DYNPRO_SYNTAX_ERROR runtime error occurs in execution of module program
Hi...
I have created a module pool program and screen there is no error in that . But at the time of executing thru tcode , it shows runtime error as ,
Runtime Errors DYNPRO_SYNTAX_ERROR
Date and Time 09.07.2008 13:48:47
Short text
Syntx error or generation error in a screen.
What happened?
At the screen generation it was detected that a screen to be generated
has a syntax error or could not be generated due to another error.
Error analysis
Screen "ZSCCHK" 0100 could not be generated.
Trigger Location of Runtime Error
Program ZSCCHK
Module Name SYSTEM-EXIT
Pls give me the solution .
Thanks & regards
Deepa.
HI..
I HAD DONE A MISTAKE ON SCREEN FLOW-LOGIC , IT CAN ABLE TO ACTIVATE BUT NOT GENERATED SCRENN NO. BECOZ I HAD SPECIFIED AS ,
PAI
MODULE CHECK_VALUES INPUT .
INSTEAD OF
MODULE CHECK_VALUES .
THIS IS THE ERROR.
Regards
Deepa
Similar Messages
-
I recently upgraded to Microsoft 365 Home and use Outlook 2013. The Acrobat PDFMaker Addin worked fine in Office 2010. Now, I get an error message: Not loaded. A runtime error occurred during the loading of the COM Add-in.
I use Adobe Acrobat X Professional.
I have restarted Outlook, restarted my computer, and nothing changes.
Does anyone have a solution?
SteveI do not think that AA X is compatible with the newest versions of OFFICE and such. Your only choice is to print to the Adobe PDF printer or use the MS plugins to create PDFs.
-
An error occurred in the privileges module... appleshare IP share disk
Machine:
G4 Mini Tower (Graphite)
Mac OS 9.2
AppleShare IP 6.3
This machine whilst dated has been hosting our files for years without issue.
The files we share across the network are on a FireWire disk. We had to replace the disk with a newer version, of exactly the same size (250gb) but if the machine is rebooted, the FILE SERVER blinks indefinately and no volumes are shared.
If the machine is booted without the FireWire volume mounted, the FILE SERVER starts within a matter of seconds. I can then mount the Firewire volume fine. When I lanch Privileges and navigate to the FireWire volume and select Choose, I get the error:
An error occurred in the Privileges module in entry point "RACMMenu Item Selected". A programmer error has occurred. -50
I have read an article in the knowledge base - but this only refers to using OS9 in Classic mode. I can confirm that we are not using OSX just OS9.2 and AppleShare IP 6.3
Any suggestions would be welcomed!
ThanksWhen File Sharing starts up on a "regular" Mac OS 9 system that does not generally have File Sharing turned on, the disk being shared chugs away for several minutes building the invisible file with the privileges in it before finally acknowledging that File Sharing is ON.
One possibility is that you may not be waiting long enough. (Long enough may be overnight on a really big Volume with a FireWire interface.)
-50 paramErr Error in user parameter list
so I expect it is what it says -- the programmer made an error in a procedure call and you are the first one to find it. -
A C-runtime error occured (bad allocation) from xmlViewService
Hi There,
I have a .NET code which calls OBI webservice xmlViewService. I observed xmlViewService.executeXMLQuery works fine when there are records between 0 - 80000, but when records go beyond 80000-100000 it fails & returns an exception "A C-runtime error occured (bad allocation)".
I tried gradually increasing the maxRowsPerPage from 10 to 100000 but in vain.
