Dynamic variant won't read TVARV
Hi, I have setup program RVSETDAT to run on daily basis a class B job to run just after midnight. The program runs a scheduled and updates TVARV.
In TC STVARV can I see that the variable RV_ACTUAL_DATE are updated.
My first program to setup that reads variable RV_ACTUAL_DATE are RFIMPNBS that are supposed to load the daily exchange rates from ECB.
The config of program RFIMPNBS works u2013 if I run it manually or schedule it to run once does it works like charm.
The problem occurs when I try to use variable RV_ACTUAL_DATE in background variant. If simply wonu2019t read the variable upon execution time despite I have selected it according this guide http://help.sap.com/saphelp_nw70/helpdata/en/c0/980374e58611d194cc00a0c94260a5/content.htm
Any input would be highly appreciated!
TIA
René V. Nielsen
Now it works!
The solution was to save the variant with the field option u201CSave field without valueu201D and in the field select the TVARV value
Similar Messages
-
How to set up Dynamic Variants for job which is based on Pay Period
Hi,
We need to set up dynamic variant for payroll interface. This interface is based on Pay periods and that is why we need to use different variant for each month. Letus know how to set up dynamic variant which will take care of Pay PeriodsHi, Thnx for reply.
We are not changing the control records, current period will be some old period in system.
payroll is not processed in SAP, -
Dynamic variant create for select option High value
Hi ,
I would like to set a dynamic variant for Date filed in selection screen as lower limit as 01/01/2009 and Last day of previous month as hiher limit. For examplae: Lower limit = 01/01/2009 and higher limit as 02/28/2011.
Please help me in creating dynamic variant as mentiond above.
Thanks & Regards,
Venkat N.Hi,
Thank you for your reply and could you please provide if you have any code.
Thanks & Regards,
Venkat N. -
Hi experts,
i need to create dynamic variant for date range (so_date-low, so_date-high): sy-datum-1.
that will bring the data in the report for yesterday.
How can i do this?
i know how can i make variant for so_date-low
i dont know how can i do that on so_date-high.
thanks,
Michal.1. Execute the report and you will get your selection screen then press save
2. system will take u to variant screen , select the line of your date select-options field from the list and scroll right
3. double clik on "selection variable " column and select "D"
4. double clik on "Name of variable" last column and select "Current date - xxx,current date + yyy" system will provide you popup with "Enter a value xxx" and "Enter a value for yyy" and enter value 1 in xxx and 0 in yyy
and save the variant . now your S_DATE_LOW will be system date - 1 ie yesterdays date
a® -
Hi,
How to put current date in report output through variants.
I should not use events, when user selects variants then i should place the current date in my selection-screen.
help full information will be appreciated.Hi Rams,
U have to create a dynamic variant for this.
Fallow these steps.
1. Fill all the selection screen values including date(Current date).
2. Save it as variant(ctrl+S), give variant name and description.
3. In the same screen u can see some check boxes corrosponding to each selection screen parameter.
Now for the date field select the check box under
L Selection variable and then press the push button selection variables in the tool bar.
4. Now u will get the date range in the next screen.
5. Here press the yellow light under D, it will become green colour.
5. Next press drop down(Small arrow pointing down at the end of date)
6. Now u will get a list of options for calculations.
7. Here select current date.
8. Now save the variant.
This completes setting up of dynamic variant.
Now when ever u select this variant it will populate the selection screen with current date and remaining fields with the data u save while creating the variant.
Hope this will solve ur problem.
Thanks,
Vinod. -
I don't know if this is a bug. I have a movie that contains a
dynamic text. When I run it, the text displays fine. But when the
said movie is run through another movie clip (using loadMovie), the
dynamic text won't display. Any ideas why? Thank you.dongzky wrote:
> Actually, there was no code involved. The dynamic text,
with borders around it,
> I tried to put a value for testing. It works fine when
run. But when called
> by another movie clip, although the movie with the
dynamic text still loads,
> the text won't display anymore. Even the borders were
gone.
Than again, it's a bug on your end :)
Dynamic text is a text container, it's to be use with
dynamically given data, from
source file or variable string on timeline. It's not meant to
be for regular text
display. You need to use Static text. The fact that you can
see it it's just flash
being tolerant but it only lasts for as long as the movie is
getting more complex.
You can get away with somethings even tho you should not be
using them, does not
mean they will work all the way. Dynamic text, as said above
is for text that comes
to flash from outside source and this is when it works best.
