Dynpro_not_found

Hi,
by executing my workflow, i get a Dynpro_not_found error. ABAP-Program "SAPLSWY_WI_Execute" is cancelled.
in the error analysis there is written that dynpro no. 0000 not exists, but i using 0001 (it is also defined in the container)
did somebody know where the problem could be ?
thanks
tunc

Well, perhaps you just <u>think</u> you are using screen 0001. That program name looks strange too, is there really a function group called SWY_WI_Execute?
I would suggest
1) Check that your program name is correct
2) Check that your screen number is passed correctly
3) Debug

Similar Messages

SHORT DUMP DYNPRO_NOT_FOUND, DOUBLE CLICK ON OPERATION IN NETWORK GRAPHIC

Dear Experts,
I am getting shor dump error as DYNPRO_NOT_FOUND in transaction IA02 while double clicking on operation in newtwork graphic.
I found SAPNOTE 397750 for releases SAP_APPL 46 and 46C. But we are using ECC 5.0 SAP_APPL 500.
Please give the solution how to resolve this dump error.
Thanks & Regards,
Tushar

Hi,
there is no coding correction in the note, hence please compare the setting mentioned in the note with your system, if the entry does not exist, you might have to maintain it. otherwise, i am afraid you need to submit a OSS message regarding it.
Regards
Jane

Runtime Error DYNPRO_NOT_FOUND after transport of customer subscreen

Hi,
We have created a new customer subscreen 9002 using transaction OXK1. When the subscreen was transported to the quality system, the subscreen was not generated thereby causing a dump (error DYNPRO_NOT_FOUND) in transaction FB01 which was using the subscreen.
Are customer subscreens not regenerated automatically when they are transported?
Thanks.
Ekit

HEllo,
Sometimes error happen in this process. Please re-generate your scrren.
goto OXK1 Select the screen and go to the menu option Subscreen -> Generate.
REgards,
REnan Correa

Message "DYNPRO_NOT_FOUND" after generate screen by "GENERATE DYNPRO"

Hello together,
after I generate a dynpro in my report by using the GENERTATE DYNPRO-Command; i want to call this dynpro with
call subscreen sub including sub-repid sub-dynnr.
but SAP shows the message "DYNPRO_NOT_FOUND" although the SY-SUBRC is 0 after the GENERATE-Statement.
Can anybody help on that?
Kind regards
Udo

Hi all,
Thanks for the replies. We noticed that one of subprogram is not generated when we upgraded to SAPECC5.0. After compilation, this problem is resolved.

