Dynamically Selection Screen Change

Hi Experts,
I have 5 buttons on the application toolbar and on click of each button, i need to populate difference selection parameters.
I have tried modifying the SCREEN table dynamically but maintaining SCREEN table for 5 different action seems very difficult.
Can you provide any alternate to address this scenario?
Thanks
Ankur

hi ,
try this..
in this text boxes are displays and disapper on the selection of radio button.....
*& Report Z_TG_LOOP
REPORT z_tg_loop.
DATA : rb1(1) VALUE 'X',
       rb2(1).
CALL SCREEN 8000.
*&      Module STATUS_8000 OUTPUT
*       text
MODULE status_8000 OUTPUT.
* SET PF-STATUS 'xxxxxxxx'.
* SET TITLEBAR 'xxx'.
IF rb1 EQ 'X'.
    LOOP AT SCREEN.
      IF ( screen-group1 EQ 'ABC' ).
        screen-invisible = 0.
        screen-active = 1.
      ELSEIF ( screen-group1 EQ 'DEF' ).
        screen-invisible = 1.
        screen-active = 0.
      ENDIF.
      MODIFY SCREEN.
    ENDLOOP.
ELSE.
    LOOP AT SCREEN.
      IF ( screen-group1 EQ 'DEF' ).
        screen-invisible = 0.
        screen-active = 1.
      ELSEIF ( screen-group1 EQ 'ABC' ).
        screen-invisible = 1.
        screen-active = 0.
      ENDIF.
      MODIFY SCREEN.
    ENDLOOP.
ENDIF.
ENDMODULE.                 " STATUS_8000 OUTPUT
*&      Module MODIFY INPUT
*       text
MODULE modify INPUT.
IF rb1 EQ 'X'.
    LOOP AT SCREEN.
      IF ( screen-group1 EQ 'ABC' ).
        screen-invisible = 0.
        screen-active = 1.
      ELSEIF ( screen-group1 EQ 'DEF' ).
        screen-invisible = 1.
        screen-active = 0.
      ENDIF.
      MODIFY SCREEN.
    ENDLOOP.
ELSE.
    LOOP AT SCREEN.
      IF ( screen-group1 EQ 'DEF' ).
        screen-invisible = 0.
        screen-active = 1.
      ELSEIF ( screen-group1 EQ 'ABC' ).
        screen-invisible = 1.
        screen-active = 0.
      ENDIF.
      MODIFY SCREEN.
    ENDLOOP.
ENDIF.
ENDMODULE.                 " MODIFY INPUT

Similar Messages

Dynamic selection screen change in Selection Screen.

Hi Experts,
I am not getting dynamic screen change on selection screen. can you give solution for the following scenario.
I have 3 radio buttons on selection screen. Example: R1, R2, R3.
I have 5 fields on selection screen. Example : F1, F2, F3, F4, F5.
When i select radio button 1 i will get F1 field screen only.
When i select radio button 2 or 3 i will get F2 and F3 fields screen only.
When i select radio button 3 i will get F4 and F5 fields screen only.
Any one give me solution for the above scenario very much thankful.
Thanks in advance,
Sai

Hi
try this code,
REPORT ZTEST_3RB.
TABLES : KNA1,EKKO,VBRK.
PARAMETERS : SALES RADIOBUTTON GROUP VIJJ USER-COMMAND VJY ,
PUR RADIOBUTTON GROUP VIJJ ,
BILL RADIOBUTTON GROUP VIJJ ,
TOTAL AS CHECKBOX.
SELECT-OPTIONS : S_CUSTNO FOR KNA1-KUNNR MODIF ID AKP DEFAULT 1000 TO 1033,
S_PONO FOR EKKO-EBELN MODIF ID VKP,
S_BNO FOR VBRK-VBELN MODIF ID PKP.
INITIALIZATION.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF SALES = 'X'.
IF SCREEN-GROUP1 = 'VKP'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'PKP'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ENDIF.
ELSEIF PUR = 'X'.
IF SCREEN-GROUP1 = 'PKP'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'AKP'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ENDIF.
ELSEIF BILL = 'X'.
IF SCREEN-GROUP1 = 'AKP'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ENDIF.
IF SCREEN-GROUP1 = 'VKP'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ENDIF.
ENDIF.
ENDLOOP.
i think this will help your problem,
Regards,
Vijay

How to deal with dynamic selection screen elements when macros are used?