Best Regards
Urami
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami> -
Dynamic variants for a background job
Hi,
I need to set up a background job for a dynamic variant. To elaborate my selection screen has date ranges which need to change dynamically , if the job is secheduled on weekly basis the selection date range should change automatically in the variant. I got to know that the same is possible through the table TVARV. Can I know about the method of setting up the same?
Thanks,
ShailajaYou can set a dynamic date to today date or some other date without using the table TVARV.
To set the dynamic date:
Save variant on the selection screen.
In the vairant screen, press F4 against your field in the column "Selection Variable"
Select D here.
In the column Name of the variable, press F4 to have the list of the possible rules.
Here you can select "Current date - xxx,current date + yyy" if you want to have certain period.
When you select this system will pop up to put the values for XXX and YYY.
Say for last 7 days, you can set the values XXX as 7 and YYY as0.
But the best way is to change the program, if possible, and fill the select option in the intialization event.
Regards,
Naimesh Patel -
Create Dynamic variant for date field
Hello all,
I need to have the current month year displayed in my selection screen in format MM.YYYY and the field is of type SPMON (Period to analyze - month).
and while saving the variant it is showing only 'T' (entries from TVARVC table) in "selection variable" field and not showing 'D' (Dynamic selection) for the above field.
So,please help me in resolving this issue.
Thanks in advance.hi
good
go through this code,i hope this ll help you to create the dynamic variant.
Please find the sample using RS_CREATE_VARIANT (FM).
It make use of other FM also , just have a look .
Hope this may help you.
REPORT ZEXAMPLE.
DATA: JVARI_DESC LIKE VARID,
RC LIKE SY-SUBRC,
VARIANT_TEXT LIKE VARIT-VTEXT,
JVT LIKE VARIT OCCURS 0 WITH HEADER LINE,
SELPA LIKE RSPARAMS OCCURS 0 WITH HEADER LINE,
PARMS LIKE RSPARAMS OCCURS 0 WITH HEADER LINE,
OBJS LIKE VANZ OCCURS 0 WITH HEADER LINE.
PARAMETERS: P_VAR LIKE RSVAR-VARIANT. "NAME OF VARIANT
JVARI_DESC-REPORT = SY-REPID.
JVARI_DESC-VARIANT = P_VAR.
JVARI_DESC-ENAME = 'EXAMPLES'.
JVT-REPORT = SY-REPID.
JVT-VARIANT = P_VAR.
JVT-LANGU = SY-LANGU.
JVT-VTEXT = 'FUNCTION EXAMPLES'.
APPEND JVT.
CLEAR SELPA.
SELPA-SIGN = 'I'.
SELPA-OPTION = 'EQ'.
SELPA-KIND = 'P'.
SELPA-SELNAME = 'P_VAR'.
SELPA-LOW = P_VAR.
APPEND SELPA.
CHECK IF VARIANT EXISTS
CALL FUNCTION 'RS_VARIANT_EXISTS'
EXPORTING
REPORT = JVARI_DESC-REPORT
VARIANT = P_VAR
IMPORTING
R_C = RC
EXCEPTIONS
NOT_AUTHORIZED = 1
NO_REPORT = 2
REPORT_NOT_EXISTENT = 3
REPORT_NOT_SUPPLIED = 4
OTHERS = 5.
IF RC = 0 AND SY-SUBRC EQ 0.
DELETE OLD VARIANT
CALL FUNCTION 'RS_VARIANT_DELETE'
EXPORTING
REPORT = JVARI_DESC-REPORT
VARIANT = P_VAR
FLAG_CONFIRMSCREEN = 'X'
EXCEPTIONS
NOT_AUTHORIZED = 1
NOT_EXECUTED = 2
NO_REPORT = 3
REPORT_NOT_EXISTENT = 4
REPORT_NOT_SUPPLIED = 5
VARIANT_LOCKED = 6
VARIANT_NOT_EXISTENT = 7
NO_CORR_INSERT = 8
VARIANT_PROTECTED = 9
OTHERS = 10.
IF SY-SUBRC NE 0.
WRITE: 'UNABLE TO DELETE VARIANT:', P_VAR ,'STATUS=', SY-SUBRC.
EXIT.
ELSE.
WRITE:/ P_VAR, 'DELETED'.
ENDIF.
ELSE.
WRITE:/ P_VAR, 'DOES NOT EXIST'.
