Dynex 32 inch 720

We bought a Dynex 32inch LCD 720 TV today. Hooked it up to dish receiver and getting white hortizonal lines in the background that flicker somewhat, Very distracting....The color isn't that great either, not as sharp as our other lcd tv.
What could be the issue and or resolution. I'm tempted to take it back within the 3 days I have. Have a Samsung in the family room with no issues.
Any ideas?

I would definitely take it back and try to either exchange it or pick another brand TV.

Similar Messages

Dynex 32 Inch TV Help

I recently got a Dynex 32 inch tv because it got good reviews online and because it was advertised as being able to connect to computers with an HDMI cable. I have a Macbook Pro laptop from early 2011. I bought the HDMI cable and the HDMI to displayport converter. When everything is connected, the option to connect to the tv is present, but not clickable. I tried changing the screen settings, resolution, turning the computer off and on again (same with tv). I also have the display on my computer set to mirror. Nothing works. When the computer either turns on or I plug in the cord, the computer screen goes blue for a moment, and then nothing changes, and the TV still says "so signal." Does anyone know how to fix this?

Hi mo8333
Have you tried changing the input on the television to the corresponding HDMI?
Tory|Community Specialist | Best Buy® Corporate

DYNEX 32 inch LCD TV and my laptop

I just bought a DYNEX LCD 32 inch TV. I have my laptop hooked up to it and can see it on my TV screen. However, I am not getting sound to come out of the TV. I bought the DYNEX Stereo Mini RCA Y cable but no sound coming from the TV.
thanks

How do you have the laptop hooked to the TV for video? Via HDMI? VGA? DVI? What kind of laptop is it? Are you using the same input number for your laptop and the audio on the TV?
It's probably a setting in your laptop's control panel, but it could be a setting on the TV, too, if the TV is expecting audio from a different input.
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

Dynex 42 inch Plasma TV audio problem

Last night while watching TV, the audio went out. We have the TV set up through a Samsung surround sound system. The DVD function has sound while playing a DVD, but no sound when TV mode is selected. Not able to get any sound from the internal speakers of the TV either....ideas? We have powered down the TV, checked connections and pushed every button we can find....Thanks.

Such damage usually occurs when the screen is hit by an object, or is allowed to be laid face down while it is being moved. Either instance would probably not be covered.
If you find my post useful or informative, please click the icon below with the plus sign and star to give kudos. Thank you!

Big button remote for Dynex?

Hi, I recently got a Dynnex 32" LCD for my mom who is 87. She loves the TV but she can't read the tiny buttons on the not-very-good remote. Is there a "big button" remote that will work with Dynex TVs? All the remote manuals that I have seen don't acknowledge Dynex as existing.
Tim{removed per forum guidelines}

Just finshed setting up a Dynex TV/DVD to work with an Innovage Jumbo remote control.
I used code 135 for my 32 inch Dynex TV/DVD Flat Screen combo.
1) Pressed Code search until the light at hte top went solid red.
2) Pressed TV and the light blinked once and stayed red.
3) Typed in 135 and the red light went off.
4) Pressed the on/off button and the TV turned off.
5) Pressed On/Off again TV came on. ------tested all the buttons everything worked
To use remote with the built in DVD you do not have to type in any more codes .
All you have to do to switch to control the DVDby pressing the input button once.
A menu will come up
You then press the input button as many times as necessary until you have selected DVD.
That is it.
The remote will now control the DVD. --
To go back to the TV, press input again to bring up the input menu and then press the input button until you have selected TV.

User Contributed Tips, PowerBook G4 12-inch Power and Batteries

*The following User Contributed Tips are located in the PowerBook G4 12-inch > Power and Batteries on a PowerBook G4 12-inch forum:*
None at this time.
*The following related tips are located in other areas of Apple Discussions:*
neuroanatomist - Apple notebook batteries – maintenance and troubleshooting
http://discussions.apple.com/thread.jspa?threadID=1764220
Publish date: Oct 23, 2008
See Also User Tips Library

Wow, that's amazing. Sometimes I wonder... (but I won't say anything per TOS).
YES, our 12-inch PowerBooks, the little mighty ultra-portable that could, can be used with 23-inch displays, if you are referring to Part No. M9178LL/A.
http://www.apple.com/displays/specs.html
As you said, you just need the Mini-DVI to DVI adapter, which should have come in the box with your PowerBook. (I'm sure you know that the other adapter is Mini-DVI to VGA, and will not fit if you tried). If you don't have one, you can get them at Apple (retail and online) for $19.95, or even at Best Buy.
Note that Best Buy sells Apple's adapter, and their own "Dynex" brand which is a bit cheaper. (That is, if your Best Buy has the Apple Shop inside). Or, if you have a CompUSA near you--yes, I know people, they are closing down--you might be able to get one at a discount.