Hello experts,
This is regarding the dynamic selection screen elements. Actually the requirement is to modify the existing standard report program RFUMSV00 by copying it into a Z report, adding a few selection screen elements and new fields in the output. I actually did everything required except for the one thing that is going out of my reach.
There are a certain fields which are coming when they are not supposed to get displayed. I don't understand the code because of its obsoleteness. Neither can I debug it because it is just data declaration.
This is the code where there is a fault. If I copy the entire code into a new Z report, I'm getting new fields like Entry Date, Document Type, Reference Transaction, Reference key, Logical system.
DEFINE selection_screen_line.
selection-screen: begin of line.
parameters &3 like &4 default 'X' modif id mc4.
selection-screen: comment (30) &1 for field &3 modif id mc4.
selection-screen: comment pos_low(10) text-019
                    for field &2 modif id mc4. "neu
parameters &2 like rfums_alv-variante modif id mc4.
selection-screen:
      position pos_high.
selection-screen: pushbutton (15) text-028
                    user-command &5 modif id mc4.
selection-screen end of line.
END-OF-DEFINITION.
Kindly, suggest me the right solution.

In the program attributes ( SE38 > RFUMSV00 > GOTO > Properties ), you will find a logical database BRF declared. The include DBBRFSEL is part of the selection screen of this logical database.
The selection screen is actually the selection screen of this logical database.
Under the Logical Database field, there is a Selection screen field where you can input which selection screen of the logical database to be used.
But, this is just to change the selection screen that is displayed. To completely suppress it you need to remove logical database declaration from the properties of the program and call it inside your program through function module.
You cannot just remove it from the declaration because many of its variables are used in the program.
So call it using function module as the first step in INITIALIZATION section of the program.
The syntax and function module to call it in your program can be found in the following thread :
How to hide the selection screen of a Logical datebase?
Regards,
Ashish

Passing values to a dynamic selection screen via a report

Hi,
I have the following problem and need to seek your expertise urgently.
In my program, I need to call another report by passing in parameters to the selection screen of other report. However, I could not pass values into a dynamic selection screen. I tried to use submit (report) with free selection but do not know how it works.
Currently, I tried calling the function RS_REFRESH_FROM_DYNAMICAL_SEL and FREE_SELECTIONS_RANGE_2_EX. Using the object the first function has returned to me, I tried to append values such as fieldname etc to it. However, I realised the field names of a dynamic selection screen keeps changing. So I would not know how to pass a particular value to a selection field.
Appreciate any help given.
Thanks,
CK

Hello CK,
Are you using logical database in your selection screen program attributes? If it is, look at include file DBxxxSEL for parameter named xxxDYNSE where xxx = logical database. Debug the program that has that dynamic selection, and look at field xxxDYNSE. This should give you a hint on how to populate the parameter when you submit the program.

Dynamic selection screen

Hello all,
I have a requirement to create a 'dynamic' selection screen with 2 sections(vertical).
The first section contains set of selection options for which the type comes from the values stored in the internal table(populated at runtime). The second section contains checkbox corresponding to each selection option generated/created in the first section mentioned above.
So the number of fields and checkboxes to be created are identified only at the runtime.
Note: I already tried to use FMs FREE_SELECTIONS* but it is not serving my purpose.
Looking forward to your inputs.
Thanks & Regards,
Rajat
Edited by: rajat.sap123 on Feb 7, 2012 7:18 PM

Why don't you use the At selection-screen output event.
As i have understood your scenario you have two sections. with the first one containing the select-options. The second will change on basis of the first section selection.
Hope it helps you.
Elaborate a bit more so i can paste a code.

PF status in dynamic selection screen

Hi,
I am creating a dynamic selection screen ,it is having the default PF_status .But now i want to give a different PF_status in that dynamic selection screen.
Like if i press the back button it should take me to the previous screen,but now it is going to next screen.So,Please help to change the functionality of the BACK button.
thanks in advance
Sravanthi

Hi Sravanthi,
Set your PF status in event 'At selection-screen output' of your dynamic selection screen.
Handle Back operation in event 'At selection-screen'.
AT SELECTION-SCREEN OUTPUT.
SET PF-STATUS 'TEST'.
AT SELECTION-SCREEN.
CASE sy-ucomm.
WHEN 'BACK'.
" Ur code
ENDCASE.
Thanks,

Dynamic selection screen with ABAP web dynpro

Hi all.
    How can I create dynamic selection screen with ABAP web dynpro? Thank you in advance.

hi yinglak.....
         this is possible........ all the ui elelments has the property called visible and enabled.... just assign an attribute of type wdui_visibility to the visible property....
in the wddomodify method..... check for the radio button value and pass the value true or false to this attribute and it gets changed automatically.
---regards,
   alex b justin

Add certain field at dynamic selection screen in FBL3N transaction

Hello Expert,
I would like to add entry date field (BKPF-CPUDT) at dynamic selection screen in FBL3N transaction.
So, I went to SE36 transaction and changed something in selection view for SDF.
However, it didn't work.
Is there anyone who knows how to add a certain field at dynamic selection screen in FBL3N transaction?
Thanks in advance.
BR,
Chris Kim

Hi
Refer to the following thread
Additional field selections in FB03
It talks about adding Header Text field
You should be able to add entry date similarly
Regards
Sach!n

How to add a new Field in the Dynamic Selection screen section.

