Dynamic Web template not updating

I am using EW4 and have created a dynamic web template. Some of the pages of the site have all of the updates but some don't. I am not changing any of the layout, text or graphics it is just the links. When I preview the pages some of them show all
the links but some show none.
I am on a different computer than the one I created the new pages on.
I have tried to "save all pages"
I have saved the template pages.
I have searched this forum and hit the"recalculate links" button and also "maintain site using hidden meta file" button but it is still not updating.
Any ideas?
Thanks

My point was that in 99.999999% of the cases (approximately), the problem is user error (or a user-caused problem, such as non-standard workflow), but the first solution people go to is to blame the software and uninstall and re-install it.
And even if, in the very, very, very rare case that an installation is corrupt (when was the last time you had commercial software become corrupted?), simply uninstalling and reinstalling usually doesn't fix the problem, because corrupted files are
left on the hard drive during the uninstall process. They remain there and cause the same problems after reinstall that they caused initially. Without doing a thorough clearing of all old files and Registry entries, the new install is plagued by the same problems.
As Scott has noted, we have had exactly one documented report in this forum in all these years of a reinstall of EW fixing a problem.
Again--the overwhelming majority of problems are caused by people who do not know how to use the program properly and who should be looking inward for the solution rather than outward.
A horse walks into a bar. The bartender asks "Why the long face?" "Because I was born into servitude and when I die my hooves will be used to make glue." It was at this point that the bartender realized he would not be getting a tip.

Similar Messages

Using dynamic web template

Hello every body:
I'll design my web by ADW CS3 , I need using dwt extension, I
know how I can used it by frontpage but I don't know how I can
using it by DW, how I can attach dynamic web template,
Can any body help me?
Thank you.

Open DW. Press F1. Read about how to create and use
Templates.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"small digital" <[email protected]> wrote in
message
news:fvc2a7$nf0$[email protected]..
> Hello every body:
>
> I'll design my web by ADW CS3 , I need using dwt
extension, I know how I
> can
> used it by frontpage but I don't know how I can using it
by DW, how I can
> attach dynamic web template,
> Can any body help me?
> Thank you.
>

Dreamweaver CS6 Templates not updating pages since i copied the website to a new computer

Dreamweaver CS6 Templates not updating pages since i copied the website to a new computer
First i install CS6 on the new computer
copy the projects
import the websites
Now, when i change any template the pages do not update any more. New pages working correct. Also manuell updating works.
Any Idea?
Where are the info about the join template and the pages. Seems on the old computer - but where?
Thx

hm?
now I made a new page from the template on the new machine - and find one difference:
New Page:
<!doctype html>
<html lang="de">
<head>....
Old Page:
<!doctype html>
<html lang="de">
<head>...
The slash / after template=" is not there on the new machine. If i remove the slash on the copied pages and restart dreamweaver then it works. A lot of work, but i can solve my problem this way.
Maybe there is some checkbox for path handling...?

Template not updating html.

I now have about 50 total pages ready to upload to my host,
and have a huge problem. Seems that all the images, and links are
going to: file:///C|/Documents and Settings/ bla bla !! I did a
find and replace, on my templates but it does not update the html
in the pages themselves. And I cannot edit the editable area's via
code. Please tell me I don't have to start from scratch!? I have
already done so twice, and I'm afraid a third time is just out of
the question.

> file:///C|/Documents and Settings/ bla bla !!
This is pointing to your hard drive. Are you working in a
defined DW site?
Is the Template folder in the root of your site?
Nadia
Adobe� Community Expert : Dreamweaver
http://www.csstemplates.com.au
- CSS Templates | Free Templates
http://www.perrelink.com.au
- Web Dev
http://www.DreamweaverResources.com
- Dropdown Menu Templates|Tutorials
http://www.adobe.com/devnet/dreamweaver/css.html

Template not updating pages on save

I created a template, then created pages based on that template. I make a change to the template, save, it says it will update my 10 pages, then the log shows that 0 pages were updated. I check the pages, they didn't update. What's the problem? Why are my pages not updated?
Thanks,
KoffeeKat

Are you working with valid code?
Code Validation Tools
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
Do you have an editable region in your Template's <head> tags?
Can you post your Template code into a reply?
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Web template not capturing in Transport

Hi experts,
I am Saving as an existing web template and inserting my query in the new template. When I try to transport that Web Report, the new web template is not getting captured. What can be the problem?

