DynamicSiteName not all updating

Site 1: Datacenter Site: 2 (Office)2 RODC's. One acting as
DNS and DHCP
Primary DC servers
Site 3: 2 RODC Acting as DNS and DHCP for that site
The three sites are on different subnets. All servers are Windows 2K12 R2. Firewalls rule and ports where there is communication between the DC's and RODC's. Replication is happening without issue. Sites have been configured for each
of the the respective DC's and RODC's to their subnet.
So here's the issue: When users are connected from Site 2 or Site 3, it changes the DynamicSiteName to that specific site. So I know my sites and services are configured properly. The problem is that when they logon to the VPN, the DynamicSiteName
registry changes to Site 1 and when they disconnect from VPN, theDynamicSiteName registry does not change back to whatever site that they are currently getting IP from. Therefore, when they lock or logon to their workstations it takes a really long time
because it's trying to look for a DC to authenticate. It eventually logs on with cache credentials because it could not authenticate to the RODC on for that site.
To further add to the issue. I know that this is only happening to half of my population of workstations. I suspect when our workstations were originally joined to the domain they were joined over the VPN. Not
sure if this cause some hardcoding of the dynamicsitename registry entry. I could not repeat this issue if I joined the workstations from an IP on the site.

> logon to the VPN, the DynamicSiteName registry changes to Site 1 and
> when they disconnect from VPN, theDynamicSiteName registry does not
Review the netlogon.log on your DCs for messages about clients without a
site.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Similar Messages

Some (not all) updates to playlist show up on mini

I created a new playlist and a new smart playlist in itunes, that doesn't show up on my ipod... I also deleted the on-the-go playlist, and that still shows up on the ipod, so theres obviously a problem w/ the updating. But I've also added new songs on an existing playlists, and they are showing up on the ipod, so not all updates are being affected. Any ideas? Should I reset?

Yeah, try to reset
Press and hold the MENU and CENTER buttons at the same time until you see the Apple logo on your screen, then release those buttons. Try to do this while your iPod is plugged into your computer. Do you have your iPod set to manually or automatically update itself? For example, mine updates automatically..as soon as I plug it in my iPod automatically updates all my new songs without me clicking on anything.

Microsoft Service Pack 2 - not all versions are equal; how to update to the latest one "safe

I posted this under another topic where it was relevant, but thought the instructions I got from Microsoft were useful (as was my experience in using them as I sent back a reply to them with the problems I encountered [none of which were particularly bad]):
One important point to note is that not all Windows XP SP2 upgrades are equal.
I had a different issue and spoke to Microsoft, who advised me to uninstall the version of SP2 I had and reinstall the newest version (the old version was about 70mb, the new one nearly 250mb).
Apparently the old SP2 had quite a few problems with it; I've found the new one to be "simply stress free" since installing...
The SP2 file name I installed (ie the newest at the time I did it) was "windowsxp-kb835935-sp2-enu".
Here's their instructions - I disagree with the way round that they suggested downloading the update (ie I would strongly advise downloading the update and having it sitting on your desktop before doing anything!!! - please see my feedback email to them that follows (you will note that I had problems connecting to the internet after uninstalling the earlier version; this, combined with the fact that I could barely read what was on the screen would have given me a major inconvenience had I not done this)!!! (and don't blame me if it goes horribly wrong - it's also worth double-checking that the version of SP2 the email links to is the most up to date. I've had a quick check myself, and it does indeed appear to still be the most up to date):
MICROSOFT'S EMAIL (make sure you also read my reply below):
MESSAGE:****************************************** ****************************This is an email from Microsoft about your support incident.When replying to this address: + It helps us if you do not include the original message + Please keep the case number (SRxxxx) in the subject lineThank youMicrosoft Product Support Services ******************* The message from Microsoft follows ****************Hi Gregory,Firstly uninstall SP2 by going to Start>Control Panel>Add/Remove Programs and then reinstall it in a clean boot.. Click Start >> Run >> In the run dialog box type msconfig and then click ok 2. Put a dot in selecti've startup 3. Uncheck all of the check boxes that become available except Process System.ini file and Load system services 4. Go to the Services tab along the top, click Hide all Microsoft Services 5. Then disable any remaining services 6. Click apply and then close 7. Finally select yes, this will start in a clean boot. 8. Then go to (http://www.microsoft.com/downloads/d...DisplayLang=en) and download and install Service Pack 29. To return your PC to normal, open the System Configuration Utility, click "Normal Startup", click OK and restart. Then restart your computer and try accessing updates againPlease let me know the results of these methods, particularly if there were any steps that you were unable to complete successfully.
MY REPLY:
HiI successfully carried out the installation on Saturday.A few minor problems ensued (the second one may have cause a novice user real problems! Certainly caused me some concern whilst working through it!). I had to reinstall ATI drivers from scratch (for Radeon 9800 Pro); this was however the only set of drivers that appeared to "detach" itself. The main problem here was that instead of using the usual standard VGA driver (which it does when I uninstall it once a month to install updated drivers), it used some other driver that made the screen very difficult to see (especially on blue backgrounds!). Running ATI's total uninstall program sorted this out however, and fortunately I had the last update package from ATI still on my system. After uninstalling and reinstalling there appeared to be no further video problems.2. After installing SP2 (and before installing above), whilst I was in the process of getting everything up and running (eg installing the security updates) the system randomly froze about 4 or 5 times; the only way to sort this out was to use the power button. I traced this problem to Windows changing my wireless networking settings so that it handled everything; I have a Netgear adaptor the software for which usually controls this (Netgear Smart Wizard). Basically the two were trying to do the same task and causing crashes; on switching Windows management off, things settled down (the Netgear driver did not need to be reinstalled).3. As a minor point, after the upgrade and installing all other updates, I noted that Microsoft Update was no longer running; I had to reinstall it from Windows Update and the messages I got whilst installing suggested that it was still partially installed but that there were problems with it. It now works.4. As a final minor point, I attach the Scan log from Registry Mechanic which I ran after everything was up and running; it fixed various problems within the registry. I note that the majority of errors are inconsequential, but note that a few do relate to the various Microsoft installs; maybe the installer program for SP2/ Media Player 0 need to sort these out in future releases? Don't think they're a real problem though!The instructions supplied worked fine; one thing I would suggest is that users are instructed to download the SP2 upgrade pack to their desktop prior to uninstalling the original SP2; I believe that my internet connection problems started after I had uninstalled the original SP2 which may have caused problems downloading the new SP2. It also ensures that the download is successful (eg if the site was down for maintenance); I was advised whilst uninstalling SP2 that about 20 programs/drivers would not work properly after the uninstall and so the immediate reinstall was vital!One thing that seemed to fix after reinstalling was a problem I was having installing Media Player 0; after installing it previously, every time I checked for updates on it the whole program would reinstall. Now however this has fixed. I will let you know if I encounter any further problems, but things all seem to be fine now, touch wood.....!
Hope this helps!Message Edited by gjc26 on 0-27-2006 02:50 AM

