Dynamically set "mailto:" upon submit

Hi there,
How can I dynamically set the "mailto:" part of the submit form (and attach PDF)
From here:
https://forums.adobe.com/message/7025028#7025028
To add an action to button to send the form as an email, you can perform the following steps:
Add the "Submit a form" action to your Submit button.
Enter "mailto:" (including a colon) followed by email recipient(s).
Select "PDF The complete document".
Thanks

Thanks MobileDevCK for the fast response,
I regards to the user entering the email, thanks but i think you missed the /s
I am designing this in Acrobat Pro, I'm not sure how i'd be referencing code if i wasn't.
I've read the API, and it says:
submitForm
(cURL
cSubmitAs='FDF']
[cCharset='utf-8']
Submits the form to a specified URL. Currently only supports FormsCentral submissions.
but then FormsCentral will be retired on July 28, 2015. The service is fully functioning and available through June 22, 2015. Learn more.
I'm trying to get support on:
AcroForms
Most Acroform elements and their properties are supported, although email is currently the only supported submit type and barcodes are not supported.
I want to dynamically set (with code based on fields filled in) the email in acroforms
Thanks for you help.

Similar Messages

Dynamic setting of itemRenderer in datagrid

Can we dynamically set the itemrenderer in a datagrid
depending upon some value in data?

HI,
how about to display different controls in a rows for that column? Can it be done?
Thanks,,
-jenue

Smartview webf run time prompts upon submit are not picking up from the POV

Hi ,
I am in Planning 11.1.2.1 and using Smartview 11.1.2.1.103. After connecting to Planning Webform from Smartview, i am saving a composite form which should launch a Business Rule with run time prompts attached to the webform upon submit. The business rules are running with default run time prompts and it is not picking up the members from the POV ... is there a way to make it pick up the members from POV into the run time prompts upon saving it ? so far the workaround is to initiate the business rule from the planning tab in smartview .. any thoughts on this ? cheers

I found a known issue for smart view in 11.1.2.1 read me doc
11075506
When you open a data form in Smart View, if a business rule is directly attached to a composite data form that is set to Use Members on Data Form and Hide Prompt, the runtime prompt values are not picked up. Instead, the Runtime Prompt dialog box is displayed, and the user is prompted to enter a value.
Good Luck

Dynamically set flash chart height?

Hi,
I have a flash chart that includes a selector that alters the query for the chart. Depending on what the user selects, the chart shows a different number of rows (this happens to be a stacked horizontal bar chart, but this could apply to any chart type). I would like to be able to dynamically set the chart height based on the number of rows the query returns. If I set it too small and the user makes a choice that returns a larger number of rows, the chart bars are compressed to the point where the labels are unreadable or omitted altogether. Conversely, if I set the height to a larger value and the user makes a selection that results in a small number of rows, the chart is overly extended and hard to read.
I am able to calculate what I'd like the chart height to be using a page item and a before header process. But I can't figure out how to pass this value to AnyChart. I tried using an item substitution (e.g., &P7_CHART_HEIGHT.) as the value for the chart height on the Chart Attributes/Chart Settings page, but this attribute requires a non-zero numeric value. I tried to figure out if I could alter the chart XML, but could not figure out how to do it and I'm not sure item substitutions would be passed in the XML anyway.
Is there a way to dynamically set the height attribute of a chart at page load time?
Thanks,
Mike

