Dynamic Tree and TreeNode Issue
I am using JSC2 (060120) on Win2K pro, exporting the WAR and running in JBoss 4.0.3 running under JDK 1.5.0_04.
I am trying to dynamically build a tree as the user clicks on nodes and am not having success following the example at http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/sitemaptree.html
When I attempt to add the child nodes directly to nodes via clickedNode.getChildren().add(myNewNode); I get an error as follows:
10:17:29,260 ERROR [[jsp]] Servlet.service() for servlet jsp threw exception
javax.faces.el.ReferenceSyntaxException: AP-1030Child.id
at com.sun.faces.application.ApplicationImpl.checkSyntax(ApplicationImpl.java:749)
at com.sun.faces.application.ApplicationImpl.createValueBinding(ApplicationImpl.java:291)
The ID shown AP-1030Child.id does not exist, my to be parent node is named AP-1030 and my to be child is named AP-1030-Bottom.
The only way I can get the Tree to build properly is to add the to be child (AP-1030-Bottom) to the Tree itself and then assign it's parent as the node (AP-1030). But, the problem I run into then is the next time the parent node (AP-1030) is clicked parent.getChildCount() or parent.getChildren().size() both evaluate to zero and I attempt to build the children for the node at which point the code blows up due to duplicate naming.
Has anyone else experienced this? Am I doing something wrong?
Here is the code I use to build my tree initially on the SessionBean...
for(int i = 0; i < count; i++)
TreeNode newNode = new TreeNode();
newNode.setId("AP-" + pages.pageId);
newNode.setText(pages[i].page);
newNode.setImageURL("/resources/tree_document.gif");
MethodBinding nodeMethodBinding = this.getApplication().createMethodBinding("#{MainPage.treeNode_action}", null);
newNode.setAction(nodeMethodBinding);
this.applicationPagesTree.getChildren().add(newNode);
Here is the code I am using to add the child nodes to the clicked node...
for(int l = 0; l < locationsCount; l++) {
TreeNode locationNode = new TreeNode();
String sectionText = "";
(populate sectionText with Top|Left|Center|Right|Bottom based on data)
locationNode.setText(sectionText);
// making unique name for this object in the tree: parentname + section
locationNode.setId(searchID + "-" + sectionText);
locationNode.setImageURL("/resources/tree_document.gif");
// bind to method for the page sections click
MethodBinding nodeMethodBinding = this.getApplication().createMethodBinding("#{MainPage.locationNode_action}", null); locationNode.setAction(nodeMethodBinding);
// adding to the base tree object after the parent (why can I just not add to the node?)
this.treeList.getChildren().add(insertIndex + l, locationNode);
// this nudges the node over one, otherwise it is peer to the parent (again, why not just add to the parent?)
locationNode.setParent(node);
Why is it I can get the String ID from the tree and not the object? Wouldn't it make sense to give me the TreeNode instead of it's ID when calling getCookieSelectedTreeNode()? This would seem a more proper object orientated approach.
Any help appreciated, thanks.
Thanks,
I have tried pretty much that exact same code and it does not work for some reason. That code is the same as the example I showed that I followed originally.
The only way I can get it to work is as I showed. When I do the node creation and then add to the node in the tree it blows up while rendering with the message from the original post.
Similar Messages
-
Major tree and display issue.........
Hi guys! I am having a problem whereby when I click on a tree node(Folder), I want all the images contained in that folder to be displayed on a JPanel which I created. By the way, the tree and panel are added to a splitpane. Tree on the right, and panel on the left. I will really appreciate it if someone can assist. Thanks a lot in advance!!
Cheers,
BoloHi,
You see this demo, it displays all the images of a selected folder in the tree in the right panel. You can customize the layout of the right panel to suit your need.
Regards,
Pratap
import java.awt.*;
import java.io.*;
import javax.swing.*;
import javax.swing.event.*;
import javax.swing.filechooser.*;
import javax.swing.tree.*;
public class Frame1 extends JFrame implements TreeSelectionListener {
JSplitPane jSplitPane1 = new JSplitPane();
JScrollPane jScrollPane1 = new JScrollPane();
JScrollPane jScrollPane2 = new JScrollPane();
JTree tree = new JTree();
JPanel panel = new JPanel();
String dir = "d://images/";
private static final FileSystemView fsv = FileSystemView.getFileSystemView();
FlowLayout flowLayout1 = new FlowLayout();
public Frame1() {
try {
jbInit();
tree.setModel(new FileTreeModel(dir));
tree.setCellRenderer(new FileCellRenderer());
tree.addTreeSelectionListener(this);
catch(Exception e) {
e.printStackTrace();
public void valueChanged(TreeSelectionEvent e) {
panel.removeAll();
if (e.getNewLeadSelectionPath() == null){
panel.repaint();
return;
File node = (File)e.getNewLeadSelectionPath().getLastPathComponent();
if (node.isFile()) {
panel.repaint();
return;
File []images = node.listFiles();
try {
for (int i = 0; i < images.length; i++) {
String name = images.getName();
boolean image = name.endsWith(".gif") || name.endsWith(".jpg") || name.endsWith(".png");
if (!image) continue;
ImageIcon icon = new ImageIcon(images[i].toURL());
panel.add(new JLabel(icon));
panel.revalidate();
catch (Exception ex) {
ex.printStackTrace();
public static void main(String[] args) {
Frame1 f = new Frame1();
f.setSize(400,300);
f.setLocation(200,200);
f.show();
private void jbInit() throws Exception {
panel.setBackground(Color.white);
panel.setLayout(flowLayout1);
flowLayout1.setAlignment(FlowLayout.LEFT);
this.getContentPane().add(jSplitPane1, BorderLayout.CENTER);
jSplitPane1.add(jScrollPane1, JSplitPane.LEFT);
jScrollPane1.getViewport().add(tree, null);
jSplitPane1.add(jScrollPane2, JSplitPane.RIGHT);
jScrollPane2.getViewport().add(panel, null);
public class FileTreeModel extends DefaultTreeModel {
File root;
FileTreeModel(String dir) {
super(null);
root = new File(dir);
public Object getChild(Object parent, int index){
File p = (File)parent;
return p.listFiles()[index];
public int getChildCount(Object parent) {
File p = (File)parent;
return p.listFiles().length;
public int getIndexOfChild(Object parent, Object child) {
File f [] = ((File)parent).listFiles();
for (int i = 0; i < f.length; i++) {
if (f[i] == child) return i;
return 0;
public Object getRoot() {
return root;
public boolean isLeaf(Object node){
return ((File)node).isFile();
public class FileCellRenderer extends DefaultTreeCellRenderer {
public Component getTreeCellRendererComponent(JTree tree,
Object value,
boolean selected,
boolean expanded,
boolean leaf,
int row,
boolean hasFocus) {
super.getTreeCellRendererComponent(tree, value,selected, expanded, leaf, row, hasFocus);
File f = (File)value;
setIcon(fsv.getSystemIcon(f));
setText(f.getName());
return this; -
Dynamic Structure and Components Issue
Hi,
I have a requirement of creating an inbound idoc program and populating dynamic structures. The program for the dynamic structure creation is as follows: ( I have been referencing Heilmans Blog ): The part for the inbound idoc creation works fine. The data will come in a flat file with Table name and 15 characterstcis. The table name is known at runtime. I need to create the dynamic table, find out the components and then populate the custom table with the dynamically created structures.
Custom table: 4 components
Internal table from file: 15 components with value.
There could be more than one table in the flat file and not all components or char in the flat file is mapped to the table.
I have been able to code the part where the components in the structure and the file components are in the same order. The problem is if the components in the structure and the file components are not in the same order. I would appreciate some inputs in this issue.
The part that has to be worked out is:
IF NOT L_TABNAME IS INITIAL.
perform get_structure.
perform create_dynamic_itab.
perform get_data.
ENDIF.
*& Report /FACTGLB/GTDMI_VARTAB_IDOCS02 *
PROGRAM DESCRIPTION: Variant Table and Content Upload Interface.
DEVELOPER: Aveek Ghose
CREATION DATE: 2008-07-02
RDD NUMBER: DCDD027
TRANSPORT NUMBER(S): RD2K902769
*-- REVISION HISTORY -
DEVELOPER:
DATE APPLIED: YYYY-MM-DD
SCR NUMBER: <Scope Change Request ID>
RDD NUMBER: <Toolset Object ID>
TRANSPORT NUMBER(S):
DESCRIPTION:
REPORT ZGTDMI_VARTAB_IDOCS_DYNAMIC
NO STANDARD PAGE HEADING
LINE-SIZE 150
LINE-COUNT 55
MESSAGE-ID zfactglb.
**Include for Global Data Declaration
*INCLUDE /FACTGLB/GTDMI_VARTAB_TOP02.
**Include for Selection Screen
*INCLUDE /FACTGLB/GTDMI_VARTAB_SEL02.
**Include for Sub Routines
*INCLUDE /FACTGLB/GTDMI_VARTAB_FORMS02.
*& Include /FACTGLB/GTDMI_VARTAB_TOP02 *
*& Include /FACTGLB/GTDMI_VARTAB_TOP02 *
*& Include /FACTGLB/GTDMI_VARTAB_TOP
*& Include /FACTGLB/GTDMI_VARTAB_TOP
PROGRAM DESCRIPTION: Variant Table and Content Upload Interface.
DEVELOPER: Aveek Ghose
CREATION DATE: 2008-07-02
RDD NUMBER: DCDD027
TRANSPORT NUMBER(S): RD2K902769
*-- REVISION HISTORY -
DEVELOPER:
DATE APPLIED: YYYY-MM-DD
SCR NUMBER: <Scope Change Request ID>
RDD NUMBER: <Toolset Object ID>
TRANSPORT NUMBER(S):
DESCRIPTION:
TYPE POOLS
*Type declaration for ALV display
TYPE-POOLS : slis.
Include .
type-pools: col, "#EC *
icon, "#EC *
sym, "#EC *
abap. "#EC *
Target structure definitions
tables:
E1CUVTM, "#EC *
E1DATEM, "#EC *
E1CUV1M, "#EC *
edp21, "#EC *
edi_dc40, "#EC *
edi_dd40, "#EC *
edi_ds40. "#EC *
GLOBAL TYPES
TYPES : BEGIN OF ty_vartab.
include structure E1CUVTM.
TYPES: END OF ty_vartab.
TYPES : BEGIN OF ty_vartabdate.
INCLUDE STRUCTURE E1DATEM.
TYPES : END OF ty_vartabdate.
*Structure for data retreived
TYPES : BEGIN OF ty_vardetails.
INCLUDE STRUCTURE E1CUV1M.
TYPES : END OF ty_vardetails.
*Structure for data retreived from table tabinput.
TYPES : BEGIN OF ty_tabinput,
lines type string,
END OF ty_tabinput.
*Structure for data retreived from Table dsn_input.
TYPES : BEGIN OF ty_dsninput, "#EC *
LINE(101) type c,
END OF ty_dsninput.
*Structure for data retreived from Table dsn_input.
TYPES : BEGIN OF ty_newinput, "#EC *
LINE(101) type c,
flag(1) type c,
END OF ty_newinput.
*Structure for keeping the values of all the custom tables
TYPES : BEGIN OF ty_custom_tabs,
matnr TYPE matnr, "Material Number
werks TYPE werks_d, "Plant
lgort TYPE lgort_d, "Storage Location
qunty TYPE P DECIMALS 2, "Standard Order Quantity
det_loc TYPE CHAR6, "Detail Location
class TYPE CHAR2, "Class
rate TYPE P DECIMALS 2, "Rate
END OF ty_custom_tabs.
*Type declared for the internal table and work area which will store
*fields for error log
TYPES : BEGIN OF ty_error_log,
matnr TYPE matnr, "Material Number
mtart TYPE mtart, "Material Type
sel_data TYPE char10, "No of selectyed data
END OF ty_error_log.
*Structure for keeping the output data
TYPES : BEGIN OF ty_final,
VTNAM(018) type C,
CHAR1(030) type C,
CHAR2(030) type C,
CHAR3(030) type C,
CHAR4(030) type C,
CHAR5(030) type C,
CHAR6(030) type C,
CHAR7(030) type C,
CHAR8(030) type C,
CHAR9(030) type C,
CHAR10(030) type C,
CHAR11(030) type C,
CHAR12(030) type C,
CHAR13(030) type C,
CHAR14(030) type C,
CHAR15(030) type C,
FLAG(001) type C,
END OF ty_final.
TYPES: begin of TY_CONTENTHD,
VTNAM(018) type C,
FLAG(001) type C,
end of TY_CONTENTHD.
TYPES: begin of TY_CONTENT,
VTNAM(018) type C,
CHAR1(030) type C,
CHAR2(030) type C,
CHAR3(030) type C,
CHAR4(030) type C,
CHAR5(030) type C,
CHAR6(030) type C,
CHAR7(030) type C,
CHAR8(030) type C,
CHAR9(030) type C,
CHAR10(030) type C,
CHAR11(030) type C,
CHAR12(030) type C,
CHAR13(030) type C,
CHAR14(030) type C,
CHAR15(030) type C,
FLAG(001) type C,
Z_VARCOND TYPE VARCOND.
TYPES: end of TY_CONTENT.
TYPES: begin of TY_CONTENTTAB,
VTNAM(018) type C,
COMP1(30) TYPE C,
CHAR1(030) type C,
COMP2(30) TYPE C,
CHAR2(030) type C,
COMP3(30) TYPE C,
CHAR3(030) type C,
COMP4(30) TYPE C,
CHAR4(030) type C,
COMP5(30) TYPE C,
CHAR5(030) type C,
COMP6(30) TYPE C,
CHAR6(030) type C,
COMP7(30) TYPE C,
CHAR7(030) type C,
COMP8(30) TYPE C,
CHAR8(030) type C,
COMP9(30) TYPE C,
CHAR9(030) type C,
COMP10(30) TYPE C,
CHAR10(030) type C,
COMP11(30) TYPE C,
CHAR11(030) type C,
COMP12(30) TYPE C,
CHAR12(030) type C,
COMP13(30) TYPE C,
CHAR13(030) type C,
COMP14(30) TYPE C,
CHAR14(030) type C,
COMP15(30) TYPE C,
CHAR15(030) type C,
FLAG(001) type C.
TYPES: end of TY_CONTENTTAB.
TYPES: BEGIN OF TY_E1CUVTM,
MSGFN TYPE MSGFN,
VAR_TAB TYPE APITABL,
STATUS TYPE RCUTBST,
VTGROUP TYPE RCUTBGR,
AUTHSTRUC TYPE RCUTBBE,
AUTHENTRY TYPE RCUFNBI,
FLDELETE TYPE FLLKENZ,
DBTABNAME TYPE TABNAME16,
DBCONACTIVE TYPE DBCON_ACTI,
PRESDEC TYPE VTDCT,
END OF TY_E1CUVTM.
TYPES: BEGIN OF TY_E1CUV1M,
MSGFN TYPE MSGFN,
VTLINENO TYPE VTLINENO,
VTCHARACT TYPE ATNAM,
ATWRT TYPE ATWRT,
ATFLV TYPE ATFLV,
ATAWE TYPE MSEHI,
ATFLB TYPE ATFLB,
ATAW1 TYPE MSEHI,
ATCOD TYPE ATCOD,
ATTLV TYPE ATTLV,
ATTLB TYPE ATTLB,
ATPRZ TYPE ATPRZ,
ATINC TYPE ATINC,
VTLINENO5 TYPE VTLINENO5,
END OF TY_E1CUV1M.
TYPES: BEGIN OF TY_E1DATEM,
MSGFN TYPE MSGFN,
KEY_DATE TYPE SYDATUM,
AENNR TYPE AENNR,
EFFECTIVITY TYPE CC_MTEFF,
END OF TY_E1DATEM.
TYPES: BEGIN OF ty_vtnam,
vtint TYPE vtint, " Internal number of variant table
vtnam TYPE vtnam, " Name of variant table
dbtab_name type tabname16, "Custom table Name
error TYPE char1, " Indicates error in data format
reas TYPE char50, " Reason for failure
END OF ty_vtnam.
Get data type for characteristic
TYPES: BEGIN OF ty_cabn,
atinn TYPE atinn, "Internal characteristic
atnam TYPE atnam, "Characteristic Name
atfor TYPE atfor, "Data type of characteristic
atson TYPE atson, "Indicator: Additional Values
atprt TYPE atprt, "Check table
atprr TYPE atprr, "Name of Check Report Program
atprf TYPE atprf, "Function Module for Checking Values
anzdz TYPE anzdz, "Number of Decimal Places
check TYPE char1, "Indicates check required or not
END OF ty_cabn.