Just included the template manually in the transport.

Remote file template not updating on website

Hello I am very very new to dreamweaver and have been handed a website that I have to maintain and make changes to.
The website uses a template called index with further nested templates as shown
The index template contains the code for the Menu Bar and footer and although I have been able to make other updates and changes I am finding that any changes to the code on this template do not show up on the site. The strange thing is that both the local and remote code has updated as I would like it is just the website itself that is not changing. When I view the website source code it is different to the remote file code. I assume that the link between the two is somehow broken but I do not know how to fix it. Is there a trick to fixing such a problem or am I wrong about this being the problem?
Here is the remote file code which is that same as the local code - I have out the code that is not updating in bold and underlined it:
<body>
<div class="container">
<div class="header">
    <div id="header_top">
      <div id="text_only"><a href="http://www.genesi-fp7.eu/betsie/parser.pl">Text-only</a> </div>
       <div id="admin"><a href="../admin/index.php">admin</a> </div>
      <div id="search"><a href="../webpages/search/search.html">search</a></div>
      <div id="header_middle">
        <div id="logo_left"><img src="../images/500px-Flag_of_Europe.svg.png" alt="European Union" width="167" height="111" border="0" /></div>
        <div id="logo_middle"><img src="../images/Genesi_Logo.png" alt="GENESI" width="620" height="111" border="0" /></div>
        <div id="logo_right"><a href="http://cordis.europa.eu/home_en.html"><img src="../images/fp7.png" alt="Seventh Framework Programme" width="154" height="111" border="0" /></a></div>
      </div>
      <div id="header_bottom">
        <ul id="MainMenu" class="MenuBarHorizontal">
          <li><a href="../index.html">home</a> </li>
          <li><a href="../webpages/news/news.php">news</a></li>
<li><a href="../webpages/programme/programme_wp1.html">programme</a></li>
<li><a href="../webpages/consortium/consortium_0.html">consortium</a></li>
<li><a href="../webpages/downloads/downloads.php">downloads</a></li>
<li><a href="../webpages/links/links.html">links</a></li>
          <li><a href="../webpages/contact/contact.html">Contact</a></li>
        </ul>
      </div>
    </div>
    </div>

<div class="mainSection">
    <h1>here is the main section </h1>
</div>

<div class="footer">
    <div id="footer_top">This project is co-financed by the <a href="http://ec.europa.eu/index_en.htm">European Commission</a> and made possible within the <a href="http://cordis.europa.eu/fp7/home_en.html">VII Framework Programme</a></div>
    <div id="footer_middle">Page maintained by <a href="mailto:[email protected]">Molly Buckingham</a> · Last update: 03-Apr-2013
    </div>
    <div id="footer_bottom">
      <div>© 2012 <a href="../webpages/consortium/consortium_1.html">G.EN.ESI Consortium</a> · <a href="../webpages/footer/Disclaimer.html">Disclaimer</a> · <a href="../webpages/footer/privacy_notice.html">Privacy Statement</a></div>
    </div>
    </div>
And here is the source code from the website - again the code is underlined and in bold


