Dynamically enabling/disabling results using RunState.Execution

We run with our station options set to have results disabled for all sequences. BUT, at one point in a sequence run from the tools menu (i.e., not using the process model), we want to temporarily turn on results recording, run a step or two to record results, and then turn result recording back off.
I am calling an ActiveX/Com step to enable results using RunState.Execution DisableResults(false). I then run various steps that should be recording results, but my Locals.ResultList remains empty. Have also tried to calling RunState.Execution AddExtraResult, but no luck.
My true goal is to be able to call the TestReport sequence of the SequentialModel.seq file which takes as its first parameter the "results container". I want to be able to send a very select, small set of results that are generated from my sequence run from the tools menu. I tried various ways of creating a "dummy" result list, but was unsuccessful doing that as well.
Any ideas?

Barry,
For RunState.Execution DisableResults to work, The Engine and | or Sequence must also be False depending on what setting you have set to disable.
So in your case you need to set IEngine.DisableResults(False). You dont really need to call RunState.Execution DisableResults(False), use this if you what to switch on | off recording of selective steps rather than all steps in a Sequence.
Use Sequence.DisableResults to disable all steps in a Sequence.
Hope this helps
Regards
Ray Farmer
Regards
Ray Farmer

Similar Messages

[ADF UIX] Dynamically enabling/disabling fields

Hi
Another newbie question.
Does anybody have any pointers on how to dynamically set the read-only property of a messageInputText field dependent on the value of another field in an ADF UIX input-only-form?
To set the scene: I have a VO with the following columns:
1) id
2) subtype (values L or N)
3) field1 (only editable when subtype = L)
4) field2 (only editable when subtype = N)
When the user creates a new record, the subtype will default to L. I need field1 to be enabled and field2 to be disabled. If the user changes the subtype field to N, field1 must be disabled and field2 enabled.
Is this possible? Or is this best left to the spanking new ADF Faces?
(My environment: JDeveloper 9.0.5.2 build 1618)
Thanks!
CM.

Some research reveals one method to do this: EL (Expression Language).
As an example I had the following messageLovInput that I wanted to dynamically make read-only (similar to enabling/disabling) dependent on a value in another field 'InputRequiredInd'. As such the following tag was implemented:
<messageLovInput
model="${bindings.DsvId}"
id="${bindings.DsvId.path}"
destination="dataSetValidationRulesLevelOneLov.uix"
partialRenderMode="multiple"
partialTargets="_uixState"
readOnly="${!empty bindings.InputRequiredInd.inputValue ? false : true}"/>
You'll note in the readOnly element an "EL" expression. Essentially this says if the InputRequiredInd is not empty then return false otherwise true.
A useful reference:
http://www-106.ibm.com/developerworks/java/library/j-jstl0211.html
I hope this is helpful to someone!
Cheers,
CM.

Jython or wlst script to enable/disable result set cache at BusinessService

Hi,
I am new to creating Jython or wlst script. Can anybody help me out and send me the wlst script to enable/disable businsess service cache in OSB. The script should be called by Proxy Service.
Thanks

You cannot change the role name. If you want to use the same account activation scheme as used by the console and the perl script command lines, you must use the exact same names for roles, etc.
If you don't care about using the console or the command lines to manage roles, you can use any scheme you like, but you cannot mix and match the two schemes.

How to enable disable result status of callable object in Guided Procedures

hi,
Currently we are using guided procedures to handle Life Event changes in ESS. Each process has sequential block with Respective actions and callable object assigned to each action.
Most of the callable objects we are using are either standard Java Webdynpro screens that came with ESS business package or custom ABAP Webdynpro's. When we created callable objects with these web dynpro's there is tab that sets result status like "Complete", "Exit" etc.
The issue we are currently facing with result status is, there is no way that control is passed to result status enabled for specific step of guided procedure from the callable object. For example we created callable object for Benefits enrollment screen with result status "Complete". When user initiated guided procedure to make changes to Benefits enrollment, make changes to plans and click save. Once User click Save we want to send control to result status to get enable, till then we don't want the "Complete" button to be enabled on the Guided procedure step.
Is there way to control the result status button based on the action performed by user in respective screen/step of Guided Procedure?
Could someone suggest is there better replacement for guided procedures where I can use some other framework/process to achieve better functionality than GP's.
Thanks
Ravi.

migrate to BPM

ADF Faces: Dynamically enabling / disabling client validation

Hi Frank,
Im using JDeveloper 11.1.1.2.0 version. I want to disable the client side validation for some condition. I have read related information from Frank blog .
But In that frank used adf-faces-config.xml file for the following configuration.
<adf-faces-config xmlns="http://xmlns.oracle.com/adf/view/faces/config">
<skin-family>oracle</skin-family>
<client-validation-disabled>true</client-validation-disabled>
</adf-faces-config>
But in my application, I could not find adf-faces-config.xml file. I dont know where to configure please provide me the information.
Regards,
Felix

