s_msgno-option = c_equal.
s_msgno-sign = c_include.
LOOP AT gt_returntab INTO gs_returntab.
s_msgno-low = gs_returntab-fieldval.
s_msgno-high = space.
APPEND s_msgno.
ENDLOOP.
At Selection Screen for Validation
AT SELECTION-SCREEN.
CLEAR gv_email_error.
*-Validate Object Type
PERFORM validate_objecttype.
*-Validate Exception ID
PERFORM fetch_exp_header.
*-Validate Exception Type
PERFORM validate_exptype.
*-Validate Message Number
PERFORM validate_msgno.
*-Validate Message Type
PERFORM validate_msgtype.
*-Validate Delta
PERFORM validate_delta.
*-Validate Email ID
PERFORM validate_email USING p_email
CHANGING gv_email_error.
IF gv_email_error IS NOT INITIAL.
MESSAGE e000(yhr_icm) WITH text-027.
ENDIF.
Initialization
INITIALIZATION.
Initialization
PERFORM initialization.
Start Of Selection
START-OF-SELECTION.
CLEAR : gv_email_error,
gv_email_sent,
gv_exit,
gs_lock.
Try locking the main program
PERFORM lock_generation_program.
CHECK gs_lock IS INITIAL.
*-Fetch the messages stored in table
PERFORM fetch_item_records.
Read object type text.
PERFORM read_text.
Get Object Text
PERFORM get_object_text.
*-Fetch the current SAP messages
PERFORM fetch_records.
*-Update Delta Flag
PERFORM update_delta_flag.
*-Compare messages in table & in SAP
PERFORM compare_message.
If receiver is not blank, try sending out mail
PERFORM send_mail USING p_email.
End Of Selection
END-OF-SELECTION.
IF gv_exit IS NOT INITIAL.
EXIT.
ENDIF.
*-Display ALV
PERFORM display_alv.
*-Build the event table for ALV display
PERFORM build_eventtab CHANGING gt_events[].
*-Fill the layout details
PERFORM layout_build .
Release all locks
PERFORM release_locks.
*-Finally call the grid display
PERFORM display_data.
*& Form set_pf_status
text
-->RT_EXTAB text
FORM set_pf_status USING rt_extab TYPE slis_t_extab. "#EC *
Set PF Status
SET PF-STATUS 'STANDARD'.
ENDFORM. "Set_pf_status
*& Form DISPLAY_ALV
text
--> p1 text
<-- p2 text
FORM display_alv .
*- Use FM to create field catalog
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-repid
i_internal_tabname = c_tabname
i_structure_name = c_structname
CHANGING
ct_fieldcat = gt_fieldcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 1
OTHERS = 1.
IF sy-subrc = 1.
MESSAGE i000(yhr_icm) WITH text-001.
EXIT.
ENDIF.
*- Remove SEL Field Column as it is not required
DELETE gt_fieldcat WHERE fieldname = c_selfield.
*-If user chooses long text, activate icon
IF p_ltext IS INITIAL.
LOOP AT gt_fieldcat INTO gs_fieldcat WHERE fieldname = c_type.
gs_fieldcat-icon = c_true.
ENDLOOP.
ENDIF.
ENDFORM. " DISPLAY_ALV
*& Form BUILD_EVENTTAB
text
<--P_GT_EVENTS[] text
FORM build_eventtab CHANGING p_events TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
*-Get the list of event for alv
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = p_events.
*-Add top of page event to event list
READ TABLE p_events
WITH KEY name = slis_ev_top_of_page
INTO ls_event.
IF sy-subrc = 0.
MOVE c_topofpage TO ls_event-form.
APPEND ls_event TO p_events.
ENDIF.
ENDFORM. " BUILD_EVENTTAB
*& Form LAYOUT_BUILD
text
--> p1 text
<-- p2 text
FORM layout_build .
gs_layout-zebra = c_true.
gs_layout-colwidth_optimize = c_true.
gs_layout-detail_popup = c_true.
gs_layout-detail_initial_lines = c_true.
gs_layout-detail_titlebar = text-044.
gs_layout-box_fieldname = c_selfield.
ENDFORM. " LAYOUT_BUILD
*& Form DISPLAY_DATA
text
--> p1 text
<-- p2 text
FORM display_data .
