DYNPRO_SEND_IN_BACKGROUND in source system

Dear Gurus,
One of our source systems isn't active.
I've tried to do:
=================
1) check - I got errors.
2) activate - errors.
3) restore - I've entered the aleremote passwords, then a remote connection openned to source system. I've entered with administrative user, then in the inbox ("new source system connection") I clicked continue. In message box "check RFC destination" I clicked use. then
appears a message box "connection can not be used". When I click delete a message appears with "error in source system LOGTST400".
4) when I enter the source system TST, in st22 there a dump with label DYNPRO_SEND_IN_BACKGROUND .
5) I've checked the RFC connections, it seems that there is no problem with the settings.
Please Advice,
Dimitry Haritonov

Hi,
Please make sure that target system should be open for all changes. For this you have go through SCC4 and activate the radio button which allows the changes.
if helpful pls award,
Thanks,
JP.

Similar Messages

DYNPRO_SEND_IN_BACKGROUND errors in source system

Hi All,
Yesterday night we kicked DELTA Process Chain.
The PC failed While loading the 0GL_ACCOUNT Attributes, and showing the message Errors in Source System.
and also Failed at Cost Element Attributes but both the error messages are same.
Checked the source system connections and repeated the process, but it was failed again. and tried to load manually and again failed.
When we check the DUMP in Source system (ECC) in ST22 showing the message as below:
"DYNPRO_SEND_IN_BACKGROUND" Current screen: "SAPLSTRD " 0351
Note: We ran FULL load day before yesterday and Ran INITIAL yesterday, We are running DELTA TODAY.
one thing is we just deleted the GL attirbutes Requests manually and loaded INIT , we are able to do INIT load perfectly. but while trying DELTA only this problem is causing.
Thanks in Advance,
Teena

Hello ,
Sometimes the problem happens because the background users do not have the correct authorization. Please check the information in the SAP note 150315.
Kind Regards,
Des

Cannot create source system in RSA1

Hi,
I have a BI System:
Netweaver 7.0 unicode
BI_CONT 7.03
Windows 2003 server
SAP_BASIS: 700_016
SAP_BW: 700_18
I have an ECC 6.0 system:
Netweaver 7.0 non-unicode
Windows 2003 server
SAP_BASIS: 700_015
I go into RSA1 on my BI system
Click on Source Sytems
right-click on SAP and choose Create
I then fill-in the necessary ionformation and click on the Green check.
I am asked to login as an admin user.
I receive a popup sating that user already exist in source system, I choose Continue.
I receive a popup saying RFC destination already exists in source system. I choose USE.
I get this error at this stage: Error in source system JCB275.
So, I check RFC conenctions, they all work fine.
I finally find an error in SM21 in my ECC 6.0 system:
Run-time error "DYNPRO_SEND_IN_BACKGROUND" occurred
short dump generated.
So, I go into ST22 and try to get more info on the short dump (I only copy/pasted some info):
Runtime Errors DYNPRO_SEND_IN_BACKGROUND
Date and Time 06.02.2009 09:56:18
The current ABAP program "SAPLSTRD" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
During background processing, the system attempted to send a
screen to a user.
Current screen: "SAPLSTRD " 0351.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DYNPRO_SEND_IN_BACKGROUND" " "
"SAPLSTRD" or " "
"SYSTEM-EXIT"
Client.............. 700
User................ "BRUNEERI"
Transaction......... "RSA1"
Call Program........."SAPLRSAC"
Function Module..... "RSAP_BIW_CONNECT"
Call Destination.... "JCB275"
Source Server....... "svr60dbw_DBI_11"
Source IP Address... "10.16.33.3"
I search SDN and SAP notes to no avail.
Note that this ECC 6.0 system is also connected to another BI system and it works fine on that other system.
thanks to all

solution found:
config needs to be opened on source system ,if not, a popup tries to tell you that config needs to be opened, but it cannot because the frontend is not active on this connection.

Source System creation error

Hi..
I cannot create R/3(productive) source system at BW (development)
I checked password, cross-client and client specific are all changeble (t-code SCC4) and namespaces, sofeware are also modifiagle (t-code SE06) at R/3.
At BW, RFC connection is Ok (SM59) and R3 side, RFC also connected w/o problem.
But the error is still not resolved.
What I have to do now..