Get field names of variant table
TYPES: BEGIN OF ty_cuvtab_fld,
vtint TYPE vtint, " Internal number of variant table
atinn TYPE atinn, " Internal characteristic
vtpos TYPE vtpos, " Item number of characteristic in variant
*mod-012
DBFLD type NAME_FELD,
*mod-012
exist TYPE char1, " X Indictaes characteristic is part of fil
END OF ty_cuvtab_fld.
Store all data in internal table
TYPES: BEGIN OF ty_file,
vtnam TYPE vtnam,
char1 TYPE atwrt,
char2 TYPE atwrt,
char3 TYPE atwrt,
char4 TYPE atwrt,
char5 TYPE atwrt,
char6 TYPE atwrt,
char7 TYPE atwrt,
char8 TYPE atwrt,
char9 TYPE atwrt,
char10 TYPE atwrt,
char11 TYPE atwrt,
char12 TYPE atwrt,
char13 TYPE atwrt,
char14 TYPE atwrt,
char15 TYPE atwrt,
flag TYPE char1,
error TYPE char50,
END OF ty_file.
To check for duplicates
TYPES: BEGIN OF ty_dupl,
vtnam TYPE vtnam,
char1 TYPE atwrt,
char2 TYPE atwrt,
char3 TYPE atwrt,
char4 TYPE atwrt,
char5 TYPE atwrt,
char6 TYPE atwrt,
char7 TYPE atwrt,
char8 TYPE atwrt,
char9 TYPE atwrt,
char10 TYPE atwrt,
char11 TYPE atwrt,
char12 TYPE atwrt,
char13 TYPE atwrt,
char14 TYPE atwrt,
char15 TYPE atwrt,
slnid TYPE slnid,
END OF ty_dupl.
Get previously loaded characteristic values for internal table (CHAR)
TYPES: BEGIN OF ty_cuvtab_valc,
vtint TYPE vtint, " Internal number of variant table
slnid TYPE slnid, " Key for value combination in variant tab
atinn TYPE atinn, " Internal characteristic
valc TYPE atwrt, " Characteristic Value
END OF ty_cuvtab_valc.
Get previously loaded characteristic values for internal table (NUM)
TYPES: BEGIN OF ty_cuvtab_valn,
vtint TYPE vtint, " Internal number of variant table
slnid TYPE slnid, " Key for value combination in variant tab
atinn TYPE atinn, " Internal characteristic
val_from TYPE atflv, " Internal floating point from
END OF ty_cuvtab_valn.
Store column positions of characteristics
TYPES: BEGIN OF ty_col_pos,
vtint TYPE vtint, " Internal number of variant table
vtnam TYPE vtnam, " Variant table name
atinn TYPE atinn, "Internal characteristic
atnam TYPE atnam, "Characteristic Name
field TYPE fieldname, "Field name
req TYPE char1, " Required or not
vtpos TYPE vtpos, " Item number of characteristics
DBFLD type NAME_FELD, " Field Name of Custom table.
END OF ty_col_pos.
Store valid values for characteristics
TYPES: BEGIN OF ty_cawn,
atinn TYPE atinn, " Internal characteristic
atzhl TYPE atzhl, " Int counter
atwrt TYPE atwrt, " Characteristic Value
atflv TYPE atflv, " Internal floating point from
lkenz TYPE lkenz, " Deletion indicator
END OF ty_cawn.
Store error messages for individual lines
TYPES: BEGIN OF ty_error,
vtnam TYPE vtnam, " Variant table name
fname TYPE fieldname, " Fieldname
atnam TYPE atnam, " Characteristic name
atwrt TYPE atwrt, " Characteristic value
row TYPE char5, " Row id
END OF ty_error.
Begin TPR# 4618
To store unique number for variant
TYPES: BEGIN OF ty_vnt_ma,
vtnam TYPE vtnam,
unique_no TYPE ZGTDM_UNQN,
no_chr TYPE ZGTDM_NO_CHR,
END OF ty_vnt_ma.
TYPES: BEGIN OF ty_dbtab,
vtint TYPE vtint,
vtnam TYPE vtnam,
DBTAB_NAME TYPE TABNAME16,
END OF ty_dbtab.
To find out concatenated number for
TYPES: BEGIN OF ty_split,
f1 TYPE char6,
END OF ty_split.
TYPES: BEGIN OF ty_charval,
char TYPE char30,
END OF ty_charval.
TYPES: BEGIN OF TY_DATA,
name TYPE string,
value(15) type c,
END OF TY_DATA.
DATA: I_DATATAB TYPE STANDARD TABLE OF TY_DATA.
TYPES:
TUMLS_MESSTYPE type /SAPDMC/LS_MESSTYPE,
TUMLS_MESSTYPETXT type EDI_TEXT60,
TUMLS_MESSCODE type EDIPMESCOD.
TYPES:
TUMLS_TABNAME TYPE TABNAME, "#EC *
TUMLS_SEGMENT TYPE TABNAME. "#EC *
TYPES:
TUMLS_PATHFILE TYPE /SAPDMC/LS_FILENAME,
TUMLS_FILENAME TYPE /SAPDMC/LS_FILENAME,
TUMLS_FILETEXT TYPE /SAPDMC/LS_FILETEXT.
TYPES:
BEGIN OF type_errorline,
msgty type SYMSGTY,
id type SYMSGID,
msgno type symsgno,
par1 type symsgv,
par2 type symsgv,
par3 type symsgv,
par4 type symsgv,
END OF type_errorline.
TYPES:
type_errortab TYPE SORTED TABLE
OF type_errorline
WITH NON-UNIQUE KEY id msgno par1 par2 par3 par4.
DATA:
LV_INDEX TYPE SY-INDEX,
LV_INDEX2 TYPE SYINDEX,
LV_TABLE1 TYPE REF TO DATA,
LV_TABLE2 TYPE REF TO DATA,
LV_TABLE3 TYPE REF TO DATA,
LV_TABLE4 TYPE REF TO DATA,
LV_LINE1 TYPE REF TO DATA,
LV_LINE2 TYPE REF TO DATA,
LV_LINE3 TYPE REF TO DATA,
LV_LINE4 TYPE REF TO DATA,
LV_OFFSET1 TYPE SYTABIX,
ST_IS_LAYOUT_ALV TYPE SLIS_LAYOUT_ALV,
L_IT_FCATLOG_ALV TYPE SLIS_T_FIELDCAT_ALV,
L_IT_FLDCAT TYPE LVC_T_FCAT.
GLOBAL INTERNAL TABLES
DATA : i_newinput TYPE STANDARD TABLE OF ty_newinput INITIAL SIZE 0."#EC *
DATA : i_contentheader1 TYPE STANDARD TABLE OF ty_contenthd INITIAL SIZE 0."#EC *
DATA : i_contenttab1 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab2 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab3 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab4 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab5 TYPE STANDARD TABLE OF ty_contenttab INITIAL SIZE 0."#EC *
DATA : i_E1CUV1M TYPE STANDARD TABLE OF E1CUV1M INITIAL SIZE 0."#EC *
DATA : i_errortab TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
GLOBAL WORK AREAS
**Internal Table for the structure TY_T001L
DATA : wa_vartab TYPE ty_vartab. "#EC *
DATA : wa_vartabdate TYPE ty_vartabdate. "#EC *
DATA : wa_vardetails TYPE ty_vardetails. "#EC *
DATA : wa_tabinput TYPE ty_tabinput. "#EC *
DATA : wa_dsninput TYPE ty_dsninput. "#EC *
DATA : wa_newinput TYPE ty_newinput. "#EC *
DATA : wa_gnewinput TYPE ty_newinput. "#EC *
DATA : wa_ginput_data TYPE ty_newinput. "#EC *
DATA : wa_final TYPE ty_final. "#EC *
DATA : wa_content TYPE ty_content. "#EC *
DATA : wa_contenthd TYPE ty_contenthd. "#EC *
DATA : wa_contentheader type ty_contenthd. "#EC *
DATA : wa_contenttab TYPE ty_content. "#EC *
DATA : wa_content1 TYPE ty_content. "#EC *
DATA : wa_contenthd1 TYPE ty_contenthd. "#EC *
DATA : wa_contentheader1 type ty_contenthd. "#EC *
DATA : wa_contenttab1 TYPE ty_content. "#EC *
DATA : wa_contenttab2 TYPE ty_content. "#EC *'
DATA : wa_contenttab3 TYPE ty_content. "#EC *
DATA : wa_contenttab4 TYPE ty_content. "#EC *
DATA : wa_contenttab5 TYPE ty_contentTAB. "#EC *
DATA : wa_E1CUVTM TYPE E1CUVTM. "#EC *
DATA : wa_E1CUV1M TYPE E1CUV1M. "#EC *
DATA : wa_E1DATEM TYPE E1DATEM. "#EC *
DATA : wa_error_tab TYPE solisti1. "#EC *
INTERNAL TABLES AND WORK AREAS FOR BDC
*Internal Table to store the data to display the error message
DATA : i_errormsg TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
*Internal Table to store the data to display the error message
DATA : i_error TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
DATA : itab_error TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
**Work area to store the data to display the error message
DATA : wa_errormsg TYPE solisti1. "#EC *
**Internal table which will store data for the error log
DATA:i_error_log TYPE STANDARD TABLE OF ty_error_log INITIAL SIZE 0."#EC *
GLOBAL VARIABLES
DATA: G_FILE TYPE string. "#EC *
DATA : g_ctr_input_recs(5) type c. "#EC *
DATA: g_ctr_output_recs(5) type p. "#EC *
data : g_msg(100) type c. "#EC *
data: g_struct_file TYPE string. "#EC *
data: g_login type FILEINTERN. "#EC *
data: g_phyin type string. "#EC *
DATA: g_lprnt type RSPOPSHORT. "#EC *
DATA: g_FNAME1 TYPE STRING. "#EC *
DATA : g_repid TYPE repid, "#EC *
g_exit(1) TYPE C, "#EC *
gx_variant type disvariant. "#EC *
DATA : g_lines TYPE i . "#EC *
data : g_save(1) type c. "#EC *
DATA : g_splid TYPE rspoid . "#EC *
data: p_login type FILEINTERN. "#EC *
data: p_phyin type string. "#EC *
DATA:
go_table TYPE REF TO cl_salv_table,
go_sdescr TYPE REF TO cl_abap_structdescr,
go_tdescr TYPE REF TO cl_abap_tabledescr,
gdo_data TYPE REF TO data,
gdo_handle TYPE REF TO data,
gs_comp TYPE abap_componentdescr,
gt_components TYPE abap_component_tab.
FIELD-SYMBOLS:
TYPE table.
GLOBAL CONSTANTS
CONSTANTS c_msgar TYPE rslgarea VALUE 'F8'. "#EC *
CONSTANTS c_msgid TYPE rslgsubid VALUE 'E'. "#EC *
CONSTANTS c_urgnc TYPE char04 VALUE 'HIGH'. "#EC *
CONSTANTS C_X(1) TYPE C VALUE 'X'. "#EC *
CONSTANTS C_Y(1) TYPE C VALUE 'Y'. "#EC *
CONSTANTS C_Z(1) TYPE C VALUE 'Z'. "#EC *
CONSTANTS C_E(1) TYPE C VALUE 'E'. "#EC *
CONSTANTS C_SAP(3) TYPE C VALUE 'SAP'. "#EC *
CONSTANTS C_MOD(3) TYPE C VALUE 'MOD'. "#EC *
CONSTANTS C_MD1(3) TYPE C VALUE 'MD1'. "#EC *
CONSTANTS C_MD2(3) TYPE C VALUE 'MD2'. "#EC *
CONSTANTS C_MD3(3) TYPE C VALUE 'MD3'. "#EC *
CONSTANTS C_MD4(3) TYPE C VALUE 'MD4'. "#EC *
CONSTANTS C_MD5(3) TYPE C VALUE 'MD5'. "#EC *
constants: c_000001(6) type c value '000001', "#EC *
c_e1cuv1m(7) type c value 'E1CUV1M', "#EC *
c_02(2) type c value '02', "#EC *
c_009(3) type c value '009', "#EC *
c_0001(4) type c value '0001'. "#EC *
constants: c_e1datem(7) type c value 'E1DATEM'. "#EC *
constants: c_e1cuvtm(7) type c value 'E1CUVTM'. "#EC *
GLOBAL INTERNAL TABLES FOR ALV DISPLAY
*Internal tables for ALV Field cat
DATA :
i_fieldcat_ov TYPE STANDARD TABLE OF slis_fieldcat_alv INITIAL SIZE 0,"#EC *
i_fieldcat_dtl TYPE STANDARD TABLE OF slis_fieldcat_alv INITIAL SIZE 0,"#EC *
i_fieldcat_ov1 TYPE lvc_t_fcat, "#EC *
i_events TYPE slis_t_event. "#EC *
GLOBAL WORK AREAS FOR ALV DISPLAY
*Work area for ALV Field layout
DATA : wa_layout TYPE slis_layout_alv. "#EC *
*Work area for Field Cat. Table
DATA : wa_fieldcat TYPE slis_fieldcat_alv. "#EC *
GLOBAL VARIABLES FOR ALV DISPLAY
DATA : g_event TYPE slis_t_event. "#EC *
DATA : g_top_of_page TYPE slis_t_listheader. "#EC *
DATA : g_ok_code TYPE char4. "#EC *
DATA : g_variant type disvariant. "#EC *
GLOBAL CONSTANTS FOR ALV DISPLAY
BAL handling
data: iv_log_handle type BALLOGHNDL. "#EC *
data: is_log_header type bal_s_log. "#EC *
data: iv_object type bal_s_log-object value 'CAPI'. "#EC *
data: iv_subobject type bal_s_log-subobject value 'CAPI_LOG'."#EC *
data: iv_tcode type bal_s_log-altcode value 'SE38'. "#EC *
*MOD-005
RANGES:
R_MESTYP FOR EDIDC-MESTYP, "#EC *
R_CREDAT FOR EDIDC-CREDAT, "#EC *
R_CRETIM FOR EDIDC-CRETIM, "#EC *
R_SNDPRT FOR EDIDC-SNDPRT, "#EC *
R_SNDPRN FOR EDIDC-SNDPRN. "#EC *
DATA:
L_MESSTYPE TYPE TUMLS_MESSTYPE. "#EC *
*MOD-005
data: p_sndprn TYPE EDI_SNDPRN, "#EC *
p_sndprt TYPE EDI_SNDPRT, "#EC *
p_sndpor TYPE EDI_SNDPOR. "#EC *
data: p_rcvprn TYPE EDI_RCVPRN, "#EC *
p_rcvprt TYPE EDI_RCVPRT, "#EC *
p_rcvpor TYPE EDI_RCVPOR. "#EC *
data:
init_E1CUVTM type E1CUVTM, "#EC *
prev_E1CUVTM type E1CUVTM, "#EC *
init_E1DATEM type E1DATEM, "#EC *
prev_E1DATEM type E1DATEM, "#EC *
init_E1CUV1M type E1CUV1M, "#EC *
prev_E1CUV1M type E1CUV1M. "#EC *
Source structure definitions
data:
begin of LSMW_TAB_CONTENT, "#EC *
VTNAM(018) type C,
CHAR1(030) type C,
CHAR2(030) type C,
CHAR3(030) type C,
CHAR4(030) type C,
CHAR5(030) type C,
CHAR6(030) type C,
CHAR7(030) type C,
CHAR8(030) type C,
CHAR9(030) type C,
CHAR10(030) type C,
CHAR11(030) type C,
CHAR12(030) type C,
CHAR13(030) type C,
CHAR14(030) type C,
CHAR15(030) type C,
FLAG(001) type C,
end of LSMW_TAB_CONTENT.
Counters
data:
g_cnt_VAR_TAB type i, "#EC *
g_cnt_TAB_CONTENT type i. "#EC *
Counter ct_xxxxxxxxxx: number of transferred records
data:
ct_edi_dc40 type i, "#EC *
cs_edi_dc40 type i, "#EC *
ct_E1CUVTM type i, "#EC *
cs_E1CUVTM type i, "#EC *
ct_E1DATEM type i, "#EC *
cs_E1DATEM type i, "#EC *
ct_E1CUV1M type i, "#EC *
cs_E1CUV1M type i. "#EC *
Global data definitions and data declarations
DATA: wa_cabn TYPE ty_cabn,
wa_cawn TYPE ty_cawn,
wa_file TYPE ty_file,
wa_vtnam TYPE ty_vtnam,
wa_cuvtab_fld TYPE ty_cuvtab_fld,
wa_cuvtab_valn TYPE ty_cuvtab_valn,
wa_cuvtab_valc TYPE ty_cuvtab_valc,
wa_col_pos TYPE ty_col_pos,
wa_error TYPE ty_error,
wa_dupl TYPE ty_dupl,
wa_dupl_file TYPE ty_dupl.