*-Display ALV display
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_user_command = c_user_command
i_background_id = c_siwb_wallpaper
i_callback_program = sy-repid
i_callback_pf_status_set = c_pf_status
i_default = c_true
i_save = c_a
is_layout = gs_layout
it_fieldcat = gt_fieldcat
it_events = gt_events
TABLES
t_outtab = gt_records.
ENDFORM. " DISPLAY_DATA
*& Form FETCH_RECORDS
text
--> p1 text
<-- p2 text
FORM fetch_records .
REFRESH : gt_diff_tab,
gt_del_tab,
gr_pernr,
gt_exceptions.
CLEAR: gs_icm_exp_log.
*-Get Employee details
PERFORM get_person_data.
*-Get Position Details
PERFORM get_position_data.
*-Get Organization Details
PERFORM get_org_data.
*-Get Exception current SAP exception list.
PERFORM get_exception_list.
*-Add deletion records
PERFORM filter_deletions.
ENDFORM. " FETCH_RECORDS
*& Form top_of_page
text
FORM top_of_page. "#EC *
PERFORM build_comment USING gt_heading.
*-Display Use FM to display Top Of Page
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = gt_heading[].
CLEAR gt_heading.
ENDFORM. "TOP_OF_PAGE
*& Form build_comment
text
-->P_HEADING text
FORM build_comment USING p_heading TYPE slis_t_listheader.
DATA: ls_hline TYPE slis_listheader,
lv_text(120) TYPE c.
*-Display report title
ls_hline-typ = c_historical.
WRITE text-006 TO lv_text.
ls_hline-info = lv_text.
APPEND ls_hline TO p_heading.
CLEAR ls_hline.
ls_hline-typ = c_s.
*-Remove leading & trailing spaces
CONDENSE : gs_count-del, gs_count-exp, gs_count-hist.
*-If the count is space then pass 0
IF gs_count-del = space.
gs_count-del = 0.
ENDIF.
IF gs_count-exp = space.
gs_count-exp = 0.
ENDIF.
IF gs_count-hist = space.
gs_count-hist = 0.
ENDIF.
IF gs_lock IS INITIAL.
*-Display Deletion, Exception, Historical Count
CONCATENATE text-037 gs_count-del
text-032 gs_count-exp
text-039 gs_count-hist
INTO ls_hline-info SEPARATED BY space.
ELSEIF gs_lock-live IS NOT INITIAL.
ls_hline-info = text-007.
ELSEIF gs_lock-genr IS NOT INITIAL.
ls_hline-info = text-008.
ELSEIF gs_lock-exp IS NOT INITIAL.
ls_hline-info = text-009.
ENDIF.
APPEND ls_hline TO p_heading.
CLEAR ls_hline.
ENDFORM. "BUILD_COMMENT
*& Form INITIALIZATION
text
--> p1 text
<-- p2 text
FORM initialization .
Read Previous run
SELECT MAX( run_id )
INTO s_run_id-low
FROM yhr_icm_exp_hist. "#EC *
s_run_id-option = c_equal.
s_run_id-sign = c_include.
APPEND s_run_id.
s_rectyp-option = c_equal.
s_rectyp-sign = c_include.
s_rectyp-low = c_error.
APPEND s_rectyp.
s_rectyp-low = c_deletions.
APPEND s_rectyp.
PERFORM restrict_selections.
*Get the message from Message Class YHR_ICM
SELECT msgnr
text
FROM t100
INTO TABLE gt_message
WHERE arbgb = c_msg_class AND
msgnr GT '000'. "#EC *
ENDFORM. " INITIALIZATION
*& Form F4_MESSAGE
text
<--P_P_MSGNO text
FORM f4_message.
F4 Help - Display all messages
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'MSGNR'
dynpprog = sy-cprog
dynpnr = sy-dynnr
dynprofield = 'S_MSGNR'
window_title = text-045
value_org = c_s
multiple_choice = c_true
TABLES
value_tab = gt_message
return_tab = gt_returntab
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 1.
IF sy-subrc = 1.
MESSAGE i000(yhr_icm) WITH text-002.
EXIT.
ELSEIF sy-subrc = 2.
MESSAGE i000(yhr_icm) WITH text-003.
EXIT.
ENDIF.
