Dynamic variation of prompt clause based on user selection

Hi,
I would like to know if there is any possibility to change the query to have 'IN' clause or '=' clause based on user prompt selection.
Say, if user enters single value for a prompt, the query should have = clause and when enters multiple input, the query change to IN clause.
HummingBird tool has the capability to dynamically change between = and IN based on the prompt selection.
There seems to be some issue in performance because of the IN clause we’ve used while passing single prompt value when compared to Hummingbird tool.
Is it possible in BI Publisher???

Hi ,
It is not possible to select the IN or = based on Prompt selection directly..
You can Use IN..that will work as = also..
Thanks,
Ananth

Similar Messages

How to create dynamic ed flash charts based on user selected fields in Orac

Hi all,
Can any of the experts please tellme "how to create dynamic ed flash charts based on user selected fields in Oracle apex".
Thanks
Manish

Hello,
Lots of different ways to do this, I blogged about one way (using a Pipelined function) here -
http://jes.blogs.shellprompt.net/2006/05/25/generic-charting-in-application-express/
Other options include using a PL/SQL function returning the string to use as the dynamic query etc.
Hope this helps,
John.
Blog: http://jes.blogs.shellprompt.net
Work: http://www.apex-evangelists.com
Author of Pro Application Express: http://tinyurl.com/3gu7cd
REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone!

Output different data based on user select

Hi everyone,
Quick question, I would like to output different report columns based on user select, eg., users would be presented with two choices in a radiobutton list, eg., 1 and 2.
I have query results that contain columns A, B, C, D, E, F, G.
If user selects 1 then the output should be columns A, B, C, D, E.
If user selects 2 then the output should be columns A, B, C, F, G.
I am sure this is possible and easy? If so, what topic should I be reading/searching internet on?
Please advise.
Thanks!

I would say that this is most often something that your user interface should be dealing with (i.e. which columns should be shown).
There is no way to do that in SQL.
In PL/SQL it is a simple situation of creating two cursors and simply deciding which one to open.
<pre>declare
l_cur sys_refcursor;
begin
if :user_selection = 1 then
open l_cur for select A, B, C, D, E from tbl;
else
open l_cur for select A, B, C, F, G from tbl;
end if;
-- use the cursor
close l_cur; -- or return to user interface
end;
/</pre>
Hope this helps.

[MDX] Define date range based on user selection

Hi All,
I'm trying to define date range (of 3 months) using mdx based on user selection.
This is what I'm trying to do:
- If user select 2013, I would like range to be: from
1 Oct 2013 to 31 Dec 2013
- If user select Aug 2013, I would like range to be: from
1 Jun 2013 to 31 Aug 2013
- If user select 15 Sep 2013, I would like range to be : from
15 Jul 2013 to 15 Sep 2013
It is not a problem to get the upper bound of the range like this:
ClosingPeriod(
[Date].[Calendar].[Date],
[Date].[Calendar].CurrentMember
But I'm not able to get the lower bound of the range:
OpeningPeriod(
[Date].[Calendar].[Date],
ParallelPeriod(
[Date].[Calendar].[Month Number],
2,
ClosingPeriod(
[Date].[Calendar].[Date],
[Date].[Calendar].CurrentMember
Error:If user selection is
15 Aug 2013, I get
14 Jun 2013
If user selection is Apr 2013, I get
(null)
And even more strange, if user selection is
2013, I get 28 Oct 2013
Any idea of how to solve this ?
Thanks,
Guillaume

