Dynamic Variable for last day of month

Hi all,
I have created one report where in YTD is calculated based on stsyem date. NOw in this report the cal month is in row thus displaying data month wise. But i need one key figure which giving the last day vaue of every month that are displayed in YTD i.e this is based on cal day. Thus the report layout is as follows:
if report is run in mar 2007 then it should display:
calmonth            key figure due amount
Jan 07                this should show due value on last day of jan 07 (i.e 31st jan 07)
Feb 07               this should show due value on last day of feb 07 (i.e 28th feb 07)
Mar 07               this should show due value on last day of mar 07(i.e 31st mar 07)
customer exit variable can give me only one value at a time. How can I make it dynamic to take last day value of every month as per cal month. Could anybody explain me if worked on any such issue.
If there is some how to paper kindly mail me at my email Id : [email protected]
thanks in advance
Regards,
Wrushali

Hi,
We can assign multiple single values to the customer exit.
So in the Query take CALMONTH in rows.
And take your KF in column with Customer exit variable restriction on CALDAY.
So in the code of this Cusotmer exit varible, from the Current date find out the year of the current date and then assign those 12 required days to this variable.
With rgds,
Anil Kumar Sharma .P

Similar Messages

Variable for last day of last month....

Hi,
Can somebody let me know the code to find the last day of last month from the query variable.
Is there any standard/business content variable available for this?
I have found one similar variable , but its for the posting date.
Any help is appreciated.
Regards...

Check this code:
l_date_from = sy-datum.
       l_date_from+6(2) = '01'.
       l_date_from = l_date_from - 1.
       l_s_range-sign = 'I'.
       l_s_range-opt = 'EQ'.
       l_s_range-low = l_date_from.
       l_s_range-high = space.
       APPEND l_s_range TO e_t_range.
You can modify based on your specific requirement.
Regards,
Kams

Dynamic variable to get last day of month

Hi all,
I have created one report where in YTD is calculated based on stsyem date. NOw in this report the cal month is in row thus displaying data month wise. But i need one key figure which giving the last day vaue of every month that are displayed in YTD i.e this is based on cal day. Thus the report layout is as follows:
if report is run in mar 2007 then it should display:
For calmonth       key figure due amount
For Jan 07           this should show due value on last day of jan 07 (i.e 31st jan 07)
for Feb 07           this should show due value on last day of feb 07 (i.e 28th feb 07)
for Mar 07          this should show due value on last day of mar 07 (i.e 31st mar 07)
customer exit variable can give me only one value at a time. How can I make it dynamic to take last day value of every month as per cal month. Could anybody explain me if worked on any such issue.
If there is some how to paper kindly mail me at my email Id : [email protected]
thanks in advance
Regards,
Wrushali

Hi,
U can use FM : SLS_MISC_GET_LAST_DAY_OF_MONTH to get the last day of the month by passing the date/current date.
Thanks,
Debasish

UDF for last day of week/month

Input is a Date(For example: 2010/03/12) in String format.
I need to extract the last day of that week and return it as a string output.
For example if input is 2010/03/12 and thatu2019s a Thursday my output should be 2010/03/14 i.e Saturdayu2019s date.
Similarly I need to extract last day of month too.
Thanks in advance
Soumen...

Hi,
I did not develop this one... but just use "search" button on roseindia and you will have the answer (I think):
[http://www.roseindia.net/java/beginners/DayOfYearToDayOfWeek.shtml|http://www.roseindia.net/java/beginners/DayOfYearToDayOfWeek.shtml]
and do not forget that Google is your friend...
do a research with : Java last day of week, and you have plenty of examples.
Thanks.
P.S: Say us when you will solved your problem.

