DynDNS Invalid Host Name

I've set up an account with DynDNS. I've used their service in the past so I'm not entirely new to it. For the life of me, I cannot get my e2500 to update with DynDNS. The error I get back is "Invalid Host Name". I've put my fully qualified domain name in the field that reads "Host Name".
I have a sneaking suspicion that DynDNS is not working because the drop-down in the web interface reads "DynDNS.org". DynDNS.org redirects to dyndns.com.
For now, I think I will have to run a dyndns client on one of my computers. If anyone knows a solution, it would be much appreciated.
Thanks.
-Nate

I don't think it is not working because the drop down in the web interface reads " Dyndns.org ". You will find same option of Dyndns.org on all Linksys routers.
Enter your host name. This should be in the format of name.dyndns.org.
Run the dyndns on one of your computers and check if the host name is working.
If it is working then you can try to reset the router to factory default and reconfigure it.

Similar Messages

Active Message When you have invalid host name in Proxy Server

I have an issue with one of our customers.
To communicate with any external parties, we have to define the host name in proxy server(Firewall).
I noticed that when we configure a WCF or HTTP adapter with an invalid host name of https url address, the messages remain active.
I am using ESB Toolkit in my implementation but I reproduced same issue using Orchestration with static port and dynamic port.
I traced the message using Fiddler and I noticed that we only have one hit with Status Code 407(407 proxy authentication required) and it is not retrying which is not a risk to my implementation. However, I consumed a web service using a console application
and I set an invalid host name for url but I noticed there are two hits in Fiddler one is 200 http status code and the second hit 407 http status code and I could catch the exception.
The question is: How to enforce BizTalk to suspend these messages or how to handle these messages?
Note that I did the followings trials but no lucks:
- I updated retry count to zero
- Delivery Notification of the Port is Transmitted
- updated closeTimeout, sendTimeout, openTimeout values
Thanks in Advance
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer

Hi Mohan,
You are getting "The remote name could not be resolved" because you are not using Proxy.
I tried to tweak on Retry Count(tried zero,1,2...). I am sure it is not retrying because there is not any network hits or packets in Fiddler or WireShark and messages stay forever.
ESB is not my issue because I reproduced same issue with a simple orchestration consuming a service with a static send port.
I have the following notes:
- In console application and Biztalk application using WireShark I can see same number and types of network packets in both cases.
- I tried to change https url to http with incorrect host name in this time retrying is working and message suspended after exceeding retry count.
- I tried to use https which is the required one with correct host name and change service name, I could see client OK Hello and server OK Hello and retying working fine and message suspended after that.
I think the issue with handshaking with proxy server because I could not see client Ok and Server ok hello when changing the host name.
There is another thread talking about an issue with active message and handshake.
https://social.technet.microsoft.com/Forums/en-US/736f0f72-ccc9-4a84-802a-7a1ff788a04a/ssl-2way-cert-incident-remains-active?forum=biztalkgeneral
But the question remains open that how we can handle this active message and why BizTalk not throwing an error?
Thanks,
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer

Host name is invalid

I have gone through the setup of my newly installed lion server software. I setup a server.example.private host name and have turned on file sharing, and VPN. I bought the server software so I can access my host computer from my IPad and a windows based laptop. When I attempt to setup the profile manager I get to the screen in the directory admin setup that asks for the host name and password, etc. The name and host name are already populated with a generic names and the password fields are blank. Whether I leave the generic fields blank and try and enter a new password or change the generic fields and password to something new I get the same error message every time. It says "Computers host name is invalid. The host name does not resolve to any configured address on this comp. Please ensure the host name is correct. How do I find out what the correct host name is for my computer? Thanks in advance.