Error Dynpro_not_found

using this code to call me22 but getting error dynpro_not_found
FORM transaction_bdc .
DATA :
wf_number type i,
wf_trans type i,
v_cnt(2) TYPE n,
v_bst(2) TYPE n,
v_bn TYPE i,
v_bstpo(25),
v_ebtyp(25),
v_menge(25),
v_eeind(25),
v_xblnr(25),
v_xblnr1(25),
v_ebelp(2) TYPE n,
v_ebelpt(2),
v_menge1(11),
v_ebt TYPE i,
v_vebtyp LIKE ekes-ebtyp,
v_eb(2) TYPE n,
v_tcselflag(40),
v_tem(2) TYPE n,
v_correct TYPE i,
v_file TYPE string.
DATA: ls_outtab TYPE tb_struc.
DATA: l_valid TYPE c,
        l_locked TYPE c.
CALL METHOD g_grid->check_changed_data
    IMPORTING
      e_valid = l_valid.
IF l_valid EQ 'X'.
    LOOP AT tb_output WHERE check EQ 'X' .
      MOVE-CORRESPONDING tb_output TO itab_output.
      APPEND itab_output.
      CLEAR itab_output.
    ENDLOOP.
    IF tb_output-check <> 'X'.
      MESSAGE e003 WITH text-004.
    ENDIF.
ENDIF.
loop at itab_output.
if sy-subrc = 0.
v_bst = v_bn + 1.
else.
   v_bn = v_bn + 1.
   endif.
endloop.
IF itab_output[] IS NOT INITIAL.
    PERFORM open_group.
***looping at purchase order level.
    LOOP AT itab_output .
*read table itab_output with key ebelp = ekpo-ebelp.
      CLEAR v_bn.
      CLEAR v_ebt.
      PERFORM bdc_dynpro USING 'SAPMM06E' '0105'.
      PERFORM bdc_field USING 'BDC_CURSOR'
      'RM06E-BSTNR'.
      PERFORM bdc_field USING 'BDC_OKCODE'
      '/00'.
      PERFORM bdc_field USING 'RM06E-BSTNR'
      itab_output-ebeln.
***Changing alphanumeric fields and quantity fields to character type**
v_ebelp = itab_OUTPUT-ebelp.
clear v_ebelpt.
v_menge1 = itab_OUTPUT-menge.
v_ebelpt = v_ebelp.
***End Of Changing**
*Checking for the exact number of the item**
     LOOP AT itab_output where ebeln = tb_output-ebeln.
       IF tb_output-ebelp = itab_output-ebelp.
         exit.
       ELSE.
         v_bn = v_bn + 1.
       ENDIF.
     ENDLOOP.
*v_bst = v_bn + 1.
*End Of Checking**
**Mapping items**
        v_tem = 1.
        CONCATENATE 'RM06E-BSTPO(' v_bst ')' INTO v_bstpo.
        CONCATENATE 'RM06E-TCSELFLAG(' v_tem ')' INTO v_tcselflag.
        PERFORM bdc_dynpro USING 'SAPMM06E' '0120'.
        perform bdc_dynpro using 'SAPLMEGUI' '0014'.
        PERFORM bdc_field USING 'BDC_CURSOR'
        v_bstpo.
        PERFORM bdc_field USING 'BDC_OKCODE'
        '=DETA'.
        PERFORM bdc_field USING 'RM06E-EBELP'
        v_ebelpt.
       itab_output-ebelp.
        PERFORM bdc_dynpro USING 'SAPMM06E' '0111'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
        PERFORM bdc_field USING 'BDC_CURSOR'
        'EKPO-BSTAE'.
        PERFORM bdc_field USING 'BDC_OKCODE'
        '/00'.
        PERFORM bdc_dynpro USING 'SAPMM06E' '0120'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
       PERFORM bdc_field USING 'BDC_CURSOR'
       v_bstpo.
        PERFORM bdc_field USING 'BDC_OKCODE'
        '=BSTA'.
        PERFORM bdc_field USING 'RM06E-EBELP'
        v_ebelpt.
       itab_output-ebelp.
        PERFORM bdc_field USING v_tcselflag
        'X'.
**Checking weather Confirmation category already exists**
        SELECT ebtyp FROM ekes INTO v_vebtyp WHERE ebelp =
        itab_output-ebelp AND ebeln = itab_output-ebeln.
        ENDSELECT.
        IF sy-dbcnt > 0.
          v_ebt = sy-dbcnt.
        ENDIF.
        v_eb = v_ebt + 1.
**End Of Checking**
**For Line items**
        CONCATENATE 'EKES-EBTYP(' v_eb ')' INTO v_ebtyp.
        CONCATENATE 'EKES-MENGE(' v_eb ')' INTO v_menge.
        CONCATENATE 'RM06E-EEIND(' v_eb ')' INTO v_eeind.
        CONCATENATE 'EKES-XBLNR(' v_eb ')' INTO v_xblnr.
*End**
        PERFORM bdc_dynpro USING 'SAPLEINB' '0200'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
        PERFORM bdc_field USING 'BDC_CURSOR'
        v_xblnr.
        PERFORM bdc_field USING 'BDC_OKCODE'
        '=BU'.
        PERFORM bdc_field USING v_ebtyp
       itab_output-ebtyp.
        PERFORM bdc_field USING v_eeind
        itab_output-eindt.
        PERFORM bdc_field USING v_menge
         v_menge1.
       itab_output-menge.
        PERFORM bdc_field USING v_xblnr
        itab_output-xblnr.
wf_number = 0.
**End Of Mappings**
*loop at itab_output.
        MOVE-CORRESPONDING itab_output TO ekes.
        modify ekes.
        wf_number = wf_number + 1.
       MOVE-CORRESPONDING itab_output TO eket.
       MODIFY eket.
       MOVE-CORRESPONDING tb_output TO ekpo.
       MODIFY ekpo.
*endloop.
endloop.
     endif.
wf_trans = 0.
       CALL TRANSACTION 'ME22'
       USING itbdc
       MODE   'A'.
wf_trans = wf_trans + 1.
*perform bdc_transaction using 'ME22N'.
**End Of Purchase Order Loop**
    PERFORM close_group.
ELSE.
   MESSAGE i083(zv).
ENDIF.
ENDFORM.                    " TRANSACTION_BDC

