Dynamic vlan assignment does not work

Hello,
I have been trying to configure dynamic vlan assignment for the employee wlan. Trying to put the employee on vlan 20
Here are the components used
WLC: 2100 Software version: 7.0.240.0
AP: 3502I IOS version: 12.4 Mini IOS version: 7.0
Radius server: tried mutiple radius servers (rsa radius , free radius)
On the WLC:
1. Created a AAA server.
2. Along with management interface(vlan 10), configured dynamic interfaces (vlan 20, vlan 30)
3. AP manager interface is on vlan 40
4. Created WLAN assigned to management interface-- WPA2 (AES) , 802.1x
5. on AAA servers tab - checked authentication servers and assigned the AAA server. authentication priority order is set to only radius
Here, I have 2 options for radius overwrite.
one on the AAA servers tab
second on the Advanced tab
I have selected both. or one at a time
Ports between WLC and switch is a trunk
On the AP:
1. Local mode
2. Port between AP and switch switchport access - vlan 40
On radius server:
configured WLC's management interface as client
and assigned the following attributes
tunnel-type := vlan
tunnel-medium-type = ieee-802
tunnel-private-group-id = 20
When i try to authenticate with an iphone it is successful. But it puts me on the same interface as management interface (vlan10). When i do the packet capture i do see the access-accept but i dont see the attributes.
when i use a radius test utility against the radius server I do receive all the attributes.
Im a newbie on this. Iam i missing something here? any help will be much appreciated.

Kindly check the following link for reference.
sample configuration link
http://www.cisco.com/c/en/us/td/docs/wireless/controller/5700/software/release/3se/security/configuration_guide/b_sec_3se_5700_cg/b_sec_1501_3850_cg_chapter_01110.html
http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-0/configuration/guide/c70/c70intf.html
Trouble shooting link
http://www.cisco.com/c/en/us/support/docs/security/secure-access-control-system/113485-acs5x-tshoot.html

Similar Messages

Added field to dynamic selection screen does not work in FBL5N

hi,
we have added KNA1-KATR5 to the selection screen of FBL5N by using logical database DDF using "view CUS" but it does not work.
Our system is 6.0
is there any OSS note or program that we should add?
many thx.

Refer This:
Additional field selections in FB03

IRR dynamic action filter does not work when condition set.

Hi All
I've set up a filter on an Interactive report using a dynamic action. The fiilter is used to display records that expire within a term ( example 30,60,90 days.) The dynamic action is set to fire On Change. This all works fine as long as I do not set the report condition to only display when P1_DAYS is not null.
I am using a report template that includes #REGION_STATIC_ID# as referenced in this post -
http://anthonyrayner.blogspot.com/2010/07/report-filtering-with-apex-40-dynamic.html
I hoped not to display a blank report region .. wait until after the user selects the "term" before displaying the results. Any workaround suggestions would be appreciated.
Version -
Application Express 4.0.1.00.03
Thanks
MO

Kindly check the following link for reference.
sample configuration link
http://www.cisco.com/c/en/us/td/docs/wireless/controller/5700/software/release/3se/security/configuration_guide/b_sec_3se_5700_cg/b_sec_1501_3850_cg_chapter_01110.html
http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-0/configuration/guide/c70/c70intf.html
Trouble shooting link
http://www.cisco.com/c/en/us/support/docs/security/secure-access-control-system/113485-acs5x-tshoot.html

E5-00 1-touch assignment does not work

I cannot assign 1-touch numbers from the 1-touch application (Control Panel->1-touch). I can assign contacts to the 3,5 and 6 1-touch numbers, but 2, 4, 7, 8, and 9 will not accept one touch assignments. As far as I can tell all of my contacts are in the phone memory. Any ideas?

Hi there Solnan,
If you have as yet been unable to enroll any fingers with Touch ID, I would use the troubleshooting information in the following article to help you resolve the issue here, named:
Use Touch ID on iPhone and iPad
Get help with Touch ID
Make sure that you're using the latest version of iOS.
Make sure that your fingers and the Home button are clean and dry.*
Cover the Home button completely. Don't tap too quickly, don't press down hard, and don't move your finger while Touch ID is scanning. Make sure that your finger touches the metal ring around the Home button.
If you're using a case or screen protector, make sure it doesn't cover the Home button or the surrounding ring. If it does, remove the case or screen protector and try again.
Tap Settings > Touch ID & Passcode and make sure that iPhone Unlock or iTunes & App Store is on. Also make sure that you've enrolled one or more fingerprints.
Try enrolling a different finger.
If you can't enroll any of your fingers, take your device to an Apple Retail Store, Apple Authorized Service Provider, or contact AppleCare for help.
* Moisture, lotions, sweat, oils, cuts, or dry skin might affect fingerprint recognition. Certain activities can also temporarily affect fingerprint recognition, including exercising, showering, swimming, cooking, or other conditions or changes that affect your fingerprint.
Thank you for using Apple Support Communities.
All the best,
Sterling

Is dynamic VLAN assignment supported with web-authentication?