</head>
<body>
<div class="container">
<div class="header">
    <div id="header_top">
      <div id="text_only"><a href="http://www.genesi-fp7.eu/betsie/parser.pl">Text-only</a> </div>
       <div id="admin"><a href="../../admin/index.php">admin</a> </div>
      <div id="search"><a href="../search/search.html">search</a></div>
      <div id="header_middle">
        <div id="logo_left"><img src="../../images/500px-Flag_of_Europe.svg.png" alt="European Union" width="167" height="111" border="0" /></div>
        <div id="logo_middle"><img src="../../images/Genesi_Logo.png" alt="GENESI" width="620" height="111" border="0" /></div>
        <div id="logo_right"><a href="http://cordis.europa.eu/home_en.html"><img src="../../images/fp7.png" alt="Seventh Framework Programme" width="154" height="111" border="0" /></a></div>
      </div>
      <div id="header_bottom">
        <ul id="MainMenu" class="MenuBarHorizontal">
          <li><a href="../../index.html">home</a> </li>
          <li><a href="../news/news.php">news</a></li>
<li><a href="../programme/programme_wp1.html">programme</a></li>
<li><a href="consortium_1.html">consortium</a></li>
<li><a href="../downloads/downloads.php">downloads</a></li>
<li><a href="../links/links.html">links</a></li>
          <li><a href="../contact/contact.html">Contact</a></li>
        </ul>
      </div>
    </div>
    </div>
<div class="mainSection">
    <div class="SubMenuBar">
      <ul id="SubMenu" class="MenuBarVertical">
         <li><a href="consortium_1.html">Università Politecnica Delle Marche</a></li>
      <li><a href="consortium_2.html">Granta Design Ltd</a></li>
      <li><a href="consortium_3.html">Faber s.p.a.</a></li>
      <li><a href="consortium_4.html">Sibuet Environnement</a></li>
      <li><a href="consortium_5.html">Bonfiglioli Vectron Gmbh</a></li>
      <li><a href="consortium_6.html">ENEA</a></li>
      <li><a href="consortium_7.html">University of Bath</a></li>
      <li><a href="consortium_8.html">Grenoble Institute of Technology</a></li>
      </ul>
    </div>
    
    <div class="content">
      <h1><strong>The Università Politecnica delle Marche</strong></h1>
      <p><img src="../../images/delle_Marche.jpg" alt="The Università Politecnica delle Marche" width="142" height="142" />The Università Politecnica delle Marche(UNIVPM) is situated in the Marche Region (area of Ancona) that is the one of most important European industrial districts related to the household appliances, in fact many European leader companies such as Indesit , Elica, Ariston TG, Faber, and many others, have their headquarters there. Thanks to this geographical position UNIVPM has many collaborations with these companies and it has matured a vast skill on research topics related to the household appliances field. UNIVPM has 5 faculties, 550 professors (the largest is the Engineering Faculty with 180 professors), 12 technical Departments and 17,000 students; it participates to 23 academic spin-off. The central administration of UNIVPM has a management department which gives support to technical departments in European project set up, negotiation and administration of the grant agreement, draft and negotiation of the consortium agreement as well as project financial reporting. In this project will be involved the Department of Mechanics that has a remarkable experience on European Projects since it has been coordinator of 6th and 7th FP projects and it is involved in 9 active European projects. In particular, UNIVPM coordinates the G.EN.ESI project from an administrative and technical point of view.</p>
      <p>The scientific contact at the Università Politecnica delle Marche for the G.EN.ESI project is Prof. Michele Germani. </p>
    </div>
    </div>
      <script type="text/javascript">
var MenuBar2 = new Spry.Widget.MenuBar("SubMenu", {imgRight:"../SpryAssets/SpryMenuBarRightHover.gif"});
</script>
<div class="footer">
    <div id="footer_top">This project is co-financed by the <a href="http://ec.europa.eu/index_en.htm">European Commission</a> and made possible within the <a href="http://cordis.europa.eu/fp7/home_en.html">VII Framework Programme</a></div>
    <div id="footer_middle">Page maintained by <a href="mailto:[email protected]">Chunlei Li</a> · Last update: 25-Apr-2012
    </div>
    <div id="footer_bottom">
      <div>© 2012 <a href="consortium_1.html">G.EN.ESI Consortium</a> · <a href="../footer/Disclaimer.html">Disclaimer</a> · <a href="../footer/privacy_notice.html">Privacy Statement</a></div>
    </div>
    </div>
</div>
<script type="text/javascript">
var MenuBar1 = new Spry.Widget.MenuBar("MainMenu", {imgDown:"SpryAssets/SpryMenuBarDownHover.gif", imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
</script>
</body>
</html>
Thank you in advance for your help