ENDFORM. " F4_MESSAGE
*& Form VALIDATE_OBJECTTYPE
text
--> p1 text
<-- p2 text
FORM validate_objecttype .
CHECK s_otype-low IS NOT INITIAL.
CONDENSE s_otype-low.
Validate object type to check whether user has entered only S, P or O
IF s_otype-low NE c_organization AND
s_otype-low NE c_position AND
s_otype-low NE c_participants .
MESSAGE e000(yhr_icm) WITH 'Enter either S(Position), P(Person) or O(Org Unit)'(021).
ENDIF.
ENDFORM. " VALIDATE_OBJECTTYPE
*& Form VALIDATE_OBJECTTYPE
FORM f01_alv_event_user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield."#EC *
DATA : lv_answer TYPE c,
lt_fields TYPE STANDARD TABLE OF sval,
ls_fields TYPE sval.
*-Get the row user has selected in ALV list
READ TABLE gt_records INTO gs_records INDEX rs_selfield-tabindex.
CASE r_ucomm.
WHEN 'DISP'.
CASE gs_records-otype.
WHEN 'S'.
SET PARAMETER ID 'POT' FIELD gs_records-otype.
SET PARAMETER ID 'PON' FIELD gs_records-objid.
CALL TRANSACTION 'PP01_DISP' AND SKIP FIRST SCREEN.
WHEN 'P'.
SET PARAMETER ID 'PER' FIELD gs_records-objid.
CALL TRANSACTION 'PA20' AND SKIP FIRST SCREEN.
WHEN 'O'.
SET PARAMETER ID 'POT' FIELD gs_records-otype.
SET PARAMETER ID 'PON' FIELD gs_records-objid.
CALL TRANSACTION 'PP01_DISP' AND SKIP FIRST SCREEN.
ENDCASE.
WHEN 'CHNG'.
CASE gs_records-otype.
WHEN 'S'.
SET PARAMETER ID 'POT' FIELD gs_records-otype.
SET PARAMETER ID 'PON' FIELD gs_records-objid.
CALL TRANSACTION 'PP01' AND SKIP FIRST SCREEN.
WHEN 'P'.
SET PARAMETER ID 'PER' FIELD gs_records-objid.
CALL TRANSACTION 'PA30' AND SKIP FIRST SCREEN.
WHEN 'O'.
SET PARAMETER ID 'POT' FIELD gs_records-otype.
SET PARAMETER ID 'PON' FIELD gs_records-objid.
CALL TRANSACTION 'PP01' AND SKIP FIRST SCREEN.
ENDCASE.
WHEN 'EMAIL'.
*- Check whether email has already been sent
IF gv_email_sent = c_true.
*- If yes, then display pop up to confirm for mailing again
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
text_question = text-041
text_button_1 = text-042
text_button_2 = text-043
IMPORTING
answer = lv_answer
EXCEPTIONS
text_not_found = 1
OTHERS = 1.
IF sy-subrc = 1.
MESSAGE i000(yhr_icm) WITH text-004.
EXIT.
ENDIF.
*- Continue only if user has selected Yes
CHECK lv_answer = '1'.
ENDIF.
*- Add Email Field & Table
ls_fields-tabname = 'SZA5_D0700'.
ls_fields-fieldname = 'SMTP_ADDR'.
APPEND ls_fields TO lt_fields.
*- Use FM to get new Email ID
CALL FUNCTION 'POPUP_GET_VALUES'
EXPORTING
popup_title = text-s09
start_column = '5'
start_row = '5'
TABLES
fields = lt_fields
EXCEPTIONS
error_in_fields = 1
OTHERS = 1.
IF sy-subrc = 1.
MESSAGE i000(yhr_icm) WITH text-004.
EXIT.
ENDIF.
*- Get the Email user has entered
READ TABLE lt_fields INTO ls_fields INDEX 1.
*- Validate Email ID
PERFORM validate_email USING ls_fields-value
CHANGING gv_email_error.
*- If the flag is not initial, indicates possible error
IF gv_email_error IS NOT INITIAL.
MESSAGE i000(yhr_icm) WITH text-027.
EXIT.
ELSE.
If no error, then try ending email
PERFORM send_mail USING ls_fields-value.
ENDIF.
WHEN 'REFRESH'.
*- Fetch the current SAP messages
PERFORM fetch_records.