Below is the code am using:
sawSessionService = new SAWSessionService(obieeWebServiceUrl);
sawSessionService.Timeout = obieeTimeout;
XmlViewService xmlViewService = new XmlViewService(obieeWebServiceUrl);
xmlViewService.Timeout = obieeTimeout;
SAWSessionParameters sawSessionParms = CreateSawSessionParameters();
AuthResult logonResult = sawSessionService.logonex(obieeUserId, obieePassword, sawSessionParms);
sessionID = logonResult.sessionID;
ReportRef reportRef = new ReportRef();
reportRef.reportPath = request.ReportPath;
XMLQueryExecutionOptions xmlQueryOptions = new XMLQueryExecutionOptions();
xmlQueryOptions.async = false;
xmlQueryOptions.refresh = false;
xmlQueryOptions.maxRowsPerPage = 100000; //10;
xmlQueryOptions.presentationInfo = true;
xmlQueryOptions.type = "";
ReportParams reportParams = new ReportParams();
QueryResults queryResults = new QueryResults();
queryResults = xmlViewService.executeXMLQuery(reportRef, XMLQueryOutputFormat.SAWRowsetSchemaAndData, xmlQueryOptions, reportParams, sessionID);
Please help me solving the issue. Highly Appreciate any help.
Thanks - harry
Edited by: 887426 on Sep 26, 2011 12:45 AMHi Harry,
We face this issue, when the criteria returns lot of data. Is the issue resolved for you now? If yes, can you share your solution.
Thanks,
madhu -
C-runtime error occured "Out of Memory"
Cannot display the selected records when an end user clicks the (>*) button next to the record count. Instead of displaying all the records based on the prompted selection criteria, the record count (28,338) is shown by itself without the data after a few minutes of waiting. Above the record count and selected prompts, "!error: A C-runtime error occurred (Out of Memory)" is shown twice. No data.
So long as the end user does not click the (>*) button next to the record count, everything works okay. End user can download the entire set of selected records to a tab-delimited .csv file without any problem. End user can also scroll thru the 28,338 records, one page at a time. Using more restrictive selection criteria, I can view several thousand records at a time. No problem until the (>*) button is clicked when 28,338 records are requested.
We recently doubled the memory on our desktops from 1GB to 2GB. No help attempting to display all records.
Problem reproduced at will in both OBIEE 10.1.3.3.2 and 10.1.3.4.1 environments using either IE 8.0 or Firefox 3.6 on Windows XP Pro.
How can we reconfigure our environment to display the 28,338 records on a desktop without running Windows XP out of memory?The C:\OracleBIData\tmp directory on the desktop appears empty before, during and after the query.
In addition in Windows Task Manager, the Networking tab for the Local Area Connection shows a steady, but less than 0.5%, activity stream for the duration. CPU use and paging is also minimal.
Edited by: bobatx on Dec 23, 2010 10:04 AM -
Portal Runtime Error occurred when trying to create iView using template.
Hi,
When I tried to create an iView by Content Management through "Existing iView Templates", the Portal runtime error occurred.
(However, when I tried to create an iView through "Deployed Portal Archive" or "Web Dynpro Java Application", it was successful)
If you know the same error and the way to solve, please help me.
Best Regards,
Daisuke Ikari
It occurred below system environment.
Version: NetWeaver 7.0 SPstack18
OS: Windows 2003 Server SP2
RDBMS: Oracle 10.2.0.2
And the error log is below.
