Dynamics 2015 Installation error SetupServer.exe is not a valid Win32.exe application

My enviroment:
Hyper V virtual server
Windows Server 2008 R2 w/ SP1 running on a domain
IIS installed
SQL 2008 installed
8GB memory on Quad core i7
I extracted the installation files from the ISO and copied them to a local directory on the server. Right clicked on setupserver.exe and ran as administrator and I get the following error:
SetupServer.exe is not a valid Win32.exe application
I tested the same setup files on the Hyper V server and received no errors.
Any advise most appreciated.

Windows Server 2012 and SQL Server 2012 are the minimum requirements for 2015:
http://technet.microsoft.com/en-us/library/hh699671.aspx
Probably causing you an issue or two.

Similar Messages

Error Message ABC is not a valid Windows 32 application

I have an error message “ABC is not a valid Windows 32 application even the games are not working properly. This always occurs when open a file or program. Please suggest way to manage it. My systems configurations are Windows 7, 1GHz 32 Bit processor, 1
GB RAM.
Help required.

If this occurs for a certain executable, this indicates a corruption of the file, redownload or reinstall it. Perform a chkdsk.
If this occurs on multiple executables,causes might include disk corruption/failure, memory corruption, malware infection,...
Check if the issue also occurs in safe mode. http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7
Run chkdks on the affected drive(s) ,run antivirus/antimalware and do (from an elevated prompt) sfc /scannow to scan for and repair system files.
MCP/MCSA/MCTS/MCITP

Installation error 1325 Templates is not a valid short name

Installing the latest XE on Windows 2000 with 1 GB of RAM. I get the message 'Error 1325 Templates is not a valid short file name'. (I'm installing as administrator by the way.)
I've checked the forum and found one hit for this problem. I have been over to Microsoft.com (http://support.microsoft.com/?kbid=328162) and got the download for the installer clean up utility.
When I run this utility, I do not get an option to clean up Oracle XE anywhere - so I cannot proceed any further with the install.
I have had a previous version of XE installed, but I received a few errors during running of the scripts so I had to manually run the failed scripts and all was well. Unfortunately, I have had to remove it (it killed the PC as I only had 256 MB of RAM back then) but now I cannot re-install.
Anyone got any ideas about how I can get past this error please?
Thanks,
Norman.

I have finally found the solution. The problem affected all subsequent installations of any app using an MSI installer.
The registry entry for HKEY_CURRENT_USER\software\microsoft\windows\currentversion\explorer\UserShellFolders\Templates was defined as %USERPROFILE%\Templates with a type of REG_SZ. Unfortunately, because of the %USERPROFILE% part, it should have been a REG_EXPAND_SZ to get the expansion of the environment variable.
Using REGEDT32 (Regedit doesn't allow the type to be specifically chosen) navigate to the above location and note down the Template setting. Delete the Template value. (Edit->Delete when Templates is highlighted.
Now Edit->Add Value.
Enter Templates as the name.
Choose a Type of 'REG_EXPAND_SZ'
Click OK.
Type in the value you noted down earlier, probably %USERPROFILE%\Templates
Click OK.
Check it and exit from the regedt32 app.
Now, double click on the OracleXE.exe file to install it. You do not need to be an administrator to do this.
If you do try to install as an administrator, you will have to redo all of the above because you only changed it for your own login.
Trying to Shift+Right-Click and Run as to install as an administrator will continue to give you the same error that I originally reported.
I suspect that another method of changing the registery is simply to change the %USERPROFILE% part of the original REG_SZ entry to the fully expanded path to something like c:\documents and settings\username\.
Have fun.
Cheers,
Norman.

When i try to install Firefox 4 on my 64 bit Windows 7 Ultimate, error that it is not a valid win32 application

When I downloaded the Firefox 4 installer and tried to install the software, an error message appeared that the application was not a valid win32 application. have deleted the file, re-downloaded it but with same effect. Therefore I cannot install Firefox 4
I have Windows 7 Ultimate 64 bit, 4 GB internal memory,
Intel i7 processor. language English

It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.
Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See "Disable virus scanning in Firefox preferences - Windows"
* http://kb.mozillazine.org/Unable_to_save_or_download_files

Error message " filename is not a valid Win32 application"

I have StarOffice 8 update 11 on a PC running Windows XP. Every time I try to open any StarOffice file from my file manager, I get the error " <filename> is not a valid Win32 application." But I can open the file fine when I do it from within StarOffice, or straight from my email. I cannot figure out how to fix this so that I can launch a StarOffice file from my file manager. Any advice you can give would be greatly appreciated!
Thanks!