*- Update Delta Flag
PERFORM update_delta_flag.
*- Compare messages in table & in SAP
PERFORM compare_message.
*- Refresh alv which is already displayed
rs_selfield-refresh = c_true.
ENDCASE.
ENDFORM. "F01_ALV_EVENT_USER_COMMAND
*& Form RESTRICT_SELECTIONS
text
--> p1 text
<-- p2 text
FORM restrict_selections .
TYPE-POOLS sscr.
STATICS: lt_restrict TYPE sscr_restrict,
lt_opt_list TYPE sscr_opt_list,
ls_*** TYPE sscr_***.
Restrict the wage type selection so the user can only enter
values with the 'EQ' clause.
CLEAR lt_opt_list.
MOVE c_objectkey TO lt_opt_list.
MOVE c_true TO: lt_opt_list-options-eq,
lt_opt_list-options-bt,
lt_opt_list-options-cp,
lt_opt_list-options-eq,
lt_opt_list-options-ge,
lt_opt_list-options-gt,
lt_opt_list-options-le,
lt_opt_list-options-lt.
APPEND lt_opt_list TO lt_restrict-opt_list_tab.
MOVE: c_s TO ls_***-kind,
c_rectype TO ls_***-name,
c_include TO ls_***-sg_main,
space TO ls_***-sg_addy,
c_objectkey TO ls_***-op_main.
APPEND ls_*** TO lt_restrict-***_tab.
*-Restrict the values OTYPE
MOVE 'S_OTYPE' TO ls_***-name.
APPEND ls_*** TO lt_restrict-***_tab.
*-Restrict the values OBJID
MOVE 'S_OBJID' TO ls_***-name.
APPEND ls_*** TO lt_restrict-***_tab.
*-Use FM to restrict the values
CALL FUNCTION 'SELECT_OPTIONS_RESTRICT'
EXPORTING
restriction = lt_restrict.
ENDFORM. " RESTRICT_SELECTIONS
*& Form GET_PERSON_DATA
text
--> p1 text
<-- p2 text
FORM get_person_data .
DATA : lt_del_tab TYPE STANDARD TABLE OF yhr_icm_diff.
SORT gt_icm_exp_log BY msgno .
gr_pernr-sign = c_include.
gr_pernr-option = c_equal.
LOOP AT gt_icm_exp_log INTO gs_icm_exp_log WHERE otype = c_participants AND
record_type = c_error.
*- Sort the table based on msgno and collect pernr
gr_pernr-sign = c_include.
gr_pernr-option = c_equal.
gr_pernr-low = gs_icm_exp_log-objid.
APPEND gr_pernr.
CLEAR gr_pernr-low.
AT END OF msgno. "#EC *
*- For the list of Pernr having same PERNR get the current exp details
IF gs_icm_exp_log-msgno = c_msg_100.
*- Export the pernr list to memory id & import in the below FM
*- Selection of records should be based on values exported from here
EXPORT gr_pernr TO MEMORY ID 'PERNR_0001'.
Get Org Assignment 0001 Data
CALL FUNCTION 'Y_HR_DIFF_PERNR_0001_DATA'
EXPORTING
period_begda = gs_icm_exp_hist-begda
period_endda = gs_icm_exp_hist-endda
refresh = space
UPDATE = space
TABLES
diff_tab = gt_diff_tab
del_tab = lt_del_tab.
ELSEIF gs_icm_exp_log-msgno = c_msg_101. "Y_HR_DIFF_PERNR_0001_ORG_DATA
ELSEIF gs_icm_exp_log-msgno = c_msg_102 .
EXPORT gr_pernr TO MEMORY ID 'PERNR_0000'.
Get Actions 0000 Data
CALL FUNCTION 'Y_HR_DIFF_PERNR_0000_DATA'
EXPORTING
period_begda = gs_icm_exp_hist-begda
period_endda = gs_icm_exp_hist-endda
refresh = space
UPDATE = space
TABLES
diff_tab = gt_diff_tab
del_tab = lt_del_tab.
ELSEIF gs_icm_exp_log-msgno = c_msg_103.
EXPORT gr_pernr TO MEMORY ID 'PERNR_0002'.