1st & last day of month based on month selected

Hi All,
I am an infant in BO. I want to create a variable in which I need to compare Order Creation Date with First Day of Month and Last Day of Month.
I have gone through the posts here regarding this, I found huge no of posts on calculating the 1st & last day of month based on a date value. But,
I don't have any date objects in the universe level, instead I have only Month Name/Month Number objects in the universe level (as it is a monthly report)
So, How to create 1st day & last day of month based on the month selected.
That is, If I run the report for FEB 2011 (Prompt values), I need the outputs as 01/02/2011 & 28/02/2011 as my 1st & last date values respectively.
I am working on BOXI R 3.1
Thanks in Advance,
Mitch

Hi
Create a variables and write a formula like
Also add Month number Object in query level
Var_Month
=userresponse("Enter Month")
Var_A
"01/"MonthNumberObj+Right(var_Month;4)
var_First date
Todate(var_A;"dd/MM/yyyy")
var_lastdate
=lastdayofmonth(var_Firstdate)
Note: check the default format for date according to ur database like MM/dd/yy or something like that . and add in the var_firstdate
regards
Sunil

Customer Exit to get last day of month from Year/month

Hi Experts,
I need to create a customer exit to get the last day of month from Cal Year month input variable.
Examples
1)
User input period: 12.2008
I need from the customer exit: 31.12.2008
2)
User input period: 02.2009
I need from the customer exit: 28.02.2009
Can someone help me with the ABAP code to achieve this with a customer exit?
Help will be appreciated.

Hi,
Please use the following code,
Second one is the suitable solution for you, I can understand that, if it leafe year then you have the problem so use the secon one.
First one is using Period i.e. 010.2008 (December 2008).
Secodn one is based on Date/Month.
Note: Insted of SY-DATUm, you give your variable name
*******To get the Last day of the Fy Period entered by User in ZFYP***
    WHEN 'ZLDAY_FI'.
      LOOP AT i_t_var_range INTO loc_var_range WHERE vnam = 'ZFYP'.
        zbdatj = loc_var_range-low+0(4).
        zbuper = loc_var_range-low+4(3).
        CALL FUNCTION 'LAST_DAY_IN_PERIOD_GET'
          EXPORTING
            i_gjahr = zbdatj
            i_periv = 'V3'
            i_poper = zbuper
          IMPORTING
            e_date = zzdate.
        CLEAR: l_s_range.
        l_s_range-low = zzdate.
        l_s_range-sign = 'I'.
        l_s_range-opt = 'EQ'.
        APPEND l_s_range TO e_t_range.
      ENDLOOP.
Note: in the below code I given SY-DATUM, so you change to your Month Variable like using
LOOP AT i_t_var_range INTO loc_var_range WHERE vnam = 'XXXX'.
** Last Day of Current Calendar month
      zzdate = sy-datum.
      CALL FUNCTION '/OSP/GET_DAYS_IN_MONTH'
        EXPORTING
          iv_date = zzdate
        IMPORTING
          ev_days = znum.
      CLEAR: l_s_range.
      l_s_range-low+6(2) = znum.
      l_s_range-low+0(4) = sy-datum+0(4).
      l_s_range-low+4(2) = sy-datum+4(2).
      l_s_range-sign = 'I'.
      l_s_range-opt = 'EQ'.
      APPEND l_s_range TO e_t_range.
Thanks
Reddy
Edited by: Surendra Reddy on Jan 27, 2009 2:47 PM
Edited by: Surendra Reddy on Jan 28, 2009 6:12 AM

