Dynamic templates tab

Hi ,
I am in BPC MS 7.0 with SP7 .
While openning dynamic templates tab ...i am getting fallowing message ..
"the discription information is missing , contact your administarator "
I have admin access for BPC system and this error appear in only capex application , remanning applications , i am able to open dydnmic templalates.
pls let me know any inputs ..
Regards,
PSR

Hi ,
I am using generic application and type is reporting .
Recentely we upgraded SP2 to SP7 .
But remanning applications are working fine .
pls let me know any inputs ...
Regards,
PSR

Similar Messages

Dynamic Template report on multiple tab

Hi
I am trying to develop reports using dynamic template .Now I want another template on another Tab ( work sheet ) on same work book .Can any body suggest me how to do it ?
Let me explain in another way. I want multiple template reports on multiple tab of same work book.When I go to next new blank sheet , I don't get reporting option on action pane.
Thanks
SN

Perhaps you could solve this using existing Excel functionality as follows:
Right click on the worksheet name of the sheet with the existing report (eg. Trend)
Select Move or Copy
Choose the Create a Copy check box
Click OK
if building an EVDRE on the new sheet, you could type =EVDRE() then click on the Refresh Workbook button in the BPC toolbar.

Printing a Dynamic Template !!

Hello ,
I have a user requirement to print the Dynamic Template excel with the selected parent node (costcenter) and all the nodes below it one by one .
example :
Parent node = XX1
     Child nodes          XX2
                                       XX3
                                       TT3
                               YY2
                                        QQ3
                                ZZ2
                                        DD3
                                        EE3
                                        CC3
User requirement : when he/she selects the parent node XX1 and opens the Dynamic template and print it . It should also print the next level child nodes XX2 , YY2 & ZZ2 .   Would like to know if this is even possible ? If yes , how can we achieve this ?
regards
Ram

Thanks for the quick reply Roberto/Bpc user,
My User requirement is that he wants more flexible printing with dynamic report though its excel . He wants to select a top node ( member ) and be able to get the resultset not just for the top node selected but also all the nodes below in seperate excel Tabs . I am dont think its feasible. But then someone mentioned about E-publish and printing multiple reports . So my question ..is there a way we select the Parent node and it passes all the Subchild lvl1 nodes in separate pages of the same report and print them to pdf or printer ?
Any suggestions on Printing the reports will be much appreciated.
Regards
Ram

Error while opening the dynamic Template

Hi Experts,
While opening the Dynamic Templates in application in Sap Bpc it will give me an error: Description information is missing: contact your administrator. Please help me in this.

Hello,
Please try the following:
Clear the client cache if the problem is with a single client:
In BPC for Excel, click the eTools menu and select u2018Client Optionsu2019.
Click u2018Clear local application informationu2019.
Click u2018Refresh Dynamic Temnplatesu2019.
This will force the client machine to download the templates again.
Change the template version for the Application Set (AppSet) if the problem is with multiple clients:
Launch the BPC u2018Interface for the Webu2019.
Select u2018Administrationu2019.
Select u2018AppSet Parametersu2019.
Find the TEMPLATEVERSION parameter.
Increment the value by one. For example, if the value is .103, change the value to .104 and click the Update button.
This will force all of the client machines to download the templates again.
Manually download the files:
These files can be found in two locations.
Check the local machine for the files:
Check the local paths on the client machine to see if the needed files are there. The local paths for these files are:
My Documents\PC_NW\<domain>\<user>\AppInfo\<applicationset>\<Application>\eExcel\Reports\Wizard.
My Documents\PC_NW\<domain>\<user>\AppInfo\<applicationset>\<Application>\eExcel\Input Schedules\Wizard.
The files should be:
DESCRIPTION.TXT
IMAGE#.BMP
TEMPLATE#.XLT (where # is the specific number of the file).
If these files do not exist, they can be copied over from a working system. If all systems are giving this error, the files can be retrieved from NetWeaver.
To find the files in NetWeaver:
Run transaction UJFS.
Expand u2018webfoldersu2019.
Expand the Application Set (AppSet).
Expand the Application.
Expand u2018eexcelu2019.
Expand u2018reportsu2019.
Expand u2019wizardu2019.
The files located in this directory should also be located in My Documents\PC_NW\<domain>\<user>\AppInfo\<applicationset>\<Application>\eExcel\Reports\Wizard.
To download all of these files, right click the u2018wizardu2019 folder and select u2018Download All Documentsu2019.
Once the files are downloaded, unzip them into the local directory.
go back to u2018eexcelu2019 from Step 5.
Expand u2018input schedulesu2019.
Expand u2019wizardu2019.
The files located in this directory should also be located in My Documents\PC_NW\<domain>\<user>\AppInfo\<applicationset>\<Application>\eExcel\Input Schedules\Wizard.
Follow Steps 9-10.
If these files do not exist in NetWeaver, they may not have been transported properly. If this is the case, go to the source system and download the files and then right click the folder in NetWeaver and select u2018Upload Document from PCu2019 on the destination system.
Best regards,
Vin

