Dynamic Variant -Current date in selection screen - for batch jobs

Hi Experts,
My report runs in batch job with a variant, daily.
One of the filed in selction screen should hv CURRENT DATE, with out providing as input explicitly by user.
So, How Can I get it done?
Its some thing with Dynamic variants + Selection Variables + date selection, but, I forgot the navigation etc.
pl. let me know
thanq

thanq.
and pls. let me further clarify that,
programitically am populating the date as current date minus 1 in the field of my_date in the selection screen.
now, they wanna to run the report in back ground, daily.
now, I followed ur tip/link and saved with_date_variant, fine.
so, pls. let me know that,
1) if the report runs in back ground tomorrow with with_date_variant(which is i created by seeing ur link), Is the selection screen my_date(prog. populates as June 5th) will be override with current date(i.e. June 6th)?
In broad, Is the selection criteria wuld be over writes with the Dynamic varints?
thanq

Similar Messages

Variants on tabbed selection screen for ALV reports

Scenario: We use a tabbed selection screen for an ALV report. We create a variant, make a selection field on the second tab mandatory & save it without a value. When we run the report with the saved variant it does not check that the required field on the second tab is populated before it executes.
Question: How can I code such a check?
Edited by: Alridge Tom on Jul 4, 2008 3:43 PM

Hi,
try inserting this code apropietly in you program. (1 parameter + Initialization + At-selection-screen + 2 forms)
START HERE
PARAMETERS: pa_vari TYPE disvariant-variant.
INITIALIZATION.
g_repid = sy-repid.
CLEAR e_variant.
e_variant-report   = sy-cprog.
e_variant-username = sy-uname.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
    EXPORTING
      i_save     = 'A'
    CHANGING
      cs_variant = e_variant
    EXCEPTIONS
      not_found = 2.
IF sy-subrc = 0.
    pa_vari = e_variant-variant.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pa_vari.
PERFORM alv_variant_f4 CHANGING pa_vari.
*&      Form ALV_VARIANT_F4
FORM alv_variant_f4 CHANGING pa_vari.
DATA: l_exit(1) TYPE c.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
    EXPORTING
      is_variant       = e_variant
      i_tabname_header = 'ANYTHING'
      i_save           = 'A'
    IMPORTING
      e_exit           = l_exit
      es_variant       = e_variant
    EXCEPTIONS
      not_found        = 2.
IF sy-subrc = 2.
    MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
    IF l_exit = space.
      pa_vari = e_variant-variant.
    ENDIF.
ENDIF.
ENDFORM.                               " ALV_VARIANT_F4
END
Hope iy helps!
Alfonso

Change Layout in Selection Screen for OO ALV-Grid

Hello everyone,
I got a problem regarding layouts for objectoriented ALV Grid. I want to make it possible that user can take the layout for ALV he wants to on the selection screen. So far thats no problem and it works. But there are some little problems which I do not know how to fix them. But first the facts:
(1) I got my parameter for layout
PARAMETER: p_vari TYPE disvariant-variant.
(2) I fill my global layout structure in initialization
INITIALIZATION.
* Variante vorbelegen
   gs_variant-username = sy-uname.
   gs_variant-report   = sy-repid.
* Layout holen
   CALL FUNCTION 'LVC_VARIANT_DEFAULT_GET'
     EXPORTING
       i_save        = 'A'
     CHANGING
       cs_variant    = gs_variant
     EXCEPTIONS
       wrong_input   = 1
       not_found     = 2
       program_error = 3
       OTHERS        = 4.
   IF sy-subrc = 0.
     p_vari = gs_variant-variant.
   ENDIF.
(3) I got my handling for F4-value help on variant parameter
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
   CALL FUNCTION 'LVC_VARIANT_F4'
     EXPORTING
       is_variant    = gs_variant
       i_save        = 'A'
     IMPORTING
       es_variant    = gs_variant
     EXCEPTIONS
       not_found     = 1
       program_error = 2
       OTHERS        = 3.
   IF sy-subrc <> 0.
     MESSAGE text-m01 TYPE 'S'.
   ELSE.
     p_vari = gs_variant-variant.
   ENDIF.
(4) I give back my parameters content into the variant structure at start of selection
START-OF-SELECTION.
   gs_variant-username = sy-uname.
   gs_variant-report   = sy-repid.
   gs_variant-variant = p_vari.
This works all fine but I got some problems when using default variants/layouts. For example I got a default variant only for me. When starting the selection screen it works fine that the default layout was written. It is displayed automatically in the variant parameter. But I want that if i I empty the content (blank it out) from my variant parameter, that report should start with "normal" layout how it was written in the report and NOT with default layout.
When I clear the gs_variant it works like I want it, but then the alv layout button looks like (without functions for layout), because I do not have the reference to my report.
So what to do? :-)
Regards
Michael