DATA: wa_vnt_ma TYPE ty_vnt_ma,
wa_split TYPE ty_split.
DATA: wa_charval TYPE ty_charval. "#EC *
Internal table
DATA: i_cabn TYPE STANDARD TABLE OF ty_cabn, "#EC *
i_cabn_temp TYPE STANDARD TABLE OF ty_cabn, "#EC *
i_cabn_atinn TYPE STANDARD TABLE OF ty_cabn, "#EC *
i_file TYPE STANDARD TABLE OF ty_file, "#EC *
i_file_tmp TYPE STANDARD TABLE OF ty_file, "#EC *
i_vtnam TYPE STANDARD TABLE OF ty_vtnam, "#EC *
i_cuvtab TYPE STANDARD TABLE OF ty_vtnam, "#EC *
i_cuvtab_fld TYPE STANDARD TABLE OF ty_cuvtab_fld, "#EC *
i_cuvtab_valn TYPE STANDARD TABLE OF ty_cuvtab_valn, "#EC *
i_cuvtab_valc TYPE STANDARD TABLE OF ty_cuvtab_valc, "#EC *
i_col_pos TYPE STANDARD TABLE OF ty_col_pos, "#EC *
i_cawn TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cawn_n TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cawn_c TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cawn_i TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cuv_error TYPE STANDARD TABLE OF ty_vtnam, "#EC *
i_dupl TYPE STANDARD TABLE OF ty_dupl, "#EC *
i_dbtab TYPE STANDARD TABLE OF ty_dbtab. "#EC *
DATA: i_vnt_ma TYPE STANDARD TABLE OF ty_vnt_ma, "#EC *
i_split TYPE STANDARD TABLE OF ty_split. "#EC *
DATA: i_dupl_file TYPE STANDARD TABLE OF ty_dupl. "#EC *
DATA: i_charval TYPE STANDARD TABLE OF ty_charval. "#EC *
Constants
CONSTANTS: c_char TYPE atfor VALUE 'CHAR', "#EC *
c_date TYPE atfor VALUE 'DATE', "#EC *
c_time TYPE atfor VALUE 'TIME', "#EC *
c_varcond TYPE atnam VALUE 'Z_VARCOND'. "#EC *
Field Symbols
FIELD-SYMBOLS: TYPE ANY.
Variables
DATA: g_raw(500) TYPE c, "#EC *
g_invalid TYPE char1, "#EC *
g_error TYPE char1, "#EC *
g_message TYPE char50, "#EC *
g_slnid_c TYPE slnid, "#EC *
g_slnid_n TYPE slnid, "#EC *
g_row TYPE char5. "#EC *
DATA: g_varcond TYPE varcond, "Variant condition "#EC NEEDED
g_split_var TYPE i. "#EC *
Types: begin of ty_charname,
name type atnam,
end of ty_charname.
data: wa_charname type ty_charname, "#EC *
i_charname type standard table of ty_charname. "#EC *
data: cnt_i type i, "#EC *
g_tabix type char10. "#EC *
Types: begin of ty_itab_zedidc40.
include structure edi_dc40.
TYPES: end of ty_itab_zedidc40.
Types: begin of ty_itab_zedidd40.
include structure edi_dd40.
TYPES: end of ty_itab_zedidd40.
DATA: itab_zedidc40 type standard table of
ty_itab_zedidc40 initial size 0. "#EC *
DATA: itab_zedidd40 type standard table of
ty_itab_zedidd40 initial size 0. "#EC *
DATA: wa_itab_zedidc40 type ty_itab_zedidc40.
DATA: wa_itab_zedidd40 type ty_itab_zedidd40.
*MOD-009
data: itab_ze1cuvtm type e1cuvtm, "#EC *
itab_ze1datem type e1datem, "#EC *
itab_ze1cuv1m type e1cuv1m. "#EC *
data: wdocnum(16) type n value 0. "#EC *
data: wsegnum(6) type n value 0. "#EC *
data: witemno(10) type n value 0. "#EC *
data: witemno_new(10) type n value 0. "#EC *
data: witemno_gst(10) type n value 0. "#EC *
data: witemno_qst(10) type n value 0. "#EC *
TYPES: BEGIN OF ty_input_data1, "#EC *
line(560) type c,
flag(1) type c,
END OF ty_input_data1.
DATA: i_input_data type standard table of
ty_input_data1 initial size 0. "with header line.
DATA: i_input_data1 type standard table of
ty_input_data1 initial size 0. "with header line.
DATA: wa_input_data type ty_input_data1. "#EC *
DATA: g_cnt_input_recs type i. "#EC *
DATA: g_flg_error type c. "#EC *
DATA: l_lines type i. "#EC *
DATA: l_lines_varcond type i. "#EC *
DATA: l_lines1 type i. "#EC *
DATA: l_tabix type i. "#EC *
DATA: wa_input_data1 type ty_input_data1. "#EC *
DATA: FILE TYPE STRING.
Fields that are made available to the user:
DATA:
g_cnt_records_read TYPE i, "#EC *
g_cnt_records_transferred TYPE i, "#EC *
g_cnt_transactions_read TYPE i, "#EC *
g_cnt_transactions_transferred TYPE i, "#EC *
g_cnt_idocs_package TYPE i. "#EC *
data: v_log_handle type balloghndl. "#EC *
DATA: gt_curr_edi_dc40 TYPE STANDARD TABLE OF edi_dc40 initial size 0."#EC *
DATA: gt_curr_edi_dd40 TYPE STANDARD TABLE OF edi_dd40 initial size 0."#EC *
DATA: wa_curr_edi_dc40 TYPE edi_dc40. "#EC *
DATA: wa_curr_edi_dd40 TYPE edi_dd40. "#EC *
internal table for error messages during conversion
DATA: g_error_tab TYPE type_errortab, "#EC *
wa_errortab TYPE type_errorline. "#EC *
DATA: g_edidd_segnam type EDI4SEGNAM, "#EC *
g_edidd_hlevel type EDI4HLEVEC. "#EC *
DATA: g_segnum(6) TYPE n.
DATA: g_objecttype(2) type C.
DATA: P_FNAME(128) TYPE C VALUE '/usr/sap/trans/vartabheader'. " MODIF ID MD1 OBLIGATORY.
DATA: P_FNAME1(128) TYPE C VALUE '/usr/sap/trans/vartabcontent'. " MODIF ID MD1 OBLIGATORY.
DATA: alv_fldcat TYPE slis_t_fieldcat_alv,
it_fldcat TYPE lvc_t_fcat.
field-symbols: .
data: dy_table type ref to data,
dy_line type ref to data,
xfc type lvc_s_fcat,
ifc type lvc_t_fcat.
data: l_wa_data TYPE TY_CONTENT,
l_tabname TYPE tabname,
itab_data TYPE standard table of TY_CONTENT.
DATA: l_len_slnid TYPE i, "#EC NEEDED
l_len_varcond TYPE i, "#EC NEEDED
l_temp_slnid TYPE i, "#EC NEEDED
l_temp_slnc TYPE char5, "#EC NEEDED
l_temp_varcond TYPE varcond, "#EC NEEDED
l_sub_var TYPE i, "#EC NEEDED
l_val_split TYPE char10. "#EC NEEDED
DATA: l_invalid. "#EC NEEDED
DECLARATION FOR SELECTION SCREEN
*selection-screen skip 1.
*For all the input field entries
SELECTION-SCREEN BEGIN OF BLOCK bl1 WITH FRAME TITLE text-001.
*Parameter for Input File Name:
PARAMETERS: p_inpt TYPE RLGRAP-FILENAME MODIF ID MOD . " Presentation server File Variant table
PARAMETERS: p_inpt1 TYPE RLGRAP-FILENAME MODIF ID MOD . " Presentation server File variant Content
SELECTION-SCREEN END OF BLOCK bl1.
IDoc creation
selection-screen begin of block idocpars
with frame title text-006.
parameters:
p_trfcpt as checkbox default C_X MODIF ID MD3,
p_packge(5) type n default 1 MODIF ID MD3.
selection-screen end of block idocpars.
SELECTION-SCREEN BEGIN OF BLOCK bl5 WITH FRAME TITLE text-038.
Radio Buttons :
parameters:
rb_idocp RADIOBUTTON GROUP RB3 DEFAULT 'X' USER-COMMAND UCOM MODIF ID MD6,
rb_custt RADIOBUTTON GROUP RB3 MODIF ID MD6.
SELECTION-SCREEN END OF BLOCK bl5.
SELECTION-SCREEN BEGIN OF BLOCK bl3 WITH FRAME TITLE text-032.
Radio Buttons :
parameters:
rb_apsrv RADIOBUTTON GROUP RB1 DEFAULT 'X' USER-COMMAND UCOM MODIF ID MD4,
rb_convt RADIOBUTTON GROUP RB1 MODIF ID MD4,
rb_idoc RADIOBUTTON GROUP RB1 MODIF ID MD4,
rb_proc RADIOBUTTON GROUP RB1 MODIF ID MD4.
SELECTION-SCREEN END OF BLOCK bl3.
SELECTION-SCREEN BEGIN OF BLOCK bl4 WITH FRAME TITLE text-037.
Radio Buttons :
parameters:
rb_appct RADIOBUTTON GROUP RB2 DEFAULT 'X' USER-COMMAND UCOM MODIF ID MD5,
rb_conct RADIOBUTTON GROUP RB2 MODIF ID MD5,
rb_cust RADIOBUTTON GROUP RB2 MODIF ID MD5.
SELECTION-SCREEN END OF BLOCK bl4.
INITIALIZATION
INITIALIZATION.
Check selection-screen entries *
*AT SELECTION-SCREEN.
PERFORM sub_get_physical_file USING p_fpath p_fname.
PERFORM sub_get_physical_file1 USING p_fpath1 p_fname1.
AT SELECTION SCREEN
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname.
PERFORM sub_get_file. " CHANGING p_fname. "#EC *
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname1.
PERFORM sub_get_file1. " CHANGING p_fname1. "#EC *
AT SELECTIHi,
I now have a requirement for the following:
Duplicate VARCOND if I Use small letters and capital letters. Sequential number also duplicated.
Here is the code and would appreciate if someone could shed some light on the issue.
*& Report ZVARTABDYNFINAL
PROGRAM DESCRIPTION: Variant Table and Content Upload Interface.
DEVELOPER: Aveek Ghose
CREATION DATE: 2008-08-25
RDD NUMBER: DCDD027
TRANSPORT NUMBER(S): RD2K902769
*-- REVISION HISTORY -
DEVELOPER:
DATE APPLIED: YYYY-MM-DD
SCR NUMBER: <Scope Change Request ID>
RDD NUMBER: <Toolset Object ID>
TRANSPORT NUMBER(S):
DESCRIPTION:
REPORT ZVARTABDYNFINAL NO STANDARD PAGE HEADING
LINE-SIZE 150
LINE-COUNT 55
MESSAGE-ID /factglb/gta_custdev.
*& Include /FACTGLB/GTDMI_VARTAB_TOP02 *
*& Include /FACTGLB/GTDMI_VARTAB_TOP
*& Include /FACTGLB/GTDMI_VARTAB_TOP
PROGRAM DESCRIPTION: Variant Table and Content Upload Interface.
DEVELOPER: Aveek Ghose
CREATION DATE: 2008-08-25
RDD NUMBER: DCDD027
TRANSPORT NUMBER(S): RD2K902769
*-- REVISION HISTORY -
DEVELOPER:
DATE APPLIED: YYYY-MM-DD
SCR NUMBER: <Scope Change Request ID>
RDD NUMBER: <Toolset Object ID>
TRANSPORT NUMBER(S):
DESCRIPTION:
TYPE POOLS
TYPE POOLS
TYPE POOLS
*Type declaration for ALV display
TYPE-POOLS : slis.
Include <icon>.
type-pools: col, "#EC *
icon, "#EC *
sym, "#EC *
abap. "#EC *
Target structure definitions
tables:
E1CUVTM, "#EC *
E1DATEM, "#EC *
E1CUV1M, "#EC *
edp21, "#EC *
edi_dc40, "#EC *
edi_dd40, "#EC *
edi_ds40. "#EC *
GLOBAL TYPES
TYPES : BEGIN OF ty_vartab.
include structure E1CUVTM.
TYPES: END OF ty_vartab.
TYPES : BEGIN OF ty_vartabdate.
INCLUDE STRUCTURE E1DATEM.
TYPES : END OF ty_vartabdate.
*Structure for data retreived
TYPES : BEGIN OF ty_vardetails.
INCLUDE STRUCTURE E1CUV1M.
TYPES : END OF ty_vardetails.
*Structure for data retreived from table tabinput.
TYPES : BEGIN OF ty_tabinput,
lines type string,
END OF ty_tabinput.
*Structure for data retreived from Table dsn_input.
TYPES : BEGIN OF ty_dsninput, "#EC *
LINE(101) type c,
END OF ty_dsninput.
*Structure for data retreived from Table dsn_input.
TYPES : BEGIN OF ty_newinput, "#EC *
LINE(101) type c,
flag(1) type c,
END OF ty_newinput.
*Structure for keeping the values of all the custom tables
TYPES : BEGIN OF ty_custom_tabs,
matnr TYPE matnr, "Material Number
werks TYPE werks_d, "Plant
lgort TYPE lgort_d, "Storage Location
qunty TYPE P DECIMALS 2, "Standard Order Quantity
det_loc TYPE CHAR6, "Detail Location
class TYPE CHAR2, "Class
rate TYPE P DECIMALS 2, "Rate
END OF ty_custom_tabs.
*Type declared for the internal table and work area which will store
*fields for error log
TYPES : BEGIN OF ty_error_log,
matnr TYPE matnr, "Material Number
mtart TYPE mtart, "Material Type
sel_data TYPE char10, "No of selectyed data
END OF ty_error_log.
*Structure for keeping the output data
TYPES : BEGIN OF ty_final,
VTNAM(018) type C,
CHAR1(030) type C,
CHAR2(030) type C,
CHAR3(030) type C,
CHAR4(030) type C,
CHAR5(030) type C,
CHAR6(030) type C,
CHAR7(030) type C,
CHAR8(030) type C,
CHAR9(030) type C,
CHAR10(030) type C,
CHAR11(030) type C,
CHAR12(030) type C,
CHAR13(030) type C,
CHAR14(030) type C,
CHAR15(030) type C,
FLAG(001) type C,
END OF ty_final.
TYPES: begin of TY_CONTENTHD,
VTNAM(018) type C,
FLAG(001) type C,
end of TY_CONTENTHD.
TYPES: begin of TY_CONTENT,
VTNAM(018) type C,
CHAR1(030) type C,
CHAR2(030) type C,
CHAR3(030) type C,
CHAR4(030) type C,
CHAR5(030) type C,
CHAR6(030) type C,
CHAR7(030) type C,
CHAR8(030) type C,
CHAR9(030) type C,
CHAR10(030) type C,
CHAR11(030) type C,
CHAR12(030) type C,
CHAR13(030) type C,
CHAR14(030) type C,
CHAR15(030) type C,
FLAG(001) type C,
Z_VARCOND type VARCOND.
TYPES: end of TY_CONTENT.
TYPES: begin of TY_CONTENTTAB,
VTNAM(018) type C,
COMP1(30) TYPE C,
CHAR1(030) type C,
COMP2(30) TYPE C,
CHAR2(030) type C,
COMP3(30) TYPE C,
CHAR3(030) type C,
COMP4(30) TYPE C,
CHAR4(030) type C,
COMP5(30) TYPE C,
CHAR5(030) type C,
COMP6(30) TYPE C,
CHAR6(030) type C,
COMP7(30) TYPE C,
CHAR7(030) type C,
COMP8(30) TYPE C,
CHAR8(030) type C,
COMP9(30) TYPE C,
CHAR9(030) type C,
COMP10(30) TYPE C,
CHAR10(030) type C,
COMP11(30) TYPE C,
CHAR11(030) type C,
COMP12(30) TYPE C,
CHAR12(030) type C,
COMP13(30) TYPE C,
CHAR13(030) type C,
COMP14(30) TYPE C,
CHAR14(030) type C,
COMP15(30) TYPE C,
CHAR15(030) type C,
FLAG(001) type C.
TYPES: end of TY_CONTENTTAB.