ENDIF. " ALREADY EXISTS
CALL FUNCTION 'RS_CREATE_VARIANT'
EXPORTING
CURR_REPORT = JVARI_DESC-REPORT
CURR_VARIANT = P_VAR
VARI_DESC = JVARI_DESC
TABLES
VARI_CONTENTS = SELPA
VARI_TEXT = JVT
EXCEPTIONS
ILLEGAL_REPORT_OR_VARIANT = 1
ILLEGAL_VARIANTNAME = 2
NOT_AUTHORIZED = 3
NOT_EXECUTED = 4
REPORT_NOT_EXISTENT = 5
REPORT_NOT_SUPPLIED = 6
VARIANT_EXISTS = 7
VARIANT_LOCKED = 8
OTHERS = 9.
IF SY-SUBRC EQ 0.
WRITE:/ 'VARIANT', P_VAR, 'CREATED FOR PROGRAM', JVARI_DESC-REPORT.
ELSE.
WRITE:/ 'VARIANT', P_VAR, 'NOT CREATED FOR PROGRAM', JVARI_DESC-REPORT.
EXIT.
ENDIF.
CALL FUNCTION 'RS_VARIANT_CONTENTS'
EXPORTING
REPORT = JVARI_DESC-REPORT
VARIANT = P_VAR
TABLES
VALUTAB = PARMS
OBJECTS = OBJS
EXCEPTIONS
VARIANT_NON_EXISTENT = 1
VARIANT_OBSOLETE = 2
OTHERS = 3.
IF SY-SUBRC NE 0.
WRITE : / 'ERROR READING VARIANT CONTENTS.'.
ELSE.
CALL FUNCTION 'RS_VARIANT_TEXT'
EXPORTING
LANGU = SY-LANGU
CURR_REPORT = JVARI_DESC-REPORT
VARIANT = P_VAR
IMPORTING
V_TEXT = VARIANT_TEXT.
WRITE:/ 'VARIANT DESCRIPTION:', VARIANT_TEXT.
LOOP AT PARMS.
CHECK PARMS-LOW NE SPACE OR PARMS-HIGH NE SPACE.
READ TABLE OBJS WITH KEY NAME = PARMS-SELNAME.
WRITE : /2 PARMS-SELNAME, OBJS-TEXT,
45 PARMS-KIND,
PARMS-SIGN,
PARMS-OPTION,
PARMS-LOW,
PARMS-HIGH.
NEW-LINE.
ENDLOOP.
SKIP.
ENDIF.
some other approach....
This function module selects the Selection Screen contents
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
EXPORTING
curr_report = sy-repid
TABLES
selection_table = loc_int_tab
EXCEPTIONS
not_found = 1
no_report = 2
OTHERS = 3.
IF sy-subrc NE 0.
MESSAGE i000 WITH 'Error in RS_REFRESH_FROM_SELECTOPTIONS'(029).
LEAVE LIST-PROCESSING.
ENDIF.
Craete the variant VAR1
CALL FUNCTION 'RS_CREATE_VARIANT'
EXPORTING
curr_report = sy-repid
curr_variant = wf_variant
vari_desc = loc_varid
TABLES
vari_contents = loc_int_tab
vari_text = loc_varit
EXCEPTIONS
illegal_report_or_variant = 1
illegal_variantname = 2
not_authorized = 3
not_executed = 4
report_not_existent = 5
report_not_supplied = 6
variant_exists = 7
variant_locked = 8
OTHERS = 9.
IF sy-subrc <> 0.
MESSAGE i000 WITH 'Error while creating dynamic variant'(028).
LEAVE LIST-PROCESSING.
ENDIF.
reward point if helpful.
thanks
mrutyun^ -
Hello everybody,
Could somebody help me to run a job with a dynamic variant (for instance a report with the changes for the last N days).
I read things about SAP_StoreVariant and RedwoodScript but I'm not able to perform the job...
Thanks for your help.Go through this link...
http://help.sap.com/saphelp_47x200/helpdata/en/d1/802cfc454211d189710000e8322d00/frameset.htm
In this page
ABAP Workbench tools -->
VARIANTS -->
VARIABLE VALUES IN VARIANTS.
Hope this helps u a lot...
reward if it helps u...
sai ramesh. -
Hi,
I have selection options for field as defined as TIME . I need to set dynamic variant for this field as
TIME should be "from"='current time-30 minutes' and "to"='24:59:59'.
