Dynex 32 Inch TV Help

I recently got a Dynex 32 inch tv because it got good reviews online and because it was advertised as being able to connect to computers with an HDMI cable. I have a Macbook Pro laptop from early 2011. I bought the HDMI cable and the HDMI to displayport converter. When everything is connected, the option to connect to the tv is present, but not clickable. I tried changing the screen settings, resolution, turning the computer off and on again (same with tv). I also have the display on my computer set to mirror. Nothing works. When the computer either turns on or I plug in the cord, the computer screen goes blue for a moment, and then nothing changes, and the TV still says "so signal." Does anyone know how to fix this?

Hi mo8333
Have you tried changing the input on the television to the corresponding HDMI?
Tory|Community Specialist | Best Buy® Corporate

Similar Messages

When i move a clip into the top project screen, it cuts off about an inch of video. im trying to make a chin face video so i need that inch. any help?

when i move a clip into the top project screen, it cuts off about an inch of video. im trying to make a chin face video so i need that inch. any help?

1) Make sure that your project is in the same aspect ratio as your camera. If your camera shoots 16:9. make a 16:9 project.
2) Check the clip inspector for the clip in your project to see if Image Stabilization is turned on. Stabilization works by zooming in, so you may want to turn it off.

I have MACBook Air and i want to download Microsoft office for it .. BTW its MAC 11 inch :P HELP ME

heeeey guys plzzz help me
how i can to download the microsoft office for my MACBook Air (11 inch)
i want to download it ONLINE XP !

But you did look at the Microsoft site? You also saw the yellow button in the upper right corner ("Buy Now") = http://www.microsoft.com/mac/buy ?

HT5019 unable to get turn on display after turning on the power button ,no caps lock is turning on too,even a light at unlock button to open display is not going down , mine was a late 2008 mac book pro ( 17 inch ).please help me to solve my problem

unable to get my screen on even after turning on power button .
light at display unlock was not going down ,
no caps lock button turning on .
please help me to rectify my problem apple community

unable to get my screen on even after turning on power button .
light at display unlock was not going down ,
no caps lock button turning on .
please help me to rectify my problem apple community

3 inch cd - HELP!!!

Duh, put a 3" CD into the the drive. Didn't need to, but . . . .
It does not show on the desktop,
or in Disk Utility.
How can it be ejected?
Thanks!
Gottsheer

Your user manual states you cannot put mini-discs in the optical drive. You might try turning the computer on its side and shake out the disc. Otherwise, if it's a slot loader you will need to take it in for disassembly in order to remove the disc without damaging the optical drive.
If it's a tray loader you might try the following:
Five ways to eject a stuck CD or DVD from the optical drive
Ejecting the stuck disc can usually be done in one of the following ways:
1. Restart the computer and after the chime press and hold down the left mouse button until the disc ejects.
2. Press the Eject button on your keyboard.
3. Click on the Eject button in the menubar.
4. Press COMMAND-E.
5. If none of the above work try this:
Open the Terminal application in your Utilities folder. At the prompt enter or paste the following:
/usr/bin/drutil eject
If this fails then try this:
Boot the computer into single-user mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.

HDMI CABLE BETWEEN LAPTOP AND TV WILL NOT WORK HELPPLEASE!!

I wanted to watch hockey from my laptop on the tv but i get nothing when i hook the cable. Is there something that has to be set or turned on??
I bought the computer about a year ago so it is not old. The computer is a; Dell Inspiron 1525 and the TV is a; Visio 42 inch
Any help will make me happy, Thank you, Mike {Removed per Forum Guidelines}

Majority of laptops are going to have a default setting of outputting video just to the display. You actually have to tell the laptop to display images out of the HDMI rather than it's screen. This is usually done by holding the "Function Key" down and cycling thru the video output options. The "function" or "fn" key can be located in the lower left hand portion of your keyboard next to the "ctrl" button your video options are typically worked in with your F1 - F12 bottons at the top of your keyboard. Your "FN" key will most likely be a different color than the rest of the keyboard hold this down while searching for your video output key (once again in you F1 - F12 keys) it will have a monitor logo that should be the same color as the "FN" key. Keep holding the "FN" key down and tap the video output key to cycle thru all the options until you find the right one.
.-**Click the star under my name if this information helped! TY!**-.
.-**Click the Solved button if this answered your question!**-.

