DYNP_TOO_MANY_RADIOBUTTONS_ON error while submitting the report.
Hi,
i created 2 programs with same selection screens.
1st programe will call the 2nd programe.
SUBMIT ZReport2 VIA SELECTION-SCREEN
WITH p_hist = ' '
WITH p_main = ' '
WITH p_expul = 'X'
WITH p_depr = 'X'
WITH p_uexp = 'X'
WITH p_repro = 'X'
WITH p_gjahr = p_gjahr
WITH p_job = p_job
VIA JOB lv_jobname NUMBER lv_jobnum AND RETURN.
At this point of time, it is throwing error with DYNP_TOO_MANY_RADIOBUTTONS_ON
1. I tried by changing the group names in both the reports.
Report1 have GRP1 & GRP2
Report3 have GRP3 & GRP4.
Any idea why it is happening. Attached screenshot of dump.
Hi,
You need to explicitly pass the values of all the radiobuttons in the submit report. By default, first radiobutton of every radiobutton group is 'X'. In case you want to call the report based on the 2nd radiobutton of the group. You have to pass
WITH p_rad1 = ' '
p_rad2 = 'X' .
You are getting this error, because at a time more than one radiobutton of a group is set.
Regards,
DPM
Similar Messages
-
Errors while submitting the SQL * Plus Report
I am getting th efollowing Error while submitting the Concurrent request to run a report.
FND_CANNOT FIND FILE
concurrent manager encountered an error while running sql * plus for yours concurrent request
Please respond ASAPHi,
Duplicate post see:
Please advise on the Error immediately
Regards,
Gareth
Blog: http://garethroberts.blogspot.com/ -
Error while running the Report
Hi ,
I am trying to run the Report in Bex Analyzer. and once I enter the value for the variable, it gives me message that "Element is not correctly define (please check query)" and when i click on the error it gives me detail message as below :
<b><b>Diagnosis
Additional elements that do not have the same dimension, such as quantities and amounts or amounts and ratios, are added to element Sales Qty Gallons .
Procedure
Check your definition.
If you still want to use this addition, you can suppress the dimensionality of one or both subexpressions by using the 'NODIM' operator. The system then interprets this or these subexpressions as nondimensional numbers.
In the executed query, you can use the Key Figure Definition function to analyze element Sales Qty Gallons .</b></b>
Now the thing is I am already using "NODIM" operator to add those elements. and I m not sure why this error is coming up now because I have created this query a while ago and it wasnt giving me any error at that time but now I have make some changes into it and it;s giving me this error while running the Report. But the thing is I didnt change anything in the element for which it;s showing me error.
Thanks,
NaitikNaitik,
There are two or more key figures in your report. They are defined by different dimensions and somewhere you have a formula with both these key figure.
Edit your query and select the Check Query icon. It will tell you which calculation you have the problem with. Edit this calculation to see which key figures are present.
If the formula is logically correct, best thing to do is to put a NODIM( ) on your key figures that make up the formula, and then change you formula to look at the NODIM( ) version.
That will fix things for you,
Regards
Gill -
Error while opening the report.
hi,
Some time i am getting "500 Internal Server Error',while executing the report.Please check the following exception and give the possible reason for getting this kind of problem.
<b> 500 Internal Server Error</b>
BEx Web Application
Failed to process request. Please contact your system administrator.
<b>Error Summary</b>
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator.