Cannot copy a section in new "Pages 5." Miss "dynamic templates."

I loved being able to create a document with tables, graphics and other detailed material on a page that was its own "section." Then when I wanted to re-use it IN THAT SAME DOCUMENT, like an order form for example, I could copy it as many times as I liked in the same docuemnt, delete whatever parts were not needed in the copy and use it as a kind of "dynamic template."
How do you copy a whole page all at once with complex content in the New pages?

You can't really, other than to manually select all the content starting at the top of the page and paste elsewhere.
Working with pages as pages has been abandoned in Pages.
I'm sorry.

How to set field length in Dynamic IT tab

Hi All,
             I am creating 1 dynamic internal table with refrence of field catalog, but in the dynamic IT tab and work area i am gettinf field length is 10 char.
But i want to change this into 15 or 20 char like this.... how can i change this
Please help me .
DATA: ep_tab TYPE REF TO data,
      new_line TYPE REF TO data.
FIELD-SYMBOLS: <l_table> TYPE table,
               <l_line> TYPE ANY.
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      I_STYLE_TABLE   = c_char
      it_fieldcatalog = it_fieldcatalog
      I_LENGTH_IN_BYTE = ' '
    IMPORTING
      ep_table        = ep_tab.
ASSIGN ep_tab->* TO <l_table>.
CREATE DATA new_line LIKE LINE OF <l_table>.
ASSIGN new_line->* TO <l_line>.
This is my code.
Regards,
Arjun.