Wow that was fast, works great, thanks :-)
I did not use this parameter in set table method but now I fill it dynamically.
Ok next problem, one step harder ;-)
Now I have one selection screen for one ALV-Grid, but four radio buttons which control with which data the ALV gets filled (four different fieldcats, data tables and so on). Each Grid got an own HANDLE so that the layouts can be separated in four categories.
Now I want that by changing the radio button the individual standard layout for the chosen alv grid is getting filled.
This works fine when using it in selection screen output.
AT SELECTION-SCREEN OUTPUT.
   CLEAR gs_variant.
* Layout-Handles individuell für Klausel-Radiobuttons setzen
   IF     p_py IS NOT INITIAL.
     gs_variant-username = sy-uname.
     gs_variant-report   = sy-repid.
     gs_variant-handle   = 'KLPY'.
   ELSEIF p_rh IS NOT INITIAL.
     gs_variant-username = sy-uname.
     gs_variant-report   = sy-repid.
     gs_variant-handle   = 'KLRH'.
   ELSEIF p_aj IS NOT INITIAL.
     gs_variant-username = sy-uname.
     gs_variant-report   = sy-repid.
     gs_variant-handle   = 'KLAJ'.
   ELSEIF p_sr IS NOT INITIAL.
     gs_variant-username = sy-uname.
     gs_variant-report   = sy-repid.
     gs_variant-handle   = 'KLSR'.
   ENDIF.
* Layout holen
   CALL FUNCTION 'LVC_VARIANT_DEFAULT_GET'
     EXPORTING
       i_save        = 'A'
     CHANGING
       cs_variant    = gs_variant
     EXCEPTIONS
       wrong_input   = 1
       not_found     = 2
       program_error = 3
       OTHERS        = 4.
   IF sy-subrc = 0.
     p_vari = gs_variant-variant.
   ELSE.
     CLEAR p_vari.
   ENDIF.
But unfortunately selection screen output is getting passed by EACH changing in the selection screen. This means when I try to clear the default layout in my parameter field, it gets refilled automatically with default layout. If I do a condition around the filling (only if not initial) the default value filling does not work fine in every case, e.g. when clearing the parameters field and then change the radiobutton -> then it does not get filled automatically.

Define selection screen for ldb_process

Hi I'm using the call function ldb_process for KDF(lfa1, lfb1, bsik), the trouble is that the information its different than if i do it on a normal report defining the logical database kdf and selection screen 903.
I find that the difference is because the selection screen, this is because the default selection screen for the kdf database is 1000, and this selection has the "Open items at key date" selection with the current date.
The question is:
How can i define the selection screen 903 using the call function ldb_proces?
Thanks
Pablo Santos

Hi,
You cannot define screen version 903 using function LDB_PROCESS. Instead use table "SELECTIONS" of the function module .
Cheers.

How to show the Current Date in the Screen as default

Hi all,
This is may be simple to u all, but i need the solution for this,
I want to show the Current date in the Screen, i am using the structure. but the calendar control showing when i run the program. But i want to show the current date as default.
Thanks
Shankar

Is this a screen or a report?
If its a report, try assigning DEFAULT sy-datum (to the parameter/select-option name)
If its a screen field, try writing this in the PBO:
IF fieldname IS INITIAL.
fieldname = sy-datum.
ENDIF.
Hope this helps.
Sudha