Hello Guillaume,
Can you please check if the following works for you? By the way, the performance will suffer due to all these IIF, the solution is very complex in order to avoid null in ParallelPeriod.
with member measures.high as MemberToStr(ClosingPeriod(
   [Date].[Calendar].[Date],
   [Date].[Calendar].CurrentMember
member measures.low as
MemberToStr(
iif(ClosingPeriod(
   [Date].[Calendar].[Date],
   [Date].[Calendar].CurrentMember
) IS ClosingPeriod(
   [Date].[Calendar].[Date],
   [Date].[Calendar].CurrentMember
).Parent.LastChild --last date of the month
OpeningPeriod(
   [Date].[Calendar].[Date],
Ancestor(ClosingPeriod(
   [Date].[Calendar].[Date],
   [Date].[Calendar].CurrentMember
), [Date].[Calendar].[Month]).lag(2)
iif([Date].[Calendar].CurrentMember.level is
[Date].[Calendar].[Date]
and
Right(CSTR([Date].[Calendar].CurrentMember.Properties("KEY0")),4)="0429" --take care of 4/29
OpeningPeriod(
   [Date].[Calendar].[Date],
Ancestor(ClosingPeriod(
   [Date].[Calendar].[Date],
   [Date].[Calendar].CurrentMember
), [Date].[Calendar].[Month]).lag(2)
OpeningPeriod(
   [Date].[Calendar].[Date],
   ParallelPeriod(
      [Date].[Calendar].[Month],
      2,
      ClosingPeriod(
         [Date].[Calendar].[Date],
         [Date].[Calendar].CurrentMember
select {measures.low,measures.high } on 0
from [Adventure Works]
where
--[Date].[Calendar].[Date].&[20070815]
--get [Date].[Calendar].[Date].&[20070615]
--[Date].[Calendar].[Date].&[20070530]
--get[Date].[Calendar].[Date].&[20070330]
--[Date].[Calendar].[Date].&[20070429]
--get [Date].[Calendar].[Date].&[20070201]
--[Date].[Calendar].[Calendar Year].&[2007]
--get [Date].[Calendar].[Date].&[20071001]
--[Date].[Calendar].[Month].&[2007]&[4]
--get [Date].[Calendar].[Date].&[20070201]
--[Date].[Calendar].[Month].&[2007]&[5]
--get [Date].[Calendar].[Date].&[20070301]
--[Date].[Calendar].[Date].&[20070228]
--get [Date].[Calendar].[Date].&[20061201]
--[Date].[Calendar].[Date].&[20070831]
--get [Date].[Calendar].[Date].&[20070601]
If this does not work for you, I would suggest opening a ticket with Microsoft Support, with an advisory type of request.
Hope this helps.
Thanks.
Meer Al - MSFT

Dynamic dropdown based on user selection of another dropdown on the same page

hi all, ok, I have a table which contains use data, a name,
and a userID. for the example lets say "Simon Bullen" and my userID
is "999".
on a form I have, there is a dropdown box, which is dynamic
from this table, and allows me to select Simon Bullen, however, I
have a hidden field on the form, which when the user selects "simon
bullen" the hidden field populates with the appropiate U number
from the same table.... no i thought this would do it:
<cfquery name="userNumber" datasource="userList">
SELECT userNumber FROM dbo.Users WHERE Name =
<cfqueryparam value="#form.Name#">
</cfquery>
and then my dynamic form field (hidden) would reference to
this query....
but it doens't work, could somebody please enlighten me? I'm
hoping its something silly
Thanks in advance

You could make the value of the option the UserID and the
option display the name.
If that isn't what you need, I think you'll need some
javascript to populate your hidden field based on what is chosen in
the select.
I think you can modify this:
http://www.javascriptkit.com/javatutors/selectcontent2.shtml
...to populate your hidden field instead of a new select
list.
If there's a way to do that without JS I'm not aware of it.
A third possibility: look up the UserID (based on the name
chosen) after the form is submitted then do with it whatever you
need to.

