Dynex 32" Flat screen with green lines and audio problem
I bought thisDynex 32" flat screen in September and it has started to develop problems. It will be on and green lines start forming and go away. Then the sound goes in and out. The green lines come back and the sound works sparsely. I am wondering what is the issue. I have tried unconnected everything; leaving the power off for hours. Somedays it works great or sometimes out of the blue it just craps out but lately I am getting more bad days than good ones. Any help or suggestions would be great. All I got from Dynex was that I had to bring the TV back to BestBuy and have a master technician look at it....
Sounds like it needs servicing. If you bought it in September it should still be under the 1 yr manufacturer warranty. You can bring it into the store with your receipt and have customer service send it to service for you. It will be returned to the store and can be picked up when service is complete. I will say, however, warranty service can be lengthy. Expect to not have your TV for a few weeks.
If you like posts that I make, be sure to click on the star underneath my name. Thanks!
Similar Messages
-
3 years ago I bought an IMac Desktop that I am using for a lot of things but the most important for dvd montage in Imovies and Idvd.
Now today when I opened my computer I get as usual the white screen with the Apple symbol but there were all over the screen vertical lines with green pixels and after a while the screen gets grey and I get message to restart my computer using the power button or the restart button and when I do so each time the same is happening somebody can tell me what is happening and what caused this. This computer is my work and now I have no income anymore.
On the Apple support site they are asking to enter the serial number and when I do so I get message it is wrong but it is the only one I have and I buy this computer in Cairo Egypt. I am living in Hurghada in Egypt for the moment. When I call the technical support of the shop where I buy it they are telling me that it is the hard disk or ram and that I probably lost everything on it and they are asking a big amount to repair.
Can somebody advise me on this matter. Thanks in advanceYou can find the serial number either in About this Mc in the Menu bar under the , or it should be on a sticker under the foot of the machine.
If you have the install discs, try booting from them, holding down the c key and then using Disk Utility to check the drive.
You can also boot into Safe mode
To start up into Safe Mode (to "Safe Boot"), do this:
1. Be sure the computer is shut down.
2. Press the power button.
3. Immediately after you hear the startup tone, press and hold the Shift key.
Tip: The Shift key should be held as soon as possible after the startup tone but not before.
4. Release the Shift key when you see the gray Apple and progress indicator (looks like a spinning gear).
During the startup in Mac OS X 10.2 through 10.3.9, you will see "Safe Boot" on the Mac OS X startup screen.
During the startup in Mac OS X 10.4 or later, you will see "Safe Boot" on the login window, which appears even if you normally log in automatically.
Please post back with results,
To leave Safe Mode in any version of Mac OS X, restart the computer normally, without holding any keys during startup. -
On Itunes, when I press on a movie that I would like to watch it does not come up. All that comes up it a green screen with other lines in it. How can I fix it?
On Itunes, when I press on a movie that I would like to watch it does not come up. All that comes up it a green screen with other lines in it. How can I fix it?
-
When I turn on Messages, I can't see my messages. All I can see is a screen with horizontal lines. How can I get the regular Messages screen back?
The same is happening for me. Today I decided to reboot my PC because it was acting up a bit, go figure, and then for some reason at the same time the PC was restarting my macbook froze. I had to do a reboot with the restart button but then all that came up was a gray background and in the middle of the screen was a darker gray folder with a white question mark in the middle of it, blinking. I can't imagine why the restart would've affected my macbook. After finding information on how to fix this, I tried all of the steps that were given about using the mac OS X disk to use the first aid utility to fix it. When using the Disk Utility option whenever I select my hardrive and am in the First Aid tab, the only button I can use is the Verify Disk Permissions. The other three buttons, and namely the most important Repair Disk button, is/are not selectable (grayed out). I then tried resetting the PRAM the way they also said with the command + option + P + R and waited for the second startup sound. After that I gave the Disk Utility a second try, but still nothing. And now if I try to just reinstall the OS completely I can't even select a destination volume on the third step (Select Destination). Apparently this means i'm SOL.
-
I can turn off the device naturally. But when i turn it on it shows all white with black lines and different colors. Is my LCD screen broken? If it is, can apple fix it?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
If not covered by warranty
Apple will exchange your iPod for a refurbished one for $99 for 16 GB 5G and $149 for the other 5Gs. They do not fix yours.
Apple - iPod Repair price -
My iPhone five decided to go crazy and give me a white screen with black stripes and I can't get into my phone. I can only use Siri! What's happening?
You posted in the iPad forum instead of the iPhone forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa I'll request that Apple relocate your post.
Cheers, Tom -
plz help with my graphic problem as i noticed tthis morning all the black area of the screen turned into green, anyone help me? will be apriciated,
thanks in advanceclintonfrombirmingham wrote:
Which model do you have? If a mid-2010 15", there are known problems with the GPU and the logic board will be replaced free.
Clinton
The Mid 2010 15-inch MacBook Pro problems are related to kernel panics, so the GPU is still working. In the case of the OP, the GPU has stopped working completely, so his/her problem doesn't belong to the kernel panic problem, so the OP may have to pay. I may be wrong.
