Dynamic templates for iWeb??

Is there somewhere I can go to get (buy, have designed) a 'dynamic' template designed for iWeb, that allows me to create as many pages as I want ... and THEN functions so that when I change something, a bit of text, in the original template ... ALL the pages built from that template change automatically all at once?
I do this all the time in Dreamweaver, and would like to be able to do the same in iWeb ... which I'm finding very attractive as a designer app.
Ben

Ben,
I know what you are asking for and I don't think it is available. The best person I can get you in contact with is Suzanne Boben over at 11 Mystics...
http://www.11mystics.com
She's one of the early pioneers in customizing iWeb templates and she might be able to offer more insight into your situation. Good luck!

Similar Messages

New Templates for iWeb?

Hello~
Does anyone know if there are additional templates to use for iWeb? If so, where can I find them and add them to my current library of templates that came with iWeb?
Thank you.
Corina

There are several 3rd party templates. Just do a Google search for "iWeb templates" and you'll get numerous hits for the sites.
OT

Flash templates for iweb

are there any templates where we can insert flash into an existing iweb site?

I just finished dealing with this battle. First the code that was provided to you from Carson (first reply) is crucial to load your flash movie into your website. Follow his instructions and you will easily be able to add flash movies.
Now for creating the content. There is a couple of options. I used iWorks '08 Keynote to create a flash introduction. Basically you can create a slide show with animations and then convert it to Quicktime. You can either use the Quicktime file as a movie insert or convert the Quicktime to a flash file. Please note that the export to flash feature within Keynote will remove alot of your slide transitions and animations. Thus, if you want flash you should export it to Quicktime to keep all transitions and animations. Then you can use Adobe Flash C3 to convert it to flash or any other flash converter software (such as the products sold from the link posted above).
If you want to get a little flashier there is a software called The Ad Creator (http://www.flashadcreator.com/)
This software has about a 100 templates for flash introductions. It is meant for companies but you can easily adapt it to your personal website by adding photos and changing captions. I just bought it but have not done anything yet on my website.
You can view a sample introduction made from Keynote and then converted to flash on my website.
http://web.mac.com/brademcee/Site/WeintraubFamily.html
Hope this helps!

Anyone know how to make a personal template for iWeb 2.0?

Seems things changed in the content folder and descriptions for the previous version are unusable.
I don't understand why there isn't a chapter in the manual for this! Isn't it un-Applish to not let the mac users roam free with their creativeness… or is it to complicated?
Well, I just know how I would like the webpage to look and I would prefer to do it in iWeb. This is particularly since such a lot of people go on to use Explorer instead of rashing it and iWeb so far has been safe, that is wysiwyg, also for Explorer.
Cheers, Viveka

One of the things I do when creating a new website is build what I call a "master" page. This is the basic page I am going to use throughout the site.
To do this you have to be saving your individual sites to separate folders.
Make a copy of your domain.sites2 file and put it in a folder named "website master page".
Click this file to launch it in iWeb, delete all the pages and rename the site Master Page.
Build your master page and save.
When you want to start a new site using this page all you have to do is copy the file and paste it into a folder "New Website", launch it in iWeb and duplicate it as many times as you want.
Using this method you cannot, obviously, use gallery, photo, blog etc.
Mostly, I don't use them anyway for anything but personal sites.

Templates for iWeb 08

So from what I can tell, iWeb 08 web templates are pretty hard to come by?
Where can I get good ones?

You must not be reading the same stuff I am because the following is taken from that site
"+I can’t publish+
+Try the things listed here in the same order as they are listed step by step following instructions to the word:+
+If you publish to .Mac be sure to have the account setup right in System Preferences => .Mac+
+- - - - -+
+Some people report that the following tip solved their publishing issue (most useful):+
+“I was having problems+"
I am not pasting the rest of it here as it is quite long but I am sure there are several suggestions there that address the publishing issue.
Mireille

Which holder can I find all the template for iWeb?

I would like to customize the existing iWeb template, but I cannot find where iMac store all those templates. I'd appreciate it very much if someone can tell me which holder iWeb hides its template.
Thank you.

From within iWeb, just click on Add New Page at the bottom and all page templates are displayed. Choose the one you want and you can then add or take away or do anything you want with it.
If you want your own design entirely, I would suggest that you start with a blank canvas with a white template. Then you can do whatever you want.

Looking for an 'opt-in form' template for iWeb??

Building a site that will see serious traffic on Sunday. Need to embed an 'opt-in' form. Have no idea how to do this in iWeb.
It would be nice if I could combine an 'opt-in' form with an 'autorespond' ...
Is this something that would be possible on an iWeb site, and could I do it fairly easily\quickly?
Ben

http://www.varkgirl.com/Varkgirl/Add%20forms.html

Problem with Great Estate Template in iWeb

Having problems with the Great Estate template for iWeb: On the blog, the picture shows up fine, in the larger, overview version it is all blurred. The software company cannot help me, say it is a program flaw in iWeb? Has anyone else encountered this problem and how did you fix it? Thanks

I have been corresponding with the company in Lithuania for a few days and we have tried everything we could think of to solve the glitch. I am very much aware of the fact that it is a custom theme, in fact I have further customised it.
The website in question is a private one. In my home country, we are legally required to post our address on the page. I would not want to braodcast that across the Apple community, if I can help it, so that is not an option. Sorry.
I would really appreciate if someone who uses GraphicNodes templates could help me out. Thank you

Expansion Logic in Dynamic Templates

Hi,
When a dynamic template for input schedule is expanded, multiple EVSND are created. If i replaced the EVSND in the first cell at the intersection of the first row and first column with let's say EVDES, and after expanding this dynamic template again, i will get EVDES in all the cells previously housing EVSND. Note that this won't happen if i entered EVDES at any other intersections, i.e. 1st row and 3rd column, 5th row and 5th column.
My question is: where can i find the logic that controls this expansion?
Cheers