Reading dynamic table column based on user selection

Hi there,
I am having a problem of reading and manipulating the data stored in a standard SAP table. The following example simulates the table and what i am trying to do:
Table: Storing sales data for sales person
SALES_PERSON    REGION   YEAR   MTH_S1 MTH_S2 MTH_S3 MTH_S4...
Richard S               NORTH    2007     100          200         300        400
John K                    SOUTH    2007      50           100         100        20
Brad P                    NORTH    2007     300          100         100        50
User have have the following selection option:
1. Month.
The program will calculate the sales based on the individual month selected
Example, if user select Month = 3, then program take only MTH_S3 column value
So total sales = 300100100=500
2. Month range
The program will calculate the sales based on the month range selected
Example, if user select Month 2 to 4, then program take MTH 2 to MTH_S4 columns value
So total sales = 400 (for MTH_S2) + 500 (for MTH_S3) + 470 (for MTH_S4) = 1370
How should i write the logic or code for this requirement?
Hope someone can help.
Thanks,
Pang HK

Try something like this
TABLES:
t247.
SELECT-OPTIONS:
s_month FOR t247-mnr NO-EXTENSION.
DATA:
BEGIN OF fs_data,
    person(30),
    area(10),
    year(4),
    mon1 TYPE kbetr,
    mon2 TYPE kbetr,
    mon3 TYPE kbetr,
    mon4 TYPE kbetr,
    mon5 TYPE kbetr,
END OF fs_data,
t_data LIKE STANDARD TABLE OF fs_data,
w_no_months TYPE i,
w_kbetr TYPE kbetr,
w_total TYPE kbetr.
LOOP AT t_data INTO fs_data.
    CLEAR w_kbetr.
    DO 5 TIMES VARYING w_kbetr FROM fs_data-mon1
                                                      NEXT fs_data-mon2.
    IF sy-index IN s_month.
      w_total = w_total + w_kbetr.
    ENDIF.
    ENDDO.
ENDLOOP.
change the value 5, according to the no.of months in ur internal table

Contents of second prompt list based on value selected in first prompt?

I need to display two prompts: "Product Family" and "Products". When the user selects a product family, I need the list of products to be filtered to the selected product family. In other words, the contents of the second prompt's list needs to be based on the value selected in the first prompt. Can this be done in Web Intelligence?

Hello Waters,
Yes, this can be done in web intelligence if you apply cascading prompts at universe level
or
Yes, the second way is use element link in report block between 2 tables one for product family and one for product list ( you don't need prompts in this case...)
Regards
Subbarao M

How to HIde rows based on User Selection

I have a requirement where in I have to hide some rows based on Plant Name selected by USer at the time of opening the report.
Here is the screen shot:-
Here I am seeing two Tag Types MACT and Average when User selects Luling Plant. But When User selects some other Plant I don't want to see Tag Type 'MACT' in this table.
We have a predefine filter for Plant.
How can I achieve that. The data in White Rows is Average values.
Please help.
Regards

Hi Shalini,
Is user selecting Plant Name from the report prompt. If Yes, then try below-
Create a variable-
FilterSelect= If UserResponce("WritePromptTextHere") =" Luling Plant" and TagType inList ("MACT";"Average") Then 1 ElseIf UserResponce("WritePromptTextHere") <>" Luling Plant" and TagType inList ("MACT";"Average") Then 3 Else 2
Apply Filter on "FilterSelect" variable-
FilterSelect=1 and 2
~Anuj

Trying to set attribute value based on user selection of another attribute

I am trying to set an attribute value based on the user's selection of another attribute using JSP EditCurrentRecord. When the user chooses the AreaId from the combo box I want to look up the value of the RgnID, preferrably without the user seeing this field at all. Below is my code which does not work. When I run it I get Error Message: null. Any suggestions are appreciated!!
<jsp:useBean id="RowEditor" class="oracle.jbo.html.databeans.EditCurrentRecord" scope="request">
<%
RowEditor.initialize(pageContext, "MyProject2_package1_SRSecurityModule.UsrAreaWhView");
RowEditor.setTargetUrl("UsrAreaWhView_SubmitInsertForm.jsp");
RowEditor.createNewRow();
RowEditor.setDisplayAttributes("OracleId, RgnId, RegionKey, AreaId");
RowEditor.useEditField("OracleId");
RowEditor.getFieldRenderer("OracleId").setPromptText("Oracle ID");
RowEditor.useEditField("AreaId");
RowEditor.useComboBox("AreaId","AreaWhView","Area","AreaKey");
RowEditor.getFieldRenderer("AreaId").setPromptText("Area");
RowEditor.useEditField("RgnId");
RowEditor.getFieldRenderer("RgnId").setPromptText("Region");
RowEditor.getRowSet().getViewObject().getCurrentRow().setAttribute("RgnId",RowEditor.getRowSet().getViewObject().getCurrentRow().getAttribute("RegionKey"));
RowEditor.setReleaseApplicationResources(true);
RowEditor.render();
%>
</jsp:useBean>

