Dynamic WD Component iView not visible?

Hi all
I am using a WD Comp iView. Source view is triggering a page service to set up a target view on the WD Comp iView place holder. Even though i face no exceptions the WD Comp iView is invisible. I have checked all ppties but of no avail. I m NOT using OBN, it is just a page service. The iView are all WD views, can any one please help? Thank you.
regards
LNV

Hey Carol,
I was kinda facing a similar problem. Could you please tell me how exactly you solved the problem. Will be a great help.
Regards

Similar Messages

View of Component Is Not Visible.

Hi all,
I am new to the wbe dynpro. I have an issue.
I am using ALV to Display the selected data. Its displaying Correctly in alv table i have made one field to be link which will navigate to another view.
When i click the link i am getting the following error View of Component Is Not Visible.Navigation Is Not Possible
can any help me to resolve this problem.
Thanks in Advance,

Hi Kedar,
In view1 i have created a container i am embeded the view in tat container its displaying correctly..
In tat view2 iam having the ALV table in this i have link and if i press this link it should navigate to view3.
Thanks in Advance.

View of Component Is Not Visible. Navigation Is Not Possible

Hi All,
I have copied Window1 into Window2 and when I try to navigate from view1 to view2 in the copied window(window2),the dump "View of Component Is Not Visible. Navigation Is Not Possible " is thrown.
I have tried recreating the navigation links in the second window as well,but no luck.
Can any one please help me out,this is very uregnt...
Thanks,
Salma

Hi Salma,
Are you trying to navigate between the views of 2 different windows? If that's the case then you can proceed as follows:
Create 2 views and 2 windows and assign first view to first window and second view to second window. Also create an [exit plug|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/ca3351508f04e7e10000000a42189c/frameset.htm] for window1 with parameter URL of type string.
Note:
when you create windows automatically an interface view will also create with same name.
Now create application1 for window1(nothing but give interface1 ) in the same way create another application and assign corresponding interface view.
Then write your logic in the onAction method of view1,call the exit plug of window1 then pass the URL of second application.
Regards,
Uday

Details button on iView not visible..Please guide :)

Hello All,
Am working on a CRM iView. As in other EP iViews, am not able to view the Details icon which appears in the right corner of iView tray.
I have set the properties like Add to Favorites, Refresh which would be visible (context menu) in the above mentioned icon.
How can I enable this icon?
Awaiitng Reply.
Thanks & Warm Regards,
Ritu

Hi Karin,
Thank you for your reply and I found a way out of this.....but its not exactly what i am looking for
in an iView, when you view the properties, you get propeties like iView Tray along with other properties which when enabled are visible/accessing as context menu in the Options icon (which is along with the Collapse icon) but inspite of enabling it, when you preview it, it is not visible. you need to attach it to a page to view its Tray options.
so by doing this i got my solution but what i wanted to know that there are ways that inspite of doing what i mentioned above, i can still hide it.
I think there was a WebLog on this but dont remember now.
Please do let me know ur suggestions for the same......
Awaiting Reply.
Thanks & Warm Regards,
Ritu

IView not visible for a single user

Hi All,
I am facing the a problem in our client's portal. The application is not visible for one of our client user on the portal. When he clicks on the Role->Workset->Application name, the IView is not displayed on the screen. Instead, blank page is shown.
This is happening only to him. Other users are able to see the application and run it. I even tried by removing the roles assigned to him which are related to the application and re-assigned it. But the problem still persists.
He is facing this problem only from past 2 days. Till then it was working fine.
Please let me know how can this be solved.
Regards,
Poojith MV

Hi,
Firstly, we do not have the personalization option on the portal. We also requested the user to try the portal on a different which we thought could be a browser problem.
However, the result is same on a different machine. But other users who use the same system are able to view the application. I am unable to figure out what could be wrong for just one user?
The setting "Entry Point" is set to "yes".
The latest update is that, the user has 2 id's created for himself with the same portal roles. The second user id is working fine, but the first user id is failing to view the application
Regards,
Poojith MV

Iviews not visible in SAP PLM 7.0 portal.