First the difference in names. .local is the bonjour address. Your .private is a DNS address. While .local can be used for both, it is highly discouraged.
So in Server Admin > DNS, you want to be on the Zones tab. In here you will want to do the following:
Prep: Let's assume you want to define your system as host name server, domain name myfamily.private. So the fully qualified name is server.myfamily.private. Change the examples below to match your needs.
1: Click on Add Zone and select Add Primary Zone (Master)
2: In the Primary Zone name, enter myfamily.private
3: In the Nameservers box click the + button.
4: An entry will appear. The zone colume should read myfamily.private and the Nameserver Hostname will likely grab your Bonjour name and enter <bonjour_name>.myfamily.private. (Please not many items in DNS end in . This is really important do not remove them. If you need to, override the <bonjour_name> and enter server in its place. This way, the Nameserver Hostname colume should say server.myfamily.private.
5: You can Save at this point if you want
6: Now, click on the Add Record button and choose Add Machine (A)
7: When the panel appears enter the following:
         Machine name: server.myfamily.private.
          IP Address: enter your fixed IP address of the server - this can be found in System Prefs > Network and should be the IP address assigned to the Ethernet port. For illustration, lets assume it is 10.0.0.10
8: Click save
9: If you are paying attention, you will note that a second zone file was created automatically for the reverse zone, It will have a name of 0.0.10.in-addr.arpa. This is the reverse zone file and contains number to name mapping (where the primary zone is name to number).
Now you have two valid zone files. Check your work by doing the following:
1: Open Terminal
2: Enter this command:
     nslookup server.myfamily.private 10.0.0.10
3: The result should be 10.0.0.10.
4: Now test again with nslookup 10.0.0.10 10.0.0.10
5: This tests the DNS running on the machine to return the proper results to you.
Now, that it is working, go back into System Preferences > Network and make sure the first DNS server address is the address of your server. This way you will talk to your system first for name resolution. But since your systems is SOA for myfamily.private only, nearly all requests will be past to the public DNS servers provided by your ISP.
If you are good to this point, then go back into Server Admin > DNS and remove all those other zone files.
Ok, if you got this far, then reboot the server.
After the reboot, repeat those nslookup commands and make sure you are still resolving as expected.
Now, to check if there is any lingering damage. Since it sounds like you have not configured any/many services, this is a good thing. So enter this command in Terminal and tell me the results:
sudo changeip -checkhostname
Now, you will need to clean up after your server.

Report failed to parse SQL query:ORA-01745: invalid host/bind variable name

Hi,
We are currently upgrading from v2.2.0.00.32 to v4.0.0.00.46.
I have copied the applications onto our test server along with the various database objects and data etc.
When I am running a report in v4, it is failing with the following error: "failed to parse SQL query: ORA-01745: invalid host/bind variable name".
When I copy the SQL that builds the report into TOAD (on out test server) it runs OK so really cant see why it would fail in APEX. It works fine when I run the query in our APEX v2 and in TOAD in our live server.
The query is as follows:
SELECT
aea.ALTERATION_ID
,aea.ALTERATION_ID "ALTERATION_ID_DISPLAY"
,aea.assembly_name "Revised BOM"
,assembly.description "Revised BOM Description"
,assembly.INVENTORY_ITEM_STATUS_CODE "Revised BOM Status"
,aea.BEFORE_CHANGE_QTY
,flv.MEANING "Alteration Type"
,aea.component_name "Part No"
,component.description "Part No Description"
,component.INVENTORY_ITEM_STATUS_CODE "Part No Status"
,aea.AFTER_CHANGE_QTY
,TO_CHAR(aea.last_update_date,'DD-MM-YYYY HH24:MI:SS')"Last Update Date"
,aea.LAST_UPDATE_BY
,aea.COMMENTS
,aea.ORACLE_CHANGE_NOTICE
,AEA.SELECTION_CRITERIA
FROM XXMEL_APEX_ECO_ALTERATIONS aea
, fnd_lookup_values flv
, (SELECT INVENTORY_ITEM_STATUS_CODE
,segment1
,description
FROM mtl_system_items_b
WHERE 1=1
AND organization_id = 26) component
, (SELECT INVENTORY_ITEM_STATUS_CODE
,segment1
,description
FROM mtl_system_items_b
WHERE 1=1
AND organization_id = 26) assembly
WHERE 1=1
AND aea.COMPONENT_NAME = component.segment1 (+)
AND aea.assembly_NAME = assembly.segment1 (+)
AND flv.lookup_code = aea.acd_type
AND aea.eco = :P13_ECO
AND flv.lookup_type = 'ECG_ACTION'
AND modify_flag = 'Y'
ANy help would be great,
Thanks
Chris
Edited by: Cashy on 22-Nov-2010 04:13
Edited by: Cashy on 22-Nov-2010 04:14

For some reason, the updatable fields (this is a updateable report) where not connecting to the database properly. Whn I changed them to a report columns and removed the database field reference, the report rendered

Problem with OAS Instance Name y Host Name to create trial ssl certificate

Hi, everyone
I have a problem when creating a trial ssl certificate from Verisign page, affer a live assistance, that page rejected my CSR generated from OAS, saying thay my common name has invalid characters.
My Oracle Application Server installation name: Instance.HostName is:
IAS_IND01.ind-internet
So, Verisign told me this name can't contain "_" or "-" characters for example.
I need to know if it's possible to change the instance name and if OAS host name changes also if i change server's host name.
I wouldn't like to reinstall all over again.
Please help.
Regards
David

Hi,
No your AS server will not automatic. even if you change your host name.
If U 'll try to change your host name, be carefull when U 'll try to start you AS instacne
it ' not start anymore , AS user hosts fill to get full quallified name of your host.
U 've two choices
-1 delete your AS, then change your hosts name, then new installtion of AS
2- If U 've exprience with AS, just breng your AS down, change your hosts name,
U 'll need to do some changes in your AS, just read admininstrator Guide.
Cheers,
Hamdy

Host name in the getConnection statement.