Hi Mike,
You can update the Region Source of your chart, replacing the substitution strings *#HEIGHT#* with the reference to your page item *&P7_CHART_HEIGHT.*. So your chart region source should then look something like the following(note that I've trimmed some lines for display purposes), and when the chart is run it will pick up your setting for the height, based upon the value returned from your Before Header process:
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
    codebase="#HOST_PROTOCOL#://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0,0,0"
    width="#WIDTH#"
    height="&P7_CHART_HEIGHT."
    id="#CHART_NAME#"
    align="top">
<param name="movie" value="#IMAGE_PREFIX#flashchart/anychart_5/swf/...............................">
<param name="quality" value="high">
<param name="allowScriptAccess" value="sameDomain">
<param name="allowNetworking" value="all">
<param name="scale" value="noscale">
<param name="wmode" value="transparent">
<param name="FlashVars" value="initText=#FLASH_INIT#&xmlLoadingText=............................................">
<embed src="#IMAGE_PREFIX#flashchart/anychart_5/.......................................
       quality="high"
       width="#WIDTH#"
       height="&P7_CHART_HEIGHT."
       name="#CHART_NAME#"
       scale="noscale"
       align=""
       allowScriptAccess="sameDomain"
       allowNetworking="all"
       type="application/x-shockwave-flash"
       pluginspage="#HOST_PROTOCOL#://www.macromedia.com/go/getflashplayer"
       wmode="transparent"
       FlashVars="initText=#FLASH_INIT#&xmlLoadingText=#FLASH_................................................">
</embed>
</object>
#CHART_REFRESH#
{code}
I hope this helps.
Regards,
Hilary

Dynamically setting the number of collumns...

Hi,
I have a report that I need to build. In the requirements I need to dynamically set the number of columns based on the parameters given. I have some ideas on how to do this by building the layout to include all the columns. Then show or hide them based on the parameters passed. I was just wondering if anyone has tried to do something like this? If so, were you successful, and what were some of the major stumbling blocks you ran into. Or if you know of any links to documentation that would help would be great.
On a side note, would doing something like this be handled better if done in Discoverer? I have not used Discoverer before, so I'm not sure myself.
Thanks,
Tom

Hi Tom,
You will find useful information in these notes on Metalink:
261313.1: How to hide columns dynamically without blank spaces ?
1074438.6: How to dynamically set labels based upon globals
28533.1: How to create a dynamic report using lexical parameters for column names
And a comprehensive guide to using lexicals (you will have to use lexicals for column names)
115072.1: Complete Resource Reference for using Lexical Parameters in Oracle Reports
Navneet.

What is the difference between "create set" and "create dynamic set"?

What is the difference between "create set" and "create dynamic set"?
we have a complete cube ready for production that was tested and working without any issues in non-r2. we found that some "create set" assignments don't work in R2. But when changed to from "create set" to "create dynamic set"?
they are working, However, not sure how it will impact other areas of the cube.

Thanks YuliaKlimov, I can reproduce this issue, but I cannot explain the different behaviors between SSAS 2008 and 2008R2. As a workaround,
could you try to use dynamic set or create statics set but with fixed member for example:
CREATE
SET CURRENTCUBE.[Prior Month] AS
[Date].[Date Key].&[20050723].PrevMember
, DISPLAY_FOLDER = 'Relative Period Sets';
Personally, I think your set is dynamic set, because the currentmember is changed base on current selection. You can also submit this issue
on below official link to get confirmation from Product Group:
https://connect.microsoft.com/SQLServer/
Thanks,
Raymond
Raymond Li - MSFT

Dynamically setting column width doesn't work all the time

I wanted to dynamically set the width of a column in a JTable to be half of the width of a another column. This should happen whenever the frame is resized. But somehow I need to tell this twice to Java. If I don't then sometimes the column width isn't set new.
Is this a Java bug or what?
public void componentResized(ComponentEvent ce)
     try
          ref.table.getColumn(ref.rsmd.getColumnLabel(5)).setMaxWidth(ref.table.getColumn(ref.rsmd.getColumnLabel(1)).getWidth() / 2);
          ref.table.getColumn(ref.rsmd.getColumnLabel(5)).setMinWidth(ref.table.getColumn(ref.rsmd.getColumnLabel(1)).getWidth() / 2);
          // Again, or it won't work:
          ref.table.getColumn(ref.rsmd.getColumnLabel(5)).setMaxWidth(ref.table.getColumn(ref.rsmd.getColumnLabel(1)).getWidth() / 2);
          ref.table.getColumn(ref.rsmd.getColumnLabel(5)).setMinWidth(ref.table.getColumn(ref.rsmd.getColumnLabel(1)).getWidth() / 2);
     catch(SQLException e)
}