Good morning,
When i navigate to 'Product engineering' tab in the portal, there are a set of iviews available in the content area.
These are :-
1. Work environment.
2. Search
3. My contexts.
4. My objects..
These iview headers are visible with the title but no content of these iviews are visible/accessible.
On clicking on the expand tray/collapse tray icon there is no action. (All i could make out is that there is a thin line added when i click on the expand tray icon).
There is no way i can access these iviews.
Is there something i am missing out ?
Request some pointers/inputs here.
regards,
abhishek
P.S : I am not sure if this issue with iviews has anything to do with the version of java installed (mine is 1.6.0_16)

HI Abhishek
i understand u are using EP for hosting the SAP PLM 7.0 module. have u tried using the netweaver business client ?
Can u send in detail the procedure u have adopted for Installation of PLM 7.0 & hosting in EP?
Also what function have u activated apart from teh WEB-UI?
Or is ur issue resolved ?
pls share ur inputs..
thanks
john

Iview not visible

Hello,
i have two different roles and every role has a workset. I have merged these both worksets and set as an entry point. One of the worksets consists only one iView. This iView should be displayed on the second level of the top-level-navigation.
Now i have the problem that I can see the navigation entry on the second level but the content of the iView is not displayed. I can see only an empty background.
If I test the iView in the preview it works fine.
What is wrong or what can I do?
Any ideas?
Regards
Philipp

Hi Philipp,
Are you using the same userid to do the preview and to access the iView through the role. If you are using different users then may be the other user does not have correct data/profile associated with it in the backend. Have a look into it and let me know.
Regards
Mukesh

Universal Worklist iView not visible///

Hi All,
We have installed EP & I have done the required configuration from SAP HCM module side & everything is working on fine except that I'm not able to see the My Organizer iView (Universal Worklist iView) in the ESS. I can see the other iViews like Employee Search, Working Time, Travel & Expenses etc. My workflows are also working properly just that the iView is not appearing on ESS. Please suggest what configuration is missing & how to do this config.
System Details:
EP version: 7.0
BP ESS/MSS: 11
EHR & SAP HCM package level: 24
Regards,
VJ

have you assigned the standard roles ie for portal and ess role
check in UWL administration
Does the same issue occur when you go to Content Administration and
preview the iview with the following PCD address (Standard UWL iview
provided by SAP)?
Portal Content/Content Provided by SAP/End User Content/Standard
Portal Users/iViews/com.sap.netweaver.bc.uwl.iviews/Universal
Worklist
check the roles and permission assigned to this user again
Please see the UWL Wiki @
http://wiki.sdn.sap.com/wiki/display/BPX/UWL%20FAQ *

IView not Visible in portal content Area

Hi experts,
i got a problem when i try to access to the Area 'Travel and Expenses' of the portal after logging in.
The Area should be point to a Page involving 2 IView, one of them contain the visualization of 4 links and the other one pointed to a custom Application.
If i try to reach the area through the quick link in the main page the Applications doesnu2019t come up and i receive a partial visualization of the page, while if i reach the Area clicking the Tab at the top of the page
i get the right visualization of the Area.
Having a look to the resource pointed to the Area i'm really sure that the PCD is correct.
Why do i get two different visualization of the same object?

HI Stefano
Please check the following links:
http://help.sap.com/saphelp_nw2004s/helpdata/en/59/d516690e854c7090ae15bf492a869f/content.htm
and
http://help.sap.com/saphelp_nw04/helpdata/EN/f5/eb50360e6a11d7b84900047582c9f7/content.htm
I hope this helps
Regards
Chen

Iviews in home page not visible when I assign eu_role to portal users

Hey guys,
For the tool area search, I had access denied error. So I have assigned eu_role to the portal users and I am able to search now in the tool area.. But the problem is when I assign this eu_role to the portal users I am not able to see some iviews in my home page.. Like I had webdynpro iview and km document iview which are not visible now. And in place of KM document iview its showing me with this message:
Links :There are no items to display (Organize Entries)
Suggest me with some help.
Regards
PP

Hi Priyanka,
Just refer these helps for getting idea on PCD Repository Manager.
http://help.sap.com/saphelp_nw04/helpdata/en/76/a8934259a5cc6ae10000000a155106/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/b2/d59a4271c80a31e10000000a1550b0/content.htm
It is clearly mentioned in this document that ,
<i>To index the PCD repository, always choose the Portal Roles Search service. Do not choose the services TREX Search or TREX Search and Classification, because these services index the entire PCD. Thus, the search results would also contain iViews and portal pages that are not part of the role of the logged-on user. This ensures error-free navigation.</i>
Regards,
Kishor Gopinathan

Integration Scenario - Component not visible

Hi all,
I have two s/w components - say main component and sender component. Both belong to the same product version.
I have created an integration scenario in the main component and I want to create a swim lane corresponding to 'actions' that are already created in the sender component.
So, when I choose "Insert application component" in the scenario's swim lane area, and select the product version, it does NOT show the sender component !
Hence I am unable to include the actions of sender component in the integration scenario.
I have also checked from SLD that there are few more components (like the sender component) that are assigned to the same product version, but still not visible while creating a swim lane, as mentioned above.
I have tried the option of clearing SLD data cache, but it didn't help.
What can be done about this ?
Regards,

Hi,
did you make those software components dependet?
just like in my weblog?:
/people/michal.krawczyk2/blog/2005/08/26/xi-are-you-independentfrom-your-dependencies
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

