Dynamically linked After Effects comps causing Premiere to freeze (after latest updates)

Normally in a dynamic link, any changes made in After Effects would be displayed in Premiere within a few seconds. However, after the latest software updates... it now takes 1-2 minutes and the Premiere interface is completely frozen during that time.
Anybody else having similar issues?
-Pete

Hi, thanks for the link but I'm having a different issue. My Premiere interface actually freezes and I'm unable to use Premiere for 1-2 minutes.
App Nap is disabled for all Adobe apps and I do frequenly empty my Adobe Media Cache and After Effects disk cache and it doesn't prevent the freezing.
Or sometimes just having a dynamically linked After Effects comp on the timeline slows Premiere down to the point where even scrolling through assets in my project panel is very jerky.

Similar Messages

Not able to render After Effects comp in Premiere CC Pro using Dynamic Link

I've noticed that I'm not able to completely render a After Effects comp inside a Premiere CC sequence. The render bar goes about half way and stays there. I found I have to quit After Effects for the render in Premiere to complete. Is this normal?
I'm running Mavricks on the new Mac Pro.

It's not normal on Windows.

Can't apply transitions to After Effects comps in Premiere Pro

Hi people, newbie Premiere user here (my boss is trying to convert me from FCS) :-) I downloaded the trial version of CS5 and want to learn as much as I can before my initial 30 days is up. My initial experience has been pleasant, but I've come up against an obsticle I could sure use some help with.
1)     Creating my timeline with serveral clips
2)     Exporting certain clips to After Effects; 'Replace with After Effects composition'
3)     Adding my effects
4)     Back in Premiere Pro my clip is replaced by the comp.
5)     Try to apply a simple cross-dissolve across 'Comp 01/Comp 02'
PROBLEM!
Seems the transition will only snap to the start of the second comp. With clips I can drag & drop the effect to span the clips and get perfect results, but not on an After Effects comp.
6)     In Premiere Pro 'Effect controls' change parameter so that the transition centre is at 'cut'
The result indeed spans the clips, but the effect quality is terrible - decent fade from comp 01 to a sudden dip to black before fade-up on comp 02.
Yes, I understand the 'Layers' concept, but I'm not asking the software to do anything nonsensical, just a simple cross-fade across 2 comps.
I really would appreciate any advice anyone can offer, I'd really like to be converted (mainly because if I AM my boss has promised to buy me a licence when my 30 days are up!) :-)
All the best
Steve

To expand a bit on Colin's comments, back in the film days, the concept of Handles was easy to grasp, as the pieces of film were on an A and a B Roll, and the editor had to physically overlap them by the desired amount, so that the lab could print with a Dissolve. The same held for the days of A-B Roll digital editing, where the Clips were again physically overlapped on separate Tracks. Then, digital editors were developed that allowed one to edit with the Clips on a single Track, and where Transitions were applied between them. The Handles were necessary still, but were no longer visually obvious.
These images will tell you a bit more about the concept:
Hope that this helps,
Hunt

How to import original clips edited in After Effects into Adobe Premiere, without the After Effects

What is the quickest and easiest way to bring clips that were edited within after effects into adobe premiere? I just want the original clip as it is cut, without any of the after effects manipulation. I am trying to gather the cuts of a green screen project together that was compiled and edited within Adobe After Effects, so they can be rekeyed. I want to detach all effects work, and just have a straight green screen cut of the original files. Each cut though, is its own compilation. Simply importing to a new sequence doesn't seem to be the answer because I first have to uncheck many effects to find the original clip buried beneath layers of mattes and various effects. I have probably 400 different cuts, and currently my workflow is super slow just searching for the original clip in after effects, looking for the time code, then matching the original clip and timecode into Premiere. Is there a faster an easier workflow?
Thank you

I just want the original clip as it is cut, without any of the after effects manipulation.
Then you need the original clip.
my workflow is super slow just searching for the original clip in after effects
It's what you may need to do, though. Unless you know exactly where the clips are on the hard drive.

Adobe Media Encoder CC renders do not reflect changes to Dynamically Linked After Effects Comps

When rendering a Premiere timeline with a dynamically linked After Effects composition, Adobe Media Encoder will sometimes use an older version of the linked composition (even after I have saved changes in the After Effects comp).
For example, if I correct a spelling mistake on some text in After Effects, save the composition, and then add the sequence to the render queue in Premiere, the final output from media encoder still has the old spelling.
If I do a straight export from Premiere instead of adding to render queue, the output is always correct. I've noticed this problem on several different Windows 8.1 systems.
All versions of the software are up to date as of today.
Why is this? Is it something to do with the disk cache in After Effects? Does media encoder have it's own cache that I need to clear?

