Dynamically adding a device to a non-global zone

How can you add a new device to a non-global zone without having
to reboot the zone ? Obviously using zonecfg and then rebooting the
zone works but often rebooting the zone would be very user unfriendly.
In particular we occasionally need to add a new disk mirror in the global
zone and then let the non-global zone have access to it.

So each zone has a /dev tree that's private in <zoneroot>/dev which gets lofs mounted to /dev in the zone. You can mknod a new device in here and it appears instantly in the zone. Use the same major and minor numbers that device has in the global zone. If it's a disk device, make sure to major both the block and character device.
Of course, you want to edit the zone config to make it permanent (though I suspect it may actually be permanent if you mknod the device...)

Similar Messages

Adding a cdrw to a non-global zone

Hi all,
I am attempting to add a cdrw on a laptop running Solaris 10 to a
non-global zone via the following (after browsing the archives of this
list as well as related forums and documentation):
"cdrw -l" when run in the global zone reports
"/dev/rdsk/c1t0d0s2" as the sole CD writer attached. I have previously
burnt cdr(s) using this, so the functionality of the drive is not an issue.
I then proceeded to configure a zone, "zulu01", and added a device via
the following using zonecfg (I have omitted the other configuration data
which is standard, root path, standard inherit-pkg-dir)
"add device"
"set match=/dev/rdsk/*"
"end"
"commit"
"verify"
I then installed the zone
"zoneadm -z zulu01 install"
zoneadm does the usual and reports success.
I boot the zone
"zoneadm -z zulu01 boot"
and login via "zlogin -C zulu01"
Inside zulu01, running "cdrw -l"
reports "No CD Writers found."
a "ls /dev/rdsk" shows that c1t0d0s2 is present.
I am aware that adding such a device is not recommended, but it is
supposedly possible?
Please advise on what I am doing wrong, or is it not possible to add a
cdrw to a non-local zone?
Thanks in advance.
Regards,
Jeremy.

This should work. A shot in the dark: can you try with another tool than cdrw, cdrecord for example? Also make sure that volume management is not running in the global zone (/etc/init.d/volmgt stop).
Blaise

Adding static arp entries in non-global zones

It doesn't seem to be working:
# arp -s 10.0.73.8 02:23:23:23:32:12 permanent
10.0.73.8: Not owner
Any privileges or devices I have to add to the non-global zone to get this working?
Thanks.

swiergot wrote:
It doesn't seem to be working:
# arp -s 10.0.73.8 02:23:23:23:32:12 permanent
10.0.73.8: Not owner
Any privileges or devices I have to add to the non-global zone to get this working?
Thanks.Unless you're running exclusive IP, the ARP table is under control of the global zone. Have you made the change in the global zone, to determine if it propogates or not? It should.
Best,

Unable to add a device (e.g. /dev/cua0) to a non-global zone

Hi,
I've installed solaris 10u4 on a x86 machine with the latest patches, installed with the smpatch utility
The history:
I've installed solaris 10u3 without any patches, a quite minimum installation; I 've created a non-global zone, added a zfs dataset, added networking, add one serial device (/dev/cua0); installed hylafax from blastwave in the created zone using the attached modem on /dev/cua0, all was working fine, except some sendmail issues. Due to issues with samba, which I needed on this machine, I've tried to update the machine, after ending up in dependency hell, due the minimum installation, I gave up. I did a fresh install of solaris 10u4 instead also with latest patches applied with the smpatch utility, the I've created a new zone and want to add the device /dev/cua0 like in the s10u3 installation, but the device doesn't appear in the non-global zone, so I've installed hylafax in the global-zone temporary.
The question, any ideas or workarrounds to bring the async device into a non-global zone again ?
I'm not a newbie in nix like systems (several years with BSD and GNU/Linux), but for solaris I would classify myself as a newbie ;-)
thanks in advance.

