DYNEX TV doesn't get all analog channels

I'm connected to cable, have indicated thru setup that I am so connected.  When I run Autoscan, I do not get all the analog channels, only get thru channel 52.  There is no Cable box  - 

I was just about to suggest what the last person posted, so I'll expand on the solution.
- Isolate the TV, if possible. Take the lead you have going into the splitter(s) and plug it directly into the TV so that it is the only TV on the line.
If you still cannot get channels, contact Geek Squad immediately and notify them of your problem so that you stay within your warrenty or return period.
I am a Bestbuy employee who volunteers on these boards on my own time. I am not paid for posting here, and you should understand that my opinions are exactly that - opinions. I do not represent Bestbuy in any way.
: Open Mailbox

Similar Messages

  • My father updated his iPhone and once he did that he would receive all of my texts and iMessages, is that because we are on the same iCloud account? And if that's why how can I remove it or make it so he doesn't get all my messages

    My father updated his iPhone and once he did that he would receive all of my texts and iMessages, is that because we are on the same iCloud account? And if that's why how can I remove it or make it so he doesn't get all my messages

    you can change the accounts of different apps in the phone's settings menu.

  • NI Datalogger (USB-6009)​- How do I get all the channels output

    How can I get all the channels output to the file?  Is it possible to append data blocks into one data file?

    Hi,
    If you are performing a multiple channel acquisition, the easiest way to write all of your data to a file and have new data appended to that same file will be to use the "Write to LabVIEW Measurement File" Express VI.  This VI is located on the Functions>>Output Palette.
    If you put one of these on the block diagram, a dialog box will appear with options including an "append to file" option.  This Express VI also allows to configure how your channels are saved in the file and the LabVIEW Measurement File can be opened in Microsoft Excel. 
    There are some other vi's for writing data to a file on the Funcions>>All Functions>>File I/O palette.  The "Write to Spreadsheet File.vi" on this palette will work for your application as well.  There is an "append to file" input in which you will have to wire in a "true" constant to append your data.
    I hope you find this information helpful.
    Regards,
    Hal L.

  • Transfer Keyword doesn't getting all columns for BSEG

    Hi Guys,
                  When i am downloading the data from SAP into Application server.I am getting all the columns into my Charatcer type final Internal table.when i am using Open data set for opening th file in Application server and using transfer keyword for transferring the data into Application server path which i mentioned.I am getting
    only 60 columns for Bseg table out of 310 columns.can anybody tell me why is like that?Very urgent.
    Thanks,
    Gopi.

    How  did you know that it is tranferring only 60 columns?
    You would probably have looked at AL11 transaction which can only show limited width(Some 256 chracters i guess).
    But the data will be there.
    To check if the data is there or not, you can read the same file from teh application server and show on a report or download to PC again.
    or use CG3Y to transfer the file on the AS to the PS and see if all the columns are coming or not.
    Regards,
    ravi

  • Read from spreadsheet doesn't get all the columns

    Dear users and moderator,
    I am trying to get data out of a text file delimited by tabs. I would like to transfer the data into a 2D array with the "Read From Spreadsheet File" VI but it seems that only the first column is acquired.
    I double-checked and the delimiter is fine. I also tryed to change the format but no effects.
    Does anybody have an idea about the problem?
    Thanks a lot and all the best,
    Andrea
    Solved!
    Go to Solution.
    Attachments:
    GetData.VI ‏11 KB
    DATA.txt ‏2 KB

    Hey Andrea,
    like SumTumWong and billko recommended, just disconnect the tab limiter constant from the "Read From Spreadsheet File" VI to get your programm running. I receive the correct data, if I don't use the constant.
    If you want to set the tab limiter by hand, right click the string constant and choose "'\' Codes Display". After that, enter "\t" into the constant again and your programm will also work like you want.
    Regards, Stephan
    Attachments:
    Read_From_Spreadsheet_File_result.png ‏11 KB

  • Aperture sync doesn't get all the pictures?

    I have an Aperture Quick Album that picks all 1-star images from the last 30 days. In Aperture, this quick album today shows 300 images. When I select it in iTunes as a synced album, it shows only 173 images.
    What am I missing?

    I'd suggest the Previews need to be updated - this has happened to me when I first started using AP3.
    Took me a while to figure it out too

  • Insignia HDTV - can't delete analog channel

    Can I delete channels from my Insignia 22" NS-LCD22-09 so they can't be accessed at all?
    I want to delete all Analog channels. I can remove them from the viewable list per the Manual instructions, but even when they are not "viewable", if I press "7", it still goes to 7-0 which is Analog. I always remember to press "7-1" to go to the HD channel, but my mother often just presses "7".

    That is a good question and I will find out and get back to you in a day or so. Ok?

  • My daughter has an iPhone and some how we share an iCloud account and she's getting all my texts and contacts. I can't find where to uncheck her phone number on my phone account. Please help

    My daughter and I both  have an iPhone and some how we share an iCloud account and she's getting all my texts and contacts. I can't find where to uncheck her phone number on my phone account so she doesn't get all my texts and contacts. Please help

    Hi Shellyk,
    Go to Settings>Messages>Send & Receive and make sure that only your personal email addresses are listed under the individual phone number.Remove the "shared" iCloud email address.
    For the Contacts, if you are syncing them via iCloud and you both have the same iCloud account, you will both have the same Contact list.
    Cheers,
    GB

  • How to get discrete AC3 channels with sblive

    When playing DVD movies or DIVX video with AC3 sound I get all the channels mixed in stereo. When choosind four speaker configuration there is no sound from surround channels and in my rear speakers I hear the same channels than in my front speakers. I can get discerete AC3 channel playback even with my Realtek onboard sound, I cannot believe I could not do the same with the much more powerfull SBli've 5..