ok, sorry everyone for making it confusing; this is what I am
trying to acheieve;
I would like the user to populate my database with thier
username AND userID. I have a dropdown box with thier username
dynamicly populated already, what I am trying to achieve, is a way
of when the user selects thier username either another dropdown or
a hidden field is automatically populated with the appropiate
userID (to match thier username). Now I could just have two
dropdowns and they select both, but i'd rather avoid the
possibility of mismatches, and that is why I would like it to be
automatic and based on thier username selection...
Does that make sense....?

How to update records in a table based on user selection..

Hi all,
This time the above doubt is totally based on the logic of coding which I tried a lot but didn't get any solution. so atlast I come to sdn site.
please help..
The requirement is like that I have a table with 6 fields (1 primary key and other are nonkeys). If the user inputs some values in the fields on the screen, then a row will be added in the table. Upto this i have done well. but when the user want to change some value in the existing row of the table my program unable to do so. Because I couldn't get any logic to do that as there are 5 nonkey fields, so if any one field is modified then the respective row should be selected first based on the user selection and then it should be updated.
At this point I could not get any idea as it may take a lots of if conditions (I guess) to reach to that particular row.
Please help..
thanks ,
sekhar

Hi Sekhar,
I am afraid, the whole design of your program is wrong, let me explain
Let us say you have two rows(5 non key fields) that the user wants to update and the data in these five non key fields are identical and in your program you are getting a number(which is the key) using a number range object. So you will have two entries in the table for the same data.
And on the update page when the user enters the non key fields, how will the program know(or for that matter any one of us) which record to pick, if you have two identical books and if asked for a book wouldn't you ask which one among these two do you want?
Possible Solution: Identify a possible key maintaining the integrity of the data, that is a combination of the non key fields which will help you identify a unique row and make these fields as key fields in the table.
A more costly solution(if you do not want to change the non key field keys to key fields) would be to, adding a check(using select statement) to see if the non key fields combination already exists in the Z table before inserting a record into the table.
If yes, throw a message to the user and just update the values in the table, else insert the record.
Another solution would be to, use the non key fields to generate a key(using some logic) and using this instead of the number range object.
regards,
Chen

Dropdown display changes based on user selection in previous dropdown list

Hi,
I am really having trouble with this and spent a lot of time researching several blogs, tutorials, youtubes, etc. I just cannot get what I've found to work for me. I am creating a simple form in LiveCycle Designer 8.0. I have a table of 14 rows and four columns (row one is the header). Each cell in the first 3 columns contain a dropdown filling the thirteen rows. The last row is a user entered numerical field. My query is related to the second column's drop downlist (months1) containing two items (24, 38) and the third column drop downlist (hours1) containing 5 items (4,000, 6,000, 8,000, 10,000, and 12,000). In addition, there is a default item in each drop down set at <select>.
I would like to have the instructions and script needed that will display the correct list of choices to the users in the "hours1" drop down list based on what was selected in the months1 dropdown.
For example;
if the user selects "24" in the months1 dropdown, then the hours1 dropdown should display "4,000, 6,000, and 8,000" only.
if the user selects "36" in the months1 dropdown, then the hours1 dropdown should display "6,000, 8,000, 10,000 and 12,000" only.
This type of coding would be great to replicate in other forms I have been tasked to do. Thanks!