Hi,
in JDeveloper 11g this no longer is an option. To disable client validation you set immediate=true on the UI component, which youalso can do dynamically. Howerver, ensure you refresh the component after changing the immediate property state.
Frank

Make MultiValue Parameter Dynamically Enable/ Disable

Hi,
I have two MultiValue parameters in SSRS report. Both the parameters are independant of each other. If I choose value from first parameter, Second parameter should be disabled dynamically. If I choose value from second parameter, First
parameter should be disabled dynamically.
Can this be achieved in SSRS ?
Is there a workaround to achieve the above scenario ?
Regards
G. R. Venkatesh

Using nulls is one way. Another way is to set a default value say NotApplicable. Just set below expression for default value
IIF(Len(Parameters!SecondParameter.Value) > 0,"NotApplicable",Nothing)
Similarly for the other parameter
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs
Hi Visakh,
I am new to SSRS.
Could you please share a workaround sample for my scenario
I tried to implement the expression for Multivalue parameter1 default value, The parameter1 has below expression
=IIF(Len(Parameters!SecondParameter.Value) > 0,"NotApplicable",Nothing)
and Parameter2 has below expression
=IIF(Len(Parameters!FirstParameter.Value) > 0,"NotApplicable",Nothing)
I get a error saying "The expression references the parameter 'parameter2' which doesn not exist in the parameters collection. Letters in the names of parameters must use correct case"

Dynamic enable/disable

Hi
in my application i have tabular form with report 5 columns
p1,p2,p3,p4,p5
and a button "add row" when I click on add row button
all 5 columns should be enabled but once i submit and add the row in the table
p1,p2 and p3 should be disabled or locked not updatable,.
i should able to update only p4 and p5 columns
i checked the forum but could not get any matching my requirement.
can any one please help me how to do this.
thanks very much in advance.

Hi
in my application i have tabular form with report 5 columns
p1,p2,p3,p4,p5
and a button "add row" when I click on add row button
all 5 columns should be enabled but once i submit and add the row in the table
p1,p2 and p3 should be disabled or locked not updatable,.
i should able to update only p4 and p5 columns
i checked the forum but could not get any matching my requirement.
can any one please help me how to do this.
thanks very much in advance.

Dynamically enabling/disabling opc-binding to shared variables?

Hi.
I've got some shared variables binded to my OPC server, but sometimes some variables need to "ignore" the OPC updates and and be simulated, and in some cases, all of the variables.
So, I've got an application to dynamically change the shared variables properties: Network.UseBinding and Network.URL to "connect to" or "disconnect from" the OPC server, but is there a way to "unbind" the whole library from the OPC quickly and restore it back when need it?
I tried creating and deleting the IO server programatically but the variables go "bad"...
Is this is a good practice or should I change the method?

Hi Keptat, you can bind them directly to the OPC sever but you need to add
psp: at the begining.
For example
   psp:\\localhost\IOServer\ModbusSlave1.000001
   psp:\\aebenjamin\IOServer\OPC1.Channel_0_User_Defined.Ramp.
   psp:\\ host \ library\IOservername.register
An easy way to find the complete address y bind a Variable with psp
binding to the OPC server and you will get the path.
In the example code it gets the psp address from a Library, but won't get
you the directions of the registers inside the IOserver, so you need this list
manually.
Another option is create 2 libraries one with the variables binded to the IO
Server and the other binded to the simulated info, in this case you just have
to point to the library, and get the address of all variables.
Also you have to make sure the OPC server is deploy and you can see it
in the Distributed System Manager
Best Regards
Benjamin C
Senior Systems Engineer // CLA // CLED // CTD

Using XMLLIST - Enable/Disable Menu Items

I am using XMLList for creating menu items.
I want to enable / disable menu items based on the permissions to the user.
Below is the code snippet:
<fx:XMLList id="newData">
                              <menuitem id="item1" label="{resourceManager.getString('taskmgmt', 'taskmgmt.label.newProject')}" />
                              <menuitem id="item2" label="{resourceManager.getString('taskmgmt', 'taskmgmt.label.projectFromTemplate')}" enabled="false"/>
                    </fx:XMLList>
private function ItemClickHandler(event:MenuEvent):void
     if(PermissionManager.isAddPermitted("WTM_PROJECT_PLANNING")){
                                                       ProjectAssignmentModel.projectAssignmentFlag=false;
                                                       if(event.item.@label == resourceManager.getString('taskmgmt', 'taskmgmt.label.newProject')){
                                                                 clearModel();
                                                                 dispatchEvent(new SwitchViewEvent(SwitchViewEvent.SWITCH_VIEW_EVENT,false));
protected function newMenuButton_clickHandler(event:MouseEvent):void
                                        if(! PermissionManager.isAddPermitted("WTM_PROJECT_PLANNING")){
                                                  newData.item1.enabled = false;
                                        else
                                                  menuList.dataProvider = newData;
                                                  menuList.show(event.stageX + 5 , event.stageY + 5);
                                                  mode = CREATE;
Based on the permission, I want to dynamically enable / disable the "New Project" button.
Can someone provide information how to achieve this ?
Further update on this, it is giving the following error while running of the application:
"TypeError: Error #1089: assignment to list with more than one item is not supported"