Error: ORA-01847: day of month must be between 1 and last day of month

Hi,
I am getting this ORA-01847: day of month must be between 1 and last day of month type of error but I have checked my data all are correct.
I am inserting the data in the merge query. It is giving the above error.
but when i insert the data like that
insert into dt(start_date) select TO_DATE (tariff_start_date, 'DD/MM/RRRR') from ext_zpp0a871;
It does not give any error.
Please find the below code
DECLARE
l_sv_error_msg VARCHAR2 (1000);
BEGIN
FOR i IN (SELECT condition_type, sales_org, division_channel, division,
price_list, ean_upc, amount, unit_of_measure1,
tariff_start_date, tariff_end_date
FROM ext_zpp0a871--This is external table
WHERE condition_type = 'ZPP0' AND ROWNUM < 200)
LOOP
BEGIN
MERGE INTO sap_tariff st
USING (SELECT i.price_list pl, i.ean_upc upc,
TO_DATE (i.tariff_start_date, 'DD/MM/RRRR') tsd,
TO_DATE (i.tariff_end_date, 'DD/MM/RRRR') ted
FROM DUAL) du
ON (st.prod_ean_cuni = du.upc
AND st.pricelist = du.pl
AND st.tariff_start_date = du.tsd
AND st.tariff_end_date = du.ted)
WHEN MATCHED THEN
UPDATE
SET st.condition_type = i.condition_type,
st.sales_org = i.sales_org,
st.division_channel = i.division_channel,
st.division = i.division,
st.amount =
TO_NUMBER (REPLACE (REPLACE (i.amount, '.', NULL),
st.uom = i.unit_of_measure1
WHEN NOT MATCHED THEN
INSERT (condition_type, sales_org, division_channel, division,
pricelist, prod_ean_cuni, amount, uom,
tariff_start_date, tariff_end_date)
VALUES (i.condition_type, i.sales_org, i.division_channel,
i.division, i.price_list, i.ean_upc,
TO_NUMBER (REPLACE (REPLACE (i.amount, '.', NULL),
i.unit_of_measure1,
TO_DATE (i.tariff_start_date, 'DD/MM/RRRR'),
TO_DATE (i.tariff_end_date, 'DD/MM/RRRR'));
/*INSERT INTO sap_tariff
(condition_type, sales_org, division_channel,
division, pricelist, prod_ean_cuni,
amount,
uom,
tariff_start_date,
tariff_end_date
VALUES (i.condition_type, i.sales_org, i.division_channel,
i.division, i.price_list, i.ean_upc,
TO_NUMBER (REPLACE (REPLACE (i.amount, '.', NULL),
i.unit_of_measure1,
TO_DATE (i.tariff_start_date, 'DD/MM/RRRR'),
TO_DATE (i.tariff_end_date, 'DD/MM/RRRR')
EXCEPTION
WHEN DUP_VAL_ON_INDEX
THEN
UPDATE sap_tariff
SET condition_type = i.condition_type,
sales_org = i.sales_org,
division_channel = i.division_channel,
division = i.division,
amount =
TO_NUMBER (REPLACE (REPLACE (i.amount, '.', NULL),
uom = i.unit_of_measure1;
WHEN OTHERS
THEN
l_sv_error_msg := SQLERRM (SQLCODE);
INSERT INTO sap_tariff_log
(date_of_load, condition_type, sales_org,
division_channel, division, price_list,
prod_ean_cuni, amount, uom,
tariff_start_date, tariff_end_date,
rejection_reason
VALUES (SYSDATE, i.condition_type, i.sales_org,
i.division_channel, i.division, i.price_list,
i.ean_upc, i.amount, i.unit_of_measure1,
i.tariff_start_date, i.tariff_end_date,
l_sv_error_msg
END;
END LOOP;
COMMIT;
EXCEPTION
WHEN OTHERS
THEN
l_sv_error_msg := SQLERRM (SQLCODE);
neo_pro_log ('Others Error', l_sv_error_msg);
END;

user13400510 wrote:
but when i insert the data like that
insert into dt(start_date) select TO_DATE (tariff_start_date, 'DD/MM/RRRR') from ext_zpp0a871;
It does not give any error.Maybe the error is on tariff_end_date instead of tariff_start_date ?
What are the datatypes of tariff_start_date and tariff_end_date ? If they are already dates, and you to_date them (and depending on what your nls_date_xxxxx params are) you can have such errors :SQL> sho parameter nls_date_format
NAME_COL_PLUS_SHOW_PARAM TYPE VALUE_COL_PLUS_SHOW_PARAM
nls_date_format string DD/MM/YYYY
SQL> select to_date(sysdate,'Day dd Mon RRRR') from dual;
select to_date(sysdate,'Day dd Mon RRRR') from dual
ERROR at line 1:
ORA-01846: not a valid day of the week
SQL> select to_date(sysdate,'hh24:mi:ss dd/mm/rrrr') from dual;
select to_date(sysdate,'hh24:mi:ss dd/mm/rrrr') from dual
ERROR at line 1:
ORA-01850: hour must be between 0 and 23

Last day of months FM

Hi, Experts.
I'm having some trouble to get the last day of months with the MM_LAST_DAY_OF_MONTHS FM.
There's another FM which does the same thing?
Thanks in advance,
Brian Gonsales

hi,
Use FM LAST_DAY_OF_MONTHS
You can even use the FM 'RP_LAST_DAY_OF_MONTHS' for getting the last day of the month
please reward me if useful...
Edited by: gupta pullipudi on May 6, 2008 4:00 PM