To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
<b>Root Cause</b>
The initial exception that caused the request to fail, was:
Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
com.sap.ip.bi.base.application.exceptions.AbortMessageRuntimeException: Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessageInternal(MessageManager.java:148)
at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:113)
<b>Messages</b>
ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
ABEND: Error in BW:
<b>System Environment</b>
<b>Server</b>
BI Java Release: 7 - Patch level: 0000000009 - Description: BI Web Applications Java - Additional info: - Production mode: true
BI ABAP Release: 700 - Patch level: 0009 - Description: SAP NetWeaver BI 7.0 (BIPCLNT300) - Additional info: - Production mode: true
Java Virtual Machine Classic VM - IBM Corporation - 1.4.2
Operating System AIX - ppc64 - 5.3
<b>Context</b>
ACCESSIBLE false
BEx Runtime Version 1
CACHE true
CONTENT_PADDING true
COUNTRY
DEBUG false
DEBUG_LEVEL 0
DEBUG_MESSAGES false
Initial Query String BUILDTREE=false&NAVIGATIONTARGET=navurl%3A%2F%2F7b8b73fe5fd57ae6c5c1a24aed5d1ac4&NAVPATHUPDATE=false&RELATIVENAVBASE=&SAP-LAFVERSIONS=portal%3A7.0.9.0.1%3Bur%3A7.0.9.0.1&SAP-PP-CONSUMERBASEURL=3A80&SAP-PP-PRODUCERID=com.lenovo.BIP_Lenovosap&TEMPLATE=Z_WEB_CR_ZCRMOPPI_Q0032&THEME=LenovoBlueTwo
LANGUAGE en
Master System Alias BIPCLNT300
PROFILING false
RTL false
Request URL http
SAP_BW_IVIEW_ID pcd:portal_content/d029033/com..BI_Reports/com.BI_Analytics/Z_WEB_CR_ZCRMOPPI_Q0032
SAP_EXTERNAL_SID CLGF6EORaEN7Vivt8TVaQw==3eTBxzbQZSMLxB4o3h9+7w==
THEME_NAME LenovoBlueTwo
TRACE false
TRAY_TYPE PLAIN
Time Thu Oct 04 03:14:20 PDT 2007
User EPSUPPORT (USER.R3_DATASOURCE.EPSUPPORT)
<b>Full Exception Chain</b>
Log ID 00145ED13086005200000889000C719A00043BA80CB04B89
com.sap.ip.bi.webapplications.runtime.controller.MessageException: Error during conversion of the Web template "Z_WEB_CR_ZCRMOPPI_Q0032 from the master system at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest(Page.java:2055) at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.doProcessRequest(Controller.java:841) at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.processRequest(Controller.java:775) at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:412) at com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:21) at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java(Compiled Code)) at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java(Compiled Code)) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java(Compiled Code)) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java(Compiled Code)) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java(Compiled Code)) at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java(Compiled Code)) at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:646) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java(Compiled Code)) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java(Compiled Code)) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java(Compiled Code)) at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753) at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240) at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java(Compiled Code)) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java(Compiled Code)) at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code)) at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java(Compiled Code)) at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code)) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java(Compiled Code)) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java(Compiled Code)) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java(Inlined Compiled Code)) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java(Compiled Code)) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java(Compiled Code)) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java(Compiled Code)) at com.sap.engine.services.httpserver.server.Client.handle(Client.java(Inlined Compiled Code)) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java(Compiled Code)) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java(Compiled Code)) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java(Compiled Code)) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code)) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))Caused by: com.sap.ip.bi.base.exception.BIBaseRuntimeException: Error during conversion of the Web template "Z_WEB_CR_ZCRMOPPI_Q0032 from the master system at com.sap.ip.bi.webapplications.runtime.jsp.portal.service.template.PortalTemplateAccessService.getTemplateContent(PortalTemplateAccessService.java:93) at com.sap.ip.bi.webapplications.runtime.preprocessor.Preprocessor.parseTemplate(Preprocessor.java:161) at com.sap.ip.bi.webapplications.runtime.xml.XmlTemplateAssembler.doInit(XmlTemplateAssembler.java:81) at com.sap.ip.bi.webapplications.runtime.template.TemplateAssembler.init(TemplateAssembler.java:118) at com.sap.ip.bi.webapplications.runtime.base.Template.doInit(Template.java:105) at com.sap.ip.bi.webapplications.runtime.base.PageObject.init(PageObject.java:232) at com.sap.ip.bi.webapplications.runtime.base.Container.init(Container.java:46) at com.sap.ip.bi.webapplications.runtime.impl.Page.initPageObject(Page.java:3226) at com.sap.ip.bi.webapplications.runtime.impl.Page.createPageObject(Page.java:3427) at com.sap.ip.bi.webapplications.runtime.impl.Page.setTemplate(Page.java:4355) at com.sap.ip.bi.webapplications.runtime.impl.Page.doSetTemplateCommand(Page.java:4091) at sun.reflect.GeneratedMethodAccessor293.