Dynamic text in ALERTS

Hi,
I have one BLOCK in which I have one exception brach with control (For raising the ALERT in case of system errors) step. I have synchronous send step with in this block. This synchronous send step throws system error becuase of different reasons like system not available, JCO errors for date formats. Is there anyway I can trap this exact cause of system failure and pass it as dynamic text to control step.
Thanks
Mohan

hai mohan
i have attached some links regarding alerts i hope this may be helpful to u
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/da/a3a7408f031414e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/content.htm
Regards
Jayaraman

Similar Messages

Alerts with "Dynamic Text". Alert ID is unknown.

Hello,
I have set up an alert category with option "Dynamic Text" activated as I want to use some custom container variables in BPM.
When the appropriate control step in BPM is executed not alert is triggered.
If I try to trigger a test alert using report RSALERTTEST I get the following error:
Alert ID is unknown. Maybe the alert was not created.
Both works fine when I use a an alert category without "Dynamic Text" selected. What could be the reason for this?

Just got the alert from the integration process. RSALERTTEST still gives the same error, but most important is that the alert works during runtime.

Dynamic text in PI Alerts without using BPM

Hello everyone,
Is it possible to have dynamic text in alert mail subject or mail details without using BPM in PI?
If I want to configure generic single alert category for all interfaces in my project , and in the subject line of Alert mail, I need to have the Interface ID (unique identifier for that interface) or integration directory scenario name for which this alert has been raised, then is it possible to use some custom alert container for this purpose? Or is there any other way to have these dynamic texts ?
We are using PI7.1 in project landscape.
Thanks in advance,
Minal

Hi,
>>I need to have the Interface ID (unique identifier for that interface) or integration directory scenario name for which this alert has been raised
those two are not available in the container:
http://help.sap.com/saphelp_nwpi71/helpdata/en/d0/d4b54020c6792ae10000000a155106/content.htm
Regards,
Michal Krawczyk

BPM Alerts - Dynamic Text

Hi,
I'm triggering Alerts from BPM with Dynamic variables. In ALRTCATDEF I was not able to define the header ( Subject field on the email ) as I need to check Dynamic Text box which will deactivate Short and Long Text. Furthermore Shortext ( for example its like " Process number 00001234567 " ) in ALRTINBOX becoming Subject field in the email. So when we receive email with the Subject field as "Process number 00001234567" doesn't makes sense until you open the email.
I did gone thru the document and all the blogs and lost how to fix it.
Do anyone have the same problem?.. Please help.
Basically I want to system ID on the Subject line of the email.

Well there is an alternate solution. But as a standard using the Control Step of the BPM, this is not possible.
Trigger Alert from a UDF as shown in this blog of mine,
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
And also as shown in this blog,
/people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi
Regards
Bhavesh

Alert using Dynamic text in BPM.

Hi,
I am using dynamic text function in alrtcatdef transaction for raising an alert using BPM.
But in the alert inbox I am not getting the an alert error message which is passed to alert catagory in control step of BPM. Can anyone please let me know what may be the possible solution of it.
I have done the below configuration:
Configuration done in Alrtcatdef transaction:
Created an alert catagory
assigned the fixed recipient
click the dynamic text button in alert catagory property.
Configuration done in BPM:
Used the Control step.
given the Alert catagory name,action and the alert error message.
Please let me know the solution soon.
Thanks and Regards,
Sandeep.

HI Bhavesh,
I have referred the michal weblog and I have done the same step except the container operation step.
My requirement was to send the hard coded error message to the alert catagory so I didnt used the container operation step.
In the Control step I have hard coded my error message.
But still it is not showing in my alert inbox.
Can you please let me know is there any other settings needs to be done.
Thanks and Regards,
Sandeep.