One small thing - I believe the reason why some of my drivers were messing up was because they were SP2 specific; the older drivers and the ones that were compatible with both SP and 2 were fine.
As soon as I did the reinstall, all of the drivers/programs that were not working, worked (aside from the ones that I mentioned in my attached email above).
So, if after uninstalling the old SP2 you are told that loads of drivers/programs will not work, fear not - most should fix themselves upon installing the new SP2.
G

HT1911 I just verified my Apple user ID and password but certain updates won't download (gives me the signal that I'm incorrect). I keep changing it, verifying but not all applications let me proceed.

I just verified my Apple user ID and password but certain updates won't download (gives me the signal that I'm incorrect). I keep changing it, verifying but not all applications let me proceed. So I can't download itunes software updates or update my iphone even though I have just verified my info. I know others that have this problem but can't get support to resolve it.

Hi mpellichero,
Thanks for visiting Apple Support Communities.
The steps in this article can help if you are being asked for the password to your previous Apple ID:
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/TS5223
Best Regards,
Jeremy

I recently got a new iphone 4 w/iOs 7. I set up th eicloud, etc. and got my contacts and appointments from outlook. All was fine. Now it will not snyc/update my phone from outlook. I get "Your setup couldn't be started because of an unexpected error."

I recently got a new iphone 4 w/iOs 7. I set up th eicloud, etc. and got my contacts and appointments from outlook. All was fine. Now it will not snyc/update my phone from outlook. I get "Your setup couldn't be started because of an unexpected error."

Hello JinxUK,
Thank you for the details of the issue you are experiencing with the iCloud Control Panel. I found an article referencing the error message you are getting:
“Your setup couldn't be started because of an unexpected error.”
Apple is investigating this issue. This article will be updated as more information becomes available.
iCloud: iCloud Control Panel setup cannot be started
http://support.apple.com/kb/TS5178
I recommend saving that link so that you can check back for a resolution when it becomes available.
Thank you for using Apple Support Communities.
Best,
Sheila M.

Since I downloaded the firefox update I no longer have the firefox screen and not all my bookmarks will work. Why?