This is helping me out. The only thing I am having trouble with is running the script from a function set up as a variable. I have a variable called "Members" set up with the following function:
function TeamMembers()
          TimeSheetSF.EmployeeInfoSF.TeamMemDrop.rawValue = "";
          TimeSheetSF.EmployeeInfoSF.TeamMemDrop.clearItems();
          var myTeam = this.boundItem(xfa.event.newText);
          switch (myTeam)
                    case "Team 0":
                              TimeSheetSF.EmployeeInfoSF.TeamsDrop.addItem("Cheryl");
                              TimeSheetSF.EmployeeInfoSF.TeamsDrop.addItem("Neil");
                              break;
                    case "Team 1":
                              TimeSheetSF.EmployeeInfoSF.TeamsDrop.addItem("Pat");
                              TimeSheetSF.EmployeeInfoSF.TeamsDrop.addItem("Carl");
                              TimeSheetSF.EmployeeInfoSF.TeamsDrop.addItem("Conn");
                              TimeSheetSF.EmployeeInfoSF.TeamsDrop.addItem("Gayle");
                              TimeSheetSF.EmployeeInfoSF.TeamsDrop.addItem("Gene");
                              TimeSheetSF.EmployeeInfoSF.TeamsDrop.addItem("John");
                              TimeSheetSF.EmployeeInfoSF.TeamsDrop.addItem("Mich");
                              TimeSheetSF.EmployeeInfoSF.TeamsDrop.addItem("Malind");
                              TimeSheetSF.EmployeeInfoSF.TeamsDrop.addItem("Alan");
                              TimeSheetSF.EmployeeInfoSF.TeamsDrop.addItem("Maln");
                              break;
                    case "Team 2":
                              TimeSheetSF.EmployeeInfoSF.TeamsDrop.addItem("David");
                              TimeSheetSF.EmployeeInfoSF.TeamsDrop.addItem("Cris");
                              TimeSheetSF.EmployeeInfoSF.TeamsDrop.addItem("Chad");
                              TimeSheetSF.EmployeeInfoSF.TeamsDrop.addItem("Linda");
                              TimeSheetSF.EmployeeInfoSF.TeamsDrop.addItem("Steph");
                              break;
When I add the following to the change event of the first field and run it nothing happens. The drop down in the TeamsDrop drop-down field does nothing.
Members.TeamMembers();
If I add all of the code to the change event without it being wrapped in a function it works. I can't figure what I am doing wrong.
I might add that I am creating the first drop down using a function in a variable and it works just fine.

Getting index of a string array based on user selection in a comboBox

I'm not really sure how to phrase my questions, but here goes.
I have created a string array that holds the values of a ComboBox. Based on which selection the user makes in the comboBox, I need the program to then perform particular calcualtions (based on their selection). I have tried using an ItemListener, but that doesn't seem to work. I've also tried using the ActionListener connected to the ComboBox, again...without results. I'm not sure what I'm looking for exactly, but I know what I want it to do, I'm just not finding the right way to do it. Can anyone help me figure this out?