Using alerts with variables-"dynamic text" not working

Hello all,
I'm triggering an alert from a BPM, and have set the flag "dynamic text" on for the alert category associated with it. I'm doing it in a similar way to the blog 1382 by Michal:
[/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated|/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated]
The only difference is that I'm just assigning a fixed text instead of a payload element to the container element, which I've defined as simple type - string.
However, the text of the alert doesn't show anything. I'm getting an email with just "Process <id>" as the subject and "Alert ID: <number>" in the body of the email (the same in the Alert Inbox).
I'm starting to think that there could be something wrong in PI 7.1 which I'm using, as I've configured other alerts in scenarios without BPM without problem.
Thanks for your suggestions!

I've solved it using an alert from the Enterprise Services Builder (Integration Repository). It's a new feature in PI 7.1. It seems the tab "Container" in the alert category didn't exist before (that's why you don't find it in the weblogs of Michal and others) and now you have to use it.

Dynamic text doubt

HI all
I have created alert catagory in alrtcatdef for sales order, and i configured swe2 for event. Whenever user create a sales order i have to trigger alert to users.
I have configured in alrtcatdef. I mentioned long text. Working file.
but i want dynamic text. where i have to pass the values.? i ticked in dynamic text in alrtcatdef. Then where i have to pass?

Hi !
Check this blog:
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
Regards,
Matias.

Help figuring dynamic text feeds

hello folks,
I'm trying to set up a simple flash file that uses dynamic
text to fade from one text value to another. basically it's like an
alert page that an admin would update the text file with the
necessary alerts, so that the flash file on the page would load the
appropriate new messages.
The flash would work as such: message1 would fade in and
display for a desired time, then fade and be replaced by the 2nd
message (if there is one).
It seems to me that a perhaps a javascript function or
something would be more appropriate? but I'm not familiar with
working with dynamic text so any insight would be greatly
appreciated.
thanx

Hmmm.
Well officially the .text property of a textfield is a string
so what will happen is that the 20 gets turned into string and
concatenated (or appended) the the string value in the text
property.
Can you clarfify the problem? Is your textfield changing or
not?
If it is changing then you will need to do something like:
_root.score.text = Number(_root.score.text)+20;
That requires that a valid number already exists in the
textfield. It might be safer to track the score in a separate
variable and then assign it to the textfield's text property each
time it changes.
If its not changing then try putting a trace in to see what's
happening:
on(press){
trace("textfield is:"+_root.score)
_root.score.text +=20;
If you see 'undefined' then it may just be a typo - perhaps
you called it Score with an uppercase S for example. If its defined
and nothing is visible then it could be that you've embedded fonts
without numbers or something like that.

Displaying the result of a calculation in a dynamic text box

Hi folks,
I'm having a very minor issue here (operator error, I'm sure ). With the help of some folks here, I've created a series of calculations, and I've got that part down. Now, I just need it to show up in the movie.
I've created the dynamic text box in Flash (CS3), but when I hit test, it won't show up.
After all the calculations, I should have a figure that I call totalmoney. My dynamic text box is called total. The user doesn't need to hit anything for it to appear. It just appears as part of the movie.
Here's my code:
stop();
var startDate:Date = new Date(2010,0,12); // use your startyear, startmonth, startdate in the new Date() parameters.
var currentDate:Date = new Date(); // assuming user's clock is correct and in your timezone. else use server date/time.
var numberOfSeconds:Number = (currentDate.getTime()-startDate.getTime())/1000;
var interest:Number = (numberOfSeconds*0.74356);
var totalmoney:Number = (interest+15,000,000);
function displaytotal(evt:TextEvent):void {
total.text = "totalmoney";
Any thoughts?
Thanks!
Napo

You didn't have to bury any of the calculations in the function--leaving it as you had it is better. They could remain where they a=werew, and you'll probably find you want them outside it if you have other plans for using them. If left inside, they only have scope inside. In the programming world, it's good to think of functions as things that do one thing and one thing only (though it isn't often practiced that way)--it's called modular design.
When you place an event as an argument for a function, it typically means that there is an event listener that initiates the call to the function. If you work with buttons you'll see what I mean. But if the plan is to create your own call to a function when you desire it as such, not have it driven by an event listener, then you don't need to pass any event to it, though you may pass some other type of variable to it if need be.
For instance, what you have now will call the function without an argument because the function has the value built into its code....
displaytotal();
But you could also make the function a little more generic and set it up to recieve the value instead as an argument...
function displaytotal(amt:Number):void {
total.text = String(amt); // an earlier error of mine
displaytotal(totalmoney);
That would make your function a little more useful. Now it could be used to display other Number variables as well.
// my earlier error was that a textfield displays text, so you need to convert the Number value to s String.
Hope I'm not confusing you.