08:29_26/03/09_0002_6759950
[EXCEPTION]
java.lang.NoSuchMethodError: com.sapportals.portal.pcd.gl.PcdSearchControls.addExplicitAttributeCheck(Lcom/sapportals/portal/pcd/gl/IPcdAttribute;)V
at com.sap.portal.pcm.iviewserver.cache.TemplatesCacheSrv.getPCDCatalog(TemplatesCacheSrv.java:184)
at com.sap.portal.pcm.iviewserver.cache.TemplatesCacheSrv.refresh(TemplatesCacheSrv.java:589)
at com.sap.portal.pcm.iviewserver.cache.TemplatesCacheSrv.getTemplates(TemplatesCacheSrv.java:646)
at com.sapportals.admin.templateselection.panes.InitPane.getCatalogList(InitPane.java:206)
at com.sapportals.admin.templateselection.panes.InitPane.initTemplateList(InitPane.java:122)
at com.sapportals.admin.templateselection.panes.InitPane.processInput(InitPane.java:59)
at com.sapportals.admin.wizardframework.core.WizardInstance.doPost(WizardInstance.java:350)
at com.sapportals.admin.wizardframework.core.WizardInstance.doWizard(WizardInstance.java:174)
at com.sapportals.admin.wizardframework.core.WizardInstance.doWizard(WizardInstance.java:99)
at com.sapportals.admin.wizardframework.AbstractDynamicWizard.doContent(AbstractDynamicWizard.java:98)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
at com.sapportals.appdesigner.appdesignerfw.TabContentComponent.doOnNodeReady(TabContentComponent.java:110)
at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:388)
at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:252)
at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:368)
at com.sapportals.portal.prt.pom.AbstractNode.addChildNode(AbstractNode.java:340)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:642)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)Thanks for your help. Here is the xml
<PAREVAHRS>
<P_PROJECT_TYPE>Food Equipment</P_PROJECT_TYPE><P_PRJ_CATEGORY>Qualification</P_PRJ_CATEGORY><P_CPM_ID>658</P_CPM_ID><P_FROM_DATE>2007/03/01 00:00:00</P_FROM_DATE><P_TO_DATE>2007/03/31 00:00:00</P_TO_DATE>
<LIST_G_PROGRAM>
<G_PROGRAM>
<PROGRAM_CODE>0180</PROGRAM_CODE>
<PROGRAM_NAME>Food Equipment</PROGRAM_NAME>
<LIST_G_MGR>
<G_MGR>
<PROJ_MGR>Lamoreaux, Mr. David</PROJ_MGR>
<LIST_G_PRJ>
<G_PRJ>
<PROJECT_NUMBER>249400</PROJECT_NUMBER>
<LONG_NAME>KM-60, 100 & 150 BAH, ICE MAKE 249400</LONG_NAME>
<CUSTOMER_NUMBER>22460</CUSTOMER_NUMBER>
<CUSTOMER_NAME>HOSHIZAKI AMERICA, INC.</CUSTOMER_NAME>
<LIST_G_TSKEXP>
<G_TSKEXP>
<TASK_NUMBER>PO01START</TASK_NUMBER>
<EXP_TYPE>100 Labor - Chargeable</EXP_TYPE>
<EXP_DATE/>
<QTY>9.25</QTY>
<REV>0</REV>
</G_TSKEXP>
</LIST_G_TSKEXP>
<PRJREV>0</PRJREV>
<PRJQTY>9.25</PRJQTY>
</G_PRJ>
The PRJREV and PRJQTY is at the same level and they are either zero or non null values.
- Vasu - -
Runtime error Bex Query Execution
Hi guys,
I'm facing an BW-BEX error, when I Execute a Bex Query that supposed to
make some time to retreive data, about 30000 records, un Excel runtime
error occurs
with the same query but enough restricted to retreive less than 5000
records, this time it works fine
This bug occurs on any PC workstation not only on my computer.
ST22 shows no thing abnormal.
ON RSRT, it works fine
Any Idea ?I had this in the Bex Log file
ListSeparator: ,
ExcelVersion: 11.0
AddinVersion: 7005.5.1502.949
GetSystemInformation
SUNI Const: 0
CommunicationFactory.GetSystemInformation (Setting Conn 1)): 0
CommunicationFactory.GetSystemInformation (Setting Conn 2)): 0
CommunicationFactory.GetSystemInformation (Setting init Propties)): 0
CommunicationFactory.GetSystemInformation (SUNI.FUNCTION_EXISTS)): 0.779665
RSR_XLS_RFCtrc: 3.898325
CommunicationFactory.GetSystemInformation (RSR_XLS_NET_INTERFACE)): 6.393253
CommunicationFactory.GetSystemInformation (XML Stuff)): 8.576315
CommunicationFactory.GetSystemInformation (Prop Stuff)): 8.576315
CommunicationFactory.GetSystemInformation (Version)): 8.576315
CommunicationFactory.ObtainSystemInformationandCheckVersion (GetSysInfo)): 8.732248
CommunicationFactory.ObtainSystemInformationandCheckVersion (CheckAfterLogin)): 0.155933
CommunicationFactory.LogOnUsingComConnection (ObtainSystemInfo)): 8.888181
CommunicationFactory.LogOnUsingComConnection (MainConnectionChangedEvent)): 0.935598
CommunicationFactory.LogOn: 10.135645
BExCheckFrontend.CheckFrontend: No Check performed (20071119) 0
RSR_XLS_RFCtrc: 0.467799
BExThemes.LoadFromBackend: 2.338995
BExThemes.LoadFromBackend: 0
BExConnect.LogOn: 91.220805
RSR_XLS_RFCtrc: 0.155933
RSR_XLS_RFCtrc: 0.155933
OpenWorkbookGetTheMimeAndStoreItOnTemp
BExProperties.CreateFromDeSer: CompId was not provided!