This report going to run in 00 hours and 30 hours (48 times ie 24 X 2)
PS : Pl. remember this is for a SAP standard report
Any Info?
a®Naimesh Patel wrote:
> I digged more deeper and found one FM RS_VARI_V_INIT_TIME which fill the options like Current Time, Current Time +/- ???, From Start of Day to Now etc. and Surprisinly all 3 options are hardcoded in it..!!
As you suggested due to hardcoded values here , we could not able to do much on this.
So i came in round away solution. Whenever program A called ( program with TIME selection input) i have called another custom program C . (This custom program will using the following function module RS_VARIANT_CONTENTS, and RS_VARIANT_CHANGE , So get the DEFAULT variant content of program A and change the variant content with LOW as current time - 30 and HIGH with 24:59:59) as preceding job.
In PI 7.01 system program A always called in JOB mode
Thanks for info.
a® -
How i use the selection variable type B in dynamic variant??
I have 2 parameters: month and year. Both have been filled with currenth month and year in background job that will be run every day.
In sap help, is mentioned something about memory ID for to do that but i didn´t understand.
Please, help me!Check this
report zaRs
no standard page heading line-size 255.
parameters : p_month(2) type c.
parameters : p_year(4) type c.
Initialization.
p_month = sy-datum+4(2).
p_year = sy-datum+0(4).
a® -
Dynamic variant real execution value
Hi, Experts!
I would like to know if there is any parameter that fixes the values attributed to a dynamic variant during the execution of a job.
Just to make it clearer, I´ll explain the real situation we face here: We have a job XXX that uses a variant YYY. In this variant there´s a period of dates that is calculated dynamicaly (current date - 5 and current date + 2). The problem is that when I look at SM37 in a given day, the values I see there are calculated based on the current date, not the date the job ran the last time.
Thanks in advance!
AyltonHello
As far i know, in dynamic variant config, it will always show the current date when you try to view the old dated job tooo.
The reason is that the variant will get updated with the latest job run.
Hope it hepls....reward points. -
Variants, Dynamic Value, Dynamic Variants
How do I create a dynamic variant in ECC 6.0. I'm aware of the steps in 3.X and 4.X environments. Any help will be highly appriciated. Thanks in advance.
Please find below procedure to define the dynamic variant in ECC6.0
Step 1: Go to SE38, Enter the program u2013 RBDAPP01 (Program to process inbound IDocs) and click on execute button.
Step2: Enter message type u201CMATMASu201D and Click on the save button
Step 3: To create dynamic value for Created on field, Click on Selection variable for u201CCreated Onu2019 Filed
The F4 for the selection variable shows the following options.
T u2013 Table Variable for TVARVC
D u2013 Dynamic data calculation.
Select D u2013 Dynamic data calculation.
Step 4 : Click on u201CName of the Variable (Input only Using F4) column row for the u201CCreated onu201D field.
F4 option for the u201CName of Variable u201Cprompts to select I/E, Option & Variable Name.
Choose the variable name as u201CCurrent data u2013xxx,Current data + YYYu201D and click on ok button.
Following screen prompts to enter the value. Enter u201C7u201D for the u201Ca values for xxxu201D and 0 for u201Ca value for yyyu201D. As shown in below screen.
Save the variant.
Go back to report selection screen and select variant name as created above. -
How to create Dynamic Variant?
Hi Experts,
One simple doubt pls.,
How to create a Dynamic Variant for my_z_selection_screen?
thanq.hi,
Look at the following Code
Please find the sample using RS_CREATE_VARIANT (FM).
It make use of other FM also , just have a look .
Hope this may help you.
REPORT ZEXAMPLE.
DATA: JVARI_DESC LIKE VARID,
RC LIKE SY-SUBRC,
VARIANT_TEXT LIKE VARIT-VTEXT,
JVT LIKE VARIT OCCURS 0 WITH HEADER LINE,
SELPA LIKE RSPARAMS OCCURS 0 WITH HEADER LINE,
PARMS LIKE RSPARAMS OCCURS 0 WITH HEADER LINE,
OBJS LIKE VANZ OCCURS 0 WITH HEADER LINE.
PARAMETERS: P_VAR LIKE RSVAR-VARIANT. "NAME OF VARIANT
JVARI_DESC-REPORT = SY-REPID.
JVARI_DESC-VARIANT = P_VAR.
JVARI_DESC-ENAME = 'EXAMPLES'.
JVT-REPORT = SY-REPID.