Jon Fritz that did actually work for some of the pages but not others. I upadted each invidivual page, except the main page as I have not finished the content and now some of the pages are acting strangely.
Here is the website http://www.genesi-fp7.eu/index.html
As you can see every page except the 'Contacts' and 'Links' page is now reading the correct code when you click on the 'Consortium' tab. The strange thing however is that the footer has updated on the 'Links' page suggesting that this part of the template has updated. Both these pages are based on the Index-misc nested template. The code is copied here:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<link href="../styles/genesi.css" rel="stylesheet" type="text/css" />
<script src="../SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<link href="../SpryAssets/MainMenu.css" rel="stylesheet" type="text/css" />
<link href="../SpryAssets/SubMenu.css" rel="stylesheet" type="text/css" />
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<meta name="google-site-verification" content="3L2ZN1aLnNO1X__brL1UzpHsgkiL7NdjWT8oJnAxF64" />

<title>G.EN.ESI</title>






</head>
<body>
<div class="container">
<div class="header">
    <div id="header_top">
      <div id="text_only"><a href="http://www.genesi-fp7.eu/betsie/parser.pl">Text-only</a> </div>
       <div id="admin"><a href="../admin/index.php">admin</a> </div>
      <div id="search"><a href="../webpages/search/search.html">search</a></div>
      <div id="header_middle">
        <div id="logo_left"><img src="../images/500px-Flag_of_Europe.svg.png" alt="European Union" width="167" height="111" border="0" /></div>
        <div id="logo_middle"><img src="../images/Genesi_Logo.png" alt="GENESI" width="620" height="111" border="0" /></div>
        <div id="logo_right"><a href="http://cordis.europa.eu/home_en.html"><img src="../images/fp7.png" alt="Seventh Framework Programme" width="154" height="111" border="0" /></a></div>
      </div>
      <div id="header_bottom">
        <ul id="MainMenu" class="MenuBarHorizontal">
          <li><a href="../index.html">home</a> </li>
          <li><a href="../webpages/news/news.php">news</a></li>
<li><a href="../webpages/programme/programme_wp1.html">programme</a></li>
<li><a href="../webpages/consortium/consortium_0.html">consortium</a></li>
<li><a href="../webpages/downloads/downloads.php">downloads</a></li>
<li><a href="../webpages/links/links.html">links</a></li>
          <li><a href="../webpages/contact/contact.html">Contact</a></li>
        </ul>
      </div>
    </div>
    </div>

<div class="mainSection">
    <div class="SubMenuBar">
      <ul id="SubMenu" class="MenuBarVertical">
        <li><a href="#">MISC</a></li>
      </ul>
    </div>
    
    <div class="content">
      <h1>Introduction to the G.EN.ESI Project</h1>
      <p>The sustainability of industrial products, particularly household appliances, is an important issue today. Energy consumption in the residential/domestic sector is about 20% of world consumption, and associated greenhouse gas emissions exceed 35%.   Household appliances contribute greatly to these values and thus require particular attention as far as sustainability is concerned.</p>
      <p>It is well known that decisions taken during the early design of products are very important in determining total product cost. It is possible to hypothesize the same for environmental impacts – i.e. the sustainability of a product is largely determined during the early design stage. In order to allow designers to make well-informed decisions, new design methods and tools are needed to provide the basis for determining the degree of sustainability of a given product or process. Many eco-design procedures and tools have been developed but they are often far from a practical day-by-day application in company engineering departments, and they are not well integrated with computer-aided design tools.   This project wants to make up for this limitation and to develop an eco-design methodology (called G.EN.ESI) and a related software design tool (called the G.EN.ESI platform) able to help product designers in ecological design choices, without losing sight of cost and typical practicalities of industry. The software platform will propose a guided process towards eco-design among several design choices based on the different scenarios of product lifecycle. The proposed approach will be applied to the household appliance field but it can be easily extended to other mechatronic products.</p>
      <p>The project started in February 2012 and will continue until January 2015.</p>
    </div>
    </div>
      <script type="text/javascript">
var MenuBar2 = new Spry.Widget.MenuBar("SubMenu", {imgRight:"../SpryAssets/SpryMenuBarRightHover.gif"});
</script>