Resolved by using the correct Data Provider and iterating through the list

Enable/disable textbox depending on list option, list is dependent on Radio

Hi,
I'm trying to enable/disable text_box which is dependent on select_list option, select_list is dependent on radio_button.
I'm able to enable/disable select_list using radio_button options, but I'm unable to handle text box which is again dependent on this SELECT_LIST item.
under html header page:-
<script type="text/javascript">
function disableOnValue(o)
if (o.value == 'Y')
document.getElementById('P86_Select_list_item').disabled = false;
else
document.getElementById('P86_Select_list_item').disabled = true;
document.getElementById('P86_text_box_item').disabled = true;
</script>
<script type="text/javascript">
$(document).ready(function()
$('#P86_Select_list_item').change(function()
if($(this).val() == 'Other')
$('#P86_text_box_item').attr("disabled", false);
else
$('#P86_text_box_item').attr("disabled", true);
</script>
under Region_Source of the region, whose Display point :- <b>Before Footer</b>
<script type="text/javascript">
if(document.getElementById('P86_radio_button_0').checked == true)
{disableOnValue(document.getElementById('P86_radio_button_0'));}
else
{disableOnValue(document.getElementById('P86_radio_button_1'));}
</script>
and under Radio_button item, HTML Form Element Attributes :- <b>onchange="javascript:disableOnValue(this);"</b>
also same way under text_box item , HTML Form Element Attributes :- <b>disabled</b>
any help
Deep

Thanks for replying Ben,
I have kept an example into apex workspace
workspace:- DEEPAPEX
username:- [email protected]
password:- walubu
application "Javascript" page 1
I'm able to enable/disable Select_list item & Text_box item with the help of Radio_button item(depending on user select yes or no option of the radio button)
But after selecting Yes option of the radio_button, only when user select "Other" option of the Select_List item the Text_box should be enabled otherwise it should be disabled for any of the options of the Select_list item.
I hope you understand my point.
Deep

Does anyone know how to enable/disable a dropdown menu in Forms at runtime?

Is there a way how to disable/enable dropdown menu for menus that have multiple sub levels in Oracle Forms? I am trying to use the set_menu_item_property function but this takes 'menu.item' format for the first argument. I am trying to enable/disable a menu item in the form of 'menu.item.subitem' and was not able to do it using this function. If anyone knows a different function or method, please reply. I have shown an example below.
Setup -> Software -> Front Page
From the above example, I can enable/disable Software using set_menu_item_property function. But, how do I enable/disable the Front Page menu in Oracle forms at runtime?
Thanks
Edited by: user480347 on Aug 24, 2010 3:37 PM

Yes you are on the right track. You need to pass then complete menu name to set_menu_item_property
Immediate_parent menu.item_name e.g
For example you have menu like this
Id like
A1 A10 > A1010
Home > Input > Form 1
A1 A10 > A1020
Home > Input > Form 2 To disable Form 2 you must pass menu name as
A10.A1020Hope it helps

Dynamically enable a field based on a selected table row

Hi everyone.
I'm getting really confused right now, please show me the right way. My approach may be, and probably is, wrong since I am self learning this and all I have is an ASP.NET background.
I have a page with a table in it. I've created a DataControl for a collection I've made and mapped it to the table. I added a column that shows an "edit" button. On it's click, I open a popup that shows the selected row's data. Naviguation controls are also present on the popup.
This is working fine.
My problem comes in the popup. Each row has multiples fields. These fields, shown on the popup, need to dynamically be enable/disable. To toggle those field, the only way I can see right now is to have a function that takes into parameter the rowId and the fieldName. Based on those two fields, I can get the necessary information to know if I need to enable or disable the control.
What I was aiming for, but then again I totally failed, was to have that function called on the "enabled" EL Expression, returning a Boolean.
Now that this has been said, can someone guide my on how to dynamically enable/disable each field based on the selected row.
Thanks !