TYPES: BEGIN OF TY_E1CUVTM,
MSGFN TYPE MSGFN,
VAR_TAB TYPE APITABL,
STATUS TYPE RCUTBST,
VTGROUP TYPE RCUTBGR,
AUTHSTRUC TYPE RCUTBBE,
AUTHENTRY TYPE RCUFNBI,
FLDELETE TYPE FLLKENZ,
DBTABNAME TYPE TABNAME16,
DBCONACTIVE TYPE DBCON_ACTI,
PRESDEC TYPE VTDCT,
END OF TY_E1CUVTM.
TYPES: BEGIN OF TY_E1CUV1M,
MSGFN TYPE MSGFN,
VTLINENO TYPE VTLINENO,
VTCHARACT TYPE ATNAM,
ATWRT TYPE ATWRT,
ATFLV TYPE ATFLV,
ATAWE TYPE MSEHI,
ATFLB TYPE ATFLB,
ATAW1 TYPE MSEHI,
ATCOD TYPE ATCOD,
ATTLV TYPE ATTLV,
ATTLB TYPE ATTLB,
ATPRZ TYPE ATPRZ,
ATINC TYPE ATINC,
VTLINENO5 TYPE VTLINENO5,
END OF TY_E1CUV1M.
TYPES: BEGIN OF TY_E1DATEM,
MSGFN TYPE MSGFN,
KEY_DATE TYPE SYDATUM,
AENNR TYPE AENNR,
EFFECTIVITY TYPE CC_MTEFF,
END OF TY_E1DATEM.
TYPES: BEGIN OF ty_vtnam,
vtint TYPE vtint, " Internal number of variant table
vtnam TYPE vtnam, " Name of variant table
dbtab_name type tabname16, "Custom table Name
error TYPE char1, " Indicates error in data format
reas TYPE char50, " Reason for failure
END OF ty_vtnam.
Get data type for characteristic
TYPES: BEGIN OF ty_cabn,
atinn TYPE atinn, "Internal characteristic
atnam TYPE atnam, "Characteristic Name
atfor TYPE atfor, "Data type of characteristic
atson TYPE atson, "Indicator: Additional Values
atprt TYPE atprt, "Check table
atprr TYPE atprr, "Name of Check Report Program
atprf TYPE atprf, "Function Module for Checking Values
anzdz TYPE anzdz, "Number of Decimal Places
check TYPE char1, "Indicates check required or not
END OF ty_cabn.
Get field names of variant table
TYPES: BEGIN OF ty_cuvtab_fld,
vtint TYPE vtint, " Internal number of variant table
atinn TYPE atinn, " Internal characteristic
vtpos TYPE vtpos, " Item number of characteristic in variant
*mod-012
DBFLD type NAME_FELD,
*mod-012
exist TYPE char1, " X Indictaes characteristic is part of fil
END OF ty_cuvtab_fld.
Store all data in internal table
TYPES: BEGIN OF ty_file,
vtnam TYPE vtnam,
char1 TYPE atwrt,
char2 TYPE atwrt,
char3 TYPE atwrt,
char4 TYPE atwrt,
char5 TYPE atwrt,
char6 TYPE atwrt,
char7 TYPE atwrt,
char8 TYPE atwrt,
char9 TYPE atwrt,
char10 TYPE atwrt,
char11 TYPE atwrt,
char12 TYPE atwrt,
char13 TYPE atwrt,
char14 TYPE atwrt,
char15 TYPE atwrt,
flag TYPE char1,
error TYPE char50,
END OF ty_file.
To check for duplicates
TYPES: BEGIN OF ty_dupl,
vtnam TYPE vtnam,
char1 TYPE atwrt,
char2 TYPE atwrt,
char3 TYPE atwrt,
char4 TYPE atwrt,
char5 TYPE atwrt,
char6 TYPE atwrt,
char7 TYPE atwrt,
char8 TYPE atwrt,
char9 TYPE atwrt,
char10 TYPE atwrt,
char11 TYPE atwrt,
char12 TYPE atwrt,
char13 TYPE atwrt,
char14 TYPE atwrt,
char15 TYPE atwrt,
slnid TYPE slnid,
END OF ty_dupl.
Get previously loaded characteristic values for internal table (CHAR)
TYPES: BEGIN OF ty_cuvtab_valc,
vtint TYPE vtint, " Internal number of variant table
slnid TYPE slnid, " Key for value combination in variant tab
atinn TYPE atinn, " Internal characteristic
valc TYPE atwrt, " Characteristic Value
END OF ty_cuvtab_valc.
Get previously loaded characteristic values for internal table (NUM)
TYPES: BEGIN OF ty_cuvtab_valn,
vtint TYPE vtint, " Internal number of variant table
slnid TYPE slnid, " Key for value combination in variant tab
atinn TYPE atinn, " Internal characteristic
val_from TYPE atflv, " Internal floating point from
END OF ty_cuvtab_valn.
Store column positions of characteristics
TYPES: BEGIN OF ty_col_pos,
vtint TYPE vtint, " Internal number of variant table
vtnam TYPE vtnam, " Variant table name
atinn TYPE atinn, "Internal characteristic
atnam TYPE atnam, "Characteristic Name
field TYPE fieldname, "Field name
req TYPE char1, " Required or not
vtpos TYPE vtpos, " Item number of characteristics
END OF ty_col_pos.
Store valid values for characteristics
TYPES: BEGIN OF ty_cawn,
atinn TYPE atinn, " Internal characteristic
atzhl TYPE atzhl, " Int counter
atwrt TYPE atwrt, " Characteristic Value
atflv TYPE atflv, " Internal floating point from
lkenz TYPE lkenz, " Deletion indicator
END OF ty_cawn.
Store error messages for individual lines
TYPES: BEGIN OF ty_error,
vtnam TYPE vtnam, " Variant table name
fname TYPE fieldname, " Fieldname
atnam TYPE atnam, " Characteristic name
atwrt TYPE atwrt, " Characteristic value
row TYPE char5, " Row id
END OF ty_error.
Begin TPR# 4618
To store unique number for variant
TYPES: BEGIN OF ty_vnt_ma,
vtnam TYPE vtnam,
unique_no TYPE ZGTDM_UNQN,
no_chr TYPE ZGTDM_NO_CHR,
END OF ty_vnt_ma.
TYPES: BEGIN OF ty_dbtab,
vtint TYPE vtint,
vtnam TYPE vtnam,
DBTAB_NAME TYPE TABNAME16,
END OF ty_dbtab.
To find out concatenated number for
TYPES: BEGIN OF ty_split,
f1 TYPE char6,
END OF ty_split.
TYPES: BEGIN OF ty_charval,
char TYPE char30,
END OF ty_charval.
TYPES: BEGIN OF TY_DATA,
name TYPE string,
value(15) type c,
END OF TY_DATA.
DATA: I_DATATAB TYPE STANDARD TABLE OF TY_DATA. "#EC NEEDED
TYPES:
TUMLS_MESSTYPE type /SAPDMC/LS_MESSTYPE,
TUMLS_MESSTYPETXT type EDI_TEXT60,
TUMLS_MESSCODE type EDIPMESCOD.
TYPES:
TUMLS_TABNAME TYPE TABNAME, "#EC *
TUMLS_SEGMENT TYPE TABNAME. "#EC *
TYPES:
TUMLS_PATHFILE TYPE /SAPDMC/LS_FILENAME,
TUMLS_FILENAME TYPE /SAPDMC/LS_FILENAME,
TUMLS_FILETEXT TYPE /SAPDMC/LS_FILETEXT.
TYPES:
BEGIN OF type_errorline,
msgty type SYMSGTY,
id type SYMSGID,
msgno type symsgno,
par1 type symsgv,
par2 type symsgv,
par3 type symsgv,
par4 type symsgv,
END OF type_errorline.
TYPES:
type_errortab TYPE SORTED TABLE
OF type_errorline
WITH NON-UNIQUE KEY id msgno par1 par2 par3 par4.
DATA:
LV_LINE2 TYPE REF TO DATA.
GLOBAL INTERNAL TABLES
DATA : i_newinput TYPE STANDARD TABLE OF ty_newinput INITIAL SIZE 0."#EC *
DATA : i_contentheader1 TYPE STANDARD TABLE OF ty_contenthd INITIAL SIZE 0."#EC *
DATA : i_contenttab1 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab2 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab3 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab4 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab5 TYPE STANDARD TABLE OF ty_contenttab INITIAL SIZE 0."#EC *
DATA : i_E1CUV1M TYPE STANDARD TABLE OF E1CUV1M INITIAL SIZE 0."#EC *
DATA : i_errortab TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
GLOBAL WORK AREAS
**Internal Table for the structure TY_T001L
DATA : wa_vartab TYPE ty_vartab. "#EC *
DATA : wa_vartabdate TYPE ty_vartabdate. "#EC *
DATA : wa_vardetails TYPE ty_vardetails. "#EC *
DATA : wa_tabinput TYPE ty_tabinput. "#EC *
DATA : wa_dsninput TYPE ty_dsninput. "#EC *
DATA : wa_newinput TYPE ty_newinput. "#EC *
DATA : wa_gnewinput TYPE ty_newinput. "#EC *
DATA : wa_ginput_data TYPE ty_newinput. "#EC *
DATA : wa_final TYPE ty_final. "#EC *
DATA : wa_content TYPE ty_content. "#EC *
DATA : wa_contenthd TYPE ty_contenthd. "#EC *
DATA : wa_contentheader type ty_contenthd. "#EC *
DATA : wa_contenttab TYPE ty_content. "#EC *
DATA : wa_content1 TYPE ty_content. "#EC *
DATA : wa_contenthd1 TYPE ty_contenthd. "#EC *
DATA : wa_contentheader1 type ty_contenthd. "#EC *
DATA : wa_contenttab1 TYPE ty_content. "#EC *
DATA : wa_contenttab2 TYPE ty_content. "#EC *
DATA : wa_contenttab3 TYPE ty_content. "#EC *
DATA : wa_contenttab4 TYPE ty_content. "#EC *
DATA : wa_contenttab5 TYPE ty_contentTAB. "#EC *
DATA : wa_E1CUVTM TYPE E1CUVTM. "#EC *
DATA : wa_E1CUV1M TYPE E1CUV1M. "#EC *
DATA : wa_E1DATEM TYPE E1DATEM. "#EC *
DATA : wa_error_tab TYPE solisti1. "#EC *
INTERNAL TABLES AND WORK AREAS FOR BDC
*Internal Table to store the data to display the error message
DATA : i_errormsg TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
*Internal Table to store the data to display the error message
DATA : i_error TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
DATA : itab_error TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
**Work area to store the data to display the error message
DATA : wa_errormsg TYPE solisti1. "#EC *
**Internal table which will store data for the error log
DATA:i_error_log TYPE STANDARD TABLE OF ty_error_log INITIAL SIZE 0."#EC *
GLOBAL VARIABLES
DATA: G_FILE TYPE string. "#EC *
DATA : g_ctr_input_recs(5) type c. "#EC *
DATA: g_ctr_output_recs(5) type p. "#EC *
data : g_msg(100) type c. "#EC *
data: g_struct_file TYPE string. "#EC *
data: g_login type FILEINTERN. "#EC *
data: g_phyin type string. "#EC *
DATA: g_lprnt type RSPOPSHORT. "#EC *
DATA: g_FNAME1 TYPE STRING. "#EC *
DATA : g_repid TYPE repid, "#EC *
g_exit(1) TYPE C, "#EC *
gx_variant type disvariant. "#EC *
DATA : g_lines TYPE i . "#EC *
data : g_save(1) type c. "#EC *
DATA : g_splid TYPE rspoid . "#EC *
data: p_login type FILEINTERN. "#EC *
data: p_phyin type string. "#EC *
GLOBAL CONSTANTS
CONSTANTS c_msgar TYPE rslgarea VALUE 'F8'. "#EC *
CONSTANTS c_msgid TYPE rslgsubid VALUE 'E'. "#EC *
CONSTANTS c_urgnc TYPE char04 VALUE 'HIGH'. "#EC *
CONSTANTS C_X(1) TYPE C VALUE 'X'. "#EC *
CONSTANTS C_Y(1) TYPE C VALUE 'Y'. "#EC *
CONSTANTS C_Z(1) TYPE C VALUE 'Z'. "#EC *
CONSTANTS C_E(1) TYPE C VALUE 'E'. "#EC *
CONSTANTS C_SAP(3) TYPE C VALUE 'SAP'. "#EC *
CONSTANTS C_MOD(3) TYPE C VALUE 'MOD'. "#EC *
CONSTANTS C_MD1(3) TYPE C VALUE 'MD1'. "#EC *
CONSTANTS C_MD2(3) TYPE C VALUE 'MD2'. "#EC *
CONSTANTS C_MD3(3) TYPE C VALUE 'MD3'. "#EC *
CONSTANTS C_MD4(3) TYPE C VALUE 'MD4'. "#EC *
CONSTANTS C_MD5(3) TYPE C VALUE 'MD5'. "#EC *
constants: c_000001(6) type c value '000001', "#EC *
c_e1cuv1m(7) type c value 'E1CUV1M', "#EC *
c_02(2) type c value '02', "#EC *
c_009(3) type c value '009', "#EC *
c_0001(4) type c value '0001'. "#EC *
constants: c_e1datem(7) type c value 'E1DATEM'. "#EC *
constants: c_e1cuvtm(7) type c value 'E1CUVTM'. "#EC *
GLOBAL INTERNAL TABLES FOR ALV DISPLAY
*Internal tables for ALV Field cat
DATA :
i_fieldcat_ov TYPE STANDARD TABLE OF slis_fieldcat_alv INITIAL SIZE 0,"#EC *
i_fieldcat_dtl TYPE STANDARD TABLE OF slis_fieldcat_alv INITIAL SIZE 0,"#EC *
i_fieldcat_ov1 TYPE lvc_t_fcat, "#EC *
i_events TYPE slis_t_event. "#EC *
GLOBAL WORK AREAS FOR ALV DISPLAY
*Work area for ALV Field layout
DATA : wa_layout TYPE slis_layout_alv. "#EC *
*Work area for Field Cat. Table
DATA : wa_fieldcat TYPE slis_fieldcat_alv. "#EC *
GLOBAL VARIABLES FOR ALV DISPLAY
DATA : g_event TYPE slis_t_event. "#EC *
DATA : g_top_of_page TYPE slis_t_listheader. "#EC *
DATA : g_ok_code TYPE char4. "#EC *
DATA : g_variant type disvariant. "#EC *
GLOBAL CONSTANTS FOR ALV DISPLAY
BAL handling
data: iv_log_handle type BALLOGHNDL. "#EC *
data: is_log_header type bal_s_log. "#EC *
data: iv_object type bal_s_log-object value 'CAPI'. "#EC *
data: iv_subobject type bal_s_log-subobject value 'CAPI_LOG'."#EC *
data: iv_tcode type bal_s_log-altcode value 'SE38'. "#EC *
*MOD-005
RANGES:
R_MESTYP FOR EDIDC-MESTYP, "#EC *
R_CREDAT FOR EDIDC-CREDAT, "#EC *
R_CRETIM FOR EDIDC-CRETIM, "#EC *
R_SNDPRT FOR EDIDC-SNDPRT, "#EC *
R_SNDPRN FOR EDIDC-SNDPRN. "#EC *
DATA:
L_MESSTYPE TYPE TUMLS_MESSTYPE. "#EC *
*MOD-005
data: p_sndprn TYPE EDI_SNDPRN, "#EC *
p_sndprt TYPE EDI_SNDPRT, "#EC *
p_sndpor TYPE EDI_SNDPOR. "#EC *
data: p_rcvprn TYPE EDI_RCVPRN, "#EC *
p_rcvprt TYPE EDI_RCVPRT, "#EC *
p_rcvpor TYPE EDI_RCVPOR. "#EC *
data:
init_E1CUVTM type E1CUVTM, "#EC *
prev_E1CUVTM type E1CUVTM, "#EC *
init_E1DATEM type E1DATEM, "#EC *
prev_E1DATEM type E1DATEM, "#EC *
init_E1CUV1M type E1CUV1M, "#EC *
prev_E1CUV1M type E1CUV1M. "#EC *
Source structure definitions
data:
begin of LSMW_TAB_CONTENT, "#EC *
VTNAM(018) type C,
CHAR1(030) type C,
CHAR2(030) type C,
CHAR3(030) type C,
CHAR4(030) type C,
CHAR5(030) type C,
CHAR6(030) type C,
CHAR7(030) type C,
CHAR8(030) type C,
CHAR9(030) type C,
CHAR10(030) type C,
CHAR11(030) type C,
CHAR12(030) type C,
CHAR13(030) type C,
CHAR14(030) type C,
CHAR15(030) type C,
FLAG(001) type C,
end of LSMW_TAB_CONTENT.