After I downloaded the latest update firefox as I knew it disappeared. The opening screen no longer shows the fox logo. The search box on the toolbar lists as conduit search. And I am finding that not all my bookmarks still work. Example-I have to go to att to access my mail. That is fine if that is the way it is supposed to work but if so I would like to know how to change my home screen--or at least the first thing I see when firefox opens to the att site as I generally use my computer for email. I am also accustomed to using google search and as I am a crazy old cat lady I am not really ready to change the way I am familiar with my computer.
Ideally, could I get the fox picture screen with the google search and the ability to click on the bookmark labeled mail back on my computer???
I am not computer literate unless it acts as it always has. Thanks, Dawn

hello dawn, please be aware that there are malicious websites out there which will trigger fake update notices/popups which try to trick you into downloading software bundled with adware. please never click on such websites or execute such files on offer - updates are handled automatically by firefox and you don't have to download any file for it (you can always manually check if you're up-to-date by going to ''firefox > help > about firefox'').
please try these steps to regain your firefox:
# [[Reset Firefox – easily fix most problems|reset firefox]] (this will keep your bookmarks and passwords)
# afterwards go to firefox > addons > extensions and in case there are still extensions listed there, disable them.
# go to the windows control panel and remove all software recently installed where you don't know which purpose it has or otherwise looks suspicious.
# finally run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] and [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner] to make sure that adware isn't present in other places of your system as well.
[[Troubleshoot Firefox issues caused by malware]]

Songs on the ipod "name of ipod" can not be updated because all of the play

Songs on the ipod "name of ipod" can not be updated because all of the playlist selected for updating no longer exist.
Everytime i try to update my iPod, I keep recieving this message. I have uninstalled and installed repeatly and i am still getting the same message, what can i do so that i can update my iPod.

Have a look at this post by forum member Hudgie: Hudgie - iPod cannot sync because one or more playlist is missing

My iPhone 5c is not being recognized by my mac except to charge it. I'm up to date on all updates and don't know what else to do. I have restarted several times. I have even tried to update my iPhoto and I can't even do that with iPhoto 9.0, but can't.

My Iphone 5c is not being recognized by my Mac computer. I have done all of the upates, restarted several times and I'm not sure what else to do. I have searched and searched and searched and have come up with nothing. Also, my Iphoto can not be updated. I'm still using version 8. something, and it won't update without this update and that update. It needs 9.0 but I can't find that download anywhere. The only one that I can find is 9.1. That won't update. Is there anything that I can do, or should I just bite it and take it to apple to get looked at?

Does iTunes not see the phone?
If not, make sure you're running the current version of iTunes.
If you are running the current version and it still doesn't recognize it, see this: http://support.apple.com/kb/TS1591?viewlocale=en_US&locale=en_US
As for iPhoto, you will have to purchase a newer version. It's not a free upgrade. Or, you can use Image Capture, which is built into OS X, to import the photos.

HT4623 I updated to the latest iOS and now YouTube and the Ap store are no longer on my phone. Also, not all my music will play and if I play a song it will actually play a different song while displaying the one I chose. Any ideas how to fix this?

I updated to the latest iOS and now YouTube and the Ap store are no longer on my phone. Also, not all my music will play and if I play a song it will actually play a different song while displaying the one I chose. Any ideas how to fix this?

You have to download the individual youtube app now. It is no longer a nataive ios app from apple in ios6

I updated my iPod Touch to 6.0.1. after much prompting. Now my music is gone! (along with apps, photos and podcasts). After syncing a bunch of times some of it came back, but not all of it. How odd is that? How can I get my music back on it??

I updated my iPod Touch to 6.0.1. -- after much prompting from iTunes. Now my music is GONE (along with apps, photos and podcasts). After syncing a bunch of times some of it came back, but not all of it. How odd is that? How can I get my music back?? I'm really bummed! Everything shows in iTunes, but it's not synching right. So glad I updated. NOT.

Go to iTunea>Preferences>Devices and see if there is a backupright at the time you did the update. Then try restoring from that backup. If the apps are in your iTunes library, any app data will be restored to the iPod.
When restoring from an iOS 4 (or later) backup, if the device had a passcode set, iTunes will ask if you want to set a passcode (and remind you that you had protected your device with a passcode). iTunes will not ask you to set a passcode when restoring from iOS 3.x and prior backups.
Therefore, remembe the passcode that you enter this time.
It appears that if you restore from a backup, that backup is not subseqyently overwritten by the next backup.

Second day after updating to iOS 6 on my iPhone 4, my contacts have duplicated. Probably not all but many, and my contacts already numbered in the thousands. Please tell me there is an easy fix to this problem!! I already had to go through contact-by-co

Second day after updating to iOS 6 on my iPhone 4, my contacts have duplicated. Probably not all but many, and my contacts already numbered in the thousands.
Please tell me there is an easy fix to this problem!! I already had to go through contact-by-contact when I bought this phone and added contacts from my Blackberry and MS Outlook on the phone. Many duplicated at that time and Apple said the only fix was to go through each one and decide to keep or delete. I really don't want to do that again!