Hmm. If that didn't work, then it's possible you're running into a different problem.
But I checked again and this is the one I was thinking of. Toward the bottom, some patches are referenced. I suppose they won't hurt, but I'm worried you're seeing something related to the 'cua' device rather than the general problem of device creation.
http://www.opensolaris.org/jive/thread.jspa?messageID=171187
Darren

Add tape device to non-global zone

Hi,
I have a SCSI attached Ultrium tape device attached and configured against the global zone.
The /dev/rmt/0* definitions in the global zone are links to ../../devices/pci@2*
I need to be able to use this tape device from the non-global zones.
To enable this, I have done the following:
zonecfg -z <zone name>
add device
set match=/dev/rmt/0
end
verify
commit
exit
I repeated the above for /dev/rmt/0m and /dev/rmt/0mn
Then I restarted the zone with the command:
zoneadm -z <zone name> reboot
After the reboot, I can see the device when using "mt -f /dev/rmt/0 status", but whenever I try to write a SAP brbackup to the new (initialised and not write protected) tape within the drive I get the following error:
BR0278E Command output of 'LANG=C cd /oracle/<SID>/sapbackup && /usr/sap/<SID>/SYS/exe/run/brtools -f detach LANG=C cpio -iuvB .tape
sh: /dev/rmt/0mn: cannot open
BR0280I BRBACKUP time stamp: 2012-04-04 08.21.41
BR0279E Return code from 'LANG=C cd /oracle/<SID>/sapbackup && /usr/sap/<SID>/SYS/exe/run/brtools -f detach LANG=C cpio -iuvB .tape.
BR0359E Restore of /oracle/<SID>/sapbackup/.tape.hdr0 from /dev/rmt/0mn failed due to previous errors
Have I created the device incorrectly, or does anyone have any ideas what could be the reason the write fails?
Any help appreciated.
Edited by: user11329299 on 04-Apr-2012 01:09

Hi,
Just to bring you up to speed, I have now fixed the issue.
The resolution was all within the iniSID.sap file that the backup is using. I have changed a number of parameters within this file:
1.     tape_copy_cmd = dd (was cpio)
2.     rewind = "mt     -f $ rew; sleep 30" (was " mt -f $ rew")
3.     rewind_offline = "mt -f $ offline; sleep 30" (was "mt -f $ offline")
4.     tape_pos_cmd = "mt -f $ fsf $: sleep 30" (was "mt -f $ fsf $")
5.     tape_size = 500G (was 18000M)
After making those changes, the backup started from within DB13. I believe that the main culprit was the tape_copy_cmd, but the others were changed to allow the tape drive time to become online again after any query.

Add device cdrom non global zone

Hi All ,
how to add device cdrom to non global zone ?
many thanks

Hi David,
Does your judgement that "you can definitely use a lofs mount to make /usr/local available inside the four zones" hold when /usr/local is an NFS mount in the global zone? James indicated that his /usr/local was an NFS mount, but I don't know if you targeted that specifically, or if you were just responding to the general case.
I have not had any success in performing lofs mounts of NFS mounts and making them visible in a local zone. I don't have any problems making a lofs mount of a NFS mount work in the global zone, I just can't NFS mount anything in the global zone and make it accessible in a local zone.
See http://www.opensolaris.org/jive/thread.jspa?threadID=2181&tstart=0 for a full description of what I tried and what happened. The short result is that when I try, accessing that directory in the local zone gives "I/O error" for file operations and "Not owner" for df.
Thanks,
Dab

Format disks in a non-global zone

Hi
Can i format a disk inside a non global zone which has been assigned (add device) to this non-global zone.
thanks

In order to allow managing his/her disk to the zone "administrator".
This is what i�ve got when i try to format the disk in the non-global zone:
AVAILABLE DISK SELECTIONS:
0. c4t600A0B8000179A5000002EFD42AFC76Fd0 <SUN-CSM100_R_FC-0610 cyl 20478 alt 2 hd 64 sec 64> sx2_v2
ssd22 at scsi_vhci0 slave 0
1. c4t600A0B8000179A5000002F0A4355CEE9d0 <SUN-CSM100_R_FC-0610 cyl 20478 alt 2 hd 64 sec 64>
ssd24 at scsi_vhci0 slave 0
Specify disk (enter its number): 1
selecting c4t600A0B8000179A5000002F0A4355CEE9d0
[disk unformatted]
FORMAT MENU:
disk - select a disk
type - select (define) a disk type
partition - select (define) a partition table
current - describe the current disk
format - format and analyze the disk
repair - repair a defective sector
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
save - save new disk/partition definitions
inquiry - show vendor, product and revision
volname - set 8-character volume name
!<cmd> - execute <cmd>, then return
quit
format> format
Ready to format. Formatting cannot be interrupted.
Continue? yes
Beginning format. The current time is Thu Nov 10 12:59:50 2005
Inquiry failed
failed
Warning: Unable to get capacity. Cannot check geometry
Warning: error reading backup label.
Warning: error reading backup label.
Warning: error reading backup label.
Warning: error reading backup label.
Warning: error reading backup label.