BExItems.CreateFromDeSer: Trying to deserialize the Items...
BExApplication.AfterRender: 01Pas de cellules correspondantes.
BExApplication.AfterRender: 01Pas de cellules correspondantes.
OpenWorkbookOpenTheSavedWorkbook 4
RSR_XLS_RFCtrc: 1.091531
RSR_XLS_RFCtrc: 0.935598
RSR_XLS_RFCtrc: 0.623732
BExProperties.CreateFromDeSer: CompId was not provided!
RSR_XLS_RFCtrc: 0
RSR_XLS_RFCtrc: 0.311866
RSR_XLS_RFCtrc: 0.467799
RSR_XLS_RFCtrc: 0.155933
RSR_XLS_RFCtrc: 2.338995
RSR_XLS_RFCtrc: 0
RSR_XLS_RFCtrc: 0.311866
RSR_XLS_RFCtrc: 0.155933
RSR_XLS_RFCtrc: 0.779665
RSR_XLS_RFCtrc: 2.338995
RSR_XLS_RFCtrc: 0.311866
RSR_XLS_RFCtrc: 282.082797
RSR_XLS_RFCtrc: 1.403397
RenderIndent: 1.24736
RenderBorders: 0.156032
RenderHierarchyShapes: 0
7.0 Workbook : SAPBEXonRefresh exit called
BExApplication.AfterRender: 01Pas de cellules correspondantes.
BExApplication.AfterRender: 01Pas de cellules correspondantes.
RSR_XLS_RFCtrc: 0.155933
RSR_XLS_RFCtrc: 3.898325
RSR_XLS_RFCtrc: 0.155933
RSR_XLS_RFCtrc: 0.155933
RSR_XLS_RFCtrc: 0.155933
RSR_XLS_RFCtrc: 0.467799
RSR_XLS_RFCtrc: 1.871196
RSR_XLS_RFCtrc: 0.155933
RSR_XLS_RFCtrc: 2448.469559
11/20/2007 5:07:42 PM----
System.Exception: BExConnect.BExWorkbook: Exception ---> System.OutOfMemoryException: Exception of type System.OutOfMemoryException was thrown.
--- End of inner exception stack trace ---
at com.sap.bi.et.analyzer.addin.BExConnect.get_BExWorkbook(String iWorkbookName, Boolean iConstruct)
at com.sap.bi.et.analyzer.addin.BExMenu.UpdateMenuSubMenuControls()
at com.sap.bi.et.analyzer.addin.BExMenu.UpdateMenu()
at com.sap.bi.et.analyzer.addin.BExMenu.Update()
at com.sap.bi.et.analyzer.addin.BExMenu.CommunicationFactory_MainConnectionChanged(BExCommunicationEventArgs iArguments)
at com.sap.bi.et.Communication.MainConnectionChangedEventHandler.Invoke(BExCommunicationEventArgs iArgs)
at com.sap.bi.et.Communication.CommunicationFactory.LogOff()
at com.sap.bi.et.analyzer.api.BExConnectionLostException..ctor(Exception iException, BICS_PROV_T_MESSAGE itMessage)
at com.sap.bi.et.analyzer.api.BExDataProvider.RetrieveResultSet()
at com.sap.bi.et.analyzer.api.BExApplication.GetTemplate(Boolean iDoNotReadData)
BExConnect.BExWorkbook: Exception
at com.sap.bi.et.analyzer.addin.BExConnect.get_BExWorkbook(String iWorkbookName, Boolean iConstruct)
at com.sap.bi.et.analyzer.addin.BExMenu.UpdateMenuSubMenuControls()
at com.sap.bi.et.analyzer.addin.BExMenu.UpdateMenu()
at com.sap.bi.et.analyzer.addin.BExMenu.Update()
at com.sap.bi.et.analyzer.addin.BExMenu.CommunicationFactory_MainConnectionChanged(BExCommunicationEventArgs iArguments)
at com.sap.bi.et.Communication.MainConnectionChangedEventHandler.Invoke(BExCommunicationEventArgs iArgs)
at com.sap.bi.et.Communication.CommunicationFactory.LogOff()
at com.sap.bi.et.analyzer.api.BExConnectionLostException..ctor(Exception iException, BICS_PROV_T_MESSAGE itMessage)
at com.sap.bi.et.analyzer.api.BExDataProvider.RetrieveResultSet()
at com.sap.bi.et.analyzer.api.BExApplication.GetTemplate(Boolean iDoNotReadData) -
Not Loaded. A runtime error occurred during the load of the COM add-in.