Hi Ravi..
Error massage is...
Massage No. RSAR502
Diagnosis
With Remote Function Call to system error Screen output without connection to user. ccurred.
and runtime error massage is (ST22)
DYNPRO_SEND_IN_BACKGROUND
Rita

Error while creating source system in BI: Modification not possible

Hi All,
We are about to move to production, and therefore it's necessary to create in BI the source system related to our ECC (R/3). While trying to perform this action from BI side we received the error message:
SAP system has status 'not modifiable'. Because of this, and following with known consultants practices we've changed the client to customazing but it still not working although the message at this time is: Changes to repository or cross-client Customazing are not permitted. We have also verified transaction SE06 but it's not possible to change the Cross-Application Component to Modifiable.
Did someone face with this same problem before?
Thanks to all in advance,
Regards,
José.-

Hi Rick,
I really appreciate your quick response. We followed your recommendation and could create the source system without problems. Thanks once again!
Best Regards,
José.-

Error in creation of source system

Hi Experts,
We are facing a problem while creation of source system. We are getting an error "You have no authorization for basic types (activity 03)" Kindly help me to resolve this issue.
Regards,
Jitendra

Hi there,
if you get the error again, please go tcode su53 directly and see for which object the authorization is missing. I understand you have SAP_ALL access but for any authorization issue we normally go to SU53 tcode and verfiy.
So once you get the object name then go to SU01 and open your id. Go to authorization tab and find for that object and see if '03' activity is assigned to you or not.
If this step is absolutely fine then we can think of alternative solution.
Regards,
Anup

Source system in Responsibility TAB

Hi All
I am finding difficulty to know exact source system (product responsibilty). I could see lot of text.It might be good If sap would have maintained Logical system here instead of this Source system text ,I want to know the correct text according to logical system.
Any help is appreciated.
Muthu

Hi Muthurama,
The texts that are displayed are the names of the logical systems maintained in your system. Probably you can rename than as <LOGSYS - LOG SYS NAME> so that it helps you to identify the systems correctly.
Even you can maintain the logical system name for the logical system text. This would solve your problem.
T-Code: BD54.
Best Regards
Kathirvel

Data load problem - BW and Source System on the same AS

Hi experts,
Im starting with BW (7.0) in a sandbox environment where BW and the source system are installed on the same server (same AS). The source system is the SRM (Supplier Relationship Management) 5.0.
BW is working on client 001 while SRM is on client 100 and I want to load data from the SRM into BW.
Ive configured the RFC connections and the BWREMOTE users with their corresponding profiles in both clients, added a SAP source system (named SRMCLNT100), installed SRM Business Content, replicated the data sources from this source system and everything worked fine.
Now I want to load data from SRM (client 100) into BW (client 001) using standard data sources and extractors. To do this, Ive created an InfoPackage in one standard metadata data source (with data, checked through RSA3 on client 100 source system). Ive started the data load process, but the monitor says that no Idocs arrived from the source system and keeps the status yellow forever.
Additional information:
BW Monitor Status:
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System Response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
BW Monitor Details:
0 from 0 records
but there are 2 records on RSA3 for this data source
Overall status: Missing messages or warnings
- Requests (messages): Everything OK
o Data request arranged
o Confirmed with: OK
- Extraction (messages): Missing messages
o Missing message: Request received
o Missing message: Number of sent records
o Missing message: Selection completed
- Transfer (IDocs and TRFC): Missing messages or warnings
o Request IDoc: sent, not arrived ; Data passed to port OK
- Processing (data packet): No data
Transactional RFC (sm58):
Function Module: IDOC_INBOUND_ASYNCHRONOUS
Target System: SRMCLNT100
Date Time: 08.03.2006 14:55:56
Status text: No service for system SAPSRM, client 001 in Integration Directory
Transaction ID: C8C415C718DC440F1AAC064E
Host: srm
Program: SAPMSSY1
Client: 001
Rpts: 0000
System Log (sm21):
14:55:56 DIA 000 100 BWREMOTE D0 1 Transaction Canceled IDOC_ADAPTER 601 ( SAPSRM 001 )
Documentation for system log message D0 1 :
The transaction has been terminated. This may be caused by a termination message from the application (MESSAGE Axxx) or by an error detected by the SAP System due to which it makes no sense to proceed with the transaction. The actual reason for the termination is indicated by the T100 message and the parameters.
Additional documentation for message IDOC_ADAPTER 601 No service for system &1, client &2 in Integration Directory No documentation exists for message ID601
RFC Destinations (sm59):
Both RFC destinations look fine, with connection and authorization tests successful.
RFC Users (su01):
BW: BWREMOTE with profile S_BI-WHM_RFC (plus SAP_ALL and SAP_NEW temporarily)
Source System: BWREMOTE with profile S_BI-WX_RFCA (plus SAP_ALL and SAP_NEW temporarily)
Someone could help ?
Thanks,
Guilherme