Hi, I've been having this same issue. Here are some additional things I've noticed about it:
Changes are reflected properly when played back on timeline in Pr CC 2014.
Happens regardless if the dynamic link file was rendered or not, thus deleting the render files does not fix the issue.
The issue can persist through saving, closing, and reopening both AE and Pr.
I'm using OSX 10.9.4, so this is not just a PC issue.
Other than manually watching for every change to be reflected in the render, there is no way to know a problem has occurred. Needless to say this can be incredibly costly.
Please address this quickly, it's completely unacceptable that what we render out could be a different version from what we see on the timeline.
PS Some additional things I will be testing:
Does the issue persist through closing all CC apps, including Media Encoder.
Does rendering directly out of Pr, i.e. not using Media Encoder, fix the issue.

Program monitor constantly freezing/stalling when playing dynamically linked After Effects comps

I'm having program monitor issues when I try to play dynamically linked After Effects comps from my Premiere timeline. I realize it's expected to have jerky playback since After Effects comps are memory and CPU intense, but it doesn't seem normal for these things to happen:
Sometimes during playback, the program monitor completely freezes while audio continues to play and the CTI continues to move along timeline. When this happens, there's no way to stop the playback at all using mouse or keyboard... so I'm forced to just quit Premiere and re-open project.
Program monitor can also freeze when I place the CTI on top of the After Effects comp. Sometimes if I wait a minute, the screen could update and eventually display the After Effects comp.
I'm unable to render effects on the Premiere timeline because it just hangs at "Rendering frame 0" and never advances forward.
There's nothing special about the After Effects comp I'm linked to... it could just be regular text that I animated using ease keyframes and motion blur.
I originally thought it was related to GPU settings but it doesn't make a difference if I set After Effects to use CPU instead of GPU or set Premiere's Mercury Playback engine to software, CUDA, or openGL. I even have the latest CUDA drivers installed on my Mac. But I must mention that this issue got significanly worst after updating to OSX 10.9 Mavericks.
Here's my system details:
OSX 10.9 Mavericks
Premiere 7.0.1 (105)
After Effects 12.0.1.7 (I installed the OS X Mavericks crash update fix)
The most prevalent error messages displayed in the OSX console is:
Adobe Premiere Pro CC[402]: dynamic_cast error 1: Both of the following type_info's should have public visibility. At least one of them is hidden. N5dvaui2ui8MessageTIKNS0_7UI_NodeEEE, N5dvaui8controls23UI_PictureSupplyMessageE.
Here's a few that are less common:
Adobe Premiere Pro CC[402]: [PremiereCocoaMacApplication handleMenuCommand:1633841013 from <DVAMacMenuItem: 0x6100002f8300 About Premiere Pro>]
After Effects[377]: -[NSMenu menuID]: unrecognized selector sent to instance 0x600000077080
If anybody has any ideas or suggestions, I would really appreciate it.
Thanks,
-Pete

I think I found the problem... OSX Mavericks introduced a power saving feature called App Nap that basically slows down an app that appears to be doing nothing or is minimized in the background.
So essentually when I try to display an After Effects dynamically linked comp via my Premiere timeline, it freezes because OSX put After Effects to sleep.
To fix this, I had to disable the App Nap feature on After Effects. Now everything is performing back at pre-Mavericks levels (which is about 10% stalling playback issues vs 90% stalling). I also noticed that all of the console errors went away.
To disable App Nap in OSX...
Go to your Applications folder
Expand the After Effects CC folder
Right-click on "Adobe After Effects CC.app" and select Get Info
Add a checkmark beside "Prevent App Nap"
Restart the application
I also did this with all my Adobe apps just to be safe.
Hope this helps
-Pete

How can I sync up my clip in Premiere Pro with the After Effects Comp I replace it with? How do I link them?

I am having some issues seeing a tracked mask work correctly in Premiere Pro. I clicked on my clip in my Premiere pro project and hit "replace with after effects comp". After correctly masking out everything in AE and tracking it to perfection, I clicked save and went back to my Premiere project. However when I view the new "linked" clip in my project it has dropped frames. The mask seems to track correctly but the dropped frames are an issue. Does anyone know how I could fix this?
Thanks,
Ajnies

When I return to the linked clip in my Premiere project, it does not contain every single frame of the original after it has been replaced by the AE comp. It skips about every other frame. I am doing a stop motion animation so this is highly noticeable.