Get Personal Details 0002 Data
CALL FUNCTION 'Y_HR_DIFF_PERNR_0002_DATA'
EXPORTING
period_begda = gs_icm_exp_hist-begda
period_endda = gs_icm_exp_hist-endda
refresh = space
UPDATE = space
TABLES
diff_tab = gt_diff_tab
del_tab = lt_del_tab.
ELSEIF gs_icm_exp_log-msgno = c_msg_104.
EXPORT gr_pernr TO MEMORY ID 'PERNR_0004'.
Get Disability 0004 Data
CALL FUNCTION 'Y_HR_DIFF_PERNR_0004_DATA'
EXPORTING
period_begda = gs_icm_exp_hist-begda
period_endda = gs_icm_exp_hist-endda
refresh = space
UPDATE = space
TABLES
diff_tab = gt_diff_tab
del_tab = lt_del_tab.
ELSEIF gs_icm_exp_log-msgno = c_msg_105.
EXPORT gr_pernr TO MEMORY ID 'PERNR_0006'.
Get Addresses 0006 Data
CALL FUNCTION 'Y_HR_DIFF_PERNR_0006_DATA'
EXPORTING
period_begda = gs_icm_exp_hist-begda
period_endda = gs_icm_exp_hist-endda
refresh = space
UPDATE = space
TABLES
diff_tab = gt_diff_tab
del_tab = lt_del_tab.
ELSEIF gs_icm_exp_log-msgno = c_msg_106.
EXPORT gr_pernr TO MEMORY ID 'PERNR_0007'.
Get Planned Time 0007 Data
CALL FUNCTION 'Y_HR_DIFF_PERNR_0007_DATA'
EXPORTING
period_begda = gs_icm_exp_hist-begda
period_endda = gs_icm_exp_hist-endda
refresh = space
UPDATE = space
TABLES
diff_tab = gt_diff_tab
del_tab = lt_del_tab.
ELSEIF gs_icm_exp_log-msgno = c_msg_107.
EXPORT gr_pernr TO MEMORY ID 'PERNR_0016'.
Get Contract Element 0016 Data
CALL FUNCTION 'Y_HR_DIFF_PERNR_0016_DATA'
EXPORTING
period_begda = gs_icm_exp_hist-begda
period_endda = gs_icm_exp_hist-endda
refresh = space
UPDATE = space
TABLES
diff_tab = gt_diff_tab
del_tab = lt_del_tab.
ELSEIF gs_icm_exp_log-msgno = c_msg_108.
EXPORT gr_pernr TO MEMORY ID 'PERNR_0077'.
Get Additional Personal 0077 Data
CALL FUNCTION 'Y_HR_DIFF_PERNR_0077_DATA'
EXPORTING
period_begda = gs_icm_exp_hist-begda
period_endda = gs_icm_exp_hist-endda
refresh = space
UPDATE = space
TABLES
diff_tab = gt_diff_tab
del_tab = lt_del_tab.
ELSEIF gs_icm_exp_log-msgno = c_msg_109 .
EXPORT gr_pernr TO MEMORY ID 'PERNR_0105'.
Get Communications 0105 Data
CALL FUNCTION 'Y_HR_DIFF_PERNR_0105_DATA'
EXPORTING
period_begda = gs_icm_exp_hist-begda
period_endda = gs_icm_exp_hist-endda
refresh = space
UPDATE = space
TABLES
diff_tab = gt_diff_tab
del_tab = lt_del_tab.
ELSEIF gs_icm_exp_log-msgno = c_msg_110.
EXPORT gr_pernr TO MEMORY ID 'PERNR_2001'.
Get Absences 2001 Data
CALL FUNCTION 'Y_HR_DIFF_PERNR_2001_DATA'
EXPORTING
period_begda = gs_icm_exp_hist-begda
period_endda = gs_icm_exp_hist-endda -
Dynamic HtmlPanelGrid - Not Refreshing
Hello,
I'm using the binding attribute of the <h:panelGrid> tag to reference a dynamically created HtmlPanelGrid on a backing managed bean. The HtmlPanelGrid is constructed on the fly based on data from the database.
All is well the first time the JSP is displayed.
When I navigate away from the JSP and return to it later via an action method that returns a navigation rule string, the HtmlPanelGrid is not getting refreshed.
I suspect the original HtmlPanelGrid is hanging around out there in session somewhere ... possibly in the ViewRoot/component tree. I can't understand why it's not getting reset on the subsequent visits to the page. I was under the impression that if you navigated to a page via a navigation rule that the component tree is refreshed. Is this not the case?