JVT-VARIANT = P_VAR.
JVT-LANGU = SY-LANGU.
JVT-VTEXT = 'FUNCTION EXAMPLES'.
APPEND JVT.
CLEAR SELPA.
SELPA-SIGN = 'I'.
SELPA-OPTION = 'EQ'.
SELPA-KIND = 'P'.
SELPA-SELNAME = 'P_VAR'.
SELPA-LOW = P_VAR.
APPEND SELPA.
CHECK IF VARIANT EXISTS
CALL FUNCTION 'RS_VARIANT_EXISTS'
EXPORTING
REPORT = JVARI_DESC-REPORT
VARIANT = P_VAR
IMPORTING
R_C = RC
EXCEPTIONS
NOT_AUTHORIZED = 1
NO_REPORT = 2
REPORT_NOT_EXISTENT = 3
REPORT_NOT_SUPPLIED = 4
OTHERS = 5.
IF RC = 0 AND SY-SUBRC EQ 0.
DELETE OLD VARIANT
CALL FUNCTION 'RS_VARIANT_DELETE'
EXPORTING
REPORT = JVARI_DESC-REPORT
VARIANT = P_VAR
FLAG_CONFIRMSCREEN = 'X'
EXCEPTIONS
NOT_AUTHORIZED = 1
NOT_EXECUTED = 2
NO_REPORT = 3
REPORT_NOT_EXISTENT = 4
REPORT_NOT_SUPPLIED = 5
VARIANT_LOCKED = 6
VARIANT_NOT_EXISTENT = 7
NO_CORR_INSERT = 8
VARIANT_PROTECTED = 9
OTHERS = 10.
IF SY-SUBRC NE 0.
WRITE: 'UNABLE TO DELETE VARIANT:', P_VAR ,'STATUS=', SY-SUBRC.
EXIT.
ELSE.
WRITE:/ P_VAR, 'DELETED'.
ENDIF.
ELSE.
WRITE:/ P_VAR, 'DOES NOT EXIST'.
ENDIF. " ALREADY EXISTS
CALL FUNCTION 'RS_CREATE_VARIANT'
EXPORTING
CURR_REPORT = JVARI_DESC-REPORT
CURR_VARIANT = P_VAR
VARI_DESC = JVARI_DESC
TABLES
VARI_CONTENTS = SELPA
VARI_TEXT = JVT
EXCEPTIONS
ILLEGAL_REPORT_OR_VARIANT = 1
ILLEGAL_VARIANTNAME = 2
NOT_AUTHORIZED = 3
NOT_EXECUTED = 4
REPORT_NOT_EXISTENT = 5
REPORT_NOT_SUPPLIED = 6
VARIANT_EXISTS = 7
VARIANT_LOCKED = 8
OTHERS = 9.
IF SY-SUBRC EQ 0.
WRITE:/ 'VARIANT', P_VAR, 'CREATED FOR PROGRAM', JVARI_DESC-REPORT.
ELSE.
WRITE:/ 'VARIANT', P_VAR, 'NOT CREATED FOR PROGRAM', JVARI_DESC-REPORT.
EXIT.
ENDIF.
CALL FUNCTION 'RS_VARIANT_CONTENTS'
EXPORTING
REPORT = JVARI_DESC-REPORT
VARIANT = P_VAR
TABLES
VALUTAB = PARMS
OBJECTS = OBJS
EXCEPTIONS
VARIANT_NON_EXISTENT = 1
VARIANT_OBSOLETE = 2
OTHERS = 3.
IF SY-SUBRC NE 0.
WRITE : / 'ERROR READING VARIANT CONTENTS.'.
ELSE.
CALL FUNCTION 'RS_VARIANT_TEXT'
EXPORTING
LANGU = SY-LANGU
CURR_REPORT = JVARI_DESC-REPORT
VARIANT = P_VAR
IMPORTING
V_TEXT = VARIANT_TEXT.
WRITE:/ 'VARIANT DESCRIPTION:', VARIANT_TEXT.
LOOP AT PARMS.
CHECK PARMS-LOW NE SPACE OR PARMS-HIGH NE SPACE.
READ TABLE OBJS WITH KEY NAME = PARMS-SELNAME.
WRITE : /2 PARMS-SELNAME, OBJS-TEXT,
45 PARMS-KIND,
PARMS-SIGN,
PARMS-OPTION,
PARMS-LOW,
PARMS-HIGH.