Problem with exporting devices to non-global zone

Hi,
I've problem with exporting devices to my solaris zones (i try do add support to mount /dev/lofi/* in my non-global zone).
A create cfg for my zone.
Here it is:
$ zonecfg -z sapdev info
zonename: sapdev
zonepath: /export/home/zones/sapdev
brand: native
autoboot: true
bootargs:
pool:
limitpriv: default,sys_time
scheduling-class:
ip-type: shared
fs:
dir: /sap
special: /dev/dsk/c1t44d0s0
raw: /dev/rdsk/c1t44d0s0
type: ufs
options: []
net:
address: 194.29.128.45
physical: ce0
device
match: /dev/lofi/1
device
match: /dev/rlofi/1
device
match: /dev/lofi/2
device
match: /dev/rlofi/2
attr:
name: comment
type: string
value: "This is SAP developement zone"
global# lofiadm
Block Device File
/dev/lofi/1 /root/SAP_DB2_9_LUW.iso
/dev/lofi/2 /usr/tmp/fsfile
I reboot the non-global zone, even reboot global-zone, and after that, in sapdev zone, there is no /dev/*lofi/* files.
What i do wrong? Maybe I reduce my sol 10 u4 sparc instalation too much.
Can anybody help me?
Thanks for help,
Marek

I experienced the same problem on my system Sol 10 08/07.
Normally, when the zone enters the READY state during boot, it's zoneadmd will run devfsadm -z <zone>. In my understanding this is to create the necessary device files in ZONEPATH/dev.
This worked well until recently. Now only the directories are still created.
It seems as if devfsadm -z is broken. Somebody should issue a call to sun.
As a workaround you can easily copy the device files into the zone. It is important not to copy the symbolic link but the target.
# cp /dev/lofi/1 ZONEPATH/dev/lofi
Hope this helps,
Konstantin Gremliza

Adding remote printer to non-global zone

I have a non-global zone with a remote printer defined, and lpstat shows
# lpstat -lp abcdef
printer abcdef disabled since Thu Jun 06 13:18:43 2013. available.
Remote Name: abcdef
Remote Server: 192.168.x.x
On another non-global zone I want to print to the same printer. I referred to the Solaris Printing SAG, and I thought all I had to do is
lpadmin -p abcdef -s abcdefserver
but lpstat -lp abcdef gives
Failed to get printer info for abcdef: not-found
The zone is
SunOS myzone 5.10 Generic_142909-17 sun4u sparc SUNW,Sun-Fire-V490
and the destination (abcdefserver) is a Windows server with the LPD service installed.
What else do I have to do? I can ping and telnet abcdefserver:515, so the network part seems to be fine.

Please follow the procedure that you can find there : http://docs.oracle.com/cd/E19082-01/819-7761/ertsp/index.html