Variants with subscreens in selection screen

I have a screen that contains a subscreens....this subscreen is a selection-screen....i need to save and load variants for this selection-screen.
My code:
REPORT zprueba_02.
----u2013
TABLES                                                        *
----u2013
TABLES: spfli.
----u2013
TYPE-POOLS                                                    *
----u2013
TYPE-POOLS: slis.
----u2013
INTERNAL TABLES                                               *
----u2013
DATA: t_rkey TYPE STANDARD TABLE OF rsvarkey WITH HEADER LINE,
      t_selctab TYPE STANDARD TABLE OF rsscr WITH HEADER LINE,
      t_vari TYPE STANDARD TABLE OF rvari WITH HEADER LINE,
      it_extab TYPE slis_t_extab,
      wa_extab LIKE LINE OF it_extab.
----u2013
VARIABLES                                                     *
----u2013
DATA: ok_code TYPE sy-ucomm,
      w_variant TYPE rsvar-variant,
      w_user_vari TYPE rsvar-variant,
      w_vari_report TYPE rsvar-report,
      sel_variant TYPE rsvar-variant,
      sel_variant_text TYPE rsvar-vtext,
      w_report TYPE rsvar-report,
      variant_exists TYPE c.
----u2013
SELECTION-SCREEN                                              *
----u2013
SELECTION-SCREEN BEGIN OF SCREEN 101 AS SUBSCREEN.
SELECT-OPTIONS: s_carrid FOR spfli-carrid,
                s_connid FOR spfli-connid.
SELECTION-SCREEN END OF SCREEN 101.
----u2013
INITIALIZATION                                                *
----u2013
INITIALIZATION.
w_report = sy-repid.
PERFORM variant_exists.
----u2013
START-OF-SELECTION                                            *
----u2013
START-OF-SELECTION.
CALL SCREEN 0100.
*&      Module STATUS_0100 OUTPUT                               *
MODULE status_0100 OUTPUT.
SET PF-STATUS '100' EXCLUDING it_extab.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT                          *
MODULE user_command_0100 INPUT.
ok_code = sy-ucomm.
CASE ok_code.
    WHEN 'SAVE'.
      PERFORM save_variant.
      PERFORM variant_exists.
    WHEN 'BACK'.
      LEAVE TO SCREEN 0.
    WHEN 'GET_VAR'.
      PERFORM load_variant.
    WHEN 'DEL_VAR'.
      PERFORM delete_variant.
      PERFORM variant_exists.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Form SAVE_VARIANT                                        *
FORM save_variant.
t_rkey-report = sy-repid.
APPEND t_rkey.
CALL FUNCTION 'RS_VARIANT_SAVE_FROM_SELSCREEN'
    EXPORTING
      curr_report          = w_report
     USER_VARI            = SY-SLSET
      vari_report          = w_report
    IMPORTING
      variant              = w_variant
    TABLES
      p_sscr               = t_selctab
      p_vari               = t_vari
    EXCEPTIONS
      illegal_variant_name = 1
      not_authorized       = 2
      no_report            = 3
      report_not_existent = 4
      report_not_supplied = 5
      OTHERS               = 6.
t_rkey-variant = w_variant.
MODIFY t_rkey INDEX 1.
CALL FUNCTION 'RS_RWSET_SAVE_VARIANT'
    EXPORTING
      rkey    = t_rkey
    TABLES
      selctab = t_selctab.
ENDFORM.                    " SAVE_VARIANT
*&      Form LOAD_VARIANT                                        *
FORM load_variant.
PERFORM choose_variant CHANGING sel_variant.
IF sel_variant NE space.
    CALL FUNCTION 'RS_SUPPORT_SELECTIONS'
      EXPORTING
        report               = w_report
        variant              = sel_variant
      EXCEPTIONS
        variant_not_existent = 1
        variant_obsolete     = 2
        OTHERS               = 3.
ENDIF.
ENDFORM.                    " LOAD_VARIANT
*&      Form DELETE_VARIANT                                      *
FORM delete_variant.
PERFORM choose_variant CHANGING sel_variant.
IF sel_variant NE space.
    CALL FUNCTION 'RS_VARIANT_DELETE'
      EXPORTING
        report               = w_report
        variant              = sel_variant
        flag_confirmscreen   = 'X'
        flag_delallclient    = 'X'
      EXCEPTIONS
        not_authorized       = 1
        not_executed         = 2
        no_report            = 3
        report_not_existent = 4
        report_not_supplied = 5
        variant_locked       = 6
        variant_not_existent = 7
        no_corr_insert       = 8
        variant_protected    = 9
        OTHERS               = 10.
ENDIF.
ENDFORM.                    " DELETE_VARIANT
----u2013
      FORM CHOOSE_VARIANT                                       *
----u2013
FORM choose_variant CHANGING l_sel_variant.
CALL FUNCTION 'RS_VARIANT_CATALOG'
    EXPORTING
      report               = w_report
      masked               = 'X'
    IMPORTING
      sel_variant          = sel_variant
      sel_variant_text     = sel_variant_text
    EXCEPTIONS
      no_report            = 1
      report_not_existent = 2
      report_not_supplied = 3
      no_variants          = 4
      no_variant_selected = 5
      variant_not_existent = 6
      OTHERS               = 7.
ENDFORM.                    "CHOOSE_VARIANT
*&      Form VARIANT_EXISTS                                      *
FORM variant_exists.
CALL FUNCTION 'RS_VARIANT_FOR_ONE_SCREEN'
    EXPORTING
      program        = w_report
      dynnr          = '0101'
    IMPORTING
      variant_exists = variant_exists.
IF variant_exists EQ 'X'.
    CLEAR: wa_extab, it_extab.
    REFRESH it_extab.
ELSE.
    CLEAR: wa_extab, it_extab.
    REFRESH it_extab.
    wa_extab-fcode = 'GET_VAR'.
    APPEND wa_extab TO it_extab.
ENDIF.
ENDFORM.                    " VARIANT_EXISTS
At include modul i have:
PROCESS BEFORE OUTPUT.
MODULE status_0100.
CALL SUBSCREEN sb_0001 INCLUDING w_report '0101'.
PROCESS AFTER INPUT.
MODULE user_command_0100.
CALL SUBSCREEN sb_0001.
and i have declared in the screen a subscreen area called sb_001.
When i try to save the variant, the next error:
Selection screen 0100 contains no object.