Guilherme
I didn't see any reason why it's not bringing. Are you doing full extraction or Delta. If delta extraction please check the extractor is delta enabled or not. Some times this may cause problems.
Also check this weblog on data Load errors basic checks. it may help
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Thanks
Sat

Unable to 'set the default source system' to Install Business Content

Hi,
Maars here. This is my first post hoping that in future ones I'll also be lending a helping hand.
I am trying to 'Install Business Content' under the BUSINESS CONTENT section in txn RSA1. I am doing this after 'Transfer Data Sources' in R/3 and I can now see all the data sources (under the application component hierarchy) for the source system. But I am not able to see the Info Objects in the Business Content.
When I try to set R/3 as the default source system (got this screen after clicking a icon in the standard tool bar), BW is not saving the settings ie., I set the R/3 as the default and then click on OK. If I go back to the same screen again, I find that my settings were NOT saved.
Could you please help me out?
Thank you.

Hi,
It seems to be a bug in version 3.5.
Do like this:
After you open the screen to choose the dafault source system
Clcik on 3rd button(F6) available in the bottom of the scrreen.
And then select teh tick mark for required system.
And then click on Continue button
You have do this step before you drop the cube to right side of the cube.
Ok, even after all these steps , if you reopen the screen you would not see Tick mark u have done just before. DONOT WORRY ABT it.
Drag and drop required cube with dat flow before.
Now you can see the Transfer rules with selected Source system only in the collected Objects.
With rgds,
Anil Kumar Sharma .P

Error: Source system already exists. Message no. RSAR201. Points rewarded.

Error: Source system already exists. Message no. RSAR201
We have installed a BI 7.0 system recently and I am setting up the server to connect to SAP ERP.
In TA SM59 a connection to the SAP ERP has been established. The Remote Logon is OK, (meaning clicking it nothing happens). The Connection Test is OK.
According to the Best Practices paper: B84: BI Connectivity (B84)
http://help.sap.com/bp_biv170/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
I have done the following:
In TA RSA1
1.     Choose Modeling.
2.     Choose Source Systems.
3.     Select SAP in the window on the right.
4.     Choose the Context menu (right mouse click).
5.     Choose Create.
6.     Make the following entries:
Available destination: (The above tested connection)
Background user in source system: RFCUSER (I created the user in ERP according to step 1.4 in B84)
Password for source system: *****
Background user in BI: RFCUSER (I created the user in BI according to step 1.4 in B84)
Password for BI user: *****
8.     In the dialog box Please log on as an administrator in the following screen choose Continue.
9.     Log on to the Source System with your administrator user. Choose the correct client.
10.     On the dialog box New Source System Connection choose Continue.
THEN I GET THE ERROR:
Source system already exists.
Message no. RSAR201
What is wrong? I cannot locate any SAP notes to help on this problem.
Best regards,
Carsten Pold

Hello Carsten,
just some guessing at this point...
a)
Is the connection really new? For example, was there another system connected to that ERP, maybe with the same logical name? Or was any of the two systems copied from another system?
b)
Authorisations issues in this process may result in strange error messages. Make sure that the admin user in step 9 really has SAP_ALL. There are a lot of complex activities that this user must be able to do (ALE management, RFC access etc.). To exclude issues with the RFCUSER users: If possible, give them SAP_ALL, too. Of course only temporarily for testing.
c)
I normally don't use existing RFC destinations. Usually, I let the system create those, too. So maybe it makes a difference if you remove the RFC destinations on both sides and try again. In that case, you will of course have to provide the RFC details when creating the source system connection...
I hope this brings you forward a little...
Regards,
Christian!