I have tried assigning unique id's, playing around with "transient" on the component (with unpredictable results, I might add). Not sure what fooling around with client side state saving would get me -- or if I even want to fool with that.
I have been using JSF now for nearly 2 years and really like it, but this has got to be the most frustrating thing I have come across.
Any ideas? Thanks in advance.I'm happy (but a little embarrassed) to report the duplication was a result of a session scope List that was not getting cleared at the beginning of the page prep process. JSF appears to be working fine -- the problem was 100% programmer error!
-
How to publish contextual event from dynamic region
Hi Experts, plz help.
Scenario :
I have a page , say Page A.
I have two bounded task flows, say HeaderTF and LinesTF.
HeaderTF is placed as a static Region in page A and LinesTF is a dynamic region in page A.
LinesTF has a table with Amount Column.
HeaderTF has a text field which shows the total of amount column.
Requirement :
when user adds new rows or changes existing rows or deletes any rows in LinesTF, total field in HeaderTF should be updated.
On change of amount value in lines, I am calculating and updating the total attribute of header VO as all of them are sharing same DC.
but the value is not reflecting becos partial triggers cannot be kept for total field.
So I am using contextual events.
I created a contextual events for amount field, delete button and table as well (In LinesTF).
and I created handler method in AM which calculates total and dragged it as a text field in HeaderTF.
Now when I am trying to subscribe from pagedef of pageA, i am able to find the handler which is created in HeaderTF but could not find any contextual events in event lov.
Question :
1. Is my approach correct?
2. Cant we publish contextual events from dynamic regions?
3. Is there any alternate way of achieving this?
I did not try refreshing HeaderTF by passing input params because I dont want the entire region to be refreshed.Try creating the event mapping - please see "28.7.2 How to Create Contextual Events Manually" in Dev Guide http://download.oracle.com/docs/cd/E15523_01/web.1111/b31974/web_adv.htm#CACJBFGI
-
Report doest get refreshed with updated data
Hi All,
I am facing a strange problem, where my report doest get refreshed with updated data when it’s called second time.
1. Screen1 – Preview option – Preview Screen
2. Preview Screen – Print option (Button) – Report generated and displayed in the IE Browser window with a dynamically generated PIN (Query written in WHEN-BUTTON-PRESSED trigger)
3. Screen2 is displayed in the backend
4. Screen2 – Cancel option – Screen1
5. Screen1 – Preview option – Preview Screen
6. Preview Screen – Print option (Button) – Report generated and displayed in the IE Browser window with a same PIN as in step2. Actually here the Query written in WHEN-BUTTON-PRESSED trigger generates a new PIN.
7. When checked in the backend this new PIN is updated, but the same is not displayed on the Report. That means to say that report is not refreshed. When I click on the refresh button in the IE Browser window explicitly, the report is refreshed and displays the PIN as found in the backend.
What I expect is that the report should get refreshed automatically with a new PIN, when I choose Print option in Preview Screen.
Can anybody help me in overcoming this challenge?
Regards,
SAMHi All,
What i did was i encoded the PIN and sent it as a paramter to call the report.
In the report i decoded the PIN and printed it. This way my URL to call the report was always updated with the decoded PIN value and would refresh the page successfully, everytime its called.
Regards,
SAM -
Tableview getting refreshed when changing data in the rows
Hi Gurus,
Iu2019m doing a BSP with MVC. The requirement is as below.
In the main page there is a button u2018Create Orderu2019, to create a sales order, once I click this button, another screen (pop up) comes up and within that I have a Tableview display with the below fields with the data of 20 records.
Material no
Quantity
Delivery Date
Here user is allowed to choose the quantity and delivery date by selecting each row.(with MULTISELECT option in BSP)
The issue is after I select first row and change the quantity and date, and if I click on second row, the Tableview gets refreshed to enable the second row to be editable and the changes what I did on the first row are also refreshed.
So i want the Tableview not to be refreshed when selecting the multiple rows. So that I can keep the changes I make to the quantity and date fields Can you please suggest any method.
Cheers,
Srini.Hi Srinivas,
You need to capture the value entered by user in Quantity and date field and update the internal table with these values for the current selected row.