HI ,
This basically means that one of the screen number you have entered in the BDC table does not exist , to get the exact error again run the BDC in mode 'A'.
Regards
Arun

Error DYNPRO_NOT_FOUND in MIGO

Hi,
Error DYNPRO_NOT_FOUND occurs at Goods Receipt in MIGO , for a particular production order and clicking on Classification tab to create a batch.
The error indicates that the screen 900 of the program SAPLXVBZ does not exist.
Awaiting valuable inputs.
Thanks in advance.
Neethu

Hi
SAPLXVBZ is main program of function group XVBZ, here there are defined many user-exit: probably there's a statament CALL SCREEN 900 in one of this exit, but nobody has defined that screen.
U should find out in which exit that screen is called and delete that line or create the screen (but it's not really good call a screen or popup in a exit).
Max

DYNPRO_NOT_FOUND : ABAP program "MP058400"

Dear Sir
Category ABAP Programming Error
Runtime Errors DYNPRO_NOT_FOUND
ABAP Program MP058400
Application Component PA-PA-IN
Dynpro does not exist.
The system attempted to use dynpro 0000 in program "MP058400".
This dynpro does not exist.
Kindly help for this
Regards
HARISH.B

Whether you have enhanced the code, any new customization lately?

Dynpro_not_found ML81N

the scenario: Once user exit project Z1(package is $TMP). It contains one enhancement assignment Z2. Z2 has some user's customized codes. Z2 is active and then saved in one change request and last it is sent to PRD and it can work. This sounds some strange but please temptly neglect it. Z2 is one user exit of T-code ML81N.
To avoid some unexpected issues, I want to chagne Z1's package from $TMP to one that can be sent to PRD. So I deleted Z1 and then created project Z3. Its package is zazpc which can be sent to PRD. Then put Z2 into Z3, active Z3, then I have get the dump information when I run ML81N.
The dump information is below. But I didn't create any screen in the user exit. I just put input some codes in the enhancement 'SRVESSR'.
"Runtime Errors DYNPRO_NOT_FOUND
Occurred on 09/11/2009 at 15:57:14
Screen does not exist
What happened?
Error in ABAP application program.
The current ABAP program "SAPLMLSR " had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
The program had to be terminated.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
Program "SAPLXMLU" tried to use screen 0399.
The screen does not exist.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:"

Hi Ganjian,
first of all you have to find out where the screen call is issued.
In Include LMLSRF1B, set a break-point before and after CALL CUSTOMER-FUNCTION '001' (line 50) and check if really comes from your user exit. In the dump, you can also see the Active Calls/Events section to find out more.
As your dump says
Program "SAPLXMLU" tried to use screen 0399.
it might be possible that your user exit does more than you are aware of.
Also possibly someone already used the new ENHANCEMENT FRAMEWORK to insert code at some SPOT.
Regards,
Clemens

DYNPRO_NOT_FOUND in ME41

Dear All,
I am facing some issue in standard Transaction code ME41, on initial screen when i enter mandatory field data and when i hit enter its shows dump error. The short dump screenshot is attached kindly find and please do the needful.

Hi,
Please check the Notes
1517584 - Short dump DYNPRO_NOT_FOUND in T-code ME21(N), ME51(N), ME41, ME31(K/L)
Check and revert
Regards
Pavan

DYNPRO_NOT_FOUND in abap program dumps in st22

Hi All,
We are facing an issue in Abap dumps
Run Time error DYNPRO_NOT_FOUND
Termination occurred in the ABAP program "MP058400" - in "SET_INIT_TAB".
The main program was "MP058400 ".
In the source code you have the termination point in line 49
of the (Include) program "MP058420".
I have an idea that it is releated to Screens but its a standard Tcode PA40 and info type 584.
Please suggest the how can i solve the dump.
Regards
Harsha Teja