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.ip.bi.util.MethodInvoker.callMethod(MethodInvoker.java:101) at com.sap.ip.bi.webapplications.runtime.command.CommandProcessorHelper.processCommand(CommandProcessorHelper.java:410) at com.sap.ip.bi.webapplications.runtime.command.CommandProcessorHelper.processCommand(CommandProcessorHelper.java:325) at com.sap.ip.bi.webapplications.runtime.base.CommunicationProcessor.processCommand(CommunicationProcessor.java:144) at com.sap.ip.bi.webapplications.runtime.impl.Page.processCommandInternal(Page.java:1418) at com.sap.ip.bi.webapplications.runtime.impl.Page.processCommandSequence(Page.java:1713) at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:2424) at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest(Page.java:1977) ... 38 moreCaused by: com.sap.ip.bi.deploytime.BIBaseRareSystemException: BI runtime subsystem error: Retrieve MetadataResources Failed1.4.2com.sap.ip.bi.deploytime.metadataresourcecache.MetadataResourceCache:initialize Note call hierarchy at com.sap.ip.bi.deploytime.metadataresourcecache.MetadataResourceCache.initialize(MetadataResourceCache.java:212) at com.sap.ip.bi.deploytime.BISP2Jsp.transformDTT(BISP2Jsp.java:1130) at com.sap.ip.bi.deploytime.BISP2Jsp.convert(BISP2Jsp.java:497) at com.sap.ip.bi.webapplications.runtime.jsp.portal.service.template.PortalTemplateAccessService.getTemplateContent(PortalTemplateAccessService.java:88) ... 59 moreCaused by: com.sap.ip.bi.base.application.exceptions.AbortMessageRuntimeException: Termination message sent ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION MSGV1: SAPMSSY1 MSGV3: UNCAUGHT_EXCEPTION at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessageInternal(MessageManager.java:148) at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:113) at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessageInternal(MessageManager.java:144) at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:113) at com.sap.ip.bi.base.application.service.RfcService.fillMessages(RfcService.java:221) at com.sap.ip.bi.base.application.service.RfcService.doPostProcessing(RfcService.java:171) at com.sap.ip.bi.base.application.service.rfcproxy.impl.RfcFunction.execute(RfcFunction.java(Compiled Code)) at com.sap.ip.bi.deploytime.service.validation_metadata.impl.ValidationMetadataService.getTransformData(ValidationMetadataService.java:53) at com.sap.ip.bi.deploytime.metadataresourcecache.MetadataResourceCache.initialize(MetadataResourceCache.java:196) ... 62 more
Regards,
Ravi.Mhi,
Any suggestion for the above query.
here i am using federated portal concept,once i am opening this report in the portal only i am facing the above problem.
Regards,
Ravi.M -
Error while generating the report on Test env (for divide condition)
Hi All,
I am facing the below error while generating the report in test environment while the same report is working fine on Prod environment.
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 16001] ODBC error state: S1000 code: 1791 message: [Oracle][ODBC][Ora]ORA-01791: not a SELECTed expression. [nQSError: 16001] ODBC error state: S1000 code: 1791 message: [Oracle][ODBC][Ora]ORA-01791: not a SELECTed expression. [nQSError: 16015] SQL statement execution failed. (HY000)
Actually the error is coming for the below logics:
COUNT(DISTINCT RMA.RMA)/COUNT(DISTINCT User."User Name")
"RMA Fact"."Module Backlog"/COUNT(DISTINCT User."User Name")
Can anyone please tell if I need to make any configuration changes as the same logic works perfectly fine on production but not on test.
Thanks in advanceIs anyone having any idea about it...
-
Error While Running the report in oracle apps
Hi All,
I got an error while running the report.The error is
"FDPSTP failed due to ORA-06510: PL/SQL: unhandled user-defined exception".
Please anyone give ur idea to resolve this issue as it is urgent.
Thnaks
SuryaHi;
I got an error while running the report.The error is
"FDPSTP failed due to ORA-06510: PL/SQL: unhandled user-defined exception".
Please anyone give ur idea to resolve this issue as it is urgent.What is EBS version? You get this error on which steps or report? If you make search at metalik as FDPSTP failed due to ORA-06510: PL/SQL: there are 35 similar docs avaliable
Regard
Helios -
Error while executing the report to display on the web in BI 7.0?
Hi All,
In BI 7.0, Getting Error while executing the report to display on the web?
The error message displayed is:
" Network Access Message : The website cannot be found ".
Source: DNS error.
Why this error is coming.
Wht needs to be done.
Thanks in Advance.Hi Kishore,
All the configurations are in proper shape.
We need to change any IP adresses or proxy settings in the Internet explorer (Tools -> Internet options -> Connections -> LAN settings -> etc.,)
Do We need to configure any server address for getting the output to display on web pages in BI 7.0.