Dynamic Link from After Effects CC to Premiere Pro CC Performance Issues

I just updated my After Effects and Premiere Pro to CC and since doing so I've found numerous performance issues. One that is seriously hurting my workflow is the poor performance of the dynamic link with After Effects compositions into Premiere Pro. In CS6, you could make a change to the AE composition, save it, click over to Premiere Pro and it would quickly update and you can play your timeline and preview your changes. You could also move the clips around and add cross dissolves and watch the changes quickly in Premiere Pro CS6. Now, since updating to CC, if you save the composition in AE and click over to Premiere Pro it won't update on its own. Sometimes it just shows a single frame of the AE composition. I found that if you right click and "Edit Original", go into AE and then click back over to Premiere Pro and it will finally update. But if you make any changes to the placement of the AE composition on the timeline, or add a cross dissolve, fade, etc. it again won't play the AE composition any longer. After you make any changes to the AE composition you have to right click and go to "Edit Original", go into AE, and then click back over to Premiere Pro.. Then it will finally update.
iMac
Quad Core 3.4GHz
32G RAM
OS X Mavericks

Thanks Kevin.
Unfortunately in my case the export doesn't solve the issue. The video only looks good while in the composition... I've tried exporting it in all the different formats with several codecs, but to no avail...
You can check my own post in the After Effects forum: AE linked composition looks different in Premiere

Adobe Media Encoder Dynamic Link Server NOT CONNECTING to Premiere Pro

I have Media Encoder CS5, as part of the Creative Suite 5. My programs say that I have no updates to install, so everything is up to date.
I am having an issue with the dynamic link server.
Here's what has happened thus far.
Recently when I have tried to encode a project sequence from Adobe Premiere Pro it DOES NOT work. This is the first time that has happened.
I repeated the process and again, it still happened, unable to connect to the Dynamic Link.
The Error messages that I was getting was "could not read from source. Check if it has been moved or been deleted"
Once, I received this, I went to check to see if all files were linked properly, and they were. Everything was rendered and all was good in the timeline and the project itself.
Yet, again, the error message appeared.
Then I tested a previous project that I knew had been exported and worked through Adobe to Media Encoder. And all the files were linked properly and yet again received the error message I wrote above.
Then I thought the Dynamic Link itself wasn't working properly, so I tested importing an Adobe After Effects Comp into a Premiere Timeline and it DID WORK.
Then I went and tested if a video file of an already exported project would be able to sync to Media Encoder. And this WORKED.
I then went to add the file directly from Media Encoder and when I went to add a sequence from a saved Premeire File, it would take about 5 minutes "Connecting to Dynamic Link Server", to then state, "Connecting to Dynamic Link Server Failed"
My question is, how do I fix the dynamic link between Media Encoder and Premiere? Because, additionally, importing and After Effects Sequence works with Media Encoder.

I've been searching/troubleshooting for days, none of the firewall, new shortcuts in folder, antivirus, you name it I tried it even wiped my system which seemed to work at first..
What did it for me in the end was I had Dxtory (a software recorder, for recording gameplay) running on startup, and somehow it interfered with only Premiere projects in Media Encoder, I could still import AE projects go figure.
Check all the programs you have running or use sometimes, if they have some sort of hook into other programs/deal with video/codecs this could be your problem too!
Thanks to everyone trying to solve this problem!
-JonOfAllGames

Making new after effects comp question

If i go to file>adobe dynamic link>new after effects comp is there anyway i can make the length of the comp depending on my in and out on the timeline i want or am i forced to have a standard automatic 30 seconds that it makes for me?

What is that suppose to mean? I sent in a request to have this implimented as a feature in the next update, we'll see how that goes. I understand that you can make the duration edit inside the composition setting, but why should i have to do that? Doing this and then relining it up back in premiere wastes time. I should be able to do it based on the In and Out on my timeline.

Error with "Replace wtih After Effects Comp"

When I use "Replace with After Effects Comp" on a clip in Premier CS5 (Mac), it sends the clip properly, I make my effect in AE (stabilize motion), save, then go back to premier and there is not change to the clip in premier (the change was clear and obvious in AE). In the lower right is a red circle wth an X -- clicking on it indicates "an unspecified error ocurred performaning an action" on the saved AE file.
The clip in Premier is marked red and indicates it is linked to the AE file, but the applied effect has not come through, it just looks like the original.
However, when I make other changes in AE, sich as adding text, no problem -- it updates in Premier.
What could be preventing "Replace with After Effects Comp" from workgin with AE stablizie image tracking files?
Using CS5 on a Mac (10.6.7) wiht the latest updater updates installed on all CS5 products)
Really stuck here. Thanks!
-August