Lucreate not working with ZFS and non-global zones

I replied to this thread: Re: lucreate and non-global zones as to not duplicate content, but for some reason it was locked. So I'll post here... I'm experiencing the exact same issue on my system. Below is the lucreate and zfs list output.
# lucreate -n patch20130408
Creating Live Upgrade boot environment...
Analyzing system configuration.
No name for current boot environment.
INFORMATION: The current boot environment is not named - assigning name <s10s_u10wos_17b>.
Current boot environment is named <s10s_u10wos_17b>.
Creating initial configuration for primary boot environment <s10s_u10wos_17b>.
INFORMATION: No BEs are configured on this system.
The device </dev/dsk/c1t0d0s0> is not a root device for any boot environment; cannot get BE ID.
PBE configuration successful: PBE name <s10s_u10wos_17b> PBE Boot Device </dev/dsk/c1t0d0s0>.
Updating boot environment description database on all BEs.
Updating system configuration files.
Creating configuration for boot environment <patch20130408>.
Source boot environment is <s10s_u10wos_17b>.
Creating file systems on boot environment <patch20130408>.
Populating file systems on boot environment <patch20130408>.
Temporarily mounting zones in PBE <s10s_u10wos_17b>.
Analyzing zones.
WARNING: Directory </zones/APP> zone <global> lies on a filesystem shared between BEs, remapping path to </zones/APP-patch20130408>.
WARNING: Device <tank/zones/APP> is shared between BEs, remapping to <tank/zones/APP-patch20130408>.
WARNING: Directory </zones/DB> zone <global> lies on a filesystem shared between BEs, remapping path to </zones/DB-patch20130408>.
WARNING: Device <tank/zones/DB> is shared between BEs, remapping to <tank/zones/DB-patch20130408>.
Duplicating ZFS datasets from PBE to ABE.
Creating snapshot for <rpool/ROOT/s10s_u10wos_17b> on <rpool/ROOT/s10s_u10wos_17b@patch20130408>.
Creating clone for <rpool/ROOT/s10s_u10wos_17b@patch20130408> on <rpool/ROOT/patch20130408>.
Creating snapshot for <rpool/ROOT/s10s_u10wos_17b/var> on <rpool/ROOT/s10s_u10wos_17b/var@patch20130408>.
Creating clone for <rpool/ROOT/s10s_u10wos_17b/var@patch20130408> on <rpool/ROOT/patch20130408/var>.
Creating snapshot for <tank/zones/DB> on <tank/zones/DB@patch20130408>.
Creating clone for <tank/zones/DB@patch20130408> on <tank/zones/DB-patch20130408>.
Creating snapshot for <tank/zones/APP> on <tank/zones/APP@patch20130408>.
Creating clone for <tank/zones/APP@patch20130408> on <tank/zones/APP-patch20130408>.
Mounting ABE <patch20130408>.
Generating file list.
Finalizing ABE.
Fixing zonepaths in ABE.
Unmounting ABE <patch20130408>.
Fixing properties on ZFS datasets in ABE.
Reverting state of zones in PBE <s10s_u10wos_17b>.
Making boot environment <patch20130408> bootable.
Population of boot environment <patch20130408> successful.
Creation of boot environment <patch20130408> successful.
# zfs list
NAME USED AVAIL REFER MOUNTPOINT
rpool 16.6G 257G 106K /rpool
rpool/ROOT 4.47G 257G 31K legacy
rpool/ROOT/s10s_u10wos_17b 4.34G 257G 4.23G /
rpool/ROOT/s10s_u10wos_17b@patch20130408 3.12M - 4.23G -
rpool/ROOT/s10s_u10wos_17b/var 113M 257G 112M /var
rpool/ROOT/s10s_u10wos_17b/var@patch20130408 864K - 110M -
rpool/ROOT/patch20130408 134M 257G 4.22G /.alt.patch20130408
rpool/ROOT/patch20130408/var 26.0M 257G 118M /.alt.patch20130408/var
rpool/dump 1.55G 257G 1.50G -
rpool/export 63K 257G 32K /export
rpool/export/home 31K 257G 31K /export/home
rpool/h 2.27G 257G 2.27G /h
rpool/security1 28.4M 257G 28.4M /security1
rpool/swap 8.25G 257G 8.00G -
tank 12.9G 261G 31K /tank
tank/swap 8.25G 261G 8.00G -
tank/zones 4.69G 261G 36K /zones
tank/zones/DB 1.30G 261G 1.30G /zones/DB
tank/zones/DB@patch20130408 1.75M - 1.30G -
tank/zones/DB-patch20130408 22.3M 261G 1.30G /.alt.patch20130408/zones/DB-patch20130408
tank/zones/APP 3.34G 261G 3.34G /zones/APP
tank/zones/APP@patch20130408 2.39M - 3.34G -
tank/zones/APP-patch20130408 27.3M 261G 3.33G /.alt.patch20130408/zones/APP-patch20130408

I replied to this thread: Re: lucreate and non-global zones as to not duplicate content, but for some reason it was locked. So I'll post here...The thread was locked because you were not replying to it.
You were hijacking that other person's discussion from 2012 to ask your own new post.
You have now properly asked your question and people can pay attention to you and not confuse you with that other person.