EP is not configured over here. Is that causing the problem.
Thansk in Advance. -
Error while executing the report FAGLB03
Hi,
i am getting the below error while executing the report FAGLB03 and double click on the balances to view the report on line item wise.
There is no active info structure for field catalog SAP_FI_DOC_003
Message no. Q6504
Diagnosis
The system wants to access the Archive Information System. It uses the field catalog SAP_FI_DOC_003 to do this. However, there are no active archive information structures for this field catalog.
Procedure
Create an info structure for field catalog SAP_FI_DOC_003 or activate an info structure for this field catalog.
Please could some one help me on this issue.
Thanks & Regards,
VenkatHi,
Please refer the below note.
1361304.
Reg
Madhu M -
Getting error while exporting the report
Hi,
I am facing error while exporting the report. Getting below error.
"No data can be exported because there are no rows.Operation failed."
how come this error is coming even though my report contains data.
please do the needful.
i am using the version discoverer 10g.
Thanks,
RC.I am having the same problem. I found this article in which the user was exporting 100,000 plus records and had the same issue exporting (Discoverer workbook exported to excel error - No dta can be exported and they were able to fix it by adjusting two memory settings in their pref.txt file. However, in my report there are only 1,100 records with eleven columns being returned. I export much larger reports on a daily basis.
Originally, the report was returning records and when I would go to retrieve all records it would tell me that all the rows could not be returned and the data may be incomplete. After scrubbing my SQL I no longer get that message, but the report still will not export and I get the same error as you.
I have not tried the pref.txt settings fix but may try it today to see if that is a workaround. I will then have to evaluate whether it is a good fix or just a band-aid. -
Hi,
i have created some reports which are working fine,
but now i am facing some errors while saving the files.
Also the reports does show only one record while there are many records in the database.
The error messages are as follows:
REP-1051; Unable to save document to file ' F:\Database\Reports\report1.rdf '.
REP-1070: Error while opening or saving a document.
Please help me to find out the exact problem.
Also tell me how can i show all the pages of Database records in a report( while one record on each page)As for the error while saving, you have only one possible thing to try. It it doesn't work, you're sunk.
Assuming the report was not being newly created, i.e. that it was opened from a file on your system, then rename that file to something else (Report_001_OLD.rdf, for example). Then try to save it - Reports will think it is a new file to be saved rather than an existing file to be updated.
Again, if that doesn't work, and if you do not have the auto-save option turned on, then you're sunk. You will have just lost all of the work you've put into that report.
As you'll discover, Reports is not the most robust application ever written. -
Error while opening the report or sheet in the desktop
While opening the reports it gives error as " Failed to Connect Database".
In Some reports it gives error as "Unable to Load EUL item".
Then we check the Menu bar, Tool ----> Options --->EUL.
We found, it is giving Default EUL as blank.
Now it is not allowed to open any sheet as well as not allowed to create new report.
Can any one tell how to resolve this problem?Hi,
I am having the same issue. I am not able to import Crystal Report.
the error is "No matching records found 'Queries' (OUQR) (ODBC -2028) [Message 131-183]"
I have previewed the report using Preview external crystal report option and is running perfect.
please guide ASAP.
Regards
Sonil -
Error While Printing the Report
Post Author: saqib
CA Forum: .NET
HI All,I have joined this forum recently. I found this forum so helpful. I have one query which is: I am using crystal report 10 with Dot Net 1.1, I have created one web report which consists of 19 pages. Once i press the print button on the report after previewing it shows me the error reporting screen of windows. I have checked in event viewer it gives me the following error detail:The description for Event ID ( 1000 ) in Source ( Microsoft Internet Explorer ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: iexplore.exe, 6.0.2800.1106, printcontrol.dll, 10.0.0.533, 0003bb45. Can any one helps me as i am totally stuck in that. Thanks in advance.Try the following if your printer is a network printer
1. Add Printers - select Local Printer
2. In the Add Printer wizard, select "create a new port" option and select "TCP/IP" as type
3. Write the IP address of the network printer in the "Add standard TCP/IP Printer Port wizard". The port name becomes IP_<ip addr>. Click Next.
4. Select the printer and printer type in "Add Printer" wizard.
5. Select a driver and Write a printer name. This completes the setup. Use this printer name to print from Oracle reports.
Hope this helps..