Hi Lip,
It is difficult to exactly point out the where this expansion functions are put up in your Schedule as it depends on your design. But you can check for EVEXP or EVNXP function in the sheet. Seeing the range which EVEXP covers, you will understand the expansion range.
Kranthi

Dynamically set template for Print Quote report

We need to customize "Print Quote" in Quoting
As part of this we will be having 2 custom templates (will be related to data definition "Quote Printing", ASOPRT).
These two templates have to be defaulted based on the quote status - one for status "Approved", and the other template for other non "Approved" statuses.
How can this be achieved dynamically? (OAF CO customization / personilization)
There doesn't seem to be any setup for assigning different templates based on status.
Profile option "ASO: Default Layout Template" can be utilized to change the default template, but we need this template to be defaulted dynamically based on the Quote status.
Thanks,
Sumanth
Edited by: user1131947 on Oct 25, 2011 3:51 AM

If you want to create a custom report using concurrent program then refer:
http://apps2fusion.com/apps/apps/63-xml-publisher-concurrent-program-xmlp
If you want to create a custom report using OAF page then refer:
http://apps2fusion.com/at/51-ps/260-integrating-xml-publisher-and-oa-framework
-Anand

Can LC Designer produce a flat PDF, not form, as a template for dynamic content?

Can LiveCycle Designer produce a flat PDF, not form, as a template for dynamic content?

Yes that means LiveCycle Designer .....the XDP is an XML file that describes the template that you want. It is turned into a PDF by the Designer as well as the LC Server I mentioned. The Designer creates interactive content (not what you asked for), the server can do the same as well as flat PDFs. I mentioned the batch mode because that is how people generally use it or they use it for real time creation of the reports but it tends to be high volume (it is a server product so it will bepriced that way). You can create an XDP that has text and "floating fields" on it. Floating Fields are special in that you can merge data with the template and once the data is put into the field it is turned into text (non-interactive). This woudl be useful for testing (requires a hands on approach) but if there is any kind of volume that you are looking for this will not be useful. The server side can be automated so that no human intervention is required.
Paul

Unable to enforce a UI Template for a Dynamic Page

Hi,
I have a problem ,am unable to enforce a UI Template for a Dynamic page.As I want to modify the background color and font for the contents of the Dynamic page.I have tried to specify these in the htp functions,which works fine but when I expose the dynamic page as a portlet and drop it in a page ,the background color and font modifications do not show up.
Any idea as to how the modifications can be done to show up in the page?

I changed the pref.js file and that fixed the problem. thanks to those who responded to this question and for the quick replies. jjg18

Do not apply Templates for dynamic page

Hi,
When i add a tag <ORACLE> ...</ORACLE> then all code before this tag don't displate.(I have viewed source after apply template but did't see code before Oracle tag).
Could you tell me the way to sovle the problem.
thanks !
thangtk

Dear Candace ,
- I have a dynamic page that includes oracle tag (<oracle> </oracle>).Run it ok .
-When i apply my template(user template) then dynnamic don't display all component of Template.
-I had viwed source code (dynamic+template) .I only see componet code begin <oracle> to end. (contains HTML outside <oracle>..</oracle>) and all code before <oracle>..</oracle> to lose .
Ex:I have a code
<html>
<head>
<title>
</title>
</head>
<body>
<table>
</table>
<oracle>
begin
htp.init();
htp.p('..');
end;
</oracle>
</body>
</html>
run it anh view source then i only see:
<oracle>
begin
htp.init();
htp.p('..');
end;
</oracle>
</body>
</html>
I lose code.
<html>
<head>
<title>
</title>
</head>
<body>
<table>
</table>
I think that Templates don't display ,the same cause.
I hope you will reply quickly for you.
thanks very much !
(sorry ,I write very bad)

New iWeb theme templates for sale

I thought I saw several new iWeb theme templates for sale several weeks ago about the time the 1.1 themes came out. They were priced at around $12 or $15 dollars or so. Anyone know where they are?
Thanks,
Chuck

Hi Chuck!
It's been a long time since I've seen you around! Welcome back.
Suzanne Boben is the queen of the iWeb templates. She sells her custom created templates on her website:
http://www.11mystics.com
Take a look. Hope it's what you were looking for. I know she's been busy with her latest creation "Aerolite". Good luck.

Dynamic template/layout creation in report for web

Hi,
I need some info on how to create dynamic template in report 3.0,
I have to develope one report and it does not have a predefined
template. The display and query will change according to an user
input through parameter form. I have an idea, I have designed a
meta data table to create the template and populate the template
with the query, The report will also take input from the
user(this one I have already figured out, I can embed
Javascript/HTML coding to display edit box/check box etc.). What
I m looking for is a way to generate dynamic template. Like is
there any SRW kind of feature which I can use in
after_parameter_form to create a dynamic layout, pls respond if
anyone has done this before or have any idea
Ranjan
null

Hi Ravi,
I worked on the same requirement but from a service perspective. So below are the activities I maintained to achieve this.
1. Create a service order template type (copy of std).
2. Maintain the copy control settings for both header and items to the service order quotation.
3. Create Service Order Templates and enter the commonly used items in the template. Release the service order template.
4. When creating a service order quote - at the item level, you can see the button "Copy from Template". Click on this
5. This opens up a pop-up where in you can search for all released service order templates.
6. Select the one you need, the items maintained in that order template is copied over to the service order quote.
So the user does not need to enter all the items manually. This is how you user order templates. Please note that it copied only the items, not the header details of the service order template.
Regards,
Siraj

Dynamic templates for iWeb??

Similar Messages

Maybe you are looking for