<div class="footer">
    <div id="footer_top">This project is co-financed by the <a href="http://ec.europa.eu/index_en.htm">European Commission</a> and made possible within the <a href="http://cordis.europa.eu/fp7/home_en.html">VII Framework Programme</a></div>
    <div id="footer_middle">Page maintained by <a href="mailto:[email protected]">Molly Buckingham</a> · Last update: 03-Apr-2013
    </div>
    <div id="footer_bottom">
      <div>© 2012 <a href="../webpages/consortium/consortium_1.html">G.EN.ESI Consortium</a> · <a href="../webpages/footer/Disclaimer.html">Disclaimer</a> · <a href="../webpages/footer/privacy_notice.html">Privacy Statement</a></div>
    </div>
    </div>
</div>
<script type="text/javascript">
var MenuBar1 = new Spry.Widget.MenuBar("MainMenu", {imgDown:"SpryAssets/SpryMenuBarDownHover.gif", imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
</script>
</body>
</html>
Murray do you suggest that I try and get rid of the nested templates or am I biting off more than I can chew after two days of self training?
Thank you

Template not updating child pages

Hi, here's a link to the conundrum:
http://theexperience-exchange.co.uk/stop.html
This page (as are a few others) is based on a template document (stored in a Templates folder in the site root).
I added an editable region in the form of a new div with some text etc. When I do a 'save' I get the update files dialogue box, but it doesn't update the child pages.
I did look on the forum for an answer, althought there are similar examples of this issue, they don't seem to have had any dircet help.
As ever, any ideas would be greatly appreciated.
I'm signing off for the night, catch up with you all in the morning.
Thanks in anticipation
RP

Let's start with the obvious things.
1. Are you sure you're editing the correct template.dwt file?
Your Stop.html page is referencing this one. internal_pages.dwt
2. After saving your template and updating the child pages, did you upload the child pages to your server?
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Templates not updating other documents

Help please. my site that has three templates - 1 main and two nested are not updating the children pages. what could possible cause this?

PLEASE - don't use nested templates! Why have you? They are and will be trouble for you.
Here are seven common mistakes that will result in changes not propagating from Template to child -
1. Rename the Templates folder
2. Move the Templates folder to some other folder level in the site other than root level
3. Move a template out of the Templates folder.
4. Make changes to an editable region of the Template (which will not propagate)
5. Assume that Template changes will be effected by just uploading the changed Template file to the server without also uploading the changed local files
6. Corrupt the site cache so that the link between Template and child page is broken
7. Improperly create your child pages by simply opening the Template, adding page specific content, and resaving the Template with an *.html extension rather that its *.dwt extension. (you can tell if this is the case by looking at the code on a child page - if you see anything like <!-- TemplateBeginEditable... then this is what you have done). If you *have done this*, then recreate the child pages (in DWCS3) using FILE | New > Page from Template, select the Template and click CREATE.
The 6th problem can be repaired by using SITE | Advanced > Recreate Site Cache, and the six others can be fixed by just not doing them. Have you done any of those?
Or, read this -
http://www.adobe.com/go/dd83ba8b

How to get the web templates not specific to any locale GetAvailableWebTemplates

Hi
I am using spweb.GetAvailableWebTemplates((uint)1033, true) to get all the available web templates. Since i use 1033, i get the en-US site like Teams Site(en-US). But i would like to get the templates with locale not specific to any.
like Teams site(All)
How to achieve this.

Hi,
The locale ID specified when a site definition is created which controls the default language used in the corresponding site template.
If there are no other site definitions created based on other languages, then we can pass the default locale ID(1033) to the
SPWeb.GetAvalableWebTemplates method, it will retrieve a collection of site templates which are created with locale ID 1033.
The OOTB Teams Site template is created based on the locale ID 1033, so we can use this ID to retrieve it.
Best regards
Patrick Liang
TechNet Community Support