Also, the 10.8.4 update won't help as this is a hardware problem, but it's always good to keep OS X updated -
Startup screen has green lines and black box asking to restart
When I try and start my computer, I get a series of vertical lines that go from pinkish red to green. Then a black
Box appears telling me I need to restart in different languages. My computer is fairly old, does anyone know if this problem is fixable? Is it a part that can be replaced?clintonfrombirmingham wrote:
Which model do you have? If a mid-2010 15", there are known problems with the GPU and the logic board will be replaced free.
Clinton
The Mid 2010 15-inch MacBook Pro problems are related to kernel panics, so the GPU is still working. In the case of the OP, the GPU has stopped working completely, so his/her problem doesn't belong to the kernel panic problem, so the OP may have to pay. I may be wrong.
Also, the 10.8.4 update won't help as this is a hardware problem, but it's always good to keep OS X updated -
VGA problem with FiFA 2003 and Audio Problem with NHL2003
i use onboard VGA
800 x600for both games
with no problem
but for Fifa 2003
the screen looks so dark...
all players look like a black people(all black color hair
and black face))
some audio problem with NHL 2003...Have you tried the following?
Adjust monitor settings? i.e. contrast/brightness
Video settings within the game? Some have gamma or brightness settings.
Gamma correction in "Display Properties"?
for starters anyway...... -
While trying to update my iPod touch OS, an error was encountered and iTunes suggested restoring my iPod. The restoration failed and my iPod's screen is a white with tiny grey vertical lines. I have not been able to restart the iPod. Sleep/Wake didn't do it, nor did pressing Sleep/Wake and home simultaneously go it. Any ideas?
- Let the battery fully drain. After charging for an hour try a reset:
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- The connect to computer and restore if necessary and if yu cn. -
Macbook Pro screen showing green line and blacks out all the time
My macbook pro have been recently showing green horixontal line all over the screen at times , and it goes away after restarting couple of times, after i log in the screen black outs after couple of minutes and sometimes the screen act weird
I would suspect that there is a hardware component failing. I would take it in for diagnosis.
Barry -
HDV sequence has green lines and pink dots after export
I digitized some HDV footage from a Sony HVR-VIU into Final cut Pro 7. Everything worked normally through the edit. After exporting the sequence as a quicktime movie, it played back fine as a quicktime. When I attempted to convert it to a media file in Sorenson Squeeze, the file showed up with green lines and pink dots over the picture. To test it differently, I dropped the file into IDVD. Same, result in playback. I've never seen anything like this before, any ideas?
Brad your article was extremely helpful in getting my sequence to work for a DVD. However, I've had success before using the same camera, format, etc., in making DVD's from an HDV sequence, and I'm curious as to what I did wrong this time. The most confusing part to me is that the original quicktime self-contained export played fine through quicktime, but got funky when placed into IDVD and Sorenson's Squeeze compressor. I must have done something wrong up front in digitizing or making settings in FCP, and I'd like to know what it was so I don't do it in the future. Thanks.
-
My 06' Macbook Pro crashed with vertical, green pixelated lines and now will not advance past the turn-on screen with the apple filled with green lines as well. Then, it says to hold down the power button to restart. I have tried several times to get it past this point but tnothing helped.
I have an appointment at the Apple store today, but was wondering : will all of the information and files on my desktop be lost? Or is this a logic board problem?
Any help is much MUCH appricated.I'm not sure, if you're out of warrenty it'll cost quite a bit for the replacement of the logic board replacement...unless you have apple care. you could ask apple to try and recover your hard drive but i'm not sure.
-
I inadvertantly dropped my iphone 3 and now have a white screen with green vertical lines to the right of the screen. It won't sync with itunes due to an error. What can I do?
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If it does not resolve the issue, the device is permanently damaged and will require replacement. -
My Imac is showing gray screen with red line when booting and restarts again
My Imac is showing gray screen with red line when booting and restart again, I can load it in windows 7 safe mode with red lines across the display, pls help
The graphic card is damaged. You can't do anything more than taking your computer to an Apple Store or reseller and getting your graphic card replaced.
Sometimes, when the graphic card is damaged, operating systems can't start. That's caused because the drivers that make the graphic card work detect an error, telling the operating system that the graphic card is unusable, so the operating system can't start and it restarts. However, you can start in safe mode because operating systems use a basic driver in this startup mode
Maybe you are looking for
-
Ok I've seemed to follow the steps in making custom Ringtones but....
I have followed all of the steps correctly from a previous post, and created a few ringtones in itunes, but when I try to sync, they don't show up on my phone. I tried deleting the .m4a file and it still did not show. Someone had mentioned that the r
-
How to use variables in Hidden Fields
Hi, I have the following piece of code: <input type="hidden" name="item_number"> But how can i add a value thats equal to a variable, something like: <input type="hidden" name="item_number" value = $var1> Where var1 is set previously. Thanks.
-
Is thr ne way to word wrap in main window...?
i m making sap script in a tabular fomat wth 15 fields (horizontal) in A4 size so hw to do word wrap in main window for differ differ variables for getting proper result in A4 size format.
-
Cloud isn't showing the same number of apps on different computers
I have two computers. A Windows 7 64-bit desktop and Windows XP 32-bit laptop. After logging into Adobe Creative on my desktop and laptop I see different numbers of apps. On my desktop I have access to a wide assortment of apps (screenshot: http://i.
-
Transfer Posting between plants of QI stock
Hi Can one give me the procedure for transferring the stock between the plants of QI stock. Thanks