HI,
I am trying to use JDBC to access Oracle database. I used the following statements to register the driver and get the connection:
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
Connection conn=DriverManager.getConnection("jdbc:oracle:thin:@localhost:1521:test","SYSTEM", "manager");
I have the database called test. I can compile the code correctly, but when I run it, it says "Invalid Oracle URL specified". I am not sure what to use for the host name. I checked the listener.ora, and the port number is 1521. I have the oracle8.1.7 installed on my windows2000, so I believe it is running as a windows service. Can anybody tell me what hostname to use? Thanks a lot.

I tried to add the statement to the init.ora file which is referenced by the inittest.ora file, and the error message changed to the following: (By the way, am I supposed to modify anything in order to use JDBC, or it should be fine after it has been installed?) Thanks.
Exception in thread "main" java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:168)
at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:208)
at oracle.jdbc.ttc7.O3log.receive1st(O3log.java:428)
at oracle.jdbc.ttc7.TTC7Protocol.logon(TTC7Protocol.java:248)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:249)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:36
5)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:260)
at java.sql.DriverManager.getConnection(DriverManager.java:517)
at java.sql.DriverManager.getConnection(DriverManager.java:177)
at JDBCExample.main(JDBCExample.java:10)

550 Access denied - Invalid HELO name

Can someone tell me if this error message is my problem or the recipients? 99% of our email goes through fine, but we now have 3 customers we get this error from. The email was sent from Snow Leopard Server 10.6.5. I did an MX check and MXToolbox reported back my ISP's IP address and not the static IP address of our server.
Return-Path: <MAILER-DAEMON>
Delivered-To: [email protected]
Received: by mail (Postfix)
id CBBB646C13E; Thu, 30 Dec 2010 11:26:53 -0600 (CST)
Date: Thu, 30 Dec 2010 11:26:53 -0600 (CST)
From: [email protected] (Mail Delivery System)
Subject: Undelivered Mail Returned to Sender
To: [email protected]
Auto-Submitted: auto-replied
MIME-Version: 1.0
Content-Type: multipart/report; report-type=delivery-status;
boundary="4B5E246C13C.1293730013/mail"
Content-Transfer-Encoding: 7bit
Message-Id: <20101230172653.CBBB646C13E@mail>
This is a MIME-encapsulated message.
--4B5E246C13C.1293730013/mail
Content-Description: Notification
Content-Type: text/plain; charset=us-ascii
This is the mail system at host mail.
I'm sorry to have to inform you that your message could not
be delivered to one or more recipients. It's attached below.
For further assistance, please send mail to postmaster.
If you do so, please include this problem report. You can
delete your own text from the attached returned message.
The mail system
<[email protected]>: host THEIRSERVER.com[66.117.3.196] said: 550 Access denied -
Invalid HELO name (See RFC2821 4.1.1.1) (in reply to MAIL FROM command)
--4B5E246C13C.1293730013/mail
Content-Description: Delivery report
Content-Type: message/delivery-status
Reporting-MTA: dns; mail
X-Postfix-Queue-ID: 4B5E246C13C
X-Postfix-Sender: rfc822; [email protected]
Arrival-Date: Thu, 30 Dec 2010 11:26:51 -0600 (CST)
Final-Recipient: rfc822; [email protected]
Original-Recipient: rfc822;[email protected]
Action: failed
Status: 5.0.0
Remote-MTA: dns; THEIRSERVER.com
Diagnostic-Code: smtp; 550 Access denied - Invalid HELO name (See RFC2821
4.1.1.1)
--4B5E246C13C.1293730013/mail
Content-Description: Undelivered Message
Content-Type: message/rfc822
Content-Transfer-Encoding: 7bit
Received: from localhost (localhost [127.0.0.1])
by mail (Postfix) with ESMTP id 4B5E246C13C
for <[email protected]>; Thu, 30 Dec 2010 11:26:51 -0600 (CST)
X-Virus-Scanned: amavisd-new at MYSERVER.com
Received: from mail ([127.0.0.1])
by localhost (MYSERVER.com [127.0.0.1]) (amavisd-new, port 10024)
with ESMTP id XlYy8X32jZDY for <[email protected]>;
Thu, 30 Dec 2010 11:26:51 -0600 (CST)
Received: from [192.168.88.11] (mail.MYSERVER.com [96.226.0.23])
by mail (Postfix) with ESMTPSA id 3512046C135
for <[email protected]>; Thu, 30 Dec 2010 11:26:51 -0600 (CST)
From: Brian Jagielski <[email protected]>
Content-Type: text/plain
Content-Transfer-Encoding: 7bit
Subject: Test
Date: Thu, 30 Dec 2010 11:26:51 -0600
Message-Id: <[email protected]>
To: [email protected]
Mime-Version: 1.0 (Apple Message framework v1082)
X-Mailer: Apple Mail (2.1082)
--4B5E246C13C.1293730013/mail--