Can I not render wihin AE and have the rendered clip automatically link into Premier?
This method should give you realtime playback of your Ae comp
in the Pr timeline, but you will still have to render first.
Use the "Post-Render Action" in the Ae render queue to import your
completed render into your Ae project, then drop it into your
composite as the top layer, solo that layer, then save and exit.
Open Pr, and you should be able to play the composite without
having to render the timeline... unless there is a deficit in the
horsepower of your rig as Jim suggested in an earlier post.
Post-render actions
http://help.adobe.com/en_US/aftereffects/cs/using/WS3878526689cb91655866c1103a4f2dff7-79d5 a.html
Here are some useful links courtesy of Todd Kopriva:
Working with Adobe Premiere Pro and After Effects
http://help.adobe.com/en_US/aftereffects/cs/using/WS4648B7F7-2D89-4765-BC8A-271D9A7574A3a. html
FAQ: What is the best format for rendering and exporting from After Effects?

"Replace with after effects composition" on Premiere gives me a empty AE project...

I'm selecting and right clicking footage from my Premiere timeline, clicking "Replace with after effects composition", and getting a black, empty screen on After Effects.. There is no footage under Project in AE, and the footage I selected on Premiere also became black. .
I'm using the CS5 version of both programs, and video clips from my 7D... What could be wrong?

I am also having this problem. It worked before but now it isn't I did change to Windows 8 recently but I don't know why that would cause it. Here are some pictures to show
Premiere Pro CC and AE CC both updated today, both restared today. You can see the footage is there and PP is reading it. It is an MPEG2 file. easy.
Right Click on replace with after effect comp
AE opens up and I create a new project
Comp is blank. No footage. Lenght is correct though.
If I tab back to Premiere the footage is gone and shows only black.
Please help.

After Effects AND/OR Premiere Pro CS5 ?

Hi guys,
I am quite new, I have only done one videoproject and that was in Premiere Pro CS4. Now I got a new machine and have both Premiere Pro CS5 and After Effects. I have started learning AE from some videos and it is quite impressing what you can do there. So I hope I can use AE to improve my videos.
My question is, shall I do the project in PPCS5 and then connect to AE for making special effects on clips or shall I do the whole project in After Effects ?
If I choose AE for the project, will I miss some functions from Premiere Pro?
Many thanks in advance !
Sven

Thank you guys!
You put me on track, expecially with the link!
From beginning I am just taking care of old videos that noone look at because not edited so most of the time just crap.
I want to edit them, try to improve color and sharpness but also add some funny elements so they are more interesting to watch.
I have 30 videos from my daughter, each 1 hour and 8 of my own (really crap) and 8 VHS from a friend. That is just to start with.
Start Adobe Premiere Pro from within After Effects and capture footage for use in After Effects. (See Use Adobe Premiere Pro for capture (Production Premium and Master Collection only).)
Use Adobe Dynamic Link to work with After Effects compositions in Adobe Premiere Pro without first rendering them. A dynamically linked composition appears as a clip in Adobe Premiere Pro.
Use Adobe Dynamic Link to work with Adobe Premiere Pro sequences in After Effects without first rendering them. A dynamically linked sequence appears as a footage item in After Effects.
Start After Effects from within Premiere Pro and create a new composition with settings that match the settings of your Premiere Pro project.
Select a set of clips in Adobe Premiere Pro and convert them to a composition in After Effects. "
So with a testvideo I will start using these 5 different methods so I learn when to use which one!
And I also have 4-5 videolessons to watch.
Thanks again!
I probably be back soon with more questions!

Rendering After Effects Comps can be very slow

I have a PP CS6 project which has quite a few in-line After Effects comps in the main sequence. The are all image stabilisation (for clips which are are of a different size of the sequence). When I render then most of fairly quick (several frames a second) but some are very slow (a frame every few seconds). The settings on the warp stabilise is the same for all of them. It seems to be the longer clips that cause problems (sometimes over 30 secs). Anyone know why or got a way to speed up the longer clips?
Ben

Captain Mench wrote:
Now -- if you need to export an alpha channel out of AE then you'll need some specific formats.
Good luck,
CaptM
Welcome home, Mench!
To maintain the alpha channel from AE, the OP will want to look up how to be using two codecs, Animation and ProRes 4444. Both are extensively described in the help system for FCP and After Effects or just google them for several hours of interesting reading. The OP will also need to understand the concept of an alpha channel which, come to think of it, was difficult for me.
bogiesan

PPro CS4 crashes when importing After Effects comp

I am using Premiere Pro CS4 on Mac, when i try to import an after effects comp that uses the zaxwerks "flag" plugin, premier crashes...why?

Does this happen only when you use the plug-in, or for all comps?

Dynamically linked After Effects comps causing Premiere to freeze (after latest updates)

Similar Messages

Maybe you are looking for