The 7.6.130.0 WLC configuration guides says this:
"Dynamic VLAN assignment is not supported for web authentication from a controller with Access Control Server (ACS)"
How should we interpret this, exactly? Does this mean that dynamic VLAN assignment is supported with web authentication from a controller if some other RADIUS server is used (Eg: FreeRadius, ISE)?

It is not supported with any kind of radius server. The radius attributes ACS uses for pushing those settings (64,65,81) are the same for every other radius implementation. Pushing a QoS profile does work.

Dynamic vlan assignment with 1242AG and IAS not working

I'm having trouble getting the dynamic vlan assignment to work on my 1242AG Cisco Aironet APs. I've seen multiple cases with a similar setup and configuration where it works just fine. I've tried everything I can think of. Any suggestions?
IAS and AD is running on Windows Server 2003
Everything works fine except the vlan assignment. Wireless clients successfully authenticate through IAS and Active Directory, but instead of being switched to the appropriate vlan the client stays in whichever vlan/ssid it originally connected to.
PEAP is the authentication method, using MS-CHAP v2. Naturally I have the attributes in the policy set appropriately, ie:
Tunnel-Medium-Type > 802
Tunnel-Pvt-Group-ID > vlanid
Tunnel-Type > VLAN
On the AP:
Cisco 1242AG, C1240 Software (C1240-K9W7-M), Version 12.4(3g)JA, RELEASE SOFTWARE (fc2)
I've attached the config for the AP, which shows that I have two vlans/SSIDs set to cipher, aes, network eap, wpa, etc. I noticed that if the
Tunnel-Pvt-Group-ID attribute is set to a vlan id that doesn't exist on the AP then the AP makes an event log saying so.

Good! Well to answer your questions, IAS is sending numbers, i.e. Tunnel-Pvt-Group-ID > 129
I did view the debug from an AP which showed the Tunnel attributes being recieved from the radius server (I'll have to wait until Monday to get a copy though).
I see I don't have that line "aaa authorization network default group rad_eap",
So I'll have give it a try, (maybe I can remote in so I don't have to wait until Monday).
Thanks,
Jason