Hey All!
I am relatively new to Hyperion, and need some help. I recently purchased a new laptop, and I am trying to reinstall Smart View 11.1.2.1 on my home system, but I continue to run into difficulties. I launch the Smart View installer by right-clicking and selecting "Run as Administrator," and everything seems to install successfully. However, when I open Excel or any Microsoft Office product, the Smart View tab is unavailable, and when I Manage my COM add-ins, the pop-up box reads "Load Behavior: A runtime error occurred during the loading of the COM add-in."
I have looked into my registries, and everything seems to be in order. I have changed my load behavior back to 3 as well. Any ideas? Are there any compatibility issues I need to consider? Thanks for your help!
CraigPLEASE do not do this! You are storing up trouble for the future that will be so much harder to unpick.
1. It does not solve the problem. Whatever the problem was, this is not the solution! If the issue is multiple DLLs, you need to delete the duplicates and register the correct ones, not make even more copies. If the problem is permissions, you need to sort that one out.
2. If it appears to solve the problem, then the problem (something to do with permissions) needs to be solved at source, not kludged round like this.
3. If there is an unresolved problem on the system, it is more likely that the next upgrade will not go well.
4. Uninstaller cannot remove the copies you made manually. The same thing applies to upgrades! You risk getting mixed versions afterwards.
My first steps to resolve this problem would be:
1. Uninstall the SmartView client. You must be an administrator to do this -- try to be the same administrator that installed it.
2. Clean up. Make sure the files are all deleted. Search the whole box for old files (HsTBar.xla, HsAddin.dll etc.) possibly left over from an old installation -- you might have upgraded into a different location at some time in the past and left orphaned files hanging around. Get rid.
3. Reboot. Log in as a local administrator.
4. Open Excel and visit the Add-Ins dialog and remove any entries for SmartView.
5. Install SmartView client from a local copy of SmartView.exe -- make sure you have the correct version.
That solves 99% of problems like this. If you have to register the DLLs manually, it suggests that your 'administrator' account doesn't have the full rights you think it has. DON'T kludge it by copying DLLs into your profile!
Thanks. -
B2C webshop - A runtime error occurred
Dear all,
Our B2C webshop is down and giving the error
"A runtime error occurred - Contact the administrator - Start application"
I have restarted the application but still getting the same error not sure what happend.Hi Mark,
From the logs I could see the below entries. It shows some issue with Product cateloguage. Please advice.
