Dynamic URL for SOAP receiver adapter

Hey!
I've been looking all over the forum for this issue. What I have seen is many good suggestions, but no one seems to have made this work.
I have tried with message mapping and TServerLocation, but when the scenario is executed, Target URL in the communication channel always overrides the suggested URL from the mapping.
Is is possible to do this dynamic configuration? Do I have to use HTTP adapter and create envelope with mapping instead? Anyone in here actually got this dynamic URL working?
Thanks a bunch!
regards Ole

Hello Cengiz Aytemir,
I am stuck with a similar issue that you faced earlier. I've configured the scenario as you have suggested (Both the UDF and the CC settings). I've hard coded the Target URL as http://
I can see the dynamic URL set correctly in the MONI but the request that I am sending is not reaching the web service.
Below is the error that I am getting:
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
   <SOAP:Body>
      <SOAP:Fault>
         <faultcode>SOAP:Server</faultcode>
         <faultstring>Server Error</faultstring>
         <detail>
            <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
               <context>XIAdapter</context>
               <code>RecoverableException</code>
               <text>com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML
     at com.sap.aii.adapter.xi.ms.XIEventHandler.onTransmit(XIEventHandler.java:453)
     at com.sap.aii.af.ra.ms.impl.core.queue.CallConsumer.onMessage(CallConsumer.java:131)
     at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:834)
     at com.sap.aii.af.ra.ms.runtime.MSWorkWrapper.run(MSWorkWrapper.java:56)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)</text>
            </s:SystemError>
         </detail>
      </SOAP:Fault>
   </SOAP:Body>
</SOAP:Envelope>
When I hard code the Target URL as Test, the error that I get is different. (Detailed error shown below)
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
   <SOAP:Body>
      <SOAP:Fault>
         <faultcode>SOAP:Server</faultcode>
         <faultstring>Server Error</faultstring>
         <detail>
            <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
               <context>XIAdapter</context>
               <code>RecoverableException</code>
               <text>com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: no scheme
     at com.sap.aii.adapter.xi.ms.XIEventHandler.onTransmit(XIEventHandler.java:453)
     at com.sap.aii.af.ra.ms.impl.core.queue.CallConsumer.onMessage(CallConsumer.java:131)
     at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:834)
     at com.sap.aii.af.ra.ms.runtime.MSWorkWrapper.run(MSWorkWrapper.java:56)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)</text>
            </s:SystemError>
         </detail>
      </SOAP:Fault>
   </SOAP:Body>
</SOAP:Envelope>
I am on PI 7.0.
Any help in this regard is highly appreciated.
Best Regards,
Vijay

Similar Messages

Dynamic URL for HTTP receiver adapter

Hi all,
when the XI send the http request to the target system, the format maybe like this:
header + body the body is including: Prolog, payload and Epilog
here is about the target system have a 'input' parameter(maybe string type)
is it possible to pass the 'head + body' these value(or maybe the whole http request message) into input
i mean is it possible to set the dynamic URL for http receiver adapter like this:
http://host:port/path?input=<the header and body>
i have searched the blog Dynamic Configuration of Some Communication Channel Parameters using Message Mapping
Link:[/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping]
and the similar threads in the forum
please give me some advice
thanks in advance

When a HTTP server requests the whole message as URL parameters, then I assume that the server also requests an HTTP GET, which is not supported by XI.
Could you check this?
Regards
Stefan

Dynamic URL in SOAP Receiver adapter

Hi all,
I have a scenario where I am using a SOAP receiver adapter to send a cXML document to some vendors. I need to change the URL based on the vendor number (passed by sender SRM system). So I have created a user-defined function and used in message mapping to assign the right URL to the variable TServerLocation. But the communication channel still prompts for a static URL which appears to be a mandatory field. Even though the DynamicConfiguration tab in Message Monitoring shows that the TServerLocation was correctly assigned, the scenario does not work when I put some dummy in the static URL field like 'dummy' or '*'. Any ideas on how to make the communication channel go for the dynamic URL field and ignore the static URL field? I have already selected the'Use Adapter Specific Message attributes' and 'Variable Transport Binding' check boxes. Am I referring to the correct variable that references the target URL? Also other than the two checkboxes that I mentioned, I am not displayed anything else under "Adapter Specific Message Attributes" section in the comm. channel.
Thanks

James,
I ve just been digging into SAP help, and have tried it too ... Looks like it doesnt work the way it is supposed to.
Anotheer point i found was, in the FILE ADAPTER, when we say ADAPTER SPECIFI ATTRIBUTES , we can select the attirbutes.. This is not possible in a SOAP adapter...
Maybe, we can only access the ADAPTER SPECIIFC ATTIRIBUTES of a SOAP adapter, but cannot set them dynamically.
Let me know if you find something on this issue.
Regards,
Bhavesh

Set dynamic URL in SOAP receiver adapter

Hi,
Is this possible ? I have managed to do this with the HTTP adapter but the this time it is a Web service I am integrating to that requires SOAP 1.1 over HTTP to be used.
Thx.
Colin.