Hi,
try this
** ALV DECALRATION
DATA : wa_lvc_cat TYPE lvc_s_fcat,
       gt_lvc_cat TYPE lvc_t_fcat.
DATA : wa_fieldcat TYPE slis_fieldcat_alv,
       gt_fieldcat TYPE slis_t_fieldcat_alv.
DATA : wa_slis_layout TYPE slis_layout_alv.
PERFORM create_dynamic_itab.         " Fill fieldcatlog and create dynamic itab
*&      Form CREATE_DYNAMIC_ITAB
*       text
* --> p1        text
* <-- p2        text
FORM create_dynamic_itab .
CLEAR g_pos .
PERFORM fill_gt_lvc_cat_fld USING 'MATNR' 18 . "fieldname outputlen.
PERFORM fill_gt_fieldcat_field USING c_x 'MATNR' 'CHAR' 18   text-006.
PERFORM fill_gt_lvc_cat_fld USING 'CODE' 40 .
PERFORM fill_gt_fieldcat_field USING ' ' 'CODE' 'CHAR' 40 text-024.
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = gt_lvc_cat
    IMPORTING
      ep_table        = new_table.
ENDFORM.                    " CREATE_DYNAMIC_ITAB
*&      Form FILL_gt_lvc_cat_FLD
*       text
*      -->P_0006   text
*      -->P_18     text
FORM fill_gt_lvc_cat_fld USING   p_fieldname TYPE any
                                  p_outputlen TYPE any.
wa_lvc_cat-fieldname = p_fieldname . " 'MATNR'
wa_lvc_cat-outputlen = p_outputlen.   " 18
APPEND wa_lvc_cat TO gt_lvc_cat.
CLEAR wa_lvc_cat.
ENDFORM.                    " FILL_gt_lvc_cat_FLD
*&      Form FILL_GT_FIELDCAT_FIELD
*       text
*      -->P_C_X text
*      -->P_0012   text
*      -->P_0013   text
*      -->P_18     text
*      -->P_TEXT_006 text
FORM fill_gt_fieldcat_field USING    p_key        TYPE any
                                      p_fieldname TYPE any
                                      p_datatype   TYPE any
                                      p_outputlen TYPE any
                                      p_seletext_m TYPE any.
g_pos = g_pos + 1.
wa_fieldcat-col_pos    = g_pos.        " 1.
wa_fieldcat-key        = p_key .       " c_x.
wa_fieldcat-fieldname = p_fieldname. " 'MATNR'.
wa_fieldcat-datatype   = p_datatype.   " 'CHAR'.
wa_fieldcat-outputlen = p_outputlen.                     " 18.
wa_fieldcat-seltext_m = p_seletext_m. " text-006.   "'Material'.
APPEND wa_fieldcat TO gt_fieldcat.
CLEAR wa_fieldcat.
ENDFORM.                    " FILL_GT_FIELDCAT_FIELD
PERFORM fill_output_layout.          " Fill the output data into field symbol
*&      Form FILL_OUTPUT_LAYOUT
*       text
* --> p1        text
* <-- p2        text
FORM fill_output_layout .
ASSIGN new_table->* TO <fs_table>.
CREATE DATA new_line LIKE LINE OF <fs_table>.
ASSIGN new_line->* TO <fs_line>.
LOOP AT gt_mseg INTO wa_mseg.
      ASSIGN COMPONENT 'MATNR' OF STRUCTURE <fs_line> TO <fs_field>.
      <fs_field> = wa_mseg-matnr.
    READ TABLE gt_grdtrans INTO wa_grdtrans WITH KEY mawerk = wa_mseg-WERKS
                                                         matnr = wa_mseg-matnr
                                                         mat_doc = wa_mseg-mblnr binary search.
        IF sy-subrc = 0.
        LOOP AT gt_qmfe INTO wa_qmfe WHERE qmnum = wa_grdtrans-qmnum.
         READ TABLE gt_qpct2 INTO wa_qpct2 WITH KEY codegruppe   = wa_qmfe-fegrp
                                                     code        = wa_qmfe-fecod
                                                     BINARY SEARCH .
          IF sy-subrc = 0.
          ASSIGN COMPONENT 'CODE' OF STRUCTURE <fs_line> TO <fs_field>.
          <fs_field> = wa_qpct2-kurztext.
         ENDIF.
         endloop.
         clear wa_qmfe.
        ENDIF.
ENDLOOP.
    CLEAR wa_mseg.
PERFORM fill_layout.                 " Filling the layout of REUSE_ALV_GRID_DISPALY
*&      Form FILL_LAYOUT
*       text
* --> p1        text
* <-- p2        text
FORM fill_layout .
wa_slis_layout-zebra             = c_x.
wa_slis_layout-colwidth_optimize = c_x.
ENDFORM.                    " FILL_LAYOUT
Edited by: ShaliniSinha on Mar 30, 2009 1:49 PM
Edited by: ShaliniSinha on Mar 30, 2009 1:55 PM

Cannot open a report I just saved via Save a Dynamic Template

Hi All,
I am on BPC 5.1 SP9, working in Office 2007.
The problem is happen sporadically, where I save a report using Save a Dynamic Template. Then try to open up the report I just saved, and the report does not open. Sometimes if I resave the report via Save Dynamic Templates, I can reopen up the report. If that does not work, I go back into Save Dynamic Template, and save it to a new name, and see if I can get the report to open.
The strange thing is I can save the report to my desktop, then go into BPC. Every time I open the report from my desktop it always runs.
Not sure if anyone has seen this before?