Counters
data:
g_cnt_VAR_TAB type i, "#EC *
g_cnt_TAB_CONTENT type i. "#EC *
Counter ct_xxxxxxxxxx: number of transferred records
data:
ct_edi_dc40 type i, "#EC *
cs_edi_dc40 type i, "#EC *
ct_E1CUVTM type i, "#EC *
cs_E1CUVTM type i, "#EC *
ct_E1DATEM type i, "#EC *
cs_E1DATEM type i, "#EC *
ct_E1CUV1M type i, "#EC *
cs_E1CUV1M type i. "#EC *
Global data definitions and data declarations
DATA: wa_cabn TYPE ty_cabn,
wa_cawn TYPE ty_cawn,
wa_file TYPE ty_file,
wa_vtnam TYPE ty_vtnam,
wa_cuvtab_fld TYPE ty_cuvtab_fld,
wa_cuvtab_valn TYPE ty_cuvtab_valn,
wa_cuvtab_valc TYPE ty_cuvtab_valc,
wa_col_pos TYPE ty_col_pos,
wa_error TYPE ty_error,
wa_dupl TYPE ty_dupl,
wa_dupl_file TYPE ty_dupl.
DATA: wa_vnt_ma TYPE ty_vnt_ma,
wa_split TYPE ty_split.
DATA: wa_charval TYPE ty_charval. "#EC *
Internal table
DATA: i_cabn TYPE STANDARD TABLE OF ty_cabn, "#EC *
i_cabn_temp TYPE STANDARD TABLE OF ty_cabn, "#EC *
i_cabn_atinn TYPE STANDARD TABLE OF ty_cabn, "#EC *
i_file TYPE STANDARD TABLE OF ty_file, "#EC *
i_file_tmp TYPE STANDARD TABLE OF ty_file, "#EC *
i_vtnam TYPE STANDARD TABLE OF ty_vtnam, "#EC *
i_cuvtab TYPE STANDARD TABLE OF ty_vtnam, "#EC *
i_cuvtab_fld TYPE STANDARD TABLE OF ty_cuvtab_fld, "#EC *
i_cuvtab_valn TYPE STANDARD TABLE OF ty_cuvtab_valn, "#EC *
i_cuvtab_valc TYPE STANDARD TABLE OF ty_cuvtab_valc, "#EC *
i_col_pos TYPE STANDARD TABLE OF ty_col_pos, "#EC *
i_cawn TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cawn_n TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cawn_c TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cawn_i TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cuv_error TYPE STANDARD TABLE OF ty_vtnam, "#EC *
i_dupl TYPE STANDARD TABLE OF ty_dupl, "#EC *
i_dbtab TYPE STANDARD TABLE OF ty_dbtab. "#EC *
DATA: i_vnt_ma TYPE STANDARD TABLE OF ty_vnt_ma, "#EC *
i_split TYPE STANDARD TABLE OF ty_split. "#EC *
DATA: i_dupl_file TYPE STANDARD TABLE OF ty_dupl. "#EC *
DATA: i_charval TYPE STANDARD TABLE OF ty_charval. "#EC *
Constants
CONSTANTS: c_char TYPE atfor VALUE 'CHAR', "#EC *
c_date TYPE atfor VALUE 'DATE', "#EC *
c_time TYPE atfor VALUE 'TIME', "#EC *
c_varcond TYPE atnam VALUE 'Z_VARCOND'. "#EC *
Field Symbols
FIELD-SYMBOLS: <fs_vtnam> TYPE ty_vtnam, "#EC *
<fs_cabn> TYPE ty_cabn, "#EC *
<fs_cuvtab_fld> TYPE ty_cuvtab_fld, "#EC *
<fs_dupl> TYPE ty_dupl. "#EC *
FIELD-SYMBOLS: <FS_DYN_WA> TYPE ANY.
Variables
DATA: g_raw(500) TYPE c, "#EC *
g_invalid TYPE char1, "#EC *
g_error TYPE char1, "#EC *
g_message TYPE char50, "#EC *
g_slnid_c TYPE slnid, "#EC *
g_slnid_n TYPE slnid, "#EC *
g_row TYPE char5. "#EC *
DATA: g_varcond TYPE varcond, "Variant condition "#EC NEEDED
g_split_var TYPE i, "#EC *
g_split_var1 type i. "#EC *
Types: begin of ty_charname,
name type atnam,
end of ty_charname.
data: wa_charname type ty_charname, "#EC *
i_charname type standard table of ty_charname. "#EC *
data: cnt_i type i, "#EC *
g_tabix type char10. "#EC *
Types: begin of ty_itab_zedidc40.
include structure edi_dc40.
TYPES: end of ty_itab_zedidc40.
Types: begin of ty_itab_zedidd40.
include structure edi_dd40.
TYPES: end of ty_itab_zedidd40.
DATA: itab_zedidc40 type standard table of
ty_itab_zedidc40 initial size 0. "#EC *
DATA: itab_zedidd40 type standard table of
ty_itab_zedidd40 initial size 0. "#EC *
DATA: wa_itab_zedidc40 type ty_itab_zedidc40. "#EC NEEDED
DATA: wa_itab_zedidd40 type ty_itab_zedidd40.
*MOD-009
data: itab_ze1cuvtm type e1cuvtm, "#EC *
itab_ze1datem type e1datem, "#EC *
itab_ze1cuv1m type e1cuv1m. "#EC *
data: wdocnum(16) type n value 0. "#EC *
data: wsegnum(6) type n value 0. "#EC *
data: witemno(10) type n value 0. "#EC *
data: witemno_new(10) type n value 0. "#EC *
data: witemno_gst(10) type n value 0. "#EC *
data: witemno_qst(10) type n value 0. "#EC *
TYPES: BEGIN OF ty_input_data1, "#EC *
line(560) type c,
flag(1) type c,
END OF ty_input_data1.
DATA: i_input_data type standard table of
ty_input_data1 initial size 0. "with header line.
DATA: i_input_data1 type standard table of
ty_input_data1 initial size 0. "with header line.
DATA: wa_input_data type ty_input_data1. "#EC *
DATA: g_cnt_input_recs type i. "#EC *
DATA: g_flg_error type c. "#EC *
DATA: l_lines type i. "#EC *
DATA: l_lines1 type i. "#EC *
DATA: l_tabix type i. "#EC *
DATA: wa_input_data1 type ty_input_data1. "#EC *
DATA: FILE TYPE STRING.
Fields that are made available to the user:
DATA:
g_cnt_records_read TYPE i, "#EC *
g_cnt_records_transferred TYPE i, "#EC *
g_cnt_transactions_read TYPE i, "#EC *
g_cnt_transactions_transferred TYPE i, "#EC *
g_cnt_idocs_package TYPE i. "#EC *
data: v_log_handle type balloghndl. "#EC *
DATA: gt_curr_edi_dc40 TYPE STANDARD TABLE OF edi_dc40 initial size 0."#EC *
DATA: gt_curr_edi_dd40 TYPE STANDARD TABLE OF edi_dd40 initial size 0."#EC *
DATA: wa_curr_edi_dc40 TYPE edi_dc40. "#EC *
DATA: wa_curr_edi_dd40 TYPE edi_dd40. "#EC *
internal table for error messages during conversion
DATA: g_error_tab TYPE type_errortab, "#EC *
wa_errortab TYPE type_errorline. "#EC *
DATA: g_edidd_segnam type EDI4SEGNAM, "#EC *
g_edidd_hlevel type EDI4HLEVEC. "#EC *
DATA: g_segnum(6) TYPE n.
DATA: g_objecttype(2) type C.
DATA: P_FNAME(128) TYPE C VALUE '/usr/sap/trans/vartabheader'. " MODIF ID MD1 OBLIGATORY.
DATA: P_FNAME1(128) TYPE C VALUE '/usr/sap/trans/vartabcontent'. " MODIF ID MD1 OBLIGATORY.
field-symbols: <dyn_table> type standard table,
<dyn_table1> type standard table,
<dyn_wa>,
<dyn_wa1> TYPE ANY.
data: dy_table type ref to data,
dy_line type ref to data,
xfc type lvc_s_fcat,
ifc type lvc_t_fcat.
data: l_tabname TYPE tabname.
DATA: l_len_slnid TYPE i, "#EC NEEDED
l_len_varcond TYPE i, "#EC NEEDED
l_temp_slnid TYPE i, "#EC NEEDED
l_temp_slnc TYPE char5, "#EC NEEDED
l_temp_varcond TYPE varcond, "#EC NEEDED
l_sub_var TYPE i, "#EC NEEDED
l_val_split TYPE char10. "#EC NEEDED
DATA: l_invalid. "#EC NEEDED
*Include for Global Data Declaration
*INCLUDE ZGTDMI_VARTAB_TOPDYN.
*INCLUDE /FACTGLB/GTDMI_VARTAB_TOP02.
*Include for Selection Screen
*INCLUDE ZGTDMI_VARTAB_SELDYN.
*INCLUDE /FACTGLB/GTDMI_VARTAB_SEL02.
*Include for Sub Routines
*INCLUDE ZGTDMI_VARTAB_FORMSDYN.
*INCLUDE /FACTGLB/GTDMI_VARTAB_FORMS02.
*& Include /FACTGLB/GTDMI_VARTAB_SEL02 *
*& Include /FACTGLB/GTDMI_VARTAB_SEL
*& Include /FACTGLB/GTDMI_VARTAB_SEL
PROGRAM DESCRIPTION: Variant Table and Content Upload Interface.
DEVELOPER: Aveek Ghose
CREATION DATE: 2008-08-25
RDD NUMBER: DCDD027
TRANSPORT NUMBER(S): RD2K902769
*-- REVISION HISTORY -
DEVELOPER:
DATE APPLIED: YYYY-MM-DD
SCR NUMBER: <Scope Change Request ID>
RDD NUMBER: <Toolset Object ID>
TRANSPORT NUMBER(S):
DESCRIPTION:
DECLARATION FOR SELECTION SCREEN
*selection-screen skip 1.
*For all the input field entries
SELECTION-SCREEN BEGIN OF BLOCK bl1 WITH FRAME TITLE text-001.
*Parameter for Input File Name:
PARAMETERS: p_inpt TYPE RLGRAP-FILENAME MODIF ID MOD . " Presentation server File Variant table
PARAMETERS: p_inpt1 TYPE RLGRAP-FILENAME MODIF ID MOD . " Presentation server File variant Content
SELECTION-SCREEN END OF BLOCK bl1.
IDoc creation
selection-screen begin of block idocpars
with frame title text-006.
parameters:
p_trfcpt as checkbox default C_X MODIF ID MD3,
p_packge(5) type n default 1 MODIF ID MD3.
selection-screen end of block idocpars.
SELECTION-SCREEN BEGIN OF BLOCK bl3 WITH FRAME TITLE text-032.
Radio Buttons :
parameters:
rb_apsrv RADIOBUTTON GROUP RB1 DEFAULT 'X' USER-COMMAND UCOM,
rb_convt RADIOBUTTON GROUP RB1,
rb_idoc RADIOBUTTON GROUP RB1.
rb_proc RADIOBUTTON GROUP RB1.
SELECTION-SCREEN END OF BLOCK bl3.
INITIALIZATION
INITIALIZATION.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_INPT.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
STATIC = C_X
CHANGING
FILE_NAME = P_INPT
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE e241.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_INPT1.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
STATIC = C_X
CHANGING
FILE_NAME = P_INPT1
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2.
-
Dynamic List and Security Issue
Hi
I have a Dynamic List Wizard for orders, which the user can click on edit to edit or modify the order and if the user choose "Yes" to submit ( the order form has a submit filed which has Yes / No Values)then the EDIT button disappear and the user has no more control on the record(using show if conditional Region server behavior).
- Now i noticed that when i click on the edit the address bar includes the (www.mysite.com/form.php?order_id=1) now say the order Number 2 is already submitted (still on the list but no Edit button for it) if i write 3 or 4 or any other number instead of 1 at the address bar (www.mysite.com/form.php?order_id=3) the record which has the order number 3 displays on the screen and then you can edit it and when click update the Edit Button becomes Active which destroy the whole concept.
so, how to fix that?Hi Lorie,
Taking it a step further
interesting that you´re mentioning this -- because I was just in the middle of finding a workaround for the very same issue ;-)
I actually did find a pretty easy solution, which basically goes like this:
1) wrap the whole table *plus* any possibly added hidden fields located below this table in a "Show IF conditional region" behaviour -- but make sure to *not* include the buttons within the "KT_bottombuttons" div in here.
2) as I assume that your "supplier_name" column holds a numeric value which equals the user´s "kt_login_id" Session Variable (which it should !), define the following conditions for the "Show IF conditional region" behaviour:
Expression 1: choose "supplier_name" from the tNG recordset
Condition: ==
Expression 2: choose Session -> kt_login_id
3) tick the Has ELSE option
4) confirm with OK
5) replace the default "has Else" message with something meaningful like "you can´t edit this record !"
Switching to Code view and navigating to the very start of your "Show IF conditional region" should display something like this:
if (@$row_rsqueryname['supplier_name'] == @$_SESSION['kt_login_id']) {
When viewing the modified Dynamic Form in a browser, you´ll note that this solution will indeed display the form instances for all "authorized" records, whereas those form instances which don´t match the required credentials will be replaced with that "has else" message.
BUT !! This solution has one major drawback which I haven´t been able to resolve yet :: when the Dynamic Form goes into Insert Record mode
(means when you click the "add new" link in the Dynamic List), all inner form instances will display that "has else" message.
The only workaround I currently can come up with is to have the List´s "add new" link point to a separate "add_new.php" page that´s going to insert a single record.
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver -
Dynamic Regions and parameters - issue
Jdev 11.1.1.6
I have a main page that contains a dynamic region. I want to pass parameters to the region.
Note that I have successfully created parameters for a NORMAL region inside a "parent" form. With a normal "child" region in a "parent",
1. Open the "child" taskflow, click on the whitepace, go to overview, then paraemeters and define a parameter name and value, ex: InputParam and #{pageFlowScope.InputParam}.
2. Open the "parent" form, click on the region, go to bindings, and edit the region. You see the parameter you specified, InputParam and you can enter a value. This value will come from the parent.
3. Set refresh to if needed.
However,
With a dynamic region containing more than one "child" taskflow, I am getting an error. I do everything the same above.
However, when I have the taskflow selected on the bindings tab of the parent form, and click on the structure window, parameter node, The ID text field is surrounded by orange, and a message displays that the reference to "InputParam" is not found.
How are the name or id values specified for a dynamic region? How does one map a parameter from the parent to the "child"? Do you need to put this into a bean?
Thanks,
Stuart1) Parent A tasflow contains Child B taskflow.
2) Child B expects a parameter called 'inputParameterChild'
3) This will be defined inside the child B taskflow with 'java.lang.String' and value as '#{pageFlowScope.inputParam}'
4) When you click the child B taskflow in parent A taskflow you will see the parameter expected by child B as 'inputParameterChild'
5) Now you can pass the value as '#{pageFlowScope.inputParam}' , here you should have the inputParam set in the bean or in the parent taskflow as explained in step 2 and 3
are you still facing the issue? -
It appears that you can't update the label property of a TreeNode object (there
is a getLabel(), but no setLabel()). Is there a reason for this, am I missing
something?If you have got a solution for your problem please let me know as well.
My requirement is to develop a database driven netui tree control (also embedding a chkbox against each node!)
Thanks & Regards :-D -
Issues in persisting dynamic entity and view objects using MDS
Hi All,
I'm trying to create dynamic entity and view objects per user session and to persist these objects throughout the session, I'm trying to use MDS configurations(either file or Database) in adf-config.xml.
I'm facing following two errors while trying to run the app module:
1. MDS error (MetadataNotFoundException): MDS-00013: no metadata found for metadata object "/model/DynamicEntityGenModuleOperations.xml"
2. oracle.mds.exception.ReadOnlyStoreException: MDS-01273: The operation on the resource /sessiondef/dynamic/DynamicDeptEntityDef.xml failed because source metadata store mapped to the namespace / DEFAULT is read only.
I've gone through the following links which talks about the cause of the issue, but still can't figure out the issue in the code or the config file. Please help if, someone has faced a similar issue.