Hi Deepak,
We had installed ECC 6.0 Ehp5 recently and released to HCM consultant they are testing PA30 infotype 584.
Regrads
Harsha Teja

DYNPRO_NOT_FOUND runtime error in O4F2

Hi,
I am getting DYNPRO_NOT_FOUND runtime error while call screen statement is executed in t-code O4F2 in production. I checked the screen that is being called. The screen is active and there are no differences in the screen in dev and prod systems.
Can anyone please help me

Hi,
does thi screen has subscreens? Maybe a subscreen is missing or has an error, that it can't be generated?
Please tell us the program and the number of the screen!
Regards,
Klaus

DYNPRO_NOT_FOUND dump in program MP126300

Hello experts,
While we are running a TCODE pp01 select Business role and choose create, we are getting a ABAP DUMP DYNPRO_NOT_FOUND.
Error analysis: The system attempted to use dynpro 0003 in program"MP126300". This dynpro does not exist.
we have searched the marketplace for Notes but no success.
Even though Some business roles are assigned, when we login to the WEB UI we get a message as :
Logon is not possible because you have not been assigned to a business role; contact your system administrator
Our environment
Application : CRM 7.0, Os : windows 2003, Database : MS sql 2005.
Thanks and Regards,
Ranadhir

Hello Ranadhir,
infotype 1263 business role seems to be missing.
In the transaction SOBJ -> Object: PDST -> Piece list are defined all inotypes that will be included in the transport request using the report RHMOVE30.
The check can be made with the report RHSOBJCH. Please run this report you will find mixssing infotype 1263. Select and run Adjust.
Afterwards this entry should be maintained in the transaction SOBJ an the report RHMOVE30 should collect this infotype in the transportrequest. You can check note 442334.
Hope this will resolve your issue.
Thanks
Raja Pamireddy
CRM Moderator

BAPI_SALESORDER_CHANGE - dynpro_not_found ???

Dear all,
I found a lot of discussions about using BAPI_SALESORDER_CHANGE and possible errors, but I didn't find anything about the runtime error 'DYNPRO_NOT_FOUND' ...
As may other developers I want to change 'reason for rejection', but when the BAPI is executing, I get a dump with the error 'dynpro not found' ... I have no idea why I get this error ...
The program I wrote is :
report zsd_settlebulkorders.
tables: vbak, vbap, vbup.
data: begin of gt_items occurs 0,
         vbeln      like vbak-vbeln,
         posnr      like vbap-posnr.
data: end of gt_items.
data: gt_orditems type bapisditm occurs 0 with header line.
data: gt_orditemsx type bapisditmx occurs 0 with header line.
data: gt_return    type bapiret2   occurs 0 with header line.
data: gs_ordhead   type bapisdh1.
data: gs_ordheadx type bapisdh1x.
data: gv_vbeln     type bapivbeln-vbeln.
select-options: s_vbeln for vbak-vbeln.
start-of-selection.
refresh: gt_items.
select vbap~vbeln vbap~posnr into table gt_items from vbap
                                                                                inner join vbak
                                                                                on vbak~vbeln = vbap~vbeln
                                                                                inner join vbup
                                                                                on vbup~vbeln = vbap~vbeln
                                                                                and vbup~posnr = vbap~posnr
                                                                                where vbak~vbeln in s_vbeln
                                                                                    and vbak~auart eq 'ZOR'
                                                                                    and vbup~lfgsa ne 'C'
                                                                                    and vbup~absta ne 'C'.
loop at gt_items.
clear: gv_vbeln.
clear: gs_ordhead, gs_ordheadx.
refresh: gt_orditems, gt_orditemsx, gt_return.
clear: gt_orditems, gt_orditemsx, gt_return.
gv_vbeln = gt_items-vbeln.
gs_ordheadx-updateflag = 'U'.
gt_orditems-itm_number = gt_items-posnr.
gt_orditems-reason_rej = '93'.
append gt_orditems.
gt_orditemsx-itm_number = gt_items-posnr.
gt_orditemsx-updateflag = 'U'.
gt_orditemsx-reason_rej = 'X'.
append gt_orditemsx.
call function 'BAPI_SALESORDER_CHANGE'
   exporting
      salesdocument               = gv_vbeln
      order_header_in             = gs_ordhead
      order_header_inx            = gs_ordheadx
   tables
       return                      = gt_return
       order_item_in               = gt_orditems
       order_item_inx              = gt_orditemsx.
read table gt_return with key type = 'E'.
if sy-subrc ne 0.
   call function 'BAPI_TRANSACTION_COMMIT'
      exporting           wait = 'X'.
   message 'Sales order update was succesfull' type 'S'.
endif.
endloop.
As result we get the following error :