Does your template have an Excel 2007 4 digit extension?
There is a known issue with BPC 5.1 sp7 or higher service pack and Excel 2007 format extensions (SAP Note 1347243)
Files with Excel 2007 Extension such as XLSX and XLTX, (saved and opened repeatedly via eTool -> Save / Open Dynamic Templates menu) may have issues where the template will not open.
The problem does not exist with BPC 70M sp3 or higher.
The note also has a possible workaround; suggesting renaming the template on the File Share Server and then opening the re-named template via Open Dynamic Templates menu.
Hope this helps.

Struts-Layout layout:tabs Problem; dynamically render tabs

hi,
i have been trying to combine the <layout:collection> and <layout:tabs> tags to dynamically render tabs. (if the collection contains 5 objects, i wanna have 5 tabs, and if the collection contains 2 objects, i wanna have 2 tabs...)
like this:
<layout:form action="/someAction.do" styleClass="FORM">
<layout:tabs styleClass="FORM" width="400">
<layout:collection property="aProperty" indexId="index" >
<layout:tab key='${index}' width="50">
<layout:collectionItem title="rooms.token">
<layout:text property="aProperty[${index}].BID" layout="false" size="5"/>
</layout:collectionItem>
</layout:tab>
</layout:collection>
</layout:tabs>
</layout:form>
It renders, but it is not displayed correctly. for example, if there are 2 objects in the collection, i get 3 tabs. and the rendered html-table contains mistakes and destroys my page.
has anyone an idea what i could do?
I appreciate any help, thank you, martin

Do anyone kno more about Struts-Layout-tabs...........In a Struts forum? Probably.

The Pages/Templates tab is not showing up under Site Manager

I am working on a site, and i am unable to see the pages/templates tab under the Site Manager tab in the AdminConsole. Is there a setting I can change to fix this or is there somethign else I need to upload?
thank you

Check the permissions in the admin role to be sure that it has that set.
You should see something similiar to:

Cannot load Dynamic templates in RATE Application

I'm trying to create a new input schedule in RATE application.
When trying to open a delivered dynamic template there are no templates to display.
How can I reload or repair this issue? Have I missed something during installation or missed to activate something else
Regards.
Alberto

Thank you for your answer!
I checked the UJFS and in Rate App in my AppSet folder I do have 2 Templates, 2 images and the correspondent Description file for both templates.
But still not able to select one of them form the BPC Excel interface.
Is there something else to do or "reactivate"?
Thanks

Dynamic template in EPM 10.0 version

Hi,
I am creating a dynamic template where the Employees and Cost centers are two dimensions. Under employee dimension, cost centers have been added as properties as shown below:
ID                                           Costcenter
ALLEMP
EMP001                                   2358
EMP002                                   2358
EMP003                                   2358
EMP004                                   2358
EMP005                                   2354
EMP006                                   2354
EMP007                                   2354
EMP008                                   2354
EMP009                                   2358
EMP010                                   2354
i have designed the Employees dimension members in row n time in column. While creating the template i can see the only 2354 employees. My requirement is if i change the context member from 2354 to 2358 then only those employees must appear which are shown under their respective properties. i have already checked filter because of which i can see only 2354 members but i want it to be dynamic and also that if i select 2354 then only 2354 members must appear and vice versa. It should not be static.
Please guide.
Thank you.
Rgds,
Poonam

There are two new functions in BPC 10 that will help:
EPMAxisOverride and EPMContextMember
Assuming you are using the first report on the sheet (default report), use the following:
Build the report, then on the same sheet as the report, enter the following formula (in any cell outside of the report):
=EPMAxisOverride("000",FALSE,"EMPLOYEE","CC='"&EPMContextMember("COSTCENTER")&"'")
Assuming your dimensions are named "EMPLOYEE" and "COSTCENTER". Also, assumes the cost center property on EMPLOYEE is named "CC".
Let me know if you have any trouble.
Steve