Dynamic Text Field is not displaying foreign characters... HELP!

I have a dynamic text field that is not displaying foreign characters properly. They appear as boxes.
Here's what I've tried.
Under properties for the text field, I clicked on the embed characters button. In there, I pasted all the special characters I would need and clicked okay. Shouldn't this be enough for the text to display properly? What am I missing? Please help...

More info: I'm noticing that in the actual dynamic text field in my .FLA file, if I type a foreign character like é, it pops up as a block. My family font is set to New Caledonia... is it possible that New Caledonia doesn't have those particular glyphs? The thing that doesn't make sense to me though is, last year when I made this card, it worked fine with New Caledonia... Any help is greatly appreciated!!

Text message alert- turn off or modify

In spite of some other comments on this topic, it is not easy to find how to modify the text message alert in the E71 manual. I have been awakened several times by amber alerts during the night. When I tried to find how to turn off the message alert in the manual, I could not find it. I emailed Nokia and the following (modified a little) is what I received:
To turn off or change text message alert tone:
In response to your concern, we would like to inform you that you can change the message alert tone of your device.
Please refer below for the steps:
1. Select Menu
2. Select Tools
3. Select Profiles and to change the message tone
4. Select current profile if not already selected
5. Select Options
5. Select Personalise
6. Select Message alert tone (page to off or vibrate if preferred)
Problem solved! I hope this helps some of you having the same problem.

I think this is what you are looking for.
http://www.wireless.att.com/cell-phone-service/services/services-list.jsp?catId= cat320008&LOSGId=&catName=Parental+Controls

Text message alert sound

I have a new LG Revere. When I receive a text message, the phone makes some sort of alert vocal sound. I can set the text message alert ring tone, but how do I turn off that alert vocal sound?

This question, and another regarding a "voice" or "vocal" alert, leads me to believe you have Voice commands enabled. I'm not sure where this is on the Menu system for the Revere - explore Menu, Tools, Sounds, Voice Commands, Alerts - see if there is a setting for those to be toggled on or off. You may also look in your user manual for those keywords to see if there is anything there that will lead to a way to turn these off.
** Update - Page 65 of the user manual has info on the Voice Commands and turning the prompts to Readout/Readout + Alerts/Tones only I think you want tones only....
http://cache.vzw.com/multimedia/mim/lg_revere/revere.pdf