HI,
There is a requirement in which I need to add a field in existing program of dynamic selections.
I need to add a field KNKK-DBRTG (Customer Rating) in dynamic selections screen of some existing report
which has a dynamic selection screen with other fields like customer account, company code etc. Along with this i need to add Customer rating field also in the selection screen.
I have used GET KNKK statement to select this in the Dynamic selection screen. But I need to make it appear
on the screen.
LDB used is the Customer Database.
I have added GET KNKK statement after GET KNA1 statement.
Can any one help me how we can make this rating field appear in the selection screen.
With the GET statement Credit control area Fields can be selected in the selection screen but I have to permanantly add the field in the selection screen.
Regards
Prashant Prabhu

Hi,
So you need that this new field have data in old records?
1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
2.- If condition "1" is not yours.
First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
Hope it helps. Regards, Federico

Exclude one field from Logical Database's dynamic selection screen

Hi Guru,
I have a requirement to amend a program to exclude the document number field (bsik-belnr) from the dynamic selection-screen of the logical database KDF(Vendor Database) so that the program will not filter according to the document number.
I have use the below syntax in my zprogram.
selection-screen exclude select-options: doc-no.
However I get syntax error "The addition EXCLUDE is only allowed in INCLUDE DBKDFSEL".
Please advice.
Best Regards,
Fung

The selection part of the logical database defines input fields for selecting data.
          The runtime environment displays these on the selection screen when you run an executable program linked to the logical database.
          Include called DB<ldbname>SEL.
        SELECTION-SCREEN BEGIN OF VERSION ver TEXT-xxx.
                                                                SELECTION-SCREEN EXCLUDE ... .
                                                SELECTION-SCREEN END OF VERSION ver.
Defines a selection screen version (with a three-character name ver ). Between BEGIN OF VERSION and END OF VERSION , you can exclude selection screen objects for the version ver , i.e. remove them from the selection screen with SELECTION-SCREEN EXCLUDE.
          SELECTION-SCREEN DYNAMIC SELECTIONS FOR TABLE dbtab
If one of these tables is active in the report (i.e. it is declared under TABLES or lies somewhere on the path from the root of the database hierarchy to a table declared with TABLES ), a pushbutton called 'Dynamic selections' appears on the selection screen.

Need to disable one of the select-options in dynamic selection screen

Hi,
we have copied the Standard program: RFDOPR00 into Z, my requirement is to disable one of the select-options in dynamic selection screen for ex: Reason code(User shouldnot able to enter anything in it).
Can anyone please tell me the procedure to do it... I had tried using at selection-screen but it doesnt work as it in 'LOOP AT SCREEN', i am not able to capture the Parameter name(screen-name).
Thanks,
Ravi

Hi,
Get inside your selection screen, by executing your program.
Now type /h in the field where you enter transaction code and press enter.
Now again press enter, this will take you debugger starting from your Selection screen.
You might be knowing this, still if you are not aware of this, this might be a valuable tip.
From here , you can trace your Parameter name.

How to use dynamic selection screen inputs in main program

hi all,
its a report where in it calls one dynamic selection screen( user need to enter the parameters here) after that i need to use those inputs for some check, can any buddy help how to use/ get that input parameters into main program.
regards,
vara..

Hi,
i think u have created that dynamic selection screen in seperate program and calling to ur main program.instead of that u just create that synamic selection screen program as include program and include it in ur main program.
or u need to use set/get parameter id concept.
rgds,
bharat.

How to retrieve values from Dynamic Selection screen while using LDB - PSJ

I am having problem in PSJ Logical database. In a custom report which is using PSJ LDB, we are using PROJ and PRPS_R tables.
When I run program it displays one dynamic selection screen, there we are giving selection criteria for PRPS (Master data WBS element) - Created on (giving some range like 2011/01/01 to 2011/01/31).
So I want to display all WBS element which are created during the period (2011/01/01 - 2011/01/31).
How do I retrieve the select-option low and high value of the field Created on Of WBS element if we Select data from any table based on this condition.
Please help me.
Thanks.

in fact you don't have to get the values, you only need to tell to the program to take them into account :
GET PRPS.
CHECK SELECT-OPTIONS.