Illustrator CS6 keyboard increment

I cannot set it to .0001 inch, when I do, it automatically changes it to .0002 inch, please help me. I've been able to have a nudge factor of .0001 inch since I can remember.
Tom
The two images I'm including show my .0001 being typed, then when I switch fields it shows it going to .0002, why won't it stay on .0001 inch?

I was just on the phone with Adobe about this, they informed me that .0002" is the minimum nudge with CS6.
This is totally a downgrade as opposed to a upgrade, I've always been able to make my keyboard increment to .0001" until now. Guess I'll stick with CS5.

HELP NEEDED!! I bought a brand new mac air 11 inch a month ago, and for three days now I can't switch it on.when I do, i can hear the machine is on, but nothing else happens. (yes it is charged). please help

HELP NEEDED!! I bought a brand new mac air 11 inch a month ago, and for three days now I can't switch it on.when I do, i can hear the machine is on, but nothing else happens. (yes it is charged). please help.
I bought it in South Africa and I am currently in Israel.

thank you for the response.its not working, tried that. i can switch the machine on and off, can hear the machine when i hold it to my ear. but nothing works, not the screen, not the sound, nothing.

Does anyone know how to reset the fan on a MacBook Pro 13-inch (Late 2011) to it's factory setting speed (Maybe Terminal may help?)

I have a late-2011 13-inch MacBook Pro running OS X Yosemite. (Standard configuration).
My problem is that I downloaded a fan control application and it worked perfectly, but it started to get annoying so I deleted it.
Does anyone know how to reset the fan speed back to factory settings (Maybe a command in terminal?)

Hello damo1177,
It should help to reset your system's SMC and NVRAM.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
About NVRAM and PRAM
http://support.apple.com/kb/HT1379
Cheers,
Allen

I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).

I need to know which update(s) I can apply to help stabalize the system.

Typing the body of the thread message in the title, huh? -)
I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).
Only Apple could hamstring and tie Mac OS to Windows. There isn't any other than whether you can download the drivers into Windows (you can) but Apple puts a block on the installer setup even if your mac does not support it.
Windows 7 needs at least Boot Camp 3.1 and 3.3 is what you should already have. And you are not getting security updates if you don't have at least 10.6.8 as was pointed out. --- you arent using Software Update as you should. And you should backup and clone Mac (and Windows) as well.
You need Mountain Lion to use Boot Camp 5.x which supports Windows 7 & 8 and 64-bit.
I would upgrade to Lion if you can realizing that Rosetta and PowerPC are no longer supported though.
Mac 101: Using Windows on your Mac via Boot Camp
https://support.apple.com/kb/HT1461
http://www.apple.com/support/bootcamp/
Helpful Apple Support Resources (Forum Overview)
Boot Camp Support
Boot Camp Manuals
Boot Camp 5.0 Drivers
http://support.apple.com/kb/DL1638
Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdfcreate a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
https://support.apple.com/kb/HT4569
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf
Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/
Is there a download of the Boot Camp 5 Support Software if I'm not using OS X Mountain Lion v10.8.3?
Yes, you can download the Boot Camp 5 Support Software here.
http://support.apple.com/kb/DL1638
How do I use the Boot Camp 5 Support Software I downloaded from the web page?
The download file is a .zip file. Double click it to uncompress it.
Double-click the Boot Camp disk image.
Copy the Boot Camp and "$WinPEDriver$" folders to the root level of a USB flash drive or hard drive that is formatted with the FAT file system (see question below for steps on how to format).
Install Windows, leaving the flash or hard drive attached to the USB port of your Mac.
Installation of the drivers can take a few minutes. Don't interrupt the installation process. A completion dialog box will appear when everything is installed. Click Finish when the dialog appears.
When your system restarts your Windows 8 installation is done.
Note: If the flash drive or hard drive was not attached when you installed Windows and was inserted after restarting into Windows 8, double-click the Boot Camp folder, then locate and double click the "setup.exe" file to start the installation of the Boot Camp 5 Support Software.
How do I format USB media to the FAT file system?
Use Disk Utility to format a disk to use with a Windows computer. Here's how:
Important: Formatting a disk erases all the files on it. Copy any files you want to save to another disk before formatting the disk.
Open Disk Utility.
Select the disk you want to format for use with Windows computers.
Click Erase, and choose one of the following from the Format pop-up menu:
If the size of the disk is 32 GB or less, choose MS-DOS (FAT).
If the size of the disk is over 32 GB, choose ExFAT.
Type a name for the disk. The maximum length is 11 characters.
Click the Erase button and then click Erase again.
Which versions of Windows are supported with Boot Camp 5?
64-bit versions of Windows 8 and Windows 7 are supported using the Boot Camp 5 Support Software. If you need to use a 32-bit version, you need to use Boot Camp 4 Support Software, and you must use Windows 7. 32-bit versions of Windows 8 are not supported via Boot Camp. For a complete list of Windows OS support, click here.