ORA-01847: day of month must be between 1 and last day of month error

Hi All
When i run the following code i'm getting the error:ORA-01847: day of month must be between 1 and last day of month error
SELECT t2.owner_cat,
t1.owner_id,
stock_id,
Sum(received_amount) received_amount,
Sum(curr_amount) curr_amount,
Sum(used_amount) used_amount,
To_char(Add_months(date_work,6),'YYYY') date_work
FROM (SELECT owner_id_to owner_id,
stock_id_to stock_id,
Sum(full_amount) received_amount,
0 curr_amount,
0 used_amount,
To_char(0) date_work
FROM dw_wms_mat_transfer
WHERE master_code_id IN ('8664','8665')
GROUP BY owner_id_to,
stock_id_to
UNION ALL
SELECT owner_id,
stock_id,
0 received_amount,
Sum(curr_amount) curr_amount,
0 used_amount,
To_char(0) date_work
FROM dw_wms_mat_inv
WHERE master_code_id IN ('8664','8665')
GROUP BY owner_id,
stock_id
UNION ALL
SELECT t2.owner_id,
t1.stock_id,
0 received_amt,
0 curr_amt,
Sum(amount) used_amt,
To_char(Add_months(date_work,6),'YYYY') date_work
FROM dw_wms_wo_mat_dc t1,
(SELECT owner_id,
stock_id
FROM dw_wms_mat_inv
WHERE master_code_id IN ('8664','8665')
GROUP BY owner_id,
stock_id) t2
WHERE t1.stock_id = t2.stock_id
GROUP BY t2.owner_id,
t1.stock_id,
To_char(Add_months(date_work,6),'YYYY')) t1,
dw_wms_setup_owner t2
WHERE t1.owner_id = t2.owner_id
GROUP BY t2.owner_cat,
t1.owner_id,
stock_id,
To_char(Add_months(date_work,6),'YYYY')
But when i just run the inner query:
(SELECT owner_id_to owner_id,
stock_id_to stock_id,
Sum(full_amount) received_amount,
0 curr_amount,
0 used_amount,
To_char(0) date_work
FROM dw_wms_mat_transfer
WHERE master_code_id IN ('8664','8665')
GROUP BY owner_id_to,
stock_id_to
UNION ALL
SELECT owner_id,
stock_id,
0 received_amount,
Sum(curr_amount) curr_amount,
0 used_amount,
To_char(0) date_work
FROM dw_wms_mat_inv
WHERE master_code_id IN ('8664','8665')
GROUP BY owner_id,
stock_id
UNION ALL
SELECT t2.owner_id,
t1.stock_id,
0 received_amt,
0 curr_amt,
Sum(amount) used_amt,
To_char(Add_months(date_work,6),'YYYY') date_work
FROM dw_wms_wo_mat_dc t1,
(SELECT owner_id,
stock_id
FROM dw_wms_mat_inv
WHERE master_code_id IN ('8664','8665')
GROUP BY owner_id,
stock_id) t2
WHERE t1.stock_id = t2.stock_id
GROUP BY t2.owner_id,
t1.stock_id,
To_char(Add_months(date_work,6),'YYYY'))
I'm not getting that error, any help please?