I think error is coming from function module RS_VARIANT_SAVE_FROM_SELSCREEN
try to use function RS_REFRESH_FROM_SELECTOPTIONS toget contents of fields, then save a variant with this contents
-> check if variant already exists with RS_VARIANT_EXISTS
-> if exists : RS_VARIANT_CHANGE
-> if not exists : RS_CREATE_VARIANT

HOW TO PASS THE DATA FROM SELECTION SCREEN TO STANDARD TRANSACTION?

HI,
HOW TO PASS THE DATA FROM SELECTION SCREEN TO STANDARD TRANSACTION?
thanks,
samba.

By selection screen, what do you mean? There is no selection screen in WDA as there was in classic dynpro. Do you mean you are using the Select-Options reusable component? Are you wanting to call a standard transaction via ITS - SAPGUI for HTML? Please provide more details to your question.

Selection screen for HR report with logical database PNP

Hi All,
I am writing a HR report. And I use the logical database PNP. Also I create a HR report category for this report. In the report category, I can define the selection screen field. But all these fields are selection option format. My question is How can I add parameters, radiobutton group and checkbox in the selection screen. Thanks.
Alex

Hi Alex,
Sorry for replying so late. Please try this tutorial:
w w w. s a p t e c h n i c a l. c o m -> tutorials -> ABAP-HR -> Creating HR Report category in PNP logical database
Sorry, I put it like this, because direct link doens't let me post the answer. Don't know why.
It can also be something with your custom code in selection screen. Though it works fine for, try to remove COMMENTs and observe the result. Maybe parameters are overlapping somehow. First try this:
SELECTION-SCREEN begin of BLOCK blk2 WITH FRAME TITLE text-002.
PARAMETERS RefDate type DATS.
parameter BFlag type c RADIOBUTTON GROUP grp1.
PARAMETER FFlag type c RADIOBUTTON GROUP grp1.
parameters days type i.
PARAMETERS spvsr like PA0001-MSTBR.
selection-SCREEN end of BLOCK blk2.
If that works together with the report category, try to extend it with adding a selection-screen comment, but do this in reversed order (comment goes first and FOR FIELD addition is supplied) like this:
SELECTION-SCREEN begin of BLOCK blk2 WITH FRAME TITLE text-002.
PARAMETERS RefDate type DATS.
SELECTION-SCREEN begin of line.
SELECTION-SCREEN COMMENT 3(10) text-003 for field bflag. "FOR FIELD, and goes first
parameter BFlag type c RADIOBUTTON GROUP grp1.
SELECTION-SCREEN COMMENT 16(10) text-004 for FIELD fflag. "here two
PARAMETER FFlag type c RADIOBUTTON GROUP grp1.
SELECTION-SCREEN end of line.
parameters days type i.
PARAMETERS spvsr like PA0001-MSTBR.
selection-SCREEN end of BLOCK blk2.
If still not working, see if text-003 and text-004 are not too long (you expect them to be 10 chars), This may somehow affect selection screen.
You may also try with setting cursor position explicity by:
SELECTION-SCREEN begin of line.
SELECTION-SCREEN POSITION 3.
SELECTION-SCREEN COMMENT (10) text-003 for field bflag.
parameter BFlag type c RADIOBUTTON GROUP grp1.
SELECTION-SCREEN POSITION 16.
SELECTION-SCREEN COMMENT (10) text-004 for FIELD fflag. "here two
PARAMETER FFlag type c RADIOBUTTON GROUP grp1.
SELECTION-SCREEN end of line.
It is really hard to identify where can be a bug as it is working fine for me. Keep trying with different variations, it should finally run with some.
Regards
Marcin

Selection Screen for crystal report ?