Feb 25, 2009 2:28:55 PM bctracing.isa.runtime [SAPEngine_Application_Thread[impl:3]_29] Debug: [(J2EE1979100)ID2023208650DB02706280855622221063End|?][actionxecution]='end' [actionclass]='com.sapmarkets.isa.isacore.action.ShopReadAction' [path]='/b2c/readshop' [forward]='/catalog/ISAEntry.do' [exectime]='15171'
Feb 25, 2009 2:28:55 PM bctracing.isa.runtime [SAPEngine_Application_Thread[impl:3]_29] Debug: [(J2EE1979100)ID2023208650DB02706280855622221063End|?][actionxecution]='begin' [actionclass]='com.sapmarkets.isa.catalog.actions.ISAEntryAction' [path]='/catalog/ISAEntry'
Feb 25, 2009 2:28:55 PM bctracing.isa.runtime [SAPEngine_Application_Thread[impl:3]_29] Debug: [(J2EE1979100)ID2023208650DB02706280855622221063End|?][jcofuncionexecution]='begin' [funcname]='CRM_PCAT_IMS_IDXCAT_GETLIST' [ashost]='crmdb' [sysid]='PCR'
Feb 25, 2009 2:28:55 PM bctracing.isa.runtime [SAPEngine_Application_Thread[impl:3]_29] Debug: [(J2EE1979100)ID2023208650DB02706280855622221063End|?][jcofunctionexecution]='end' [funcname]='CRM_PCAT_IMS_IDXCAT_GETLIST' [ashost]='crmdb' [sysid]='PCR' [exectime]='110'
Feb 25, 2009 2:28:55 PM bctracing.isa.runtime [SAPEngine_Application_Thread[impl:3]_29] Debug: [(J2EE1979100)ID2023208650DB02706280855622221063End|?][actionxecution]='end' [actionclass]='com.sapmarkets.isa.catalog.actions.ISAEntryAction' [path]='/catalog/ISAEntry' [forward]='/b2c/error.jsp' [exectime]='532' -
Saw: C-runtime error occured (bad allocation)
We are running into an issue with the Prod Web Server, wherein it is suddenly stops once in a while and does not restart unless we reboot. We seem to have two issues going on
1) What brings down the server in the first place?
From the logs it looks like 3 of th last 4 times it failed, it was due to the Drifted Accounts report. The specific error is below. It seems that somehow this report is triggering the saw server to fail (no impact on the analytics server).
Type: Error
Severity: 25
Time: Wed Oct 29 09:54:49 2008
File: project/webcube/cubecache.cpp Line: 249
Properties: RptPath-/shared/IRIT/45 - Service/Report #8 - Accounts Summary Report;DashPath-/shared/IR Core Service Dashboard/_portal/IR Core Service 1. Summary Reports;DashPagePath-/shared/IR Core Service Dashboard/_portal/IR Core Service 1. Summary Reports/Drifted Accounts;SID-vff5to3ductfhfrtgvc2oi8vtq;ThreadID-3428;HttpCommand-Dashboard;RSP-d:dashboard~p:u673vcdbvpa7b12p~r:anokhgbsd4jnr317;RemoteIP-10.201.0.48;User-Administrator;HttpArgs-_scid='*YuesJlTN7Y'
Location:
saw.cube.cache.processCube
saw.views.pivottable.displayer
saw.views.dashboard
saw.subsystem.portal
saw.httpserver.request
saw.rpc.server.responder
saw.rpc.server
saw.rpc.server.handleConnection
saw.rpc.server.dispatch
saw.threadPool
saw.threads
A C-runtime error occured (bad allocation)
2) What prevents the service from restarting unless the server is rebooted.
If we try to restart the saw service we see the foll error message
Type: Error
Severity: 42
Time: Mon Oct 20 10:02:16 2008
File: project/webcomm/socket.cpp Line: 338
Properties: ThreadID-5800
Location:
saw.rpc.server.initialize
saw.sawserver
saw.sawserver.initializesawserver
saw.threads
Port 9710 is in use on the local system. [Socket:512]
Any experience with or insight into this error is appreciated.
Thanks,
TLHave you tried patch 7140673 - OBI PRESENTATION SERVER CRASH IN PIVOT TABLE
-
Getting Err : An error occurred in the message processing program.
Hi, Im wrking with Smartforms.
I have assigned output type LD00 ,with driver prgrm name and Smf name.
after that executing with VL03N , its giving error .
Output could not be issued
Message no. VL086
Diagnosis
An error occurred in the message processing program.
Procedure
Contact your system administrator.