[http://docs.oracle.com/cd/E28271_01/doc.1111/e25450/mds_trouble.htm#BABIAGBG |http://docs.oracle.com/cd/E28271_01/doc.1111/e25450/mds_trouble.htm#BABIAGBG ]
[http://docs.oracle.com/cd/E16162_01/core.1112/e22506/chapter_mds_messages.htm|http://docs.oracle.com/cd/E16162_01/core.1112/e22506/chapter_mds_messages.htm]
Attached is the code for dynamic entity/view object generation and corresponding adf-config.xml used.
///////////App Module Implementation Class/////////////////////////
public class DynamicEntityGenModuleImpl extends ApplicationModuleImpl implements DynamicEntityGenModule {
private static final String DYNAMIC_DETP_VO_INSTANCE = "DynamicDeptVO";
* This is the default constructor (do not remove).
public DynamicEntityGenModuleImpl() {
public ViewObjectImpl getDepartmentsView1() {
return (ViewObjectImpl) findViewObject("DynamicDeptVO");
public void buildDynamicDeptComp() {
ViewObject internalDynamicVO = findViewObject(DYNAMIC_DETP_VO_INSTANCE);
if (internalDynamicVO != null) {
System.out.println("OK VO exists, return Defn- " + internalDynamicVO.getDefFullName());
return;
EntityDefImpl deptEntDef = buildDeptEntitySessionDef();
ViewDefImpl viewDef = buildDeptViewSessionDef(deptEntDef);
addViewToPdefApplicationModule(viewDef);
private EntityDefImpl buildDeptEntitySessionDef() {
try {
EntityDefImpl entDef = new EntityDefImpl(oracle.jbo.server.EntityDefImpl.DEF_SCOPE_SESSION, "DynamicDeptEntityDef");
entDef.setFullName(entDef.getBasePackage() + ".dynamic." + entDef.getName());
entDef.setName(entDef.getName());
System.out.println("Application Module Path name: " + getDefFullName());
System.out.println("EntDef :" + entDef.getFileName() + " : " + entDef.getBasePackage() + ".dynamic." + entDef.getName());
entDef.setAliasName(entDef.getName());
entDef.setSource("DEPT");
entDef.setSourceType("table");
entDef.addAttribute("ID", "ID", Integer.class, true, false, true);
entDef.addAttribute("Name", "NAME", String.class, false, false, true);
entDef.addAttribute("Location", "LOCATION", Integer.class, false, false, true);
entDef.resolveDefObject();
entDef.registerSessionDefObject();
entDef.writeXMLContents();
entDef.saveXMLContents();
return entDef;
} catch (Exception ex) {
System.out.println(ex.getLocalizedMessage());
return null;
private ViewDefImpl buildDeptViewSessionDef(EntityDefImpl entityDef) {
try {
ViewDefImpl viewDef = new oracle.jbo.server.ViewDefImpl(oracle.jbo.server.ViewDefImpl.DEF_SCOPE_SESSION, "DynamicDeptViewDef");
viewDef.setFullName(viewDef.getBasePackage() + ".dynamic." + viewDef.getName());
System.out.println("ViewDef :" + viewDef.getFileName());
viewDef.setUseGlueCode(false);
viewDef.setIterMode(RowIterator.ITER_MODE_LAST_PAGE_FULL);
viewDef.setBindingStyle(SQLBuilder.BINDING_STYLE_ORACLE_NAME);
viewDef.setSelectClauseFlags(ViewDefImpl.CLAUSE_GENERATE_RT);
viewDef.setFromClauseFlags(ViewDefImpl.CLAUSE_GENERATE_RT);
viewDef.addEntityUsage("DynamicDeptUsage", entityDef.getFullName(), false, false);
viewDef.addAllEntityAttributes("DynamicDeptUsage");
viewDef.resolveDefObject();
viewDef.registerSessionDefObject();
viewDef.writeXMLContents();
viewDef.saveXMLContents();
return viewDef;
} catch (Exception ex) {
System.out.println(ex.getLocalizedMessage());
return null;
private void addViewToPdefApplicationModule(ViewDefImpl viewDef) {
oracle.jbo.server.PDefApplicationModule pDefAM = oracle.jbo.server.PDefApplicationModule.findDefObject(getDefFullName());
if (pDefAM == null) {
pDefAM = new oracle.jbo.server.PDefApplicationModule();
pDefAM.setFullName(getDefFullName());
pDefAM.setEditable(true);
pDefAM.createViewObject(DYNAMIC_DETP_VO_INSTANCE, viewDef.getFullName());
pDefAM.applyPersonalization(this);
pDefAM.writeXMLContents();
pDefAM.saveXMLContents();
////////adf-config.xml//////////////////////
<?xml version="1.0" encoding="windows-1252" ?>
<adf-config xmlns="http://xmlns.oracle.com/adf/config" xmlns:config="http://xmlns.oracle.com/bc4j/configuration" xmlns:adf="http://xmlns.oracle.com/adf/config/properties"
xmlns:sec="http://xmlns.oracle.com/adf/security/config">
<adf-adfm-config xmlns="http://xmlns.oracle.com/adfm/config">
<defaults useBindVarsForViewCriteriaLiterals="true"/>
<startup>
<amconfig-overrides>
<config:Database jbo.locking.mode="optimistic"/>
</amconfig-overrides>
</startup>
</adf-adfm-config>
<adf:adf-properties-child xmlns="http://xmlns.oracle.com/adf/config/properties">
<adf-property name="adfAppUID" value="TestDynamicEC-8827"/>
</adf:adf-properties-child>
<sec:adf-security-child xmlns="http://xmlns.oracle.com/adf/security/config">
<CredentialStoreContext credentialStoreClass="oracle.adf.share.security.providers.jps.CSFCredentialStore" credentialStoreLocation="../../src/META-INF/jps-config.xml"/>
</sec:adf-security-child>
<persistence-config>
<metadata-namespaces>
<namespace metadata-store-usage="mdsRepos" path="/sessiondef/"/>
<namespace path="/model/" metadata-store-usage="mdsRepos"/>
</metadata-namespaces>
<metadata-store-usages>
<metadata-store-usage default-cust-store="true" deploy-target="true" id="mdsRepos">
<metadata-store class-name="oracle.mds.persistence.stores.file.FileMetadataStore">
<property name="metadata-path" value="/tmp"/>
<!-- <metadata-store class-name="oracle.mds.persistence.stores.db.DBMetadataStore">
<property name="jndi-datasource" value="jdbc/TestDynamicEC"/>
<property name="repository-name" value="TestDynamicEC"/>
<property name="jdbc-userid" value="adfmay28"/>
<property name="jdbc-password" value="adfmay28"/>
<property name="jdbc-url" value="jdbc:oracle:thin:@localhost:1521:XE"/>-->
</metadata-store>
</metadata-store-usage>
</metadata-store-usages>
</persistence-config>
</adf-config>
//////////////////////////////////////////////////////////////////////////////////////////////////////////Hi Frank,
I m trying to save entity and view object xml by calling writeXMLContents() and saveXMLContents() so that these objects can be retrieved using the xmls later on.
These methods internally use MDS configuration in adf-config.xml, which is creating the issue.
Please share your thoughts on resolving this or if, there is any other way of creating dynamic entity/view objects for db tables created at runtime.
Nik -
Spanning Tree and Admin mac address issues srw2048
Ok, I have a somewhat complex problem and hopefully someone may shed some light or have an idea as to whats wrong.
First the scenario:
I have two Cisco Cat 6509's etherchanneled to each other via two fiber cables. One of these is the STP/RSTP root. I have two SRW2048's.. one trunked to each of these 6509 switches. There is also a trunk between the SRW2048's. All this is to create a redundant topology so that if one of the switches fail's the others can still forward packets to each other. Of course the scenario described is in fact a loop that should be handled by STP/RSTP. I have RSTP enabled on all the switches in the scenario (PV RSTP on the cisco switches as they only do Cisco's brand of per vlan spanning tree). There are 3 vlan's configured on each of the srw2048's (2,55,96). There are corresponding vlan's also on the 6509's. I have put the srw2048's management interface into vlan 2.
The problem:
I need to forward packets between the srw2048's primarily and only use the 6509 that is not the root when a failure happens. I have configured the non-root 6509's spanning tree cost on the etherchannel to be higher then the alternate path through the srw's to the root. I can hook everything up and view the spanning tree and see that the srw2048's interface that goes to the non-root 6509 is blocked, and all other interfaces on the other switches are forwarding. I can in fact ping and get to the admin interface on all the switches. Then for some strange reason the admin interface of the srw2048 plugged into the non-root 6509 stops responding. If I disable either the interface its plugged into on the 6509 or the other srw2048 everything starts working again. Sometimes it responds after many failures for no apparent reason. I looked into the mac-address table on the 6509's and they are conflicting, pointing to each other for the mac-address of the broken srw2048. When I clear the mac-table the admin port comes back for about 5 seconds then again goes dark. When reviewing mac-table on the 6509's they are back to pointing to each other. The odd thing (although I haven't confirmed this completely) is that hosts placed into vlan 2 on that same srw2048 seem to work fine. If there was an STP loop or something misconfigured, I would expect it to effect any host in vlan 2 or the other vlan's for that matter on the srw2048 that stops responding. Alas, I am stuck because I need to manage this switch remotely. My only thought is that for some reason even when the STP status is blocked the broken srw2048 is still sending out arp's of its admin interface and bypassing the STP protocol. I have no way to confirm this, but maybe someone has an idea as to what I'm doing wrong, or otherwise offer a solution. For now, I simply removed vlan 2 from the 6509 that the broken srw2048 is plugged into and everything seems fine.
My apologies for such a long post, but this is somewhat complicated. Thanks in advance for any info.
-Geoff
Message Edited by gmyers on 08-19-2008 10:35 PMTo follow up, I had a ticket open with Linksys about this for about 3 months with no resolution. I submitted packet captures, stp outputs, etc and no luck. I gave up and basically had to revert to a manual failover for redundancy. It's no perfect or fast, but it works every time.
Unless linksys issues a firmware upgrade with this as a fix, I doubt we will be able to ever resolve this on our own. -
Dynamic loading tree and data grid
Hi All,
I new to java as well as JSF. I am very impressed with the jsf and Sun Java Creator IDE. I made a sample project.
Now I want to load tree and data grid with dynamic values how can I achieve this.
Please help to find out some examples.
Also I need to know who I can use SOAP call using JSF.
Thanks
CSCSTo dynamically load a Basic Table (ui:table) from a database, see http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/databoundcomponents.html
To dynamically load a Basic Table from other sources of data that are loaded into an array or such, see http://blogs.sun.com/roller/page/divas?entry=table_component_sample_project
To dynamically CREATE a Basic Table, see http://developers.sun.com/prodtech/javatools/jscreator/reference/tips/2/createTableDynamically.html and http://developers.sun.com/prodtech/javatools/jscreator/reference/tips/2/add_component_to_table.html
To dynamically create an HTML table on the fly, see section 7.5 in Chapter 7 of the Field Guide at http://developers.sun.com/prodtech/javatools/jscreator/learning/bookshelf/index.html
To dynamically create a tree, see Dynamic Tree example at http://developers.sun.com/prodtech/javatools/jscreator/reference/index.jsp.
A tutorial for dynamically creating a tree from a database is work in progress.
Hope this helps,
Chris -
Custom.xss and dynamic tree
I am updating custom.xss in R12 OA_HTML/cabo/styles to change the colors and fonts for the configurator runtime look and feel. I am running into a problem .. oracle is using images ( and not colors ) for the bottom part and the border of dynamic tree / side menu .. how do I change these images ? is it possible to change these using styles ??
urgent response would be really reappreciated. !!Images are in /OA_MEDIA directory. In jedv they are in your home directory under myhtml.
-
Netui:tree and portal problem?
I may have found a problem regarding using netui:tree & netui:treenode tags in
a pageflow when that pageflow is placed in a portlet in a portal.
The problem is that expanding and contracting the nodes does not
work in this case....(it does work when the pageflow is NOT placed in a portal.)
I have drilled down on this a bit to see what was happening. Here are my impressions.
This line of code (taken from the page flow taken from the supplied tree tutorial):
[nodeExpanded = getRequest().getParameter(TreeNode.EXPAND_NODE);]
is used to get a refence to the node that was clicked
The constant
[TreeNode.EXPAND_NODE]
equates to the string "netui_treenode".
In the working case (outside of the portal) this parameter and its value
are received in the request passed to the page flow. (and can be used to
change the state of the tree node).
But when running the tree pageflow in the portal (does not work), this parameter
does not exist in the request received by the page flow.
If you examine the html of the tree while running in the portlet and search for
the
string "netui_treenode", you will find that the urls for the node expansion contain
this
parameter (as they should) ....but for some reason this parameter and its value
never get
through the page flow method.
This is the cause of the problem.
Any ideas?This issue is fixed in 8.1 sp3, or if you need a patch for 8.1 sp2, contact support
and ask for the patch for CR129990.
-tanya
"gerry rodman" <[email protected]> wrote:
>
I may have found a problem regarding using netui:tree & netui:treenode
tags in
a pageflow when that pageflow is placed in a portlet in a portal.
The problem is that expanding and contracting the nodes does not
work in this case....(it does work when the pageflow is NOT placed in
a portal.)
I have drilled down on this a bit to see what was happening. Here are
my impressions.
This line of code (taken from the page flow taken from the supplied tree
tutorial):
[nodeExpanded = getRequest().getParameter(TreeNode.EXPAND_NODE);]
is used to get a refence to the node that was clicked
The constant
[TreeNode.EXPAND_NODE]
equates to the string "netui_treenode".
In the working case (outside of the portal) this parameter and its value
are received in the request passed to the page flow. (and can be used
to
change the state of the tree node).
But when running the tree pageflow in the portal (does not work), this
parameter
does not exist in the request received by the page flow.
If you examine the html of the tree while running in the portlet and
search for
the
string "netui_treenode", you will find that the urls for the node expansion
contain
this
parameter (as they should) ....but for some reason this parameter and
its value
never get
through the page flow method.
This is the cause of the problem.
Any ideas? -
Dynamic tree UI element in the view
Dear All,
Can anyone provide me with the code snippet for Dynamic Tree UI element in the view. I need to show the tree which should be generated dynamically.
Thanks alot in advance!
Points will be rewarded, Please its urgent!
Cheers,
Darshna.Hi ,
sorry for the late reply... here is the code for onActionLoadchildren .. i am sure you wont understand this.. but lets try...
DATA:
element_parent TYPE REF TO if_wd_context_element,
lv_object_key1 type string,
lv_object_type type string.
DATA:
node_root_entry TYPE REF TO if_wd_context_node,
elem_root_entry TYPE REF TO if_wd_context_element,
stru_root_entry TYPE if_structure_view_new=>element_root_entry ,
item_valid_from LIKE stru_root_entry-valid_from,
item_plant LIKE stru_root_entry-plant,
item_equi_key LIKE stru_root_entry-equi_key,
item_object_key LIKE stru_root_entry-object_key,
item_object_type TYPE string,
item_path TYPE string,
item_parent_path TYPE string,
context_node TYPE REF TO if_wd_context_node,
root_entry TYPE if_structure_view_new=>element_selected_entry.
l_ref_componentcontroller TYPE REF TO ig_componentcontroller.
DATA:
node_root_info TYPE REF TO if_wd_context_node,
elem_root_info TYPE REF TO if_wd_context_element,
stru_root_info TYPE if_structure_view_new=>element_root_info .
DATA:
element TYPE REF TO if_wd_context_element,
node_selected_entry TYPE REF TO if_wd_context_node,
elem_selected_entry TYPE REF TO if_wd_context_element.
DATA:
ls_hier_return TYPE rplm_ts_struc_elements,
lt_hier_return TYPE TABLE OF rplm_ts_struc_elements,
ls_hier_return_temp TYPE rplm_ts_struc_elements,
lt_hier_return_temp TYPE TABLE OF rplm_ts_struc_elements,
ls_hier_level TYPE rplm_ts_hier_level,
lt_hier_level TYPE TABLE OF rplm_ts_hier_level,
ls_hier_return_sort TYPE rplm_mt_ts_hier,
lt_hier_return_sort TYPE TABLE OF rplm_mt_ts_hier.
DATA:
temp_hier_level TYPE if_structure_view_new=>element_hier_level,
lt_hier_temp TYPE TABLE OF if_structure_view_new=>element_hier_level,
lt_temp TYPE TABLE OF if_structure_view_new=>element_hier_level.
DATA:
lc_path TYPE string,
lv_object_key TYPE string.
DATA:
lv_hier_lines TYPE i.
DATA:
node_entries TYPE REF TO if_wd_context_node,
node_sub_entries TYPE REF TO if_wd_context_node,
elem_sub_entries TYPE REF TO if_wd_context_element,
stru_sub_entries TYPE if_structure_view_new=>element_sub_entries .