Hi Stefan,
Basically the full URL I want to send the message to via the SOAP receiver is within the payload.
I can see the Target URL can be set in the communication channel but I want to override this with detail from the payload.
I have managed to use dynamic URL setting with the HTTP adapter but am a little stumped on how/if this can be done on the SOAP adapter.
Can you please expand on your comments a little please ?
Kind regards
Colin.

Dynamic URL for Recv HTTP (Adapter spec attribute enabled)

Hi,
I need to have a dynamic URL for one of my cases been worked. the URL is
httlp://:<host>/perform/XTA?serv=*&action=start
the event "action" can accept either start/stop or restart. i wanna to control this dynamically and went for recv http enabled with adapter specific message attributes. here i had enabled the check box "URL" and in parameter 1 i had given the name as "action".
in my message payload the "action" will be start/stop or restart which is handled by UDF for which the code is below:l
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey trig = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/HTTP", "UrlParamOne");
conf.put(trig,action);
return "";
this udf is mapped to the root node of the target...but when execute the case i get the following error
"Dynamic Header - Missing Message Attributes: URL/HTTP Destination"
when i execute the url
httlp://:<host>/perform/XTA?serv=*&action=start
in browser it works fine and also with fully qualified name in http recv works fine but not with dynamic settings.
any help on it pls?

Hi Prabhu,
Enable Adapter-Specific Message Attributes(ASMA) in receiver HTTP channel.
Dont enable checkboxes for "URL or HTTP Destination".
Enable checkbox "Apply URL Parameters"
for parameter1 textbox give value action
Regards,
Praveen Gujjeti

URL in SOAP Receiver Adapter

Hi,
I was given a WSDL file which contains the following:
<wsdl:port name="ZISU_INSTLN_CREATE" binding="tns:ZISU_INSTLN_CREATE">
<soap:address location="http:// hostname:port /sap/bc/srt/rfc/sap/zisu_instln_create/100/zisu_instln_create/zisu_instln_create" />
</wsdl:port>
I've configured a SOAP receiver adapter. In the URL i put the SOAP address location from the WSDL.
Is this correct?
I am seeing the following error when i try to send a message:
Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.net.ConnectException: Connection refused: connect.
Is the error because of the url I use?
Thx
Robert

Hi,
I do have details in the message:
- <detail>
- <ns:SystemFault xmlns:ns="http://www.sap.com/webas/710/soap/runtime/abap/fault/system/">
<Host>undefined</Host>
<Component>COREMSG</Component>
- <ChainedException>
<Exception_Name>CX_SOAP_CORE</Exception_Name>
<Exception_Text>SRT: Wrong Content-Type and empty HTTP-Body received: ("HTTP Code 200 : OK")</Exception_Text>
</ChainedException>
and there is lot more if it helps finding the error, but maybe this is already enough.
Also i tried testing with SOAPUI now:
Result is good. I dont get error's. I get a response from my request as expected.
But if I test with XML from the RWB, with he same data as in SOAPUI, i get the error message again.
Conclusion:
SOAPUI can communicate with my SAP ISU system.
But PI cannot communicate with it.
Why?
Thx
Robert

Creating Digital certificates for SOAP Receiver Adapter

Hi
In Visual Admin...> if we go to the "key storage" and try to create the certificates, we have the options of
selecting the below algorithms.
RSA-512,1024
DH -512,1024
DSA-512,1024
But SOAP Receiver Adapter supports only the below encryption algorithms.
3DES
DES
RC2-40
RC2-64
RC2-128
Still if I try to use any of the RSA, DH, DSA algorithms to create the certificates in visual admin and if I
use the same certificate in SOAP Receiver adapter, I am getting the below error in sxmb_moni
com.sap.aii.af.ra.ms.api.DeliveryException: Unsupported keysize or algorithm parameters.
Could you plz advise, is there any provision in XI to create the certificates using the algorithmS 3DES, DES, RC2 ? or We got to import the certificates from third-party which supports 3DES, DES and RC2 ??
Regards
kumar