How can I connect my Early 2011" Macbook Pro 13" inch, with a generic Mini Display Port to HDMI connector, to a LG 32LD340 LCD TV, using Mountain Lion 10.8.2?

I have an Early 2011" macbook pro 13 inch (core i5 2.3ghz 4gb ram 320hdd) with Mountain Lion 10.8.2, and I want to connect it via Mini DP to HDMI connector, and a HDMI cable to a LCD TV LG 32LD340. When I had Lion OS, I had no problems at all.

If you have an external drive equal to or larger than your internal HD, clone your internal to it with either Carbon Copy Cloner or Super Duper. Test the clone to make sure it's bootable. Then upgrade either one. Try it out first.

I have a brand new MacBook Air 11 inch, 4gb RAM and 256 gb SSD where the screen flickered abnormally and got dead all of a sudden while uploading a photograph in FB. Can anybody help?

I have a new MacBook Air 11 inch, 4gb RAM, 256 SSD and use Mavericks OS. It is still under waranty period.
Just few days ago while I was uploading a photograph in facebook, the screen started flickering abnoromally. I tried using the escape button but nothing was working so switched off by pressing the power button.
After few minutes I tried to switch it on but my system never waked up. Called up the Apple Support, did SMC and PRAM but nothing worked. Then I was advised to take it to Apple's authorised service centre.
At the service centre the engineers diagnoised and then said that the MLB/mother board needs to be replaced. Had waited for six-long days and today they had replaced the MLB/mother board. Now, the system came to life but nothing has booted. The screen goes white and a '?' question mark icon keeps on flickering.
After thoroughly diagnoising it the engineer said that now the problem is with the SSD and the worse thing is all my important documents and photographs etc are no more there. And I don't have a backup of the same!
While Apple Support contact centre is assuring they would replace any other parts if found faulty, but I feel differently. First, the MLB/mother board was changed now they say it is SSD problem - so if the SSD too is replaced there are possibilities of more faults coming up. All I can see and feel that this particular machine has turned out to be architectually deffective that calls for immediate replacement.
Right now I am using a friend's windows pc to write this mail.
Feeling completely miserable - all my expectatations gone after investing in such an expensive machine, loss of all my data, wastage of time and energy and to top it all affecting my daily work.
Can anybody please advise what shall I do?

Take the system to an Apple store to be fixed or replaced as the one you have has defective hardware.

I just updated my RAM and I keep getting a crash report. I have a 21.5 Inch mid 2010 imac. I also am experiencing slow load times and when I try to open Final Cut it says that quartz extreme is not compatible and that I have no VRAM even though I do.