Is it possible that your call to
ref.table.getColumn(ref.rsmd.getColumnLabel(5)).setMinWidth(ref.table.getColumn(ref.rsmd.getColumnLabel(1)).getWidth() / 2);
is altering the response created by
ref.table.getColumn(ref.rsmd.getColumnLabel(5)).setMaxWidth(ref.table.getColumn(ref.rsmd.getColumnLabel(1)).getWidth() / 2);
? Have you tried calling them once but in the other order? Or just calling the "setMaxWidth" call twice and leaving out the second "setMinWidth"?
Good luck... :)

Dynamically set Tab current pages

Heres a quick summary of the situation Ive got.
Lets say I have an application with 4 report pages. Three display some data about rows in my database. All 3 contain the column Control # which is linked to the 4th report which displays more detailed information about that Control # object.
When I click on the Control # link and go to the 4th report, I would like the Tabs current for the 4th report to match the Tabs current of the page I came from. In other words, if I clicked on the Control # link on page 1, I would like the 4th pages current tabs to match page 1s current tabs. The same goes for pages 2 and 3.
Ive tried &(some global variable). and :(some global variable) and v(some global variable) in the Tabs current pages fields but that doesnt work.
Is it possible to do what Im trying to do?

Reports 1, 2 & 3 all exist in individual two tab pages. Pages 1 & 2 would have the same parent tab and their own sub tab. Page 3 would have its own parent tab. When in those pages the appropriate tabs are 'current'. When I click on Control # on any page and go to page 4, I would like the source pages tabs to stay 'current' when displaying page 4.
By the way, my actual application has in the neighborhood of a dozen pages which are like reports 1,2,& 3 as I described above. Rather than build a dozen identical (with the exception of current tabs) page 4's, I would rather build one page 4 and dynamically set page 4's current tab to the source page's current tab.
It's a visual reminder to the user as to which page they were on when they clicked the Control # field.
I also have 8 - 10 SVG charts which I have linked to reports. About 6 of them display the same report using different parameters. Again, I would like THAT report to have the same current tab as the source chart (chart clicked on to invoke the report).

Dynamically Set date not changing in schedule Job

Hi,
I have created a report with "Order Date" as one of the parameters on the selection screen. I have created a variant, say 'X' , to set this date parameter dynamiccaly as "Current date - 31 days".
I have scheduled this program to run in background with the 'X' variant daily at certain time.
Now, for the day on which I created this job , the Order Date is set to correct date . For ex if I am scheduling the job tdy it will be set to 06/10/08. However, for next day , that is tom this date is not getting changed. i.e Tommorrow again Order date is 06/10/08 but it should have been 07/10/08.
So basically this dynamically set date is not chaning in the scheduled job.
Any idea why this is happening and what is the corrective measure for this.
Thanks!

There is an INITIALIZATION event in the program.......
Do the processing your date in that event only....
for ex....
select-options: date for order-date.
INITIALIZATION.
date-low = sy-datum or wat ever.
Thanks
Saurabh

Dynamically Set Subreport Background Color to the Same Value as Main Report Background Color

I have a report that contains a subreport. The main report has groupings in it. I am dynamically setting the background color of the group rows based on an expression. That part is working fine. The problem that I am having is that
I don't know how to get the subreport to "inherit" the background color of the grouping that holds it.
Basically, I have different row shadings on my report differentiating the groupings except for the rows where the subreport shows.
How do I go about setting the subreport background color to equal it's contaiing grouping's background color? Thanks in advance for any and all assistance provided.

The parameter method given by gpshukla will send the info to the subreport, but you don't need the color parameter in the main report, only the subreport. The trick is in setting the value of that parameter.
Right-click the cell with the embedded subreport, you can select subreport properties.
Select Parameters and add a parameter.
The name column is the name of the parameter in the subreport (color) and value is the value to set it to.
Set name to "color" (no quotes).
Set Value to the same expression used to set the background color for the row.
In the subreport, click the design surface to select the report (not header or footer).
In the properties pane, select background color and choose expression from the dropdown.
Type =Parameters!color.Value into the expression builder.
This will work assuming that background color in the main report row will not change without also refreshing the subreport.
"You will find a fortune, though it will not be the one you seek." -
Blind Seer, O Brother Where Art Thou
Please Mark posts as answers or helpful so that others may find the fortune they seek.