Sorry. Was trying to be safe, but if it doesn't matter here it is
biff = no
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
header_checks = pcre:/etc/postfix/customheaderchecks
html_directory = /usr/share/doc/postfix/html
inet_interfaces = all
mail_owner = _postfix
mailboxsizelimit = 0
mailbox_transport = dovecot
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
messagesizelimit = 20971520
mydestination = $myhostname, localhost.$mydomain, mail.youngamericagroup.com, youngamericagroup.com, $mydomain
mydomain = youngamericagroup.com
mydomain_fallback = localhost
myhostname = mail
mynetworks = 127.0.0.0/8
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
relayhost =
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = _postdrop
smtpdclientrestrictions = permit_mynetworks permitsaslauthenticated permit
smtpdenforcetls = no
smtpdhelorequired = yes
smtpdhelorestrictions = permitsaslauthenticated permit_mynetworks rejectinvalid_helohostname rejectnon_fqdn_helohostname
smtpdpw_server_securityoptions = cram-md5,gssapi,login,plain
smtpdrecipientrestrictions = permitsaslauthenticated permit_mynetworks rejectunauthdestination permit
smtpdsasl_authenable = yes
smtpdtlsCAfile = /etc/certificates/youngamericagroup.com.EAC01934DECC18B36C5A42CBFED35A0C2C93C0E 5.chain.pem
smtpdtls_certfile = /etc/certificates/youngamericagroup.com.EAC01934DECC18B36C5A42CBFED35A0C2C93C0E 5.cert.pem
smtpdtls_excludeciphers = SSLv2, aNULL, ADH, eNULL
smtpdtls_keyfile = /etc/certificates/youngamericagroup.com.EAC01934DECC18B36C5A42CBFED35A0C2C93C0E 5.key.pem
smtpdtlsloglevel = 0
smtpduse_pwserver = yes
smtpdusetls = yes
tlsrandomsource = dev:/dev/urandom
unknownlocal_recipient_rejectcode = 550
virtualaliasdomains = $virtualaliasmaps
virtualaliasmaps =
youngamericagroup:~ administrator$
Return-Path: <MAILER-DAEMON>
Delivered-To: [email protected]
Received: by mail (Postfix)
id CBBB646C13E; Thu, 30 Dec 2010 11:26:53 -0600 (CST)
Date: Thu, 30 Dec 2010 11:26:53 -0600 (CST)
From: [email protected] (Mail Delivery System)
Subject: Undelivered Mail Returned to Sender
To: [email protected]
Auto-Submitted: auto-replied
MIME-Version: 1.0
Content-Type: multipart/report; report-type=delivery-status;
boundary="4B5E246C13C.1293730013/mail"
Content-Transfer-Encoding: 7bit
Message-Id: <20101230172653.CBBB646C13E@mail>
This is a MIME-encapsulated message.
--4B5E246C13C.1293730013/mail
Content-Description: Notification
Content-Type: text/plain; charset=us-ascii
This is the mail system at host mail.
I'm sorry to have to inform you that your message could not
be delivered to one or more recipients. It's attached below.
For further assistance, please send mail to postmaster.
If you do so, please include this problem report. You can
delete your own text from the attached returned message.
The mail system
<[email protected]>: host plaztex.com[66.117.3.196] said: 550 Access denied -
Invalid HELO name (See RFC2821 4.1.1.1) (in reply to MAIL FROM command)
--4B5E246C13C.1293730013/mail
Content-Description: Delivery report
Content-Type: message/delivery-status
Reporting-MTA: dns; mail
X-Postfix-Queue-ID: 4B5E246C13C
X-Postfix-Sender: rfc822; [email protected]
Arrival-Date: Thu, 30 Dec 2010 11:26:51 -0600 (CST)
Final-Recipient: rfc822; [email protected]
Original-Recipient: rfc822;[email protected]
Action: failed
Status: 5.0.0
Remote-MTA: dns; plaztex.com
Diagnostic-Code: smtp; 550 Access denied - Invalid HELO name (See RFC2821
4.1.1.1)
--4B5E246C13C.1293730013/mail
Content-Description: Undelivered Message
Content-Type: message/rfc822
Content-Transfer-Encoding: 7bit
Received: from localhost (localhost [127.0.0.1])
by mail (Postfix) with ESMTP id 4B5E246C13C
for <[email protected]>; Thu, 30 Dec 2010 11:26:51 -0600 (CST)
X-Virus-Scanned: amavisd-new at youngamericagroup.com
Received: from mail ([127.0.0.1])
by localhost (youngamericagroup.com [127.0.0.1]) (amavisd-new, port 10024)
with ESMTP id XlYy8X32jZDY for <[email protected]>;
Thu, 30 Dec 2010 11:26:51 -0600 (CST)
Received: from [192.168.88.11] (mail.youngamericagroup.com [96.226.0.23])
by mail (Postfix) with ESMTPSA id 3512046C135
for <[email protected]>; Thu, 30 Dec 2010 11:26:51 -0600 (CST)
From: Brian Jagielski <[email protected]>
Content-Type: text/plain
Content-Transfer-Encoding: 7bit
Subject: Test
Date: Thu, 30 Dec 2010 11:26:51 -0600
Message-Id: <[email protected]>
To: [email protected]
Mime-Version: 1.0 (Apple Message framework v1082)
X-Mailer: Apple Mail (2.1082)
--4B5E246C13C.1293730013/mail--