Hi,
Like Anuraq already explained, you need to keep in mind that when you apply a to_char, you've turned your DATE datatype into a STRING and by doing that you've lost the ability to use the add_months function again in your outer query.
Using a simplified example, extracted from your example:
MHO%xe> select to_char(add_months(date_work, 6), 'yyyy') date_work
2 from ( select to_char(0) date_work
3         from dual
4         union all
5         select to_char(0) date_work
6         from dual
7         union all
8         select to_char(add_months(sysdate, 6), 'yyyy') date_work
9         from dual
10       );
select to_char(add_months(date_work, 6), 'yyyy') date_work
FOUT in regel 1:
.ORA-01847: day of month must be between 1 and last day of monthHowever, you should either do something like:
MHO%xe> select nvl(to_char(add_months(date_work, 12), 'yyyy'), '0') date_work
2 from ( select to_date(null) date_work
3         from dual
4         union all
5         select to_date(null) date_work
6         from dual
7         union all
8         select sysdate date_work
9         from dual
10       );
DATE
0
0
2010or (less clear, more confusing):
MHO%xe> select nvl(to_char(add_months(date_work, 6), 'yyyy'), '0') date_work
2 from ( select to_date(null) date_work
3         from dual
4         union all
5         select to_date(null) date_work
6         from dual
7         union all
8         select add_months(sysdate, 6) date_work
9         from dual
10       );
DATE
0
0
2010It's not clear to me why you're using add_months twice (inner + outer query) in your original example.
As you can see you can get the same results using it only once in your outer query.

Dynamic variable for 0CALDAY

Hi all, this is my scenario:
I've created a query with input variable for characteristic Year/Month (0CALMONTH), in columns i added a key figure and in rows i added the characteristic 0CALDAY. The result looks someting like this:
Varibale entry: 09.2006
Result table:
<b>
0CALDAY | KYF</b>
01.09.2006 | 1,000
02.09.2006 | 2,000
03.09.2006 | 1,500
30.09.2006 | 2,100
31.09.2006 | 2,350
Now, what i need is to add a column that shows the value of the previous day, so the result should be:
Varibale entry: 09.2006
Result table:
<b>
0CALDAY | KYF | Previous Day KYF</b>
01.09.2006 | 1,000 | -
02.09.2006 | 2,000 | 1,000
03.09.2006 | 1,500 | 2,000
30.09.2006 | 2,100 | (value for 29.09.2006)
31.09.2006 | 2,350 | 2,350
I guess offsets will be the solution, but i need a variable (dynamic variable) to read the current day (0CALDAY) in the report... anyone knows how to do this? a customer exit can solve it (which code)? Please advice.
Thank you.

Thank you KJ for your answer, but unfortunatelly my knowledge in ABAP is very limited, ¿Do you happen to have an example so i can see how to customize it in order to read values from characteristic 0CALDAY?

Current date, first day of month, last day of month, current week, current

Hi All,
may be the question will sounds basic for your guys, I am connecting via MDX a cognos reportnet on a BW 3.0B..due to loads of limitations on filtering via MDX on 'business date/time functions' , I would need to create in the infoqueries that are my data sources, the following additionnal objects:
- current date
- first day of current month
- last day of current month
- current week
- current year
I do not want prefiltered infoqueiries but object with these single values so that from reportnet I can have something like: OCALDAY between 'first day of current month' and 'last day of curent month'
Is there standard fonction for this under BW/BEX or if we need to developp functions has nayone some code examples.
thanks a lot for your great input
David

Hi,
In universe level if you want implement the requirede functions then you have to write custom sql and if you want to implement them in Reporting level then most of the functions are available to you. e.g. Quarter,Month, Year, Current Date....
Cheers,
Suresh A.

Day must be between 1 and last day of month

Hi
I have a master detail form for overtime entries.
Master Block contain emp_no,name,month etc.
Detail block contain a date field ,,from time, to time etc
when i enter the date in detail block it defaults the month from Server date and i am getting the error "Day must be between 1 and last day of ...."
The form is going to reside on server so i cant go for changing system date for that.
THe work around i am trying is i have created a dummy item in detail block for Date(dd) entry and populating my original date field on the basis of it.
so that i can get rid of last day validation of month.The datatype of dummy item is char
my code is
c_day varchar(2);
c_month varchar(2);
c_year varchar(4);
d_date varchar(8);
begin
c_day := :DETAIL.dummy;
c_month := to_char(:MASTER.month, 'mm');
c_year := to_char(:master.month, 'yyyy');
d_date := c_day||c_month||c_year;
:DETAIL.ot_date := to_date(d_date,'ddmmyyyy');
end;
I am using post change trigger on my dummy item but i am getting ORA-01840 for that.I have tried several ways but it is giving different type of date errors for that.
Any help is highly appreciated

Dear try this
SELECT RUN_NUM, CV AS MONTH_DATE
FROM
SELECT ROWNUM AS RUN_NUM,TO_DATE('01-' || 'SEP' || '-' || 2007 ,'DD/MM/YYYY')+ (ROWNUM-1) CV
FROM
(SELECT 1 FROM DUAL GROUP BY CUBE (1,1,1,1,1)) A
WHERE TO_CHAR(CV,'MON-YYYY') = 'SEP-2007'

Get first and last day given month name with combobox

hi guys ;
I loaded to month name in combobox and I want to get first and last day by the name of month from selected Combobox
So if I select to february than results get 01.02.2015 and 28.02.2015
if select March than 01.03.2015 and 31.03.2015
Thanks .