Dynamic selection-screen parameters

Hi All,
Is it possible to create a dynamic selection-screen checkbox parameters at runtime. My requirement is :
I have Object parameter on the selection-screen, based on this it has to fetch the info structures and display it with checkboxes on the same selection-screen, so that the user can select which info structures to be processed and can save it as a variant.
Thanks,
Satya Priya

as per ur requirment....execute it and see
tables :DD02L,t002t,t002.
data : begin of itab occurs 0,
            tabname like DD02L-TABNAME,
        end of itab.
        data : tabname1 like DFIES-TABNAME,
        RSSELTEXTS1 type table of RSSELTEXTS with header line.
data : begin of RSSELTEXTS2 occurs 0,
         RSSEL type RSSELTEXTS,
         initial type c,
       end of RSSELTEXTS2.
data : begin of imakt occurs 0 .
       include structure t002.
data : end of imakt.
data : begin of ipara occurs 0,
         name(132) type c,
         text(132) type c,
        end of ipara.
data :srch_str(10) TYPE c,
     tot type i,
     ind type sy-tabix.
select-options : s_lang for t002-spras.
*PARAMETERS show_all AS CHECKBOX USER-COMMAND flag.
PARAMETERS showall1 AS CHECKBOX USER-COMMAND flag modif id sd.
PARAMETERS showall2 AS CHECKBOX USER-COMMAND flag modif id sd.
PARAMETERS showall3 AS CHECKBOX USER-COMMAND flag modif id sd.
PARAMETERS showall4 AS CHECKBOX USER-COMMAND flag modif id sd.
PARAMETERS showall5 AS CHECKBOX USER-COMMAND flag modif id sd.
PARAMETERS showall6 AS CHECKBOX USER-COMMAND flag modif id sd.
PARAMETERS showall7 AS CHECKBOX USER-COMMAND flag modif id sd.
PARAMETERS showall8 AS CHECKBOX USER-COMMAND flag modif id sd.
PARAMETERS showall9 AS CHECKBOX USER-COMMAND flag modif id sd.
PARAMETERS showal10 AS CHECKBOX USER-COMMAND flag modif id sd.
PARAMETERS showal11 AS CHECKBOX USER-COMMAND flag modif id sd.
PARAMETERS showal12 AS CHECKBOX USER-COMMAND flag modif id sd.
PARAMETERS showal13 AS CHECKBOX USER-COMMAND flag modif id sd.
PARAMETERS showal14 AS CHECKBOX USER-COMMAND flag modif id sd.
PARAMETERS showal15 AS CHECKBOX USER-COMMAND flag modif id sd.
PARAMETERS showal16 AS CHECKBOX USER-COMMAND flag modif id sd.
PARAMETERS showal17 AS CHECKBOX USER-COMMAND flag modif id sd.
PARAMETERS showal18 AS CHECKBOX USER-COMMAND flag modif id sd.
PARAMETERS showal19 AS CHECKBOX USER-COMMAND flag modif id sd.
PARAMETERS showal20 AS CHECKBOX USER-COMMAND flag modif id sd.
initialization.
at selection-screen output.
if s_lang ne ' '.
select * from t002 into table imakt where spras in s_lang.
describe table imakt lines tot.
loop at screen .
    if screen-group1 = 'SD'
       and screen-group3 = 'PAR'.
           ipara-name = screen-name.
           ind = screen-group4.
        read table imakt index ind.
           ipara-text = imakt-laiso.
           append ipara.
           clear ipara.
    endif.
endloop.
endif.
loop at ipara.
RSSELTEXTS1-name = ipara-name.
RSSELTEXTS1-kind = 'P'.
RSSELTEXTS1-text = ipara-text.
append RSSELTEXTS1.
clear RSSELTEXTS1.
endloop.
CALL FUNCTION 'SELECTION_TEXTS_MODIFY'
EXPORTING
    PROGRAM                           = sy-repid
TABLES
    SELTEXTS                          = RSSELTEXTS1
EXCEPTIONS
PROGRAM_NOT_FOUND                 = 1
PROGRAM_CANNOT_BE_GENERATED       = 2
OTHERS                            = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
if s_lang ne ' '.
loop at screen .
    if screen-group1 = 'SD'
       and screen-group3 = 'PAR'
       and    screen-group4 > tot.
       screen-input = '0'.
       screen-active = '0'.
     modify screen.
    endif.
endloop.
endif.
if s_lang = ' '.
loop at screen .
    if screen-group1 = 'SD'.
       screen-input = '0'.
       screen-active = '0'.
     modify screen.
    endif.
endloop.
endif.

Adding new table dynamic selection screen of transaction FBL5N (LDB DDF).

Hi,
I have a requirement to add SEGMENT (CEPC-SEGMENT) field on the dynamic selection screen of transaction FBL5N (LDB DDF).
Please let me know how can I meet this requirement
Thanks

I did not find any screen exits for this Tcode, may be you need to use enhancement spots.

Dynamically Selection Screen Change

Similar Messages

Maybe you are looking for