Dynamically set maximum row count in Interactive Report

Hi,
Has anyone worked out a way of dynamically setting (e.g. via select list) the maximum row count value for an Interactive Report, taking into account issues with order by when the report is filtered. I'm aware of solutions like this: http://www.talkapex.com/2010/10/apex-reports-no-limit-downloads.html but as far as I can tell this doesn't work when the report is filtered and the IR is rewritten in the background. Data sets then become unreliable because they are reordered.
Thanks,
Mike

Hi Mike,
You can do that with javascript
gReport.search('SEARCH',100)the 100 you can replace for any number you like.I have a report with filter,sorting and groups and it is gives no problem there.
any number means any number but not higher than the number you set at Maximum Rows Per Page.
You probably can mix the solution from Martin and the above code.
Regards,
Kees Vlek
<tt>Company: http://www.orcado.nl
Blog: http://www.orcado.nl/blog/blogger/listings/69-kvlek
Twitter: http://www.twitter.com/skier66</tt>
If the question is answered please change it to answered and mark the appropriate post as correct/helpfull.
Edited by: kvlek on 24-apr-2013 12:29
Edited by: kvlek on 24-apr-2013 12:35

How to dynamically set the name of the generated PDF file sent by email

Hello,
I am using Reports 10g and I managed to send PDF reports by email, specifying the recipient, subject, format etc, using the reports servlet URL.
But there is one thing that I cannot find a way to do: I want to dynamically set the name of the attached file. It defaults to the name of the RDF file (eg monthly_sales.pdf). I would like it to be something more meaningful (eg monthly_sales_072010.pdf, where 072010 is the month and year passed by parameters).
Is it possible to do it?
Thanks
Luis

Use System.load(...) instead of System.loadLibrary(...).

XSL-FO Report Query / Named Layout - Dynamically set the output filename

Does anyone know if it is possible to dynamically set the name of the PDF file which is created via FOP?
Thanks
Paul

John
Thanks for the quick reply, apologies, I should have been more explicit.
I am calling apache FOP via a report query and a named column layout using xsl-fo to format the PDF report.
The call is done via a javascript function which determines which report to print and then submits the approproate REQUEST. The request is picked up by conditional branches and calls the PRINT_REPORT
The PRINT_REPORT names the PDF file as same as the report query name.
BTW the long term goal is to store the resultant output as a blob back in the database but I can put that off to phase II of the project as I'm not sure that this is possible. Would be nice though!
Thanks
Paul

How do you dynamically set the flat file name

Within my process flow I call a mapping. Within this mapping I have a flat file operator (which creates and writes to a .csv file). All working great.
From this process flow I want to be able to pass a parameter to the mapping (which I can do), and use the value of this parameter as the file name of the .csv file. But I can’t seem to be able to dynamically set the ‘Default physical file name’ to this parameter value within the mapping.
Does anyone have any ideas?
Thanks
Ansel

Hi Ansel
Check out the blog entry here;
http://blogs.oracle.com/warehousebuilder/newsItems/viewFullItem$154
You can use an expression.
Cheers
David

Content-Disposition - Dynamically set in Mail Adapter

Hi All,
I need to dynamically set the Content-Disposition in the receiver mail adapter so as to facilitate dynamic names for my attachment in the mail.
In case i use messagetransform bean, I will have to hard code the name as part of the parameter value in the adapter.
Is there any way i can utilize the ASMA and dynamic configuration here?
The specified item was not found. - i referred the blog but instead of setting the
attachmentXML.setName(mailFileName);
attachmentXML.setContentType("text/xml");
attachmentXML.setContent(by);
I need to set the content disposition. Is there any way?
Appreciate all help on this issue.
Regards,
Shabz

Hi Vijay,
Do have the solution for this? I also have the same requirement.
Please forward me the solution.
Thanks,
Nat

Dynamically set "mailto:" upon submit

Similar Messages

Maybe you are looking for