...Actually i have orginal prgrm (zsmf_Orginal) there i had to do some modifications , so after copying that same form into another form(zsmf_Duplicate), i made some changes there, both form are executing in T code SMARTFORMS, but while testing with VL03N , its showing above mentioned err.
Plz have eye on it.
<removed by moderator>
Regards
vivek.
Edited by: vivekd358 on Jul 10, 2010 7:35 AM
Edited by: Thomas Zloch on Jul 12, 2010 11:35 AMclosed
-
i keep getting "an error occurred when installing, please run program again" for OS X mountain lion, how can i fix the problem?
The Reset feature adds a folder on your desktop named Old Firefox Data. I recommend hanging onto that for a few weeks in case you discover something essential that the Reset feature left behind.
This article has a list of what is migrated and what is not during a Reset, in case you're curious: [[Reset Firefox – easily fix most problems]]. -
A Runtime Error occured when viewing topics
Hi,
I got the following message when I'm trying to view one topic
with hyperlink :
"A Runtime Error has occurred. Do you wish to Debug?
Line 2393
Error : Access is denied"
When I click No, the entire topic displayed but the hyperlink
didn't work.
When I try to test the same topic in the CHM, the hyperlink
work well.
I'm using a lot Ctrl+W to made QA on my conditional topic and
I will like to solve this problem.
Can someone may help me?
Thanks!
TW_MaryseCTW_MaryseC
It sounds like your topic has some javascript in it, is that
the case?
If you are not sure, try this. Create a new topic with the
same filename except add _new. Keep cutting and pasting bits of the
content from the problem file and previewing it in the same way you
are now until the error occurs. Then you will know what to look at
and be able to resolve it or post back.
You say "I'm using a lot Ctrl+W to made QA on my conditional
topic..." Ctrl+W is simply a means of previewing a topic. I think
what you are saying here is that you then select a condition to
test the topic is working. But you get the problem before you
select any condition in the preview so I am not sure what you are
saying here. Please clarify.
Avalynn
Whilst you are getting a runtime error it is a different one
so it would have been better to create a new post rather than
hijack this one. It's difficult to answer two people's problems in
one thread.
It sounds like you have a javascript function in the body of
your topic but you do not have anything in the head section to say
where the javascript file is located. Could that be the case?
The trial version should allow you to see your topics
although there is a limit to the number. How many topics do you
have?
Also are you generating the CHM file to your hard disk? -
Runtime error occurs when using DropdownByKey
I run into a runtime error when I use the DropDowByKey with fixed value set: the value seletedKey = "001" in DropDownByKey "DDBK_APP_STATE" does not exist in the value list and is not initial either. But I have already added the value pair of the selectedKey using
"NODE_INFO->SET_ATTRIBUTE_VALUE_SET(
NAME = 'APP_STATE'
VALUE_SET = LT_VALUESET )." and I can select it from view. But when I use the attribute bound to the dropdownbykey in select statement as where condition and bind result into table. Before the screen reflash , the error occurs.I have two dropdownbykeys, DROP1(bound to attribute APP_AGENT),DROP2( bound to attribute APP_STATE). Selecting the first will change the content of the other.
The code in the onSelect event of the drop1, which will change the select list of DROP2:
DATA:NODE_INFO TYPE REF TO IF_WD_CONTEXT_NODE_INFO.
DATA: LT_VALUESET TYPE WDY_KEY_VALUE_TABLE,
L_VALUE TYPE WDY_KEY_VALUE.
NODE_INFO = WD_CONTEXT->GET_NODE_INFO( ).
NODE_INFO = NODE_INFO->GET_CHILD_NODE( 'NODE_SEARCH' ).
"**************************set value set for drop down***************
DATA lo_nd_node_search TYPE REF TO if_wd_context_node.
DATA lo_el_node_search TYPE REF TO if_wd_context_element.
DATA ls_node_search TYPE wd_this->element_node_search.
DATA lv_app_agent LIKE ls_node_search-app_agent.