Invalid object name 'SVERS'

Hello,
When trying to perform an Upgrade of a BW3.0B to BW3.5, Prepare Phase, an error occurs in script MSSCONCHECK.SQL.
- Msg 208, Level 16, State 1, Server SRVDW, Line 1
Invalid object name 'SVERS'.
Can anyone help?
Thank you.
Regards,
PT

I have similar eror message during upgrade from ECC 5.0 to ECC 6.0 on MS SQL 2005. The output from my sapup is as shown below:
>> 07:39:34 PREPARE: START OF PHASE INITPUT_PRE
Supply the following information:
Confirm the name of your SAP system: [AWD]
SAP SYSTEM ID     =
The hostname of your central SAP server: [SERVER01]
SAP SYSTEM HOST   =
Enter the SAP instance number: [02]
INSTANCE NUMBER   =
The system identifier of your database: [AWD]
DATABASE ID       =
The hostname of your database server: [SERVER01]
DATABASE HOST     =
Executing script MSSCONCHECK ...
MSSCONCHECK: Connection check failed for the user specified
      SAPup message
SAPup> Errors were found in the logfile MSSCONCHECK.LOG
       after execution of the script MSSCONCHECK.SQL.
SAPup> SAPup cannot proceed until these errors are fixed.
       Please, examine MSSCONCHECK.LOG, fix reported errors and then call R3
gain
            - "continue"
            - "cancel"
Enter one of these options [continue] :=
      SAPup message
SAPup> SQL-scripts must be executed by the NT user account SERVER01\awdadm.
       Check your installation of the integrated security procedure
       on host SERVER01 and make sure that a login for the NT user
       SERVER01\awdadm exists with the following rules:
       - user SERVER01\awdadm owns the role System Administrators
       - user SERVER01\awdadm has the default database AWD
SAPup> Integrated security installed correctly?
            - "no"
            - "yes"
Enter one of these options [no] := yes
Executing script MSSCONCHECK ...
I'm currently running both Solution Manager 4.0 and mySAP ERP 2004 SR1 on the same box in Development environment.
Has anyone gotten a breakthrough on this error messages? Mode set to both SQL and Windows Authentication, can do selct * from SVERS for solution manager database but not for ECC 5.0.
Urgent!!!!

Telneting in to Postfix reports back with old host name

Hi.
I am setting up a home server for my family (4 users) running a late 2010 Mac mini server with OSX Server 3.0.1
I am computer literate but am new to server hosting. I have successfully navigated setting up DNS properlly the way I want it, but am now running into a problem setting up a family mail server.
When I first got the machine I just played around with the server settings under Snow Leopard and turned on some services without really intending to use them as we were all using Google services at the time. I now want to get off those services, such as mail, etc. and host them myself.
Anyway, I've registered a domain and pointed it to my machine, and everything appears to be working properly. I used GoDaddy.com to register the domain.
But after setup of the Mail server, getting my ISPs mail relay server configured, etc. I get the following when I test using telnet to connect to port 25:
server:~ admin$ telnet 127.0.0.1 25
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
220 <oldhostname>.org ESMTP Postfix
421 4.4.2 <oldhostname>.org Error: timeout exceeded
Connection closed by foreign host.
server:~ admin$ sudo changeip -checkhostname
Password:
Primary address     = 10.0.1.254
Current HostName    = <newhostname>.org
DNS HostName        = <newhostname>.org
The names match. There is nothing to change.
dirserv:success = "success"
server:~ admin$ hostname -f
<newhostname>.org
You'll notice I then double checked that my DNS was set up correctly, and then checked the host name again for good measure. However, Postfix is calling my outgoing SMTP by the old and never really used host name still.
I would really appreciate any help you knowledgable people could give me! Is there a library file that needs updating and if so how do I do that? I found a similar problem here but this is on a linux box, which I have no experience with whatsoever, and can't figure out how to do what he did.
Thank you again in advance for any input.