You can look for / identify missing or corrupted Operating System files by running the System File Checker Utility.
Type sfc /scannow in the Run window, and press Enter.
Also, a similar issue in OpenOffice was discussed here:
http://www.oooforum.org/forum/viewtopic.phtml?t=11195&highlight=open+pps+explorer

When trying to open documents, getting error as File is not a valid Win32 application

Hi,
I am trying to open a MPP by clicking on the name of the file. But I am getting the error as "path\filename.mpp is not a valid Wind32 application".
I am able to save the document and open it in MPP, but clicking on the document name is giving this error "File is not a valid Win32 application".
I have tried to repair "Microsoft Project". But still the same issue. I am using Office 2010. SharePoint site is SP 2010.
How to fix this?
Thanks

Hi Ed,
I am sorry, but I could not understand that answer.
I have put that answer in the below quotes:
"You are never going to believe what I did. This is a nice ending to a very confusing situation. lol
I uninstalled Project 2007 and rebooted my laptop and reinstalled Project 2007. No Difference at all. Same thing happened. I just couldn't stop thinking about how 2007 Microsoft Office Component kept showing up in default programs. This has bugged me for days.
I went browsing in my program files. I typed in Microsoft Office Project. The only thing I found was WINPROJ. I decided to check it out. I checked it's properties, size, location, etc.. What did I have to lose at this point? I clicked on it and it went into
my default programs as Microsoft Office Project 2007. This doesn't make any sense to me. But, don't try to fix anything else if it isn't broken, right? It's working and I am so relieved. I mean, YAAAAY!!! Another mystery solved...
Thanks for hanging in there with me to help solve this mystery. You have been of great assistance to me. You made me think outside the box and it worked.
Laura"
Does it mean MPP Should be a 2007 version?
Thanks

Error message, Firefox is not a valid Win32 application. Cannot upgrade o Firefox 6.0

Have downloaded Firefox 6.0 but cannot execute as it is not a valid Win32 Application.

You can look for / identify missing or corrupted Operating System files by running the System File Checker Utility.
Type sfc /scannow in the Run window, and press Enter.
Also, a similar issue in OpenOffice was discussed here:
http://www.oooforum.org/forum/viewtopic.phtml?t=11195&highlight=open+pps+explorer

I have Win7 but I get this message at set up of iTunes 10 "iTunes64setup is not a valid Win32 bit application" I tried an earlier version of iTunes but it said to DL the latest 64bit version What can I do?

New Win7 computer, first install of iTunes.

In the course of your troubleshooting to date have you worked through the following document?
iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application"

Scanstate.exe from USMT 5.0 from Windows 8.1 ADK fails on Windows XP with "%1 is not a valid Win32 application"

We started to test our Windows XP SP3 (32-bit) to Windows 7 migration zero-touch task sequence in ConfigMgr 2012 R2 and we can't get past the following error from the "Capture User State" step running on XP...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The task sequence execution engine failed executing the action (Capture User State) in the group (Capture Files and Settings) with the error code 2147942593
Action output: ... params successful
Building USMT command successful
Successfully connected to "\\JHQCM01.jhq.net\SMPSTOREE_FB121F31$\A1ADF87C012E6998B5753B112299BEE4F8868207FAE3D75671798DF6A7DD1A33"
Executing command line: "C:\_SMSTaskSequence\Packages\JHQ0004E\x86\scanstate.exe" "\\JHQCM01.jhq.net\SMPSTOREE_FB121F31$\A1ADF87C012E6998B5753B112299BEE4F8868207FAE3D75671798DF6A7DD1A33"
/o /localonly /encrypt /keyfile:*** /efs:copyraw /v:5 /vsc /l:"C:\WINDOWS\CCM\Logs\SMSTSLog\scanstate.log" /progress:"C:\WINDOWS\CCMLogs\SMSTSLog\scanstateprogress.log" /i:"C:\_SMSTaskSequence\Packages\JHQ0004E\x86\MigApp.xml"
/i:"C:\_SMSTaskSequence\Packages\JHQ0004E\x86\MigDocs.xml" /i:"C:\_SMSTaskSequence\Packages\JHQ0004E\x86\MigExclusions.xml" /uel:90 /ue:VM0142511382\* /configC:\_SMSTaskSequence\Packages\JHQ0004E\config.xml
Invoking ReleaseSource on USMTPackagePath C:\_SMSTaskSequence\Packages\JHQ0004E
OSDMigrateUserState finished: 0x800700c1
CreateProcess failed. Code(0x800700C1)
Command line execution failed (800700C1). The operating system reported error 2147942593: %1 is not a valid Win32 application.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
To troubleshoot, we tried running the x86 version of scanstate.exe (from USMT from the Windows 8.1 ADK) manually by just double clicking on it on a few Windows XP SP3 systems and we get a similar error as seen below...
So, we thought maybe USMT from our Windows 8.1 ADK install maybe somehow corrupt, but downloading and installing it again results in the same error, so it does not seem to be a file corruption issue. The x64 version of scanstate.exe works
fine on 64-bit OS's, its just Windows XP SP3 (32-bit) we are seeing this error.
Has anyone successfully using scanstate.exe from USMT 5.0 from the Windows 8.1 ADK successfully to capture user state from a Windows XP SP3 (32-bit) system?
Regards,
JJ