Hi Kurt,
It looks like somebody has created custom logic (modification or enhancement) to display a screen. This results in an exception, as you currently executing the BAPI in a background process and not a dialog process.
You can tell it is custom logic as the screen number begins with a "9", which are usually reserved for customer enhancements.
If you look at the source code extract in ST22 (Use the Tree Menu on the left hand side of the screen "Runtime Error"->"ABAP Developer View"->"Source Code Extract"), you can find the offending screen call.
You can stop the screen call logic by checking if the code is being run in background. Check if the value of the system field SY-BATCH is set to "X", implying the code is being run in a background process. If so then do not process the screen display logic.
Note you may need to add some logic to update the BAPI return fields with information pertinent to the screen that would have been displayed.
Cheers,
Katan

XD03/XD02 Short Dump (DYNPRO_NOT_FOUND)

Hi Group,
When I enter a customer in XD02 or XD03 which does not exist yet & hit enter, first I get a message 'Customer XXX has not been created' and then a short dump is produced.
Runtime errors DYNPRO_NOT_FOUND
Program "SAPLSZA1" tried to use screen 0000.
The screen does not exist.
Have any of you faced this issue. Is it a SAP problem?
Thanks & Regards,
Midhun.

hi
good
sometime it happens like that whenever we try to change the customer using the XD02 AND display the customer using XD03 and we dont have the proper customer number it goes to short dump because when we press the enter key internally it searchse for some ok code and there respective actions and when it does not get them it creates a short dump.
thanks
mrutyun^

Tx VD02 Dump DYNPRO_NOT_FOUND

Hi everybody!
I have a problem with the Tx. VD02, In my DEV environment. When I want to consult any client and i press check i receive the following dump:
Err.tmpo.ejec.: DYNPRO_NOT_FOUND
Runtime Errors         DYNPRO_NOT_FOUND
Date and Time          15.10.2010 12:03:49
Short text
Dynpro does not exist
What happened?
     Error in the ABAP Application Program
The current ABAP program "SAPLSZA1" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
Error analysis
     The system attempted to use dynpro 0000 in program "SAPLSZA1".
     This dynpro does not exist.
Trigger Location of Runtime Error
     Program                                 SAPLSZA1
     Module Name                             SYSTEM-EXIT
I was trying to find the error and i found that it happens in the following code.
ROCESS BEFORE OUTPUT.
MODULE TABSTRIP_DYNTAB.
MODULE DYNPRO_MODIFIZIEREN. " muss 1. Modul sein !!
MODULE tabstrip_dyntab_copy. " uh
MODULE ZAV_VORBEREITEN.
MODULE REFDATEN_VORSCHLAGEN.
MODULE SAVE_MCOD_FUELLEN.
MODULE pfstatus_ermitteln.
MODULE titel_setzen.
*CALL SUBSCREEN ADDRESS INCLUDING 'SAPLSZA1' '0300'.*
MODULE PUBLISH_RESTORE_SWU_OBJECT.
MODULE OIF_GET_LOCATION_DATA SWITCH OIF_BUSINESS_LOCATION.
CALL SUBSCREEN OIFLOCS1 INCLUDING 'SAPLOIFK' '0110'. "IS2ERP
"SWITCH OIF_BUSINESS_LOCATION
Per any reason, when that subscreen is called, the program sends dynpro 0000.
When i use the same program in my QAs environment, there is no problem.
Does anybody have any idea?, Thanks in advance.
Ps.: Sorry about my English, I know it is not so good.

SAP Note 931355 - BP: "DYNPRO NOT FOUND" after upgrade ->
6.40 / 7.00
Note Language: English Version: 7 Validity: Valid Since 06/11/2009
This note appears to address your problem?

Dynpro_not_found

Similar Messages

Maybe you are looking for