Also Getting the following in Console:
04/01/14 18:04:59,806 kdc[62640]: AS-REQ [email protected] from 127.0.0.1:57943 for krbtgt/[email protected]
04/01/14 18:04:59,808 kdc[62640]: UNKNOWN -- [email protected]: no such entry found in hdb
04/01/14 18:05:00,294 servermgrd[20002]: nsc_smb XPC: handle_event error : < Connection invalid >
And my sudo postconf -c /Library/Server/Mail/Config/postfix -n output:
alias_maps = hash:/etc/aliases
always_bcc =
biff = no
command_directory = /usr/sbin
config_directory = /Library/Server/Mail/Config/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
data_directory = /Library/Server/Mail/Data/mta
debug_peer_level = 2
debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin xxgdb $daemon_directory/$process_name $process_id & sleep 5
dovecot_destination_recipient_limit = 1
enable_server_options = yes
header_checks = pcre:/Library/Server/Mail/Config/postfix/custom_header_checks
html_directory = /usr/share/doc/postfix/html
imap_submit_cred_file = /Library/Server/Mail/Config/postfix/submit.cred
inet_interfaces = all
inet_protocols = all
local_recipient_maps = proxy:unix:passwd.byname $alias_maps
mail_owner = _postfix
mailbox_size_limit = 0
mailbox_transport = dovecot
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
message_size_limit = 10485760
mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
mydomain = grabko.org
mydomain_fallback = localhost
myhostname = server.grabko.org
mynetworks = 127.0.0.0/8
newaliases_path = /usr/bin/newaliases
postscreen_dnsbl_sites = zen.spamhaus.org*2
queue_directory = /Library/Server/Mail/Data/spool
readme_directory = /usr/share/doc/postfix
recipient_canonical_maps = hash:/Library/Server/Mail/Config/postfix/system_user_maps
recipient_delimiter = +
relayhost = smtprelay1.telia.com
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = _postdrop
smtp_sasl_auth_enable = no
smtp_sasl_password_maps =
smtpd_client_restrictions = permit_mynetworks permit_sasl_authenticated reject_rbl_client zen.spamhaus.org permit
smtpd_enforce_tls = no
smtpd_helo_required = yes
smtpd_helo_restrictions = reject_invalid_helo_hostname reject_non_fqdn_helo_hostname
smtpd_pw_server_security_options = cram-md5,digest-md5,gssapi
smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reject_unauth_destination check_policy_service unix:private/policy permit
smtpd_sasl_auth_enable = yes
smtpd_tls_CAfile = /etc/certificates/server.grabko.org.1C04ED269951F447E3422EB93680FCEDAE448203.ch ain.pem
smtpd_tls_cert_file = /etc/certificates/server.grabko.org.1C04ED269951F447E3422EB93680FCEDAE448203.ce rt.pem
smtpd_tls_exclude_ciphers = SSLv2, aNULL, ADH, eNULL
smtpd_tls_key_file = /etc/certificates/server.grabko.org.1C04ED269951F447E3422EB93680FCEDAE448203.ke y.pem
smtpd_use_pw_server = yes
smtpd_use_tls = yes
tls_random_source = dev:/dev/urandom
unknown_local_recipient_reject_code = 550
use_sacl_cache = yes
virtual_alias_domains = $virtual_alias_maps
virtual_alias_maps = $virtual_maps
And my sudo serveradmin fullstatus mail:
mail:startedTime = "2014-01-01 11:58:58 +0000"
mail:setStateVersion = 1
mail:state = "RUNNING"
mail:protocolsArray:_array_index:0:status = "ON"
mail:protocolsArray:_array_index:0:kind = "INCOMING"
mail:protocolsArray:_array_index:0:protocol = "IMAP"
mail:protocolsArray:_array_index:0:state = "RUNNING"
mail:protocolsArray:_array_index:0:service = "MailAccess"
mail:protocolsArray:_array_index:0:error = ""
mail:protocolsArray:_array_index:1:status = "OFF"
mail:protocolsArray:_array_index:1:kind = "INCOMING"
mail:protocolsArray:_array_index:1:protocol = "POP3"
mail:protocolsArray:_array_index:1:state = "RUNNING"
mail:protocolsArray:_array_index:1:service = "MailAccess"
mail:protocolsArray:_array_index:1:error = ""
mail:protocolsArray:_array_index:2:status = "ON"
mail:protocolsArray:_array_index:2:kind = "INCOMING"
mail:protocolsArray:_array_index:2:protocol = "SMTP"
mail:protocolsArray:_array_index:2:state = "RUNNING"
mail:protocolsArray:_array_index:2:service = "MailTransferAgent"
mail:protocolsArray:_array_index:2:error = ""
mail:protocolsArray:_array_index:3:status = "ON"
mail:protocolsArray:_array_index:3:kind = "OUTGOING"
mail:protocolsArray:_array_index:3:protocol = "SMTP"
mail:protocolsArray:_array_index:3:state = "RUNNING"
mail:protocolsArray:_array_index:3:service = "MailTransferAgent"
mail:protocolsArray:_array_index:3:error = ""
mail:protocolsArray:_array_index:4:status = "OFF"
mail:protocolsArray:_array_index:4:kind = "INCOMING"
mail:protocolsArray:_array_index:4:protocol = ""
mail:protocolsArray:_array_index:4:state = "STOPPED"
mail:protocolsArray:_array_index:4:service = "ListServer"
mail:protocolsArray:_array_index:4:error = ""
mail:protocolsArray:_array_index:5:status = "ON"
mail:protocolsArray:_array_index:5:kind = "INCOMING"
mail:protocolsArray:_array_index:5:protocol = ""
mail:protocolsArray:_array_index:5:state = "RUNNING"
mail:protocolsArray:_array_index:5:service = "JunkMailFilter"
mail:protocolsArray:_array_index:5:error = ""
mail:protocolsArray:_array_index:6:status = "ON"
mail:protocolsArray:_array_index:6:kind = "INCOMING"
mail:protocolsArray:_array_index:6:protocol = ""
mail:protocolsArray:_array_index:6:state = "RUNNING"
mail:protocolsArray:_array_index:6:service = "VirusScanner"
mail:protocolsArray:_array_index:6:error = ""
mail:protocolsArray:_array_index:7:status = "ON"
mail:protocolsArray:_array_index:7:kind = "INCOMING"
mail:protocolsArray:_array_index:7:protocol = ""
mail:protocolsArray:_array_index:7:state = "RUNNING"
mail:protocolsArray:_array_index:7:service = "VirusDatabaseUpdater"
mail:protocolsArray:_array_index:7:error = ""
mail:logPaths:Server Error Log = "/Library/Logs/Mail/mail-err.log"
mail:logPaths:IMAP Log = "/Library/Logs/Mail/mail-info.log"
mail:logPaths:Server Log = "/Library/Logs/Mail/mail-info.log"
mail:logPaths:POP Log = "/Library/Logs/Mail/mail-info.log"
mail:logPaths:SMTP Log = "/var/log/mail.log"
mail:logPaths:List Server Log = "/Library/Logs/Mail/listserver.log"
mail:logPaths:Migration Log = "/Library/Logs/MailMigration.log"
mail:logPaths:Virus Log = "/Library/Logs/Mail/clamav.log"
mail:logPaths:Amavisd Log = "/Library/Logs/Mail/amavis.log"
mail:logPaths:Virus DB Log = "/Library/Logs/Mail/freshclam.log"
mail:imapStartedTime = "2014-01-01 11:58:58 +0000"
mail:postfixStartedTime = "2014-01-01 11:59:32 +0000"
mail:servicePortsRestrictionInfo = _empty_array
mail:servicePortsAreRestricted = "NO"
mail:connectionCount = 0
mail:readWriteSettingsVersion = 1
mail:serviceStatus = "ENABLED"
I am only running one zone for the domain, my mind is boggled...