I just updated my RAM (replaced the two 2 gig cards with two Corsair 8 gig cards) and I keep getting a crash report. I have a 21.5 Inch mid 2010 imac. I also am experiencing slow load times with Photoshop and when I try to open Final Cut it says that quartz extreme is not compatible and that I have no VRAM even though I do.
Here is the crash report:
Interval Since Last Panic Report: 5426204 sec
Panics Since Last Report:          2
Anonymous UUID:                    2DD57DDB-BB42-5614-395A-CA6225BDAFD9
Wed Mar 20 11:36:53 2013
panic(cpu 0 caller 0xffffff801aa43d8e): "a freed zone element has been modified in zone: maps"@/SourceCache/xnu/xnu-2050.18.24/osfmk/kern/zalloc.c:219
Backtrace (CPU 0), Frame : Return Address
0xffffff81eb0eb950 : 0xffffff801aa1d626
0xffffff81eb0eb9c0 : 0xffffff801aa43d8e
0xffffff81eb0eba00 : 0xffffff801aa435d2
0xffffff81eb0ebae0 : 0xffffff801aa663f7
0xffffff81eb0ebb20 : 0xffffff801aa67398
0xffffff81eb0ebc70 : 0xffffff801aa6887c
0xffffff81eb0ebd20 : 0xffffff801ad5b8fe
0xffffff81eb0ebf50 : 0xffffff801ade182a
0xffffff81eb0ebfb0 : 0xffffff801aaced33
BSD process name corresponding to current thread: launchd
Mac OS version:
Not yet set
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide:     0x000000001a800000
Kernel text base: 0xffffff801aa00000
System model name: iMac11,2 (Mac-F2238AC8)
System uptime in nanoseconds: 1070542822
last loaded kext at 707348380: com.apple.driver.AppleIRController    320.15 (addr 0xffffff7f9c53e000, size 28672)
loaded kexts:
at.obdev.nke.LittleSnitch    3908
com.apple.driver.AppleIRController    320.15
com.apple.driver.AppleUSBCardReader    3.1.0
com.apple.driver.AppleFileSystemDriver    3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    34
com.apple.iokit.SCSITaskUserClient    3.5.1
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCIBlockStorage    2.2.2
com.apple.driver.AppleUSBHub    5.2.5
com.apple.driver.AppleFWOHCI    4.9.6
com.apple.driver.AirPort.Atheros40    600.70.23
com.apple.driver.AppleUSBEHCI    5.4.0
com.apple.driver.AppleAHCIPort    2.4.1
com.apple.iokit.AppleBCM5701Ethernet    3.2.5b3
com.apple.driver.AppleUSBUHCI    5.2.5
com.apple.driver.AppleEFINVRAM    1.6.1
com.apple.driver.AppleACPIButtons    1.6
com.apple.driver.AppleRTC    1.5
com.apple.driver.AppleHPET    1.7
com.apple.driver.AppleSMBIOS    1.9
com.apple.driver.AppleACPIEC    1.6
com.apple.driver.AppleAPIC    1.6
com.apple.driver.AppleIntelCPUPowerManagementClient    196.0.0
com.apple.nke.applicationfirewall    4.0.39
com.apple.security.quarantine    2
com.apple.driver.AppleIntelCPUPowerManagement    196.0.0
com.apple.iokit.IOUSBHIDDriver    5.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice    3.5.1
com.apple.iokit.IOUSBMassStorageClass    3.5.0
com.apple.driver.AppleUSBMergeNub    5.2.5
com.apple.driver.AppleUSBComposite    5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.5.1
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.iokit.IOAHCISerialATAPI    2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily    3.5.1
com.apple.iokit.IOUSBUserClient    5.2.5
com.apple.iokit.IOFireWireFamily    4.5.5
com.apple.iokit.IO80211Family    500.15
com.apple.iokit.IOAHCIFamily    2.2.1
com.apple.iokit.IOEthernetAVBController    1.0.2b1
com.apple.iokit.IONetworkingFamily    3.0
com.apple.iokit.IOUSBFamily    5.4.0
com.apple.driver.AppleEFIRuntime    1.6.1
com.apple.iokit.IOHIDFamily    1.8.0
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    220
com.apple.kext.AppleMatch    1.0.0d1
com.apple.security.TMSafetyNet    7
com.apple.driver.DiskImages    344
com.apple.iokit.IOStorageFamily    1.8
com.apple.driver.AppleKeyStore    28.21
com.apple.driver.AppleACPIPlatform    1.6
com.apple.iokit.IOPCIFamily    2.7.2
com.apple.iokit.IOACPIFamily    1.4
com.apple.kec.corecrypto    1.0
Model: iMac11,2, BootROM IM112.0057.B00, 2 processors, Intel Core i3, 3.2 GHz, 16 GB, SMC 1.64f5
Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
Memory Module: BANK 0/DIMM1, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920
Memory Module: BANK 1/DIMM1, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.70.23-P2P
Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 0 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: HL-DT-STDVDRW GA32N
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 6
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3

There have been a few reports on here where Corsair RAM seems to have caused users a lot of grief with crashes.
The recommendation on here, mostly, is to only buy RAM from macsales.com or crucial.com as they guarantee their modules will work and offer a no quibble lifetime guarantee.
I'd put the original RAM back in, return the Corsair chips for a refund and re-order from one of those two companies.
http://eshop.macsales.com/shop/apple/memory/iMac
http://www.crucial.com/

Wi-Fi: No Hardware Installed on MacBook Pro 8,2 (15 inch, Late 2011)