can't wait further so closing the thread

Issue while passing Target URL dynamically in SOAP Receiver Adapter

Experts,
I am stuck with an issue while passing the Target URL dynamically.
The UDF required for this works just fine. I can see the Target URL in Dynamic Configuration header(The Key is TServerLocation) in SXMB_MONI but the request that I am sending is not reaching the web service.
Some posts have suggested to hard code the Target URL as http://.
Below is the error that I am getting when I hard the Target URL as http://:
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
   <SOAP:Body>
      <SOAP:Fault>
         <faultcode>SOAP:Server</faultcode>
         <faultstring>Server Error</faultstring>
         <detail>
            <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
               <context>XIAdapter</context>
               <code>RecoverableException</code>
               <text>com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML
     at com.sap.aii.adapter.xi.ms.XIEventHandler.onTransmit(XIEventHandler.java:453)
     at com.sap.aii.af.ra.ms.impl.core.queue.CallConsumer.onMessage(CallConsumer.java:131)
     at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:834)
     at com.sap.aii.af.ra.ms.runtime.MSWorkWrapper.run(MSWorkWrapper.java:56)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)</text>
            </s:SystemError>
         </detail>
      </SOAP:Fault>
   </SOAP:Body>
</SOAP:Envelope>
When I hard code the Target URL as Test (any dummy value), the error that I get is different. (Detailed error shown below)
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
   <SOAP:Body>
      <SOAP:Fault>
         <faultcode>SOAP:Server</faultcode>
         <faultstring>Server Error</faultstring>
         <detail>
            <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
               <context>XIAdapter</context>
               <code>RecoverableException</code>
               <text>com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: no scheme
     at com.sap.aii.adapter.xi.ms.XIEventHandler.onTransmit(XIEventHandler.java:453)
     at com.sap.aii.af.ra.ms.impl.core.queue.CallConsumer.onMessage(CallConsumer.java:131)
     at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:834)
     at com.sap.aii.af.ra.ms.runtime.MSWorkWrapper.run(MSWorkWrapper.java:56)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)</text>
            </s:SystemError>
         </detail>
      </SOAP:Fault>
   </SOAP:Body>
</SOAP:Envelope>
I've referred the post [Dynamic URL for SOAP receiver adapter;.
I am on PI 7.0.
Any help in this regard is highly appreciated.
Best Regards,
Vijay

Issue resolved... by doing this:
DynamicConfigurationKey key2 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/SOAP", "TAuthKey");
conf.put (key2, "username");
In the advanced tab of the communication channel, set the flag "View Authorization keys", and then added "username" (user to access the dynamic target url) and the password (2 times).
That's it...

SOAP receiver adapter for Axis

Hi,
I used SOAP receiver adapter for Axis like below:
Transport Prorocol : HTTP
Message Protocol : Axis
Url: http://<IP>:<Port>/xxx/WebService/services/Head/yyy
Authentication : Basic
User: <user>
Password: <password>
SOAP Version : 1.1
SOAP Action: : <method>
Encapsulation Format : MIME
Payload Extraction : SOAP Body
When i drive PI message it generates error below.
What must i do to solve this problem?
Thanks.
Error message
com.sap.engine.interfaces.messaging.api.exception.MessagingException: javax.ejb.EJBException: Exception in getMethodReady() for stateless bean sap.com/com.sap.aii.axis.appxml|com.sap.aii.adapter.axis.ejb.jarxml|AFAdapterBean; nested exception is: com.sap.engine.services.ejb3.util.pool.PoolException: javax.ejb.EJBException: Exception raised from invocation of public void com.sap.aii.adapter.axis.modules.AFAdapterBean.ejbCreate() throws javax.ejb.CreateException method on bean instance com.sap.aii.adapter.axis.modules.AFAdapterBean@20715646 for bean sap.com/com.sap.aii.axis.appxml|com.sap.aii.adapter.axis.ejb.jarxml|AFAdapterBean; nested exception is: javax.ejb.CreateException: java.lang.NoClassDefFoundError: org/apache/axis/types/URI$MalformedURIException