Here is my entire code. I'm completely confused at where to put the ActionListener or how to make it do what I want. Right now I just have it set up to display a simple message in the displayArea, just so that I could see if it was working. I think once I figure out how to get the right index from the ComboBox array, then I'll be able to add the code I need to perform the calcualtions...it's just getting to that step that's not going so well! Any help is appreciated.
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.text.DecimalFormat;
import java.lang.String;
public class MortCalcSR5 extends JFrame implements ActionListener
     int term = 0;
     double principal = 0;
     double rate = 0;
     double monthlyPyment = 0;
     double interest = 0;
     String[] loanChoices = {" ", "7 years @ 5.35%", "15 years @ 5.5%", "30 years @ 5.75%"};
     //create panel for input
     JPanel inputPanel = new JPanel();
          JLabel mortAmtLabel = new JLabel("Mortgage Amount $");
          JTextField mortAmtField = new JTextField(15);
          JLabel loanSelectionLabel = new JLabel("Loan Selection");
          JComboBox loanSelection = new JComboBox(loanChoices);
          JTextField loanSelected = new JTextField(15);
     //create button panel
     JPanel buttonPanel = new JPanel();
          JButton calcButton = new JButton("Calculate");
          JButton clearButton = new JButton("Clear");
          JButton exitButton = new JButton("Exit");
     //create panel for payment information
     JPanel paymentPanel = new JPanel();
          JLabel paymentLabel = new JLabel("Monthly Payment $");
          JTextField paymentField = new JTextField(15);
     //create panel for text box information
     JPanel textPanel = new JPanel();
          JLabel numPaymentLabel = new JLabel("Payment #");
          JLabel balLabel = new JLabel("Balance");
          JLabel ytdPrincLabel = new JLabel("Principal");
          JLabel ytdIntLabel = new JLabel("Interest");
     //create payment for display area
     JPanel displayPanel = new JPanel(new FlowLayout());
          JTextArea displayArea = new JTextArea(10,30);
          JScrollPane scroll = new JScrollPane(displayArea, JScrollPane.VERTICAL_SCROLLBAR_ALWAYS, JScrollPane.HORIZONTAL_SCROLLBAR_ALWAYS);
     public MortCalcSR5()
          //set size of GUI display
          setSize(400,450);
          setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          Container pane = getContentPane();
          JScrollPane scroll = new JScrollPane (displayArea, JScrollPane.VERTICAL_SCROLLBAR_ALWAYS, JScrollPane.HORIZONTAL_SCROLLBAR_ALWAYS);
          FlowLayout layout = new FlowLayout(FlowLayout.LEFT);
          pane.setLayout(layout);
          //add components to the inputPanel
          GridLayout layout2 = new GridLayout(4,1);
          inputPanel.setLayout(layout2);
          inputPanel.add(mortAmtLabel);
          inputPanel.add(mortAmtField);
          mortAmtField.setText(" ");
          inputPanel.add(loanSelectionLabel);
          inputPanel.add(loanSelection);
          loanSelection.addActionListener(this);
          pane.add(inputPanel);
          //add components to buttonPanel
          FlowLayout layout3 = new FlowLayout(FlowLayout.CENTER, 10, 10);
          buttonPanel.setLayout(layout3);
          buttonPanel.add(calcButton);
          buttonPanel.add(clearButton);
          buttonPanel.add(exitButton);
          pane.add(buttonPanel);
          //add listeners to buttons
          calcButton.addActionListener(this);
          clearButton.addActionListener(this);
          exitButton.addActionListener(this);
          //add components to outputPanel
          FlowLayout layout4 = new FlowLayout(FlowLayout.LEFT, 10,10);
          paymentPanel.setLayout(layout4);
          paymentPanel.add(paymentLabel);
          paymentPanel.add(paymentField);
          pane.add(paymentPanel);
          //add components to textPanel
          FlowLayout layout5 = new FlowLayout(FlowLayout.LEFT, 10,10);
          textPanel.setLayout(layout5);
          textPanel.add(balLabel);
          textPanel.add(ytdPrincLabel);
          textPanel.add(ytdIntLabel);
          pane.add(textPanel);
          //add components to displayPanel
          FlowLayout layout6 = new FlowLayout(FlowLayout.CENTER,10,10);
          displayPanel.setLayout(layout6);
          displayPanel.add(scroll);
          pane.add(displayPanel);
          setContentPane(pane);
          setVisible(true);
     public void actionPerformed(ActionEvent event)
          String fs = (String)loanSelection.getSelectedItem();
          if (fs.equals("7 years @ 5.35%"))          {
               displayArea.setText("yay");
          else
               displayArea.setText("blah");
          JButton command = (JButton)event.getSource();
          if(command==calcButton) //calculate button clicked - run payment event
               Payment();
          if(command==clearButton) //clear button clicked - clear all fields
               mortAmtField.setText(null);
               paymentField.setText(null);
               displayArea.setText(null);
               loanSelected.setText(null); //hidden text field still needs to be cleared
               //loanChoices = null;
          if(command==exitButton) //exit button clicked - exit program
               System.exit(0);
     public void Payment()
          //perform the calculations
//          int mortAmt = Integer.parseInt(mortAmtField.getText());
     //     double loanSelect = Double.parseDouble((String)loanSelected.getText());
          displayArea.append("Calcualations performed!");
     public static void main(String[] args)
          new MortCalcSR5();
/*/calculations
     int mortAmt = Integer.parseInt(mortAmtField.getText()); //get text user entered in mortAmt field - parse it from a string to integer
     int loanTerm = Integer.parseInt(loanTermField.getText()); //get text user entered in loanTerm field - parse it from a string to integer
     double interestRate = Double.parseDouble(interestRateField.getText()); //get text user entered in interestRate field - parse it from a string to double
     int moTerm = (loanTerm*12); //calculate monthly loan term
     double moInterest = ((interestRate/100)/12); //calculate monthly interest rate
     double payment = mortAmt*(moInterest/(1-Math.pow(1/(1+moInterest), moTerm))); //calculate monthly payment amount
     valid = true; //number format is accepted
     paymentField.setText(Double.toString(payment)); //display output
*/