Source system error - RFC connection failed

Hi Gurus,
I have installed ECC6 on my PC but not when i am trying to created the DS its not allowing me its saying appl comp hierarchy for source susyem "T90*" doesnt not exist.
so tried going to source system -> done a check for my source system then i got the following errors
Source system "T90*" is inactive
Entry in outbound table not found
Entry in inbound table not found
Basic type does not exist
Check failed for RFC connection T90CLNT090 ; check destination
can any one tell me how to fix this issue?
Regards,
Ravi

Hi Ravi,
Did you run appication component hierarchy in source system(TX-RSA9)
then activate your data source
then replicate in BW system.
Check here for BW connectivity with source system.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bi/stepbyStepBusinessIntelligence
Thanks,
Vijay.

Source system (R/3) error while testing from BW

Hi,
We are trying to test the source system from BW. We have defined LOGICAL system in R/3 as well as in BW. We have also checked in sm59 for RFC tests and found to be successful in R/3 side as well as BW side. Bur when we tried to activate the R/3 source system in BW side,w e are getting the following errors. Please help urgently.
1.The following errors occured in source system - RSAR -374
2.Result of the destination check: Timed out - RSAR -375.
Thanks,
David

Have a look at this:
Problem Activating Source system RSAR 374, RSAR 375
Regards.

Multiple DataTargets in a BI 7.0 System to One DataSource in Source System

Currently, I do not have access to BI 7.0 system. I am wondering whether it is possible to connect MULTIPLE DataTargets of a single BI 7.0 system to ONE DataSource in the source system? I have searched the forum, but I couldn't find relevant posts. If I am not wrong, until BW 3.5, once a DataSource is assigned to an InfoSource, it can not be assigned to any other InfoSource of the same BW system. I have heard that this has changed in BI 7.0 with the new DataFlow concept.
The current requirement is that multiple DataTargets of a single BI system need to get DELTA data from the same DataSource in the source system. If this is technically possible in BI 7.0, should the source system also support such an assignment (since the DELTA load timestamps are maintained in the source system)? What source systems currently support this feature, if any? What are the appropriate tables in the source system that I need to look at to do further investigation?
All the useful inputs regarding these questions will be rewarded with points. Let me know if you need any further clarification of the requirement. Thanks!
Sameer

Hi Sameer,
But since there is only one transformation between the PSA and DataTarget, all the data (irrespective of the indicator) will flow through unless I filter on the "planning stage" indicator
You can create one transformation between Datasource and ONE DataTarget. But in your case, you have TWO datatargets. So you have to create two DTP's which can have diffrent filter parameters.
You can fill two different targets ( cube1: before manual update, cube2: after manual update) using your datasource.
For this, you need to create two transformation. Keep in mind, everytime you create a transformation you must create a DTP for data movement.
So you will have:
DS1 -- TRANS1-- DTP1 --Cube1
DS1 -- TRANS2DTP2Cube 2
In DTP1 set filter for indicator :X and DTP2 set filter for indicator :Y. Both DTP1 and DTP2 should work in delta mode.
I would suggest you to create one initialization for your DS1. if it is not possible create two infopackages for two initializations. I suppose you have the indicator in selection parameters of infopackages.
Derya

HELP!! Create source system failed in BW ( ORA-01403: no data found)

Hi,
I cannot create Oracle DB as a source system in my BW (7.01).
In system log, I got the following information.
============================
Database error 1403 at CON
> ORA-01403: no data found
============================
How can I fix this issue?
It's kind of urgent.
Thanks!
Regards,
Steven
Edited by: Wen Steven on Sep 30, 2011 6:09 PM

Hi Steven,
Please check the below thread
SQL/Buffer trace RC=1403
Regards,
Venkatesh

Create SAP Source System Failed

Hi all,
We are using NetWeaver 2004s BI and try to connect to ECC 5.0. I tried to create SAP source system but got error message saying "RFC user logon failed". When I check RFC destination in ECC 5.0 for BI, the test connection is ok, but the remote logon will pop up another logon screen asking for id and password. I am pretty sure that the id and password in RFC destination is correct. The RFC destination in BI is ok. Can you help me out with this? Thanks a lot in advance.

Hi,
Check the Default Logon Client for ECC 5.0
and verifiy that the User is in the Same Client
Each RFC destination has a mapped user for specific Client..Check the Client and User in the same client
regards
Happy Tony
Message was edited by: Happy Tony

DYNPRO_SEND_IN_BACKGROUND in source system

Similar Messages

Maybe you are looking for