*Url:* http://172.28.6.194:8080/AssetManagerWebService/services/Head/SapTest
When i use Url with *?wsdl* it generates below (it'is very long. I give part of it)
wsdl
<?xml version="1.0" encoding="UTF-8" ?>
- <wsdl:definitions targetNamespace="http://schemas.hp.com/AssetManager/Custom/Head/SapTest/Wsdl" xmlns:apachesoap="http://xml.apache.org/xml-soap" xmlns:impl="http://schemas.hp.com/AssetManager/Custom/Head/SapTest/Wsdl" xmlns:intf="http://schemas.hp.com/AssetManager/Custom/Head/SapTest/Wsdl" xmlns:tns1="http://schemas.hp.com/AssetManager/Custom/Head/SapTest/Types" xmlns:tns2="http://schemas.hp.com/AssetManager/R51/ACMetaData" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
- 
- <wsdl:types>
- <schema attributeFormDefault="unqualified" elementFormDefault="qualified" targetNamespace="http://schemas.hp.com/AssetManager/Custom/Head/SapTest/Wsdl" xmlns="http://www.w3.org/2001/XMLSchema" xmlns:AdministrationTypes="http://schemas.hp.com/AssetManager/Custom/Head/Administration/Types" xmlns:CableTypes="http://schemas.hp.com/AssetManager/Custom/Head/Cable/Types" xmlns:CatalogTypes="http://schemas.hp.com/AssetManager/Custom/Head/Catalog/Types" xmlns:ChargebackTypes="http://schemas.hp.com/AssetManager/Custom/Head/Chargeback/Types"
<import namespace="http://schemas.hp.com/AssetManager/R51/ACMetaData" />
<import namespace="http://schemas.hp.com/AssetManager/Custom/Head/SapTest/Types" />
- <annotation>
<documentation>Auto-generated schema for AssetCenter web services for Head/SapTest Implementation</documentation>
</annotation>
<import namespace="http://schemas.hp.com/AssetManager/Custom/Head/SAM/Types" schemaLocation="../../schema/Head/SAM/SAMTypes.xsd" />
<import namespace="http://schemas.hp.com/AssetManager/R51/ACMetaData" ......
<wsdl:operation name="retrieveAllBusinessAPIListByName">
<wsdlsoap:operation soapAction="retrieveAllBusinessAPIListByName" />
<wsdl:input name="retrieveAllBusinessAPIListByNameRequest">
<wsdlsoap:body use="literal" />
</wsdl:input>
<wsdl:output name="retrieveAllBusinessAPIListByNameResponse">
<wsdlsoap:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="SapTestService">
<wsdl:port binding="impl:SapTestSoapBinding" name="SapTest">
<wsdlsoap:address location="http://172.28.6.194:8080/AssetManagerWebService/services/Head/SapTest" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>

SOAP Receiver Adapter - Target URL

Hi,
We have a web service scenario, where the Sender is a III Party Java system and PI is the middleware and ECC as our receiver system. We have a wsdl binding generated from SOAMANAGER. We are using the WSDL Endpoint as the Target URL in our SOAP Receiver Adapter. The scenario works perfect with desired results.
Now that webdispatcher comes into place for load balancing and the BASIS team has given a different URL to use in the Target URL of the SOAP Reciver Adapter. The scenario throws the following eorr:-
Adapter Framework caught exception: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 302 Redirect
Has anyone come acrossed such issues. Looking forward for a solution.
Thanks & Best Regards.
Kris

> Now that webdispatcher comes into place for load balancing and the BASIS team has given a different URL to use in the Target URL of the SOAP Reciver Adapter. The scenario throws the following eorr:-
>
> Adapter Framework caught exception: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 302 Redirect
>
> Has anyone come acrossed such issues. Looking forward for a solution.
I wonder why your basis team is not able to help you.
It seems that the web dispatcher is not set up correctly.
http://en.wikipedia.org/wiki/HTTP_302

SOAP Receiver adapter target url and method details

Hi Friends,
I am working on file to SOAP interface.
I know using SOAP receiver adapter , we need to have target URL and action.
Here, how client need to give target url and action as they are not aware of these things..please suggest.
Also if we are generating inbound service interface,how they have to handle this from their end.
Thanks
Kishore

Get the WSDL file from ur Third party client and u can use the WSDL file as an External definition in PI and WSDL file also has WSDL URL which u can use in SOAP receiver adapter.
For INbound SOAP case-
Generate the WSDL file in XI and give that WSDL file to ur third party client which will send the data using the WSDL URL mentioned in the file.
refer below blog for understanding in detail:-
How to use SOAP adapter:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40611dd6-e66e-2910-f383-e80fb44f9cd4
chirag