TYPES: BEGIN OF ls_hier_type, "structure for Hierarchy table
object(31) TYPE c, "Objectkey
predecessor(31) TYPE c, "Objectkey Predecessor
data(2000) TYPE c, "Data container
level TYPE i, "level of object in tree
successors(1) TYPE c, "Object has successors: YES/NO/U
display(1) TYPE c, "Object is displayed: YES/NO
selected(1) TYPE c, "Object is selected/marked: YES/NO
index_predec LIKE sy-tabix, "Index predecessor
strno TYPE ilom_strno,"External number for func. loc.
"in BOMs used for top object
END OF ls_hier_type.
DATA:
ls_hier TYPE ls_hier_type,
lt_hier TYPE TABLE OF ls_hier_type WITH DEFAULT KEY,
lt_mat_hier TYPE TABLE OF ls_hier_type WITH DEFAULT KEY.
" For retrieving Material Data Heirarchy
DATA:
lh_stpo_tab TYPE TABLE OF rihstpx ,
lwa_stpo_tab LIKE LINE OF lh_stpo_tab,
check_menge TYPE string ,
check_meins TYPE string ,
lwa_mat_hier LIKE LINE OF lt_mat_hier ,
lt_dup_mat_hier LIKE lt_mat_hier,
lv_len TYPE i,
lv_len_temp TYPE i .
DATA:
lv_equnr TYPE equi-equnr,
lv_tplnr TYPE iflo-tplnr,
lv_matnr TYPE mast-matnr.
DATA:
lv_cnt TYPE i,
lv_index TYPE i.
DATA:
lv_path TYPE string,
lv_parent_path TYPE string,
pos TYPE string,
separator TYPE c VALUE '.',
max_level TYPE i,
temp_level TYPE i,
counter TYPE i VALUE 1.
TYPES: BEGIN OF ls_pred_type, "structure for Hierarchy table
parent(31) TYPE c, "Objectkey Predecessor
path(2000) TYPE c, "Data container
index_predec LIKE sy-tabix, "Index predecessor
END OF ls_pred_type.
DATA:
ls_pred TYPE ls_pred_type,
lt_pred TYPE TABLE OF ls_pred_type WITH DEFAULT KEY.
DATA:
lv_int_obj_key TYPE string,
obj_len TYPE i,
lv_funcloc_ext TYPE ilom_strno,
lv_funcloc TYPE itob-tplnr.
DATA:
lv_level TYPE i,
lv_temp TYPE i,
lt_path_entries TYPE string_table.
DATA:
node_general TYPE REF TO if_wd_context_node,
elem_general TYPE REF TO if_wd_context_element,
stru_general TYPE if_structure_view_new=>element_general ,
item_collapse_visibility LIKE stru_general-collapse_visibility.
DATA:
elem_context TYPE REF TO if_wd_context_element,
stru_context TYPE if_structure_view_new=>element_context ,
item_expand_all LIKE stru_context-expand_all.
lv_path = path.
Get Element whose children shall be loaded
element_parent = wd_context->path_get_element( lv_path ).
element_parent->get_attribute(
EXPORTING
name = `OBJECT_KEY`
IMPORTING
value = LV_object_key ).
element_parent->get_attribute(
EXPORTING
name = `OBJECT_TYPE`
IMPORTING
value = lv_object_type ).
node_root_entry = wd_context->get_child_node( name = wd_this->wdctx_root_entry ).
get element via lead selection
elem_root_entry = node_root_entry->get_element( ).
get single attribute
elem_root_entry->get_attribute(
EXPORTING
name = `VALID_FROM`
IMPORTING
value = item_valid_from ).
elem_root_entry->get_attribute(
EXPORTING
name = `PLANT`
IMPORTING
value = item_plant ).
item_object_type = lv_object_type.
if lv_object_type eq 'EQUI'.
item_object_key = ''.
item_equi_key = lv_object_key.
elseif lv_object_type eq 'FUNCLOC'.
item_object_key = lv_object_key.
item_equi_key = ''.
ELSE.
lv_matnr = lv_object_key.
For BOM, material and Assembly
endif.
IF item_object_type EQ 'EQUI'.
lv_equnr = lv_object_key.
ELSEif item_object_type eq 'FUNCLOC'.
lv_tplnr = lv_object_key.
ELSE.
LV_MATNR = lv_object_key.
exit.
ENDIF.
CALL FUNCTION 'PM_HIERARCHY_CALL'
EXPORTING
datum = item_valid_from
equnr = lv_equnr
tplnr = lv_tplnr
matnr = lv_matnr
levdo = '99'
levup = '00'
sanin = 'X'
select_equi = 'X'
select_iflo = 'X'
select_stpo = 'X'
selmod = 'D'
stkkz = ''
werks = item_plant
with_equi = 'X'
with_equi_hier = 'X'
with_iflo_hier = 'X'
with_btyp = 'X'
with_mara = 'X'
with_ibase_hier = ''
capid = ''
emeng = 0
IMPORTING
et_hier = lt_hier
EXCEPTIONS
no_hierarchy = 1
no_object_defined = 2
no_selection = 3
no_valid_equnr = 4
no_valid_matnr = 5
no_valid_selmod = 6
no_valid_tplnr = 7
OTHERS = 8.
LOOP AT lt_hier INTO ls_hier.
ls_hier_return-object_key = ls_hier-object.
ls_hier_level-object_key = ls_hier-object.
ls_hier_level-predecessor = ls_hier-predecessor.
lv_len = strlen( ls_hier-object ).
IF lv_len GT 1.
lv_len_temp = lv_len - 1.
ELSEIF
lv_len_temp = lv_len.
ENDIF.
ls_hier_level-level = ls_hier-level.
IF ls_hier-object(1) = 'T'.
ls_hier_return-icon = 'ICON_TECHNICAL_PLACE'.
ls_hier_return-object_type = 'FUNCLOC'.
IF ls_hier-successors = 'Y'.
ls_hier_return-is_leaf = abap_false.
ls_hier_return-is_expanded = abap_false.
ls_hier_return-children_loaded = abap_true.
ELSE.
ls_hier_return-is_leaf = abap_true.
ls_hier_return-is_expanded = abap_true.
ls_hier_return-children_loaded = abap_true.
ENDIF.
ELSEIF ls_hier-object(1) = 'E'.
ls_hier_return-icon = 'ICON_EQUIPMENT'.
ls_hier_return-object_type = 'EQUI'.
IF ls_hier-successors = 'Y'.
ls_hier_return-is_leaf = abap_false.
ls_hier_return-is_expanded = abap_false.
ls_hier_return-children_loaded = abap_true.
ELSE.
ls_hier_return-is_leaf = abap_true.
ls_hier_return-is_expanded = abap_true.
ls_hier_return-children_loaded = abap_true.
ENDIF.
ELSEIF ls_hier-object+lv_len_temp(1) = 'M'.
ls_hier_return-icon = 'ICON_MATERIAL'.
ls_hier_return-object_type = 'MATERIAL'.
IF ls_hier-successors = 'Y'.
ls_hier_return-is_leaf = abap_false.
ls_hier_return-is_expanded = abap_false.
ls_hier_return-children_loaded = abap_false.
ELSE.
ls_hier_return-is_leaf = abap_true.
ls_hier_return-is_expanded = abap_true.
ls_hier_return-children_loaded = abap_true.
ENDIF.
ELSEIF ls_hier-object+lv_len_temp(1) = 'X'.
ls_hier_return-icon = 'ICON_SUPPLY_AREA'.
ls_hier_return-object_type = 'MATBOM'.
IF ls_hier-successors = 'Y'.
ls_hier_return-is_leaf = abap_false.
ls_hier_return-is_expanded = abap_false.
ls_hier_return-children_loaded = abap_false.
ELSE.
ls_hier_return-is_leaf = abap_true.
ls_hier_return-is_expanded = abap_true.
ls_hier_return-children_loaded = abap_true.
ENDIF.
ELSEIF ls_hier-object+lv_len_temp(1) = 'A'.
ls_hier_return-icon = 'ICON_MATERIAL_REVISION'.
ls_hier_return-object_type = 'MATERIAL'.
IF ls_hier-successors = 'Y'.
ls_hier_return-is_leaf = abap_false.
ls_hier_return-is_expanded = abap_false.
ls_hier_return-children_loaded = abap_false.
ELSE.
ls_hier_return-is_leaf = abap_true.
ls_hier_return-is_expanded = abap_true.
ls_hier_return-children_loaded = abap_true.
ENDIF.
ENDIF.
*IF ls_hier-predecessor EQ item_object_key OR ls_hier-object EQ item_object_key.
APPEND ls_hier_return TO lt_hier_return.
APPEND ls_hier_level TO lt_hier_level.
*ENDIF.
CLEAR lv_len.
CLEAR lv_len_temp.
ENDLOOP.
lt_hier_return_temp = lt_hier_return.
DESCRIBE TABLE lt_hier LINES lv_hier_lines.
IF lv_hier_lines EQ 0.
elem_selected_entry = wd_context->path_get_element( '1.ENTRIES.1' ).
Get children node
elem_selected_entry->set_attribute(
value = abap_true
name = 'IS_LEAF' ).
ENDIF.
*************************************Deleting Now***********
SORT lt_hier_level BY level DESCENDING.
LOOP AT lt_hier_level INTO ls_hier_level.
max_level = ls_hier_level-level.
EXIT.
ENDLOOP.
SORT lt_hier_level BY level ASCENDING.
LOOP AT lt_hier_level INTO ls_hier_level WHERE level EQ 0.
ls_hier_level-path = '1.ENTRIES.1'.
ls_hier_level-parent_path = '1.ENTRIES.1'.
MODIFY lt_hier_level FROM ls_hier_level.
ENDLOOP.
************************New design to Generate Path and Parent path
lv_cnt = 0.
temp_level = 1.
SORT lt_hier_level BY object_key ASCENDING.
LOOP AT lt_hier_level INTO ls_hier_level WHERE level EQ 1.
lv_cnt = lv_cnt + 1.
lv_parent_path = '1.ENTRIES.1'.
ls_hier_level-parent_path = lv_parent_path.
pos = lv_cnt.
CONCATENATE lv_parent_path separator 'SUB_ENTRIES' separator pos INTO lv_path.
ls_hier_level-path = lv_path.
MODIFY lt_hier_level FROM ls_hier_level.
ENDLOOP.
temp_level = 1.
lv_cnt = 0.
*********************Need to call this for each level ***************************
WHILE temp_level LT max_level.
CLEAR lt_pred.
CLEAR ls_pred.
LOOP AT lt_hier_level INTO ls_hier_level WHERE level EQ temp_level.
ls_pred-parent = ls_hier_level-object_key.
ls_pred-path = ls_hier_level-path.
APPEND ls_pred TO lt_pred.
ENDLOOP.
SORT lt_pred BY parent.
DELETE ADJACENT DUPLICATES FROM lt_pred.
LOOP AT lt_pred INTO ls_pred.
lv_cnt = 0.
LOOP AT lt_hier_level INTO ls_hier_level WHERE predecessor EQ ls_pred-parent.
lv_cnt = lv_cnt + 1.
lv_parent_path = ls_pred-path.
ls_hier_level-parent_path = lv_parent_path.
lv_path = ''.
pos = lv_cnt.
CONCATENATE lv_parent_path separator 'SUB_ENTRIES' separator pos INTO lv_path.
ls_hier_level-path = lv_path.
MODIFY lt_hier_level FROM ls_hier_level.
ENDLOOP.
ENDLOOP.
temp_level = temp_level + 1.
ENDWHILE.
LOOP AT lt_hier_level INTO ls_hier_level.
LOOP AT lt_hier_return INTO ls_hier_return.
IF ls_hier_level-object_key = ls_hier_return-object_key.
MOVE-CORRESPONDING ls_hier_level TO ls_hier_return.
MODIFY lt_hier_return FROM ls_hier_return.
ENDIF.
ENDLOOP.
ENDLOOP.
SORT lt_hier_return BY path ASCENDING.
**************************Delete the extra first character returned by PM_HIERARCHY_CALL******
LOOP AT lt_hier_return INTO ls_hier_return.
IF ls_hier_return-object_key(1) = 'T'.
SHIFT ls_hier_return-object_key BY 1 PLACES.
lv_object_key = ls_hier_return-object_key.
lv_funcloc_ext = lv_object_key.
CALL FUNCTION 'CONVERSION_EXIT_TPLNR_OUTPUT'
EXPORTING
input = lv_funcloc_ext
IMPORTING
output = lv_funcloc.
lv_int_obj_key = lv_funcloc.
ls_hier_return-object_key = lv_int_obj_key.
ELSEIF ls_hier_return-object_key(1) = 'E'.
SHIFT ls_hier_return-object_key BY 1 PLACES.
lv_object_key = ls_hier_return-object_key.
obj_len = strlen( lv_object_key ).
IF obj_len GE 18.
lv_object_key = lv_object_key+0(18).
ENDIF.
wd_comp_controller->conv_ext_2_int(
EXPORTING
iv_object_key_ext = lv_object_key " String
iv_object_type = 'EQUI' " String
IMPORTING
ev_object_key = lv_int_obj_key " String
SHIFT lv_int_obj_key LEFT DELETING LEADING '0'.
ls_hier_return-object_key = lv_int_obj_key.
ELSE.
SHIFT ls_hier_return-object_key BY 1 PLACES.
lv_object_key = ls_hier_return-object_key.
obj_len = strlen( lv_object_key ).
IF obj_len GE 18.
lv_object_key = lv_object_key+0(18).
ENDIF.
SHIFT lv_object_key LEFT DELETING LEADING '0'.
ls_hier_return-object_key = lv_object_key.
ENDIF.
MODIFY lt_hier_return FROM ls_hier_return TRANSPORTING object_key object_key.
ENDLOOP.
LOOP AT lt_hier_level INTO ls_hier_level.
IF ls_hier_level-object_key(1) = 'T'.
SHIFT ls_hier_level-object_key BY 1 PLACES.
lv_object_key = ls_hier_level-object_key.
lv_funcloc_ext = lv_object_key.
CALL FUNCTION 'CONVERSION_EXIT_TPLNR_OUTPUT'
EXPORTING
input = lv_funcloc_ext
IMPORTING
output = lv_funcloc.
lv_int_obj_key = lv_funcloc.
ls_hier_level-object_key = lv_int_obj_key.
ELSEIF ls_hier_level-object_key(1) = 'E'.
SHIFT ls_hier_level-object_key BY 1 PLACES.
lv_int_obj_key = ls_hier_level-object_key.
obj_len = strlen( lv_int_obj_key ).
IF obj_len GE 18.
lv_int_obj_key = lv_int_obj_key+0(18).
ENDIF.
wd_comp_controller->conv_ext_2_int(
EXPORTING
iv_object_key_ext = lv_int_obj_key " String
iv_object_type = 'EQUI' " String
IMPORTING
ev_object_key = lv_int_obj_key " String
SHIFT lv_int_obj_key LEFT DELETING LEADING '0'.
ls_hier_level-object_key = lv_int_obj_key.
ELSE.
SHIFT ls_hier_level-object_key BY 1 PLACES.
lv_int_obj_key = ls_hier_level-object_key.
obj_len = strlen( lv_int_obj_key ).
IF obj_len GE 18.
lv_int_obj_key = lv_int_obj_key+0(18).
ENDIF.
SHIFT lv_int_obj_key LEFT DELETING LEADING '0'.
ls_hier_level-object_key = lv_int_obj_key.
ENDIF.
MODIFY lt_hier_level FROM ls_hier_level TRANSPORTING object_key object_key.
ENDLOOP.
*********************Getinfo if root node else call Get_Children_Info to generate the structure as well*******
IF lv_path EQ '1.ENTRIES.1'.
element = wd_context->path_get_element( lv_path ).
navigate from <ENTRIES> to <SUB_ENTRIES> via lead selection
node_sub_entries = element->get_child_node( name = 'SUB_ENTRIES' ).
element->get_attribute( EXPORTING name = 'OBJECT_KEY'
IMPORTING value = item_object_key ).
element->get_attribute( EXPORTING name = `OBJECT_TYPE`
IMPORTING value = item_object_type ).
****************Get Info of Technical Objects*************
wd_comp_controller->get_children_info(
EXPORTING
iv_lt_list = lt_hier_return " Rplm_Tt_Mt_Struc
iv_path = ''
iv_hier_level = lt_hier_level
IMPORTING
ev_lt_full = lt_hier_return " Rplm_Tt_Mt_Struc
Create the strcuture by binding the entries to Node which is bound to the table
element = wd_context->path_get_element( lc_path ).