DATA lv_app_state LIKE ls_node_search-app_state.
navigate from <CONTEXT> to <NODE_SEARCH> via lead selection
lo_nd_node_search = wd_context->get_child_node( name = wd_this->wdctx_node_search ).
get element via lead selection
lo_el_node_search = lo_nd_node_search->get_element( ).
lo_el_node_search->get_attribute(
EXPORTING
name = `APP_STATE`
IMPORTING
value = lv_app_state ).
get single attribute
lo_el_node_search->get_attribute(
EXPORTING
name = `APP_AGENT`
IMPORTING
value = lv_app_agent ). -
get the value of DROP1
clear the selected value of drop down
lo_el_node_search->set_attribute(
EXPORTING
name = `APP_STATE`
value = '' ).----
I want to clear the selected value of DROP2
IF lv_app_agent IS INITIAL.
L_VALUE-VALUE = 'SUBMIT'.
CLEAR L_VALUE-KEY .
INSERT L_VALUE INTO TABLE LT_VALUESET.
NODE_INFO->SET_ATTRIBUTE_VALUE_SET(
NAME = 'APP_STATE'
VALUE_SET = LT_VALUESET ).
exit.
ENDIF.
CASE lv_app_agent .----
there are 2 cases
WHEN 'SUPP_APP'.
L_VALUE-VALUE = 'APPROVE'.
L_VALUE-KEY = '1'.
INSERT L_VALUE INTO TABLE LT_VALUESET.
L_VALUE-VALUE = 'INITIAL'.
L_VALUE-KEY = '0'.
INSERT L_VALUE INTO TABLE LT_VALUESET.
WHEN OTHERS.
L_VALUE-VALUE = 'APPROVE'.
L_VALUE-KEY = '1'.
INSERT L_VALUE INTO TABLE LT_VALUESET.
L_VALUE-VALUE = 'INITIAL'.
"CLEAR L_VALUE-KEY.
L_VALUE-KEY = '000'.
INSERT L_VALUE INTO TABLE LT_VALUESET.
L_VALUE-VALUE = 'REJECT'.
L_VALUE-KEY = '2'.
INSERT L_VALUE INTO TABLE LT_VALUESET.
ENDCASE.
NODE_INFO->SET_ATTRIBUTE_VALUE_SET(
NAME = 'APP_STATE'
VALUE_SET = LT_VALUESET ).
Then in the another method, I will fetch the value of attribute APP_STATE. I can successfully get the value and put it into where clause and get result. But I will get a runtime error then. -
Java iView Runtime error occurs whilw changing Theme Editor
Hi,
i have to face the following error while changing Theme.
<b>Java iView Runtime
Version : 6.4.200512140312
+ Copyright 2002 SAP AG. All rights reserved.
An exception occured while processing your request.
com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in connection
com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in connection
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:304)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: PortalRuntimeException
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:284)
... 20 more
Caused by: java.lang.OutOfMemoryError
If this situation persists, please contact your system administrator.</b>
Please give me right solution.
Thanks & Regards,
Nisarg PatelHi,
Try out the answers given in the following threads:
Theme Editor : Runtime error
Problem with Theme Editor
Regards,
Pooja.
Maybe you are looking for
-
How can i access all the objects of one schema from another schema
Dear All, How can i access all the objects(Tables,Views,Triggers,Procedures,Functions,Packages etc..) and do the modifications of one schema from another schema (Without using synonyms concept). Thanks in advance, Mahi
-
How can I extend the JCA File Adapter
I would like to extend the JCA File adapter. I want to overcome the file size limit of the File Adapter. I want to the JCA Fileadapter to have the following functionalites. 1. Split a file into smaller chunks, The chunk size will be set at design tim
-
InDesign CC fails to remove the pages from the catalog that I have prepared! It stops the program suits the times and I have to make a forced exit! This puts a very important issue! We seek the solution in the short term.
-
Enable Telnet in MAC OS X Lion
How do you enable Telnet Server in Lion? I need to be able to telnet to 127.0.0.1 and it says connection refused when I try it.
-
How to get RMAN catalog information from Target database?
Hi, How to get RMAN catalog information from Target database because i don't know about catalog database? is it possible? Thanks