Hi to all,
Is it possible to create selection screen using Crystal report designer alone ?
I came to know that we can give selection parameteres using SELECT EXPERT option in desginer.
Can we create selection screen for user input like we have in abab (selection screen) ?.
Is it possible to check authorization using Crystal report designer ?
If anyone knows anything .... remotely connected with the question I asked please reply.
Waiting for reply.
Regards,
Surya.

Surya,
To do what you are wanting, you will want to do the following:
1) Create parameters. Open the Field Explorer > right click Parameter Fields > fill in the necessary fields o create the desired parameter.
2) Add the parameter to the Select Expert.
2a) If you are using a SQL Command to generate your data set you will need to add the parameter name to the Parameter List of the Command and add it the selection criteria of the SQL statement.
Something like this:
WHERE f.FieldName = {?ParameterName}
HTH,
Jason

User presses F4 on the selection screen for the field ''Transport Request"

Dear ALL,
                 I want to build up a functionality in my report where if the user presses F4 on the selection screen for the field ''Transport Request", then it will display all the Transport Requests involving that particular User...
What I mean is the normal process that is provided by SAP on saving an object in a package & assigning it to TR...
How do we Achieve it ?

Hi.
First we need to give the client after that client number related requestes display in second parameter F4 help for that purpose i used two function modules.First for read the client no dynamically after that pass the client number second function module.
then u can get all the request for that client.
DFIELD-FIELDNAME = 'P_MANDT'.
APPEND DFIELD.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
    dyname                               = 'Y9EZ_TR_COPYCLIENT'
    dynumb                               = SY-DYNNR
tables
    dynpfields                           = DFIELD
READ TABLE DFIELD INDEX 1 ."WITH KEY DFIELD-FIELDVALUE = 'P_MANDT'.
V_MANDT = DFIELD-FIELDVALUE.
CALL FUNCTION 'TR_F4_REQUESTS'
EXPORTING
IV_USERNAME                   = SY-UNAME
IV_TRKORR_PATTERN             =
IV_TRFUNCTIONS                =
   IV_TRSTATUS                   = 'RNDL'
IV_FROM_DATE                  =
IV_TO_DATE                    =
   IV_CLIENT                     = V_MANDT
IV_PROJECT                    =
IV_TITLE                      =
IV_VIA_SELECTION_SCREEN       = 'X'
IV_COMPLETE_REQUESTS          = 'X'
IT_EXCLUDE_REQUESTS           =
IMPORTING
   EV_SELECTED_REQUEST           = S_TRKORR-LOW.
ES_SELECTED_REQUEST           =
'TR_F4_REQUESTS' This function module for request
Regards
muralii

Selection screen for submit in BSP

Hi Experts,
I have gone throught the link to submit the program in BSP using varients, but i even want to see the selection screen for tht so tht user can post his own values over there.
I tryed SUBMIT with different options but i am not able to see the selection screen for it,pls help me its urgent.
thanks in advance.
Saurabh.