How connect 10g with discoverer (host name give me error)

hi master
sir i install discoverer but not connect with oracle 10g
i flow this step
1. From the Start button use Programs | Oracle - BIToolsHome1 | Configuration and Migration Tools | Net Configuration Assistant.
2. Select Local Net Service Name Configuration the click the Next button
3. Check Add then click the Next button
4. Type the Service Name of the database you want to connect to, then click the Next button
5. On the next screen, select TCP and click the Next button
6. On the next screen, enter the full name for the Host name using a fully qualified domain name and then tell the system which Port the database is using. Click the Next button
7. If you know a username and password on the database select Yes, perform a test and then click the Next button. While this is not a mandatory step it is well worth doing as it will show whether you can connect to the database.
8. On the next screen, the test will either succeed or fail. If it says Invalid username / password click the Change Login button and enter a known username / password combination
9. When informed Connecting... Test successful click the Next button
10. Provide a name that you want to know this connection by then click the Next button
11. When asked if you would like to configure another service name, select No and click the Next button
12. Click the Next button again
13. Click the Finish button
but Host name or step 6 give me error
this is my database name == universi
this is my computer name == fahim
this is my system user password == mfa786
how i configure my discoverer with oracle 10g
please give me idea
thank's
aamir

thank's for your reply
sir try to configure but host name step not success
and i try to test
then taht window give me this error
see errir
Connecting...ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
The test did not succeed.
Some of the information you provided may be incorrect.
Click Back to review the information provided for net service name, or Change Login to change username.
============== this is my bi path
C:\oracle\BIToolsHome_6\network\ADMIN
this is my tnsnames.ora file
# tnsnames.ora Network Configuration File: C:\oracle\BIToolsHome_6\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
UNIVERSI =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = fahim)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = universi)
================ this is my listener.ora file
# listener.ora Network Configuration File: C:\oracle\BIToolsHome_6\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\BIToolsHome_6)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = fahim.iqra.edu.pk)(PORT = 1521))
when i try to run my discoverer that give me this error
unable to connect fahim@universi
failed to connect to databae - ORA-12514: TNS: listeer dose not currently know of service requested in connect descriptor
please give me idea how i connect my oracle 10g with discoverer
thank's
aamir

Host name (server name)

Who can tell me what the host name (server name) is that I need to use when I add my Apple e-mail address on my iPhone?
I already have a hotmail.com address on my iPhone. So I wanted to add my Apple [email protected] e-mail address.
Thank you.