Dreamweaver templates not updating on second installation

I have just purchased the new Dreamweaver CS5.5. I installed it on my laptop first and it is working fine. However the package is not working correctly on my husband's laptop. He is finding that the templates are not updating the files despite going through the process. I am the 'techie' in our partnership and I did make sure both installations were identical.
Updates we are trying to make are outside of the editable regions.
It has taken me years to get him to accept an update for this programme, and now it doesn't work for him, he is not well pleased at me spending hundreds of pounds, when the Dreamweaver MX2004 worked well for him.
Please can someone point me in the right direction to put this right.
Jean

We are not working on the same templates. In our partnership, I build the templates and then turn them over to my husband to input the content. The particular problem we are incurring at the moment is on a fully functioning website. We noticed that on changeover from Dreamweaver MX2004 to CS5.5, the css file wasn't being read, the difference being:
from <link type="text/css" media="all" rel="stylesheet" href="/styles/style.css" />
to <link type="text/css" media="all" rel="stylesheet" href="../styles/style.css" />
don't really understand this, but having updated the template, the dialogue box came up asking if you want to update all files connected to template, said ok, and the finish dialogue box says 211 files updated. But when you open the file it hasn't actually updated at all.
Website looks ok online now as he has went back to MX2004 to upload a new page.

Employee Search in Dynamic Navigation does not update other iViews (FPM)

Hi all,
after selecting a person from Employee Search (MSS) we have to display corresponding data in a customer specific iView with help of selected person number.
So I created a Floorplan Manager Application as described in https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/how-toaddacustomWebDynproiViewtotheMSSEmployeeProfile%28ECC+6.0%29&
If I use the SAP content page or create my own pages with corresponding Employee Search and customer specific iView, updating of data on the customer specific iView works. But if I add the Employee Search to Dynamic Navigation, the data is not updated in the customer specific iView.
I didn´t find a solution in this forum. Does anybody know, if it is possible to add the Employee Search as Dynamic Navigation (with help of Floorplan Manager functionality) and update data in other iViews and how this works? Or is it possible to handle this in a different way, e.g. PortalEventing?
Thanks,
Thomas

Hi,
I also tried to use only iViews of 'General Information' and added the employee search (team viewer) of the sap
content page 'General Information' to the dynamic navigation, but the other SAP standard iViews of 'General Information' page are not updated, too.
Does anybody know, if it is possible to add the employee search to dynamic navigation and to update the other iViews of 'General Information'? If yes, what properties have to be set? Are some settings for Floorplan Manager
needed?
Could anybody please give me a hint?
Thanks,
Thomas

Template Not Updating Files

I am helping someone with implementing CSS on a website. She
created the entire site in Dreamweaver MX using one dreamweaver
template. I did a remote get of all the files from her ftp site,
including the template file. So now I have the entire directory
structure on my local computer as is what is on the server.
I opened her template file and added a link to the style
sheet I created. However when I went to save the template file,
dreamweaver didn't ask me if I wanted to update the files that were
created previously with this same template. What could be causing
the template to not update all of the HTML files associated with
it? Is it because they weren't created on my local machine?
Please help a VERY FRUSTRATED guy :-)

This is the problem - look at the markup below. You say that
this is a child
page, yet the markup still uses -

> <title>Untitled Document</title>
> 
> <meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1">
>  
> <script language="JavaScript">
> <!--
> function mmLoadMenus() {
> if (window.mm_menu_0517194225_0) return;
> window.mm_menu_0517194225_0 = new
Menu("root",120,24,"Arial, Helvetica,
>
sans-serif",18,"#ffffff","#ffff00","#009933","#33cc33","center","middle",3,1,100
> 0,-5,7,true,true,true,0,false,false);
>
> mm_menu_0517194225_0.addMenuItem("Facts","window.open('
http://dipetanecanada.com
> /html/facts_about_dipetane.html', '_self');");
>
> mm_menu_0517194225_0.addMenuItem("Uses","window.open('
http://dipetanecanada.com/
> html/uses_of_dipetane.html', '_self');");
>
>
mm_menu_0517194225_0.addMenuItem("More Info","window.open('
http://dipetanec
> anada.com/html/links_to_more_info_on_dipetane.html',
'_self');");
>
> mm_menu_0517194225_0.addMenuItem("FAQ's","window.open('
http://dipetanecanada.com
> /html/frequently_ask_questions__faq_.html', '_self');");
> mm_menu_0517194225_0.hideOnMouseOut=true;
> mm_menu_0517194225_0.menuBorder=1;
> mm_menu_0517194225_0.menuLiteBgColor='#006600';
>