hi,
the submit i have made it the way u told me..before itself..so thts fine..
but value which i get in first.htm of these dates is not getting transfered to the next.htm
thought i am able to get the value through the navigation->set_parameter...
really i feel this issue is bit getting longer....
i guess i used my ful day on it...
thanks for ur great help..but pls let me know is there any proble here in my event handler in first .htm
IF event_id = CL_HTMLB_MANAGER=>EVENT_ID.
See if upload is triggered from button
DATA: event TYPE REF TO CL_HTMLB_EVENT.
event ?= CL_HTMLB_MANAGER=>get_event( runtime->server->request ).
IF event->name = 'button' AND event->event_type = 'click'.
    DATA: button_event TYPE REF TO CL_HTMLB_EVENT_BUTTON.
    button_event ?= event.
ENDIF.
CASE event->id.
    WHEN 'ok'.
      DATA: date1 TYPE REF TO CL_HTMLB_INPUTFIELD.
      DATA: date2 TYPE REF TO CL_HTMLB_INPUTFIELD.
     date1 ?= CL_HTMLB_MANAGER=>GET_DATA(
                          request = runtime->server->request
                          name    = 'inputField'
                          id      = 'fromdate'
      IF date1 IS NOT INITIAL.
        CALL FUNCTION 'CONVERSION_EXIT_PDATE_INPUT'
          EXPORTING
            INPUT         = date1->value
         IMPORTING
           OUTPUT        = p_date.
      ENDIF.
      date2 ?= CL_HTMLB_MANAGER=>GET_DATA(
                          request = runtime->server->request
                          name    = 'inputField'
                          id      = 'todate'
      IF date2 IS NOT INITIAL.
        CALL FUNCTION 'CONVERSION_EXIT_PDATE_INPUT'
          EXPORTING
            INPUT         = date2->value
         IMPORTING
           OUTPUT        = p1_date.
      ENDIF.
      navigation->set_parameter( 'p_date' ).
      navigation->set_parameter( 'p1_date' ).
      navigation->next_page( 'NEXT' ).
ENDCASE.
ENDIF.
pls help me out expert.
thanks,
Saurabh

How to define our own selection screen for logical database in abap-hr?

Hi Friends,
Can u please help me
How to define your own selection screens for logical database.
we use to do like(goto->attributes-HRReportcatagerious ).but How to desin using customer table like t599c, t599f and how to add to my logical database?
Thanks in advance
charan

check out this online help
http://help.sap.com/saphelp_erp2004/helpdata/en/9f/dba65c35c111d1829f0000e829fbfe/frameset.htm
Regards
Raja

How to get One Selection Screen for all queries?

Hi Experts,
I have three queries having selection screens. All the selection screen have the same variables, but the reports are different.
I have created a workbook having these three queries. Each time when the workbook opens, the three selection screen pops up one after the another. Same values are entered in all the selection screens.
Now the user wants only one selection screen for all the three reports. Is it possible? I tried but I do not see any way.
I think there should be some way of getting it done.
Waiting for your inputs,
With kind regards,
Shreeem

Hi
If a workbook contains multiple queries that use the same variable, you are prompted to enter the variable values again for each query. To avoid this, set the Display Duplicate Variables Only Once flag.
Goto Workbook Settings>Under Variables Tab>select Display Duplicate Variables only Once
http://help.sap.com/saphelp_nw70ehp1/helpdata/EN/54/a493f7256b43698191a2623e5a0532/frameset.htm
Hope this helps,
Aparna Duvvuri

Modify selection screen for Logical Database 'SDF'

Hi
I need to make a section of the standard selection screen for logical database 'SDF' invisible. I have tried the differet selection screen options of the report attributes, but none of the provided ones give me what I want.
How can I find the name of the screen group for the "Line Item Selection" block of the selection screen so that I can make it invisible when the selection screen is displayed?
Thanks,
Thomas

I tried to do this:
Loop at screen.
         if   screen-group4 = '026'
           or screen-group4 = '027'
           or screen-group4 = '028'.
             screen-invisible = 1.
             modify screen.
         endif.
endloop.
This removed the selection text for these fields, but the Line Item Selection block is still visible, and the actual input fields are also visible. They now look like password input fields with all ***** in them.
What am I doing wrong?
Thanks for your help!
Thomas

Cannot enter value in selection screen for Hierarchy variable.

Hi All,
I have a hierarchy variable on the selection screen for Org unit.
When i execute the report via Bex or RSRT i am able to enter the value directly into the selection screen input field without going for F4 help and then selecting the value.
But when the same query is used in web template and executed the input field for the variable on the selection screen is greyed out and doesnt allow to type in the value. Only way to fill in the value is via F4 help.
Can anyone tell why is this happening and is there any way this can be changed?
Thanks in advance.
-RJ

Hi Prakash,
I am not able to select or click on the input field of the selection screen before and after selecting the value
CTRL+K doesnt work for me.
The display field is populated only when i select a node from the F4 help screen.
When executed from RSRT the field is highlighted and i am able to enter the value unlike when executed on web browser.
The variable is Mandatory multiple single value readu for input.
I found an article saying that for hierarchy node variables the values are forced by F4 value help as the values that are entered manually might not be unique.
This is the link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/15839190-0201-0010-adb1-d2edd9857b0a
I would like to know if there is a work around or setting that can be made to make it work?
-RJ

Dynamic Variant -Current date in selection screen - for batch jobs

Similar Messages

Maybe you are looking for