Hi Everyone,
For the second time now, I have to bring my Macbook Pro 8,2 (macbookpro8,2, 15 inch, late 2011) running Mountain Lion back to the Genius Bar due to a unrecognized Wi-Fi Airport adapter. The computer was purchased in March of 2012.
The problem started as I was watching 'The Daily Show" online, when suddenly, I lost connection. I clicked on the wi-fi adapter icon on the top menu bar, and saw that no access points were available when there normally were over 20, including mine in the house. I went into the network settings under system preferences and saw that the wi-fi card was off (although it was just on and still showed the full-signal indicator in the menu bar), and attempted to click the button to turn it back on with no response. All other options were either greyed-out or displayed no information. The Hardware tab didn't even display and the mac address suddenly became all zeros.
I rebooted the computer, only to discover the wi-fi indicator on the menu bar displaying no signal. Upon clicking on the icon, the dreaded "Wi-Fi: No Hardware Installed" was displayed. I tried resetting the SMC and PRAM/NVRAM with no success. I also rand the Hardware Troubleshooter ( Option - D upon bootup ) which neither saw the communications device nor reported finding any problem.
I brought it to the Genius Bar, and they ended up replacing BOTH the Logic Board, Wi-Fi adapter, and connection cable between the wi-fi adapter and logic board on July 23, 2012.
Now, it's October 10, 2012, and last night, as I was working through a VPN tunnel on the terminal on one of our remote servers, the SAME THING happened AGAIN! The connection was dropped, same scenario as above, and upon bootup I was greeted with the "Wi-Fi: No Hardware Installed" message again.
The hardware magically disappeard with no mention of this in the Console, as far as I can tell. The Console mentions the loss of connection and inability to contact DNS, but nothing relating to hardware.
For the record, the bluetooth continued to function both times I've had this issue. The first time this happened, I was running Lion and now I'm running Mountain Lion.
So apparently there is something really wrong with either the physical enclosure causing a short somehow, the quality of the Broadcom chip on this wi-fi device, or there's some type of software/power causing the chip to short out.
My compouter is as protected as can be - it's in a Speck plastic housing with a keyboard cover, which was purchased after the first incident, I use it on a hard flat plastic laptop tablet at home, and carry it around in a Timbuk2 Laptop bag. It also has never been dropped.
What's the problem here? Has anyone else had this problem?
Thanks and all the best of luck and success solving your own computer problems
An Admin Becoming More And More Superstitious The Longer He's In This Profession,
TeaKae

Sorry for the late reply. I had a bad experience with the Apple Store and the 'Genius' Bar where I live. However, in the end, I received my MacBook Pro back from repair and everything is working.
Like I said in my previous post, the first time the Wi-Fi broke, I was using Lion. The mother (Logic) board was replaced as well as the Wi-Fi card.
The second time it broke, I was using Mountain Lion. Booting up the Recovery partition and Snow Leopard (new install) did not solve the issue. The Apple Store confirmed that the Wi-Fi card was broken through various testing, which I observed.
Since the attenna wires for the Wi-Fi run through the display, we decided the next logical step was to replace the Wi-Fi card and the display. The reasoning is that there could have been a short or cross connection in the attenna wiring that was causing the Wi-Fi cards to short-out/burn-out. The Bluetooth continued to work in both cases the Wi-Fi failed, meaning that it was unlikely a cable problem.
Since the display and wi-fi have been replaced (20121025), I've had no problems. The wi-fi card is working.
I'm glad the kext file solution has worked for you. I've seen posts on this solution; however, after determining that this was indeed a hardware failure (by using Recovery console, booting from Snow Leopard, and using Hardware Troubleshooter (it didn't even see the Wi-Fi) ), I didn't bother with fiddling with the kext (driver) files. Besides, this hardware is supposed to be designed to work with the OS without any problems whatsoever. Shame on Apple if they don't ship proper drivers for their hardware!
TeaKae

How I Managed to Install Windows 8.1 Pro on an iMac 27-inch, Late 2013

As is typical with many of my Boot Camp installs, this one did *not* goes as smoothly as planned. This installation was particularly troublesome, so I thought I would share how I managed to set up Boot Camp on a brand new iMac (27-inch, Late 2013) using a Windows 8.1 Pro DVD and an external Apple SuperDrive. These are the steps I took:
Download Boot Camp Support Software 5.1.5640 (http://support.apple.com/kb/DL1721)
Copy Boot Camp Support Software to empty MS-DOS (FAT)-formatted USB key
Run Boot Camp Assistant and select third option only (Install Windows 7 or later version)
Computer would reboot after Boot Camp Assistant finished but would boot back into Mac environment and not continue Windows installation
Boot computer holding down option key and select Windows (with DVD icon) and go through initial setup process (could go as far as trying to format Boot Camp partition as NTFS and then got stuck)
Quit Windows installer and reboot computer holding down option key and select EFI Boot
Run Windows installer
These same steps worked for another iMac (same model) that I set up later the same day.