NEW-LINE.
ENDLOOP.
SKIP.
ENDIF.
some other approach....
This function module selects the Selection Screen contents
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
EXPORTING
curr_report = sy-repid
TABLES
selection_table = loc_int_tab
EXCEPTIONS
not_found = 1
no_report = 2
OTHERS = 3.
IF sy-subrc NE 0.
MESSAGE i000 WITH 'Error in RS_REFRESH_FROM_SELECTOPTIONS'(029).
LEAVE LIST-PROCESSING.
ENDIF.
Craete the variant VAR1
CALL FUNCTION 'RS_CREATE_VARIANT'
EXPORTING
curr_report = sy-repid
curr_variant = wf_variant
vari_desc = loc_varid
TABLES
vari_contents = loc_int_tab
vari_text = loc_varit
EXCEPTIONS
illegal_report_or_variant = 1
illegal_variantname = 2
not_authorized = 3
not_executed = 4
report_not_existent = 5
report_not_supplied = 6
variant_exists = 7
variant_locked = 8
OTHERS = 9.
IF sy-subrc <> 0.
MESSAGE i000 WITH 'Error while creating dynamic variant'(028).
LEAVE LIST-PROCESSING.
ENDIF. -
Hi,
Iam using the following two function modules to craete a dynamic variant.
This function module selects the Selection Screen contents
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
EXPORTING
curr_report = sy-repid
TABLES
selection_table = loc_int_tab
EXCEPTIONS
not_found = 1
no_report = 2
OTHERS = 3.
IF sy-subrc NE 0.
MESSAGE i000 WITH 'Error in RS_REFRESH_FROM_SELECTOPTIONS'(029).
LEAVE LIST-PROCESSING.
ENDIF.
Craete the variant VAR1
CALL FUNCTION 'RS_CREATE_VARIANT'
EXPORTING
curr_report = sy-repid
curr_variant = wf_variant
vari_desc = loc_varid
TABLES
vari_contents = loc_int_tab
vari_text = loc_varit
EXCEPTIONS
illegal_report_or_variant = 1
illegal_variantname = 2
not_authorized = 3
not_executed = 4
report_not_existent = 5
report_not_supplied = 6
variant_exists = 7
variant_locked = 8
OTHERS = 9.
IF sy-subrc <> 0.
MESSAGE i000 WITH 'Error while creating dynamic variant'(028).
LEAVE LIST-PROCESSING.
ENDIF.
Now my problem is I have one parameter 'filename' on selection screen which is of 255 characters lenth , but the internal table loc_int_tab in above function modules can hold up to 45 characters only. But I want to store all the 255 characters in it.
Have you ever comeacross with this problem"
Or do we have any other function modules which will sove the purpose.
Thanks in advance,
Brahma Reddysplit the file path lenghth into diffrent lines ,
say each line has 45 charcters
use fm split the lines into number of charcter
fm is SWA_SPLIT_STRING - here pass ur file path ,length 45 and internal table
internal table output will have diffrent lines,other program is going to concatenate all the lines into one line.
Maybe you are looking for
-
Hi all, I need to do this solution for a BP fact sheet , is to create a SmartForm which can be called using a push button on appl CRMM_ACCOUNT screen. we need to call a smartform which will contain all fact sheet data in it when the user clicks the b
-
MRP User Exit/BAdI for changing plant stock
Hi, I have a client who is wanting to add consignment stock to plant stock during the MRP run for materials with a certain material group. I need to find an exit or a BAdI which is called at an appropriate time to have a developer code this function.
-
Control Waveform Graph - Set Lower Limit and Autoscale Upper Limit
In a waveform graph is their a way to set the lower graph Y limit at zero and then have it autoscale the maximum Y limit as a percentage (150% for example) of the maximum Y graph value ? Direction to examples or a starting point to read up on would b
-
I just had ana OS 10.5.8 update and added some more RAM to my iMac. When I got the computer home my Fire Wire printer was not recognized and the only way I could get the computer to "see" it was to use the USB cable. Does anyone know why this is or h
-
What is the use of PIVOT_FIELD_TAB in FM - EXCEL_OLE_STANDARD_DAT
Hi, In the Function Module 'EXCEL_OLE_STANDARD_DAT' ,in the TABLES---PIVOT_FIELD_TAB is present. can anyone explain me what will be the result of using the PIVOT_FIELD_TAB. Thanks in Advance, Kiranmai.