Ssh takes me to the global zone instead of the non-global zone

I have set up my first Solaris 10 server with a new zone. The ce device is set up on the zone as well as the global zone.
Output from ifconfig on the global zone:
# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
ce0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 172.16.1.217 netmask ffffff00 broadcast 172.16.1.255
ether 0:3:ba:f2:a1:54
ce1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
inet 172.16.1.199 netmask ffffff00 broadcast 172.16.1.255
ether 0:3:ba:f2:a1:54
Output from the non-global zone:
# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
ce1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 172.16.1.199 netmask ffff0000 broadcast 172.16.255.255
ether 0:3:ba:f2:a1:54
When I ssh into the non-global zone, I end up in the global zone? Can I ssh straight into the non-global zone? Am I missing something in the zone setup that keeps me from being able to ssh into the non-global zone?
Any help is appreciated. I have been racking my brain on this for several hours.
Thanks ahead of time.

TAdriver wrote:
The one thing I have found in the documentation is that if you set the network as an exclusive IP, you can only assign the physical name using zonecfg. You can't set the IP address or the default router. In fact, if you try to set either of those, you get an error saying you can't set those using an exclusive IP type.Correct. When doing a shared-IP zone, the zone has no privileges to do IP-level things. So the global zone (via the zone configuration) creates the virtual interface and sets the IP address. Then when the zone is booted, the interface is given to it.
With an exclusive-IP zone, the zone can do all this work itself. From its perspective, it's handed an interface like a regular machine. So the IP settings are done within the zone (/etc/hosts, /etc/hostname.XXX, /etc/netmasks).
Darren

*Missing utilities in Solaris11 Non global zone.*

Hi,
I created Non Global zone in Solaris 11, I found many utilities are missing in Non Global zone machine. For example in non global zone /usr/xpg4/bin contains only 2 utilities where as in global zone I have 68utilities. I copied few utilities from my global zone machine which ever is required for me(ex: id,grep,egrep....). I need to enable rlogin, telnet, ftp in my Solaris 11 non global zone machine. I installed pkg:/service/network/legacy-remote-utilities. But no luck. In some thread i found workaround to enable rlogin.
rlogin on zones in solaris 11 i found a workaround.
Need to copy 2 binaries and 2 .xml manifest from GZ to NGZ
cp /usr/sbin/in.rlogind
cp /lib/svc/manifest/network/login.xml
cp /usr/sbin/in.rshd
cp /lib/svc/manifest/network/shell.xml
Question1: how about other services?
Question2: As a concept It has to have all the utilities which is available in Global zone. Why these many utilities are missing? Am I doing any thing wrong or is it zone limitation? we are facing issue in only Solaris 11. where as in Solaris10 every thing works fine.

What you observed is normal. The basic Solaris 11 zone install gives you a somewhat minimal install. If you want additional packages, you can install them. If you want the zone install to have what you would install from a CD I suppose you could do a the following:
pkg install slim_install
pkg uninstall slim_install
My understanding is that the slim_install package contains dependencies which loads all of the desktop software but doesn't contain any content itself - which is why you can (and should) remove it afterwards.
That said, normally one uses a zone for a particular purpose. A better approach might be to install only the software in the zone which is needed for that purpose. That would save space, limit security exposure and reduce maintenance overhead. If your purpose is to have a full user environment, that may be to include all the slim_install packages and maybe others as well.
I would recommend that you not install services by copying files. If you need a service find out what package contains that service and install the package in the zone. That way you won't break maintenance via pkg update.
So - your questions:
1. A Solaris 11 zone install is minimal, presumably to make it easy to set up simple single function zones. Additional packages can be added as needed using "pkg install" as needed to provide any necessary services.
2. Solaris 10 zones work differently and import most packages from the global zone. With Solaris 10 sparse zones, you actually use the same files from the global zone. Solaris 11 zones are different in that they are actually a separate install. The basic install is minimal, presumably to allow for small and simple single function zones. You are not doing anything wrong with respect to the basic install, this is just how things work.