Windows 8.1 ADK comes with a newer version of USMT (NOT 5.0) and crashes. I learned this today the hard way. I hope Windows 8.0 ADK's loadstate.exe works for restoring to a 8.1 machine.
Yesterday i used Windows Easy Transfer to move from XP to 7, and then re-did the backup in 7 so it would be compatible with 8.1, and it only restores files, not settings.
So i will test USMT 5.0 in this same scenario, because i have 30 machines to change to newer machines with 8.1

"adobe .ai or .eps file" is not a valid Win32 application

I'm on Windows XP and can't open Illustrator .AI or .EPS files by double clicking them. When I do I get the error "...is not a valid Win32 application". I must go to file>open or drag the file icon to the AI icon. I checked some other threads, but had no luck. I did try going to control panel>folder options>file types>opens with. But that did not work. Photoshop and Acrobat files open fine when I double click them.
thanks

As I wrote many times, the best cure in such situations is to entirely delete any existing references to a file type or program from that list, then create the rules again from scratch. Nothing as refreshing as starting with a clean slate. In addition, check, whether other programs are having a hold on certain associations and/or are simply flooding your context menu with nonsense stuiff. Tools such as Nero burning software, various packer tools and a colorful array of other software have the bad habit of doing that...
Mylenium

I have switched offices and computer. may I still access my old tunes? next, I get an error when trying to download Itunes to my new compuet: c:\DocumentsandSettings\aabugattas\desktop\itunessetup.exe is not a valid Win32 application How can i download i

I have switched offices and computer. may I still access my old tunes? next, I get an error when trying to download Itunes to my new compuet: c:\DocumentsandSettings\aabugattas\desktop\itunessetup.exe is not a valid Win32 application How can i download it?

In the course of your troubleshooting to date have you worked through the following document?
iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application"

Error 'RecoveryMgr.exe is not a valid Win32 application' when trying to restore in Win7

I really hope someone can help as this is driving me mad!
System details - G62 Notebook running Windows 7
The notebook crashed after a Windows update and wouldn't boot up. I made it into the recovery manager and back my files before restoring to factory settings.
Since getting back in I am unable to get my files back. I have tried through the recovery manager but it does not allow me to see the files on the dvd. I have also tried through backup and restore but no joy there either. When I click on RecoverMgr.exe on the dvd I get error 'RecoveryMgr.exe is not a valid Win32 application' and it won't open.
I hope someone has managed to solve this before as I would love my files back. All suggestions greatly appreciated and thanks in advance.

Thanks Mumbodog. Unfortunately I have tried and the files won't copy. Starting to think they are corrupt! Have tried on a few different PC's but no luck. Really annoyed Any other suggestions?

Sqlplus.exe is not a valid win32 application error

Hi All,
I have installed oracle 10gr2 on windows xp.
if i type sqlplus in command prompt i get this error
"C:\oracle\product\10.2.0\db_1\BIN\sqlplus.exe is not a valid win32 application".
i went to the path where sqlplus is present i observed that sqlplus.exe file was 0KB.
how can i resolve this problem. i want to upgrade oracle 9i to 10g so i need sqlplus of 10g to work properly.
please anyone help me out to solve this problem.
Regards,
Veeresh S

You'd have to find out how and why that file became 0KB in size.
If one file is 0KB in size, what assurance do you have that other files aren't
also corrupted ?
It could have been a virus-scanner wrongly attempting to quarantine the file,
it could have been a backup-restore session that copied the file back as 0KB,
it could have been some command that you executed in attempting the upgrade.

Error message "play.exe is not a valid Win32 application"

when I click the play.exe file I get a error "play.exe is not a valid Win32 application" please can I have some help understanding why the player wont op

some information would help understanding the issue-
which operating system you are working on?
which version of UPK was used to create this play.exe?
does it work on other similar machines?
-SD

TS3212 When I try to update my Itunes I get an error itunes setup exe not a valid Win 32 application. I have a new phone and I cannot register or sync until I upgrade Itunes. Any suggestions.

I cannot get my Itunes updated to the 10. that is required for my new Iphone. The error is itunes setup exe not a valid Win32 application.
Can someone please help me out, I really need to get this phone up and working.

In the course of your troubleshooting to date have you worked through the following document?
iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application"

Dynamics 2015 Installation error SetupServer.exe is not a valid Win32.exe application

Similar Messages

Maybe you are looking for