For ex.
The tableView code is like:
<htmlb:tableView id = "material"
headerText = "<%= otr(Z_SUS/HEADER_TEXT_MATERIALS) %>"
headerVisible = "true"
design = "alternating"
onRowSelection = "MyEventRowSelection"
selectionMode = "MULTILINEEDIT"
width = "880"
filter = "SERVER"
emptyTableText = "<%= otr(Z_SUS/EMPTYTABLE_MATERIALS) %>"
iterator = "<%= iterator %>"
table = "<%= gt_materials %>" />
In eventhandler OnInputProcessing :
DATA: lt_fields type tihttpnvp ,
ls_fields like line of lt_fields.
call method request->get_form_fields
changing
fields = lt_fields
Now the internal table lt_fields contains all the editable cell values , just update the internal table of your tableview with these values.
You can try these threads
[Thread-I.|Re: Retrieve changes made in tableView]
[Thread-II|https://forums.sdn.sap.com/click.jspa?searchID=24460585&messageID=5516977]
Search the forum for more information on this.
Regards,
Anubhav -
Data is not Getting refresh in Dashboard
Hi I have implemented Xcelsius on the top of SAP BI System.
I have the following architecture -
SAP BI Cube --> BO XI 3.1 Universe Based on Cube --> QWaaS on the Universe --> Xcelsius Dashboard on the QWaas.
When i created a dashboard and run it , it worked fine and showed me data , which is lying in Cube.
But When the Data get updated in Cube and i again refresh the Dashboard , It still showing me the old data , the Data is not getting refresh in Dashboard .
what could be the possible casue ?
Is QWaas always fetch the dat at run time ?
ThanksQaaWS web service call needs to be invoked to get the data updates from the datasource. Xcelsius provides several options to command how frequently web services connections are calle/refreshed ('refresh on load', 'refresh every X seconds' or trigger cells...).
You should also keep in mind, that, since QaaWS hits datasource each time web service is called, this can bring some performance issues (web service calls WebI server to run corresponding query, which performs a refresh). In order to mitigate this, since XI 3.0, QaaWS features a cache mechanism, that is used to store data results from each query refresh (corresponding to a web service call), in order to serve it again with better efficiency, in case same request is performed during a specific time interval (which typically corresponds to dashboard interactions).
Cache sessions are sorted according to the user names and prompt values used, cache is emptied after a defauilt duration without any interaction (request from the same session).
Cache timeout duration is set for each QaaWS query, and can be tuned from QaaWS Designer when modifying/creating the query : go to Advanced... button on first step of query edition wizard, cache lifetime corresponds to timeout value (in seconds) displayed on Advanced parameter panel (default value being set to 60 seconds).
Cache lifetime may also be an explanation why you do not see data refreshed (if you are with QaaWS XI 3.0 or later).
Hope that helps,
David. -
Report is not getting refreshed after changing prompts once again?
HI,
I am running some webi and deski reports using webi sdk also i'm handling the prompts of
report.
Problem is that if i ran the parametrized webi or deski report then my application shows the prompt page
then i fill all the prompt for the report it shows the data for selected prompt values.
But if i once again changed prompt values it shows data of previously selected prompt values not for
the currently changed prompt values. means reports not getting refreshed.
sometimes its work correctly.
What will be problem?
How can i resolve this issues?
Please help me
Thanks in advance
HarshadThe workflow is:
1. Refresh
2. Set Prompts
3. Get View.
then repeat.
Are you refreshing before setting prompts?
Sincerely,
Ted Ueda -
Tree Table is not getting refreshed properly in Jdev 11.1.2.0
Hi,
I am seeing a peculiar issue with tree table not getting refreshed in Jdev 11.1.2.0.
Let me explain you my use case.
I have a tree table in a page, where the first column is displayed as selectBooleanRadio component. When user selects this selectBooleanRadio component, that treetable node should get expanded and at the same time all the child records(I have a select boolean check box component(transient attribute) at the child level) for that node should get selected. This is to allow user to unselect the child records, which he/she does not want to process further(some functionality).
Now when the user selects any radio button, the tree table node is not expanded, but the arrow beside the radio button for that node can be seen as expanded.
I thought it may be a partial trigger issue, so i tried refreshing the tree table programatically as well. But it was of no use.