Echo a variable in a form based on user selection

Ok I am very very new to java to the point were I only know how to use pre-made javascripts in my php code so be gentle. :)
First, here is part of a form I have:
<select name = "pulmonologist" >
<option selected="" value="">---Select---
<option value="none">None</option>
<?php
while ($row2 = mysql_fetch_assoc ($results2)) {
        ?><option value = "<?php echo $row2['staff_name'];?>"><?php echo $row2['staff_name'];?></option>
<?php }
?>
</select>Ok now I want to echo the value that the user selects on the SAME page (i.e. before the submit button is pressed) (so I can't do it with php, I need javascript) like this:
<input type="submit" value = "Contact <?php echo $pulmonologist;?>" />Can you tell me how to do this? Thanks!

This is a Java forum, not a Javascript forum. Java is not Javascript.

Change portal language based on user selection in masthead7.3

Hi All,
I am trying to provide the language drop down option in Portal Masthead.
I have created the Hovermenu in Masthead which displayes 2 options(English and German)
When user selects German, the portal should be loaded in german language.
Can you please guide me with the proper event handler which should be called, on clicking Hovermenu Item.
Which URL should be called on clicking Hovermenu Item.
I have checked some SDN links already.
Regards,
Sumangala

Thanks for your answers.
I have already checked those links.
Now th problem what I am facing is,
I am not able to call the function ChangeLanguage through javascript.
I have created a dropdwon using Hovermenu and added English and German.
Now when I click on these the function should be called.
Please help me in getting how setClientSideScript() can be used to call a function.
or any other way to call the function after clicking on Hovermenu Item.
Thanks in advance,
Sumangala

Dynamic screen layout - Hide Field Group until user selects country

Hi.
Does anyone in the PCUI commuity know how to hide a particular reference field group (field group that contains several fields) and only make it visible when the user selects a particular value from a dropdown in a differen field group on the same screen.
Regards
Sergio

Hi,
I am trying to do something similar in Advance search area of Opportunity. I want to hide few fields for non managers. I created field group variant and added that to field group and all the fields. I modified method if_crm_bsp_model_access_il~get_fieldgroup_variant. I put breakpoint at this method and it does get executed but the page doesnt load correct variant. Did you get this to work? if so can you please share your experience on what else do I need to change to make it work.
I have separate thread going regarding this issue. Here is the URL for that:
[SAP CRM: People Centric UI (Read Only Archive);
Thank you,
AP

Dynamic variation of prompt clause based on user selection

Similar Messages

Maybe you are looking for