Dynamic template report zero suppression

Hi
I have a report which was developed using dynamic template and it works fine. When I configure the zero suppression for row ( yes in control ) yes, it suppress the rows with zero in first column. So it suppress the row which has some values in second column but zero in first row. It does not suppress the rows if the first column has values but second column has zero.What I want ? to suppress zero only when all the columns ( 2 in my case ) has zero values. I donu2019t see any other configuration option in control. Can some one guide me how to suppress zero only when all the columns in any row is zero.
Thanks in advance
SN

Hi SN,
If both columns are part of the EVDRE (included in the column range and pulled from the server) then this is not the correct behavior. What version of BPC are you on (7.0/7.5, and support pack)?
If the second column is not populated with data from the server, then this could happen, depending on how you have built your EVDRE.
Can you provide more detail about how the columns are populated?
Ethan

To disable Dynamic templates in OTL

Hi,
There are 3 dynamic templates available in OTL viz. Project Assignments, Work Schedule & Last Period Timecard.
How can we disable these templates? I just need to use the Last Period Timecard, I want to disable the rest of the templates from the user.
I am unable to deactivate these timecards from the lookup HXC_DYNAMIC_TEMPLATES as the fields are protected against update.
Is there any other way? Please advise.
Thanks

I can suggest a number of options. But I have not tried this, so it may be that none of them give you what you want!
You could make the 'last timecard' the default template by using the preference Self Service Default Template Assigned by Sys Admin. You could combine this with removing the tempate functionality (i.e. having the choice displayed to the user) byusing the preference I previously mentioned. This combination might give you the desired effect.
Or, you could try setting the enabled flag to 'not enabled' on the lookup HXC DYNAMIC TEMPLATES. Although this is a 'system' lookup, you can update the flag from the 'back end'. I wouldn't recommend this as it wouldn't be supported, but it might be worth a try.
Or, you could look into the ViewObject which controls the way the list of values for templates is displayed in the LDT file for the timecard. You m,ay be able to control which values are displayed by amending this VO.
Let me know if any of these options work!
Regards
Tim

Is there any Dynamic JSF tab component support?

It seems that there're some JSF implementation support tab instead of JSF RI. but the way they work are wirte the static tags in the jsp.but my situation is -----
dynamicly create tabs according to data, where means if there is 3 options, then make to tabs. if 3, then 3 -----
if there any support out there somewhere? thanks!!

The Scales and Tomahawk libraries provides a tabbed panel.
But basically tabs are nothing less or more than a bunch of block elements layered over each other with the same amount of buttons or links at the top. If a tab click doesn't require a trip to the server, then you can just load all tab blocks at once and use Javascript+DOM to switch between tab blocks, e.g. one block should be displayed using element.style.display='block' and all other blocks should be hidden using element.style.display='none'. If a tab click require a trip to the server (to preinitialize stuff or so), then you can use the 'rendered' property of the tab block element (which can be <h:panelGroup style="display:block;" rendered="#{myBean.showTab == 1}" /> or so).
For styling of the tab blocks and tab buttons/links just use CSS.

Dynamic templates return #RFR# data

Hi Guys,
I have a problem on OUTLOOKSOFT 5, SQL2005 where all the dynamic templates (including Any by Any) on the server return a #RFR# error when trying to retrieve data on all reports. I also tried retrieving data through EVDRE, but Outlooksoft still returns an "ERRORS FOUND RETRIEVING DATA".
I can browse and process data on the cube successfully. I have processed all the dimensions and applications in Outlooksoft admin successfully...
can anyone please help...
krgds

Hi guys thanks for the replies.
Nish, I can view the data both in analysis services and sql fact tables, I have closed down excel and re-opened, expand and refresh. but still not difference.
Ozguz, how r u doint there? u need to send me ur mail. anyway, the time dimension has the correct members typed correctly i.e. 2010.Apr... and so forth..
I have noticed they have a member id "none". Is this a restricted member?
rgds

Dynamic templates tab

Similar Messages

Maybe you are looking for