Files using template not updating after moving

On this site "C" (see link) site I want to move the Template&Library folder and get them inside the local root folder, which is actually "Os". When I move it in DW the links are updated nice - but when I change the template, the files using it are not updated. Anyone care to tell me how to move these two folders to Os folder and not experiencing this problem?
http://302.se/3839

You should never had a folder named "public_html" in a properly defined site.
And "Os" is not the root folder of the C site. You would need a NEW site definition with Os as the root for the Templates to work properly.

Template not updating meta tag info.

I use DW MX on PC w/XP Home OS -- in the event that this info
makes any difference.
I updated meta tag info in a template then applied it to all
the child pages. The changes were not propogated. I've looked over
the info at "Template child pages are not updated when parent
template is changed," from
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=dd83ba8b
I haven't done any of the boo-boos on the list other than to
recreate the cache file (#6) -- to no avail I might add...
Any suggestions?

> Out of curiosity how
do most SE's locate sites/info?
By using links from other sites, or domains that have been
submitted to
them. The former method is MUCH faster than the latter. If I
put a link to
a client site on my site, it's spidered in days/or a few
weeks at most.
> She's had several clients remark that the old title info
is displayed
> (from
> her previous, now-defunct site) when they save her
current site as a
> favorite.
> So she'd like the new info to be reflected,
understandably.
I'd have to see the site.
> I've also tried to update by making a wee change in the
template file and
> resaving, which also draws a blank. I've wracked my tiny
brain...
Here are seven common mistakes that will result in changes
not propagating
from Template to child -
1. Rename the Templates folder
2. Move the Templates folder to some other folder level in
the site other
than root level
3. Move a template out of the Templates folder.
4. Make changes to an editable region of the template (which
will not
propagate)
5. Assume that template changes can be uploaded to the server
without also
uploading the changed local files
6. Corrupt the site cache so that the link between template
and child page
is broken
7, Improperly create your child pages by simply opening the
template,
adding page specific content, and resaving the template with
an *.html
extension rather that its *.dwt extension. (you can tell if
this is the case
by looking at the code on a child page - if you see anything
like <!--
TemplateBeginEditable... then this is what you have done)
The 6th problem can be repaired by using SITE | Advanced >
Recreate Site
Cache, and the six others can be fixed by just not doing
them. Have you
done any of those?
Or, read this -
http://www.adobe.com/go/dd83ba8b
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Cricketgrrl" <[email protected]> wrote in
message
news:[email protected]...
>
quote:
Originally posted by:
Newsgroup User
> SE's ignore meta tag information, so there would be no
benefit to doing
> this.
>
> > The client's also paying a company for SE
optimization,
> > which requested the meta tags be updated/changed.
>
> Your client is being ripped off. This is a useless
change.
>
> Nevertheless, if the meta tags are in a non-editable
region of the
> template,
> changes to them in the template page will propagate to
all LOCAL files
> that
> are child pages of that template, which must then be
uploaded.
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
>
>
> I'll pass the SE comments on to my client. Out of
curiosity how
do
> most
> SE's locate sites/info? I realize this is complete study
of its own.
> Nonetheless, I'd like to be able to pass on some useful
info to my client.
>
> She's had several clients remark that the old title info
is displayed
> (from
> her previous, now-defunct site) when they save her
current site as a
> favorite.
> So she'd like the new info to be reflected,
understandably.
>
> I've tried numerous times to update the local pages via
Modify > Templates
> >
> Update pages... and after supposedly doing its thing,
the update log
> shows
> this info:
>
> Updating D:\CoachBenita\_web\
> Done.
> files examined: 11
> files updated: 0
> files which could not be updated: 0
> total time: (0:00:01)
>
> I've also tried to update by making a wee change in the
template file and
> resaving, which also draws a blank. I've wracked my tiny
brain...
>

Dynamic Web template not updating

Similar Messages

Maybe you are looking for