JSF : Dynamic link generated by commandLink does not work

In the following code, without <f:verbatim>, it is giving "Duplicate ID in the view" Exception. But with <f:verbatim>, the links generated by commandLink does not work. Please help me to solve this problem.
Thank you in advance.
Regards
Abdul
<%-- jsf:pagecode language="java" location="/src/pagecode/eservice/DisplayMoreEServices.java" --%><%-- /jsf:pagecode --%>
<%@ include file="/includes/g_common_include.jsp" %>
<%@page import="java.util.Map"%>
<%@page import="bh.com.cio.egov.EGOVConstants"%>
<%@page import="javax.portlet.PortletSession"%>
<%@page language="java"%>
<%
     PortletSession ses = renderRequest.getPortletSession();
     Map eServiceCatMap = (Map) ses.getAttribute(EGOVConstants.REQ_ESERVICE_LIST_BY_CAT);
     renderRequest.setAttribute(EGOVConstants.REQ_ESERVICE_LIST_BY_CAT,eServiceCatMap);
%>
<%@page import="bh.com.cio.egov.vo.EServiceVO"%>
<f:view>
     <script type="text/javascript">
          function blinkThis(id, color, timeout)
               var idElem = document.getElementById(id);
               if(idElem)
                    idElem.getElementsByTagName('span')[0].style.color = color;
                    setTimeout('switchColor(\'' + id + '\', \'#8A7C5B\', ' + timeout + ')', timeout);
          function switchColor(id, color, timeout)
               var idElem = document.getElementById(id);
               if(idElem)
                    idElem.getElementsByTagName('span')[0].style.color = color;
                    setTimeout('blinkThis(\'' + id + '\', \'#FF3030\', ' + timeout + ')', timeout);
     </script>
<f:loadBundle basename="nls.egovresource" var="nls"/>
<hx:scriptCollector id="scriptCollector1">
     <h:form id="form2">
<f:verbatim>
          <div class="header-top">
               <h:outputText value='#{nls["eservice_label_title"]}'></h:outputText>
          </div>
          <c:forEach items="${requestScope.REQ_ESERVICE_LIST_BY_CAT}" var="categoryVOs" varStatus="catIndex">
               <table width="99%" border="0" align="center" cellpadding="0" cellspacing="0">
                    <tr>
                         <td> </td>
                         <td class="gray1" height="30px">
                                   <c:out value="${categoryVOs.value.category.categoryName}" escapeXml="false"></c:out>
                         </td>
                    </tr>
                    <tr>
                         <td width="2">
                              <div align="right">
                                   <img src='<%= imageRootDir + "dot.png"%>' width="4" height="1" />
                              </div>
                         </td>
                         <td width="100%" >
                              <table width="99%" border="0" align="center" cellpadding="0" cellspacing="0">
                                   <c:forEach items="${categoryVOs.value.eservice}" var="service" varStatus="serviceIndex">
                                   <%
                                        EServiceVO serviceObj = (EServiceVO) pageContext.getAttribute("service");
                                        String action = null;
                                        int serviceId= -1;
                                        if(serviceObj!=null)
                                             action = serviceObj.getServiceAction();
                                             serviceId = serviceObj.getServiceId();
                                        if(action!=null && action.startsWith("$"))
                                   %>
                                   <c:set var="jstl_to_jsf_serviceName" value="${service.serviceName}" scope="request"/>
                                   <c:set var="jstl_to_jsf_url_en" value="${service.serviceAction}" scope="request"/>
                                   <c:set var="jstl_to_jsf_url_ar" value="${service.serviceActionAr}" scope="request"/>
                                   <tr>
                                        <td height="17">
                                             <table width="100%" border="0" cellspacing="0" cellpadding="0">
                                                  <tr>
                                                       <td width="95%" id="extMoreCell_${catIndex.index}_${serviceIndex.index}">
                                                            <img src='<%= imageRootDir +"arrow1.png"%>' width="15" height="16" border="0"/>
                                                            <h:commandLink styleClass="links menu-txt" action="#{pc_EServiceView.doExternalLinkAction}">
                                        <h:outputText value="#{jstl_to_jsf_serviceName}" styleClass="menu-txt"/>
                                             <f:param name="PARAM_ESERVICE_URL_EN" value="#{jstl_to_jsf_url_en}"></f:param>
                                             <f:param name="PARAM_ESERVICE_URL_AR" value="#{jstl_to_jsf_url_ar}"></f:param>
                                             <f:param name="JSP_ACTION" value="ACT_EXTERNAL_ESERVICE"></f:param>
                                        </h:commandLink>
                                                       </td>
                                                  </tr>
                                             </table>
                                             <script type="text/javascript">
                                                  <c:if test="${service.serviceId eq '53'}">
                                                       blinkThis('extMoreCell_7_3', '#FF3030', 1000);
                                                  </c:if>
                                                  <c:if test="${service.serviceId eq '54'}">
                                                       blinkThis('extMoreCell_7_4', '#FF3030', 1000);
                                                  </c:if>
                                                  <c:if test="${service.serviceId eq '55'}">
                                                       blinkThis('extMoreCell_7_5', '#FF3030', 1000);
                                                  </c:if>
                                                  <c:if test="${service.serviceId eq '56'}">
                                                       blinkThis('extMoreCell_0_8', '#FF3030', 1000);
                                                  </c:if>
                                                  <c:if test="${service.serviceId eq '57'}">
                                                       blinkThis('extMoreCell_8_8', '#FF3030', 1000);
                                                  </c:if>
                                                  <c:if test="${service.serviceId eq '59'}">
                                                       blinkThis('extMoreCell_1_8', '#FF3030', 1000);
                                                  </c:if>
                                                  <c:if test="${service.serviceId eq '58'}">
                                                       blinkThis('extMoreCell_5_6', '#FF3030', 1000);
                                                  </c:if>
                                                       <c:if test="${service.serviceId eq '28'}">
                                                       blinkThis('extMoreCell_1_4', '#FF3030', 1000);
                                                  </c:if>
                                                       <c:if test="${service.serviceId eq '20'}">
                                                       blinkThis('extMoreCell_5_3', '#FF3030', 1000);
                                                  </c:if>
                                                       <c:if test="${service.serviceId eq '60'}">
                                                       blinkThis('extMoreCell_7_6', '#FF3030', 1000);
                                                  </c:if>
                                             </script>
                                        </td>
                                   </tr>
                                   <tr>
                                        <td bgcolor="#FAF9FA" background='<%= imageRootDir + "line-bg-eservices.png"%>'><img src='<%= imageRootDir +"line-bg-eservices.png"%>' width="2" height="1" border="0"/></td>
                                   </tr>
                                   <%}
                                   else if(action!=null)
                                   %>
                                   <c:set var="jstl_to_jsf_serviceName" value="${service.serviceName}" scope="request"/>
                                   <wps:urlGeneration contentNode="${service.serviceAction}" allowRelativeURL="false" keepNavigationalState="true">
                                   <%
                                   //String urlC = "http://"+renderRequest.getServerName()+":"+renderRequest.getServerPort()+wpsURL;
                                   String urlC = "" + wpsURL;
                                   %>
                                   <c:set var="url" value="<%=urlC%>" scope="request"/>
                              </wps:urlGeneration>
                                   <tr>
                                        <td height="17">
                                             <table width="100%" border="0" cellspacing="0" cellpadding="0">
                                                  <tr>
                                                       <td id="intMoreCell_${catIndex.index}_${serviceIndex.index}">
                                                       <img src='<%= imageRootDir +"arrow1.png"%>' width="15" height="16" border="0"/>
                                                       <hx:outputLinkEx styleClass="links menu-txt" value="#{url}">
                                                            <h:outputText value="#{jstl_to_jsf_serviceName}" styleClass="menu-txt"></h:outputText>
                                                       </hx:outputLinkEx>
                                                       </td>
                                                  </tr>
                                             </table>
                                        </td>
                                   </tr>
                                   <tr>
                                        <td bgcolor="#FAF9FA" background='<%= imageRootDir + "line-bg-eservices.png"%>' ><img src='<%= imageRootDir +"line-bg-eservices.png"%>' width="2" height="1" border="0"/></td>
                                   </tr>
                                   <%
                                        %>
                                   </c:forEach>
                              </table>
                         </td>
                    </tr>
               </table>
          </c:forEach>
          </br>
          <h:messages styleClass="messages" id="messages1"></h:messages>
          </f:verbatim>
          </h:form>
     </hx:scriptCollector>
</f:view>