Yogesh
I am getting this error message while printing the report on Network Printer.
"REP-1849: Failed while printing"
Reports Server is not installed on my machine.
On shared printer, it has no problems.
Platform is Win2000. Report Builder 6.0.8.11.3
Plz help !
Thanks in advance ! -
Error While Running the Report(WIS 10901)
Hi Champs,
I am facing an Error while running my Report which is "The Database Error Occurred .The Database Error Text Is :The Supplied XML is not Valid [Measures].[41RK910OO62ME7S8AOB9IEJ7F].WIS 10901.
This reports was running fine earlier but Not we are facing this issue and wen I remove that measure whose key is mentioned in the Error above then the Error is thrown for other Measures which are available in the Query.
What could be the Possible solution for this ?Hi,
Are you sure nothing has changed in the universe?
Thanks -
Error while submitting the Invoice
Hello Everyone,
We are using SRM 5.0 with Extended classic scenario.
I am having a problem while submitting the Invoice.
I keep getting errors saying I need to enter a quantity for a line item that has already been billed in full. When I enter a quantity I then get new error messages telling me I've exceeded amount for that line item.
Please help me in this.
Thanks & Regards,
Khushbu.Hi,
This is typically a process issue. There are a few things I think you can do...
a. If the invoice has reached customer already (bcoz it was raised in the month of May), then, as you now cannot cancel as there has been a lot of wrong entries, you an create a credit memo either from SD side or from FI side so that the customer a/c is balanced and it will not show any AR balance.
b. Raise a debit memo request against the right customer and invoice it.
I think you have to work with your Finance people to be in concurrence before you take up he above process.
Thanks
Mukund S -
Error While Submitting the Custom Report
Hello,
We have requirement on reports 6i to customise a standard report 'Sales Journal By Customer'. Requirement is we need to add a new fields in the layout.
We have copied the standard program and parameters and defined a new custom program and also added the required additional parameters. But when we are trying to submit the custom program it is giving the following error:
APP-FND-00806: The default value RTT is invalid for the Reporting Context segment. Your default value will be ignored. Please inform your system administrator that:
Add the value RTT to the value set for segment Reporting Context, or choose another default value in the Key Flexfield Segments form or Descriptive Flexfield Segments form. Use the Edit Concurrent Program or Define Report Set form for Standard Report Submission report defaults.
Value RTT for the flexfield segment Reporting Context does not exist in the value set FND_MO_REPORTING_ENTITY.
Standard report call a query inside the rdf.
written in parameter sql stmt.
SELECT ENTITY_NAME, ENTITY_ID
FROM FND_MO_REPORTING_ENTITIES_V
WHERE REPORTING_LEVEL = $FLEX$.FND_MO_REPORTING_LEVEL
AND ROWNUM = 1;
now we are change this to
SELECT ENTITY_NAME, ENTITY_ID FROM FND_MO_REPORTING_ENTITIES_V WHERE ENTITY_NAME = 'RTT';
we are making hard code.
we are making a request and attach that report to that request and run the request.
We have done this customisation at our local instance but we are facing the same issue .We are unable to figure out the issue.
Does any of you have any idea why we are getting this error.
It would be great if you can help us regarding this issue.
Thanks in Advanceas this is an eBuiness-related error, you have more chance to get an answer in an eBusiness-related forum, maybe here OA Framework
Maybe you are looking for
-
So i have a table with one column: SUMA_LEI LEI I have a form made for this table. My purpose is to have just on row for this table, so when the user gets to the form page of this table, it gets an error like: "delete previous value, then insert new
-
I use Numbers for my business and I currently use it to create individual invoices and then (manually) enter the totals from the invoices into a Master Spreadsheet where I can see the sum of the individual totals. Is there anyway to set up a formula
-
Re: Fleet management in Plant Maintenance
Hi Guru's Here i have an issue reg the configuration screens in PM In SAP-SPRO---Plant maintenance and Costumer Services, I am not able to find the Screens required for configuration for FLEET MANAGEMENT i e., 1) Set List Processing for Fleet manage
-
Can Final Cut, use XML to cut a movie file?
I am looking into how to cut a movie file with a XML file that has in and out points in seconds. Is this possible to do if not, what program can?
-
ok so i sent all the info to apple about my nano (1st gen) and i was wondering what is the average wait time for the email comfermation on the replacement of do you not get a email for this? im confused