New fields created in MDM Console not visible on Portal iViews

Hi All
I would like to ask you. I recently encouraged very strange and annoying problem. We are developing Vendor repository. Menatime we have created some iViews and pages on the Portal. All of them are displayed from Main table. We can see all fields and added/deleted records.
However I can not add any new fields (from MDM Console main table) we have created. That is whired because I only can see all fields beeing in repository for long time now, but all new fields (from that same table) ar not visible on portal.
I tried few options with creating new and different iViews. No help. All the time I can vise old fields from repository but new one are not available.
Can you plase advice what is/ may be wrong?
Thank you in advance.
BR
Rafal

Hi All
After restarting server problem solved. That mean there is a casching problem. After investigation here is service to restart:
J2EE engine
Thank you for help.
BR
Rafal
Edited by: Rafal Paczynski on Sep 29, 2011 12:21 PM

Iview body not visible

Hi all,
Our requirement is that when the user opens the universal worklist for MSS, the user should see the UWL as well as an overview of the HCM processes overview (A WD ABAP application that we have developed).
What i have done is assigned 2 iviews to the UWL page -
(1) UWL iview
(2) The HCM processes overview iview
When i call this page from the detailed navigation, the page opens and both the iviews are displayed one beneath the other.
However, when i call the same page from the area page, i see the first iview ( UWL) completely, and i only see the tray name of the second iview. i.e. the body of the second iview is not visible in the page.
I am unable to place the possible reason for this behaviour as the same page is being called from both the detailed navigation and the area page.
Any pointers in this regard will be appreciated.
TIA.
Regards,
Diana

Hi,
We are now calling the HCM process overview page in the area page instead of the UWL page. So what we have now is the HCM process ovewview page renamed as UWL calling the standard HCM process overview iview and the UWL iview. ( i.e.We have added the UWL iview to the HCM process overview page).
Now, when we open this page from the area page, the HCM process overview iview is not getting displayed initially. But when we refresh the page, the HCM process overview gets displayed.
Is there a way we can ensure that both the iviews are displayed initially itself, without any refresh? Are there any settings for this?
TIA
Regards,
Diana

Development Component not visible in dev config, but visible in DTR,CBS

Hi,
we have recently migrated our production track from netweaver 2004 to 2004s. In the Dev Config perspective I am unable to see a DC, but I am able to see the same from the DTR perspective. I am also able to see this DC in CBS.
I am unable to create a project or work on this DC because of this problem.
Has anyone else faced the same problem ? What can be done to make the DC visible in the Dev Config ?
Thanks in advance for your help.
Warm regards,
Rashmi

Hi Dao,
Thanks again for your reply.
Here are the findings :
1)The DC is not available in both the active and inactive tabs in the Dev config perspetive.
2) I have only NWDS 7.0 on my machine, but Admin has the older version 6.4 and it was not visible on their machine.
3) I tried Re-Synching the archives, but still no luck, the DC is still invisible.
4)The DC was last modified during the creation of the new track, the activities making changes to the DC before that are mostly UI changes, no deletes etc.. which could cause the DC to not be visible.
5) It is a WD DC.
6) The DC exists in Cons/Dev (both active/inactive) DTR workspaces as well as CBS build spaces (on both versions of the track)
7)There are no pending activities for this DC in the old track.
8)There were couple of broken DCs on the new track but this is mainly because of compile time errors due to use of deprecated methods.
While checking for all these items I noticed that the .dcref file for the DC is missing in the DTR for both active and inactive, could this mean anything ? Is this the reason for the DC not being visible in the Dev Config perspective ?
Is there any way to recover the DC ?
Thanks in advance for your help.
Warm regards,
Rashmi

Full Screen is not visible

Hi Experts,
When i execute any web dynpro application(e.g Leave Approval) in browser(IE6), the screen is not visible fully that's why i can't click on submit button in order to approve the req.
work around for this issue is F11. by pressing F11 full screen comes up but I need permanent Solution. Kindly help me.
I appreciate any suggestions.
Regards
Manish

Hi Manish
Are you running the application directly from the wd or you have created the iview for that application?
If you have created an iview for your application, there might b the reason that you forgot to set the open page property as full page. If this is the case, do it.
If you are running your application from wd itself, and not able to see the complete view - try this
1. try to run in other IE versions. But, tell you something, 6 is the best to run all the applications.
2. check the component used by you in the application & there sizes. Sometimes, problem comes that you outerframe size is less as compared to inner. This will result in the same situation.
Just try this and tell me if something worked out for you. Thanks.
Best Regards
Chander Kararia
If your problem is solved, close the thread marking answered.

Dynamic WD Component iView not visible?

Similar Messages

Maybe you are looking for