Then I set the partial triggers wrt to SelectBooleanRadio component on the parent container of the TreeTable. After which somehow the node got expanded but the tree table shrinks in width and the actual disclosure functionality of a tree table is lost.
The same use case works perfectly fine in Jdev 11.1.1.5.
For reference:
I created a sample test case(Dept/Emp) in jdev version 11.1.1.5, which works fine. Workspace: http://adf-use-cases.googlecode.com/files/TreeTable1.rar
But the same test case, when i created in jdev version 11.1.2.0, gives issues. Workspace: http://adf-use-cases.googlecode.com/files/TreeTableUseCase.rar
If you download the application and run in respective jdev version, you will get to know more about the issue.
Please let me know, If I am doing anything wrong in the implementation of this use case.
Any help/suggestions are appreciated.
Thanks
Umesh
Note: My complete application is in Jdev 11.1.2.0, so I can't degrade my jdev version to 11.1.1.5.Thanks Frank for the reply.
But upgrading the jdeveloper to 11.1.2.2 is not an ideal solution for us now, because of the size of the project.
Some how, the issue of refreshing the tree table is resolved. I am using a command button with clientComponent to true and causing a full page refresh.
I am not sure, if this is a perfect solution.
As you said, that this behavior may be an issue with the Jdev version 11.1.2.0, I am using. I am going with the above said approach. -
Values not getting refreshed in web report.
Hello Friends,
Currently i am running an web report. The scenerio is i have check box with 5 options For Ex: IMS , IMR, IMN,IMM,IMP.
IMS is the combination of all divisions and IMR is the combination of only three divisions.
In BEx we runthe report with divisions . For ex : divisions are Ind1, ind2,ind3,ind4,ind 5.
Instead of displaying divisions in the select options like Ind1,ind2....etc., we have created a structure in the report
and using new selection we have restricted the divisions with IMS,IMN,etc.,
IMS->combination of all divisions. IMR is combination of ind1,ind2,ind3.
IMN... all are with single divisions
Now we have assigned the query in the data provider for select options in hte web report,
But when we select any options the values of the remaining queries are not getting refreshed.
If we use the divisons directly with out using the structures the values are getting refreshed.
Can any one give me the solutions for this?
Regards
SrinivasHi Mansi,
Check the Prompt properties in the Edit Query window of the webI. In the query filters section of window, click on the blue icon which says Prompt Properties. Deselect Keep Last values select and run the webI again.
If the solution is not related to your question, please provide more details.
Thanks,
Rajesh -
Message not getting refreshed in bsp pages.
Hi experts,
An error message which is getting displayed should be removed on leaving the page. I mean the meassage area is not getting refreshed on leaving the page. Everytime i need to refresh the page to remove it. Please help.
Abhi.hello Friend,
Please clear the internal table / work are used to show message in OnInitialization method of the BSP page.
now It is not getting cleared at the time leaving the page and data stays in memory...
Thanks
K.
Maybe you are looking for
-
TS1702 On the game "pinball HD" for the Ipad the right flipper does not work on my 2 ipads
I have two ipads one is the original that first came out and the other is an Ipad mini. I have installed on both the piball game "pinball HD". On both devices the right flipper on the game does not work. Seems strange it is happening on both my d
-
Is there a way to have everything the same on every machine on the network?
Is it possible to have the same icons, desktop, files, etc. appear on every machine a person logs in to on an open directory network?
-
[SOLVED] vlc video for UK HD dvb-t2 won't show
I'm trying to use vlc 2.2.0 to display UK dvb-t2 HD channels. I can get sound, but no video is displayed. Normal mpeg-1/2 video channels are fine. The video streams say Codec: H264-MPEG-4 AVC (part 10) (h264); I think I have relevant codecs installed
-
SCOM 2012 R2 HA design but using SQL 2014 Standard edition
Hi All, I want to deploy SCOM 2012r2 with a HA design (but have constraints!) Plan is two management servers with all roles to each (fresh deployment so 2012r2 RU5) SQL servers need to be 2014 standard edition due to licensing and cost constraints. D
-
Forall bulk delete is too slow to work,seek advice.
I used PL/SQL stored procedure to do some ETL work. It is pick up refeshed records from staging table, then check to see whether the same record exists in target table, then do a Forall bulk deletion first, then do a Forall insert all refreshed recor