I had this problem while I had iOS 5.1.1 installed for many months. Fortunately I only have about 150 contacts and only about half of them duplicated. I found that my problem was the way thing were set up in Outlook. I removed all of the duplicates and corrected everything in Outlook contacts (ignoring the address book) and have not had the problem since, Hope this helps.

When i try to download itunes and other things it says my ios is out of date how do i update i have updated all updates but still will not let me dowload some application this is an old mac book and firt time i have used it please help

i have got an old mac book from a relative but i dont know how to upgrade to a later operating system.
i have installed the updates but it keeps coming up i need a more up to date operating sytem ios6??
pleasehelp

Your old MacBook series, built between 2006 and 2010, had several
different verions within those years and they do not all accept a later
upgrade to the most newest OS X versions...
These shipped with (early) intel-version Tiger OS X 10.4.x through
Leopard 10.5.x, and early models can use Snow Leopard 10.6.8,
& some can run as late as Lion 10.7.5; or maybe Mavericks 10.9.2.
Hardware limits and system configuration specs determine this.
A supported computer may also need hardware upgrade (RAM)
to run a later OS X system version along with newer software.
•How to identify MacBook models:
http://support.apple.com/kb/ht1635
•Apple MacBook Specs (ALL MacBook Technical Specs) - everymac.com:
http://www.everymac.com/systems/apple/macbook/index-macbook.html
The base system upgrade for earliest MacBook 1.1 & MB2.1 past
the original as-shipped Leopard 10.5.x, would be Snow Leopard
10.6 (w/ Combo update to 10.6.8 v.1.1) for Snow Leopard download.
So your MacBook likely has either Leopard or Snow Leopard. If it has
Snow Leopard 10.6.8 installed/updated to last step, then it may be
able to go to the online Mac App Store, App Store, iTunes Store, etc.
You can see if an applicable upgrade past the current OS X system
is available from the Mac App Store. If yours is MacBook1.1 (early)
then highest it may go is Snow Leopard 10.6.8. The later MB2.1
has limited upgrade, and could use Lion OS X 10.7.5 at most.
More recent builds of MacBook, toward the last model year 2010,
can take as new an upgrade as Mavericks OS X 10.9.2. This is
based on build version specs, hardware limitation, and so on.
•Mac OS X - Upgrade - Apple Support:
http://www.apple.com/support/osx/upgrade/
In order to know more about the possibilities, you'd have to supply
more information on your exact MacBook model build year etc.
The "About this Mac" as found under the Apple menu icon  is of
some help. Additional info from "More Info" in the next window can
help when System Profiler appears. The hardware specs are there.
Good luck
edited 3x

My apps are not being updated when pressing the update all button. It just says installing and no update is being done., my apps are not being updated when pressing the update all button. It just says installing and no update is being done.

my apps are not being updated when pressing the update all button. It just says installing and no update is being done., my apps are not being updated when pressing the update all button. It just says installing and no update is being done.

Must be serious because you have stated the problem 4 times now.
Here are a number of things that you can try and maybe one of them will help.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.
You can also try going to the App Store, find an app that needs an update, tap on the app icon to bring up the description page, then tap on install that way, rather than using the Update option from the app updates screen.
And ... You can always install the updates in iTunes on your computer and then sync them to the iPad.

My iTunes password will update some of my Apps on iPad but not all of them. When I try to update the remaining ones, my password expires. I've just created 5th PW. Does anyone else experience this?

My iTunes password will update some of my Apps but not all of them. When I try to update the remaining ones, my password expires. I've just created 5th PW. Does anyone else experience this?

- Try going to Setings>Store and sign out of the account and then sign back in.
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears

I have a library of nearly 2000 songs and all of which were purchased/downloaded in their entirety. It seems that after one of the iTunes updates- many (not all, but plenty) of those songs were "cut off" after playing about 2/3 through them- I haven't gon

I have a library of nearly 2000 songs and all of which were purchased/downloaded in their entirety. It seems that after one of the iTunes updates… many (not all, but plenty) of those songs were “cut off” after playing about 2/3 through them… I haven’t gone through the entire library to see which are complete and which were cut off, but hoped this is “known problem” and hopefully with a known “fix”… Make sense?
Please advise…
Thx,
Johnny

I have a library of nearly 2000 songs and all of which were purchased/downloaded in their entirety. It seems that after one of the iTunes updates… many (not all, but plenty) of those songs were “cut off” after playing about 2/3 through them… I haven’t gone through the entire library to see which are complete and which were cut off, but hoped this is “known problem” and hopefully with a known “fix”… Make sense?
Please advise…
Thx,
Johnny

DynamicSiteName not all updating

Similar Messages

Maybe you are looking for