1) Throw your code away and use h:dataTable instead of c:forEach to render a table of dynamic size.
or:
2) Hand-assign every UIInput and UICommand element inside the loop an unique ID. E.g. "commandLinkId" + loopIndex

Dynamic image in the template builder plug-in does not work

Hi all,
The documentation says:
Direct Insertion
Insert the jpg, gif, or png image directly in your template.
+...This works obviously+
URL Reference
1. Insert a dummy image in your template.
2. In Microsoft Word's Format Picture dialog box select the Web tab. Enter the following syntax in the Alternative text region to reference the image URL:
url:{'http://image location'}
For example, enter: url:{'http://www.oracle.com/images/ora_log.gif'}
+...This works too when I hardcode an url as url:{'http://www.google.com.tr/images/firefox/mobiledownload.png'}+
Element Reference from XML File
1. Insert a dummy image in your template.
2. In Microsoft Word's Format Picture dialog box select the Web tab. Enter the following syntax in the Alternative text region to reference the image URL:
url:{IMAGE_LOCATION}
where IMAGE_LOCATION is an element from your XML file that holds the full URL to the image.
+...This, however, does not work.+
I use Apex' report query tool and My query is like
select 'http://www.google.com.tr/images/firefox/mobiledownload.png' IMAGE_LOCATION from ... (a single result set for my template)
the xml data is generated with an IMAGE_LOCATION tag. I load it to word template plug-in. The Url successfully displays in the report if I make it a plain-simple field.
But when it's in the image format->web->alt text as url:{IMAGE_LOCATION} no image displayed.
I need to keep this design procedure simple so a simple word user could design a report via using just template builder plug-in. I don't wish to explore the xsl-fo area...yet.
Could you tell me why I can't get this url:{IMAGE_LOCATION} to work?
Regards
PS: My BI version: 10.1.3.4.1
Edited by: oeren on Jun 8, 2011 12:28 AM