EDGE and HTML dynamic text in a "box" with scroll bar

I'm new to EDGE, a win7pro master collection cs5.5 suite owner. I'm mainly in the Film/Video post production field (mostly AE, PPro, Pshop, IA) but have been branching into web design the last couple of years. I use Dreamweaver, Fireworks, Flash. While I'm a expert user with all the Film/video apps, I would say I only have intermediate ability with the web apps. While I understand a lot of programing logic bulding blocks I'm not a coder.
So since we're told "flash is dead", my interest in Edge is to try to do some of the things that I can currently do in flash in EDGE. I was excited when Edge first came out but lost interest when it became obvious that Adobe was not going to offer Edge and Muse to "suite owners" but only in their force feeding of the "Cloud". Better known as the "golden goose" for adobe stockholders and a never ending perpetual hole in the pocket for users. Anyway....
I spent the last couple of days doing some of the tuts and messing with the UI. It's matured a lot since I was here last.
I've been working on a flash site for a sports team where one of the pages is a player profile page where college recuriters and other interested parties can view recuriting relavent info/stats about players. This is how it works. While on the "Team" page a users clicks on a button labled "Player Profiles" . (Animation) A "page" flies in and unfurls from the upper right corner (3d page flips effect created in AE played by flash as a frame SEQ). Once it lands filling most of the center of the screen there is a bright flash. As the brightness fades we see the "page" is a bordered box with a BG image of a ball field(End). (Animation) from behind the border in fly small pictures (player head shots with name and jersey number). They stream in and form a circle like a wagon train and the team logo zooms up from infinity to the center of the circle(End). As the user mouses over a player's pic it zooms up a little and gets brighter (like mouseover image nav thumbs for a image slider). If the user clicks on a player's head shot it flips over and scales up to become a text box with a scrollbar. The content of the box is a mix of images, static and dynamic text fields populated from data in an "player info data base" XML file, and some hyperlinks. It's all kept updated dynamicaly with current stats, info and images from the XML file. There is also a "PDF" button that allows the user to open/save/print a PDF of the player's profile (the PDF's are static files for now but the choice of which pdf to retrive is dynamicaly supplied via the XML file.
So.... Is Edge now able to do something like this? Would it need to be a collection of small animations? could these be "assembled" and connected as an asset in dreamweaver ?
I thought I would approach this from the end (ie click on an image and display a box with dynamic TEXT fileds. ) since that is the most important part, ie displaying the dynamicaly updated profile info. Sooooo....
Can Edge display a scrolling text box with Images, static text, and html dynamic text in it??
Joel

The code is in composition ready. Click the filled {}

How to use same dynamic text, multiple times in a Movie

FLASH CS5.5
How can a dynamic text field be used multiple times, on any
frame, in any new layer during a Movie?
~~
A number of unique dynamic text fields are being used.
The intent is to use them each, many times during a Movie.
(i.e. a users first name)
They are successfully being "ExternalInterfaced" from a PDF form field.
(the SWF is displayed within the PDF as a RMA)
This all works well, IF I only use one instance of the dynamic text field.
(one use of each unique text field)
If I try and use that same dynamic text field, again, in a new layer, later in the SWF,
all of that said, duplicate dynamic text fields do not display.
~~
Stumped!!!
Thanks in advance for your advice / comments!
D-

Thanks Ned,
I always welcome learning something new.
I did not know creating a new keyframe,
creates a new instance.
Yes, I had used the same dynamic text field instance name in
numerous, new layers (great observation).
With the objective to display the User's name throughout
the timeline (on and off)...
I'll attempt to paraphrase your solution;
Use a single layer to display the dynamic text field.
Extend this layer's timeline throughout the movie, or end use of the dynamic text field.
Help with this one ??
Set the visible properties to true or false as need through out the timeline.
( Does require an AS3 ? )
I'll give that a try.....
~~
Side of effect of using the above solution;
The SWF in it's attempted state, uses the dynamic text field instance, in
different places, different text sizes, on the stage, throughout the Movie.
(i.e. the User's first name appears in different sentences...)
Per the solution above,
I believe I will be limited to One location, one format setting.
Is this assumption correct?
I can make this work from a display / Movie point of view.
However, your first VAR concept, noted above, might be
worth exploring should more flexibility be required.
Thanks for making the time to coach...
D-

How do I make dynamic text look static while the HMTL tagging is enabled?

Hi all,
I am using flash 8 with AS 2.0.
I have a dynamic text field where I am setting it's text value through a variable. Now, I need this dynamic text field content to look like static font on runtime. I tried embedding the text field but that makes my file so heavy and most importantly, it disables the HTML tagging on the text field.
Please suggest me on how to make a dynamic text field content look static on runtime while the HTML tagging is enabled and working fine.
Thanks.

I am sorry. But the attachment was not intended for what you
thought my friend.
It was there so that there are no confusions for what I mean by look of dynamic and static text fields.

Dynamic text in ALERTS

Similar Messages

Maybe you are looking for