My youtube does not work on safari only when i try to play a video it says "This video is not available on mobile add to playlist" But i am using a mac air 11 inch it is not a mobile. Please Help. i have to use the youtube on firefox or chrome

my youtube does not work on safari only when i try to play a video it says "This video is not available on mobile add to playlist" But i am using a mac air 11 inch it is not a mobile. Please Help. i have to use the youtube on firefox or chrome. At times it also say QuickTime Player can't open "video.3gp". and
The file may be damaged or may not be a movie file that is compatible with QuickTime Player. when i try to open a video on youtube on safari

I too am having the same issue as the OP.
Your USER AGENT information is Mozilla/5.0 (Macintosh; Intel Mac OS X 10_10_2) AppleWebKit/600.3.18 (KHTML, like Gecko) Version/8.0.3 Safari/600.3.18
Every webserver that receives a request from your browser is able to determine the HTTP USER AGENT information unless it has been removed by some software (e.g. firewall) before the request was trasmitted.

I had brought the Mac book pro 15 inch retinal display in nov. 2013 in USA. I lost my luggage in the flight transit at Paris CDG. Now I can't install windows 8.1 which I brought from same store frys at LA, USA. Pl. help. Thanks gyanesh

Dear friends
I had brought this Mac book pro 15 inch retinal display and windows 8.1 and then I left to India my home place for vacation now my problem is during flight transit at Paris CDG. For flight change. My luggage got lost and I had to leave for India. On reaching I waited for 6 days daily going to the Mumbai airport and enquiry but now I am stuck I can't work using windows software s for designing engg.
Can someone tell me a better way how can I install windows if I don't have the driver CDs?
Thanks in advance. Sb sob sob
Pl. help. Thanks

Reinstall OSX using the online recovery.
Then use Boot Camp Assistant. One of the Boot Camp Assistant menu items is download the Windows Support Software (drivers). Make sure you follow the Boot Camp instructions.
Or, Reinstall OSX using the online recovery.
Then install a virtual machine like Parallels, Fusion, or VirtualBox. Then install Windows in the virtual machine.
You can use either Boot Camp or a virtual machine to install Windows. Neither method requires any driver cds.

My Computer is running slow, please help 15-inch, Mid 2012 2.3 GHz Intel Core i7

Do i have a virus? so i need to get more ram? what should i do??
Problem description:
My computer is running slow, why?
EtreCheck version: 2.0.6 (91)
Report generated October 28, 2014 at 10:39:06 PM PDT
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,1
1 2.3 GHz Intel Core i7 CPU: 4-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 -
Color LCD 1440 x 900
NVIDIA GeForce GT 650M - VRAM: 512 MB
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 4 days 1:10:48
Disk Information: ℹ️
APPLE HDD TOSHIBA MK5065GSXF disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (257.95 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Agents: ℹ️
[running] com.hp.devicemonitor.plist Support
[running] com.hp.productresearch.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.google.keystone.agent.plist Support
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
AdobeResourceSynchronizer ApplicationHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
TuneupMyMac Application (/Applications/TuneupMyMac.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.07 - SDK 10.6 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.189
Default Browser: Version: 537 - SDK 10.9
SharePointBrowserPlugin: Version: 14.3.8 - SDK 10.6 Support
Silverlight: Version: 5.1.30317.0 - SDK 10.6 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Safari Extensions: ℹ️
Searchme
SlickSavings
Amazon Shopping Assistant
Ebay Shopping Assistant
3rd Party Preference Panes: ℹ️
Flash Player Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      6% WindowServer
      6% Safari
      4% PluginProcess
      1% hidd
      1% com.apple.WebKit.Networking
Top Processes by Memory: ℹ️
236 MB Safari
86 MB PluginProcess
64 MB WindowServer
52 MB com.apple.WebKit.Networking
39 MB softwareupdated
Virtual Memory Information: ℹ️
59 MB Free RAM
1.63 GB Active RAM
1.65 GB Inactive RAM
732 MB Wired RAM
1.27 GB Page-ins
25 MB Page-outs