Oeren,
I stumbled across this little tidbit buried in the BI Publisher forum: Dynamic Images in rtf
Glad you are up and running!
Joshua

Dynamic Height in Graphs does not work properly when the graph is in an list

Help please,
I have an report in SQL Server 2008 (SP1) Reporting Services which uses Dynamic Height to dynamically increase the size of the graph for the data. For a single dataset this works great!
When I place this graph in a list/tablix (to display this graph on each group) things go bad... Only the first graph on every page is resized, all other graphs on the same page are equal in size of the first!
When I place a pagebreak on the lists property all graphs are drawn fine!! But then I will have a page for every question in my data (which can be a lot!)
What is going on here? Please help.

Hi Jerry,
thanks for your reply, but this does not work. The graphs are now all the same size (the size of the first one that is), and on the same page for that matter...
It looks like the renderer calculates the value of the dynamic height only once on a page in stead of each graph. That's a bug in my opinion.
Any suggestions on how to fix this?
The inner workings of the report are like this: The data contains anwers from a survey by question, so i have a unknown count of answers with each question; I placed a list on my report with a groupingproperty on the question asked. On this list i place a horizontal bar-graph which must grow in height when it is too small. The dynamic height should be calculated like this =70 + (CountDistinct(AnswerValue.Value)*10) & "pt".
When i place this calculation in a textbox, every item in the group is calculated correctly. Each graph is drawn, but the graphs are sized only to the size of the first graph on the page. When I place a pagebreak after each list-repeat (so i get each question on a seperate page) each graph is drawn correctly! This results however in more than 100 pages with all used for just a few centimeters (think about trees!).
I'm using SQL 2008 / SSRS2008 with SP1 by the way ( without SP1, the behaviour is the same).
Any more suggestions are appreciated.
Danny

Profit center assignment in 3KEH does not work

Hello,
I make posting (FB50) to a balance sheet account to which a profit center is assigned in t-code 3KEH (Additional Balance Sheet and P&L Accounts). I do not input any profit center in FB50. As a result of this posting I expect that the line item should be visible on the assigned profit center. Unfortunately this line item is not transferred to Profit Center Accounting - line item is not visible in KE5Z report. But when I input the profit center in FB50 manually, then the line item is visible on the profit center.
Could you please give me advice, what could be the reason that the assignment of profit centers to accounts in t-code 3KEH does not work?
I checked the settings in 1KEF and see that online transfer and line items transfer are allowed in Profit Center Accounting.
Best regards,
Robert

Hi Robert,
If you are using NewGL, you can then use trx. FAGL3KEH to set a default profit center on company code level.
Please read also note 826357. I hope this helps.
Best Regards,
Vanessa.

User WF-BATCH and BAPI_PO_RELEASE does not work without printer assigned

Hello Gurus,
The function BAPI_PO_RELEASE is used in our PO approval workflow, but this one does not work till the user WF_BATCH has no printer defined in USR01-SPLD. This is a strange behavior because the output message assigned to the PO has a message transmission medium equals to 5 (External send) => not print.
Does someone have already met the same issue?
How this could be solved without assigning a default printer to user WF_BATCH?
Kind regards
Chris

Hello Tison,
we're using also the WF-BATCH user having no default printer assigned and it works fine with the final release.
However, there's usually the output message NEU with a prerequesite maintained that the PO has to be finally released. So this way there can be an additional output message found upon releasing. But we have a printer assigned using the condition records and we're not using the type that you've specified.
So I'd guess that, indeed, the problem lies within the message. You could copy the WF-BATCH user to a dialog user and release the purchase order in dialog and see what happends.
With the very best wishes,
Florin

Assigned F key to play an action does not work. Why? Using cs6 iMac and wireless key board

Assigned F key to play an action does not work to play the action on an image. When the F key is selected it seams to control computer attributes rather than the play action assigned in photoshop. Why? Using cs6 iMac and wireless key board.
Is this a possible preference setting in mac or is it a setting in cs6 photoshop ? Help and knowledge will be appreciated.

*** Moderator Action ***
This networking question has been moved from the Solaris 10 discussion space,
to the Solaris Networking discussion space, for closer topic alignment.
Whereas there may be IPV6 nuances specific to your Solaris 10 environment and to the hardware, this appears to be a discussion that may be more global in effect.