Hi,
Even I faced same issue and able to discover it. One of the reasons for Axis "faultString: (400)No Host matches server name localhost" is due to invalid/wrong TargetEndpointAddress. Please check the TargetEndpointAddress URL in call.setTargetEndpointAddress( endpointURL ), endpointURL should be your service published path (.wsdl file).
Cheers!
raagoo

Invalid node name in Sun Cluster 3.1 installation

Dear all,
I need your advice in Sun Cluster 3.1 8/05 installation.
My colleague was installing Sun Cluster 3.1 8/05 on 2 servers Sun Netra 440 that given hostname 01-in-01 and 01-in-02. But when he want to configuring the cluster, the problem occured.
The error message is:
running scinstall: invalid node name
And when we changed the host name to in-01 and in-02, the cluster can be configured well.
Why did this problem happened?
Is it related with the given hostname that using numeric in the beginning? If yes, can you give the documentation that state about that?
Or maybe you have another explanation?
Thank you for your help.
regards,
Henry

A bug is being logged against this. (though obviously you could manually fix the shell script yourself if you were in a hurry).
The problem partly stems from the restriction on hostnames being relaxed by RFC 1123 which relaxed RFC 952's limitation of the first character to only alpha characters.). See man hosts for more info. I guess our code didn't catch up :-)
Tim
---

What is exactly "host name"?

Hi there again everyone!
I am being asked to give my host name, it is part of a tutorial for making custom ftp-only accounts on OS X.
I was wondering, is it .. My computer's name?
Perhaps more info would be needed to understand my situation, so here is the link with the tutorial:
http://www.ldml.com/services/support/macosx/ftpUserCreate.html
I am at the "NAT?" section, to get around NATs problem, and it says:
Add the line "advertise all <host>" where <host> is either the host name or external IP address for the FTP server.
Since I have a dynamic IP adress, I though just putting my host name could work, but I wanted to be sure what it was exactly before going further.
If after all it's about domain name (?) or the adress, I've made up an account at DynDNS, and got an adress for my computer which is: nikkormat.kicks-***.net
I though maybe it was asking this adress?
Great thanks in advance for help! I am really stuck at this steps.. :P

Hope this helps.
Definition of: host name
The logical name assigned to a computer. On the Web, most hosts are named WWW; for example, www.mycompany.com. If a site is composed of several hosts, they might be given different names such as support.mycompany.com and sales.mycompany.com. SUPPORT and SALES are the host names, MYCOMPANY the subdomain name, and COM is the top-level domain name.

DRM-61026: Unable to create user session for the following reason: Login failed. Invalid user name or password.

All Im very new to Oracle DRM and Im trying to get the app setup on Windows server running SQL Server 2008. When I try to login to the Web Client I keep getting this error.
DRM-61026: Unable to create user session for the following reason: Login failed. Invalid user name or password.
Can you please help

This might be due to The 'Oracle Instance' path may not have been set to a path relative to the 'CSS Bridge Host' (i.e. the Foundation Services machine) on the Configuration > Host Machines > CSS > General tab of the DRM Configuration Utility.
if this is the case then
1. Open the DRM Configuration Console.
2. Go to the Configuration > Host Machines > CSS > General tab of the DRM Configuration Utility.
3. Ensure that the path in 'Oracle Instance' has been set relative to the 'CSS Bridge Host' (i.e. the Foundation Services machine defined in 'CSS Bridge Host').
4. If corrections are made to 'Oracle Instance' then restart the DRM services to pick up the change.
Thanks,
~KKT~

550 Access denied-invalid HELO name (See RFC2821 4.1.1.1.1)

Hello All
I am facing some problem while sending mail which is as:
I have developed a form for sending mail with attachment for this i am using smtp mail server. For this i get some help from OTN. It work well on XP Operating System but when it deployee on Window professional 2003 SP2 (server) then it give message as
Oracle.forms.demos.javamail.SendMessageException:
SendMessage: 550 Access denied-invalid HELO name (See RFC2821 4.1.1.1.1)
Please help me.
Thanks in Advance.

Most likely the name service isn't properly configured on your Windows machine
and it can't get the correct host name for your machine. You can try working
around the problem by setting the mail.smtp.localhost property; see the javadocs
for the com.sun.mail.smtp package.

DynDNS Invalid Host Name

Similar Messages

Maybe you are looking for