    Cdbular,
    How are your speakers connected to your SBLi've!? If you are connected using a digital coax connecter then you will need to set up your system to do SPDIF bypass. Here is an article that explains what you will get from this kind of connection:
    http://us.creative.com/support/kb/ar...p?l=2&sid=5764
    Jeremy

  • Get TDMS Group Channel Names Array

    I'm having trouble using the TDMS Get Properties to get the channel names of a group.
    I want an array of: ch1_unused, A_SRV_z, etc...
    Attachments:
    TDMS get Group Channel Name Array.JPG ‏64 KB

    If you want to get all the channels names under a group, please use "TDMS List Contents" node.

  • Acquiring data from all the analog channels of NI-3202 NODE using a single sensor

    Hi all,
    I would like to know that can i be able to get the data from all the four analog channels of NI-WSN node 3202(analog input node) connecting only single sensor on the analog input and connecting all the remaining analog inputs using wires and also shorting the ground pins corresponding to each analog input pin.
    By configuring the each channels like 0.5 sec delay for every analog channels to acquire data. can we get the sensor data from all the channels by doing this. basically here i am trying to increase the minimum sampling rate of the ni-wsn NODE 3202 which is 1s.
    I this approach is correct or we cannot do this.
    Thanks

    Stefan,
    In terms of differential and RSE, channels 0-8 should default to differential when using test panels.  Differential needs two input channels to function correctly and these channels must be spread apart by 8 channels. (i.e channels 0 and 7 are a differential pair)  Channel 13, on the other hand, will default to rse if chosen as the reading channel because there does not exist another channel that is eight away.  I am not quiet sure if the virtual channels will default channel 5 into being differential but I will check into it.  If it is differential as default then you may run into problems since channel 13 is utilized in both strain gauge reads.   
    "The second question is, if we can also use the "voltage" setting for measuring strain gauges? we did that in the past, using LabView 6.2."
    If you are referring to "voltage" as acquiring a signal with custom voltage with exciation then I would reccomend using example in LabVIEW called Acq Wheatstone Bridge Samples (with Calibration).  This can be found by navigating to LabVIEW's example finder and expanding Hardware Input and Output>>DAQmx>>Analog Measurements>>Strain.
    I have also included some useful links that may provide more insight into the SCC modules as well.  Also, what is the excitation voltage and power that your strain gauges are expecting?
    SCC Tutorial Series: SCC-SG0x
    SCC Example Series: SCC-SG0x
    Using the SCC-SG11 Shunt Calibration Module
    Thanks,
    Gio L.
    Digital Support - Product Manager
    National Instruments

  • When I login, all of my desktop items are gone, the "Finder" icon is bouncing and a message asking to restore windows is blinking but unresponsive. I can't exit out of it. What do I do? I've tried force quitting, and it doesn't get rid of it.

    When I login, all of my desktop items are gone, the "Finder" icon is bouncing and a message asking to restore windows is blinking but unresponsive. I can't exit out of it. What do I do? I've tried force quitting, and it doesn't get rid of this message. When I login to my husband's account, this message does not appear.

    Hey sunnyday7!
    Here is an article that can help you address this issue:
    OS X: How to quit an unresponsive application using Force Quit
    http://support.apple.com/kb/ht3411
    Additional Information
    OS X automatically relaunches the Finder when it is quit. If the Finder is unresponsive, use Force Quit to relaunch it. Select Finder in the Force Quit Window or Dock, then click Relaunch.
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • I have Elements 11. Sometimes, if I edit a photo in Elements Editor, the date gets changed to the current date. Why does that happen? It doesn't happen all the time, so I can't isolate the cause. Any ideas?

    I have Elements 11. Sometimes, if I edit a photo in Elements Editor, the date gets changed to the current date. Why does that happen? It doesn't happen all the time, so I can't isolate the cause. Any ideas?

    I have Elements 11. Sometimes, if I edit a photo in Elements Editor, the date gets changed to the current date. Why does that happen? It doesn't happen all the time, so I can't isolate the cause. Any ideas?

  • Does anyone get a vibration sound when talking on the iPhone6? It doesn't happen all the time and happens with talking to different people.

    Does anyone get a vibration sound when talking on the iPhone6? It doesn't happen all the time and happens with talking to different people. I have tried to troubleshoot it, but can't find a answer.

    Hey CEVYNBARRY!
    Here is an article for you that will help you address this issue:
    Troubleshooting "A connection failure has occurred", "The specified server could not be found" or similar messages
    http://support.apple.com/kb/ts1843
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • HT201401 I have my a song purchased from Itunes and would like to use part of it for a ringtone and get all the way thur the process of getting it to my phone but it goes to sync to my phone it doesn't show up in my phone like it says it is suppose to und

    I have my a song purchased from Itunes and would like to use part of it for a ringtone and get all the way thur the process of getting it to my phone but it goes to sync to my phone it doesn't show up in my phone like it says it is suppose to under ringtones. Does anyone have any tips on how to do this.

    http://osxdaily.com/2010/09/04/make-free-iphone-ringtones-in-itunes-10/
    https://discussions.apple.com/message/17777381 - making a ringtone
    Getting ringtones folder to show in iTunes - https://discussions.apple.com/thread/2629494 - iTunes > Preferences. Under the General tab below Show, confirm Ringtones is selected

Maybe you are looking for