Ok I have done this, i hope i did it right and ill see if its working any better,
EtreCheck version: 2.0.6 (91)
Report generated October 29, 2014 at 7:07:14 PM PDT
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,1
1 2.3 GHz Intel Core i7 CPU: 4-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 -
Color LCD 1440 x 900
NVIDIA GeForce GT 650M - VRAM: 512 MB
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 0:5:52
Disk Information: ℹ️
APPLE HDD TOSHIBA MK5065GSXF disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (266.64 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Agents: ℹ️
[running] com.hp.devicemonitor.plist Support
[running] com.hp.productresearch.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.google.keystone.agent.plist Support
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
AdobeResourceSynchronizer ApplicationHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
TuneupMyMac UNKNOWN (missing value)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.07 - SDK 10.6 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.189
Default Browser: Version: 537 - SDK 10.9
SharePointBrowserPlugin: Version: 14.3.8 - SDK 10.6 Support
Silverlight: Version: 5.1.30317.0 - SDK 10.6 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
3rd Party Preference Panes: ℹ️
Flash Player Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      5% com.apple.WebKit.WebContent
      2% WindowServer
      1% Safari
      1% identityservicesd
      1% fontd
Top Processes by Memory: ℹ️
159 MB com.apple.WebKit.WebContent
159 MB Safari
112 MB mds_stores
82 MB ocspd
56 MB WindowServer
Virtual Memory Information: ℹ️
1.69 GB Free RAM
1.60 GB Active RAM
320 MB Inactive RAM
673 MB Wired RAM
338 MB Page-ins
0 B Page-outs

TS1365 MacBook Pro (15-inch, Late 2011) It turns on for less than 60 sec thens shutsoff by itself, it won't load to recovery hd partition, won't load to mac OS already replaced MLB, problem still persist.. please help thanks in advance

MacBook Pro (15-inch, Late 2011) It turns on for less than 60 sec thens shutsoff by itself, it won't load to recovery hd partition, won't load to mac OS and already replaced with new MLB, but the problem still persist.. able to run ASD EFI but ASD OS wont work.please help thanks in advance

Holy crap, I got it to work.
Essentially, I just waited until DiskWarrior reached Step 9 and told it to skip the step before it had a chance to freeze. It skipped successfully, moved on, rebuilt and replaced the faulty directory files.
So far the computer is booting like normal, I can log in, and I'm currently copying all of the data to an external as I type this.
I still have no idea why the computer wouldn't mount or boot to any drive, but I guess I'll deal with that later.

Help updating ATI graphics driver in bootcamp Windows 8.1 on iMac (Retina 5K, 27-inch) with 4 GHz Intel core i7, 16 GB 1600 MHz DDR3 and AMD Radeon R9 M295x 4096MB

Help updating ATI graphics driver in bootcamp Windows 8.1 on iMac (Retina 5K, 27-inch) with 4 GHz Intel core i7, 16 GB 1600 MHz DDR3 and AMD Radeon R9 M295x 4096MB

Of note there is a new AMD Catalyst Omega driver released earlier in the week that brings 5K resolution to AMD graphics cards. Here is the link (support.ad.com/en-us/download) to the AMD site. But none of these work with my iMac (Retina 5K, 27-inch, Late 2014), Windows 8 bootcamp.
Please advise.
Thanks in advace.

Dynex 32 Inch TV Help

Similar Messages

Maybe you are looking for