Above +
why don't you create a bean method that returns a Boolean ans through EL Expression Builder select the method to this property.
btw .. on which components are you setting this?
Also,
If there is business logic that prohibits to update this object unless that is met.. you can also do it as..
In EOImpl .. override isAttributeUpdateable(int i) method eg:
@Override
public boolean isAttributeUpdateable(int i) {
if(i == this.ENAME && "KING".equalsIgnoreCase(this.getEname())){
return true;
}else
return super.isAttributeUpdateable(i);
and then in UI for the component say
ReadOnly = #{bindings.Ename.updateable}
Or, In UI
disable = #{ bindings.Ename.attributeValue == 'KING' & bindings.Mrg.attributeValue == null ? true : false}
adf does provides many ways to do it ..
Cheers, Amit

Dynamic enabling of input fields via radio btn in report selection screen?

Hi there!
I was wondering whether one can dynamically enable/disable input fields on a selection screen of a report-program.
Or is this only possible for selection screens in dynpro-programs?
If possible for reports - could you give an example?
Thanx a lot.
Andreas

Hi,
yes..You can dynamically disable and enable inputs fields in the selection screen..
Check this ex..If you press the first radio button..The second input will be disabled...And vice versa..
PARAMETERS: p_r1 RADIOBUTTON GROUP g1 USER-COMMAND usr DEFAULT 'X',
p_r2 RADIOBUTTON GROUP g1.
PARAMETERS: p_input1 TYPE matnr MODIF ID m1,
p_input2 TYPE matnr MODIF ID m2.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF p_r1 = 'X'.
IF screen-group1 = 'M2'.
screen-input = '0'.
ENDIF.
ELSE.
IF screen-group1 = 'M1'.
screen-input = '0'.
ENDIF.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
Thanks,
Naren

Need help with OA Framework. Enable/Disable LOV dynamically

Hello,
I am new to OA Framework. My requirement is as follows;
The page should have a field with parameter org code (LOV). When the user selects an org and click GO button, the page should display all the inactive items (which have no Sales order or work order for last 2 years). In the table region, user selects single record or multiple records by a check box. The selected records should be processed after clicking a submit button in the table region. The process is, calling an API to change the status of the item to Inactive or some other status. The status should be determined by the user by selecting a LOV within the table region. I could create LOV based field for org code and could display the data on the page. I have been trying to display the LOV for item status , I have created a LOV under table region under table components > table actions. I could open the LOV and select a value, but the value is not defaulting to the field on the page. Somebody please help me with a suggestion or if you have the code for a similar kind of requirement please share with me.
Also, need some suggestion on how to enable and disable LOV dynamically. I want to display the 2 LOV's in different regions. I want to enable the LOV for Item Status only after the org code is selected and the page populated after the user clicks GO button.
Thanks in Advance…..

Hi,
I could open the LOV and select a value, but the value is not defaulting to the field on the page.pls check the LOV mapping ,this might be wrong.
to enable/Disable LOV dynamically ,u need to use PPR,please check the lab solution exercise create employee chapter to learn to implement PPR functionality.
Thanks
Pratap

How to use a radio button in enabling/disabling a text box in report progra

Hi,
    Could any please let me know, how to use a radio button in enabling/disabling a text box in report program.

*& Report ZMR_RADIO_BUTTONS
REPORT ZMR_RADIO_BUTTONS.
PARAMETERS : R1 RADIOBUTTON GROUP G1,
             R2 RADIOBUTTON GROUP G1.
PARAMETERS : A1 TYPE I,
             A2 TYPE I.
AT SELECTION-SCREEN OUTPUT.
*initialization.
IF R1 = 'X'.
LOOP AT SCREEN.
IF SCREEN-NAME = 'A1'.
   SCREEN-INPUT = 0.
    SCREEN-ACTIVE = 0.
ENDIF.
IF SCREEN-NAME = 'A2'.
   SCREEN-INPUT = 0.
    SCREEN-ACTIVE = 1.
ENDIF.
ENDLOOP.
ENDIF.
IF R2 = 'X'.
LOOP AT SCREEN.
IF SCREEN-NAME = 'A1'.
   SCREEN-INPUT = 0.
    SCREEN-ACTIVE = 1.
ENDIF.
IF SCREEN-NAME = 'A2'.
   SCREEN-INPUT = 0.
    SCREEN-ACTIVE = 0.
ENDIF.
modify screen.
ENDLOOP.
ENDIF.
START-OF-SELECTION.
*IF R1 = 'X'.
*LOOP AT SCREEN.
IF SCREEN-NAME = 'A1'.
   SCREEN-INPUT = 0.
   SCREEN-ACTIVE = 1.
ENDIF.
*ENDLOOP.
*ENDIF.
*IF R2 = 'X'.
*LOOP AT SCREEN.
IF SCREEN-NAME = 'A2'.
   SCREEN-INPUT = 0.
   SCREEN-ACTIVE = 0.
ENDIF.
*ENDLOOP.
*ENDIF.

Dynamically enabling/disabling results using RunState.Execution

Similar Messages

Maybe you are looking for