Note: These types of discs or activities are not supported by DVD or CD sharing:
DVD movies.
Audio CDs.
Copy protected discs such as game discs.
Install discs for an operating system such as Microsoft Windows (for use with Boot Camp), or Mac OS X.
Burn a CD or DVD

I have a MacBook Pro (15-inch, Late 2008) and am currently running Snow Leopard 10.6.8. I would like to know which is the most stable upgrade for my model. I have read some reviews of Maverick and Yosemite making the older macs slower. Is this true?

I have a MacBook Pro (15-inch, Late 2008), Intel Core 2 Duo 2.53 GHz, 4GB Memory. and am currently running Snow Leopard 10.6.8.
I would like to know which is the most stable upgrade for my model? Mountain Lion, Mavericks or Yosemite?
When I had gone to the apple care centre in India a few months ago to upgrade my OSX to Mountain Lion, I was told that considering my macbook pro's specs, upgrading it would just make it less efficient, and that I should stick to Snow Leopard unless I consider buying a newer mac that would benefit from it. Is this true? I find it a bit hard to believe. Which update is most recommended?
I also notice that my mac has gotten considerably slower. While using chrome, it buffers and struggles with even just 5 tabs open. Could this have something to do with my current ios? As a precaution, I have always been making sure I have enough free space on disk i.e around 70 - 100 free out of 250GB.
Any advice is appreciated.
Thanks in advance.

Mavericks is no longer available from the App Store, so your choice is Yosemite. One option is to create a new partition (~30- 50 GB), install the new OS, and ‘test drive’ it. If you like/don’t like it it, you can then remove the partition. Do a backup before you do anything. By doing this, if you don’t like it you won't have to go though the revert process.
Check to make sure your applications are compatible.
Application Compatibility
Applications Compatibility (2)

In my time line, either the 720 clips or the 1080 will play. How do I get them both to work?

I have half my film in 1080 and half in 720. I can set my timeline to be in either or, but not both. When it plays 720, the 1080 is scrambled colored snow and vice-a-versa. I found a way to fix this in the help section but I can not navigate back there. I would love some advice.

The cutaways and titles should be linked above the timeline clips, not below

I recently purchased a macbook pro and i am trying to put some camcorder footage from my sony vx 2000 onto iMovies. for some reason i cannot import or capture any footage from my camera and tapes onto the imovies. i have the 9 to 4 inch pin firewall cable

i have a sony vx2000 and a macbook pro and i obtained the 9 to 4 inch firewall cable. my issue is that cant get any footage from my vx2000 to my imovies. i have looked up how to do it online and they make seem like you just plug it in and go its all golden. but not for me what am i doing wrong it does seem to be recoginize that my camera is even plugged in and no way letting import of capture any of my footage to my imovies. please help

The camera must be plugged in to AC power (not batteries only). And generally, the camera should be set to Play mode, not recording mode.

My PC has blue screened twice in the past week so I force quit it it came back on a few times after that it is now grey screening with inch wide blue lines from top to bottom the apple logo is there and it is trying to boot up but nothing happening

My Mac has blue screened a couple of times this week it started to work a couple of times after that but now it is grey screening with inch wide blue lines from top to bottom the apple logo is also there it is trying to boot up again but won't. Not sure don't know anything about how to fix things but I suspect the fan has stopped working as I can't hear one. The problem I have I now live in Turkey and I am 1000 km from the nearest apple shop which is in Istanbul I believe and I now live in Didim, Altinkum I don't trust the everyday Turkish shop to take it to as they will tell you they know how to fix it but will probably make it worse, typical in Turkey. Please can someone help as we use it for our business and obviously I need it up and running ASAP I am using IPad and iPhone at moment but can't access my files which are on PC.

Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

Dynex 32 inch 720

Similar Messages

Maybe you are looking for