Dynamic Configuration - Set Directory Path for File Receiver Adapter

Hi Experts,
I have a question regarding the dynamic configuration for the file adapter. Is it possible to set a directory path without a message mapping for the file receiver adapter? the problem is that I want to import a pdf document. this pdf document I want to store in a dynamic directory (depending on the filename). so I have to read the filename out of the dynamic configuration and generate (depending on the filename) a directory for this file. Is that possible without a message mapping? I cannot make a message mapping because the file has the pdf format and should not get changed.
best regards
Christopher Kühn

Hi Gaurav,
I use the ASMA (respectively the filename) for the sender adapter. After the pdf was imported into XI this filename is in the ASMA.
But what then??? How can I get this filename with the help of the variable substitution? and if I have this filename I have to change this filename a bit to generate the name / path of the directory.
Please explain it to me detailled
Thanks and regards
christopher

Payload at Adapter for System Errors - SOAP receiver adapter

Hi Everybody,
I am working on an Idoc to SOAP asynchronous scenario.
There are connection issues between SOAP adaper and the target webservice.
I need to capture the Idoc number from the message payload for the Erroneous messages at the adapter for the System errors.
Is there any way of capturing field values from the payload (Say, Idoc number) at the SOAP receiver Adapter level.
Helpful answers will be rewarded points.
Thanks & Regards,
Zabiulla

Hey,
I think you need to implement a module inorder to get the payload at receiver adapter module.
As far i concern you can not directly refer the payload in adapter in receiveer communication channel unless you have your own module, which gets the payload. Check the Modules tab in the communication channel and also regarding how to get the payload for error information, follow the steps mentioned in the below link, which gets the payload in file. hop it will resolve your issue.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/writepayloadtoafilefromAdapter+Module
Regards..
Prasanna..

SOAP receiver adapter for ASCII-7 characterset???

Hi,
Our scenario is Abap Proxy -> XI -> Web Services (SOAP Adapter). Receiver webservice will accept only the characterset of ASCII-7. But Abap Proxy will send only unicode characterset (default).
Any workaround for receiver SOAP adapter to accept ASCII-7 characterset?
Regards,
Prasad U

Hi -
You can set a specific encoding in the soap receiver channel module configuration. From the SOAP Adapter FAQ (Note 856597):
<i>         o Q: What character encoding is supported by the SOAP receiver
            adapter?
            A: The SOAP receiver adapter can use any character encoding
            supported by the local JDK. The request message from the SOAP
            receiver is normally encoded in UTF-8. If you want to change this
            encoding, for instance to iso-8859-1, you can set parameter
            XMBWS.XMLEncoding to iso-8859-1 in the module configuration for
            the SOAP adapter module. This setting is for the outgoing SOAP
            message and has no effect on the incoming SOAP message. For the
            incoming SOAP message, any code page supported by the local JDK
            is accepted.</i>
Check the <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d23cbe11-0d01-0010-5287-873a22024f79">How to Use the XI 3.0 SOAP Adapter</a> document for an example.
Regards,
Jin

SOAP receiver adapter digest authentization

Hallo,
I have scenario with SOAP receiver adapter configured as follow:
Adapter Type: SOAP
Transport Protocol: HTTP
Message Protocol: SOAP 1.1
Adapter Engine: Integration Serer
Target URL: http://localhost:8099/webservices/test_v1_1_2
Configure User Authentication
User: ****
Pasword:****
but WS need digest HTTP authentication and SOAP adapter send in header Authentication: Basic.
Hou can I change authentication method for SOAP protocol?
Thx

Hallo,
I solved this problem by using AXIS framework. I hope that this short instruction help to someone.
1. In SOAP receiver CC you have to set up Transport Protocol to HTTP(AXIS) and Message protocol to AXIS
2. Now you can switch Authentication to Digest (NOW adapter will still send Basic!!! Digest Authorization is Supported only by the following handler: com.sap.aii.adapter.axis.ra.transport.http.CommonsHTTPSender)
3. On Module tabs in section Module configuration change type HTTPSender to CommonHTTPSender:
(trp handler.type java:com.sap.aii.adapter.axis.ra.transport.http.CommonsHTTPSender)
4. Save and Activate
Before you start to use AXIS framefork you have to deploy necessary library.
This thread help:
Re: How to install SOAP Axis adapter and where is it available ??
Be carefull, for digest authorization you have to linked Optional library "Jakarta-Commons HttpClient" too.
Good luck.
JK

Dynamic URL for SOAP receiver adapter

Similar Messages

Maybe you are looking for