Product: Accessories Assignment block - link does not work

Dear all,
We have an assignement block 'Accessories' to link products together.
However, the link does not work :
If I click on the first link, nothing happens.
Is there any customizing to maintain for that point?
Thanks a lot,
Regards,
Emilie.

Hi ,
See if this link is helpful for you.
Product Proposal -Accessory assignment block cannot be expanded, CRM UI 7.0
Rgds
Hari

Dynamic image does not work in the template builder plug-in (Apex-BI Intgr)

Hi all, I posted this problem in the BI Publisher topic but nobody responded maybe this is because mods thought this is an Apex-BI integration issue.
If I'm in the wrong place, please do warn me.
The documentation says:
Direct Insertion
Insert the jpg, gif, or png image directly in your template.
...This works obviously
URL Reference
1. Insert a dummy image in your template.
2. In Microsoft Word's Format Picture dialog box select the Web tab. Enter the following syntax in the Alternative text region to reference the image URL:
url:{'http://image location'}
For example, enter: url:{'http://www.oracle.com/images/ora_log.gif'}
...This works too when I hardcode an url as url:{'http://www.google.com.tr/images/firefox/mobiledownload.png'}
Element Reference from XML File
1. Insert a dummy image in your template.
2. In Microsoft Word's Format Picture dialog box select the Web tab. Enter the following syntax in the Alternative text region to reference the image URL:
url:{IMAGE_LOCATION}
where IMAGE_LOCATION is an element from your XML file that holds the full URL to the image.
...This, however, does not work.
I use Apex' report query tool and My query is like
select 'http://www.google.com.tr/images/firefox/mobiledownload.png' IMAGE_LOCATION from ... (a single result set for my template)
the xml data is generated with an IMAGE_LOCATION tag. I load it to word template plug-in. The Url successfully displays in the report if I make it a plain-simple field.
But when it's in the image format->web->alt text as url:{IMAGE_LOCATION} no image displayed.
I need to keep this design procedure simple so a simple word user could design a report via using just template builder plug-in. I don't wish to explore the xsl-fo area...yet.
Could you tell me why I can't get this url:{IMAGE_LOCATION} to work?
Regards
PS: My BI version: 10.1.3.4.1

Hi Oeren,
your steps seem basically to be correct. I have a tutorial how to do this here (in german)
http://www.oracle.com/webfolder/technetwork/de/community/apex/tipps/pdf-dyn-images/index.html
when you see the URL corrently as long as you have it as a plain text field, the XML tag and the
referencing seem to be OK.
Here are two thought - the issue might be one of these ...
How did you insert the dummy image into the word document - did you do it via "insert" or
via "link to file". "Link to File" does not work - you must choose the simple "insert".
Another one: Does your BI Server have a connection to the internet - is the proxy server correctly set ..?
Does this help ..?
Regards
-Carsten
Cloud Computing mit APEX umsetzen. Jetzt!
http://tinyurl.com/apexcloudde
SQL und PL/SQL: Tipps, Tricks & Best Practice
http://sql-plsql-de.blogspot.com

I'M AN AMERICAN ON TEMPORARY ASSIGNMENT IN ITALY AND CANNOT GET TO ANY HELP SOURCE ONLINE OR BY THE PHONE NUMBERS LISTED ONLINE. I'M TRYING TO RENEW MY ONE TO ONE SUPPORT PROGRAM AND THE "RENEW NOW" LINK DOES NOT WORK! HELP!

APPLE SENT ME AN E-MAIL WITH A LINK TO RENEW MY ONE TO ONE SUPPORT. THE LINK DOES NOT WORK. AFTER I LOG INTO MY APPLE ACCOUNT AND CLICK "RENEW NOW" FOR ONE TO ONE, AN ERROR MESSAGE APPEARS SAYING "PAGE NOT FOUND". AMAZING. WHEN I TRY TO CALL THE TOLL FREE APPLE SUPPORT NUMBER FROM MILAN, ITALY WHERE I AM NOW LIVING, IT DOESN'T WORK. THE ITALIAN SUPPORT DESK APPEARS TO BE AVAILABLE ONLY ON WEEKDAYS DURING NORMAL BUSINESS HOURS. HOW CAN I REACH A LIVE APPLE SUPPORT PERSON?

Start by going here - https://expresslane.apple.com/GetproductgroupList.action?locale=it_IT
Best of luck.

Dynamic vlan assignment does not work

Similar Messages

Maybe you are looking for