SFTP chroot from non-global zone to zfs pool

Hi,
I am unable to create an SFTP chroot inside a zone to a shared folder on the global zone.
Inside the global zone:
I have created a zfs pool (rpool/data) and then mounted it to /data.
I then created some shared folders: /data/sftp/ipl/import and /data/sftp/ipl/export
I then created a non-global zone and added a file system that loops back to /data.
Inside the zone:
I then did the ususal stuff to create a chroot sftp user, similar to: http://nixinfra.blogspot.com.au/2012/12/openssh-chroot-sftp-setup-in-linux.html
I modifed the /etc/ssh/sshd_config file and hard wired the ChrootDirectory to /data/sftp/ipl.
When I attempt to sftp into the zone an error message is displayed in the zone -> fatal: bad ownership or modes for chroot directory /data/
Multiple web sites warn that folder ownership and access privileges is important. However, issuing chown -R root:iplgroup /data made no difference. Perhaps it is something todo with the fact the folders were created in the global zone?
If I create a simple shared folder inside the zone it works, e.g. /data3/ftp/ipl......ChrootDirectory => /data3/ftp/ipl
If I use the users home directory it works. eg /export/home/sftpuser......ChrootDirectory => %h
FYI. The reason for having a ZFS shared folder is to allow separate SFTP and FTP zones and a common/shared data repository for FTP and SFTP exchanges with remote systems. e.g. One remote client pushes data to the FTP server. A second remote client pulls the data via SFTP. Having separate zones increases security?
Any help would be appreciated to solve this issue.
Regards John

sanjaykumarfromsymantec wrote:
Hi,
I want to do IPC between inter-zones ( commnication between processes running two different zones). So what are the different techniques can be used. I am not interested in TCP/IP ( AF_INET) sockets.Zones are designed to prevent most visibility between non-global zones and other zones. So network communication (like you might use between two physical machines) are the most common method.
You could mount a global zone filesystem into multiple non-global zones (via lofs) and have your programs push data there. But you'll probably have to poll for updates. I'm not certain that's easier or better than network communication.
Darren

Non-global zone network configuration

Hi,
Zones are a new thing for me so please excuse me if this is a basic query... I have recently jumpstarted a system using a jumpstart script that was developed by somebody else. It creates two non-global zones and configures their network interfaces.
I have unplumbed one of the virtual interfaces for a particular zone because the IP address it was using is actually being used by another system on the network. However, when I reboot the zone, the interface is re-assigned the same IP address again. The IP address in question is not in /etc/hosts on any of the zones, and in the non-global zones the "hostname.<interface>" files do not exist at all. Also, the IP address is not in sysidcfg in any of the zones.
So basically, interface e1000g0:2 is being assigned an IP address that was configured by the jumpstart script, so perhaps the jumpstart script has placed that IP address in some file that is read when the zone is booting. I have even checked rc scripts just in case but I cannot find the IP address anywhere. Would anybody please be able to tell me where the configuration information could be coming from in this scenario (nsswitch.conf specifies only files).
Thank you in advance...

its in the zone config.
zonecfg -z <zone in question> info
it should list a net address and physical device. you can then use:
zonecfg -z <zone in question>
from here you can remove the net statements, or change the address if you want to keep using the net card in your zone.

Non-Global Zone Routing

I have a V20z running a global zone on an IANA private network of 172.30.0.x and nic bge0
I also have a non-global zone on a public IP of 207.246.20.169 and nic bge1.
I am unable to ping from one zone to the next via a gateway. Normally the global zone would use a standard gateway for that network and my public network would also use a standard gateway for that network.
What appears to be happening is that despite what is in my /etc/defaultrouter the zone itself is the gateway.
For example, to ping something from either zone which would require the gateway results in:
ICMP Host Unreachable from gateway 'zone name' (zone ip address)
What I want to happen is that the global zone honors the gateway that is normally used in this network and the non-global zone uses/honors the gateway that is normally used in that network.
It doesn't seem to matter if I have the normal internal gateway in my /etc/defaultrouter or if I have the normal public gateway in /etc/defaultrouter or if I have both in /etc/defaultrouter (all in the global zone of course).
Do I need to use routed to achieve this? Am I missing something here?

I hammered the problem out by adding a static route in the global zone:
route add 172.30.0.0 207.246.20.161
Where 207.246.20.161 is my gateway on the public side.
I slapped this into an /etc/init.d script in the global zone and ran it from /etc/rc2.d like the article below suggests:
http://www.sun.com/bigadmin/content/submitted/persistent_routing.html

Dynamically adding a device to a non-global zone

Similar Messages

Maybe you are looking for