Get children node
node_sub_entries = element->get_child_node( 'SUB_ENTRIES' ).
CALL METHOD node_sub_entries->bind_table
EXPORTING
new_items = lt_hier_return
set_initial_elements = abap_true.
@TODO handle not set lead selection
IF ( node_entries IS INITIAL ).
ENDIF.
lv_temp = 1.
***************Sort the LT_HIER_TABLE appropriately ******
LOOP AT lt_hier_return INTO ls_hier_return .
MOVE-CORRESPONDING ls_hier_return TO ls_hier_return_sort.
ls_hier_return_sort-path_length = strlen( ls_hier_return_sort-path ).
APPEND ls_hier_return_sort TO lt_hier_return_sort.
ENDLOOP.
SORT lt_hier_return_sort BY path_length ASCENDING path ASCENDING.
CLEAR lt_hier_return.
LOOP AT lt_hier_return_sort INTO ls_hier_return_sort.
MOVE-CORRESPONDING ls_hier_return_sort TO ls_hier_return.
APPEND ls_hier_return TO lt_hier_return.
ENDLOOP.
*wd_comp_controller->gv_master_data = lt_hier_return.
LOOP AT lt_hier_return INTO ls_hier_return.
lv_path = ls_hier_return-path.
lc_path = ls_hier_return-parent_path.
IF lv_path NE '1.ENTRIES.1'.
element = wd_context->path_get_element( lc_path ).
Get children node
node_sub_entries = element->get_child_node( 'SUB_ENTRIES' ).
Now, create the children elements
element->get_attribute( EXPORTING name = 'OBJECT_KEY'
IMPORTING value = ls_hier_level-predecessor ).
Create the strcuture by binding the entries to Node which is bound to the table
CALL METHOD node_sub_entries->bind_structure
EXPORTING
new_item = ls_hier_return
set_initial_elements = abap_false.
ENDIF.
ENDLOOP.
Only when a new level is reached we create one more child node
else we attach our elements to same child node
element = wd_context->path_get_element( item_path ).
Get children node
element->set_attribute(
value = abap_false
name = 'IS_EXPANDED' ).
ENDIF.
navigate from <CONTEXT> to <GENERAL> via lead selection
node_general = wd_context->get_child_node( name = wd_this->wdctx_general ).
get element via lead selection
elem_general = node_general->get_element( ).
get single attribute
elem_general->set_attribute(
name = `COLLAPSE_VISIBILITY`
value = abap_false ).
node_selected_entry = wd_context->get_child_node( name = if_structure_view_new=>wdctx_selected_entry ).
get element via lead selection
elem_selected_entry = node_selected_entry->get_element( ).
get single attribute
elem_selected_entry->set_attribute(
name = `OBJECT_KEY`
value = '' ).
elem_selected_entry->set_attribute(
name = `OBJECT_TYPE`
value = '' ).
get element via lead selection
elem_context = wd_context->get_element( ).
get single attribute
elem_context->set_attribute(
name = `EXPAND_ALL`
value = abap_false ).
wd_this->enable_buttons(
endmethod. -
Problem in tabular form based on dynamic view and pagination
Hi All,
I have a manual tabular form based on a dynamic view. The view fetches the records based on search criteria given by the user in all cases. But this view fetches ALL records when user clicks on pagination, without considering the search criteria. This is the problem I am facing.
I am doing the following:
Since tabular form does not support pl/sql function returning query, I cannot use a table directly. I need my results based on search criteria selected by user. Hence I created a dynamic view and used a "INSTEAD OF UPDATE" trigger to update the table.
I use a set bind variables procedure, on load before header for setting the variables.
This view fetches the correct data based on user search always. It creates a problem only in one situation, when using pagination in the report.
The example can be found at:
http://apex.oracle.com/pls/otn/f?p=19399:1:
username = [email protected]
pwd = kishore
Here if "manager name" is entered as test, we get 5 records in "Summary of requests" report and 5 records in "Inactive Requests" report. When user clicks on Pagination in any of the reports, ALL the 7 records get fetched in "Summary of Requests" and 6 records in "Inactive Requests". How can I overcome this problem?? The report must consider the search variables even when pagination occurs.
Is this because, the inbuilt "html_PPR_Report_Page" executes the region query once again by considering all search variables as NULL?
Backend Code is at:
http://apex.oracle.com/pls/otn/
workspace: sekhar.nooney
Username :[email protected]
pwd: kishore
application id = 19399
My region code is something like:
select *
from regadm_request_v
where access_type = :F110_REGADM
and status <> 'INACTIVE'
order by request_id
My view code is:
CREATE OR REPLACE VIEW REGADM_REQUEST_V
AS
SELECT *
FROM REGREGOWNER.REGADM_REQUEST
WHERE upper(employee_name) LIKE '%'||nvl(upper(REGADM_REQUEST_PKG.GET_EMPLOYEE_NAME),'%')||'%'
AND upper(manager_name) LIKE '%'||nvl(upper(REGADM_REQUEST_PKG.GET_MANAGER_NAME),'%')||'%'
AND upper(employee_sunetid) LIKE '%'||nvl(upper(REGADM_REQUEST_PKG.GET_EMPLOYEE_SUNET_ID),'%')||'%'
AND upper(manager_sunetid) LIKE '%'||nvl(upper(REGADM_REQUEST_PKG.GET_MANAGER_SUNET_ID),'%')||'%'
AND upper(request_date) LIKE '%'||nvl(upper(REGADM_REQUEST_PKG.GET_REQUEST_DATE),'%')||'%'
AND upper(USAGE_AGREEMENT_RECVD) LIKE '%'||nvl(upper(DECODE(REGADM_REQUEST_PKG.GET_USAGE_AGREMNT_RECVD,'~!@',NULL,REGADM_REQUEST_PKG.GET_USAGE_AGREMNT_RECVD)),'%')||'%'
AND upper(STATUS) LIKE '%'||nvl(upper(DECODE(REGADM_REQUEST_PKG.GET_STATUS,'~!@',NULL,REGADM_REQUEST_PKG.GET_STATUS)),'%')||'%'
AND upper(REQUEST_APPROVED) LIKE '%'||nvl(upper(DECODE(REGADM_REQUEST_PKG.GET_REQUEST_APPROVED,'~!@',NULL,REGADM_REQUEST_PKG.GET_REQUEST_APPROVED)),'%')||'%'
AND upper(nvl(APPROVAL_DATE,sysdate)) LIKE '%'||nvl(upper(REGADM_REQUEST_PKG.GET_APPROVED_DATE),'%')||'%'
AND upper(APRVL_REQUEST_SENT) LIKE '%'||nvl(upper(DECODE(REGADM_REQUEST_PKG.GET_EMAIL_APPROVERS,'~!@',NULL,REGADM_REQUEST_PKG.GET_EMAIL_APPROVERS)),'%')||'%'
AND upper(NOTIFY_APPROVED) LIKE '%'||nvl(upper(DECODE(REGADM_REQUEST_PKG.GET_APPROVAL_NOTIFICATION,'~!@',NULL,REGADM_REQUEST_PKG.GET_APPROVAL_NOTIFICATION)),'%')||'%'
I would be glad for any suggestions.
Andy/Varad any ideas? You both helped me a lot on my problems for the same application that I had faced before in More Problems in Tabular form - Please give me suggestions.
Thanks,
SumanaHi Andy,
The view and the package for setting bind variables work properly in my entire application other than the pagination. A pity that I came across this only now :(
I have used this same method for holding variables in another application before, where I needed to print to PDF. I used this approach in the other application because my queries were not within the APEX character limit specified for the "SQL Query of Report Query shared component".
In this application, I initially had to fetch values from 2 tables and update the 2 tables. Updateable form works only with one table right? Hence I had created a view. Later the design got changed to include search and instead of changing the application design I just changed the view then. Still later, my clients merged the 2 tables. Once again I had just changed my view.
Now, I wanted to know if any method was available for the pagination issue (using the view itself). Hence I posted this.
But as you suggested, I think it is better to change the page design quickly (as it would be much easier).
If I change the region query to use the table and the APEX bind parameters in the where clause as:
SELECT *
FROM REGADM_REQUEST
WHERE upper(employee_name) LIKE '%'||nvl(upper(:P1_EMPLOYEE_NAME),'%')||'%' .....
I also changed the ApplyMRU to refer to the table.
Here the pagination issue is resolved. But here the "last Update By" and "Last Update Date" columns do not get updated with "SYSDATE" and "v(APP_USER)" values, when update takes place. Even if I make the columns as readonly text field, I am not sure how I can ensure that SYSDATE and v('APP_uSER') can be passed to the columns. Any way I can ensure this? Please have a look at the issue here: http://apex.oracle.com/pls/otn/f?p=19399:1:
I have currently resolved the "last update" column issue by modifying my view as:
CREATE OR REPLACE VIEW REGADM_REQUEST_V
AS
SELECT *
FROM REGADM_REQUEST
I modified my region query to use APEX bind parameters itself as:
SELECT *
FROM REGADM_REQUEST_V
WHERE upper(employee_name) LIKE '%'||nvl(upper(:P1_EMPLOYEE_NAME),'%')||'%' .....
And I use the "INSTEAD OF UPDATE" trigger that I had initially written for update. The code is:
CREATE OR REPLACE TRIGGER REGADM_REQUEST_UPD_TRG
INSTEAD OF UPDATE
ON REGADM_REQUEST_V
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
BEGIN
UPDATE REGREGOWNER.REGADM_REQUEST
SET MANAGER_EMAIL = :NEW.MANAGER_EMAIL
, EMPLOYEE_EMAIL = :NEW.EMPLOYEE_EMAIL
, STATUS_UPDATE_DATETIME = SYSDATE
, USER_UPDATE_ID = (SELECT v('APP_USER') FROM DUAL)
WHERE REQUEST_ID = :OLD.REQUEST_ID;
END;
Please let me know how I can resolve the "last update" column issue using the table itself. (Just for my learning)
Thanks,
Sumana -
Hi, i'm hoping somebody can please help me.
I have been using VOIP via a softphone for a couple of years now, I decided that I wanted to have a go at setting up a Cisco phone. So I have got a 7940G second hand which works fine. I am a home user trying to learn so I am using a BT Homehub with dynamic IP and SIP on voip-talk.org
The phone was still configured form the previous owner with subnet, DNS, FTP, VLAN etc. I couldn't find a how to edit these settings, so I thought if I set it back to factory defaults, told it to delete network cfg. I thought on restarting it might ask me to input the detail? but it showing "configuring VLAN" and then constantly stays on "configuring IP"
although it stills picks up an IP via DHCP and I can ping it ok, I can also browse on to the web interface which show the following info
DEVICE INFO:
MAC Address 00137FA9D10B
Host Name SEP00137FA9D10B
Phone DN
App Load ID P00307020400
Boot Load ID PC0303010100
Version 7.2(4.0)
Expansion Module 1
Expansion Module 2
Hardware Revision 4.4
Serial Number INM09101LK3
Model Number CP-7940G
Codec ADLCodec
Amps 5V Amp
C3PO Revision 2
Message Waiting NO
NETWORK CONFIG:
DHCP Server 192.168.1.254
BOOTP Server Yes
MAC Address 00137FA9D10B
Host Name SEP00137FA9D10B
Domain Name home
IP Address 192.168.1.68
Subnet Mask 255.255.255.0
TFTP Server 1
Default Router 1 192.168.1.254
Default Router 2
Default Router 3
Default Router 4
Default Router 5
DNS Server 1 192.168.1.254
DNS Server 2
DNS Server 3
DNS Server 4
DNS Server 5
Operational VLAN Id
Admin. VLAN Id
CallManager 1
CallManager 2
CallManager 3
CallManager 4
CallManager 5
Information URL
Directories URL
Messages URL
Services URL
DHCP Enabled No
DHCP Address Released Yes
Alternate TFTP Yes
Erase Configuration NO
Forwarding Delay YES
Idle URL
Idle URL Timer 0
Authentication Url
Proxy Server Url
PC Port Disabled YES
SW Port Configuration AUTO
PC Port Configuration AUTO
TFTP Server 2
User Locale
Network Locale
Handset Only Mode No
User Locale Version
Network Locale Version
GARP Enabled Yes
Voice VLAN Enabled Yes
Auto Line Select Enabled No
Video Capability Enabled No
DSCP For Call Control default
DSCP For Configuration default
DSCP For Services default
Security Mode Non Secure
Web Access Enabled
Connection Monitor Duration 0
PC VLAN
Basically I need to know first all how to at least change the settings, as I don't have access via the phone itself or the web interface. And I will probibly also need to reflash the firmware with something that will do SIP.
Thanks for looking and your helpHi
I think the main issue you have with this phone is that its not picking up a TFTP server IP address and therefore cannot download any configuration details.
As a start i'd check that the IP address range that it has got via DHCP has an option 150 setup to your CUCM TFTP server.
Once its got this, if you have auto registration setup if should at least boot up
Hope this helps
PKS -
How to pass values in dynamic structure and then dynamic table
Hi,
we have a Z structure in se11 holding 10 fields. But at run time i need to create a dynamic table with more than 10 records.
I am able to create the structure and corresponding internal table. Now the issue is i have to populate this dynamic structure with some values and then append it to dynamic internal table. Since the dynamic table type is any its not allowing an index operation like modify etc etc.
Could anyone help me in passing the values . I have searched in SDN . everyone created a dynamic table and then populated it values from some standard or custom tables.Then assigning the component of structure and displaying the output. but in my situation i have no such values stored in any tables. i populate values based on certain calculation.Hi Friends,
This is the piece of code.After creating dynamic work area and dynamic table what i should do?
TYPES: BEGIN OF STR,
ID TYPE I,
NAME(30) TYPE C,
END OF STR.
data: v_lines type i.
STR_TYPE ?= CL_ABAP_TYPEDESCR=>DESCRIBE_BY_NAME( 'STR' ).
STR_COMP = STR_TYPE->GET_COMPONENTS( ).
APPEND LINES OF STR_COMP TO COMP_TAB.
COMP-NAME = 'NAME1'.
COMP-TYPE = CL_ABAP_ELEMDESCR=>GET_STRING( ).
APPEND COMP TO COMP_TAB.
COMP-NAME = 'VALUE1'.
COMP-TYPE = CL_ABAP_ELEMDESCR=>GET_STRING( ).
APPEND COMP TO COMP_TAB.
COMP-NAME = 'NAME2'.
COMP-TYPE = CL_ABAP_ELEMDESCR=>GET_STRING( ).
APPEND COMP TO COMP_TAB.
COMP-NAME = 'VALUE2'.
COMP-TYPE = CL_ABAP_ELEMDESCR=>GET_STRING( ).
APPEND COMP TO COMP_TAB.
COMP-NAME = 'NAME3'.
COMP-TYPE = CL_ABAP_ELEMDESCR=>GET_STRING( ).
APPEND COMP TO COMP_TAB.
COMP-NAME = 'VALUE3'.
COMP-TYPE = CL_ABAP_ELEMDESCR=>GET_STRING( ).
APPEND COMP TO COMP_TAB.
NEW_STR = CL_ABAP_STRUCTDESCR=>CREATE( COMP_TAB ).
NEW_TAB = CL_ABAP_TABLEDESCR=>CREATE(
P_LINE_TYPE = NEW_STR
P_TABLE_KIND = CL_ABAP_TABLEDESCR=>TABLEKIND_STD
P_UNIQUE = ABAP_FALSE ).
CREATE DATA DREF TYPE HANDLE NEW_TAB.
CREATE DATA DREF1 TYPE HANDLE NEW_str.
Maybe you are looking for
-
Running Total for "cleared balance"
I want to produce query that will produce two running totals. The 1st once is straight forward and is 'Ledger Balance' - that is the balance after a particular transaction has taken place on that day. The Cleared Balance is the running total balance
-
Storing iMovie events and projects on a time capsule
All I can say is Apple hasn't made this one as easy as drag and drop. Have tried many configuration options on my TC, keep getting a message that the iMovie can not be moved required by the OS? I'm open...
-
Tool for Creating Tracks per command line available?
Hi all, for my master thesis I need to make up a development concept with the JDI. What I'm wondering is, is there any ability (maybe hidden option ) to create tracks per command line interface and connect them per command line? Another question whic
-
I install at the new update cc2014 but for some reason in my computer appear double app the old one and the new but the new dose not gave the setup that I have in my old version! What happen ?
-
Hello, I am giving selection screen to users & after giving input screen values, I want to create a varient out of that input using ABAP. How to create the varient this way? Krutika