Thank you for useful post , How to change Culturinfo as a Turkish Month name ?
your's code is work if I use English month name But it was get error when use the turkish month name
If you are running your application on a Turkish Windows you could use the System.Globalization.CultureInfo.CurrentCulture:
int month = DateTime.ParseExact(monthName, "MMMM", System.Globalization.CultureInfo.CurrentCulture).Month;
Or you could use create an explicit culture object like this:
System.Globalization.CultureInfo ci = new System.Globalization.CultureInfo("tr-TR");
int month = DateTime.ParseExact(monthName, "MMMM", ci).Month;
Please remember to mark all helpful posts as answer to close your threads.

Get First and last day of Month..

Hi Friends,
I am trying to fetch First and Last day of a month and would like to implement that in the following code:
SELECT COALESCE(Date_A, Date_B, Date_C)
FROM dual
Here Date A and B are in Format of MM DD YYYY (March 14, 2008)
and Date C is like MM YYYY (March 2008)
How can I get the Date_C as March 1, 2008 OR March 31, 2008 format if Date A and B are NULL ?
Thanks!
Edited by: user11095386 on Apr 23, 2009 10:45 AM

Hi,
In my earlier message, I thought that you were starting with strings like '03 12 2009' and that you wanted to display them as 'March 12 2009'. If what you have is just the reverse, then just reverse the format strings in my first message. Add a comma, if you want one, in the appropriate format string.
I believe this is what you want:
COALESCE ( TO_CHAR ( TO_DATE ( Date_A, 'fmMonth DD YYYY'), 'MM DD YYYY')
         , TO_CHAR ( TO_DATE ( Date_B, 'fmMonth DD YYYY'), 'MM DD YYYY')
         , TO_CHAR ( TO_DATE ( Date_C, 'fmMonth YYYY'),    'MM DD YYYY')
         )Notice how, on the 3rd line, TO_DATE is called without DD in the format string:
TO_DATE ( Date_C, 'fmMonth YYYY')When you do this, the day defaults to the 1st of the month, so this is all you have to do to convert the VARCHAR2 'March 2009' to the DATE 01-Mar-2009.
If you want the last day of the month, not the first, when Date_C is chosen, then use LAST_DAY:
COALESCE ( TO_CHAR ( TO_DATE ( Date_A, 'fmMonth DD YYYY'), 'MM DD YYYY')
         , TO_CHAR ( TO_DATE ( Date_B, 'fmMonth DD YYYY'), 'MM DD YYYY')
         , TO_CHAR ( LAST_DAY ( TO_DATE ( Date_C
                                          , 'fmMonth YYYY'
             , 'MM DD YYYY'
         )

To get first day and last day of month.

Please help, I need a sql function that will return the first day of a month when I enter a date that is on or before the 15th and then returns the last day of the month when I enter a date of the 16th or later.
This is my query but I get ORA-00932: inconsistent datatypes: expected DATE got CHAR error.
select CASE
WHEN to_char(:p_date, 'DD') < 15 THEN
add_months((LAST_DAY(:p_date)+1), -1)
WHEN to_char(:p_date, 'DD') > 15 THEN
TO_CHAR(LAST_DAY(:p_date))
end
from dual;
Thanks

Hi,
please use the good habit to mark your questions as answered when you are satisfied with the answers.
Additionally when you put some code or output please enclose it between two lines starting with {noformat}{noformat}
i.e.:
{noformat}{noformat}
SELECT ...
{noformat}{noformat}
Regards.
Al

Dynamic Variable for last day of month

Similar Messages

Maybe you are looking for